Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Helle Norway - Utvaer knife by Vox - PRIVATE COLLECTION - No.600 - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In good condition
* Commercially available: YES
* Sharpening: re-sharpened by our in-house laboratory
* Marks on blade: YES, has a number of scratches on the blade
* Marks on handle: None
* Box: Present and complete
* Sheath: Leather sheath
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our internal laboratoryIntended use: hunting/hiking
Type of production: semi-artisanal
Blade: 12C27 stainless steel
Handle: Birch
Blade length: 102mm.
Blade thickness: 3mm.
Total length: 221mm.
Balancing: set back 2.5cm
Weight: 151g.
Sheath: leather
Notes: Design by Jesper VoxnaesAP-HE-600 -
Helle Norway - Utvaer by Vox - No.600 - knife
Destination: hunting / hiking
Type of production: semi-handicraft
Country of production: Norway
Blade: 12C27 stainless steel
Finishing: mirror polishing
Handle: Birch wood
Blade Length: 102mm.
Blade thickness: 3mm.
Total length: 221mm.
Balance: back to 2.5cm
Weight: 151g.
Sheath: leather
Notes: Design by Jesper VoxnaesHE-600 -
Helle Norway - Les Stroud Temagami Knife - Knife - No.301
Helle Norway - Les Stroud Temagami Knife - Knife - No.301
Intended use: huntingType of production: semi-artisan
Blade: carbon steel laminate shirogami with sharp steel 62HRC
Handle: Birch
Blade length: 110mm.
Blade Thickness: 3mm.
Overall length: 230mm.
Balancing: back to 2.5cm
Weight: 154g.
Sheath: Leather
More information: http://www.lesstroud.ca/HE-301 -
Helle Norway - Jegermester - No.42 knife
Intended Use: Hunting
Type of production: industrial
Blade: stainless steel Sandvik 12C27
Treatment Lama: -
Handle: Birch
Blade length: 135mm.
Blade Thickness: 2.5mm.
Length closed: -
Total length: 250mm.
Balance: back to 2.5cm
Weight: 128g.
Closing: -
Clip: -
Sheath: Leather
Notes: -HE-42 -
Helle Norway - Temagami Les Stroud Knife - coltello - No. 1300
Les Stroud was born in Mimico - Ontario in 1961.
Canadian musician, filmmaker and survival expert, Les Stroud is best known as the creator, writer, producer, director, cameraman and star of the television series 'SurvivorMan'.This knife is a collaboration between Les and the famous Norwegian company Helle.
Intended use: hunting
Type of production: semi-crafted
Blade: Sandvik 14C28N steel
Handle: Birch
Blade length: 110mm.
Blade thickness: 3mm.
Total length: 230mm.
Balance: set back 2.5cm
Weight: 143g.
Sheath: leather
More information: http://www.lesstroud.ca/HE-1300 -
Rockstead - HIGO II X-FCF - ZDP-189 & Dark Matter Gold Carbon Fiber - folding knife
Higo is one of the most beloved models for Rockstead Knives fans around the world, and HIGOⅡX, with a custom Dark Matter Gold (DMG) carbon fiber coating and a titanium back layer, is one more step in the pursuit of perfection. The blade is made of ZDP189 super stainless steel and features a unique convexity with gradually reduced angle (30 degrees at the middle and 24 degrees at the tip). The variable blade angle is the result of Rockstead's long quest for superior sharpness and cutting ability.
Blade: ZDP-189 stainless steel at 66.7HRC
Handle: anodized titanium and Dark Matter Gold carbon fiber
Blade length: 89mm.
Blade thickness: 3.2mm.
Total length: 216mm.
Weight: 138g.
Closure: Frame Lock with SKD11 casement at 61HRC
Clip: made of 402J2 steel at 48HRC
Notes: Accompanied by warranty certificate with full technical specificationsRO-HIGIIX-ZDPDMG -
Rockstead - Shin - Clad ZDP189 & Aluminum and Samekawa - folding knife
With Rockstead brand of Ishida Co. Sakai, Japan, they are currently marketed with the best industrial knives currently in production.
Created by Katsumi Kitano, who for 20 years has been producing quality knives so much to have been awarded the highest award among the knife craftsmen in Japan, you demonstrate exceptional both in cutting capacity, penetration and tightness of the wire both in terms of innovation for and materials used for the construction techniques.
Blade: ZDP189 rolled stainless steel at 66.6 HRC inside and VG10 at 60.8 HRC outside
Handle: Same (real ray skin) and aircraft aluminum with black alumite treatment to HV400
Blade length: 95 mm.
Blade thickness: 4 mm.
Overall length: 210 mm.
Weight: 145 g.
Lock: Liner Lock steel in 52HRC 402J2
Clip: Steel 402J2 to 52HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.RO-SHIN-ZDP -
Rockstead - Hizen - DLC YXR7 & Duralumin - Folding Knife
With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and hold of the thread and in innovation for the materials used and for construction techniques.
Intended use: Collection / SportsType of production: Midtech
Country of production: Sakai - Japan
Blade: in Hitachi YXR7 steel at 64HRC
Blade treatment: Black DLC mirror
Handle: A7075 Duralumin with Hv400 hardness anodizing
Blade length: 70mm.
Blade thickness: 3.3mm.
Length closed: 104mm.
Total length: 176mm.
Thick when closed: 11.4mm.
Weight: 74g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel of 1mm. with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: -RO-HIZ-DLC -
Rockstead - Hizen - ZDP-189 & Duralumin - Folding Knife made in Japan
Blade: stainless steel ZDP-189 to 67.2HRC
Handle: Duralumin A2024 with anodized surface to HV400
Blade length: 73 mm.
Blade Thickness: 3.5 mm.
Overall length: 176 mm.
Weight: 172 g.
Lock: Frame Lock with a swing in SKD11 61HRC
Clip: Steel 402J2 to 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.RO-HIZ-ZDP189 -
Rockstead - 2010 Higo-MH-DLC Serial #303 - YXR7 HPC & Micarta - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: -
* Marks on handle: - -
* Box: marketed in silk pouch.
* Scabbard: Leather, belt, original, with a few small marks given by time.
* Manuals, Certificates and Warranties: present.
* Checked and Certified by our in-house laboratory
The HIGO-MH-DLC folder features a 3.5-inch YXR7 blade with DLC coating and Micarta handle. The incredible mirror finish is achieved by heat treating the blade and gradually grinding by hand with wet and dry sandpaper of 400, 600, 800, 1,200 and 2,000. The HIGO-MH-DLC comes with a black leather belt case with a slot to hold the included torx wrench.
Country of manufacture: Japan
Type of manufacture: midtech
Blade: DLT571 steel (Hitachi YXR7 at 64.1HRC with 3micron HPC coating and hardness of Hv1300)
Handle: 2mm stainless steel sus402J2 at 52HRC with micarta handles
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 216mm.
Weight: 139g.
Closure: Liner Lock
Clip: stainless steel
Notes: Serial number 303 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially availableRO-HIMHDLC-CP -
Rockstead - 2010 Higo-ST Serial #005 - YR7 HPC & Duralumin - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.
The best industrial knives currently in production are marketed under the Rockstead brand. Created by Katsumi Kitano, who has been making quality knives for more than 20 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in the level of innovation for the materials used and construction techniques.
Country of production: Japan
Type of production: midtech
Blade: Hitachi YXR7 steel at 64.8HRC with 3micron HPC coverage and hardness of Hv1800
Handle: Duralumin A2024 with surface anodizing and hardness of Hv400
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 215mm.
Weight: 130g.
Closure: Frame Lock with SKD11 casement at 61HRC
Clip: made of 402J2 steel at 48HRC
Notes: Serial number 005 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially availableRO-HISTHPC-CP -
Rockstead - CHI ZDP - Shinogi Zukuri Clad Steel SanMai ZDP189 - knife made in Japan
Under the brand name Rockstead, from Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently marketed: created by Katsumi Kitano, who has been making quality knives for over 30 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in innovation in the materials used and construction techniques.
Intended Use: Collection/Sportsman
Type of production: Midtech
Country of manufacture: Sakai - Japan
Blade: rolled stainless steel ZDP189 at 66.4 HRC on the inside and VG10 at 61.3 HRC on the outer cheeks
Blade treatment: mirror polish
Handle: Aluminum A6063S with anodization to Hv400 hardness and genuine Breed leather inserts
Blade length: 82mm.
Blade thickness: 3.7mm.
Length closed: 111mm.
Total length: 189mm.
Thickness when closed: 16.2mm.
Weight: 133g.
Opening: via ambidextrous pin
Washers: steel
Closure: Sub FrameLock of 2mm. made of SUS402J2 stainless steel at 50HRC
Clip: deep pocket, 1mm. 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: Shinogi Zukuri type blade sharpeningR-CHIZDP -
Bark River - Bravo 1 Field Knife - Mil-Spec - Camo G-10 - COLLEZIONE PRIVATA - coltello
COLTELLO RITIRATO DA COLLEZIONE PRIVATA
* Tipologia: Precedentemente Acquistato
* Condizioni: Globalmente in buone condizioni
* Reperibile in commercio: non più in produzione
* Affilatura: Di fabbrica
* Segni su lama: Leggeri
* Segni su impugnatura: No
* Scatola: Non presente
* Fodero: In Cuoio
* Manuali, Certificati e Garanzie: NO
* Controllato e Certificato dal nostro laboratorio internoDestinazione d'uso: Tattico/Collezione
Tipo di produzione: Semi-Industriale
Paese di produzione: USA
Lama: in acciaio inox CPM-S35VN
Trattamento lama: satinatura
Manicatura: G-10 Camo
Lunghezza lama: 110mm.
Spessore lama: 5.5mm.
Lunghezza totale: 244mm.
Bilanciatura: arretrata di circa 2 cm dal bordo della guancetta
Peso: 240g. (350g. fodero compreso)
Fodero: In cuoio
Confezione: privo di scatola e certificati
Note: -AP-BRAVO1 -
Helle Norway - Vintage Fabrikker Norway knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in excellent condition, it has some marks on the blade from the years
* Available on the market: no longer in production, difficult to find, dating back to the 90s
* Sharpening: Original
* Marks on the blade: small scratches
* Marks on the handle: no
* Box: without box
* Sheath: in brown leather
* Manuals, Certificates and Warranties: absent
* Checked and certified by our internal laboratoryIntended use: hunting
Type of production: industrial
Blade: Sandvik 12C27 stainless steel
Blade treatment: -
Handle: leather discs
Blade length: 150mm.
Blade thickness: 2.5mm.
Closed Length: -
Total length: 270mm.
Balance: set back to 2.5cm
Weight: 220g.
Closure: -
Clip: -
Sheath: leather
Note: -HE-FAB -
BlackJack - Model 5 knife - A2 - Green Canvas Micarta - outdoor knife
Intended use: hunting / sports / collection
Type of production: industrial
Blade: A2 carbon steel
Production Lama: USA
Handle: Green Canvas micarta
Blade length: 140mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 270mm.
Balancing: -
Weight: 262g.
Closure: -
Clip: -
Sheath: Brown Leather
Notes: made by Bark RiverBCB5GM -
Bark River - Sandstorm - CPM154 Steel - Green Canvas - BA07150MGC - knife
Intended use: Hunting / Utility
Type of production: Semi-Industrial
Country of production: USA
Blade: CPM-154CM stainless steel
Blade treatment: satin finish
Handle: Micarta
Blade length: 127mm.
Blade thickness: 5mm.
Total length: 244mm.
Balancing: advanced
Weight: 168g.
Sheath: In leather
Packaging: Cardboard box with Bark River logos
Note: -BA07150MGC -
Bark River - Bravo 1 Field knife - A2 Steel - Green Canvas - BA07112MGC - knife
Intended use: Outdoor
Type of production: Semi-Industrial
Country of production: USA
Blade: A2 steel
Blade treatment: satin finish
Handle: Micarta
Blade length: 10mm.
Blade thickness: 5mm.
Total length: 230mm.
Balancing: advanced
Weight: 192g.
Sheath: In leather
Packaging: Cardboard box with Bark River logos
Note: -BA07112 -
Bark River - Bravo 1.5 Field knife - CPM 3V - Black Canvas - BA07124LT - knife
Intended use: Outdoor
Type of production: Semi-Industrial
Country of production: USA
Blade: CPM-3V steel
Blade treatment: satin finish
Handle: Micarta
Blade length: 145mm.
Blade thickness: 4mm.
Total length: 270mm.
Balancing: advanced
Weight: 194g.
Sheath: In leather
Packaging: Cardboard box with Bark River logos
Note: -BA07124LT -
Bark River - Bravo Survivor knife A2 - Green Canvas - BA07116MGC - knife
Intended use: Outdoor / Tactical
Type of production: Semi-Industrial
Country of production: USA
Blade: A2 steel
Blade treatment: satin finish
Handle: Micarta
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 315mm.
Balancing: advanced
Weight: 480g.
Sheath: In leather
Packaging: Cardboard box with Bark River logos
Note: -
Send feedback
History
Saved07116MGC -
Rockstead - Higo II F-HTI-ZDP - Titanium ZDP-189 - knife
With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and tightness of the thread and in innovation for the materials used and for construction techniques.
Intended use: Collection / SportsType of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.5HRC
Blade treatment: mirror polished
Handle: titanium
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 12.2mm.
Weight: 136g.
Opening: through ambidextrous pin
Washers: in brass
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Serial number # 096 - Date of production 05 July 2019HIGOIIHTIZ -
Rockstead - Shin knife DLC - YXR7 - knife
This knife blade is convex on both sides in the tradition of the highly praised Japanese sword. This shape is both sharp and strong, and can still slice cleanly through a sheet of paper even after the punishment of chopping and cutting through dried bamboo. Using this special blade shape is an excellent way of allowing an edge to be thick without sacrificing any of its sharpness. This knife is of preeminent sharpness. This is a durable knife with strong cutting capabilities that will last for a long time. Even when used for rigorous cutting, the blade will not bite or catch thanks to its convex shape. Other knives will often bite or catch, and may acquire nicks if pulled out suddenly.
Blade: XR-7 steel at 64.3 HRC with DLC treatment
Handle: Same (real breed leather) and aeronautical aluminum with Hv400 black alumite treatment
Blade length: 95 mm.
Blade thickness: 4 mm.
Total length: 210 mm.
Weight: 145 g.
Closing: Liner Lock in 402J2 steel at 52HRC
Clip: in 402J2 steel at 52HRC
Notes: Accompanied by a warranty certificate with technical specifications.RS-SHIN-B -
Rockstead - Higo II X-CF-ZDP - Carbon Fiber ZDP-189 - knife
With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and hold of the thread and in innovation for the materials used and for construction techniques.
Intended use: Collection / SportsType of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.4HRC
Blade treatment: mirror polished
Handle: anodised titanium and carbon fiber
Blade length: 89mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 15.8mm.
Weight: 133g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Serial number # 028 - Date of production April 23, 2019HIGOIIXCF -
Bark River - Bravo Tope Record - Black Canvas - 10-221M-BC - knife
Intended use: Outdoor / Tactical
Type of production: semi-industrial
Country of production: USA
Blade: full tang in CPM-3V steel
Blade treatment: satin finish
Handle: Micarta
Blade length: 195mm.
Blade thickness: 5mm.
Total length: 327mm.
Balancing: advanced
Weight: 380g.
Sheath: in leather
Packaging: Cardboard box with Bark River logos
Note: -BR-BTRB -
Rockstead - Chou HPC - Black Silk - neck knife
With the Rockstead brand, of Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently being marketed.
Created by Katsumi Kitano, who has been producing quality knives for over 20 years, to the extent that they have been awarded the highest recognition among the artisanal cutlers in Japan, they prove to be exceptional both in cutting, penetration and thread strength and in terms of innovation for the materials used and for construction techniques.
Blade: Hitachi YXR7 65HRC steel with HPC titanium cover
Handle: interweaving in silk tied by hand
Blade length: 45 mm.
Blade thickness: 4 mm.
Total length: 120 mm.
Weight: 60 g.
Sheath: neck, in Kydex
Notes: Accompanied by silk bag and certificate of guarantee with technical specifications.4069BLACK -
Rockstead - TEI DLC - 65hrc - knife collection
This knife can still slice paper even after the punishment of striking and cutting dried bamboo.This knife has a beautiful convex surface with extreme sharpness.This is a flagship of the ROCKSTEAD folding knife collection. Both sides of the blade are convex. The blade is in the shape of the traditional Japanese sword. It cuts well and is strong. You can enjoy its strong cutting capabilities for a long time.
Full length: 213.00 mm
Blade length: 93.00 mm
Weight: 155 g
Thickness: 3.70 mm
Material: YXR7
Hardness: HRC65
Blade geometry: Honzukuri
Hard coating: DLC
Knives type: FolderRO-TEI -
Rockstead - Chou HPC Ironwood - Neck Knife - Knife
With Rockstead brand of Ishida Co. Sakai, Japan, they are currently marketed with the best industrial knives currently in production.
Created by Katsumi Kitano, who for 20 years has been producing quality knives so much to have been awarded the highest award among the knife craftsmen in Japan, you demonstrate exceptional both in cutting capacity, penetration and tightness of the wire both in terms of innovation for and materials used for the construction techniques.
Use: utility / Neck KnifeProduction Country: Japan
Blade: stainless Hitachi YXR7 to 65HRC
Finish: HPC titanium
Handle: Ironwood
Blade length: 45 mm.
Blade thickness: 4 mm.
Overall length: 120 mm.
Weight: 60 g.
Sheath: neck, Kydex thermoformed
Notes: Accompanied by a certificate of guarantee with technical specifications4069IW -
Helle Norway - Skala Foldekniv knife - No.212
Intended use: hunting
Type of production: Industrial
blade production: Norway
Blade: 12C27 stainless steel 59HRC
Blade treatment: -
manicatura: cocobolo wood
Blade length: 85mm.
blade thickness: 3mm.
Closed length: 115
Total length: 200mm.
thick when closed: 1.8 cm
Weight: 117g.
Closing: back lock
Clip: -
Sheath: Brown leather
Packaging: cylindrical cardboard box more cloth cotton branded Helle
Notes: -HE-212 -
Rockstead - SHUN Titanium ZDP-189 by Sinkevich - knife
Con il marchio Rockstead, della Ishida Co. di Sakai, in Giappone, sono attualmente commercializzati i migliori coltelli industriali attualmente in produzione.
Creati da Katsumi Kitano, che da oltre 20 anni produce coltelli di qualità tanto da esser stato insignito del massimo riconoscimento tra i coltellinai artigiani in Giappone, si dimostrano eccezionali sia in capacità di taglio, penetrazione e tenuta del filo sia a livello di innovazione per i materiali utilizzati e per le tecniche costruttive.
Lama: acciaio laminato con guance esterne in VG10 e tagliente in ZDP-189 a 66/67HRC con finitura a specchio
Manicatura: Titanio anodizzato
Lunghezza lama: 105 mm.
Spessore della lama: 3,8 mm.
Lunghezza totale: 190 mm.
Peso: 159g.
Chiusura: Frame Lock con battente in acciaio inox
Clip: Deep pocket, amovibile, in acciaio inox SUS420J2 a 50HRC
Note: Design by Sinkevich - accompagnato da certificato di garanzia con specifiche tecniche dettagliate12431 -
BladeTech - Riptide Karambit - knife
Intended use: Tactical
Type of production: Industrial
Production Lama: Taiwan
Blade: 440C stainless steel
Treatment Blade: Teflon
Handle: Zytel
Blade length: 60mm.
Blade thickness: 3mm.
Closed Length: 135mm.
Overall length: 185mm.
Thick when closed: -
Balancing: -
Weight: 120g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Blade Tech
Note: Opening system Wave, with patent Emerson12063 -
Rockstead - SAI Titanium ZDP-189 - knife
Rockstead - SAI Titanium ZDP-189 - knife
Blade: ZDP-189 in 66.8HRC
Handle material: titanium
Blade length: 80 mm.
Blade Thickness: 3.7 mm.
Overall length: 190 mm.
Weight: 140g.
Closure: liner lock
Sheath: Black leather
Notes: Accompanied by a certificate of guarantee with the technical specifications.SAI -
Rockstead - Higo-X-IW - Ironwood ZDP-189 - knife
Rockstead - Higo-X-IW - Ironwood ZDP-189 - knife
With the brand Rockstead, Ishida Co. in Sakai, Japan, are currently marketed the best industrial knives currently in production.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest honor among the artisan knife makers in Japan, proved to be exceptional in cutting capacity, penetration and sealing wire is at the level of innovation for materials and construction techniques.
Blade: ZDP-189 in 66.8HRC
Handle material: stainless steel and wood SUS420J2 Ironwood
Blade length: 90 mm.
Blade Thickness: 3 mm.
Overall length: 215 mm.
Weight: 133g.
Lock: Frame Lock with swing SKD11 to 61HRC
Clip: 402J2 steel at 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.10887 -
Rockstead - Chu DLT - knife
Rockstead - Chu DLT - knife
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest honor among the artisan knife makers in Japan, proved to be exceptional in cutting capacity, penetration and sealing wire is at the level of innovation for materials and construction techniques.
Blade: Stainless steel with 64HRC Hitachi YXR7 to cover DLT571 3micron
Handle: in green paracord
Blade length: 120mm.
Blade Thickness: 6mm.
Overall length: 2150mm.
Weight: 284g.
Balancing: 1cm back from the lower branch of the guard
Sheath: Leather
Note: Product is out of printChu002 -
Helle Norway - Dokka 3L - No.200 knife
Intended Use: Hunting
Type of production: industrial
Production Blade: Norway
Blade: rolled steel cheeks with 18/8 stainless steel 59HRC and sharp
Treatment Lama: -
Handle: Birch wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 115
Total length: 200mm.
Thick when closed: 1.8 cm
Weight: 130g.
Closure: back lock
Clip: -
Sheath: Brown leather
Packaging: cylindrical cardboard case more cotton cloth marked Helle
Notes: -HE-200 -
Bark River - North Star A2 - Green Canvas Micarta - 06-137M-GC
Purpose : Hunting / Outdoor / Bushcraft
Type of production : Semi-Industrial
Country of production : USA Blade : A2 steel at 58HRC
blade Treatment : -
Handle : Green Canvas Micarta
blade length : 103mm.
blade thickness : 4mm.
Length closed : -
total length : 212mm.
thickness when closed : -
Balancing : -
Weight : 126g.
Closing : -
Clip : -
Sheath : brown leather, style Loveless
Pack : Cardboard box with logos Bark River
Notes : -10044 -
Bark River - Huntsman A2 Green Canvas Micarta - Coltello
Destinazione d'uso: Caccia/Outdoor/Bushcraft
Tipo di produzione: Semi-Industriale
Produzione Lama: USA
Lama: in acciaio A2 a 58HRC
Trattamento Lama: -
Manicatura: Green Canvas Micarta
Lunghezza lama: 82mm.
Spessore lama: 4.8mm.
Lunghezza chiuso: -
Lunghezza totale: 178mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 100g.
Chiusura: -
Clip: -
Fodero: In pelle marrone, stile Loveless
Confezione: Scatola di cartone con loghi Bark River
Note: -3296 -
Bark River - Northstar Companion A2 Green Canvas Micarta - Coltello
Destinazione d'uso: Caccia/Outdoor/Bushcraft
Tipo di produzione: Semi-Industriale
Produzione Lama: USA
Lama: in acciaio A2 a 58HRC
Trattamento Lama: -
Manicatura: Green Canvas Micarta
Lunghezza lama: 82mm.
Spessore lama: 3.8mm.
Lunghezza chiuso: -
Lunghezza totale: 180mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 114g.
Chiusura: -
Clip: -
Fodero: In pelle marrone, stile Loveless
Confezione: Scatola di cartone con loghi Bark River
Note: -3295 -
Helle Norway - Dovre - No.170 coltello
Destinazione d'uso: caccia
Tipo di produzione: industriale
Lama: in acciaio laminato con guance inox 18/8 e tagliente inox 59HRC
Trattamento Lama: -
Manicatura: Betulla e Corian
Lunghezza lama: 70mm.
Spessore della lama: 3mm.
Lunghezza chiuso: -
Lunghezza totale: 170mm.
Bilanciatura: arretrata a 2.5cm
Peso: 58g.
Chiusura: -
Clip: -
Fodero: cuoio
Note: -HE-170 -
Helle Norway - Fjellkniven knife - No.4 knife
Destination of use: hunting
Type of production: industrial
Blade: iin rolled steel with 18/8 stainless steel cheeks and 59HRC stainless steel cutting edge
Blade treatment: -
Handle: Birch
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: -
Total length: 210mm.
Balancing: set back to 2.5cm
Weight: 108g.
Closure: -
Clip: -
Sheath: leather
Note: -HE-4 -
Helle Norway - Harding - No.99 coltello
Destinazione d'uso: caccia/sportivo
Tipo di produzione: industriale
Produzione Lama: Norvegia
Lama: in acciaio laminato con guance inox 18/8 e tagliente inox 59HRC
Trattamento Lama: -
Manicatura: legno di betulla, palissandro ed anelli di cuoio
Lunghezza lama: 99mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: -
Lunghezza totale: 215mm.
Spessore da chiuso: -
Bilanciatura: arretrata, a 1cm.
Peso: 102g.
Chiusura: -
Clip: -
Fodero: in cuoio marrone
Confezione: astuccio cilindrico di cartone più panno in cotone marchiato Helle
Note: -HE-99 -
Helle Norway - Nying - No.55 coltello
Destinazione d'uso: caccia
Tipo di produzione: industriale
Lama: in acciaio laminato con guance inox 18/8 e tagliente inox 59HRC
Trattamento Lama: -
Manicatura: Betulla
Lunghezza lama: 70mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: -
Lunghezza totale: 165mm.
Bilanciatura: arretrata a 2.5cm
Peso: 82g.
Chiusura: -
Clip: -
Fodero: cuoio
Note: -HE-55 -
Helle Norway - Veidemann - No.53 knife
Intended Use: Hunting
Type of production: industrial
Production Blade: Norway
Blade: rolled steel cheeks with 18/8 stainless steel 59HRC and sharp
Treatment Lama: -
Handle: Birch wood
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: -
Total length: 193mm.
Thick when closed: -
Balance: backward, to 1.5cm.
Weight: 98g.
Closing: -
Clip: -
Sheath: Brown leather
Packaging: cylindrical cardboard case more cotton cloth marked Helle
Notes: -HE-53 -
Helle Norway - Wind knife - No.180 knife
Destination of use: hunting
Type of production: industrial
Blade: in stainless steel with 18/8 stainless steel and 59HRC stainless steel edge
Blade treatment: -
Handle: Birch
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: -
Total length: 220mm.
Balancing: set back to 2.5cm
Weight: 96g.
Closure: -
Clip: -
Sheath: leather
Note: -HE-180 -
Remington - Elite Hunter Series knife I - OWC 19735 knife
Intended use: sports
Type of production: industrial
Blade: full tang in 440C stainless steel
Blade treatment: -
Lama production: Italy
Handle: Aluminum and Olive Wood
Blade length: 103mm.
Blade thickness: 4mm.
Length closed: -
Total length: 223mm.
Balancing: set back - 4cm. from the guard branch
Weight: 234g.
Closing: -
Clip: -
Sheath: Leather
Notes: produced by CCN - Consorzio Coltellerie Maniago4301Special Price €88.53 Regular Price €110.66Out of stock -
Rockstead - Beetle Clad Steel - coltello
Con il marchio Rockstead, della Ishida Co. di Sakai, in Giappone, sono attualmente commercializzati i migliori coltelli industriali attualmente in produzione.
Creati da Katsumi Kitano, che da oltre 20 anni produce coltelli di qualità tanto da esser stato insignito del massimo riconoscimento tra i coltellinai artigiani in Giappone, si dimostrano eccezionali sia in capacità di taglio, penetrazione e tenuta del filo sia a livello di innovazione per i materiali utilizzati e per le tecniche costruttive.
Lama: Acciaio SanMai CLA189 composto da due guance esterne in ATS-34 a 61.9 HRC e da un tagliente in ZDP189 a 67.2 HRC
Manicatura: Same (vera pelle di razza) e alluminio aeronautico con trattamento black alumite a Hv400
Lunghezza lama: 80 mm.
Spessore della lama: 4 mm.
Lunghezza totale: 190 mm.
Peso: 110 g.
Chiusura: Liner Lock in acciaio 402J2 a 46HRC
Clip: in acciaio 402J2 a 45HRC
Note: Accompagnato da certificato di garanzia con specifiche tecniche.4050 -
Rockstead - Chi HPC - knife
Rockstead - About HPC - knife
With the brand Rockstead, Ishida Co. in Sakai, Japan, are currently marketed the best industrial knives currently in production.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest honor among the artisan knife makers in Japan, proved to be exceptional in cutting capacity, penetration and sealing wire is at the level of innovation for materials and construction techniques.
Blade: stainless Hitachi YXR7 to 64.8HRC coverage HPC 3micron - Hv1800
Handle material: Duralumin A2024 with anodized surface to HV400 and skin of Breed
Blade length: 82 mm.
Blade Thickness: 4 mm.
Overall length: 189 mm.
Weight: 100 g.
Lock: Liner Lock 402J2 steel at 52HRC
Clip: 402J2 steel at 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.4067DLC -
Rockstead - Chou HPC - red silk - neck knife
With the Rockstead brand, of Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently being marketed.
Created by Katsumi Kitano, who has been producing quality knives for over 20 years, to the extent that they have been awarded the highest recognition among the artisanal cutlers in Japan, they prove to be exceptional both in cutting, penetration and thread strength and in terms of innovation for the materials used and for construction techniques.
Blade: Hitachi YXR7 65HRC steel with HPC titanium cover
Handle: interweaving in silk tied by hand
Blade length: 45 mm.
Blade thickness: 4 mm.
Total length: 120 mm.
Weight: 60 g.
Sheath: neck, in Kydex
Notes: Accompanied by silk bag and certificate of guarantee with technical specifications.4069RED -
Rockstead - Higo knife in DLC - knife
Blade: Hitachi YXR7 64.8HRC steel with 3micron HPC cover - Hv1800
Handle: Duralumin A2024 with surface anodization at Hv400
Blade length: 90 mm.
Blade thickness: 3.5 mm.
Overall length: 215 mm.
Weight: 100 g.
Closing: Frame Lock with SKD11 to 61HRC
Clip: 402J2 steel to 48HRC
Notes: Accompanied by a certificate of guarantee with technical specifications.4062 -
Rockstead - Higo-JH knife ZDP-189 - knife
Intended use: Collection / Sports
Type of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.4HRC
Blade treatment: mirror polished
Handle: aluminum
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 15.8mm.
Weight: 102g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Serial number # 1039 - Date of production 31 May 20194062ZDP -
Rockstead - Hyuga DLT - coltello
Creati da Katsumi Kitano, che da oltre 20 anni produce coltelli di qualità tanto da esser stato insignito del massimo riconoscimento tra i coltellinai artigiani in Giappone, si dimostrano eccezionali sia in capacità di taglio, penetrazione e tenuta del filo sia a livello di innovazione per i materiali utilizzati e per le tecniche costruttive.
Lama: In acciaio Hitachi YXR7 a 64HRC con copertura DLT571 3micron
Manicatura: in legno ironwood
Lunghezza lama: 95mm.
Spessore della lama: 3,1mm.
Lunghezza totale: 210mm.
Peso: 100g.
Bilanciatura: 1cm arretrato dal ramo di guardia inferiore
Fodero: in cuoio
Note: Accompagnato da certificato di garanzia.4064 -
Rockstead - Jin DLC Leather - coltello
Creati da Katsumi Kitano, che da oltre 20 anni produce coltelli di qualità tanto da esser stato insignito del massimo riconoscimento tra i coltellinai artigiani in Giappone, si dimostrano eccezionali sia in capacità di taglio, penetrazione e tenuta del filo sia a livello di innovazione per i materiali utilizzati e per le tecniche costruttive.
Lama: full tang in acciaio Hitachi YXR7 a 65HRC con copertura HPC 3micron - Hv1800
Manicatura: in legno "iron wood"
Lunghezza lama: 130mm.
Spessore della lama: 6mm.
Lunghezza totale: 250mm.
Peso: 304g.
Bilanciatura: sul ramo di guardia inferiore
Fodero: cuoio
Note: lama asimmetrica, accompagnato da certificati tecnici e di garanzia.4065L -
Rockstead - Kou-S DLC - coltello
Con il marchio Rockstead, della Ishida Co. di Sakai, in Giappone, sono attualmente commercializzati i migliori coltelli industriali attualmente in produzione.
Creati da Katsumi Kitano, che da oltre 20 anni produce coltelli di qualità tanto da esser stato insignito del massimo riconoscimento tra i coltellinai artigiani in Giappone, si dimostrano eccezionali sia in capacità di taglio, penetrazione e tenuta del filo sia a livello di innovazione per i materiali utilizzati e per le tecniche costruttive.
Lama: acciaio Hitachi YXR7 a 64.7HRC con copertura DLC 3micron - Hv1800
Manicatura: Same (vera pelle di razza) e alluminio aeronautico con trattamento black alumite a Hv400
Lunghezza lama: 82 mm.
Spessore della lama: 3.5 mm.
Lunghezza totale: 182 mm.
Peso: 100 g.
Chiusura: Liner Lock in acciaio 402J2 a 52HRC
Clip: in acciaio 402J2 a 52HRC
Note: Modello numerato e accompagnato da certificato di garanzia con specifiche tecniche.4058 -
Rockstead - Kou-S ZDP-189 - coltello
Con il marchio Rockstead, della Ishida Co. di Sakai, in Giappone, sono attualmente commercializzati i migliori coltelli industriali attualmente in produzione.
Creati da Katsumi Kitano, che da oltre 20 anni produce coltelli di qualità tanto da esser stato insignito del massimo riconoscimento tra i coltellinai artigiani in Giappone, si dimostrano eccezionali sia in capacità di taglio, penetrazione e tenuta del filo sia a livello di innovazione per i materiali utilizzati e per le tecniche costruttive.
Lama: Acciaio inox ZDP189 a 67.1 HRC
Manicatura: Same (vera pelle di razza) e alluminio aeronautico con trattamento black alumite a Hv400
Lunghezza lama: 82 mm.
Spessore della lama: 3.5 mm.
Lunghezza totale: 182 mm.
Peso: 100 g.
Chiusura: Liner Lock in acciaio 402J2 a 52HRC
Clip: in acciaio 402J2 a 52HRC
Note: Accompagnato da certificato di garanzia con specifiche tecniche.4057 -
Rockstead - Shin-A Wind Ripple HPC Limited Edition - coltello
Con il marchio Rockstead, della Ishida Co. di Sakai in Giappone, vengono commercializzati i migliori coltelli industriali attualmente reperibili sul mercato.
Punti di forza di questi coltelli sono l'assoluta precisione delle lavorazioni a controllo numerico, l'utilizzo di acciai tecnologicamente avanzati, le elevatissime durezze delle lame che garantiscono incredibili capacità di taglio, penetrazione e tenuta del filo ed i meccanismi di apertura e chisura che sanno garantire la massima sicurezza senza rinunciare al comfort ed alla fluidità d'uso.
Lama: Acciaio al carbonio YXR-7con tagliente a 65.1 HRC e trattamento superficiale HPC
Manicatura: Alluminio aeronautico A6063S con trattamento black alumite a Hv400
Lunghezza lama: 88 mm.
Spessore della lama: 4 mm.
Lunghezza totale: 210 mm.
Peso: 154 g.
Chiusura: Liner Lock in acciaio 402J2 a 50HRC
Clip: in acciaio 402J2 a 50HRC
Note: Esemplare in edizione limitata, realizzato per lo show Arms & Hunting 2011 tenutosi dal 13 al 16 ottobre a Mosca, Russia. Accompagnato da certificato di garanzia con specifiche tecniche.4072