Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Spyderco - Silverax - CPM-S30V & Carbon Fiber - PRIVATE COLLECTION - C228CFP - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: New
* Commercially available: Discontinued
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / CollectionProduction Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S30V
Blade Finish: Satin finish
Handle: Carbon Fiber and G10 Laminate
Blade Length: 88mm.
Blade thickness: 3.5mm.
Length closed: 118mm.
Total length: 203mm.
Weight: 94g.
Closure: Compression Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife, from private collectionC228CFP-CP -
Spyderco - Pattada - N690Co & G10 - PRIVATE COLLECTION - C204GP - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: In very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A couple of small marks above the opening hole, right side blade (see photo)
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / CollectionType of Production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: Satin finish
Handle: Stainless steel and G10
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 121mm.
Total length: 221mm.
Weight: 119g.
Closure: Liner Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife, from private collectionC204GP-CP -
CRKT - M16-12LE knife Small Law Enforcement Tanto - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: small marks on tip
* Marks on handle: clip slightly marked
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryBlade: Teflon-coated AUS-8 high-carbon 57/58HRC stainless steel
Handle: Zytel grips
Blade length: 76 mm.
Blade thickness: 3 mm.
Total length: 185mm.
Weight: 97g.
Closure: Liner Lock
Clip: Stainless Steel
Notes: equipped with safety catchAP-CM16-12LE -
Roselli - small chef knife - R700 - kitchen knife
New blade design and exclusive leather case!
The Roselli Piccolo chef kitchen knife has been further improved with a new blade design, now 2mm thick (previously 3mm). This knife draws inspiration from Japanese tradition and is the perfect choice for all your cooking needs, both outdoors and indoors.
Thanks to its additional weight, this knife is ideal for chopping vegetables, slicing meat and expertly handling smaller bones. It's an indispensable tool for all your culinary adventures.
The blade is forged from high-quality carbon steel and is exceptionally sharp. The handle is made of beautiful curly birch wood and treated with linseed oil to ensure a comfortable and secure grip even when wet.
Now, the Roselli Piccolo Chef kitchen knife comes with an exclusively designed leather case, made of Finnish vegetable tanned leather. This case is both practical and aesthetically pleasing, allowing you to easily transport your beloved knife on all your adventures. Now you can protect your knife in style, wherever you go.
Intended use: Hunting/Sports
Type of production: artisanal
Blade: W75 60/62HRC carbon steel
Blade production: Finland
Handle: Arctic Birch
Blade length: 135mm.
Blade thickness: 2mm.
Total length: 250mm.
Weight: 145g.
Sheath: Light vegetable tanned leather
Notes: Made, sharpened and perfected by hand in Harmoinen, FinlandRO-R700 -
Roselli - Carpenter knife full tang - R110F - artisan knife
Roselli's version of the ultimate outdoor knife is now also available in a full tang model with hidden steel (where the blade runs through the entire handle) to give you better support and balance when you use it intensely. All Roselli full tang knives are long-lasting, sturdy and perfect for heavy-duty use.
The design is inspired by traditional carving knives and, thanks to its handy size, can be adapted anywhere. The knife is also effective as a hunting knife and the size of the blade makes it suitable for hunters who prefer to hunt smaller game.
This new full tang knife features a carbon steel blade and a stabilized birch handle, featuring an eyelet hole for strap attachment. Wood stabilization is the process of strengthening the wood so that it no longer reacts to changes in humidity, which cause the wood to shrink or swell.
Intended use: Hunting/Sports
Type of production: artisanal
Blade: W75 60/62HRC carbon steel
Blade production: Finland
Handle: Arctic Birch
Blade length: 85mm.
Blade thickness: 3mm.
Closed length: -
Total length: 195mm.
Balancing: -
Weight: 145g.
Closure: -
Clips: -
Sheath: light brown leather
Note: -RO-R110F -
Spyderco - Smock - New Pivot 2024 - S30V & Carbon Fiber/G10 - C240CFP - knife
Kevin Smock is an award-winning industrial designer who is making waves with his visionary handcrafted custom knives. Based on his SK23, the Spyderco Smock translates his innovative style into a high-quality production knife.
The Smock's most unique feature, however, is the push-button release of its high-strength Compression Lock mechanism, which allows the knife to close securely and easily without getting your fingers near the edge of the blade. Subtle, innovative and distinctly different, the Smock reflects Kevin Smock's unique approach to knife making.
Intended Use: Sporting/EDC
Type of production: Industrial
Country of manufacture: Taiwan
Blade: stainless steel CPM-S30V
Blade Finish: double satin finish, both horizontal and vertical
Handle: laminated carbon fiber and G10
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed: 11mm.
Weight: 104g.
Closure: Compression Lock
Clip: Stainless steel
Packaging: Cardboard box with Spyderco logos
Notes: front flipper opening system on ball bearings - new 2024 version with revised and increased pivotC240CFP -
Spyderco - Lil' Matriarch - Serrated Black FRN - PRIVATE COLLECTION - C162SBK - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, packaging slightly damaged
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: EDC / RescueProduction Type: Industrial
Country of Production: Japan
Blade: Stainless steel VG-10
Blade Treatment: Satin finish
Handle: FRN
Blade length: 75mm.
Blade thickness: 2mm.
Length closed: 107mm.
Total length: 180mm.
Weight: 70g.
Closure: Back Lock
Clip: stainless steel
Packaging: Cardboard box with Spyderco logos
Notes: -C126SBK-CP -
Spyderco - Endura 4 Stainless Steel Plain Edge - C10P - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
Type: Previously purchased
Condition: in like-new condition
Commercial availability: Available
Sharpening: Factory
Blade marks: -
Handle marks: -
Box: Present
Sheath: -
Manuals, Certificates, and Guarantees: Present
Checked and Certified by our in-house laboratory
Intended Use: SportingProduction Type: Industrial
Blade: VG-10 stainless steel
Blade Treatment: -
Blade Production: Japan
Handle: Stainless Steel
Blade Length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Total Length: 220mm.
Balance: -
Weight: 161g.
Locking Mechanism: Back Lock
Clip: Removable, multiposition, stainless steel
Sheath: -
Notes: -AP-C10P -
Spyderco - Endura 4 - Half Serrated Black Blade - PRIVATE COLLECTION - C10PSBBK - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in good condition.
* Commercially available: Findable
* Sharpening: Factory.
* Marks on blade: Small abrasions on matte black finish.
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: SportingType of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: black titan carbonitriding
Country of manufacture: Japan
Handle: black FRN with embedded stainless steel liners
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 220mm.
Thickness when closed: 15.5mm.
Weight: 106g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Notes: previously purchased knife, from private collectionC10PSBBK-CP -
Spyderco - Native 5 - CPM-S90V & Fluted Carbon Fiber - C41CFFP5 - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S90V Powder Steel
Blade finish: Satin finish
Handle: Fluted Carbon Fiber
Blade Length: 75mm.
Blade thickness: 3.2mm.
Length closed: 102mm.
Total length: 177mm.
Weight: 79g.
Closure: Back Lock
Clip: stainless steel, removable and multi-position
Packaging: cardboard box with Spyderco logos
Notes: -C41CFFP5 -
Spyderco - Domino - CTS-XHP & Cubic Check Carbon Fiber - C172CFTIP - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: Overall in very good condition
* Commercially available Discontinued, remained on the market from 2013 to 2017.
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: A few small abrasion marks on the clip.
* Box: -
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / EDCProduction Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CTS-XHP
Blade finish: Satin finish
Handle: Titanium and Carbon Fiber laminated Cubic Check
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 116mm.
Total length: 195mm.
Weight: 119g.
Closure: Frame Lock R.I.L. (Reeve Integral Lock)
Clip: Multiposition and removable, stainless steel
Notes: Previously purchased knife from a private collection - Design by Eric Glesser - Opening via patented Carson Flipper system - Pivot on ball bearingsSC172CFTIP-CP -
Spyderco - Lil Temperance 3 - K390 Lightweight Knife - C69PBL3K390 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: USA
Blade: K390 steel at 64/65HRC
Blade finish: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon)
Blade Length: 74mm.
Blade thickness: 4mm.
Length closed: 111mm.
Total length: 182mm.
Weight: 108g.
Closure: Compression Lock
Clip: removable and reversible, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: variant in FRN Blue made from Bohler K390 carbon steelC69PBL3K390 -
CRKT - P.S.D. II (Particle. Separation. Device.) by Hammond - AUS-10 & Brown G10 - 7910 - knife
Jim Hammond's original P.S.D. earned its name (Particle. Separation. Device.) for its ability to cut anything, anywhere. The P.S.D. II brings that same capability to a smaller, more portable folding knife, reducing the overall length by more than an inch. The blade is made of corrosion-resistant AUS10 with assisted opening on IKBS ball bearings that ensure quick and easy one-handed operation.
Intended Use: Tactical / EDC
Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-10A
Blade Treatment: Black Oxide
Handle: G10
Blade Length: 76mm.
Blade thickness: 2.8mm.
Length closed: 101mm.
Total length: 178mm.
Weight: 102g.
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Jim Hammond - Assisted opening via Carson Flipper system and IKBS ball bearing movementC7910 -
CRKT - A.B.C. (All. Bases. Covered.) by Hammond - 12C27 & Black G10 - 2606 - knife
Jim Hammond's A.B.C. (All. Bases. Covered.) makes its return in an even more versatile form. It is now a folder, bringing the varied capabilities of the original fixed blade into a more convenient and compact design. With its assisted opening and IKBS pads, it's always ready for action at any time, while the G10 handle provides a strong grip even in adverse weather conditions.
Intended Use: Tactical
Production Type: Industrial
Country of Production: China
Blade: Sandvik 12C27 stainless steel
Blade treatment: Black Oxide
Handle: G10
Blade Length: 85.9mm.
Blade thickness: 3.1mm.
Length closed: 116mm.
Total length: 203mm.
Weight: 110g.
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Jim Hammond - Assisted opening via Carson Flipper system and IKBS ball bearing movementC2606 -
Spyderco - Salt I - H1FRN Yellow Knife - C88SYL - knife
A myth in the knife world is that out there somewhere there is a steel with high cutting capabilities that cannot rust.
A Japanese foundry recently turned this myth into reality with the introduction of a steel called H1. H1 is a PH steel, which is a precipitation-processed, hard-rolled alloy with no heat treatment and 0.1 percent nitrogen that acts like carbon in the steel matrix but does not react with chlorine to create rust.
Surprisingly, it maintains a sharp edge comparable to that of the higher quality knife steels used in the industry by most knife manufacturers.
Intended use: sub/sporting
Type of production: industrial
Country of manufacture: Japan
Blade: nitrogen steel H1
Blade finish: satin-finished
Handle: FRN
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 175mm.
Thickness when closed: 15mm.
Weight: 54g.
Closure: Back Lock
Clip: removable, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -SC88SYL -
Spyderco - Endura 4 Serrated Knife - K390 Blue FRN - C10FPK390 - knife
Intended Use: Sporting
Type of production: industrial
Blade: Bohler K390 carbon steel at 64/65HRC - SERRATED
Blade treatment: satin finish
Country of manufacture: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 96mm.
Blade thickness: 3mm.
Length closed: 127mm.
Total length: 222mm.
Weight: 105g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Packaging: cardboard case with Spyderco logos
Notes: variant in FRN Blue made from Bohler K390 carbon steelC10FSK390 -
CRKT - Pilar Large - Blackwashed Frame Lock Flipper by Vox - 5315KS - folding knife
Intended use: Sporting
Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Blackwashed
Handle: Blackwashed stainless steel
Blade length: 67.8mm.
Blade thickness: 3.8mm.
Length closed: 101.5mm.
Total length: 170mm.
Weight: 119g.
Closure: Frame Lock
Clip: Stainless steel, removable
Packaging: Cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5315KS -
CRKT - Overland Compact Knife by T. J. Schwarz - 6277 - knife
The compact folding knife ready to tackle any terrain.
It may be small, but just like the upgraded 4x4 vehicles that inspired its name, the Overland Compact is exaggeratedly built and ready to tackle the toughest conditions. It takes the design cues and materials of the full-size Overland and puts them into an ultraportable format that practically disappears into a pocket. When it's time to stop the convoy and set up camp, this knife can prepare light food and chop up the perfect marshmallow stick.
Intended Use: Sporty
Production type: Industrial
Country of manufacture: China
Blade: D2 steel
Blade treatment: Blackwashed
Handle: G10 and Blackwashed stainless steel
Blade Length: 57mm.
Blade thickness: 3.2mm.
Length closed: 81mm.
Total length: 137mm.
Weight: 88g.
Closure: FrameLock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by T. J. SchwarzC6277 -
CRKT - Squid Compact by Lucas Burnley - 2485K - knife
This small knife is a big deal. The Squid is known as the perfect knife for everyday use, expertly combining simplicity, usability and performance.
Neither brash nor flashy, it is the humble handyman of the knife world: reliable, solid and extraordinarily capable. Now, renowned designer Lucas Burnley has reworked it into a smaller, nimbler version, the Squid Compact. This reasonably priced folding knife is for everyone.
* Assisted opening: The assisted flipper allows rapid blade opening.
* Smooth opening: The IKBS™ ball bearing system ensures maximum smoothness.
* Easy sharpening: High-carbon stainless steel blade sharpens quickly and easily
* Maximum control: Grooves on the back of the blade to ensure a secure and comfortable grip
* Maximum durability: Stainless steel handle withstands heavy use.
* Low profile: Pocket clip ensures safe carrying
* Accessory options: Hole for lanyard or key ring
Intended Use: EDC
Production type: Industrial
Country of manufacture: China
Blade: Stainless steel 8Cr13MoV
Blade Finish: BlackWashed
Handle: BlackWashed stainless steel
Blade Length: 44mm.
Blade thickness: 2.6mm.
Length closed: 74mm.
Total length: 118mm.
Weight: 79g.
Closure: Frame Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Lucas Burnley - IKBS opening system on pinball-type bearings, spring preload assistedC2485K -
CRKT - Tuna Compact by Lucas Burnley - 2522 - knife
The little fish that rules every pond. Though small, the Tuna Compact evokes the power of one of the world's largest and fastest fish.
It takes the subtle elegance of designer Lucas Burnley's original Tuna and shrinks it into an ultra-compact folding knife. With a profile that suggests strong forward momentum and a blade shape that resembles a deep-sea carnivore, this everyday knife slices through packs and boxes faster than a bluefin tuna slices through waves on a taut line.
* Smooth opening: IKBS™ ball-bearing motion allows for a smooth blade opening.
* Easy sharpening: High-carbon stainless steel blade sharpens quickly and easily.
* Easy opening: The thumb engagement pin allows for quick one-handed opening.
* Exceptional grip: G10 handle provides exceptional grip in all conditions
* Brute force: Fame Lock system uses a thick locking bar to hold the blade in place
* Low profile: Pocket clip ensures safe and secure carrying away from prying eyes
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13MoV
Blade Finish: StoneWashed
Handle: G10 and BlackWashed stainless steel
Blade Length: 69mm.
Blade thickness: 3.6mm.
Length closed: 97mm.
Total length: 163mm.
Weight: 79g.
Closure: Frame Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Lucas Burnley - IKBS ball bearing opening systemC2522 -
CRKT - CEO MicroFlipper Sheepfoot by Rogers - 7083 - knife
The smaller version of the popular CEO folding knife, the Microflipper combines refined style with maximum practicality. It may be small, but it's a serious contender for any job thanks to its lightweight aluminum handle and razor-sharp blade made of Sandvik 12C27™ steel.
This stylish pocket knife is available in two versions: drop-point blade with silver aluminum handle and blue coating, or sheepfoot blade with blue aluminum handle and silver coating.
* Superior performance: Sandvik 12C27™ steel for excellent edge retention.
* Smooth opening: IKBS™ ball-bearing motion allows smooth blade opening.
* Fast opening: Flipper opening system deploys the blade quickly.
* Sturdy and lightweight: Aluminum handle combines strength and minimal weight
* Easy closing: The blade can be easily closed with one hand.
* Carrying options: Adjustable ambidextrous clip for carrying in left or right pocket
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: Sandivk 12C27 stainless steel
Blade Finish: Satin finish
Handle: Aluminum
Blade length: 56mm.
Blade thickness: 2.2mm.
Length closed: 82mm.
Total length: 140mm.
Weight: 48g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - Carson Flipper opening system on IKBS ball bearingsC7083 -
CRKT - CEO MicroFlipper Drop Point by Rogers - 7081 - knife
The smaller version of the popular CEO folding knife, the Microflipper combines refined style with maximum practicality. It may be small, but it's a serious contender for any job thanks to its lightweight aluminum handle and razor-sharp blade made of Sandvik 12C27™ steel.
This stylish pocket knife is available in two versions: drop-point blade with silver aluminum handle and blue coating, or sheepfoot blade with blue aluminum handle and silver coating.
* Superior performance: Sandvik 12C27™ steel for excellent edge retention.
* Smooth opening: IKBS™ ball-bearing motion allows smooth blade opening.
* Fast opening: Flipper opening system deploys the blade quickly.
* Sturdy and lightweight: Aluminum handle combines strength and minimal weight
* Easy closing: The blade can be easily closed with one hand.
* Carrying options: Adjustable ambidextrous clip for carrying in left or right pocket
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: Sandivk 12C27 stainless steel
Blade Finish: Satin finish
Handle: Aluminum
Blade length: 60mm.
Blade thickness: 2.2mm.
Length closed: 82mm.
Total length: 143mm.
Weight: 48g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - Carson Flipper opening system on IKBS ball bearingsC7081 -
Roselli - Hunting Nalle knife - UHC steel - RW200A - handcrafted knife
This handmade Finnish hunting and outdoor knife is an exclusive version of the classic "Hunting" model and has a unique reindeer horn shape and decoration.
It was originally developed as a knife for moose hunters in Finland and quickly became the perfect companion for working larger game such as moose, wild boar and deer. The design and profile of the blade are excellent for skinning game.
The blade is made of UHC (Ultra High Carbon) steel and the handle decorated with reindeer antlers is curly birch, stained and coated with linseed oil, which ensures a firm grip, even when wet. UHC steel makes the knife extremely sharp for a long time.
Comes with a handcrafted sheath of dark vegetable tanned Finnish leather in combination with stained curly birch, for a unique look. Made, sharpened in collaboration with knife maker Kari Ohtonen.
Intended use: Hunting/Sports/Collection
Type of production: artisanal
Blade: in UHC 62/63HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 105mm.
Blade thickness: 3mm.
Closed length: -
Total length: 235mm.
Balancing: -
Weight: 130g.
Closure: -
Clips: -
Sheath: Vegetable tanned leather with reindeer antlers
Note: -RO-RW200A -
Roselli - Heimo 4” Bushcraft edition full tang - R42 - handcrafted knife
This new Finnish outdoor and hunting knife called Heimo 4" Bushcraft edition, full tang, is designed to take on all your wilderness adventures and challenges. Very popular for bushcraft, hunting, fishing and the outdoors open.Roselli has chosen to make this blade with carbon steel for a longer life of the edge.
This model has a full tang, therefore more balanced and robust than the standard version. In fact, Roselli full tang knives are resistant, durable and perfect for heavy use.
The knife has a beautiful curly stained birch handle coated with linseed oil to ensure a firm grip, even when wet. The handle also has brass clamps and strap holes.
It comes in a handmade sheath of dark vegetable tanned Finnish leather, with a metal spring to keep the knife firmly in place at all times. You can choose between two scabbard options; scabbard combined with Firesteel Roselli or a standard scabbard.
Intended use: Hunting/Sports
Type of production: artisanal
Blade: W75 60HRC carbon steel
Lama production: Finland
Handle: Birch
Blade length: 95mm.
Blade thickness: 3mm.
Closed length: -
Total length: 220mm.
Balancing: -
Weight: 200g.
Closure: -
Clips: -
Sheath: in worked and hand-stitched leather
Note: -RO-R42 -
Roselli - Fulltang hunting knife - R100F - handcrafted knife
The "first" Roselli, with a minimalist design dating back to 1976. For over 45 years it has been used in wild nature and tackles hunting, fishing and life in the open air with ease. This version of Hunting is the full tang version, more balanced and robust. Roselli full tang knives are resistant, durable and perfect for heavy use.
This handmade Finnish hunting knife was originally developed as a knife for moose hunters in Finland and quickly became the perfect companion for handling larger game such as moose, wild boar and larger deer. The design and profile of the blade make it excellent for skinning game.
This new version features a full tang carbon steel blade and a curly birch handle, coated with linseed oil, which brings a firm grip, even when wet. Comes with a handcrafted sheath of vegetable tanned Finnish leather.
Intended use: Hunting/Sports
Type of production: artisanal
Blade: W75 60HRC carbon steel
Lama production: Finland
Handle: Birch
Blade length: 95mm.
Blade thickness: 3mm.
Closed length: -
Total length: 220mm.
Balancing: -
Weight: 200g.
Closure: -
Clips: -
Sheath: in worked and hand-stitched leather
Note: -RO-R100F -
Roselli - Hunting and Grandmother knives - pair - R180 - handcrafted knife
When one isn't enough..., this Double Sheath Set, is the two knife configuration that allows you to easily carry both the "Hunting Knife" and the "GrandMother" knife.
Both blades of the two knives are made of forged carbon steel and the handles are made of curly birch, coated with linseed oil, which ensure a firm grip, even when wet. Comes with a handcrafted double sheath of light vegetable tanned Finnish leather, tailored to fit both knives
Roselli - Hunting Knife - R100 - Artisan Knife
Intended use: Hunting/Sports
Type of production: artisanal
Blade: W75 60HRC carbon steel
Lama production: Finland
Handle: Birch
Blade length: 105mm.
Blade thickness: 3mm.
Closed length: -
Total length: 227mm.
Balancing: -
Weight: 120g.
Closure: -
Clips: -
Sheath: in worked and hand-stitched leather
Note: -Roselli - Grandmother Knife - R130 - Artisan Knife
Intended use: Hunting/Sports
Type of production: artisanal
Blade: W75 60/62HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 55mm.
Blade thickness: 3mm.
Closed length: -
Total length: 150mm.
Balancing: -
Weight: 52g.
Closure: -
Clips: -
Sheath: brown leather
Note: -RO-R180 -
Roselli - Leuku small knife - R151 - handcrafted knife
With a lower weight and smaller size than its big brother Big Leuku - the small Leuku is a versatile outdoor tool with properties slightly more similar to those of a bushcraft knife. The little Leuku is an all-round knife, capable of handling everything you can tackle in a woodland environment: cutting, separating bones, carving and many other tasks within the outdoors and wilderness survival.
The blade is made of forged carbon steel, and the handle is curly birch, coated with linseed oil, which ensures a firm grip, even when wet. Comes with a handcrafted sheath of vegetable tanned Finnish leather.
Intended use: Hunting/Sports
Type of production: artisanal
Blade: W75 60HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 140mm.
Blade thickness: 5mm.
Closed length: -
Total length: 265mm.
Balancing: -
Weight: 240g.
Closure: -
Clips: -
Sheath: in worked and hand-stitched leather
Note: -RO-R151 -
Roselli - Allround Small Finland Ax - red elm - R860D - Ax Accept
This handmade outdoor ax from Finnish Roselli is handy in size with a short handle made of beautiful slippery elm, which you can easily take with you anywhere in nature.
Roselli axes always deliver on their promises and are considered by many to be the perfect companion and tool when you go out into the wilderness. Roselli's axes are sturdy, have extreme sharpness and can easily be used for felling, pruning and logging. They are also a great tool for splitting and tensioning wood, as the wide angle of the axes blade prevents them from binding while splitting.
It comes with a simple dark vegetable tanned Finnish leather case to protect the line and a handy loop that allows it to be carried on a belt or attached to a backpack. The handle is made from birch and coated with linseed oil to ensure a firm grip, even when wet.
Type of production: Artisanal
Lama production: Finland
Blade: 60HRC hardened carbon steel
Blade finish: brut de forge
Handle: birch wood
Blade length: 90mm.
Total length: 350mm.
Weight: 720g.
Sheath: in worked and hand-stitched leatherRO-R860D -
CRKT - Clever Girl Kukri Knife - 2710 - Machete
Intended Use: Hiking / Heavy Duty
Production Type: industrial
Blade: Full Tang in carbon steel SK-5 with Black Powder treatment
Country of Production: Taiwan
Handle: G-10
Blade Length: 196mm.
Blade thickness: 4.8mm.
Total length: 336mm.
Balance: Advanced
Weight: 402g.
Sheath: thermoplastic
Packaging: cardboard box with CRKT logos
Notes: Design by Austin McGlaunCR2710 -
CRKT - Folts Minimalist Drop Point Black - 2384K - Knife
Intended Use: Neck Knife
Production type: Industrial
Country of Production: China
Blade: Stainless steel 5Cr15MoV 55/57HRC
Blade Finish: Blacwashed
Handle: G-10
Blade Length: 55mm.
Blade thickness: 2.6mm.
Total length: 133mm.
Weight: 49g.
Scabbard: Polypropylene
Package: Cardboard box with CRKT logos.
Notes: Design dy Alan FoltsCR2384K -
Spyderco - Manbug Wharncliffe Black TiCN - SCMBKWPBK - knife
Intended Use: Sporting/EDC
Production Type: Industrial
Blade production: Japan
Blade: Stainless steel VG-10
Blade Treatment: Black TiCN - Titanium Carbonitride
Handle: FRN
Blade Length: 49mm.
Blade thickness: 2.5mm.
Length closed: 64mm.
Total lenght: 113mm.
Thickness when closed: 8mm.
Weight: 19g.
Closure: Back Lock
Clip: -
Package: cardboard case with Spyderco logos
Notes: -SMWBK -
CRKT - Carson M16-13DSFG Tan Special Forces - PRIVATE COLLECTION - pocket knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A couple of small marks on Tan-colored finish, unnoticeable
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting/TacticalProduction Type: Industrial
Country of Production: China
Blade: Stainless steel AUS-8
Blade Finish: Tan Oxide
Handle: PVD steel folders with G10 Tan grips
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 140mm.
Total length: 240mm.
Weight: 150g.
Opening: Carson Flipper system
Closure: Liner Lock with auto LAWKS security system
Clip: multi-position, removable, Black Oxide stainless steel
Packaging: cardboard box with CRKT logos
Notes: Design by Kit Carson - Carson Flipper opening systemM16-13DSFG-CP -
Spyderco - Para 3 - CPM-S45VN and G10 Digital Camo - C223GPCMO - knife
Intended Use: Sporting / Tactical
Production Type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S45VN
Blade Treatment: Stonewashed
Handle: G-10
Blade Length: 75mm.
Blade thickness: 3.7mm.
Length closed: 109mm.
Total length: 184mm.
Weight: 96g.
Closure: Compression Lock
Clip: Stainless steel
Package: cardboard box with Spyderco logos
Notes: new 2021 version with CPM-S45VN steel and Stonewashed finishC223GPCMO-S45 -
CRKT - Techliner Super Shorty - TPENBOND2 - tactical pen
The Techliner™ Super Shorty pen is built to impress with a sleek, ergonomic body and magnetic ends that attach securely to whiteboards, desk legs and workbenches so it's always within reach.
Secure cap: Magnetic ends secure the cap and attach to surfaces
Strong and lightweight: Aluminum handle combines strength with minimal weight
Visually appealing: Blue anodized body
Compact size: Easy to carry
Write anywhere: Ink cartridge developed for extreme environmental conditionsMaterial: 6061 anodized aluminum with stainless steel clip
Rear base: Magnetic
Ink: Black with pressurized Schmidt Refill
Total length: 105mm.
Diameter: 11.7mm.
Weight: 19.8gTPENBOND2 -
Spyderco - Endela - Plain Black - C243PBK - Knife
Intended use: Sporting
Type of production: industrial
Blade: Stainless steel VG-10
Blade finish: satin finish
Country of manufacture: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 87mm.
Blade thickness: 3mm.
Length closed: 119mm.
Total length: 206mm.
Thickness when closed: 15.5mm.
Weight: 88g.
Closure: Back Lock
Clip: Removable, multi-position stainless steel clip
Notes: -C243PBK -
Spyderco - Police - Half Serrated - C07PS - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Japan
Blade: Stainless steel VG-10
Blade Treatment: Satin finish
Handle: Satin-finished stainless steel
Blade length: 104mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 240mm.
Thickness when closed: 8mm
Weight: 162g.
Closure: Back Lock
Clip: multi-position, removable, stainless steel
Package: cardboard box with Spyderco logos
Notes: -C07PS -
Spyderco - Para 3 CPM-SPY27 Lightweight - C223PCBL - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Usa
Blade: Stainless steel CPM-SPY27
Blade treatment: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon)
Blade Length: 75mm.
Blade thickness: 3.8mm.
Length closed: 109mm.
Total length: 184mm.
Weight: 68g.
Closure: Compression Lock
Clip: removable and reversible, flush stainless steel clip
Package: cardboard box with Spyderco logos
Notes: Special edition stainless steel CPM-SPY27, developed by Spyderco together with Crucible and used exclusively on Spyderco products - Spyderco's main aim was to improve the VG-10 steel by increasing its composition and enriching it with nitrogen, niobium, vanadium and additional carbon by using a powder steel instead of a traditional martensitic one.C223PCBL -
CRKT - Freya by Elmer Roush - 2749 - Viking Axe
Intended Use: Sporting / Hiking
Production type: Industrial
Country of Production: Taiwan
Blade: Carbon steel 1055
Blade treatment: manganese phosphate
Handle: Walnut wood
Blade length: 88mm.
Blade thickness: 32mm.
Total length: 483mm.
Weight: 870g.
Scabbard: -
Notes: Design by Elmer RoushCR2749 -
CRKT - Berserker by RMJ Tactical - 2736 - Viking Axe
Intended Use: Sporting / Hiking
Production type: Industrial
Country of Production: Taiwan
Blade: Carbon steel 1055
Blade treatment: manganese phosphate
Handle: Walnut wood
Blade length: 118mm.
Blade thickness: 40mm.
Total length: 483mm.
Weight: 940g.
Scabbard: -
Notes: Design by by Ryan Johnson of RMJ TacticalCR2736 -
CRKT - Compano Carabiner by Bond - 9082 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: Stainless steel 5Cr15Mov
Blade finishing: Satin finish
Handle: 2Cr13 stainless steel with blackwash and bronze finish
Blade length: 37mm.
Blade thickness: 3.6mm.
Length closed: 82mm.
Total length: 117mm.
Weight: 62g.
Closure: Slipjoint
Clip: -
Package: Cardboard box with CRKT logos
Notes: Design by Mike Bond - Snap hook for attachment - Bottle openerCR9082 -
CRKT - Folts Minimalist Cleaver Blackout - 2383K - Knife
Intended Use: Neck Knife
Production type: Industrial
Country of Production: China
Blade: Stainless steel 5Cr15MoV 55/57HRC
Blade Finish: Blacwashed
Handle: G-10
Blade Length: 54mm.
Blade thickness: 2.6mm.
Total length: 129mm.
Weight: 48g.
Scabbard: Polypropylene
Package: Cardboard box with CRKT logos.
Notes: Design dy Alan FoltsCR2383K -
CRKT - Pilar III by Vox - 5317 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin finish
Handle: G10 and stainless steel with aluminum spacer
Blade length: 75mm.
Blade thickness: 3.8mm.
Length closed: 108mm.
Total length: 182mm.
Weight: 102g.
Closure: FrameLock
Clip: Stainless steel, removable
Packaging: Cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5317 -
CRKT - Carson M16-03BK - Bronze & Black Oxide - knife
Intended Use: Sporting / Tactical
Production Type: Industrial
Country of Production: China
Blade: Stainless steel 12C27 Sandvik
Blade treatment: Black Oxide
Handle: Stainless steel 2CR13 with nitriding in Bronze
Blade Length: 90mm.
Blade thickness: 3mm.
Length closed: 118mm.
Total length: 209mm.
Weight: 108g.
Opening: Carson Flipper system
Closure: Frame Lock
Clip: Multi-position, removable, in Black Oxide stainless steel
Package: Cardboard box with CRKT logos
Notes: Design by Kit Carson - Carson Flipper opening systemCM16-03BK -
CRKT - CEO Bamboo by Rogers - 7096YGK - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Blackwashed
Handle: Nylon reinforced with fiberglass
Blade length: 79mm.
Blade thickness: 2.2mm.
Length closed: 113mm.
Total length: 194mm.
Weight: 59g.
Closing: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - IKBS ball bearing opening system - Winner of the 2019 Blade Show as "Best Buy Of The Year"C7096YGK -
Spyderco - Emphasis - C245GP - folding knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade finish: Satin finish
Handle: Stainless steel and G-10
Blade length: 91mm.
Blade thickness: 3mm.
Length closed: 122mm.
Total length: 211mm.
Weight: 147g.
Closing system: Liner Lock
Clip: Removable and multi-position, in stainless steel
Packaging: cardboard box with Spyderco logos
Note: -C245GP -
Spyderco - Insistent - C246GP - folding knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade finish: Satin finish
Handle: Stainless steel and G-10
Blade length: 63mm.
Blade thickness: 3mm.
Length closed: 94mm.
Total length: 155mm.
Weight: 113g.
Closing system: Liner Lock
Clip: Removable and multi-position, in stainless steel
Packaging: cardboard box with Spyderco logos
Note: -C246GP -
CRKT - Tuna Knife by Burnley - 2520 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr14Mov 58/60 HRC stainless steel
Blade treatment: Blackwashed
Handle: G10 and Blackwashed stainless steel
Blade length: 82mm.
Blade thickness: 3.7mm.
Length closed: 114mm.
Total length: 195mm.
Weight: 105g.
Closing: FrameLock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Lucas BurnleyC2520 -
CRKT - Piet by Vox - 5390 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Satin finish
Handle: Nylon reinforced with fiberglass with anodized titanium spacer
Blade length: 68mm.
Blade thickness: 3.3mm.
Length closed: 95mm.
Total length: 164mm.
Weight: 71g.
Closing: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5390 -
Spyderco - Dragonfly 2 Wave - Emerson Opener - C28GYW2 - knife
Intended use: sports
Type of production: Industrial
Country of production: Japan
Blade: VG-10 stainless steel
Blade treatment: Satin finish
Handle: FRN with stainless steel drowned folders
Blade length: 57mm.
Blade thickness: 2.5mm.
Closed length: 84mm.
Total length: 141mm.
Weight: 37g.
Opening: via Emerson Wave system or through the "SpyderHole" blade recess
Closure: Back Lock
Clip: stainless steel, removable and reversible
Sheath: -
Packaging: Cardboard box with Spyderco logos
Note: -C28GYW2 -
CRKT - Pilar Large by Vox - 5315G - folding knife
Destination of use: Sports
Type of production: Industrial
Country of production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin
Handle: Stainless Steel
Blade length: 67mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 170mm.
Weight: 98g.
Closure: Frame Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5315G -
Spyderco - Shaman - Black PVD Plain Edge - C229GBK - knife
Intended use: Sports
Type of production: Industrial
Country of production: Usa
Blade: Stainless steel CPM-S30V Powder Steel
Blade treatment: Black PVD
Handle: G10 with 3D machining and stainless steel liners
Blade length: 91mm.
Blade thickness: 3.8mm.
Length closed: 119mm.
Total length: 210mm.
Weight: 147g.
Closure: Compression Lock
Clip: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: Model inspired by the Native, with a size of about 20%C229GBK -
Spyderco - Alcyone - C222GPGY - knife
Purpose of use: Sport
Type of production: Industrial
Country of production: China
Blade: stainless steel CTS-BD1
Blade Treatment: Satin
Handle: Stainless Steel and G-10
Blade Length: 74mm.
Blade thickness: 3mm.
Closed length: 105mm.
Overall length: 179mm.
Closed thickness: 16mm.
Weight: 93g.
Closure: Liner Lock
Clip: Removable and reversible, stainless steel
Packing: cardboard box with Spyderco logos
Notes: -C222GPGY -
Spyderco - Delica - Wharncliffe Plain - C11FWCBK - knife
Intended use: Sports
Type of production: Industrial
Production Country: Japan
Blade: VG-10 58HRC stainless steel
Blade treatment: satin finish
Handle: FRN liners with embedded stainless steel
Blade length: 75mm.
Blade Thickness: 2.5mm.
Closed Length: 107mm.
Overall length: 180mm.
Weight: 68g.
Lock: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Sharpening Flat GroundC11FWCBK -
CRKT - Hi Jinx Z by Ken Onion - K281KXP - PRIVATE COLLECTION - Pocket Knife
KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: like new
* Commercially available: discontinued
* Sharpening: factory sharpened
* Marks on the blade: None
* Marks on the handle: None
* Box: Present
* Scabbard: /
* Manuals, certificates and warranties: Available
* Tested and certified by our in-house laboratory.Intended Use: Sporting
Production Type: Industrial
Country of manufacture: China
Blade: Stainless steel 1.4116
Blade finish: Satin surface
Handle: GFN nylon
Blade length: 84 mm.
Blade thickness: 2.3 mm.
Length closed: 120 mm.
Total length: 203 mm.
Weight: 139 g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Packaging: Cardboard box with CRKT logo
Notes: Ball bearing opening with IKBS system - Opening via Carson pinball system - Design by Ken OnionCK281KXP -
CRKT - Pilar by Vox - 5311 - folding knife
Intended use: Sports / EDC
Type of production: Industrial
Production Country: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin finish
Handle: Stainless Steel
Blade length: 61mm.
Blade thickness: 3.5mm.
Closed Length: 90mm.
Overall length: 151mm.
Weight: 119g.
Lock: Frame Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5311 -
Spyderco - Efficient - C216G - knife
Intended use: Sports
Type of production: Industrial
Production Country: China
Blade: 8Cr13MoV Stainless Steel
Blade treatment: Satin finish
Handle: Stainless steel and G-10
Blade length: 76mm.
Blade thickness: 3mm.
Closed Length: 104mm.
Overall length: 180mm.
Thick when closed: 16mm.
Balancing: -
Weight: 116g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -C216G -
Spyderco - Delica Flat Ground - Zome Green - C11ZFPGR - knife
Intended use: Sports
Type of production: Industrial
Production Country: Japan
Blade: VG-10 58HRC stainless steel
Blade treatment: satin finish
Handle: FRN liners with embedded stainless steel
Blade length: 75mm.
Blade Thickness: 2.5mm.
Closed Length: 107mm.
Overall length: 180mm.
Weight: 66g.
Lock: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Sharpening Flat Ground12638 -
Spyderco - Endura Flat Ground - Zome Green - C10ZFPGR - Knife
Intended use: Sports
Type of production: Industrial
Blade: Stainless Steel VG-10
Blade treatment: satin
Production Country: Japan
Handle: FRN liners with embedded stainless steel
Blade length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Overall length: 220mm.
Thick when closed: 15.5mm.
Weight: 94g.
Lock: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Full-Flat GrindC10ZFPGR -
Spyderco - Ronin 2 by Michael Janich - FB09G2 - knife
Intended use: Tactical / EDC
Type of production: Industrial
Production Country: Taiwan
Blade: Full Tang, Stainless Steel CTS-BD1
Blade treatment: Satin finish
Handle: G10
Blade length: 104mm.
Blade thickness: 3mm.
Overall length: 199mm.
Weight: 111g.
Sheath: Boltaron (plastic) with coupling of G-Clip type
Clip: multi, stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Michael Janich12536 -
CRKT - Ken Onion Hootenanny - K300KXP - knife
Intended use: Sports
Type of production: Industrial
Production Lama: China
Blade: Stainless steel 8Cr13MoV
Treatment Lama: Satin
Handle: Stainless steel 2Cr13 and grips FRN
Blade length: 85mm.
Blade thickness: 3.5mm.
Length closed: 116mm.
Overall length: 201mm.
Thick when closed: -
Balancing: -
Weight: 136g.
Closure: Frame Lock Stainless Steel 2Cr13
Clip: removable, stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT, Design Ken Onion, opening system with ball bearing type IKBS opening type Carson FlipperCK300KXP -
CRKT - Burnley Squid - 2490 - knife
Intended use: Sports
Type of production: Industrial
Production Lama: China
Blade: Stainless steel 8Cr13MoV
Treatment Blade: Stonewashed
Handle: Stainless Steel 2Cr13
Blade length: 54mm.
Blade thickness: 3mm.
Closed Length: 55mm.
Overall length: 114mm.
Thick when closed: 14mm.
Balancing: -
Weight: 96g.
Closure: Frame Lock Stainless Steel 2Cr13
Clip: removable, stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT, Design Lucas BurnleyC2490 -
CRKT - Carson M16-12ZLEK Law Enforcement Zytel Folding Tanto - knife
Blade: Stainless steel AUS-8 high-carbon 57 / 58HRC Teflon
Handle: Zytel Grips
Blade length: 76 mm.
Blade thickness: 3 mm.
Overall length: 185 mm.
Weight: 102 g.
Lock: Liner Lock
Clip: Stainless Steel
Notes: equipped with safety locks and AutoLAWKS guard Carson Flipper tagliacinture with integrated rear window breakerCM16-12ZLEK -
Spyderco - Delica Flat Ground - Orange - C11FPOR - knife
Intended use: Sporting
Type of manufacture: Industrial
Blade: Stainless steel VG-10 58HRC
Blade treatment: -
Blade production: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 180mm.
Balance: -
Weight: 66g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: Full-Flat GrindC11FPOR -
Spyderco - Cat SC129GP - knife
Spyderco - Cat SC129GP - knife
Intended Use: Sport / EDC
Type of production: Industrial
Production Lama: Taiwan
Blade: stainless steel 440C
Treatment Lama: -
Handle: G10
Blade length: 60mm.
Blade thickness: 2.5mm.
Closed Length: 90mm.
Overall length: 150mm.
Thick when closed: 9mm.
Balancing: -
Weight: 72g.
Lock: Liner Lock
Clip: yes
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -SC129GP -
Spyderco - Dragonfly Stainless Steel - SC28P - knife
Intended Use: EDC / Sports
Type of production: Industrial
Blade Production: Japan
Blade: stainless steel VG-10
Blade treatment: -
Handle: Stainless steel
Blade length: 58mm.
Blade thickness: 2mm.
Closed Length: 80mm.
Overall length: 140mm.
Thick when closed: -
Balancing: -
Weight: 74g.
Closure: Back Lock
Clip: stainless steel, removable
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: -SC28P -
Spyderco - Manbug Lightweight - MBK - knife
Intended Use: Sport / EDC
Type of production: Industrial
Blade Production: Japan
Blade: Stainless steel VG-10
Treatment Blade: -
Handle: FRN
Blade length: 49mm.
Blade thickness: 2.5mm.
Closed Length: 64mm.
Overall length: 113mm.
Thickness when folded: 8mm.
Balancing: -
Weight: 19g.
Closure: Back Lock
Clip: -
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -MBKP -
Spyderco - Resilience - C142GP - knife
Intended use: Sport
Type of production: Industrial
Production Lama: China
Blade: 8Cr13MoV stainless steel
Treatment Blade: -
Handle: Stainless steel and G-10
Blade length: 108mm.
Blade thickness: 3mm.
Closed Length: 133mm.
Overall length: 238mm.
Thick when closed: 16mm.
Balancing: -
Weight: 154g.
Lock: Liner Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -C142GP -
CRKT - Chanceinhell by Ken Onion - K910KKP - Machete
Destinazione d'uso: Escursionismo/Heavy Duty
Tipo di Produzione: industriale
Lama: in acciaio al carbonio 65Mn a 54/56 HRC con trattamento Black Powder
Produzione Lama Cina
Manicatura: Polimeri TPR e Nylon
Lunghezza lama: 304mm.
Spessore della lama: 2.5mm.
Lunghezza totale: 450mm.
Bilanciatura: avanzata
Peso: 490g.
Chiusura: -
Clip: -
Fodero: in Nylon
Confezione: scatola di cartone con loghi CRKT
Note: Design by Ken OnionCK910KKP -
Roselli - Allround Small Finland Ax - R860 - Ax Hatchet
This is Roselli's handmade outdoor ax in a practical size with a short handle, which you can easily carry with you on your hikes in nature.
Roselli's axes always deliver on their promises and are considered by many to be the perfect companion and tool when you go out into the wilderness. Roselli's axes are robust, extremely sharp and can be used for felling, pruning and making firewood. They are also excellent tools for splitting and tensioning wood, as the broad blade of the axes protects them from snagging while cutting.
It comes with a simple case in vegetable tanned Finnish leather to protect the edge and a practical loop that allows it to be carried on a belt or attached to a backpack. The handle is made from birch and coated with linseed oil to ensure a firm grip, even when wet.
Type of production: Artisanal
Lama production: Finland
Blade: 60HRC hardened carbon steel
Blade finish: brut de forge
Handle: birch wood
Blade length: 90mm.
Total length: 350mm.
Weight: 720g.
Sheath: in worked and hand-stitched leatherRO-R860 -
Spyderco - Cat - Satin 440C & Schwarz G10 - SC129GP - PRIVATSAMMLUNG - Messer
MESSER AUS PRIVATER SAMMLUNG ENTNOMMEN
* Typ: Zuvor gekauft
* Zustand: Gebraucht, in gutem Zustand
* Kommerziell verfügbar: Erhältlich, aber mit verschiedenen Stählen
* Schärfung: Werkseitig geschärft
* Marks on blade: Keine
* Marks on handle: Some small signs of wear on G10
* Box: Vorhanden, aber leicht beschädigt
* Scheide: /
* Handbücher, Zertifikate und Garantien: /
* Geprüft und zertifiziert durch unser hauseigenes Labor
Verwendungszweck: Sporting/EDCProduktionsart: Industriell
Land der Herstellung: Taiwan
Klinge: 440C rostfreier Stahl
Klingenfinish: Satinierte Oberfläche
Griff: G10
Klingenlänge: 60mm.
Dicke der Klinge: 2,5 mm.
Länge geschlossen: 90mm.
Gesamtlänge: 150mm.
Dicke im geschlossenen Zustand: 9mm.
Gewicht: 72g.
Verschluss: Liner Lock
Clip: Abnehmbar und umkehrbar aus Edelstahl
Verpackung: Pappschachtel mit Spyderco-LogosSC129GP-CP -
CRKT - M16-04Z by Kit Carson - knife
Intended use: Sport
Type of production: Industrial
Production Blade: Taiwan
Blade: AUS-8 stainless steel
Treatment Lama: -
Handle: Zytel
Blade length: 94mm.
Blade thickness: 3.5mm.
Closed Length: 134mm.
Total length: 230mm.
Thick when closed: 17mm.
Balance: -
Weight: 182g.
Lock: Liner Lock locking system with self-LAWKS
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos CRKT
Notes: -CM16-04Z