Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

With Rockstead brand of Ishida Co. Sakai, Japan, they are currently marketed with the best industrial knives currently in production.

Created by Katsumi Kitano, who for 20 years has been producing quality knives so much to have been awarded the highest award among the knife craftsmen in Japan, you demonstrate exceptional both in cutting capacity, penetration and tightness of the wire both in terms of innovation for and materials used for the construction techniques.

Blade: ZDP189 rolled stainless steel at 66.6 HRC inside and VG10 at 60.8 HRC outside
Handle: Same (real ray skin) and aircraft aluminum with black alumite treatment to HV400
Blade length: 95 mm.
Blade thickness: 4 mm.
Overall length: 210 mm.
Weight: 145 g.
Lock: Liner Lock steel in 52HRC 402J2
Clip: Steel 402J2 to 52HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.

With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and hold of the thread and in innovation for the materials used and for construction techniques.

Intended use: Collection / Sports

Type of production: Midtech
Country of production: Sakai - Japan
Blade: in Hitachi YXR7 steel at 64HRC
Blade treatment: Black DLC mirror
Handle: A7075 Duralumin with Hv400 hardness anodizing
Blade length: 70mm.
Blade thickness: 3.3mm.
Length closed: 104mm.
Total length: 176mm.
Thick when closed: 11.4mm.
Weight: 74g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel of 1mm. with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: -

Blade: stainless steel ZDP-189 to 67.2HRC
Handle: Duralumin A2024 with anodized surface to HV400
Blade length: 73 mm.
Blade Thickness: 3.5 mm.
Overall length: 176 mm.
Weight: 172 g.
Lock: Frame Lock with a swing in SKD11 61HRC
Clip: Steel 402J2 to 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.

Magnum continues the tradition of its annual knives and presents the Collection 2023, a collector's knife with exceptional appeal. Passionate knife collectors around the world will once again be faced with the choice of whether the knife should find a place in the display case or on the belt. Lucas Burnley, considered one of the world's most renowned knife designers and who has already launched several successful knife series for Boker and Boker Plus, was won over for this special project. The knife maker from the U.S. state of Oregon knows how to combine clear lines and tactical influences in his designs like no other.

The Magnum Collection 2023 is an impressive full tang outdoor knife with a massive D2 blade that features a pronounced ricasso and an unusual two-tone finish. The designer alternates between a horizontal and vertical finish on the blade, which underscores the special appeal of the fixed-blade knife. Attention to detail also continues in the contoured handle with black polished Micarta grips that gives excellent user ergonomics for effortless work. Features include a high-quality leather sheath with two snap fasteners, an exclusive collector's box, and a certificate of authenticity. The Magnum Collection 2023 is strictly limited to 1999 pieces worldwide.

Intended Use: Collection/Utility

Production type: Industrial
Country of manufacture: Taiwan
Blade: full tang in D2 steel
Blade finish: dual tone
Handle: Micarta
Blade length: 174mm.
Blade thickness: 4.8mm.
Total length: 305mm.
Weight: 353g.
Sheath: black leather
Package: gift box with warranty certificate and microfiber cleaning cloth
Notes: Numbered and limited edition made in only 1999 pieces - Design by Lucas Burnley

KNIFE TAKEN FROM PRIVATE COLLECTION

* Type: Previously Purchased
* Condition: very good, mirror polished blade with a few slight surface marks (visible against the light) from being inserted in the sheath - a few dots of oxidation on brass guard and pommel
* Commercially available Out of production
* Sharpening: Original edge
* Marks on blade: yes, light and superficial
* Marks on handle: no
* Box: no
* Scabbard: Present - Original, in good condition
* Manuals, Certificates and Warranties: no
* Checked and certified by our in-house laboratory

Intended Use: Utility/Hunting

Production type: Industrial
Country of manufacture: Germany - Solingen
Blade: Stainless steel 440C
Blade finish: Mirror polished
Handle: Briar
Blade length: 123mm. (edge 112mm.)
Blade thickness: 4.4mm.
Total length: 230mm.
Weight: 162g.
Sheath: leather
Packaging: -
Notes: -

RETIRED KNIFE FROM A PRIVATE COLLECTION - 2009 edition limited to 1999 pieces
* Type: Previously purchased
* Conditions: In like new condition
* Available on the market: no longer in production, difficult to find
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box: original, rigid case with Boker Magnum Collection 2009 logos
* Sheath: leather sheath
* Manuals, Certificates and Warranties: original
* Checked and certified by our internal laboratory

Intended use: Sports / Collection

Type of production: Industrial
Production Lama: Taiwan
Blade: 440C stainless steel
Blade treatment: Satin
Handle: Micarta
Blade length: 185mm.
Blade thickness: 6.5mm.
Total length: 315mm.
Weight: 515g.
Sheath: Black leather
Packaging: Rigid case with Boker Magnum Collection 2009 logos
Notes: Limited and serialized edition of only 1999 pieces worldwide

COLTELLO RITIRATO DA COLLEZIONE PRIVATA - Edizione del 2010 limitata a 1999 pezzi
* Tipologia: Precedentemente Acquistato
* Condizioni: In condizioni pari al nuovo
* Reperibile in commercio in commercio: non più in produzione, di difficile reperibilità
* Affilatura: Originale
* Segni su lama: no
* Segni su impugnatura: no
* Scatola: originale, cofanetto rigido con loghi Boker Magnum Collection 2010
* Fodero: fodero in cuoio
* Manuali, Certificati e Garanzie: originali
* Controllato e Certificato dal nostro laboratorio interno

Destinazione d'uso: Sportivo/Collezione

Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: in acciaio inox 440C
Trattamento Lama: Satinata
Manicatura: White Micarta
Lunghezza lama: 180mm.
Spessore lama: 6,5mm.
Lunghezza totale: 320mm.
Peso: 435g.
Fodero: Cuoio nero
Confezione: Cofanetto rigido con loghi Boker Magnum Collection 2010
Note: Edizione limitata e serializzata di soli 1999 pezzi in tutto il mondo

The various models of the Magnum Collection have been adorning the windows of countless knife enthusiasts for many years. This year's collector's knife was designed by Brian Efros of Colorado and combines well thought out construction with high quality materials and perfect workmanship. The full-time cutler has been designing and manufacturing his own knives since 2008 and is now known far beyond the country's borders. Full order booklets, perfect workmanship and individual implementation ensure that his hand-made pieces reach the best prices internationally.

The Magnum Collection 2022 is an outdoor knife with an extremely robust drop point blade in satin D2. The screwable titanium handguard and the pronounced indentation of the fingers prevent involuntary blade slipping and thus safety at work. The OD green grip scales of the full tang construction are made of textured micarta and are held in place by decorative titanium screws. The combination of ergonomic design and pleasing shape also offers an exceptionally fuller grip feel. This unique collector's knife is strictly limited to 1999 pieces worldwide. Comes with a high quality leather sheath in an exclusive collector's box and with a certificate of authenticity.

Intended use: Collection / Utility

Type of production: Industrial
Country of production: Taiwan
Blade: full tang in D2 steel
Blade finish: satin finish
Handle: Micarta
Blade length: 120mm.
Blade thickness: 4mm.
Total length: 237mm.
Weight: 191 g.
Sheath: in black leather
Packaging: gift box with guarantee certificate and microfiber cleaning cloth
Notes: Limited and numbered edition of 1999 copies

Intended Use: Collection / Utility

Production type: Industrial
Country of Production: Taiwan
Blade: ful tang in D2 steel
Blade finish: Satin finish
Handle: Micarta
Blade length: 134mm.
Blade thickness: 5mm.
Total length: 252mm.
Weight: 233g.
Sheath: Black leather
Package: gift box with certificate of guarantee and microfiber cleaning cloth.
Notes: Limited and numbered edition of 1999 pieces - Design by Jesper Voxnaes (Vox)

Vintage knife produced in the 90s. Excellent for quality level and for materials used, suitable for hunting and collection use

Intended use: hunting / collection

Type of production: industrial
Country of production: Germany
Blade: 440C stainless steel
Blade treatment: -
Handle: nickel silver and deer
Blade length: 75mm.
Blade thickness: 2.5mm.
Closed length: 110m.
Total length: 190mm.
Weight: 162g.
Closing: -
Clip: -
Note: -

Vintage knife produced in the 90s. Excellent in terms of quality and materials used, suitable for sports use and collection

Intended use: hunting / collection

Type of production: industrial
Country of production: Germany
Blade: 440C stainless steel
Blade treatment: -
Handle: nickel silver and deer
Blade length: 80mm.
Blade thickness: 2.5mm.
Closed length: 108m.
Total length: 185mm.
Weight: 52g.
Closing: -
Clip: -
Note: -

Vintage knife produced in the 90s. Excellent for quality level and for materials used, suitable for hunting and outdoor use and collection

Intended use: hunting / collection

Type of production: industrial
Country of production: Germany
Blade: 440C stainless steel
Blade treatment: -
Handle: brass and deer
Blade length: 80mm.
Blade thickness: 3mm.
Closed length: 118m.
Total length: 200mm.
Weight: 189g.
Closure: back lock
Clip: -
Note: -

Intended use: Collection / Utility

Type of production: Industrial
Country of production: Taiwan
Blade: in steel D2
Blade finish: sandblasted
Handle: G10
Blade length: 173mm.
Blade thickness: 5mm.
Total length: 324mm.
Weight: 459g.
Sheath: in black leather
Packaging: gift box with warranty certificate and microfiber cleaning cloth
Notes: Limited and numbered edition of 1999 copies - Design by Dietmar Pohl (Pohl Force)

With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.

Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and tightness of the thread and in innovation for the materials used and for construction techniques.

Intended use: Collection / Sports

Type of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.5HRC
Blade treatment: mirror polished
Handle: titanium
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 12.2mm.
Weight: 136g.
Opening: through ambidextrous pin
Washers: in brass
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Serial number # 096 - Date of production 05 July 2019

Intended use: Collection / Sports

Type of production: Industrial
Country of production: Taiwan
Blade: 440C steel
Blade treatment: mirror polishing
Handle: in micarta, with stainless steel guard
Blade length: 220mm.
Blade thickness: 4.6mm.
Total length: 350mm.
Weight: 408g.
Sheath: in black leather
Packaging: gift box with warranty certificate and microfibre cloth for cleaning
Notes: Limited edition of 1999 numbered copies

This knife blade is convex on both sides in the tradition of the highly praised Japanese sword. This shape is both sharp and strong, and can still slice cleanly through a sheet of paper even after the punishment of chopping and cutting through dried bamboo. Using this special blade shape is an excellent way of allowing an edge to be thick without sacrificing any of its sharpness. This knife is of preeminent sharpness. This is a durable knife with strong cutting capabilities that will last for a long time. Even when used for rigorous cutting, the blade will not bite or catch thanks to its convex shape. Other knives will often bite or catch, and may acquire nicks if pulled out suddenly.

Blade: XR-7 steel at 64.3 HRC with DLC treatment
Handle: Same (real breed leather) and aeronautical aluminum with Hv400 black alumite treatment
Blade length: 95 mm.
Blade thickness: 4 mm.
Total length: 210 mm.
Weight: 145 g.
Closing: Liner Lock in 402J2 steel at 52HRC
Clip: in 402J2 steel at 52HRC
Notes: Accompanied by a warranty certificate with technical specifications.

Intended use: collection / sports

Type of production: Mid Tech (semi-artisan)
Blade: Satin CPM-S35VN stainless steel
Handle: in anodised titanium with carbon fiber inserts and titanium spacers
Blade length: 90mm.
Blade thickness: 3.8mm.
Length closed: 125mm.
Total length: 215mm.
Handle thickness: 13.5mm.
Weight: 126g.
Opening: carson flipper system on movement with ceramic ball bearings IKBS by Flavio Ikoma
Closure: Titanium frame lock
Clip: in titanium, machined from solid, removable, with ceramic retention ball
Packaging: cardboard box with Todd Begg Steelcraft Series logos - warranty and authenticity QR Code with knife serial number
Note: -

Intended use: collection / sports

Type of production: Mid Tech (semi-artisan)
Blade: Satin CPM-S35VN stainless steel
Handle: in anodised titanium with carbon fiber inserts and titanium spacers
Blade length: 90mm.
Blade thickness: 3.8mm.
Length closed: 125mm.
Total length: 215mm.
Handle thickness: 13.5mm.
Weight: 126g.
Opening: carson flipper system on movement with ceramic ball bearings IKBS by Flavio Ikoma
Closure: Titanium frame lock
Clip: in titanium, machined from solid, removable, with ceramic retention ball
Packaging: cardboard box with Todd Begg Steelcraft Series logos - warranty and authenticity QR Code with knife serial number
Note: -

Intended use: collection / sports

Type of production: Mid Tech (semi-artisan)
Country of production: USA
Blade: CPM-S35VN stainless steel with dual tone finish
Handle: in G10 with carbon fiber inserts; liners and spacers in anodized titanium
Blade length: 95mm.
Blade thickness: 3.8mm.
Length closed: 127mm.
Total length: 229mm.
Handle thickness: 16mm.
Weight: 155g.
Opening: carson flipper system on movement with ceramic ball bearings IKBS by Flavio Ikoma
Closure: Liner Lock in anodized titanium
Clip: in anodized titanium, machined from solid, removable, with ceramic retention ball
Packaging: cardboard box with Todd Begg Steelcraft Series logos - warranty and authenticity QR Code with knife serial number
Note: -

Intended use: collection / sports

Type of production: Mid Tech (semi-artisan)
Country of production: USA
Blade: CPM-S35VN stainless steel with dual tone finish
Handle: in G10 with carbon fiber inserts; liners and spacers in anodized titanium
Blade length: 95mm.
Blade thickness: 3.8mm.
Length closed: 127mm.
Total length: 229mm.
Handle thickness: 16mm.
Weight: 155g.
Opening: carson flipper system on movement with ceramic ball bearings IKBS by Flavio Ikoma
Closure: Liner Lock in anodized titanium
Clip: in anodized titanium, machined from solid, removable, with ceramic retention ball
Packaging: cardboard box with Todd Begg Steelcraft Series logos - warranty and authenticity QR Code with knife serial number
Note: -

Intended use: collection / sports

Type of production: Mid Tech (semi-artisan)
Country of production: USA
Blade: CPM-S35VN stainless steel with dual tone finish
Handle: in G10 with carbon fiber inserts; titanium liners and spacers
Blade length: 95mm.
Blade thickness: 3.8mm.
Length closed: 127mm.
Total length: 229mm.
Handle thickness: 16mm.
Weight: 155g.
Opening: carson flipper system on movement with ceramic ball bearings IKBS by Flavio Ikoma
Closure: Titanium Liner Lock
Clip: in titanium, machined from solid, removable, with ceramic retention ball
Packaging: cardboard box with Todd Begg Steelcraft Series logos - warranty and authenticity QR Code with knife serial number
Note: -

Intended use: collection / sports

Type of production: Mid Tech (semi-artisan)
Country of production: USA
Blade: Satin CPM-S35VN stainless steel
Handle: in anodised titanium with carbon fiber inserts and titanium spacers
Blade length: 76mm.
Blade thickness: 3.8mm.
Closed length: 108mm.
Total length: 184mm.
Handle thickness: 14mm.
Weight: 105g.
Opening: carson flipper system on movement with ceramic ball bearings IKBS by Flavio Ikoma
Closure: Titanium frame lock
Clip: in titanium, machined from solid, removable, with ceramic retention ball
Packaging: cardboard box with Todd Begg Steelcraft Series logos - warranty and authenticity QR Code with knife serial number
Note: -

Intended use: collection / sports

Type of production: Mid Tech (semi-artisan)
Country of production: USA
Blade: CPM-S35VN stainless steel with dual tone finish
Handle: in G10 with carbon fiber inserts; titanium liners and spacers
Blade length: 76mm.
Blade thickness: 3.8mm.
Closed length: 108mm.
Total length: 184mm.
Handle thickness: 14mm.
Weight: 105g.
Opening: carson flipper system on movement with ceramic ball bearings IKBS by Flavio Ikoma
Closure: Titanium Liner Lock
Clip: in titanium, machined from solid, removable, with ceramic retention ball
Packaging: cardboard box with Todd Begg Steelcraft Series logos - warranty and authenticity QR Code with knife serial number
Note: -

Intended use: collection / sport

Type of production: Industrial
Country of production: Taiwan
Blade: 440C steel
Blade treatment: satin finish
Handle: in micarta, with stainless steel guard
Blade length: 178mm.
Blade thickness: 4.6mm.
Total length: 305mm.
Weight: 295g.
Sheath: in black leather
Packaging: gift box with warranty certificate and microfiber cleaning cloth
Notes: Numbered and limited edition of 1999 copies - Design by John H. Davis

Purpose: Collection / Sportsman

Type of production: Industrial
Country of Origin: Taiwan
Blade: 440C steel
Blade treatment: satin finish
Handle: rayskin and cotton
Blade Length: 235mm.
Blade thickness: 6.5mm.
Total Length: 375mm.
Weight: 527g.
Sheath: in leather
Packing: gift box with guarantee certificate and microfibre cloth for cleaning
Notes: Limited edition number edition in 1999 - Design by Wally Hayes

This knife can still slice paper even after the punishment of striking and cutting dried bamboo.This knife has a beautiful convex surface with extreme sharpness.This is a flagship of the ROCKSTEAD folding knife collection. Both sides of the blade are convex. The blade is in the shape of the traditional Japanese sword. It cuts well and is strong. You can enjoy its strong cutting capabilities for a long time.

Full length: 213.00 mm
Blade length: 93.00 mm
Weight: 155 g
Thickness: 3.70 mm
Material: YXR7
Hardness: HRC65
Blade geometry: Honzukuri
Hard coating: DLC
Knives type: Folder

Intended Use: Collection / Sports
Industrial production
Production Country: Taiwan
Blade: 440C
Blade treatment: satin two-tones
Handle: walnut wood with mosaic pin
Blade length: 227mm.
Blade thickness: 6.5mm.
Overall length: 362mm.
Weight: 472G.
Sheath: Leather
Packaging: gift box with warranty card and microfiber cloth for cleaning
Notes: Edition in numbered and limited edition - Design by Anders Högström

Rockstead - SAI Titanium ZDP-189 - knife

Blade: ZDP-189 in 66.8HRC
Handle material: titanium
Blade length: 80 mm.
Blade Thickness: 3.7 mm.
Overall length: 190 mm.
Weight: 140g.
Closure: liner lock
Sheath: Black leather
Notes: Accompanied by a certificate of guarantee with the technical specifications.

Rockstead - Higo-X-IW - Ironwood ZDP-189 - knife

With the brand Rockstead, Ishida Co. in Sakai, Japan, are currently marketed the best industrial knives currently in production.

Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest honor among the artisan knife makers in Japan, proved to be exceptional in cutting capacity, penetration and sealing wire is at the level of innovation for materials and construction techniques.

Blade: ZDP-189 in 66.8HRC
Handle material: stainless steel and wood SUS420J2 Ironwood
Blade length: 90 mm.
Blade Thickness: 3 mm.
Overall length: 215 mm.
Weight: 133g.
Lock: Frame Lock with swing SKD11 to 61HRC
Clip: 402J2 steel at 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.

Rockstead - Chu DLT - knife

Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest honor among the artisan knife makers in Japan, proved to be exceptional in cutting capacity, penetration and sealing wire is at the level of innovation for materials and construction techniques.

Blade: Stainless steel with 64HRC Hitachi YXR7 to cover DLT571 3micron
Handle: in green paracord
Blade length: 120mm.
Blade Thickness: 6mm.
Overall length: 2150mm.
Weight: 284g.
Balancing: 1cm back from the lower branch of the guard
Sheath: Leather
Note: Product is out of print

Rockstead - About HPC - knife

With the brand Rockstead, Ishida Co. in Sakai, Japan, are currently marketed the best industrial knives currently in production.

Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest honor among the artisan knife makers in Japan, proved to be exceptional in cutting capacity, penetration and sealing wire is at the level of innovation for materials and construction techniques.

Blade: stainless Hitachi YXR7 to 64.8HRC coverage HPC 3micron - Hv1800
Handle material: Duralumin A2024 with anodized surface to HV400 and skin of Breed
Blade length: 82 mm.
Blade Thickness: 4 mm.
Overall length: 189 mm.
Weight: 100 g.
Lock: Liner Lock 402J2 steel at 52HRC
Clip: 402J2 steel at 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.

Blade: Hitachi YXR7 64.8HRC steel with 3micron HPC cover - Hv1800
Handle: Duralumin A2024 with surface anodization at Hv400
Blade length: 90 mm.
Blade thickness: 3.5 mm.
Overall length: 215 mm.
Weight: 100 g.
Closing: Frame Lock with SKD11 to 61HRC
Clip: 402J2 steel to 48HRC
Notes: Accompanied by a certificate of guarantee with technical specifications.

Intended use: Collection / Sports

Type of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.4HRC
Blade treatment: mirror polished
Handle: aluminum
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 15.8mm.
Weight: 102g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Serial number # 1039 - Date of production 31 May 2019