Sport, Military and Collectible Knives | Coltelleria Collini
-
Museum Replicas Windlass - Sgian Dubh 400910 Scottish knife - knife collection
The Sgian Dubh is a ceremonial dagger knife (in sgian Gaelic) worn as part of the modern Scottish Highland dress, along with the kilt.
It is worn tucked into socks, with only the knob visible.Intended use: sports / collection
Type of production: artisanal
Country of production: India
Blade: 1055 carbon steel
Blade treatment: -
Handle: in engraved wood with fittings
Blade length: 82mm.
Blade thickness: 2.5mm.
Total length: 170mm.
Weight: 46g.
Sheath: in wood and leather
Packaging: -
Note: -400910 -
Steel Will - Piercer Ti by T. Rumici - Satin D2 & Titanium / Black G10 - PRIVATE COLLECTION - F40-61 - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased and used.
* Condition: Overall in very good condition, a few small oxidation marks on the blade and slight discoloration of the G10
* Commercially available: Discontinued
* Sharpening: Factory.
* Marks on blade: minor cosmetic oxidation marks that do not affect its use
* Marks on handle: slight discoloration of the G10 cheek piece.
* Box: Present
* Scabbard: -* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratoryIntended Use: Tactical / EDC
Production Type: Industrial
Country of Production: China
Blade: D2 tool steel
Blade treatment: Satin finish
Handle: made of G10, titanium frame and spacer
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 114mm.
Total length: 195mm.
Thickness when closed: 12mm.
Weight: 110g.
Opening: through slot cut in the blade
Washers: brass
Closure: liner lock
Clip: stainless steel, deep pocket type, removable and reversible
Packaging: cardboard box with Steel Will Knives logos.
Notes: previously purchased knife from a private collection - Design by Tommaso RumiciSW-F40-61-CP€0.00Only 0 leftOnly 0 leftOut of stock -
Museum Replicas Windlass - Bonny Highland Scottish Dirk 400806 - craft dagger
The Scottish dirk (also called highland dirk, in Scottish Gaelic, biodag) is a traditional and ceremonial side dagger of Scottish Highland regiment officials and possibly derived from the sixteenth century ballock.
The traditional Scottish dirk spread particularly in the second half of the seventeenth century, when it was used among the military during the Jacobite insurrection.
Production: artisan
Blade: carbon steel
Handle: wood
Knob: steel
Guard: steel
Sheath: leather and steel
Blade length: 29cm.
Total Length: 42.5cm.
Blade width: 35mm.
Blade thickness: 4mm.
Weight: 328g.
Balancing: -400806 -
Museum Replicass Windlass - Primitive Bowie Knife - 400884 - knife
Intended use: sports / collection / hunting
Type of production: Semi-Industrial
Lama production: India
Blade: 1065 carbon steel
Handle: brown wood
Blade length: 300mm.
Blade thickness: 4.5mm.
Total length: 465mm.
Balancing: 5 cm advanced
Weight: 542g.
Sheath: in brown leather
Packaging: cardboard box400884 -
Steel Will - Piercer Knife Frame by Tommaso Rumici - D2 Satin - F40-61 - knife
Intended use: Tactical / EDC
Type of production: Industrial
Country of production: China
Blade: in steel tool D2
Blade treatment: Satin finish
Handle: in G10, frame and spacer in titanium
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 114mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 110g.
Opening: through a slot cut on the blade
Washers: brass
Closure: liner lock
Clip: stainless steel, deep pocket type, removable and reversible
Packaging: Cardboard box with Steel Will Knives logos
Notes: Design by Tommaso RumiciSW-F40-61€106.56Only 0 leftOnly 0 leftOut of stock -
Steel Will - Piercer Knife Liner by Tommaso Rumici - D2 Blackwash - F40-09 - Knife
Intended use: Tactical / EDC
Type of production: Industrial
Country of production: China
Blade: in steel tool D2
Blade treatment: Blackwashed
Handle: in G10, internal stainless steel liners, titanium spacer
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 114mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 98g.
Opening: through a slot cut on the blade
Washers: brass
Closure: liner lock
Clip: stainless steel, deep pocket type, removable and reversible
Packaging: Cardboard box with Steel Will Knives logos
Notes: Design by Tommaso RumiciSW-F40-09€65.57Out of stock -
Browning - Buck Mark caccia - coltello
Destinazione d'uso: caccia/sportivo
Lama: full-tang in acciaio inox 440C teflonato
Tipo di filo convessoProduzione Lama Italia
Manicatura: legno
Lunghezza lama: 95mm.
Spessore della lama: 3mm.
Lunghezza chiuso: -
Lunghezza totale: 225mm.
Bilanciatura: arretrata
Peso: 210g.
Chiusura: -
Clip: -
Fodero: in nylon
Note: -2441€90.16Out of stock -
Browning - Silhouette caccia - coltello
Destinazione d'uso: caccia/sportivo
Lama: full-tang in acciaio inox 440C teflonato
Produzione Lama Italia
Manicatura: legno
Lunghezza lama: 95mm.
Spessore della lama: 3mm.
Lunghezza chiuso: -
Lunghezza totale: 225mm.
Bilanciatura: arretrata
Peso: 200g.
Chiusura: -
Clip: -
Fodero: in nylon
Note: -2442€90.16Only 0 leftOnly 0 leftOut of stock













