Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Brusletto - Vassfaret F/150 - Signature Edition - 19932 - knife
Intended use: Hunting / sports / collection
Type of production: semi-industrial
Production Blade: Norway
Blade: 440C stainless steel
Treatment Blade: mirror polishing
Handle: Micarta
Blade length: 90mm.
Blade Thickness: 3.5mm.
Length closed: -
Overall length: 210mm.
Balancing: back
Weight: 238g.
Sheath: Black leather
Note: version with blade autographed by Ken Where Nyhus, CEO of Brusletto & Co. AS10970€143.44Only 2 left -
Citadel - Fidel Buffalo Slipjoint Knife - 207CR - handmade knife
Intended use: collectible/sporting
Type of production: Handcrafted
Blade Production: Cambodia
Blade: DNH7 carbon steel selective hardening 40/60HRC
Blade Finish: mirror polished
Handle: water buffalo horn
Blade length: about 80mm.
Blade thickness: about 3mm.
Length closed: about 113m.
Total length: about 190mm.
Thickness when closed: about 17mm.
Balance: -
Weight: about 58g.
Closure: -
Clip: -
Sheath: leather pouch
Packaging: -
Notes: each knife is handmade and differs minimally in size, weights and aestheticsCI-207CR -
Chris Reeve - Large Sebenza - Classic 2000 Micarta + Leather Sheath - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition, with a few small marks due to time.
* Commercially available Discontinued
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: Small marks due to being placed in the scabbard and the passage of time.
* Box: Present and complete
* Scabbard: Present (not included at the time, but sold separately), original, brown leather, well maintained
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratoryIntended Use: Collection/Sportsman
Type of production: Handcrafted
Country of Production: USA
Blade: CPM-S30V 58/59HRC stainless steel
Handle: micro-bead-blasted titanium with Black Canvas Micarta inserts
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 207mm.
Thickness when closed: 17mm.
Weight: 125g.
Closure: Frame Lock
Clip: removable, in micropallinated titanium
Packaging: December 2006 "Sebenza Classic MM" version - Previously purchased, from private collection - Full set, complete with white cardboard box with Chris Reeve logos and warranty certificates, original leather sheath with Chris Reeve logosCR-LSCMMM-CP -
Chris Reeve - Small Sebenza 31 Plain Tanto - MagnaCut & Titanium Natural Micarta Inlays - knife
The idea behind the Sebenza has never wavered: to create the best pocket knife in the world.
First-rate materials, fine finishes, and a security locking system, all in an incredibly lightweight and precision tool. This commitment continues with the new Sebenza 31 with ceramic ball interface.
Like the first Sebenza, it offers the same warm "click" and heirloom quality produced to aerospace tolerances. The Sebenza 31 adds finer details to an already fine knife, taking another steady and reliable step forward.
Intended Use: Collector/SportsmanType of manufacture: MidTech
Country of manufacture: USA
Blade: CPM MagnaCut steel at 63/64HRC
Blade finish: Stonewashed
Handle: Titanium 6AL4V microblasted with micarta inserts
Blade length: 76.2mm.
Blade thickness: 3mm.
Length closed: 101mm.
Total length: 177.3mm.
Weight: 85g.
Closure: Frame Lock
Clip: Titanium 6AL4V microblasted
Package: Cardboard box with Chris Reeve logos, Fluorinated grease, Threadlocker, Disassembly tool, Microfiber cloth, Manuals and Warranty Certificate
Notes: -CR-S31-1230 -
Chris Reeve - Large Sebenza 31 Plain Tanto - MagnaCut & Titanium - knife
The idea behind the Sebenza has never wavered: to create the best pocket knife in the world.
First-rate materials, fine finishes and a security locking system, all in an incredibly lightweight and precision tool. This commitment continues with the new Sebenza 31 with ceramic ball interface.
Like the first Sebenza, it offers the same warm "click" and heirloom quality produced to aerospace tolerances. The Sebenza 31 adds finer details to an already fine knife, taking another steady and reliable step forward.
Intended Use: Collector/SportsmanType of manufacture: MidTech
Country of manufacture: USA
Blade: CPM MagnaCut steel at 63/64HRC
Blade finish: Stonewashed
Handle: Titanium 6AL4V microblasted
Blade length: 91.7mm.
Blade thickness: 3mm.
Length closed: 122mm.
Total length: 213.5mm.
Weight: 133g.
Closure: Frame Lock
Clip: Titanium 6AL4V microblasted
Package: Cardboard box with Chris Reeve logos, Fluorinated grease, Threadlocker, Disassembly tool, Microfiber cloth, Manuals and Warranty Certificate
Notes: -CR-L31-1010 -
Chris Reeve - Inyoni Drop Point - MagnaCut & Natural Canvas Micarta - knife
In the tradition of Chris Reeve Knives, the Inyoni bird and fish hunting knife takes its name from the Zulu word for "bird." Light as a feather, weighing 68 grams, the latest version of the Inyoni offers all the functionality of its predecessor, without the weight.
Its full-tang drop point blade makes it the ideal knife for processing birds and fish, while providing ample edge for many stages of processing larger game, as well as a long list of other cutting tasks outside the hunting field. The thin Kydex sheath fits perfectly over the handles of the Inyoni.
Intended use: sports/hunting
Type of Manufacture: MidTech
Country of Manufacture: USA
Blade: full tang in CPM MagnaCut 63/64HRC steel
Blade finish: stonewashed
Handle: Micarta
Blade length: 96mm.
Blade thickness: 3.2mm.
Total length: 202mm.
Weight: 68g.
Sheath: Slim Fit in thermoformed Kydex.
Packaging: cardboard box with Chris Reeve logos, paracord lanyard, maintenance key, certificates and warrantiesCR-INY-1001 -
Chris Reeve - Sable III Integral Knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new, never used
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Absent
* Scabbard: Present, original, like new
* Manuals, Certificates and Warranties: No
* Checked and Certified by our in-house laboratoryIntended Use: Collecting/Hunting/Sporting
Production type: Midtech
Country of Production: USA
Blade: A2 55/57HRC steel
Blade Treatment: gunkote
Handle: A2 55/57HRC steel with alluminium screwed cap
Blade length: 108mm.
Blade thickness: 4mm.
Total length: 205mm.
Weight: 203g.
Sheath: Black leather
Packaging: -
Notes: knife withdrawn from private collection like new, lacks packaging and certificatesCR-SA3-CP -
Citadel - Lancha Rayskin White knife - handmade knife
Intended use: sports / collection
Type of production: Artisan
Production Lama: Cambodia
Blade: in DNH7 carbon steel with 40 / 60HRC selective hardening
Blade treatment: -
Handle: stingray leather
Blade length: 90mm.
Blade thickness: 4mm.
Closed length: 120mm.
Total length: 210mm.
Thick when closed: 25mm.
Balancing: -
Weight: 188g.
Closure: liner lock
Clip: -
Sheath: cordura bag
Packaging: -
Note: -AP-CIT-LRW -
Citadel - Rossignoli Folder Big - friction folding knife - craft knife
Intended use: sports / collection
Type of production: Artisan
Production Lama: Cambodia
Blade: in DNH7 carbon steel with 40 / 60HRC selective hardening
Blade treatment: -
Handle: Water Buffalo Horn
Blade length: 95mm.
Blade thickness: 4mm.
Closed length: 137mm.
Total length: 205mm.
Thick when closed: 23mm.
Balancing: -
Weight: 146 g.
Closure: folding with friction
Clip: -
Sheath: Cordura bag
Packaging: -
Note: -CD4211 -
Chris Reeve - Large Sebenza 21 Plain knife - Insingo - PRIVATE COLLECTION - knife
Knife withdrawn from a private collection, Chris Reeve model out of production and no longer available on the market. In excellent condition, complete with original box, certificates, stickers, cleaning cloth, fluorinated grease and maintenance key - Checked and certified by our in-house Coltelleria Collini laboratory.
Intended use: collection / sports
Type of production: Semi-Artisan
Production Lama: USA
Blade: CPM-S35VN 58 / 59HRC stainless steel
Handle: Titanium with micarta inserts
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 210mm.
Thick when closed: 17mm.
Weight: 134g.
Closure: Frame Lock
Clip: removable, in titanium
Packaging: white cardboard box with Chris Reeve logos and warranty certificatesL21-1008-CP -
Chris Reeve - Inyoni knife - Cocobolo - PRIVATE COLLECTION - collection knife
Rare knife produced by Chris Reeve in 2007 and no longer in production since 2013. Knife from a private collection in like new condition, with original sheath, without original box and certificate. Checked and certified by our internal laboratory.
Intended use: sports / huntingBlade: CPM-S30V 58 / 59HRC stainless steel
Blade treatment: stonewash finish
Handle: Cocobolo wood
Blade length: 88mm.
Blade thickness: 3.5mm.
Closed Length: -
Total length: 201mm.
Balancing: set back
Weight: 76g.
Closure: -
Clip: -
Sheath: in leather
Notes: inyoni in Zulu means birdAP-INY-CR -
Chris Reeve - Green Beret 5.5 "knife - Dark Earth by W. Harsey - knife
Intended use: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: CPM-S35VN stainless steel at 55 / 57HRC
Surface treatment: Dark Earth PVD
Handle: Black Canvas Micarta
Blade length: 140mm.
Blade thickness: 5.58mm.
Total length: 276mm.
Balancing: on the lower guard branch
Weight: 335g.
Sheath: Nylon thigh, M.O.L.L.E.compatible
Notes: New 2018 version - Guarantee and authenticity certificates - Design by William W. HarseyGBS-1002 -
Citadel - Nordic hunter knife - 288 - craft knife
Citadel - Nordic
These handmade knives are distinguished by their original but functional line, which is well matched to the traditional manufacturing techniques and the materials used.
The blades are in fact carbon-hardened to a hardness of around 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire tempered at 60 HRC to have excellent cutting capacity, penetration and flexibility. The knife is then polished and sharpened by hand on stone and finished in every single detail.Blade: DNH7 "Bruit de forge" selective hardening 40/60 HRC steel with file-worked spine
handle: In wood with brass guard
Blade length: 70 mm.
Handle length: 115 mm.
Blade thickness: 3.5 mm.
Total length: 195 mm.
Sheath: Handmade brown leather
Weight: 154 g.CI-NORDIC -
Citadel - Japanese Aikuchi - Special Salamander - craft knife
aikuchi
processing
The blades are carbon-hardened to a hardness of about 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire is tempered at 60 HRC to have excellent cutting capacity, penetration and flexibility. The blade is then polished and sharpened by hand on stone and the knife is finished in every single detail.Type of production: Artisan
Country of production: Cambodia
Steel: carbon DNH7, hand forged, with hardened clay tempered at 60 / 40HRC
Habaki: copper
Tsuka: samekawa (breed skin)
Saya: Lacquered wood and water buffalo horn
Blade length: 170mm. (including habaki)
Total length: 275mm.
Weight: 210g. without sayaNote: Since these are handmade items and differ slightly in finishes from one another, the knife you ordered may not be identical to the one shown in the images.
CI-AI-SAL -
Chris Reeve - Large Inkosi - Insingo Blade - knife
Intended Use: Collection / Sports
Blade: CPM-S35VN stainless steel 58/59 HRC
Country of Origin: USA
Finish: stonewashed
Handle: Titanium
Blade length: 92mm.
Blade Thickness: 3.56mm.
Closed Length: 123mm.
Overall length: 212mm.
Weight: 140g.
Lock: Frame Lock
Clip: Titanium
Packaging: cardboard box with CRK logos, microfiber cloth, guarantee certificates
Notes: -LIN-1022 -
Chris Reeve - Small Inkosi - Insingo Blade - knife
Intended use: Sports / Collection
Type of production: Semi-Artisan
Country of production: USA
Blade: CPM-S35VN 58 / 59HRC stainless steel
Blade treatment: stonewashed
Handle: titanium 6Al4V
Blade length: 70mm.
Blade thickness: 3.5mm.
Length closed: 95mm.
Total length: 165mm.
Thick when closed: 17mm.
Weight: 78g.
Closure: Frame Lock
Clip: titanium, removable
Packaging: cardboard box with Chris Reeve logos, warranty certificates, microfibre cloth, maintenance kit
Note: -SIN-1022 -
Chris Reeve - Green Beret 7" knife by W. Harsey - 2017 Version - knife
Purpose: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Black PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyGB7-1000 -
Chris Reeve - Green Beret 7" knife Dark Earth by W. Harsey - 2017 Version - knife
Purpose: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Dark Earth PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyGB7-1002 -
Chris Reeve - Umnumzaan Clip Plain - folding knife
Purpose: Sportsman / Collectibles
Type of production: Semi-craftsmanship
Blade Production: USA
Blade: Stainless steel CPM-S35VN 58 / 59HRC
Blade treatment: stonewashed
Manicure: Titanium 6AI4V
Blade Length: 90mm.
Blade thickness: 3.5mm.
Closed length: 123mm.
Overall length: 212mm.
Closed thickness: 17mm.
Balance: -
Weight: 142g.
Closure: Frame Lock
Clip: stainless steel
Sheath: -
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: -UMN-1000 -
Chris Reeve - Professional Soldier by W. Harsey - Tanto - 2017 Version - knife
Use target: Neck Knife / Sportsman / Tactical
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN 55 / 57HRC
Surface treatment: PVD
Handle: Stainless steel CPM-S35VN 58 / 59HRC
Blade Length: 86mm.
Blade thickness: 4.2mm.
Total length: 184mm.
Weight: 85g.
Sheath: in Kydex, ultra-thin
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: Design by William W. HarseyPRO-1002 -
Chris Reeve - Professional Soldier by W. Harsey - Insingo - 2017 Version - knife
Use target: Neck Knife / Sportsman / Tactical
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN 55 / 57HRC
Surface treatment: PVD
Handle: Stainless steel CPM-S35VN 58 / 59HRC
Blade Length: 86mm.
Blade thickness: 4.2mm.
Total length: 184mm.
Weight: 85g.
Sheath: in Kydex, ultra-thin
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: Design by William W. HarseyPRO-1001 -
Chris Reeve - Professional Soldier by W. Harsey - Drop - 2017 Version
Use target: Neck Knife / Sportsman / Tactical
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN 55 / 57HRC
Surface treatment: PVD
Handle: Stainless steel CPM-S35VN 58 / 59HRC
Blade Length: 86mm.
Blade thickness: 4.2mm.
Total length: 184mm.
Weight: 85g.
Sheath: in Kydex, ultra-thin
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: Design by William W. HarseyPRO-1000 -
Chris Reeve - Pacific Dark Eart by W. Harsey - 2017 Version - knife
Purpose of use: Collection / Utility
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: PVD
Handle: Black Canvas Micarta
Blade Length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyPAC-1005 -
Chris Reeve - Pacific Plain by W. Harsey - 2017 Version - knife
Purpose of use: Collection / Utility
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: PVD
Handle: Black Canvas Micarta
Blade Length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyPAC-1000 -
Chris Reeve - Small Inkosi knife - knife
Purpose: Sportsman / Collectibles
Type of production: Semi-craftsmanship
Blade Production: USA
Blade: Stainless steel CPM-S35VN 58 / 59HRC
Blade treatment: stonewashed
Manicure: Titanium inlay
Blade Length: 70mm.
Blade thickness: 3.5mm.
Closed length: 95mm.
Total length: 165mm.
Closed thickness: 17mm.
Balance: -
Weight: 78g.
Closure: Frame Lock
Clip: stainless steel
Sheath: -
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: -SIN-1000 -
Chris Reeve - Small Sebenza 21 Cross Hatch - knife
Purpose: Sportsman / Collectibles
Type of production: Semi-craftsmanship
Blade Production: USA
Blade: Stainless steel CPM-S35VN 58 / 59HRC
Blade treatment: stonewashed
Manicure: Titanium
Blade Length: 75mm.
Blade thickness: 3.5mm.
Closed length: 100mm.
Total Length: 175mm.
Closed thickness: 17mm.
Balance: -
Weight: 78g.
Closure: Frame Lock
Clip: stainless steel
Sheath: -
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: -S21-1036 -
Chris Reeve - Large Sebenza 21 - Plain Insingo - knife
Intended use: collection / sports
Type of production: Semi-Artisan
Production Lama: USA
Blade: CPM-S35VN 58 / 59HRC stainless steel
Handle: Titanium with micarta inserts
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 210mm.
Thick when closed: 17mm.
Weight: 134g.
Closure: Frame Lock
Clip: removable, in titanium
Packaging: white cardboard box with Chris Reeve logos and warranty certificatesL21-1008 -
Chris Reeve - Pacific by W. Harsey - 2017 Version - knife
Purpose of use: Collection / Utility
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: PVD
Handle: Black Canvas Micarta
Blade Length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyPAC-1001 -
Chris Reeve - Green Beret 5.5" Dark Earth by W. Harsey - 2017 Version - knife
Purpose: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Dark Earth PVD
Handle: Black Canvas Micarta
Blade Length: 140mm.
Blade thickness: 5.58mm.
Total length: 276mm.
Balance: on the lower guard branch
Weight: 335g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyGB5-1003 -
Chris Reeve - Green Beret 7" Dark Earth by W. Harsey - 2017 Version - knife
Purpose: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Dark Earth PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyGB7-1003 -
Chris Reeve - Green Beret 7" by W. Harsey - 2017 Version - knife
Purpose: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Black PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyGB7-1001 -
Chris Reeve - Mk IV 28 Year Commemorative knife
Chris Reeve - Mk IV 28 Year Commemorative knife
For 28 years, (the A2 round handled) One Piece Range of knives has been an essential part of Chris Reeve Knives. From Chris first designing the concept while serving in the South African Army in Namibia to today, these knives have been used, carried, admired and collected in all corners of the world.
An integral part of the success of this range has been Eddie Myers. Eddie was Chris's foreman when Chris was an apprentice tool and die maker. They have known each other more years than they care to count and Chris has always regarded Eddie as mentor, teacher, friend and consultant! For 25 years, Eddie has machined the blanks for our One Piece Knives. Still living in South Africa, Eddie and his wife Caroline, have provided fine service to deliver the best blanks at the best price. (There is no question that the volatility of the South African currency has helped over the years!)
Eddie and Caroline want to retire. Ed wants to buy a boat again and go fishing whenever he feels like it! This brought us to a cross-roads--do we try to source a vendor in the USA or should we simply retire a - Classic. We have decided to take the second choice--to discontinue the One Piece Range.
To celebrate the end of this era, Chris Reeve Knives offered a limited edition of 250 Commemorative Mk IVs. The Mk IV was the first iteration of the one piece concept to become known there is still call for this model which we initially discontinued in 1995. It has a 7 inch blade with a clip point and sawback. For this commemorative edition, the butt cap is engraved and polished and the sheath has a commemorative logo embossed.
Specifications
Blade Material: A2 tool steel
Blade Hardness: 55-57 RC
Blade Coating: KG Gun-Kote
Blade Length: 7" sawback blade
Blade Thickness: 0.187"
Overall Length: 12"
Handle Material: A2 Tool Steel
But Cap Material: D65S aluminum
Sheath: Leather with horizontal carry belt loop, Snap
Weight: 12.90 oz. (365 grams)
Limited Edition, only 250 pieces produced!
Handmade in the USA
One Piece Knife ConceptThe idea of the one piece knife was born while Chris was serving time in the South African Army on the Namibia/Angola border in 1979. The experiences of military service have contributed substantially to the features in these knives.
Chris realized that the ideal working knife was a tool which was strong, reliable and impervious to temperature and humidity. Extensive time has been devoted to design, and research and development to improve both the blade designs and the methods used in making the knives.
Each knife is made from a solid billet of A2 tool steel. The stock removal method results in two distinct advantages--the strength/weight ratio is exceptional and there is no handle/blade join. This means that there is no area where the blade and handle could come apart--a weakness in the design of other hollow handle knives. The handle cavity is larger than that of any similar knife. The hollow handle is closed with a butt cap made of 6061 aluminum which screws into the handle against a Neoprene "O" ring, ensuring the cavity is sealed from dust and moisture. All the one piece knives are hardened to 55-57 RC and random checks are made to ensure accuracy. This hardness gives superb toughness, good edge retention and allows for efficient sharpening in the field. Each knife is coated with super hi-tech KG Gun-Koteä originally developed for use in the aerospace industry. This coating offers a durable, long-lasting, non-reflective covering. Included in the price of each knife is a hand-made leather sheath. A lifelong guarantee, signed by Chris accompanies each knife.
The one piece design offers the highest possible weight/strength ratio
A2 Tool Steel offers excellent edge retention and good shock resistance
Hardness at between 55 and 57 Rockwell C is not brittle but gives good edge retention along with ease of sharpening
An 8" hollow grind is used with a full thickness back edge. All designs are ground to allow the full thickness of the back edge to come as close to the point as possible, affording a very strong front tip but not restricting the knife's ability to pierce
The hollow handle, which is created to reduce weight, is larger than any similar sized knife because there is no join between handle and blade
The aluminum butt cap provides an airtight closure for the hollow handle and is designed so that it can be used for hammering. Because using the knife as a hammer can be dangerous to one's knuckles and fingers, we do not recommend that this be done unless in an emergency situation. It is preferable to use a hammer
Full depth precision machined knurling affords maximum non-slip grip
Non-reflective KG Gun-Koteä coating gives lasting protection
All knives carry a lifetime guarantee and a damaged knife will be replaced or repaired at Chris' discretion. This guarantee does not cover damage to a knife that has been thrown or used for heavy levering
These knives are used by hunters, backpackers, SWAT teams, military personnel, firefighters and police all over the world. They are also to be found in many knife collections and most of our customers own more than one of our knives
Each hand made leather sheath is designed to fit the knife well, to give maximum protection to the carrier and the knife when being carried. Because we continue to improve our design, sheaths supplied might not be exactly as shown in the brochure
Replacement butt caps and sheaths are available at reasonable prices
Many customers feel that once their knives have been used, they lose collector's value. This is not so as the knife can be returned to Chris Reeve Knives, where it will be sandblasted, re-coated with KG Gun-Kotea, sharpened and returned to it's original condition. Contact Chris Reeve Knives for cost. Please return knife in sheathCR-MkIV -
Chris Reeve - Large Inkosi - folding knife
Intended Use: Collection / Sports
Blade: CPM-S35VN stainless steel 58/59 HRC
Country of Origin: USA
Finish: stonewashed
Handle: Titanium
Blade length: 92mm.
Blade Thickness: 3.56mm.
Closed Length: 123mm.
Overall length: 212mm.
Weight: 140g.
Lock: Frame Lock
Clip: Titanium
Packaging: cardboard box with CRK logos, microfiber cloth, guarantee certificates
Notes: -LIN-1000 -
Citadel - Phan Theit Water knife - Friction folder Bufalo - handmade knife
Intended use: collection / sports
Type of production: Artisan
Production Lama: Cambodia
Blade: DNH7 carbon steel
Blade treatment: -
Handle: Water Buffalo Horn
Blade length: about 76mm.
Blade thickness: about 3mm.
Closed length: about 103mm.
Total length: about 180mm.
Thick when closed: about 15mm.
Balancing: -
Weight: about 120g.
Closure: without blade lock
Clip: -
Sheath: cordura bag
Packaging: -
Note: -CIT-PTW -
Chris Reeve - Sikayo - 6.5" Santoku - Kitchen Knife
Uso Consigliato: verdura, carne cruda, pesce
Produzione: Idaho, USA
Lama: in acciaio inox CPM-S35VN con finitura Silver PVD
Taglio: di tipo asimmetrico, non adatta a mancini
Lunghezza Lama: 165mm.
Lunghezza Totale: 286mm.
Impugnatura: Ultem 1000 (un particolare polimero incredibilmente resistente ad abrasioni e ad alte temperature)
Spessore Lama: 3.8mm.
Peso: 179g.12428 -
Chris Reeve - Nyala Insingo - knife
Destinazione d'uso: Caccia/Sportivo
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio inox CPM-S35VN 58/59HRC
Trattamento Lama: Stone Washed
Manicatura: Brown canvas Micarta
Lunghezza lama: 95mm.
Spessore lama: 4.5mm.
Lunghezza chiuso: -
Lunghezza totale: 216mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 175g.
Chiusura: -
Clip: -
Fodero: Cuoio marrone by Gfeller Casemakers
Confezione: Scatola di cartone bianca con loghi Chris Reeve; certificati di garanzia
Note: -12424 -
Chris Reeve - Ubejane Skinner - coltello
Raro coltello fuori serie realizzato nel 2009 da Chris Reeve.
Il nome Ubejane significa Rinoceronte nella lingua Zulu in South Africa.
Destinazione d'uso: Collezione/Caccia/Sportivo
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio A2 55/57HRC
Trattamento Lama: black
Manicatura: Brown canvas Micarta
Lunghezza lama: 100mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 230mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 312g.
Chiusura: -
Clip: -
Fodero: Cuoio nero
Confezione: Scatola di cartone bianca con loghi Chris Reeve; certificati di garanzia
Note: coltello fuori produzione dal 2011CR-SKINNER -
Chris Reeve - Impofu 10" Limited Edition - knife
Collini Cutlery is the official distributor for Italy of tactical knives / collection made in the USA Chris Reeve
Made at the Blade Show in 2014 in a limited edition of only 500 pieces worldwide, the impofu (eland antelope, Lungu in Zulu) is a fixed blade knife largest and most impressive ever produced by Chris Reeve.
Use: Collection / Heavy Utility
Type of production: semi-homemade
Blade: Stainless Steel Tool CPM-3V 58 / 60HRC
Production Lama USA
Handle: Black Canvas Micarta
Blade length: 254mm.
Blade Thickness: 6.8mm.
Length closed: -
Overall length: 413mm.
Balancing: Advanced
Weight: 573g.
Closed: -
Sheath: Black Leather by Gfeller Casemakers
Notes: Production limited to 500 pieces worldwide - Certificate of Authenticity and warranty0038 -
Chris Reeve - Small Sebenza 21 - Unique Graphic Design - knife
Chris Reeve - Small Sebenza 21 - Unique Graphic Design - knife
Intended use: Collection / Sports
Blade: Stainless steel CPM-S35VN 58/59HRC
Handle: Titanium polished with computer graphics
Blade length: 73mm.
Blade Thickness: 3mm.
Closed Length: 98mm.
Overall length: 175mm.
Balancing: -
Weight: 80g.
Lock: Frame Lock
Clip: Titanium
Note: Product May 28, 201410203 -
Chris Reeve - Small Sebenza 21 - Unique Graphic Design - knife
Chris Reeve - Small Sebenza 21 - Unique Graphic Design - knife
Intended use: Collection / Sports
Blade: Stainless steel CPM-S35VN 58/59HRC
Handle: Titanium polished with computer graphics
Blade length: 73mm.
Blade Thickness: 3mm.
Closed Length: 98mm.
Overall length: 175mm.
Balancing: -
Weight: 80g.
Lock: Frame Lock
Clip: Titanium
Note: Product May 28, 201410980 -
Chris Reeve - Glorious Computer Graphic - Large Sebenza 21 - knife
Destinazione d'uso: Sportivo / Collezione
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: in acciaio inox CPM-S35VN 58/59HRC
Manicatura: Titanio 6AL4V, con incisioni Computer Graphic
Lunghezza lama: 90mm.
Spessore lama: 3mm.
Lunghezza chiuso: 120mm.
Lunghezza totale: 207mm.
Spessore da chiuso: 17mm
Peso: 125g.
Chiusura: Frame Lock
Clip: amovibile, in titanio
Confezione: scatola in cartone bianco con loghi Chris Reeve e certificati di garanzia, olio lubrificante, custodia da tasca in cuoio e panno in microfibra per la manutenzione10853 -
Cesare Tonelli - Engraved Buffalo Bone Integral Drop Point - custom knife
Blade: 59HRC 440C Stainless Steel
Handle: Buffalo Bone and 416 Stainless Steel
Blade Length: 96mm.
Blade Thickness: 5mm.
Overall Length: 209mm.
Weight: 206g.
Lock: -
Clip: -
Sheath: Handmaded, Brown Leather and Ostrich
Notes: Engraved by Luca Bertella and Fully handmaded in Italy by CIC Master Cesare Tonelli10153€490.98Out of stock -
Cesare Tonelli - Stag Horn Integral Clip Point - custom knife
Blade: 58HRC 440C Stainless Steel
Handle: Stag Horn and 416 Stainless Steel
Blade Length: 89mm.
Blade Thickness: 5mm.
Overall Length: 199mm.
Weight: 180g.
Lock: -
Clip: -
Sheath: Handmaded, Brown Leather and Ostrich
Notes: Fully handmaded in Italy by CIC Master Cesare Tonelli10152€400.82Out of stock -
Cesare Tonelli - RWL Steak Knife Loveless Micarta - custom knife
Intended use: Collection / Steak / Sports
Production Type: Handmade
Production Blade: Italy
Blade: Stainless steel RWL34 to 60HRC
Treatment Blade: Mirror Polishing
Handle material: Loveless Canvas Micarta with 416 stainless steel guard and passing
Blade length: 98mm.
Blade thickness: 4mm.
Total length: 212mm.
Weight: 62g.
Sheath: handmade and hand-sewn, leather with ostrich inserts
Notes: Handmaded by Cesare Tonelli, Maestro Coltellinanio CIC (Italian Knives Corporation)10151€204.10Out of stock -
Cesare Tonelli - RWL Steak Knife Black Micarta - custom knife
Intended use: Collection / Steak / Sports
Production Type: Handmade
Production Blade: Italy
Blade: Stainless steel RWL34 to 60HRC
Treatment Blade: Mirror Polishing
Handle material: Black Canvas Micarta with 416 stainless steel guard and passing
Blade length: 98mm.
Blade thickness: 4mm.
Total length: 212mm.
Weight: 62g.
Sheath: handmade and hand-sewn, leather with python inserts
Notes: Handmaded by Cesare Tonelli, Maestro Coltellinanio CIC (Italian Knives Corporation)10150€204.10Out of stock -
Cesare Tonelli - Clip Point Integral - custom knife
Blade: 58HRC 440C Stainless Steel
Handle: Loveless Micarta
Blade Length: 87mm.
Blade Thickness: 5mm.
Overall Length: 199mm.
Weight: 172g.
Lock: -
Clip: -
Sheath: Handmaded, Brown Leather
Notes: Fully handmaded in Italy by CIC Master Cesare Tonelli10095€368.03Out of stock -
Cesare Tonelli - RWL Drop Point Integral - custom knife
Blade: 60HRC RWL34 Stainless Steel
Handle: Loveless Micarta
Blade Length: 98mm.
Blade Thickness: 5mm.
Overall Length: 207mm.
Weight: 168g.
Lock: -
Clip: -
Sheath: Handmaded, Brown Leather
Notes: Fully handmaded in Italy by CIC Master Cesare Tonelli10094€409.02Out of stock -
Cesare Tonelli - Drop Point Integral - custom knife
Blade: 59HRC 440C Stainless Steel
Handle: Loveless Micarta
Blade Length: 98mm.
Blade Thickness: 5mm.
Overall Length: 207mm.
Weight: 168g.
Lock: -
Clip: -
Sheath: Handmaded, Brown Leather
Notes: Fully handmaded in Italy by CIC Master Cesare Tonelli10093€368.03Out of stock -
Chris Reeve - New Sebenza 25 - knife
Sebenza 25:
Making the Best Even Better
Virtually every year since the inception of the Sebenza in 1987 has seen small, incremental developments, improvements and changes. Celebrating the 25th anniversary of the Sebenza in 2012, Chris brought some new concepts to the Sebenza 25.
• Large Hollow Grind Technology—the first blade to feature this new grind that blends the best of hollow and flat grinds.
• Shaped phosphor bronze washer on the lock side brings additional stability to that side of the blade.
• One-eighth inch ceramic ball acts as the interface between the lock bar and the blade, and doubles to drop into the detent, ensuring the blade stays in place when closed.
• Larger perforations in the washers reduce friction, store more lubricant and offer space for small dirt particles to move away from the blade/washer interface, helping to prevent blade action from becoming “sticky”.
• 416 Heat treated stainless steel stop pin is interference fit into the lock side of the handle.
• Asymmetrical pattern thumb serrations on a curved thumb ramp of the blade give excellent purchase.
At 0.140” (3.56mm), the blade is more robust than previous Sebenza models.
SPECIFICATIONS:
Blade Material:
CPM S35VN Stainless Steel
Blade Hardness:
58-59 RC
Blade Length:
Large - 3.625" (92 mm)
Blade Thickness:
0.14" (3.56 mm)
Overall Length:
8.335" (212 mm)
Handle Length:
4.71" (147.64 mm)
Handle Material:
6Al4V Titanium
Handle Thickness:
0.150" (3.8 mm)
Weight:
5.2 oz. (145 g)
Fittings:
303 Stainless Steel
Double Thumblugs:
6Al4V Titanium
Pocket Clip:
6Al4V Titaniumsebenza25 -
Chris Reeve - Mnandi Elder Burl Inlay - knife
Intended use: Collection / Sports
Blade: stainless steel CPM-S35VN 58/59HRC
Handle: Titanium and Radica
Blade length: 70mm.
Blade Thickness: 2mm.
Closed Length: 91mm.
Total length: 156mm.
balance:
Weight: 40g.
Closure: Frame Lock
Clip: Stainless Steel
Sheath: Leather
Notes: Production certificate included: production date July 30, 2013 - Mnandi in Zulu means "very nice"0019R -
Citadel - Stavanger Green Grey Ray Skin - custom knife
WARNING: technical data of the knife are approximate and vary from knife to knife these are handmade products.
Intended Use: collection / sports
Production Type: Handmade
Production Blade: Cambodia
Blade: carbon steel DNH7
Treatment Lama: -
Handle: stingray leather
Blade length: about 50mm.
Blade thickness: approx 4mm.
Closed Length: about 82mm.
Total length: about 145m.
Thick when closed: about 15mm.
Balance: -
Weight: about 78g.
Lock: Liner lock
Clip: -
Sheath: sheath
package:
Notes: -10632 -
Citadel - Baltaka Knife - custom knife
These handmade knives are distinguished by their original line, but functional, well that is coupled alletradizionali manufacturing techniques and materials used.
The blades are in fact hardened coal until Adavere a hardness of about 40 HRC after which, after having been hand-hammered, back and sides are covered with clay and the wire refreshed to 60 HRC to have excellent cutting capacity, flexibility and penetration. The knife is then polished and sharpened by hand on stone and finished in every detail.Blade: Stainless DNH7
manicatura: wood
Blade length: 130 mm.
Handle Length: 70 mm.
Blade Thickness: 4.5 mm.
Total length: 270 mm.
Sheath: Leather brown handmade
Weight: 106 g.Note: Being craft knives, and finishes for slightly differing from each other, the knife itself may not be identical to that represented in the images.
10636 -
Citadel - True Knife - custom knife
These handmade knives are distinguished by their original line, but functional, well that is coupled alletradizionali manufacturing techniques and materials used.
The blades are in fact hardened coal until Adavere a hardness of about 40 HRC after which, after having been hand-hammered, back and sides are covered with clay and the wire refreshed to 60 HRC to have excellent cutting capacity, flexibility and penetration. Each knife is then polished and sharp hand-polished and finished in every detail.Blade: Stainless DNH7
manicatura: Micarta
Blade length: 60 mm.
Handle Length: 70 mm.
Blade thickness: 4 mm.
Total length: 164 mm.
Sheath: Leather brown handmade with horizontal mounting of the knife
Weight: 122 g.Note: Being craft knives, and finishes for slightly differing from each other, the knife itself may not be identical to that represented in the images.
10635 -
Citadel - Ola in plane tree wood - custom knife
WARNING: technical data of the knife are approximate and vary from knife to knife these are handmade products.
Intended Use: collection / sports
Production Type: Handmade
Production Blade: Cambodia
Blade: carbon steel DNH7
Treatment Lama: -
Handle: wood plane
Blade length: about 80mm.
Blade thickness: approx 4mm.
Closed Length: about 120mm.
Total length: about 210mm.
Thick when closed: about 20mm.
Balance: -
Weight: about 166g.
Lock: Liner lock
Clip: -
Sheath: -
Packaging: bag Cordura
Notes: -10634 -
Citadel - Friction Folder wood - custom knife
WARNING: technical data of the knife are approximate and vary from knife to knife these are handmade products.
Intended Use: collection / sports
Production Type: Handmade
Production Blade: Cambodia
Blade: carbon steel DNH7
Treatment Lama: -
Handle material: wood
Blade length: about 65mm.
Blade thickness: about 2mm.
Closed Length: about 154mm.
Total length: about 185mm.
Thick when closed: about 13mm.
Balance: -
Weight: about 68g.
Closing: -
Clip: -
Sheath: -
Packaging: bag Cordura
Notes: -10633 -
Citadel - Friction Folder - custom knife
WARNING: technical data of the knife are approximate and vary from knife to knife these are handmade products.
Intended Use: collection / sports
Production Type: Handmade
Production Blade: Cambodia
Blade: carbon steel DNH7
Treatment Lama: -
Handle material: wood
Blade length: about 65mm.
Blade thickness: about 2mm.
Closed Length: about 154mm.
Total length: about 185mm.
Thick when closed: about 13mm.
Balance: -
Weight: about 68g.
Closing: -
Clip: -
Sheath: -
Packaging: bag Cordura
Notes: -10362 -
Citadel - Nordic Inciso - 287 - coltello artigianale
Citadel - Nordic Big
Questi coltelli artigianali si distinguono per la loro linea originale, ma funzionale, che ben si accoppia alletradizionali tecniche realizzative ed ai materiali impiegati.
Le lame vengono infatti temprate a carbone fino adavere una durezza di circa 40 HRC dopodich, dopo essere state martellate a mano, dorso e lati vengono rivestiti di argilla ed il filo ritemprato a 60 HRC per avere ottime capacit di taglio, penetrazione e flessibilit. Il coltello viene poi lucidato ed affilato a mano su pietra e rifinito in ogni singolo dettaglio.
Lama: Acciaio DNH7 "Bruit de forge" a tempra selettiva 40/60 HRC con dorso lavorato a lima
manicatura: In Bosso con inserti in Corno di bufalo, legno di Padouk e di Ebano
Lunghezza lama: 95 mm.
Lunghezza impugnatura: 125 mm.
Spessore della lama: 4 mm.
Lunghezza totale: 215 mm.
Fodero: Cuoio marrone lavorato a mano
Peso: 105 g.
Nota: Essendo coltelli artigianali, e differendo leggermente per finiture l'uno dall'altro, il coltello da voi ordinato potrebbe non essere identico a quello rappresentato nelle immagini.3921 -
Chris Reeve - Large Sebenza 21 Inlay - Insigo Micarta - knife
Intended use: collection / sport
Type of production: Semi-craftsmanship
Blade Production: USA
Blade: Stainless steel CPM-S35VN 58 / 59HRC
Manicure: Titanium with micarta inserts
Blade Length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 210mm.
Closed thickness: 17mm.
Weight: 128g.
Closure: Frame Lock
Clip: removable, titanium
Packing: white cardboard box with Chris Reeve logos and warranty certificatesL21-1148 -
Chris Reeve - Small Sebenza 21 - Insingo Micarta
Intended Use: collection / sports
Type of production: Semi-Craft
Blade Production: USA Blade: stainless steel CPM-S35VN 58/59HRC
Handle: Titanium with polished inserts micarta
Blade length: 73mm.
Blade thickness: 3mm.
Closed Length: 98mm.
Total length: 175mm.
Thick when closed: 17mm
Weight: 82g. Closure: Frame Lock
Clip: removable titanium
Packaging: cardboard box with white logos Chris Reeve and warranty certificates
Notes: The word "Sebenza" in Zulu means "Work", while the word "Insingo" in Zulu means "Razor"0031I -
Chris Reeve - Mnandi Gabon Ebony Inlay - coltello
Destinazione d'uso: Collezione/Sportivo
Lama: in acciaio inox CPM-S35VN 58/59HRC
Manicatura: Titanio ed Ebano
Lunghezza lama: 70mm.
Spessore della lama: 2mm.
Lunghezza chiuso: 91mm.
Lunghezza totale: 156mm.
Bilanciatura:
Peso: 40g.
Chiusura: Frame Lock
Clip: in acciaio inox
Fodero: cuoio
Note: Certificato di produzione incluso: data di produzione 23 luglio 2012 - mnandi in zulu significa "molto bello"0019E -
Browning - Buck Mark caccia - coltello
Destinazione d'uso: caccia/sportivo
Lama: full-tang in acciaio inox 440C teflonato
Tipo di filo convessoProduzione Lama Italia
Manicatura: legno
Lunghezza lama: 95mm.
Spessore della lama: 3mm.
Lunghezza chiuso: -
Lunghezza totale: 225mm.
Bilanciatura: arretrata
Peso: 210g.
Chiusura: -
Clip: -
Fodero: in nylon
Note: -2441€90.16Out of stock -
Browning - Silhouette caccia - coltello
Destinazione d'uso: caccia/sportivo
Lama: full-tang in acciaio inox 440C teflonato
Produzione Lama Italia
Manicatura: legno
Lunghezza lama: 95mm.
Spessore della lama: 3mm.
Lunghezza chiuso: -
Lunghezza totale: 225mm.
Bilanciatura: arretrata
Peso: 200g.
Chiusura: -
Clip: -
Fodero: in nylon
Note: -2442€90.16Out of stock -
Chris Reeve - Green Beret 5.5 "- knife
Chris Reeve - Green Beret 5.5 "- knife
Intended use: Collection / Allround / Fighter
Type of production: handmade
Blade: Stainless CPM-S30V 55/57HRC
Production Lama USA
Handle: Black Canvas Micarta
Blade length: 140mm.
Blade Thickness: 5.8mm.
Length closed: -
Total length: 275mm.
Balance: on the branch of lower guard
Weight: 320g.
Closing: -
Clip: -
Sheath: Nylon SpecOps
Note: Certificates of authenticity and warranty0013 -
Chris Reeve - Inyoni coltello
Novità 2007 direttamente dallo Shot Show di Orlando, Florida
Destinazione d'uso: sportivo/caccia
Lama: in acciaio inox CPM-S30V 58/59HRC
Trattamento Lama: stonewash finish
Manicatura: Legno di cocobolo
Lunghezza lama: 88mm.
Spessore della lama: 3.5mm.
Lunghezza chiuso: -
Lunghezza totale: 201mm.
Bilanciatura: arretrata
Peso: 76g.
Chiusura: -
Clip: -
Fodero: in cuoio
Note: inyoni in zulu significa uccello0022 -
Chris Reeve - Large Sebenza 21 - African Blackwood - coltello
Destinazione d'uso: collezione
Tipo di produzione: Artigianale
Produzione Lama: USA
Lama: in acciaio inox CPM-S30V 58/59HRC
Manicatura: Titanio lucidato e inserto African Blackwood
Lunghezza lama: 90mm.
Spessore lama: 3mm.
Lunghezza chiuso: 120mm.
Lunghezza totale: 207mm.
Spessore da chiuso: 17mm
Peso: 125g.
Chiusura: Frame Lock
Clip: amovibile, in titanio
Confezione: scatola in cartone bianco con loghi Chris Reeve e certificati di garanzia0033 -
Chris Reeve - Large Sebenza 21 Cross Hatch - knife
Purpose: Sportsman / Collectibles
Type of production: Semi-craftsmanship
Blade Production: USA
Blade: Stainless steel CPM-S35VN 58 / 59HRC
Blade treatment: stonewashed
Manicure: Titanium
Blade Length: 90mm.
Blade thickness: 3.5mm.
Closed length: 120mm.
Total length: 210mm.
Closed thickness: 17mm.
Balance: -
Weight: 130g.
Closure: Frame Lock
Clip: stainless steel
Sheath: -
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: -L21-1036 -
Chris Reeve - Mnandi Bocote - coltello
Destinazione d'uso: Collezione/Sportivo
Lama: in acciaio inox CPM-S35VN 58/59HRC
Manicatura: Titanio e Bocote
Lunghezza lama: 70mm.
Spessore della lama: 2mm.
Lunghezza chiuso: 91mm.
Lunghezza totale: 156mm.
Bilanciatura:
Peso: 40g.
Chiusura: Frame Lock
Clip: in acciaio inox
Fodero: cuoio
Note: mnandi in zulu significa "molto bello"0019 -
Chris Reeve - Neil Roberts 6 "knife - knife
The Collini Cutlery is official distributor for Italy of the tactical knives / collection made in USA Chris Reeve
Intended use: Fighter / Tactical
Type of production: Artisan
Blade: stainless steel CPM-S35VN 55 / 57HRC
Lama production: USA
Handle: Black Canvas Micarta
Blade length: 170mm.
Blade thickness: 5.8mm.
Length closed: -
Total length: 290mm.
Balancing: set back to 1cm. from the lower guard branch
Weight: 356g.
Closure: -
Clip: -
Sheath: by SpecOps, in cordura
Notes: single-piece knife from 2007 - production ranksCR0014 -
Chris Reeve - Nyala - coltello
Destinazione d'uso: Caccia/Sportivo
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio inox CPM-S35VN 58/59HRC
Trattamento Lama: Stone Washed
Manicatura: Brown canvas Micarta
Lunghezza lama: 95mm.
Spessore lama: 4.5mm.
Lunghezza chiuso: -
Lunghezza totale: 216mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 175g.
Chiusura: -
Clip: -
Fodero: Cuoio marrone by Gfeller Casemakers
Confezione: Scatola di cartone bianca con loghi Chris Reeve; certificati di garanzia
Note: -0035 -
Chris Reeve - Pacific by W. Harsey - black canvas micarta - knife
Winner of "American year knife" to Blade Show 2007.
The Pacific, born of the fruitful collaboration between Reeve and HARSEY is the civilian version of the model Green Beret created to celebrate the 50th Anniversary of "the 1st Special Forces Group" department that has operated in Asia and the Pacific; the name of the knife derives the operating environment of the department.
Intended use: Fighter / Utility Light
Type of production: semi-industrial
Blade: full tang CPM-S35VN Steel 55 / 57HRC with GunKote finish
Country of production: Idaho - USA
Handle: Black Canvas Micarta
Blade length: 150mm.
Blade Thickness: 5.8mm.
Overall length: 315mm.
Balance: on the lower part of the guard
Weight: 336g.
Sheath: Nylon, made in USA, with leg attacks and Type M.O.L.L.E.
Notes: Certificate of guarantee and authenticity0026 -
Chris Reeve - Professional Soldier - coltello
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli tattici/collezione made in USA Chris Reeve
Destinazione d'uso: Sportivo / Tattico
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio inox CPM-S35VN 55/57HRC
Trattamento Lama: KG Gun-Kote
Manicatura: In acciaio inox CPM-S35VN 55/57HRC
Lunghezza lama: 86mm.
Spessore lama: 4.1mm.
Lunghezza chiuso: -
Lunghezza totale: 184mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 85g.
Chiusura: -
Clip: -
Fodero: in Kydex by Blade Tech
Confezione: scatola in cartone bianco con loghi Chris Reeve, Certificati di garanzia
Note: Design by Bill Harsey0030 -
Chris Reeve - Small Inkosi Inlay micarta natural canvas - knife
Purpose: Sportsman / Collectibles
Type of production: Semi-craftsmanship
Blade Production: USA
Blade: Stainless steel CPM-S35VN 58 / 59HRC
Blade treatment: stonewashed
Manicure: Titanium inlay
Blade Length: 70mm.
Blade thickness: 3.5mm.
Closed length: 95mm.
Total length: 165mm.
Closed thickness: 17mm.
Balance: -
Weight: 78g.
Closure: Frame Lock
Clip: stainless steel
Sheath: -
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: -SIN-1014