Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Spyderco - Silverax - CPM-S30V & Carbon Fiber - PRIVATE COLLECTION - C228CFP - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: New
* Commercially available: Discontinued
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / CollectionProduction Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S30V
Blade Finish: Satin finish
Handle: Carbon Fiber and G10 Laminate
Blade Length: 88mm.
Blade thickness: 3.5mm.
Length closed: 118mm.
Total length: 203mm.
Weight: 94g.
Closure: Compression Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife, from private collectionC228CFP-CP -
Giant Mouse - ACE Sonoma V2 - Elmax & Green Canvas Micarta - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used.
* Condition: Very good condition, with a few small marks on blade and handle.
* Commercially available: Discontinued
* Sharpening: Professionally re-sharpened.
* Marks on blade: Small, unnoticeable scratches on the tip of the blade.
* Marks on handle: A small mark near the clip housing.
* Packaging: Yes
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory
Production Type: Industrial
Country of Production: China (by Reate Knives)
Blade: Elmax stainless steel
Blade finish: satin finish
Handle: green cavnas micarta with brass spacer
Blade length: 87mm.
Blade thickness: 3.5mm.
Length closed: 114mm
Total length: 203mm.
Thickness when closed: 14mm.
Weight: 85g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: cardboard box with Giant Mouse logos
Notes: discontinued knife, winner of the "2023 BEST EDC CHAMPION" award by CarryologyGM-ACESO-CP -
William Henry - Signature Collection B12-FTD - Damascus ZDP-189 and Titanium - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Out of production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: some minor scuffs and hairlines on the right side
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratoryIntended Use: Collection
Production type: MidTech
Country of manufacture: USA
Blade: stainless rolled damascus with wave design, 45-ply and ZDP-189 cutting edge
Blade finish: -
Handle: titanium with blue anodized and topaz set
Blade length: 79mm.
Blade thickness: 2.3mm.
Length closed: 100mm.
Total length: 180mm.
Weight: 57g.
Closure: Button Lock with embedded topaz
Sheath: leather, with stainless steel clip
Packaging: cardboard box with William Henry logos and warranty certificate
Notes: previously purchased knife, from a private collectionWH-BF12-CP -
Frank Centofante - SL-10 - ATS34 & Micarta #049 - PRIVATE COLLECTION - handmade knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 12/1990 model, overall in good condition, with a few small marks from time
* Commercially available: Limited edition, numbered model, made entirely by hand; craftsman passed away in 2009
* Sharpening: Re-sharpened, a few small marks on blade due to sharpening
* Marks on blade: A few small marks
* Marks on handle: A few hairlines on the bolsters and a small dent on the left micarta handle.
* Box: -
* Scabbard: Suede leather case.
* Manuals, Certificates and Warranties: Certificate of authenticity with date of manufacture and craftsman's signature.
* Checked and Certified by our in-house laboratoryIntended Use: Collection/Gentleman
Type of production: Handcrafted
Country of Production: USA
Blade: stainless steel ATS34
Blade finish: satin finish
Handle: Stainless steel and Micarta
Blade length: 83mm
Blade thickness: 2.5mm.
Length closed: 108mm.
Total length: 189mm.
Thickness when closed: 8mm.
Weight: 99g.
Closure: Back Lock
Clip: -
Sheath: Suede leather pouch
Packaging: -
Notes: rare handcrafted knife made in December 1990 by noted U.S. knife maker Frank Centofante who passed away in 2009, serial number #049FC-SL10-CP -
Spyderco - Domino - CTS-XHP & Cubic Check Carbon Fiber - C172CFTIP - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: Overall in very good condition
* Commercially available Discontinued, remained on the market from 2013 to 2017.
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: A few small abrasion marks on the clip.
* Box: -
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / EDCProduction Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CTS-XHP
Blade finish: Satin finish
Handle: Titanium and Carbon Fiber laminated Cubic Check
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 116mm.
Total length: 195mm.
Weight: 119g.
Closure: Frame Lock R.I.L. (Reeve Integral Lock)
Clip: Multiposition and removable, stainless steel
Notes: Previously purchased knife from a private collection - Design by Eric Glesser - Opening via patented Carson Flipper system - Pivot on ball bearingsSC172CFTIP-CP -
Spyderco - Ladybug 3 - LBKS3 - knife
Intended use: Sporting/EDC
Production type: Industrial
Blade production: Japan
Blade: VG-10 stainless steel
Blade treatment: -
Handle: FRN
Blade length: 49mm.
Blade thickness: 2mm.
Length closed: 62mm.
Total length: 111mm.
Thickness when closed: 8mm.
Balance: -
Weight: 14g.
Closure: Back Lock
Clip: -
Sheath: -
Packaging: cardboard case with Spyderco logos
Notes: -LBKS3 -
Boker - Annual Damascus 1991 Knife - Limited Edition - PRIVATE COLLECTION - Knife
The Böker Annual Damascus 1991 knife is not just a tool, but a true investment of value, a treasure destined not only for knife lovers but for anyone who appreciates the art and tradition behind such a sought-after object.
This limited piece, part of a private collection and now out of production, represents a unique specimen, numbered and limited to only 999 pieces worldwide.
WITHDRAWN FROM PRIVATE COLLECTION
- Type: Previously Purchased
- Condition: As good as new
- Available in the market: Out of production, numbered and limited to 999 specimens
- Sharpening: Factory sharpening
- Blade marks: No
- Handle marks: No
- Box: Present
- Sheath: Not applicable
- Manuals, Certificates, and Warranties: Present
- Checked and Certified by our internal laboratory
Use Destination: EDC/Gentleman/Collection
Type of production: Industrial
Country of production: Germany - Solingen
Blade: in 300-layer artisanal Damascus steel
Handle: stabilized root wood
Blade length: 80mm
Blade thickness: 2mm
Total length: 186mm
Weight: 136g
Closure: back lock
Packaging: Wooden box with paper certificate and warranty
Note: numbered and limited specimen, as good as new, withdrawn from private collection
BO-1991DC -
Dietmar Kressler - Integral Drop Point - K190 & Snakewood - PRIVATE COLLECTION - craft knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 1989 model, in like-new condition.
* Commercially available: Unique specimen, entirely handmade
* Sharpening: Factory sharpened.
* Marks on blade: None
* Marks on handle: None
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks of time.
* Manuals, Certificates and Warranties: Warranty certificate issued by the Italian dealer of the time, not stamped or signed.
* Checked and Certified by our in-house laboratoryIntended Use: Collection/Gentleman
Type of production: Handcrafted
Country of Production: Germany
Blade: Bohler K190 powder steel at 62HRC
Blade finish: horizontal satin finish
Handle: integral, from solid, with snakewood grips
Blade length: 83mm
Blade thickness: 4mm.
Total length: 187mm.
Weight: 139g.
Sheath: leather, belt
Packaging: -
Notes: rare handcrafted knife made in 1989 by renowned German cutler Dietmar KresslerFC-KRES-SW-CP -
Spyderco - Street Beat by Fred Perrin - PRIVATE COLLECTION - FB15P - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased.
* Condition: Overall in good
* Commercially available: Discontinued in 2017.
* Sharpening: Professionally re-sharpened.
* Marks on blade: Small signs of wear and tear.
* Marks on handle: None
* Box: Present and original
* Scabbard: Present and original, modified for belt carry.
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / Sporting / Neckwear
Production Type: Industrial
Country of Production: Japan
Blade: full tang, Stainless steel VG-10
Blade finish: satin finish
Handle: Micarta
Blade length: 85mm.
Blade thickness: 4mm.
Total length: 181mm.
Weight: 148g.
Sheath: Neck, boltaron, with possibility of Tek-Lok or MOLLE type attachments
Packaging: Cardboard box with Spyderco logos.
Notes: Design by Fred Perrin - Discontinued item, previously purchased, from private collection - Supplied with two removable attachments for belt carrySFB15P-CP -
Chris Reeve - Ti-Lock Stone Washed - NOS Full Set - PRIVATE COLLECTION - folding knife
NOS FULL SET KNIFE, NEW FROM STOCK
* Type: 2001 NOS new old stock - New from stock.
* Condition: Like new, never taken out of original packaging.
* Commercially available Out of production
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.
The Ti-Lock mechanism was originally designed to isolate the locking mechanism from the handle of the knife so that it can offer greater freedom of design. Totally ambidextrous, the Ti-Lock is not meant to be a mere exercise in style, but should be understood as a mechanical innovation and a solid and reliable testament to the passion of Chris Reeve and Grant and Gavin Hawk.
Intended Use: Sporting/Collection
Type of production: Semi-manufactured
Country of Production: USA
Blade: CPM-S35VN 58/59HRC stainless steel
Blade Treatment: Stonewashed
Handle: Titanium 6AI4V Stone Washed
Blade Length: 82.5mm.
Blade Thickness: 3.2mm.
Length closed: 100mm.
Total length: 182.5mm.
Weight: 85g.
Closure: Ti-Lock titanium 6AI4V
Clip: Titanium 6AI4V
Packaging: Cardboard box with Chris Reeve logos, certificates
Notes: Design by Grant and Gavin Hawk - NOS knife, new from stock - Includes box and certificatesCR-TILSW-CP -
Al-Mar - SERE Attack 3003/B - PRIVATE COLLECTION - vintage knife
Rare knife produced by the Japanese Al-Mar in the late 80s and early 90s, now out of production and no longer available. Knife withdrawn from private collection and out of production - Knife slightly used, with small shallow marks on the left side of the blade, original leather sheath never used and never worn, including box (not original). The rubber grip has a slight break, with a small missing part, in the upper right rear part, near the corrugation. - Checked, re-sharpened and certified by our internal Collini Cutlery laboratory.
Intended use: Collection / Tactical
Type of production: Industriae
Country of production: Japan, Seki
Blade: AM-6 stainless steel
Blade treatment: satin finish
Handle: in rubber, with brass spacers
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 150mm
Total length: 255mm.
Weight: 320g.
Closing: Back Lock
Sheath: leather, new
Packaging: cardboard box, with Japanese logos, but not original Al-Mar
Notes: withdrawn from private collection - used - re-sharpened - with "DEOPPRESSOLIBER" logo on the left headAM-3002DOL -
Boker - 1992 Vintage Trapper - Wildlife Series Limited Edition - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Out of production, numbered and limited edition
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Small rubbing marks on the Alpacca heads
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and certified by our in-house laboratory
Intended use: EDC/Gentleman
Production type: Industrial
Country of manufacture: Germany - Solingen
Blade: Stainless steel 420
Blade treatment: Mirror polished
Handle: Coloured bone
Blade length: 83mm.
Blade thickness: 2mm.
Total length: 186mm.
Weight: 72g.
Closure: SlipJoint (without blade lock)
Packaging: Cardboard box with Boker Wildlife Series 1992 logos, paper certificate and warranty
Notes: Numbered and limited edition, like new, taken from a private collectionBO-1992WS -
Boker - Bud Nealy MCS Cocobolo Knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like New
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present - Original
* Scabbard: Present - Original, with all accessories included.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / Neck Knife / CQD
Country of Production: Germany
Blade: full tang in 440C 58/60HRC stainless steel
Handle: cocobolo wood
Blade length: 85mm.
Blade thickness: 3mm.
Total length: 185mm.
Balance: Backward
Weight: 90g.
Clip: MCS2 System that allows 9 different carry options, all explained in the manual
Sheath: Ultra flat Kydex sheath with additional magnetic retention
Notes: knife withdrawn from private collection, like new
Biographical Note:
Bud Nealy is universally recognized as one of the best knifemakers in the world. He is also known as the inventor of the MCS (Multi Concealment Sheath) system that allows the knife to be placed securely in any type of position. And it is because of these two requirements that every day hundreds of his MCS systems are used by police officers, undercover agents, S.W.A.T. and R.A.I.D. members, U.S. embassy guards, Bodyguards and Air Rangers.BO-BNMCS-CP -
Roberto Bernini - Fixed Hunter in Sambar Deer - PRIVATE COLLECTION - handcrafted hunting knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available On commission
* Sharpening: Factory.
* Marks on blade: A couple of imperceptible marks on the satin finish, presumably from being inserted in the scabbard
* Marks on handle: No.
* Packaging: Zip pouch, original
* Scabbard: Leather, handcrafted, original
* Manuals, Certificates and Warranties: Certificate of guarantee and authenticity present.
* Checked and Certified by our in-house laboratory
Intended use: hunting / collection
Type of production: handcrafted
Country of production: Italy
Blade: stainless steel ATS-34 60HRC
Blade finish: satin finish
Handle: deer Sambar with stainless steel 416 guard
Blade length: 87mm.
Blade thickness: 4mm.
Total length: 198mm.
Weight: 80g.
Sheath: handcrafted, leather, for vertical belt carry
Packaging: zippered case and certificate of authenticity and guarantee from the Corporazione Italiana Coltellinai
Notes: Designed and made entirely by hand in Italy by Master CIC Roberto Bernini, specimen dated November 2010 - Previously purchased, from private collectionAP-BER-HCV -
Chris Reeve - Ti-Lock Stone Washed - PRIVATE COLLECTION - folding knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Absent
* Scabbard: Absent
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory
The Ti-Lock mechanism was originally designed to isolate the locking mechanism from the handle of the knife so that it can offer greater freedom of design. Totally ambidextrous, the Ti-Lock is not meant to be a mere exercise in style, but should be understood as a mechanical innovation and a solid and reliable testament to the passion of Chris Reeve and Grant and Gavin Hawk.
Intended Use: Sporting/Collection
Type of production: Semi-manufactured
Country of Production: USA
Blade: CPM-S35VN 58/59HRC stainless steel
Blade Treatment: Stonewashed
Handle: Titanium 6AI4V Stone Washed
Blade Length: 82.5mm.
Blade Thickness: 3.2mm.
Length closed: 100mm.
Total length: 182.5mm.
Weight: 85g.
Closure: Ti-Lock titanium 6AI4V
Clip: Titanium 6AI4V
Packaging: -
Notes: Design by Grant and Gavin Hawk - Knife from a private collection.AP-0037SW -
Spyderco - Assist Knife - C79BK - PRIVATE COLLECTION - knife
KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition
* Commercially available Discontinued as of 2019
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present and original, but without label and with signs of wear and tear
* Scabbard: Not present
* Manuals, Certificates and Warranties: No
* Checked and certified by our internal laboratory
Intended use: SportingType of production: industrial
Blade: stainless steel VG-10
Blade finish: satin-finished
Country of manufacture: Japan
Handle: FRN Black
Blade length: 94mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 213mm.
Weight: 115g.
Closure: Back Lock
Clip: Removable, double positioning, stainless steel
Notes: Version remained in production approximately from 2004 to 2019 - specimen withdrawn from private collection, overall in good condition. Equipped with retractable glass breaker and whistle integrated in the handle.AP-C79BK -
Quartermaster - QSE-5 Mr. Roper - Limited Edition - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued since 2014, limited edition made of only 300 pieces.
* Sharpening: Factory sharpened, improvable
* Marks on blade: None
* Marks on handle: Very small abrasions on titanium and hardware.
* Box: Present - Original
* Scabbard: Present - Original.
* Manuals, Certificates and Warranties: Certificate with date of manufacture, serial number and signature.
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / EDC
Production Type: Industrial
Country of Production: USA
Blade: sintered stainless steel CPM-154CM
Blade Finish: Stone Washed
Handle: Microblasted Titanium
Blade Length: 76mm.
Blade thickness: 4.7mm.
Total length: 190mm.
Thickness when closed: 12mm.
Weight: 115g.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Quartermaster logos
Notes: Knife withdrawn from a private collection, previously purchased - Limited edition specimen of only 300, individually numbered on blade and box (knife number #159)QTR-QSE5-CP -
Sergio Consoli - Folder Liner Lock - PRIVATE COLLECTION - holographic resin handle - N ° 480
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production single piece produced in 2019
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box: -
* Sheath: no
* Manuals, Certificates and Warranties: original
* Checked and certified by our internal laboratoryIntended use: Collection
Type of production: Artisan by CIC Master Sergio Consoli
Production Lama: Italy
Blade: full-tang stainless steel RWL-34 60 / 61HRC
Blade treatment: -
Handle: holographic resin handle with titanium spacer
Blade length: 85mm.
Blade thickness: 4mm.
Closed length: 120mm.
Total length: 205mm.
Thick when closed: 19mm.
Balancing: -
Weight: 132g.
Closure: Liner Lock
Clip: -
Sheath: -
Packaging:
Notes: Handmade by Master Sergio Consoli - knife number 480 made in 2019CON-480 -
Zero Tolerance - ZT0460 - Sinkevich - Bronze Carbon Fiber - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued as of the end of 2021
* Sharpening: Factory sharpened, like new
* Marks on blade: None
* Marks on handle: None
* Box: Absent
* Scabbard: -
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory
Intended Use: Sporting/Tactical
Production Type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S35VN
Blade treatment: Stonewash
Handle: Bronze-colored carbon fiber and Titanium
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 191mm.
Weight: 65g.
Closure: Framelock
Clip: Removable, stainless steel
Notes: KVT opening on ball bearings - Carson Flipper opening system - Design by SinkevichZT0460-CP -
SOG - The Tomcat knife - Large - PRIVATE COLLECTION - knife
The SOG Tomcat is one of SOG's largest folding knives. It features a 5mm thick blade, making it a heavy-duty folding knife, and while it weighs more than the average folding knife, it will withstand heavy use. The SOG Tomcat also won the "Overall Knife of the Year" award in 1988, one of the company's first awards, for its outstanding design.
It is one of the most collected SOG folding knives
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Conditions: Like new
* Commercially available: Out of production, in production between 1986 and 2002
* Sharpening: Factory
* Marks on blade: No
* Marks on the handle: No
* Box: Yes, original, in perfect condition
* Sheath: original in cordura
* Manuals, Certificates and Warranties: present in the package
* Checked and certified by our internal laboratoryIntended use: Collection
Type of production: Industrial
Production Lama: Japan
Blade: 440C stainless steel
Blade treatment: -
Handle: Stainless steel and Kraton
Blade length: 90mm.
Blade thickness: 4mm.
Closed length: 116mm.
Total length: 210mm.
Thick when closed: -
Balancing: -
Weight: 216g.
Closure: back-Lock
Clip: -
Sheath: Nylon
Packaging: Cardboard box with SOG logos
Note:AP-TOM-SOG -
Klotzli - 03-C Collection Series - Walker design - Titanium - PRIVATE COLLECTION - ATS-34 - knife
Knife withdrawn from a private collection, in like new condition with original box and certificate - Model dating back to the late 90s "made by Klotzli based on a design by the famous American designer Michael Walker. Knife that combines two qualities that are difficult to match, especially in those years; lightness and sturdiness Elegant gentleness, easy to open and close with one hand thanks to the Liner-Lock system invented by Walker himself.
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Available on the market Out of production
* Sharpening: Factory, perfect
* Marks on blade: No
* Marks on the handle: no
* Box: Present
* Sheath: in leather
* Manuals, Certificates and Warranties: Present
* Checked and certified by our internal laboratoryIntended use: sports / collection
Type of production: industrial
Country of production: Switzerland
Blade: ATS-34 stainless steel
Blade finish: Satin finish
Handle: Titanium
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 110mm.
Total length: 207mm.
Weight: 92g.
Closure: LinerLock
Clip: -
Notes: Design by Michael WalkerAP-KLO-03C -
Crusader Forge - VIS-T Tactical MK IV Titanium - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued
* Sharpening: Factory sharpened, perfect
* Marks on blade: No
* Marks on handle: Very small abrasion sengi on a couple of corners and on the clip.
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Collection/Tactical
Type of production: Midtech (semi-craft)
Country of manufacture: USA
Blade: stainless steel CPM-S30V/CF2 triple hardened 59/61HRC
Blade finish: Stone Washed
Handle: Titanium 6AL4V
Blade Length: 90mm.
Blade thickness: 5mm.
Length closed: 133mm.
Total length: 222mm.
Thickness when closed: 10.7mm.
Weight: 307g.
Closure: Frame Lock
Clip: Ttanium 6AL4V
Packaging: Cardboard box with Crusader Forge logos - certificate of guarantee and authenticity with knife data sheet
Notes: knife withdrawn from private collectionCF-VISTT-CP -
Spyderco - Manix 83mm Half Serrated - C101GPS - PRIVATE COLLECTION - knife
Knife withdrawn from private collection - model now discontinued and no longer available - 83mm blade "small" version - overall in excellent condition, shows no signs of wear or use - factory sharpening in perfect condition - no packaging - checked and certified by our in-house laboratory.
Intended Use: Sporting / EDC
Type of production: Industrial
Country of manufacture: USA
Blade: Stainless steel CPM-S30V
Blade finish: satin finish
Handle: G-10 with stainless steel liners
Blade length: 83mm.
Blade thickness: 3.5mm.
Length closed: 117mm.
Total length: 201mm.
Weight: 155g.
Closure: Back Lock
Clip: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: discontinued knife - withdrawn from private collection, overall in very good conditionC101GPS-CP -
Fantoni - Hide Fixed Premium by T. Rumici - 20Pcs. Limited Edition - PRIVATE COLLECTION - knife
Knife collected from a private collection - Never used, never taken out of its box, like new - Rare model produced by Fantoni in 2009 in a limited edition of only 20 pieces based on a design by Tommaso Rumici, one of his most famous and successful knives, still very modern and with an incredibly attractive design - Supplied with box, warranty certificate, sheath and replacement Ebony grips - Checked and certified by our in-house laboratory.
Intended Use: Collection / SportingCountry of manufacture: Italy
Type of production: industrial
Blade: stainless steel CPM-S30V 61-62HRC
Blade finish: satin-finished
Handle: made of micarta or ebony wood, interchangeable as desired (cheeks included in package)
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 170mm.
Balance: set back 1cm. from the lower guard branch
Weight: 68g.
Sheath: Made of kydex, with clip
Notes: Design by T. Rumici - Limited and numbered edition of only 20 pieces - Collected from private collection, like new.Link to the HIDE project page directly on the website of Designer Tommaso Rumici
FA-HIDE-CP20 -
Zero Tolerance - Hinderer 566 with 3 handles - ZT0566CF - PRIVATE COLLECTION - knife
Discontinued and no longer available model designed by Hinderer - Knife withdrawn from private collection, globally in excellent condition, with factory sharpening and original box - Originally with Carbon Fiber grip (included), accompanied by 2 additional aftermarket G10 grips and additional bronze-colored anodized titanium hardware - All original Zero Tolerance hardware is also included in the package - Checked and certified by our in-house laboratory.
Intended Use: Sporting/Tactical
Type of production: Industrial
Country of Production: USA
Blade: Elmax stainless steel
Blade Finish: Stonewashed
Handle: Stainless Steel and (originally) Carbon Fiber + 2 additional G10 grips
Blade Length: 82mm.
Blade thickness: 3mm.
Length closed: 113mm.
Total length: 196mm.
Thickness when closed: 12mm.
Weight: 145g.
Closure: Frame Lock
Clip: stainless steel, removable and multi-position (only on the carbon fiber gauntlet)
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - SpeedSafe opening system - Knife withdrawn from private collection equipped with 2 additional aftermarket G10 cheek pieces and custom titanium hardware, with bronze-colored anodizingCP-ZT566CF -
Spyderco - Viele - C42S - 1997 Made in Japan from PRIVATE COLLECTION - knife
Knife taken from private collection - Rare Spyderco model produced in December 1997 - Absolutely like new, with original box, never taken out of the box and never used - Checked and certified by our internal laboratory.
Intended Use: Collection/SportingProduction Type: Industrial
Country of Production: Japan
Blade: AUS-8 Stainless Steel
Handle: Micarta and Steel
Blade Length: 82mm.
Blade Thickness: 3mm.
Length closed: 114mm.
Total length: 196m.
Weight: 98g.
Closure: Liner Lock
Clip: Stainless steel
Package: original box with Spydero logos
Notes: knife made in 12/97, new, never used, with original box.SP-C42S-97 -
Master of Defense - LTT 875 Tanto knife - PRIVATE COLLECTION - folding knife
Knife withdrawn from a private collection - Rare model produced by the Master of Defense around 2005 - Excellent condition. Never resharpened - Without original box - Checked and certified by our internal laboratory Coltelleria Collini.
Master of Defense, an eclectic American brand no longer in business and later taken over by Blackhawk! Blades, produced various tactical and military type folding and fixed knives, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.
The only copy at our disposal, without box, rare and out of production for many years.
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama: USA
Blade: 154CM stainless steel - DLC
Handle: polymer with aeronautical aluminum inserts with Kraton anti-slip
Blade length: 90mm.
Blade thickness: 3.5mm.
Closed length: 130mm
Total length: 223mm.
Thick when closed: 20mm
Weight: 170g.
Closure: Button Lock
Clip: removable, in stainless steel
Packaging:MOD-LTT 875-CP -
Gerber - Spectre knife - 154cm - 06900 - PRIVATE COLLECTION - knife
Rare model produced by Gerber until 2003 - Knife taken from private collection - Overall in excellent condition, complete with original box and certificates - Checked, certified by our internal laboratory Coltelleria Collini.
Intended use: Tactical/Military
Blade: Stainless steel 154CM
Blade production USA
Handle: G10 with titanium folders
Blade length: 85mm.
Blade thickness: 3.5mm.
Length closed: 107mm.
Total length: 200mm.
Balance: -
Weight: 105g.
Closure: Liner Lock
Clip: Steel
Scabbard: -
Notes: -AP-06900 -
Al-Mar - Hunting knife - PRIVATE COLLECTION - knife
Rare knife produced by the Japanese Al-Mar around the 90s. Knife withdrawn from a private collection in like new condition - New knife with sheath and original box - Checked and certified by our in-house Coltelleria Collini laboratory.
Intended use: sports / collection
Type of production: industrial
Blade: AUS 8 stainless steel
Blade treatment: -
Lama production: Japan
Handle: micarta
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 195mm.
Weight: 117g.
Closing: -
Clip: -
Sheath: in leather
Notes: with original boxam-cp1 -
Rockstead - Shin knife - ZDP189 in SanMai - PRIVATE COLLECTION - knife
Retired from rivata collection - Rare Rockstead model produced in 2009 in SANMAI ZDP189 and ATS34 steel - the temper of this piece has reached a rare hardness of 67.4 hrc - Knife in like new condition.
Checked and certified by our internal laboratory - Collini Cutlery.
The best industrial knives currently in production are currently marketed under the Rockstead brand, of Ishida Co. of Sakai, Japan.
Created by Katsumi Kitano, who has been producing quality knives for over 20 years so as to have been awarded the highest recognition among artisan cutlers in Japan, they prove to be exceptional both in cutting capacity, penetration and edge retention and in terms of innovation for materials used and for the construction techniques.
Blade: SanMai ZDP189 and ATS-34 stainless steel at 67.4 HRC
Handle: Same (real stingray leather) and aircraft aluminum with black alumite treatment at Hv400
Blade length: 95 mm.
Blade thickness: 4 mm.
Total length: 210 mm.
Weight: 145 g.
Closure: Liner Lock in 402J2 steel at 52HRC
Clip: 402J2 to 52HRC steel
Notes: Accompanied by a guarantee certificate with technical specifications.RO-S-ZDP-CP -
Allen Elishewitz - Custom Titanium Frame Lock - PRIVATE COLLECTION - handmade knife
Collector's knife from private collection - Handcrafted in 2001 by Allen Elishewitz - Overall in good condition, original sharpening, some small signs of wear on the titanium handle and on the back of the blade - Without certificates and packaging - Checked and certified by our Collini Cutlery internal laboratory.
Intended use: Collection
Type of production: custom
Country of production: USA
Blade: handcrafted and bevelled, in CPM-154CM stainless steel
Blade treatment: hand satin finish
Handle: full scales in titanium with blue anodizing
Blade length: 82mm.
Blade thickness: 3.5mm.
Length closed: 130mm.
Total length: 184mm.
Thick when closed: 11mm.
Weight: 96g.
Closing: framelock
Clip: removable, stainless steel
Notes: Made entirely by hand by Allen ElishewitzAE-CU-CP -
We Knife Co. - Framelock Flipper knife Dual Tone Gray - PRIVATE COLLECTION - 605E - knife
Knife withdrawn from a private collection - Model discontinued by WE KNIFE - Like new condition, with original packaging - Checked, certified by our internal laboratory Collini Cutlery
Intended use: Sports / Collection
Type of production: Industrial
Country of production: China
Blade: CPM-S35VN 59 / 61HRC stainless steel
Blade treatment: dual tone, satin & black PVD
Handle: 6AL4V titanium machined with numerical control
Blade length: 77mm.
Blade thickness: 4mm.
Length closed: 101mm.
Total length: 178mm.
Weight: 114g.
Closing: Framelock
Clip: 6AL4V titanium
Packaging: cardboard box with We Knife Co. logos
Notes: Carson Flipper opening system on ceramic ball bearingsWK-605E-CP -
Max Salice Sanna - Daghetta in Damasteel damask and carbon fiber - PRIVATE COLLECTION - custom
Collector's knife from a private collection - Daghetta model made by the famous Italian knifemaker Max around the early 2000s - Like new condition - Checked and certified by our internal Collini Cutlery laboratory.
Intended use: Collection / Gentleman
Type of production: Artisan
Lama production: Italy
Blade: Damasteel 61/62 Hrc damascus steel
Blade treatment: -
Handle: damasteel damask bolster, carbon fiber with titanium liners
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 195mm.
Thick when closed: 13mm.
Balancing: -
Weight: 129g.
Closing: Liner Lock
Clip: in damasteel damask
Sheath: -
Notes: ONE PIECE - custom knife handcrafted by MaxMassimiliano Salice Sanna, called Max is a master knife maker "of the first hour", active for a quarter of a century. Specialized in the construction of folding knives, he is constantly looking for new materials and innovative techniques. Max is a master of the Italian guild of knife makers, born in 1958, a Roman by birth and a Tuscan by adoption.
MAX-DAG-CP -
Sergio Consoli - Custom Liner Lock folder - N ° 271 - PRIVATE COLLECTION - handmade knife
Intended use: Collection
Type of production: Artisan by Maestro CIC Sergio Consoli
Lama production: Italy
Blade: full-tang in RWL-34 60 / 61HRC stainless steel
Blade treatment: -
Handle: carbon fiber
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 205mm.
Thick when closed: 19mm.
Balancing: -
Weight: 138g.
Closing: Liner Lock
Clip: carbon fiber
Sheath: -
Packaging:
Notes: Handmade by Maestro Sergio Consoli - knife number 271 made in 2009Acknowledgments
I currently make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:
in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded the "best table on display"
always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"
moreover, I ranked second in the competition organized by LAME D'AUTORE magazine as the best fixed hunting blade
then in 2007 at "Scarperia" I won the third prize as the best closable
but above all again in 2007, I achieved, to my great satisfaction, the level of MASTER OF ITALIAN COLTELLINAI CORPORATION, recognition received at the first exam taken.
Presentation of the craftsman
Creating a hand knife is what I consider a real art form.
The satisfaction of seeing an object that comes from your own hands, that takes shape and that reaches mechanical, artistic and aesthetic perfection is what pays me more for all the hours of work and effort it takes to create a knife completely by hand.
The passion for "cutting irons" has always been in me since I was a child and has grown with me until the almost sudden decision to build my first knife on my own, it was a "need", almost an inner need that I couldn't put it off, my hands and my mind had to start creating, of course what I had always been passionate about ... the knife!
I started at 40, in 2003, practically self-taught, I had no manual work experience, but I had been a mechanical designer for many years and this allowed me to know perfectly the technique and all the various stages of mechanical processing.
Currently I am a member, with the rank of Maestro, which is the highest, of the Italian Knifemakers Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.
What I do now is what I consider my art form ..., to create "handmade, hunting and collectible knives".
They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
I make above all folding knives, which satisfy more my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they cannot be seen, is what distinguishes a hand-made knife from an industrially made one .
The mechanics must then be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.
Of course, over the years I have refined my technique and currently I have improved even more the mechanics by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction and with an incredible sweetness.
With regard to the blades, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow exceptional wire holding and cutting quality for all types of use.
Pathically I make all the knives on my initial design, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "handmade".
Regarding the materials that I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damask, both stainless steel and carbon, for the uniqueness 'that they donate to the knife, since each damask is always different from another.
For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of colors, all beautiful, I also use the fossil ivory of mammoth, various briars, titanium and carbon fiber.
Most of the knives, however, are made entirely of steel, in order to then be engraved, always and rigorously by hand, to transform the knife even more into a real work of art ...CON-271 -
Rockstead - Chou knife HPC Red Silk - USED - Neck Knife - Knife
Withdrawn knife from a private collection - Used, globally in good condition. Scratches on the blade - Checked, sharpened and certified by our internal laboratory Collini Cutlery.
Blade: Hitachi YXR7 65HRC steel with HPC treatment
Handle: hand-tied weave
Blade length: 45 mm.
Blade thickness: 4 mm.
Total length: 120 mm.
Weight: 60 g.
Sheath: from the neck, in Kydex
Notes: Accompanied by silk bag and warranty certificate with technical specificationsWith the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and tightness of the thread and in innovation for the materials used and for construction techniques.
RO-CHU-U -
Brian Tighe - Tac Tanto knife - craft knife
Intended use: collection
Type of production: custom
Blade production: U.S.A.
Blade: BG-42 stainless steel
Blade treatment: Satin finish
Handle: titanium and carbon fiber
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 195mm.
Thick when closed: 13mm
Balancing: -
Weight: 94g.
Closure: Liner Lock
Clip: in titanium
Sheath: -
Notes: production early 2000s, withdrawn from a private collectionBT-CUSTOM -
Spyderco - Mantra 3 Flipper - Carbon Fiber - C233CF - knife
Destination of use: Sports
Type of production: Industrial
Country of production: Taiwan
Blade: Stainless steel CPM-S30V Powder Steel
Blade treatment: Satin
Handle: Carbon Fiber
Blade length: 82mm.
Blade thickness: 3mm.
Length closed: 106mm.
Total length: 184mm.
Weight: 82g.
Locking system: Compression Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: opening by Carson Flipper system on ball bearingsC233CF -
Spyderco - Squarehead Lightweight Black - C193PBK - knife
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Taiwan
Blade: CTS-BD1 stainless steel
Blade treatment: Satin
Handle: FRN Fiberglass Reinforced Nylon with stainless steel liner
Blade length: 33mm.
Blade thickness: 3mm.
Length closed: 57mm.
Total length: 90mm.
Thick when closed: 6.8mm
Weight: 34g.
Closure: Liner Lock
Clip: -
Packaging: Cardboard box with Spyderco logos
Notes: Design by Darriel CastonC193PBK -
Spyderco - Polestar - C220GGY - knife
Intended use: Sports
Type of production: Industrial
Production Country: China
Blade: CTS-BD1 stainless steel
Blade treatment: Satin finish
Handle: Stainless steel and G-10
Blade length: 84mm.
Blade thickness: 3.2mm.
Closed Length: 115mm.
Overall length: 198mm.
Thick when closed: 16mm.
Weight: 111g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -C220GGY -
Spyderco - Spydiechef Titanium by Marcin Slysz - C211TI - knife
Intended use: Sports / Collection
Type of production: Industrial
Production Country: Taiwan
Blade: Stainless steel LC200N high corrosion resistance
Blade treatment: Stone Washed
Handle: Titanium
Blade length: 84mm.
Blade thickness: 3.0mm.
Closed Length: 113mm.
Overall length: 198mm.
Thick when closed: 12mm.
Weight: 108g.
Lock: Frame Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Marcin SlyszC211TI -
Spyderco - Slysz Bowie Titanium by Marcin Slysz - C186TI - knife
Intended use: Sports / Collection
Type of production: Industrial
Production Country: Taiwan
Blade: Stainless steel CTS-XHP
Blade treatment: Satin finish
Handle: Titanium
Blade length: 87mm.
Blade thickness: 3.5mm.
Closed Length: 111mm.
Overall length: 198mm.
Thick when closed: 12mm.
Weight: 122g.
Lock: Frame Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Marcin SlyszC186TI -
Spyderco - Rubicon 2 by Peter Carey - C187CFP2 - knife
Intended use: Tactical / EDC
Type of production: Industrial
Production Country: Taiwan
Blade: CPM-S30V stainless steel
Blade treatment: Satin finish
Handle: Carbon fiber and laminate titanium liners with G10 and G10 in orange spacer
Blade length: 77mm.
Blade thickness: 3.5mm.
Closed Length: 111mm.
Overall length: 188mm.
Thick when closed: 13mm.
Weight: 116g.
Lock: Liner Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Peter Carey - opening via Carson Flipper system on ball bearingsC187CFP2 -
Coltelleria Collini - Professional animal scissors - for thinning 7"
Scissors specially designed for animal thinning
The scissors are manufactured from high-carbon stainless steel and feature serrated blades, thus ensuring easier, more precise and longer-lasting cutting performance.
Material:420 satin-finished stainless steel
Blades:2 toothed blades
Material: polished 420 stainless steel
Blades:toothed
Blade Length: 8 cm
Total Length: 7 Inches - 18 cm
Each scissor is checked by our in-house laboratory in order to ensure a perfect cutRing colors may vary from the photos.
collini031 -
Spyderco - Yojimbo 2 by Michael Janich - C85G2 - knife
Intended use: Tactical / EDC
Type of production: Industrial
Country of Origin: USA
Blade: CPM-S30V stainless steel
Blade treatment: Satin finish
Handle: G10 liners with embedded stainless steel
Blade length: 79mm.
Blade thickness: 4mm.
Closed Length: 114mm.
Overall length: 192mm.
Thick when closed: 11mm.
Weight: 113g.
Closure: Front Lock
Clip: multi, stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Michael Janich12535 -
Spyderco - Positron by Brad Southard - C195CFP - knife
Intended use: Sports / Collection
Type of production: Industrial
Production Country: Taiwan
Blade: CPM-S30V stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber with stainless steel liners drowned
Blade length: 77mm.
Blade thickness: 3mm.
Closed Length: 101mm.
Overall length: 178mm.
Thick when closed: 13mm.
Weight: 74g.
Lock: Liner Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Brad Southard - Opening on ball bearings - opening via Carson Flipper systemC195CFP -
Spyderco - Paramilitary - Plain TiNi - C81GPBK - knife
Intended use: Sport / Collection
Type of production: Industrial
Production blade: Use
Blade: Stainless steel CPM-S30V Steel Powder
Blade treatment: Black TiNi
Handle: G10
Blade length: 81mm.
Blade thickness: 4mm.
Length closed: 121mm.
Overall length: 200mm.
Thick when closed: -
Balancing: -
Weight: 108g.
Closing: Compression Lock
Clips: stainless steel
Packaging: cardboard box with logos Spyderco
Notes: discontinued product and hard to find, very rare that you can find the version with black blade plain edge12441 -
Spyderco - Panchenko Roc Cleaver - C177GP - knife
Intended use: Sport / Collection
Type of production: Industrial
Country of production: Japan
Blade: Stainless Steel VG-10
Blade treatment: beaded blast
Handle: G10
Blade length: 78mm.
Blade thickness: 3mm.
Length closed: 119mm.
Overall length: 197mm.
Weight: 133g.
Locking system: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: Design by Serge Panchenko12414 -
Spyderco - Squarehead Titanium - C193TI - knife
Intended use: Sport / EDC
Type of production: Industrial
Country of production Taiwan
Blade: stainless steel CPM-S30V
Treatment Blade: Stonewashed
Handle: Titanium
Blade length: 33mm.
Blade thickness: 3mm.
Closed Length: 51mm.
Total length: 84mm.
Thick when closed: 4mm
Balancing: -
Weight: 31g.
Closure: Frame Lock
Clip: -
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Darriel Caston12380 -
Spyderco - Dog Tag Carbon Fiber - C188CFBBK - knife
Intended use: Sport / EDC
Type of production: Industrial
Production Country: Taiwan
Blade: stainless steel CPM-S30V
Blade treatment: Teflon
Handle: Carbon Fibre
Blade length: 31mm.
Blade thickness: 3mm.
Closed Length: 50mm.
Total length: 81mm.
Thick when closed: 4mm
Balancing: -
Weight: 26g.
Closure: Slip Joint
Clip: -
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Serge Panchenko12379 -
Spyderco - Dog Tag Folder - C188ALTIBBK - knife
Intended Use: Sport / EDC
Type of production: Industrial
Production Lama: Taiwan
Blade: stainless steel CPM-S30V
Treatment Lama: carbonitriding black
Handle: Titanium Anodized
Blade length: 31mm.
Blade thickness: 3mm.
Closed Length: 50mm.
Total length: 81mm.
Thick when closed: 4mm
Balancing: -
Weight: 25g.
Closure: Slip Joint
Clip: -
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Serge Panchenko12214BLACK -
Spyderco - Dog Tag Folder - C188ALTI - knife
Intended Use: Sport / EDC
Type of production: Industrial
Production Lama: Taiwan
Blade: stainless steel CPM-S30V
Treatment Blade: Stonewashed
Handle: Titanium Anodized
Blade length: 31mm.
Blade thickness: 3mm.
Closed Length: 50mm.
Total length: 81mm.
Thick when closed: 4mm
Balancing: -
Weight: 25g.
Closure: Slip Joint
Clip: -
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Serge Panchenko12214 -
Spyderco - Domino Carbon Fiber Flipper Opener - C172CFTI - knife
Intended Use: Sport / EDC
Type of production: Industrial
Production Blade: Taiwan
Blade: Stainless steel CTS-XHP
Treatment Blade: -
Handle: Carbon Fiber Laminate + G10 and Titanium
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 116mm.
Overall length: 195mm.
Thickness when folded: -
Balancing: -
Weight: 119g.
Lock: Frame Lock R.I.L. (Reeve Integral Lock)
Clip: Multi position and removable stainless steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Eric Glesser - Opening patented by Carson Flipper - Pivot on ball bearings - Pivot sur roulements à billes12073 -
Spyderco - Manix 2 G10 - C101GPS2 knife
Spyderco - Manix 2 G10 - C101GPS2 knife
Intended Use: Sport / EDC
Type of production: Industrial
Production Lama USA
Blade: Stainless steel 154CM
Treatment Lama: -
Handle: G-10 with stainless steel liners
Blade length: 86mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 203mm.
Thick when closed: 19mm.
Balance: -
Weight: 152g.
Closure: Ball Bearing Lock
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -C101GPS2 -
Spyderco - Shempp Navaja - C147CFP - knife
First noted in 15th century Spain among Gypsies and Gitanos, the Navaja folding knife was used for work, utility and protection. They're shaped similarly to barbering razors or novacula, meaning razor in Spanish. Modern definition categorizes it as a modified clip-point with an unsharpened concave spine swedge. Unique to the Navaja is the Carraca or ratcheting sound produced when opening or closing the blade. It announces the knife's presence and is believed to raise anxiety and anticipation, deterring criminals. Ed Schempp's modernized Navaja has a carbon fiber handle, stainless steel bolsters, pocket clip and the Carraca (ratcheting sound), maintaining the mystique of the Navaja.
Features- 4-way Clip: Tip up/down, left/right hand
- Michael Walker LinerLock
- Spine & choil jimping
- Screw-together construction
- Full-length skeletonized internal liners
- Flat-ground blade
- Carbon fiber scales with bolster
Specifications- Blade Length: 3-7/8" (98 mm)
- Cutting Edge: 3-5/32" (80 mm)
- Closed Length: 4-3/4" (121 mm)
- Overall Length: 8-5/8" (219 mm)
- Steel: CPM-S30V Premium Stainless Steel
- Weight: 4.75 oz. (135 g)
- Edge: Plain
- Made in Taiwan
C147 -
Spyderco - Translucent Blue Manix 2 - C101PBL2 knife
Spyderco - Translucent Blue Manix 2 - C101PBL2 knife
Intended Use: Sport / EDC
Type of production: Industrial
Production Lama USA
Blade: Stainless steel CTS BD-1
Treatment Lama: -
Handle: Edgetek FRCP polymer reinforced with glass fiber
Blade length: 86mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 203mm.
Thick when closed: 19mm.
Balance: -
Weight: 82g.
Closure: Ball Bearing Lock
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -C101 -
Spyderco - Caly 3.5 Carbon Fiber ZDP - C144CFPE - knife
Intended Use: sports / tactical
Type of production: industrial
Production Blade: Japan
Blade: Stainless steel with rolled edge in ZDP-189 to 67HRC and cheeks external 420J2
Treatment Lama: -
Handle: Carbon Fiber
Blade length: 86mm.
Blade Thickness: 3mm.
Closed Length: 108mm.
Total length: 194mm.
Balance: -
Weight: 88g.
Closure: Back Lock
Clips: stainless steel, removable and reversible
Sheath: -
Notes: -SC144CFPE -
Spyderco - Bob Lum Chinese Folder Glass Fiber Handle - C65CF
Intended use: Sport
Type of production: Industrial
Blade Production: Japan
Blade: Stainless steel VG-10
Treatment Blade: Tiger Stripe
Handle: Fiberglass
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 108mm.
Total length: 283mm.
Thick when closed: -
Balance: -
Weight: 86g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: Design by Bob Lum3753 -
Spyderco - Breeden Rescue Pin - C139GP coltello
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox VG-10 58HRC
Trattamento Lama: -
Produzione Lama: Japan
Manicatura: G-10
Lunghezza lama: 85mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 113mm.
Lunghezza totale: 200mm.
Bilanciatura: -
Peso: 126g.
Chiusura: Liner Lock
Clip: amovibile, multiposizione, in acciaio inox
Fodero: -
Note: design by Jason Breeden3760 -
Spyderco - Caly 3.5 - C144GP knife
Spyderco - Caly 3.5 - C144GP knife
Intended Use: sports / tactical
Type of production: industrial
Production Blade: Japan
Blade: stainless steel VG-10
Treatment Lama: -
Handle: G-10
Blade length: 87mm.
Blade Thickness: 3mm.
Length closed: 109
Total length: 193mm.
Balance: -
Weight: 90g.
Closure: Lock back
Clips: stainless steel, removable and reversible
Sheath: -
Notes: third version of the famous calypso folder3664 -
Spyderco - Jens Anso Zulu - C145GP knife
Spyderco - Jens Anso Zulu - C145GP knife
Intended Use: Sport / Collection
Type of production: Industrial
Production Blade: Taiwan
Blade: stainless steel CPM-S30V
Treatment Lama: -
Handle: G-10
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: -
Total length: 175mm.
Thick when closed: 14mm.
Balance: -
Weight: 100g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Jens Anso3756 -
Spyderco - Junior by DiAlex - C150G knife
Spyderco - Junior by DiAlex - C150G knife
Intended use: Sport
Type of production: Industrial
Blade Production: Japan
Blade: stainless steel VG-10
Treatment Lama: -
Handle: G-10
Blade length: 82mm.
Blade thickness: 3mm.
Closed Length: 103mm.
Total length: 184mm.
Thick when closed: 10mm.
Balance: -
Weight: 82g.
Closure: Compression Lock
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by DiAlex3797 -
Spyderco - Kuhkri by Ed Schempp - coltello
Destinazione d'uso: sportivo/tattico
Tipo di produzione: industriale
Produzione Lama: Giappone
Lama: in acciaio inox VG-10
Manicatura: G10
Lunghezza lama: 85mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 110
Lunghezza totale: 195mm.
Bilanciatura: -
Peso: 92g.
Chiusura: liner Lock
Clip: in acciaio inox, amovibile e reversibile
Note: disegnato da Ed Schempp3728 -
Spyderco - Ladybug Stainless Steel - LSSP3
Destinazione d'uso: Sportivo/EDC
Tipo di produzione: Industriale
Produzione Lama: Japan
Lama: in acciaio inox VG-10
Trattamento Lama: -
Manicatura: acciaio inox
Lunghezza lama: 49mm.
Spessore lama: 2mm.
Lunghezza chiuso: 62mm.
Lunghezza totale: 111mm.
Spessore da chiuso: 8mm.
Bilanciatura: -
Peso: 36g.
Chiusura: Back Lock
Clip: -
Fodero: -
Confezione: astuccio di cartone con loghi Spyderco
Note: -3759 -
Spyderco - Manix 2 G10 - C101GS2 knife
Intended Use: Sport / EDC
Type of production: Industrial
Production Lama USA
Blade: Stainless steel 154CM
Treatment Lama: -
Handle: G-10 with stainless steel liners
Blade length: 86mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 203mm.
Thick when closed: 19mm.
Balance: -
Weight: 152g.
Closure: Ball Bearing Lock
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -3745 -
Spyderco - Manix 2 G10 Black - C101GPBBK2 coltello
Destinazione d'uso: Sportivo / EDC
Tipo di produzione: Industriale
Produzione Lama: USA
Lama: In acciaio inox CPM S30 Nera
Trattamento Lama: DLC (Diamond Like Coated)
Manicatura: G-10 con liners in acciaio inox
Lunghezza lama: 86mm.
Spessore lama: 3mm.
Lunghezza chiuso: 117mm.
Lunghezza totale: 203mm.
Spessore da chiuso: 19mm.
Bilanciatura: -
Peso: 152g.
Chiusura: Ball Bearing Lock
Clip: in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Spyderco
Note: -3793 -
Spyderco - Moran Drop Point Black - coltello
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox VG-10 58HRC
Trattamento Lama: BodyCote nero
Produzione Lama: Japan
Manicatura: kraton
Lunghezza lama: 85mm.
Spessore della lama: 3mm.
Lunghezza totale: 205mm.
Bilanciatura: sul ramo di guardia
Peso: 84g.
Fodero: kydex
Note: design by Bill Moran3761 -
Spyderco - R Nishijin Limited Sprint Run - C67GFP - coltello
Destinazione d'uso: Sportivo/Collezione
Tipo di produzione: Industriale
Produzione Lama: Giappone
Lama: in acciaio VG10
Trattamento Lama: -
Manicatura: Fibra di vetro
Lunghezza lama: 88mm.
Spessore lama: 3mm.
Lunghezza chiuso: 118mm.
Lunghezza totale: 205mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 119g.
Chiusura: Back Lock
Clip: Acciaio Inox
Fodero: -
Confezione: Scatola di cartone con loghi Spyderco
Note: Tiratura Limitata3804 -
Spyderco - Stretch Plain FRN - C90PBK coltello
Destinazione d'uso: Sportivo / EDC
Tipo di produzione: Industriale
Produzione Lama: Japan
Lama: In acciaio inox VG-10
Trattamento Lama: -
Manicatura: FRN con liners in acciaio inox
Lunghezza lama: 89mm.
Spessore lama: 3mm.
Lunghezza chiuso: 114mm.
Lunghezza totale: 201mm.
Spessore da chiuso: 16mm.
Bilanciatura: -
Peso: 96g.
Chiusura: Back Lock
Clip: in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Spyderco
Note: -3739 -
Spyderco - SuperLeaf Pin - C140GP - coltello
Destinazione d'uso: Sportivo
Tipo di produzione: Industriale
Produzione Lama: Giappone
Lama: in acciaio inox VG-10
Trattamento Lama: -
Manicatura: G-10
Lunghezza lama: 87mm.
Spessore lama: 4mm.
Lunghezza chiuso: 119mm.
Lunghezza totale: 202mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 140g.
Chiusura: Compression Lock
Clip: Acciaio Inox
Fodero: -
Confezione: Scatola di cartone con loghi Spyderco
Note: -3805 -
Spyderco - Tenacious Combo - SC122GPS - knife
Intended Use: Sports
Type of production: Industrial
Blade production: China
Blade: Stainless steel 8Cr13MoV
Blade Treatment: -
Handle: Stainless steel and G-10
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thickness when closed: 16mm.
Balance: -
Weight: 116g.
Closure: Liner Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: Cardboard box with Spyderco logos
Notes: -C122GPS -
Spyderco - Balance Pin - C141CFP coltello
Destinazione d'uso: EDC
Tipo di produzione: Industriale
Produzione Lama: Japan
Lama: in acciaio inox VG-10
Trattamento Lama: -
Manicatura: Fibra di Carbonio
Lunghezza lama: 45mm.
Spessore lama: 3mm.
Lunghezza chiuso: 67mm.
Lunghezza totale: 112mm.
Spessore da chiuso: 9mm.
Bilanciatura: -
Peso: 40g.
Chiusura: Liner Lock
Clip: Acciaio inox
Fodero: -
Confezione: Scatola di cartone con loghi Spyderco
Note: Design by Ed Schempp3758