Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Laguiole En Aubrac - raw buffalo horn - knife
Destination: French regional collector's knife
Blade: Swedish stainless steel 12C27 to 54HRC brut de forge.
Handle: raw buffalo
Blade length: 90 mm.
Blade thickness: 2.5 mm.
Total length: 220 mm.
Weight: 72 g.
Folders: Stainless Steel
Heads: Absent
Closure: Retention spring in brushed stainless steel
Clip: Absent
Sheath: AbsentL0512CBI/FSI1 -
Laguiole En Aubrac - Capucin carbon and bronze - 8cm - collection knife
Intended use: Sports / collection
Type of production: Industrial
Production Lama: France
Blade: 12C27 stainless steel
Blade treatment: satin
Handle: carbon fiber and copper
Blade length: 77mm.
Blade thickness: 2.5mm.
Closed length: 100mm.
Total length: 177mm.
Thick when closed: 20mm.
Balancing: -
Weight: 47g.
Closing: -
Clip: -
Sheath: -
Packaging: -
Note: -L0510CCBI -
Laguiole En Aubrac - Hunteing knife - Ebony - L0514EBI - knife
These high quality knives, are handcrafted in the tradition of French Thiers cutlery.
This large, perfectly balanced Laguiole hunting knife was made entirely by hand in Laguiole, by a master blacksmith, according to the strict LOG (Laguiole Origine Garantie) quality criteria. Depending on the version, it requires from 109 to 216 working steps.
The blade has a very balanced geometry proven over many decades: it is 11 cm long, 3 cm high and 4 mm thick. Both the bee and the area above the ricasso can be used as a thumb rest.
The blade is ground on both sides to about 22 degrees to the cutting edge (flat grind), so that optimal breaking and scoring is guaranteed and, at the same time, the edge does not round off too quickly.
The handle scales are polished to a high shine with seven different oils and high quality wax pastes on large felt discs.
The left handle bears the traditional shepherd's cross (French: croix du berger) as decoration.
Intended Use: Regional/Collection/Outdoor/Hunting
Type of production: handcrafted
Blade: Swedish 12C27 stainless steel at 54HRC satin finish.
Blade Production: France
Handle: Ebony
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 138mm.
Total length: 240mm.
Balance: -
Weight: 180g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -L0514EBI -
Midgards Messer - Locking Valhalla folding knife - PRIVATE COLLECTION - knife
Knife from a private collection
* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production, limited edition to 150 pieces
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box:
* Sheath:
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratoryIntended use: Collection / Survival
Type of production: industrial
Blade: CPM D2 steel
Country of production: Germany
Handle: in G10
Blade length: 140mm.
Blade thickness: 4.8mm.
Total length: 310mm.
Weight: 520g.
Sheath: -
Notes: patented "knee" closure system made in ItalyAP-MDM015 -
Carl Schlieper - Survival Companion Knife - Vintage - PRIVATE COLLECTION - knife
Knife from a private collection - presumably produced in the early 1980s - overall in excellent condition, with factory sharpening - accompanied by original leather sheath - checked and certified by our in-house laboratory.
* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production, difficult to find, dating back to the 80s
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box:-
* Sheath: in leather
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratoryCarl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid in Germany. Products included freehand knives, tools and razors. A branch of the company in Solingen was engaged in the production of knives including slipjoint, automatic knives, daggers, machetes, bowie, razors and kitchen knives. Over the years various brands and 22 patents held by the company have been created and thousands of pieces sold worldwide. Carl Schlieper was liquidated for bankruptcy in 1993. The production of the brand was subsequently acquired by Freidrich Olbertz in Solingen.
Intended use: Collection / Survival
Type of production: industrial
Blade: 440A Ice Tempered stainless steel
Country of production: Germany
Handle: brass, coated with synthetic material, hollow inside (useful space approx. 50mm. X 14mm.) With screw cap
Blade length: 185mm. (length of serration on the back 95mm.)
Blade thickness: 4.8mm.
Total length: 304mm.
Balancing: on the guard
Weight: 400g.
Sheath: in leather, with pocket containing a sharpening stone
Notes: knife from the early 1980s, from a private collection, overall in excellent conditionCS-SCK-CP-1 -
Carl Schlieper - Vintage Survival Companion Bowie - PRIVATE COLLECTION - knife
Knife from a private collection - presumably produced in the early 1980s - overall in excellent condition, with factory sharpening - accompanied by original leather sheath - checked and certified by our in-house laboratory.
Carl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid, Germany. Products included knives, tools and freehand razors. A branch of the company in Solingen was involved in the production of knives including slipjoint, automatic knives, daggers, machetes, bowies, razors, and kitchen knives. Over the years, several trademarks were created and 22 patents held by the company and millions of pieces sold worldwide. Carl Schlieper was liquidated by bankruptcy in 1993. Production of the brand was later acquired by Freidrich Olbertz in Solingen.
Intended use: Collection/Survival
Type of production: industrial
Blade: stainless steel 440A Ice Tempered
Country of manufacture: Germany
Handle: brass, synthetic coated, hollow inside (usable space approx. 50mm. x 14mm.) with screw cap
Blade length: 185mm. (serrated length on back 95mm.)
Blade thickness: 4.8mm.
Total length: 304mm.
Balance: on the guard
Weight: 400g.
Sheath: leather, with pocket containing a sharpening stone
Notes: knife from the early 1980s, from a private collection, overall in very good conditionCS-SCK-CP -
Laguiole En Aubrac - Mandailles knife - Buffalo horn - knife
A handmade Laguiole en Aubrac knife made by a master craftsman from the region of origin of Laguiole. Extremely precise in its manufacture, it is decorated with the shepherd's cross on the handle. This cross allowed those who left during the long months of the transhumance to say their prayers once the knife was stuck in the bread.
Destination: French regional collector's knife
Blade: Swedish stainless steel 12C27 to 54HRC brut de forge.
Handle: buffalo
Blade length: 90 mm.
Blade thickness: 2.5 mm.
Total length: 220 mm.
Weight: 68 g.
Folders: Stainless Steel
Heads: Absent
Closure: Retention spring in brushed stainless steel
Clip: Absent
Sheath: AbsentL0512BUMIF -
Carl Schlieper - Survival Companion Knife - Vintage knife
Carl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid, Germany. Products included knives, tools and freehand razors. A branch of the company in Solingen was responsible for the production of knives including slipjoint, automatic knives, daggers, machetes, bowies, razors and kitchen knives. Over the years, several trademarks were created and 22 patents held by the company and millions of pieces sold worldwide. Carl Schlieper was liquidated through bankruptcy in 1993. Production of the brand was subsequently taken over by Freidrich Olbertz in Solingen.
Survival knife produced in Germany since the 1970s.
Intended use: Collection/Survival
Type of production: industrial
Blade: ICE TEMPERED stainless steel, PVD coated
Country of production: Germany
Handle: brass coated with synthetic material, hollow inside (usable space approx. 50mm. x 14mm.) with screw cap with o-ring
Blade length: 185mm. (serrated length on back 95mm.)
Blade thickness: 4.8mm.
Total length: 304mm.
Balance: on the guard
Weight: 401g. (609G. scabbard included)
Scabbard: leather, with pocket containing a sharpening stone
Notes: original cardboard boxTranslated with www.DeepL.com/Translator (free version)
CS-SUR-COMP -
Laguiole En Aubrac - Laguiole bovine horn tip 12cm - collection knife
Laguiole, which can be defined as the "capital" of the Aubrac, is a small town of about 900 inhabitants that became known all over the world for the traditional Laguiole knife.
The Laguiole knife, also known as a knife-corkscrew, loved by the best sommeliers in the world, is said to have evolved from the one used daily by the people of the region since the fourteenth century. It is said that they received it from their parents on the occasion of the First Communion, and used it with love for life as a friend, and as an "amulet".
The Laguiole knife refers to an older model called capuchadou, which the Aubrac breeders used every day since the fourteenth century. The farmers brought it with them, hung on their belts and used it to work wood, or to cut bread and cheese. It is said that, at the end of the working day, they put it on the ground, like a cross, to offer their evening prayer.
The current Laguiole knife, has its prototype in the one designed by Pierre-Jean Calmels, at the beginning of the nineteenth century. At the time, many Catalans lived in this region, used for deforestation or other jobs. They used a clasp knife, a curved blade called a navaja, and Calmels created a beautiful and functional instrument, fusing the traditional navaja and Laguiole knife, heir to the capuchadou. Still today, keeping the tradition, each Laguiole En Aubrac knife is handcrafted by Laguiole's artisans.
Intended use: Collection / SportsType of production: Artisan
Country of production: Laguiole, France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Mirror polished
Handle: Tip of bovine horn
Blade length: 112mm.
Blade thickness: 3mm.
Length closed: 143mm.
Total length: 255mm.
Weight: 80g.
Opening: manual, two-handed
Closure: simple spring
Clip: -
Sheath: -
Notes: always accompany the blade during closing to prevent the thread from beating and ruiningL0514BUI-FSI1 -
Laguiole En Aubrac - Fidelis Ebène - regional knife
The "Fidelis" was born from the desire to pay homage to the "medieval Larzac", with its old Templar villages and legends.
It is a knife that symbolizes the roughness of this land, the rusticity of its vegetation and its climate, but also the nobility of women and men who have worked, modeled, guarded and inserted into this object a soul.
Made in Millau, in the heart of Aveyron, in the cutlery workshops "L'ame du Causse", it is worked with noble materials, such as the precious wood of ebony that the Knights Templars have brought back to their return. Its "sage leaf" blade, made of 12C27 steel, renowned for its cutting quality and ease of maintenance, will be a guarantee of longevity. The "Fidelis" will be your ideal companion to share moments of everyday life full of history.Intended use: Regional
Type of production: Industrial
Country of production: France
Blade: 12C27 stainless steel
Blade treatment: Satin
Handle: Ebony wood
Blade length: 85mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 195mm.
Weight: 54g.
Opening: manual, two-handed
Closure: upper safety ring
Packaging: cardboard case
Note: -2996F -
Laguiole en Aubrac - Carbon fiber with SanMai blade - knife
Intended Use: Regional / Collection
Type of production: Hand
Blade: sanmai steel with sharp VG10 burnished and damask cheeks to 32 layers
Production Country: France
Handle: Carbon fiber with aluminum liners
Blade length: 100mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 220mm.
Weight: 70g.
Closure: retaining spring
Clip: absent
Sheath: absent
Notes: -au-carbon -
Laguiole En Aubrac - Horn of Buffalo - knife collection
Laguiole En Aubrac - Horn of Buffalo - knife collection Destination : Knife regional French collector Blade: 12C27 Swedish stainless steel in 54HRC brut de forge. Handle: Buffalo Blade length: 90 mm. Blade Thickness: 2.5 mm . Overall length : 220 mm . Weight: 68 g . Folders : Stainless steel brushed Heads : Absent Closure : Spring retention in satin stainless steel Clip: None Sheath: None
lag-buffle -
Laguiole En Aubrac - Buffalo horn with sanmai Japanese blade - knife collection
Laguiole En Aubrac - Buffalo horn with sanmai Japanese blade - knife collection
Intended Use: Regional / Collection
Type of production: craft
Blade: damascus steel and laminated VG10 Japanese
Production Lama: France
Handle: Buffalo Horn
Blade length: 100mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 220mm.
Balancing: -
Weight: 90g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: -L0212BUI -
Laguiole en Aubrac - Bone with double blosters carbon - knife collection
Laguiole en Aubrac - Bone with double blosters carbon - knife collection
Intended Use: Regional / Collection
Type of production: craft
Blade: Stainless steel 12C27
Production Blade: France
Handle: double blosters bone with carbon black and white
Blade length: 100mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 220mm.
Balancing: -
Weight: 74g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: -L0212BUEF -
En Aubrac Laguiole - Laguiole d'autrefois in horn tip - knife collection
En Aubrac Laguiole - Laguiole d'autrefois in horn tip - knife collection
Intended use: Collection / Sports
Type of production: craft
Blade: Stainless steel 12C27
Production Blade: France
Handle: Horn Cattle Blonde
Blade length: 112mm.
Blade Thickness: 3mm.
Closed Length: 143mm.
Overall length: 255mm.
Balancing: -
Weight: 80g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: accompanied by presentation box and bag in cotton with logo Laguiole en AubracL0214CPIF -
Laguiole en Aubrac - Double Head - Ebony Wood - knife collection
Laguiole en Aubrac - Double Head - Ebony Wood - knife collection
Intended Use: Regional / Collection
Type of production: craft
Blade: Stainless steel 12C27
Production Blade: France
Handle: ebony
Blade length: 100mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 220mm.
Balancing: -
Weight: 110g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: -aubrac-ebano -
Laguiole En Aubrac - Horn Classic 11 cm - Knife
Laguiole En Aubrac - Horn Classic 11 cm - Knife
Intended use: Collection / Sports
Type of production: handmade
Blade: Stainless steel 12C27
Production Blade: France
Handle: Horn Cattle
Blade length: 105mm.
Blade Thickness: 3mm.
Closed Length: 130mm.
Total length: 240mm.
Balance: -
Weight: 106g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: accompanied by presentation box and bag in cotton with logo Laguiole En Aubrac10279 -
Laguiole En Aubrac - Horn Classic - knife
Laguiole En Aubrac - Horn Classic - knife
Intended use: Collection / Sports
Type of production: handmade
Blade: Stainless steel 12C27
Production Blade: France
Handle: Horn Cattle
Blade length: 90mm.
Blade Thickness: 3mm.
Closed Length: 110mm.
Total length: 200mm.
Balance: -
Weight: 72g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: accompanied by presentation box and bag in cotton with logo Laguiole En AubracL0212PCI-1 -
Laguiole En Aubrac - Buffalo and blade Brut de forge knife - lily spring - knife
Laguiole En Aubrac - Buffalo Brut de forge and knife - knife
Destination: Knife regional French collector
Blade: Swedish stainless steel 12C27 to 54HRC brut de forge.
Handle: Buffalo
Blade length: 90 mm.
Blade Thickness: 2.5 mm.
Total length: 220 mm.
Weight: 68 g.
Folders: Stainless steel satin
Heads: Absent
Closure: Spring retention in satin stainless steel
Clip: None
Sheath: None10472 -
Laguiole en Aubrac - buffalo horn insignia with hammer and blade sanmai - knife collection
Laguiole en Aubrac - buffalo horn insignia with hammer and blade sanmai - knife collection
Type of production: crafts
Blade: rolled steel damask and Japanese VG10
Production Lama France
Handle: buffalo horn with insignia hammered
Blade length: 100mm.
Blade Thickness: 3mm.
Length closed: 120mm.
Overall length: 220mm.
Balancing: -
Weight: 106g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: -LA2991 -
Laguiole En Aubrac - Carbonio e Avorio 2 Placche knife - coltello regionale
Destinazione d'uso: Regionale/Collezione
Tipo di produzione: Semi-Industriale
Produzione Lama: Francia
Lama: In acciaio inox 12C27
Trattamento Lama: -
Manicatura: Avorio e Fibra di Carbonio
Lunghezza lama: 100mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 120mm.
Lunghezza totale: 220mm.
Peso: 88g.
Chiusura: Spring Lock
Clip: -
Fodero: -
Note: -2995-2 -
Laguiole En Aubrac - ivory and carbon with 5 plates - traditional knife
Laguiole, which can be defined as the "capital" of the Aubrac, is a small town of about 900 inhabitants that became known all over the world for the traditional Laguiole knife.
The Laguiole knife, also known as a knife-corkscrew, loved by the best sommeliers in the world, is said to have evolved from the one used daily by the people of the region since the fourteenth century. It is said that they received it from their parents on the occasion of the First Communion, and used it with love for life as a friend, and as an "amulet".
The Laguiole knife refers to an older model called capuchadou, which the Aubrac breeders used every day since the fourteenth century. The farmers brought it with them, hung on their belts and used it to work wood, or to cut bread and cheese. It is said that, at the end of the working day, they put it on the ground, like a cross, to offer their evening prayer.
The current Laguiole knife, has its prototype in the one designed by Pierre-Jean Calmels, at the beginning of the nineteenth century. At the time, many Catalans lived in this region, used for deforestation or other jobs. They used a clasp knife, a curved blade called a navaja, and Calmels created a beautiful and functional instrument, fusing the traditional navaja and Laguiole knife, heir to the capuchadou. Still today, keeping the tradition, each Laguiole En Aubrac knife is handcrafted by Laguiole's artisans.
Intended use: Collection / SportsType of production: Artisan
Country of production: Laguiole, France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Polished
Handle: fossil ivory and carbon fiber
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Weight: 68g.
Opening: manual, two-handed
Closure: simple spring
Clip: -
Sheath: -
Notes: always accompany the blade during closing to prevent the thread from beating and ruining2995-4 -
Laguiole En Aubrac - Laiton - Horn - collector's knife
ATTENTION: as this is a handmade product, the external appearance (colors, finishes, etc.) differs from the photographed piece.
Intended use: Regional / Collection
Type of production: artisanal
Blade: 12C27 stainless steel
Lama production: France
Handle: Cattle Horn
Blade length: 100mm.
Blade thickness: 2.5mm.
Closed length: 120mm.
Total length: 220mm.
Balancing: -
Weight: 92g.
Closure: rear retention springk
Clip: -
Sheath: -
Notes: rear corkscrew2539