Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: -
* Scabbard: Present - Original
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory.



The SEAL Team 2000 was designed in collaboration with the Navy SEALs themselves to meet their specific needs in the field. It was introduced in 2001 and quickly became a popular knife among law enforcement professionals, military personnel and tactical knife enthusiasts.

The SOG SEAL Team 2000 Knife was created to withstand the most extreme conditions and challenges in the field, making it a reliable tool for those operating in tactical environments. Its popularity has grown over time due to its reputation as a quality knife built to last and adapt to a variety of situations.



Intended Use: Sporting/Collection

Type of production: Industrial
Blade production: Japan
Blade: AUS-6 stainless steel
Blade Finish: Powder coated
Handle: Zytel
Blade length: 180mm.
Blade thickness: 6mm.
Total length: 315mm.
Balance: on the guard branch
Weight: 359g.
Sheath: made of kydex

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available No
* Sharpening: Original
* Marks on blade: NO
* Markings on handle: NO
* Packaging: NO
* Sheath: In leather, handcrafted
* Manuals, Certificates and Warranties: YES
* Checked and Certified by our internal laboratory

Knife handcrafted by Master C.IC. (Italian Corporation of Cutlers) Livio Montagna.

Type of production: artisanal
Country of production: Italy
Blade: M390 steel at 60/61 HRC
Blade finish: satin finish
Handle: in stabilized beech wood
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 215mm.
Weight: 185g.
Sheath: handmade, in leather, hand-stitched
Packaging: NO
Note: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: knife from 2014 previously purchased and used.
* Condition: Overall in good condition.
* Commercially available Out of production.
* Sharpening: Professionally re-sharpened.
* Marks on blade: Slight superficial rub marks on matte finish.
* Marks on handle: Small superficial marks on pommel and guard.
* Box: Not present
* Scabbard: Present, original, fiberglass, nylon and cordura sheath with stainless steel thread cutter.
* Manuals, Certificates and Warranties: Not present
* Checked and Certified by our in-house laboratory



Knife launched on the market in 2014 by Fox Knives, civilian version of their Spartan Defender Military Bayonet. It has the distinction of having a trapezoidal polymer handle with the blade offset upward from the user's grip. Model now discontinued and replaced by the "Spartan 2 Leonidas" currently in production, decidedly more canonical in appearance, conformation and materials.

Intended Use: Collection / All Round Utility / Tactical

Country of Production: Italy
Blade: Stainless Steel N690Co 59/60HRC with MILSPEC MIL-C-13924 treatment
Handle: NATO Black 9011 forprene and 316L stainless steel with MILSPEC MIL-C-13927 treatment
Blade length: 185mm.
Blade thickness: 6mm.
Total length: 315mm.
Balance: On the lower guard branch
Weight: 390g.
Sheath: made of high-strength fiberglass with Cordura and ballistic Nylon exterior. The main sheath is equipped with a wire cutter plate.
Notes: knife from 2014 previously purchased and from private collection - discontinued item

KNIFE FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No
* Sharpening: Original
* Marks on blade: NO
* Marks on handle: NO
* Packaging: NO
* Scabbard: Leather, handcrafted, original with some marks due to age and storage
* Manuals, Certificates and Warranties: YES
* Checked and Certified by our in-house laboratory

Knife handcrafted by Master C.IC. (Corporazione Italiana Coltellinai - Italian Knife-makers Guild) Livio Montagna. Excellent reproduction of one of the most iconic knives ever: the classic Bowie. A knife created by Rezin Bowie in the early 19th century for his brother Jim Bowie, the famous American pioneer whose rather reckless life is now shrouded in legend.

Livio Montagna's excellent craftsmanship does justice to this piece of history with its classic and timeless stylistic features: the double guard, the clip point blade, the handle in natural material.

Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: steel 440C tempered at 59/60 HRC
Blade finish: satin finish
Handle: Deer and Buffalo - brass guard and pommel
Blade length: 197mm.
Blade thickness: 5.7mm.
Total length: 314mm.
Weight: 497g. (666g. including scabbard)
Sheath: Handcrafted, leather, hand-stitched
Packaging: NO
Notes: -

KNIFE FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Good
* Commercially available No
* Sharpening: Original
* Marks on the blade: Some scratches on the pommel, blade and guard in very good condition
* Marks on handle: Some assembly inaccuracies near the pommel, adhesive residues
* Packaging: NO
* Scabbard: Leather, handcrafted, original with some marks due to age and storage
* Manuals, Certificates and Warranties: YES
* Checked and certified by our in-house laboratory

Knife handcrafted by Master C.IC. (Corporazione Italiana Coltellinai - Italian Knife-makers Guild) Livio Montagna. Reproduction of one of the various versions of the Arkansas Toothpick, legendary frontier knife of the American 1800s. Famous, often infamous, it generally has a 30 to 50 cm blade, rather narrow and sometimes symmetrical, dagger-style. Used mainly for hunting and personal defence.

Livio Montagna's version is aesthetically very similar to the Toothpick used in Expandables 2.

The knife is distinguished by an excellent overall balance, allowing control and precision in use. The finish is of a good standard.

Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: hardened 440C steel at 58/59 HRC
Blade finish: satin finish
Handle: Ebony - 416 stainless steel guard and pommel
Blade length: 305mm.
Blade thickness: 6mm.
Total length: 445mm.
Weight: 722g. (960g. including scabbard)
Sheath: Handcrafted, leather, hand-stitched
Packaging: NO
Notes: -

Intended Use: Survival / Utlity / Collection

Production type: Industrial
Country of manufacture: Italy
Blade: Japanese rolled steel (San Mai) with V-Toku2 (carbon) cutting edge at 62/63HRC and SUS410 (stainless) outer cheeks
Blade treatment: Satin finish
Handle: Forprene
Blade length: 175mm.
Blade thickness: 6mm.
Total length: 300mm.
Weight: 365g.
Sheath: nylon, M.O.L.L.E. compatible.
Packaging: cardboard box with Fox logos
Notes: -

Japanese steel merges with Italian excellence.

For this new collaboration, between Coltelleria Collini of Busto Arsizio and Fox of Maniago, we chose the Rimor model. Only 9 exclusive pieces of this excellent bushcraft knife produced by Fox of Maniago have been made, using for this edition the Japanese V-Toku2 steel in 5mm Sanmai produced by the Japanese Takefu Steel instead of the Niolox used in the standard model. 

Specifically, the central sheet is the carbonaceous V-Toku2 at 62/63HRC and on the outer cheeks there is the stainless SUS410, so as to ensure not only a beautiful aesthetic effect, but also a very high cutting capacity, penetration and edge retention along with easy resharpening and maintenance. At the same time, the blade has remarkable corrosion resistance and an important increase in resilience given by the type of extreme steel and laminated structure.

Intended Use: Survival / Utlity / Collection

Production type: Industrial
Country of manufacture: Italy
Blade: Japanese rolled steel (San Mai) with V-Toku2 (carbon) cutting edge at 62/63HRC and SUS410 (stainless steel) outer cheeks
Blade treatment: Satin finish
Handle: Forprene
Blade length: 175mm.
Blade thickness: 6mm.
Total length: 300mm.
Weight: 365g.
Sheath: Nylon, M.O.L.E. compatible.
Packaging: cardboard box with Fox logos
Notes: -

Japanese steel merges with Italian excellence

For this new collaboration between Coltelleria Collini of Busto Arsizio and Fox of Maniago, we have chosen the Rimor model. Only 9 exclusive pieces of this excellent bushcraft knife produced by Fox of Maniago have been made, using for this edition the 5 mm Sanmai V-Toku2 steel produced by the Japanese Takefu Steel instead of the Niolox used in the standard model.

Specifically, the central plate is the carbonaceous V-Toku2 at 62/63HRC and on the outer cheeks there is the stainless SUS410, so as to guarantee not only a beautiful aesthetic effect, but also a very high cutting capacity, penetration and edge-holding capacity together with easy resharpening and maintenance. At the same time, the blade has a remarkable resistance to corrosion and an important increase in resilience due to the extreme steel type and rolled structure.

Translated with www.DeepL.com/Translator (free version)

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Not present
* Scabbard: Original, like new
* Manuals, Certificates and Warranties: Not present
* Checked and Certified by our in-house laboratory


Intended Use: Tactical / Allround Utility

Production type: Industrial
Country of Production: Taiwan
Blade: D2 57/59HRC carbon steel
Blade Finish: Blackwashed
Handle: G10
Blade length: 148mm.
Blade thickness: 6mm.
Total length: 285mm.
Balance: slightly backward
Weight: 433g.
Sheath: made of kydex, with Tek-Lok type attachment
Packaging: -
Notes: previously purchased knife, from private collection

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Typology: withdrawn by private individual
* Condition: in excellent condition
* Available on the market: discontinued since 2015
* Sharpening: factory sharpening
* Marks on the blade: small marks on the tip caused by the extraction from the sheath
* Marks on the handle: no marks
* Box: original Fox box
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory Coltelleria Collini

ST3-F is a knife studied and designed by the head instructor Paolo Bozzo of TEAM SURVIVAL (survival and survival school).
This project was developed through years of direct experience in the field.

Intended use: Survival / Utlity

Type of production: Industrial
Production Lama: Italy
Blade: N690Co stainless steel
Blade treatment: Black Teflon
Handle: Green Canvas Micarta
Blade length: 220mm.
Blade thickness: 6mm.
Total length: 360mm.
Balance: Advanced to 2.5cm. from the guard branch
Weight: 552g.
Sheath: in cordura with molle attachments
Packaging: cardboard box with Fox logos
Notes: designed by Paolo Bozzo

Knife withdrawn from private collection - Unobtainable specimen, now out of production - Like new, perfect, undamaged, never taken out of the box - Complete with every certificate - Perfect original factory sharpening - Absolutely flawless specimen - Checked and certified by our in-house laboratory

Intended Use: Fighter / Tactical / Collection

Type of manufacture: Midtech
Blade: stainless steel CPM-S30V 55/57HRC
Country of Production: USA
Handle: Canvas Micarta
Blade length: 170mm.
Blade thickness: 5.8mm.
Total length: 290mm.
Balance: set back 1cm. from the lower guard branch
Weight: 356g.
Sheath: by SpecOps, cordura
Notes: Discontinued and unobtainable specimen - withdrawn from private collection - New, intact, perfect, never used, with original box and warranty certificates

Famous knife produced by Gerber and dating from around the 1980s, discontinued in 1999. Version with 8 teeth serration on the back. Knife taken from a private collection: very good condition. Without cardboard box. Checked by our in-house laboratory Coltelleria Collini

Intended use: Military

Type of production: industrial
Blade: AUS-8 stainless steel
Blade treatment: micro-peening
Country of manufacture: USA
Handle: Hypalon
Blade length: 200mm. (edge length 175mm.)
Blade thickness: 6mm.
Total length: 342mm.
Balance: on the guard
Weight: 433g. (775g. including scabbard)
Notes: Serial number 006282 - In the pocket on the scabbard is the original compass - NO BOX
Scabbard: ABS and Cordura

Translated with www.DeepL.com/Translator (free version)

Knife out of production and no longer available, from a private collection, previously used, re-sharpened and with signs of wear on the finish of the blade and the sheath - Overall in good condition, previously used, still has a very good sharpness and shows some signs of wear on the finish of the blade - Handle in perfect condition - The sheath shows visible signs of wear but does not affect in any way the functionality, use or portability - Accompanied by original cardboard box - Checked and guaranteed by our internal laboratory.

Intended Use: Tactical / Hiking

Type of production: industrial
Blade: Stainless steel N690Co 58/60HRC
Country of production: Italy
Handle: in forprene, removable
Blade length: 220mm.
Blade thickness: 6mm.
Total length: 357mm.
Balance: advanced, at 45mm from the lower guard branch
Weight: 380g.
Sheath: Cordura 1000D OD Green, MOLLE compatible
Notes: Foxionic surface treatment at 72/75HRC

Famous Gerber knife dating back to the 80s and discontinued in 1999 - Knife withdrawn from a private collection in like new condition - without cardboard box. Checked, sharpened and certified by our in-house Coltelleria Collini laboratory

Intended use: Military

Type of production: industrial
Blade: AUS-8 stainless steel
Blade treatment: Hypalon
Production Lama: USA
Handle: Hypalon
Blade length: 220mm.
Blade thickness: 6mm.
Total length: 372mm.
Balancing: on the guard
Weight: 465g.
Notes: serial number 045552
Sheath: in ABS and cordura

USED KNIFE, TAKEN FROM PRIVATE COLLECTION
* Type: Previously purchased and used
* Condition: In good overall condition (see accompanying photos)
* Commercially available 
* Sharpening: Resharpened by our workshop, also clean oxidation which has affected some portions of the edge, which is however back in working order
* Marks on blade: YES
* Marks on handle: YES, various superficial oxidation stains
* Box: Present and original, in cardboard
* Scabbard: in good condition
* Manuals, Certificates and Warranties: -
* Checked and certified by our in-house laboratory

Intended use: Hunting / Outdoor

Production type: Industrial
Blade production: Taiwan
Blade: Stainless steel 440C differentiated hardening 58/45HRC
Blade Treatment: Mirror polished
Handle: Brass, ebony wood and leather rings
Blade length: 280mm.
Blade thickness: 6mm.
Total length: 405mm.
Weight: 800g.
Scabbard: Leather
Packaging: Cardboard box
Notes: Accompanied by a whetstone.

The Outback is a clear homage to the knife used by Paul Hogan in the Mr. Crocodile Dundee films, in fact it faithfully follows its shape and dimensions.

Intended use: Survival / utlity

Type of production: Industrial
Production Country: Italy
Blade: Stainless Steel N690Co 58/60 HRC
Blade treatment: Satin finish
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5mm.
Overall length: 310mm.
Balancing: Advanced to 2cm. by guard branch
Weight: 330g.
Sheath: Nylon, from thigh
Packaging: cardboard box with Fox logos
Notes: -

Intended Use: Survival / Utlity

Type of production: Industrial
Production Blade: Italy
Blade: Stainless Steel N690Co
Treatment Blade: Black Idroglider
Handle: Forprene
Blade length: 180mm.
Blade thickness: 6.5mm.
Length closed: -
Overall length: 310mm.
Thick when closed: -
Balancing: Advanced to 2.5cm. the branch of guard
Weight: 352g.
Closure: -
Clip: -
Sheath: Nylon compatible M.O.L.L.E.
Packaging: cardboard box with Fox logos
Notes: Survival Kit in aluminum box sealed, with its MOLLE compatible nylon sheath

The survival kit contains:
* Container for water
* Nylon strap
* Mini Compass
* candle
* Flint
* Saw wire
* Fishing kit
* Multi-tool
* matches
* Needle and thread kit
* blade
* Emergency whistle
* Copper wire
* SOS mirror
* pencil

The new AVES has been designed especially for pilots as a survival and emergency knife. The extremely massive, spherical ground blade is coated with DLC and comes as close as possible to the concept of "indestructible" with the material thickness of 6 mm across its entire surface. Despite its compact design, this blade and its width have a very high degree of hacking efficiency. This spares the deeply retracted edge of the belt cutter with its lines and also allows it to be used with a fitted Kydex sheath, a benefit not to be underestimated in tight cockpits. In addition, this knife includes a second sheath made of Cordura. It is MOLLE-compatible and can also be worn on the lower leg. The handle end is formed as a lever/screwdriver. A grindstone is located under the G-10 casing. An indestructible tool on which you can completely rely in an emergency.

Blade: 58/59HRC N690 Stainless Steel
Handle: G-10
Blade Length: 145mm.
Blade Thickness: 6mm.
Overall Length: 280mm.
Weight: 495g.
Lock: -
Clip: -
Sheath: 1x Nylon - 1x Kydex
Notes: Made in Italy - Sharpening Stone - Fire Steel - Adopted, developed and
designed in collaboration with the Italian Army Air Force as a survival knife for helicopter pilots

Avi Nardia - Martial Arts Instructor
When I began teaching combat unfortunately I noticed that many teach the use of the knife in the wrong way. The knife is one of the most important tools for the man and his daily use is connected to my personal story, to my way of life, the principles learned from the teachings of my father and all the experience acquired as a teacher. So I decided to design this knife especially for my students, who have to learn that when they are alone in the woods must be able, with a single tool, to build their shelter, finding food and water, build a fire to know and meet all requirements needed to survive. My idea is with the knife KAPAP can survive and save lives in any place and at any time.

Intended Use: Survival / Utlity

Type of production: Industrial
Production Blade: Italy
Blade: Stainless Steel N690Co
Treatment Blade: Black Idroglider
Handle: Black Canvas Micarta
Blade length: 190mm.
Blade thickness: 6mm.
Length closed: -
Total length: 320mm.
Thick when closed: -
Balance: Advanced to 3cm. the branch of guard
Weight: 395g.
Closing: -
Clip: -
Sheath: Cordura, with attacks SPRINGS
Packaging: cardboard box with logos Fox FKMD
Notes: Survival Kit included, removable, supplied with Cordura case with attacks SPRINGS-Designed and developed in collaboration with Avi Nardia, Kapap Combatives Instructor

The survival kit contains:
* Container for water
* Nylon strap
* Mini Compass
* candle
* Flint
* Wire saw
* Fishing kit
* Multi-tool
* matches
* Needle and thread kit
* blade
* Emergency whistle
* Copper wire
* SOS mirror
* lapis
* Fluorescent light stick

Intended Use: Military / Tactical

Type of production: industrial
Production Blade: Italy
Blade: Stainless steel N690Co 58/60HRC
Treatment Blade: Teflon
Handle: Forprene
Blade length: 145mm.
Blade thickness: 6mm.
Length closed: -
Total length: 275mm.
Balance: on the branch guard
Weight: 276g.
Closing: -
Clip: -
Sheath: tactical nylon
Notes: -

Fox - FX-G2DC - The Predator - Desert Camo Tanto - Knife

Intended Use: Sport / Tactical / Military

Blade: Stainless steel N690Co 58/60HRC
Handle: removable Forprene
Blade length: 180mm.
Blade thickness: 6mm.
Closed Length: - mm.
Total length: 295mm.
Balance: -
Weight: 298g.
Closing: -
Clip: -
Sheath: Cordura and ballistic rubber sheath with leg attachment to extra for a folding knife
WARNING: the color of the sheath varies depending on the availability / choice of production company: [email protected] or 0331-632686 for additional info.
Notes: -

Intended use: Tactical / Military

Country of Production: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade Finish: Teflon
Handle: removable in Forprene
Blade length: 145mm.
Blade thickness: 6mm.
Total length: 265mm.
Weight: 230g.
Sheath: cordura and ballistic rubber with thigh fastening
Note: -

Knife Withdrawn from Private Collection
Type: Previously Purchased
Condition: In good condition
Available in the market: No longer in production
Sharpening: Factory
Marks on the blade: Some marks
Marks on the handle: None
Box: NOT Present
Sheath: In kydex
Manuals, Certificates, and Warranties: NO
Checked and Certified by our internal laboratory
Intended Use: Tactical/Utility/Collection

Type of Production: Industrial
Blade: N690Co stainless steel 58/60HRC Full Tang
Blade Treatment: PVD
Blade Production: Italy
Handle: G10
Blade Length: 115mm.
Blade Thickness: 6mm.
Total Length: 255mm.
Balance: On the guard branch
Weight: 330g.
Sheath: Polymers with tech lock
Notes: Designed by Specwog Dean Rostohar

New version 2014 with Foliage Green Micarta handle

ST3-F is a knife designed and drawn by chief instructor Paul Bozzo TEAM SURVIVAL (school of survival and survival).
This project was developed through years of direct experience in the field.

Intended Use: Survival / Utlity

Type of production: Industrial
Production Blade: Italy
Blade: Stainless Steel N690Co
Treatment Blade: Black Teflon
Handle: Canvas Micarta Green
Blade length: 220mm.
Blade thickness: 6mm.
Overall length: 360mm.
Balancing: Advanced 2.5 cm. the branch of guard
Weight: 552g.
Sheath: Cordura with soft attacks
Packaging: cardboard box with Fox logos
Note: designed by Paul Bozzo

Fox - Trapper - FX-132MGT - knife

Intended usage: Utility

Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel N609Co 58/60HRC
Treatment Blade: Black Teflon
Handle: Green Canvas Micarta
Blade length: 165mm.
Blade thickness: 6mm.
Length closed: -
Total length: 295mm.
Thick when closed: -
Balance: advanced to 0.5cm.
Weight: 358g.
Closing: -
Clip: -
Sheath: Cordura
Packaging: cardboard box with Fox logos
Notes: -