Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Rockstead - Hizen - DLC YXR7 & Duralumin - Folding Knife
With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and hold of the thread and in innovation for the materials used and for construction techniques.
Intended use: Collection / SportsType of production: Midtech
Country of production: Sakai - Japan
Blade: in Hitachi YXR7 steel at 64HRC
Blade treatment: Black DLC mirror
Handle: A7075 Duralumin with Hv400 hardness anodizing
Blade length: 70mm.
Blade thickness: 3.3mm.
Length closed: 104mm.
Total length: 176mm.
Thick when closed: 11.4mm.
Weight: 74g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel of 1mm. with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: -RO-HIZ-DLC -
Rockstead - 2010 Higo-MH-DLC Serial #303 - YXR7 HPC & Micarta - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: -
* Marks on handle: - -
* Box: marketed in silk pouch.
* Scabbard: Leather, belt, original, with a few small marks given by time.
* Manuals, Certificates and Warranties: present.
* Checked and Certified by our in-house laboratory
The HIGO-MH-DLC folder features a 3.5-inch YXR7 blade with DLC coating and Micarta handle. The incredible mirror finish is achieved by heat treating the blade and gradually grinding by hand with wet and dry sandpaper of 400, 600, 800, 1,200 and 2,000. The HIGO-MH-DLC comes with a black leather belt case with a slot to hold the included torx wrench.
Country of manufacture: Japan
Type of manufacture: midtech
Blade: DLT571 steel (Hitachi YXR7 at 64.1HRC with 3micron HPC coating and hardness of Hv1300)
Handle: 2mm stainless steel sus402J2 at 52HRC with micarta handles
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 216mm.
Weight: 139g.
Closure: Liner Lock
Clip: stainless steel
Notes: Serial number 303 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially availableRO-HIMHDLC-CP -
Rockstead - 2010 Higo-ST Serial #005 - YR7 HPC & Duralumin - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.
The best industrial knives currently in production are marketed under the Rockstead brand. Created by Katsumi Kitano, who has been making quality knives for more than 20 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in the level of innovation for the materials used and construction techniques.
Country of production: Japan
Type of production: midtech
Blade: Hitachi YXR7 steel at 64.8HRC with 3micron HPC coverage and hardness of Hv1800
Handle: Duralumin A2024 with surface anodizing and hardness of Hv400
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 215mm.
Weight: 130g.
Closure: Frame Lock with SKD11 casement at 61HRC
Clip: made of 402J2 steel at 48HRC
Notes: Serial number 005 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially availableRO-HISTHPC-CP -
Master of Defense - CQD Mark II by Duane Dieter - PRIVATE COLLECTION - knife
Knife withdrawn from private collection - Overall in good condition, has some minor wear marks on the aluminum handle. On the other hand, the blade is in excellent condition and still has the factory sharpening - The knife is without packaging and certificates, but comes with the original Nylon sheath - Checked and certified by our in-house laboratory.
Innovative tactical/military knife, designed by Duane Dieter, produced in the late 1990s and immediately became an icon in the cutlery scene.
Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janick, Keating, Ayoob, Watson and Casillas.
Intended Use: Tactical/Collection
Production type: Industrial
Country of manufacture: USA
Blade: 154CM stainless steel with titanium nitriding
Handle: aircraft grade aluminum with non-slip and skull-crasher inserts
Blade length: 85mm.
Blade thickness: 3.5mm.
Total length: 200mm.
Weight: 122g.
Closure: Button Lock with additional safety system
Clip: removable and reversible, stainless steel
Sheath: made of Nylon with MOLLE attachmentsMOD-MARKII-CP -
Rockstead - Chou HPC - Black Silk - neck knife
With the Rockstead brand, of Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently being marketed.
Created by Katsumi Kitano, who has been producing quality knives for over 20 years, to the extent that they have been awarded the highest recognition among the artisanal cutlers in Japan, they prove to be exceptional both in cutting, penetration and thread strength and in terms of innovation for the materials used and for construction techniques.
Blade: Hitachi YXR7 65HRC steel with HPC titanium cover
Handle: interweaving in silk tied by hand
Blade length: 45 mm.
Blade thickness: 4 mm.
Total length: 120 mm.
Weight: 60 g.
Sheath: neck, in Kydex
Notes: Accompanied by silk bag and certificate of guarantee with technical specifications.4069BLACK -
Rockstead - TEI DLC - 65hrc - knife collection
This knife can still slice paper even after the punishment of striking and cutting dried bamboo.This knife has a beautiful convex surface with extreme sharpness.This is a flagship of the ROCKSTEAD folding knife collection. Both sides of the blade are convex. The blade is in the shape of the traditional Japanese sword. It cuts well and is strong. You can enjoy its strong cutting capabilities for a long time.
Full length: 213.00 mm
Blade length: 93.00 mm
Weight: 155 g
Thickness: 3.70 mm
Material: YXR7
Hardness: HRC65
Blade geometry: Honzukuri
Hard coating: DLC
Knives type: FolderRO-TEI -
Rockstead - Chou HPC Ironwood - Neck Knife - Knife
With Rockstead brand of Ishida Co. Sakai, Japan, they are currently marketed with the best industrial knives currently in production.
Created by Katsumi Kitano, who for 20 years has been producing quality knives so much to have been awarded the highest award among the knife craftsmen in Japan, you demonstrate exceptional both in cutting capacity, penetration and tightness of the wire both in terms of innovation for and materials used for the construction techniques.
Use: utility / Neck KnifeProduction Country: Japan
Blade: stainless Hitachi YXR7 to 65HRC
Finish: HPC titanium
Handle: Ironwood
Blade length: 45 mm.
Blade thickness: 4 mm.
Overall length: 120 mm.
Weight: 60 g.
Sheath: neck, Kydex thermoformed
Notes: Accompanied by a certificate of guarantee with technical specifications4069IW -
Master of Defense - CQD Mark II by Duane Dieter - knife
Master of Defense - CQD Mark II by Duane Dieter - knife
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama USA
Blade: 154CM stainless steel with titanium nitride
Handle: aeronautical aluminum with non-slip inserts and skull-crasher
Blade length: 85mm.
Blade thickness: 3.5mm.
Closed Length: -
Overall length: 200mm.
Thick when closed: -
Weight: 122g.
Closure: Button Lock with secure additional system
Clip: removable and reversible, stainless steel
Packaging: cardboard box with logos M.O.D. Master of Defense and warranty certificates - Nylon sheath with MOLLE attacksMARKII -
Rockstead - Chu DLT - knife
Rockstead - Chu DLT - knife
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest honor among the artisan knife makers in Japan, proved to be exceptional in cutting capacity, penetration and sealing wire is at the level of innovation for materials and construction techniques.
Blade: Stainless steel with 64HRC Hitachi YXR7 to cover DLT571 3micron
Handle: in green paracord
Blade length: 120mm.
Blade Thickness: 6mm.
Overall length: 2150mm.
Weight: 284g.
Balancing: 1cm back from the lower branch of the guard
Sheath: Leather
Note: Product is out of printChu002 -
Beltrame - Tinea Kombat knife - coltello
***************************************
FUORI PRODUZIONE
NOTA INFORMATIVA: questo prodotto è presente nel nostro database unicamente a scopo storico ed informativo, non ci risulta più in produzione e pertanto non è acquistabile. Per aggiornamenti: [email protected]
***************************************
Questo kombat è stato disegnato da Ivano Beltrame e realizzato insieme al maestro Danilo Rossi, fondatore della Calix Academy Europe Club, accademia il cui scopo è la divulgazione delle tradizioni italiane nel maneggio di armi bianche e bastoni.
Dalla Paranza siciliana, alla Puntatina, al sistema Zaccagno, alla Pizzica pugliese, alla Beidana valdese, al Falcet piemontese alla Britula friulana.
Dettaglio delle scelte tecniche:
l’impugnatura con l’elsa a proteggere la mano serve a far scivolare durante il combattimento la lama all’avversario, e ci siamo ispirati sempre per restare in ambito tradizionale alla coccia del fioretto italiano.
Il foro sulla lama serve a bloccare la lama dell’avversario e a disarmarlo non con una azione di forza ma di destrezza.Lo skull krash minimalista non serve tanto a rompere quanto a strisciare sull’avversario per disarmarlo o per far leva sui tendini sempre per una azione di disarmo.
Il nome Tinea si ispira al un famoso combattente italiano Ottaviano detto er più de Roma reso celebre dal film di Adriano Celentano “ Storie di donne e di coltelli”.La scelta dei materiali il pratico acciaio N690 e lo spessore 6mm ne garantiscono la robustezza in ogni situazione; è stato testato in prove estreme di foratura e taglio senza perdere efficienza.
Il manico in G10 oltre a garantire un ottimo grip e anche efficace conduttore in caso di scossa elettrica.
Al momento è disponibile con copertura teflon in grado di evitare sia in diurna che in notturna quelle situazioni di rifrangenza durante l'utilizzo.
Il fodero è stato studiato sia per attacco in cintura ma soprattutto da posizionare con un pettorale proprio in copertura ¾ del cuore con uno sgancio rapido per situazioni critiche, difficilmente i foderi posti in altre zone garantiscono una immediatezza di copertura in caso di attacco.
Destinazione d'uso: Militare/Tattico/Collezione
Tipo di produzione: industriale
Lama: 58-59HRC N690
Trattamento Lama: teflonata
Produzione Lama: Italia
Manicatura: G10
Lunghezza lama: 160mm.
Spessore della lama: 6mm.
Lunghezza totale: 295mm.
Bilanciatura: sul ramo di guardia
Peso: 370g.
fodero: in cordura con attacco ascellare
Note: Design by Danilo Rossi7224€204.09Out of stock -
Rockstead - Chou HPC - red silk - neck knife
With the Rockstead brand, of Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently being marketed.
Created by Katsumi Kitano, who has been producing quality knives for over 20 years, to the extent that they have been awarded the highest recognition among the artisanal cutlers in Japan, they prove to be exceptional both in cutting, penetration and thread strength and in terms of innovation for the materials used and for construction techniques.
Blade: Hitachi YXR7 65HRC steel with HPC titanium cover
Handle: interweaving in silk tied by hand
Blade length: 45 mm.
Blade thickness: 4 mm.
Total length: 120 mm.
Weight: 60 g.
Sheath: neck, in Kydex
Notes: Accompanied by silk bag and certificate of guarantee with technical specifications.4069RED -
Rockstead - Jin DLC Leather - coltello
Creati da Katsumi Kitano, che da oltre 20 anni produce coltelli di qualità tanto da esser stato insignito del massimo riconoscimento tra i coltellinai artigiani in Giappone, si dimostrano eccezionali sia in capacità di taglio, penetrazione e tenuta del filo sia a livello di innovazione per i materiali utilizzati e per le tecniche costruttive.
Lama: full tang in acciaio Hitachi YXR7 a 65HRC con copertura HPC 3micron - Hv1800
Manicatura: in legno "iron wood"
Lunghezza lama: 130mm.
Spessore della lama: 6mm.
Lunghezza totale: 250mm.
Peso: 304g.
Bilanciatura: sul ramo di guardia inferiore
Fodero: cuoio
Note: lama asimmetrica, accompagnato da certificati tecnici e di garanzia.4065L -
Rockstead - Kou-S DLC - coltello
Con il marchio Rockstead, della Ishida Co. di Sakai, in Giappone, sono attualmente commercializzati i migliori coltelli industriali attualmente in produzione.
Creati da Katsumi Kitano, che da oltre 20 anni produce coltelli di qualità tanto da esser stato insignito del massimo riconoscimento tra i coltellinai artigiani in Giappone, si dimostrano eccezionali sia in capacità di taglio, penetrazione e tenuta del filo sia a livello di innovazione per i materiali utilizzati e per le tecniche costruttive.
Lama: acciaio Hitachi YXR7 a 64.7HRC con copertura DLC 3micron - Hv1800
Manicatura: Same (vera pelle di razza) e alluminio aeronautico con trattamento black alumite a Hv400
Lunghezza lama: 82 mm.
Spessore della lama: 3.5 mm.
Lunghezza totale: 182 mm.
Peso: 100 g.
Chiusura: Liner Lock in acciaio 402J2 a 52HRC
Clip: in acciaio 402J2 a 52HRC
Note: Modello numerato e accompagnato da certificato di garanzia con specifiche tecniche.4058