Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Spyderco - Silverax - CPM-S30V & Carbon Fiber - PRIVATE COLLECTION - C228CFP - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: New
* Commercially available: Discontinued
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / CollectionProduction Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S30V
Blade Finish: Satin finish
Handle: Carbon Fiber and G10 Laminate
Blade Length: 88mm.
Blade thickness: 3.5mm.
Length closed: 118mm.
Total length: 203mm.
Weight: 94g.
Closure: Compression Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife, from private collectionC228CFP-CP -
Spyderco - Pattada - N690Co & G10 - PRIVATE COLLECTION - C204GP - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: In very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A couple of small marks above the opening hole, right side blade (see photo)
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / CollectionType of Production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: Satin finish
Handle: Stainless steel and G10
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 121mm.
Total length: 221mm.
Weight: 119g.
Closure: Liner Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife, from private collectionC204GP-CP -
CRKT - M16-12LE knife Small Law Enforcement Tanto - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: small marks on tip
* Marks on handle: clip slightly marked
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryBlade: Teflon-coated AUS-8 high-carbon 57/58HRC stainless steel
Handle: Zytel grips
Blade length: 76 mm.
Blade thickness: 3 mm.
Total length: 185mm.
Weight: 97g.
Closure: Liner Lock
Clip: Stainless Steel
Notes: equipped with safety catchAP-CM16-12LE -
Spyderco - Smock - New Pivot 2024 - S30V & Carbon Fiber/G10 - C240CFP - knife
Kevin Smock is an award-winning industrial designer who is making waves with his visionary handcrafted custom knives. Based on his SK23, the Spyderco Smock translates his innovative style into a high-quality production knife.
The Smock's most unique feature, however, is the push-button release of its high-strength Compression Lock mechanism, which allows the knife to close securely and easily without getting your fingers near the edge of the blade. Subtle, innovative and distinctly different, the Smock reflects Kevin Smock's unique approach to knife making.
Intended Use: Sporting/EDC
Type of production: Industrial
Country of manufacture: Taiwan
Blade: stainless steel CPM-S30V
Blade Finish: double satin finish, both horizontal and vertical
Handle: laminated carbon fiber and G10
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed: 11mm.
Weight: 104g.
Closure: Compression Lock
Clip: Stainless steel
Packaging: Cardboard box with Spyderco logos
Notes: front flipper opening system on ball bearings - new 2024 version with revised and increased pivotC240CFP -
Spyderco - Lil' Matriarch - Serrated Black FRN - PRIVATE COLLECTION - C162SBK - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, packaging slightly damaged
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: EDC / RescueProduction Type: Industrial
Country of Production: Japan
Blade: Stainless steel VG-10
Blade Treatment: Satin finish
Handle: FRN
Blade length: 75mm.
Blade thickness: 2mm.
Length closed: 107mm.
Total length: 180mm.
Weight: 70g.
Closure: Back Lock
Clip: stainless steel
Packaging: Cardboard box with Spyderco logos
Notes: -C126SBK-CP -
Spyderco - Endura 4 Stainless Steel Plain Edge - C10P - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
Type: Previously purchased
Condition: in like-new condition
Commercial availability: Available
Sharpening: Factory
Blade marks: -
Handle marks: -
Box: Present
Sheath: -
Manuals, Certificates, and Guarantees: Present
Checked and Certified by our in-house laboratory
Intended Use: SportingProduction Type: Industrial
Blade: VG-10 stainless steel
Blade Treatment: -
Blade Production: Japan
Handle: Stainless Steel
Blade Length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Total Length: 220mm.
Balance: -
Weight: 161g.
Locking Mechanism: Back Lock
Clip: Removable, multiposition, stainless steel
Sheath: -
Notes: -AP-C10P -
Spyderco - Endura 4 - Half Serrated Black Blade - PRIVATE COLLECTION - C10PSBBK - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in good condition.
* Commercially available: Findable
* Sharpening: Factory.
* Marks on blade: Small abrasions on matte black finish.
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: SportingType of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: black titan carbonitriding
Country of manufacture: Japan
Handle: black FRN with embedded stainless steel liners
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 220mm.
Thickness when closed: 15.5mm.
Weight: 106g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Notes: previously purchased knife, from private collectionC10PSBBK-CP -
Spyderco - Native 5 - CPM-S90V & Fluted Carbon Fiber - C41CFFP5 - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S90V Powder Steel
Blade finish: Satin finish
Handle: Fluted Carbon Fiber
Blade Length: 75mm.
Blade thickness: 3.2mm.
Length closed: 102mm.
Total length: 177mm.
Weight: 79g.
Closure: Back Lock
Clip: stainless steel, removable and multi-position
Packaging: cardboard box with Spyderco logos
Notes: -C41CFFP5 -
Viper - Belone by Vox - Satin M390 & Blue Dark Matter Carbon Fiber - V5970TIFCB - knife
In designing the Belone, Danish Jesper Voxnaes started from typical lines of the Italian regional tradition, perfectly reworked according to his modern, minimalist style that has made him famous worldwide. The result is a light, tapered folding knife embellished with refined details, such as the holes in the back of the handle.
The Böhler M390 Microclean steel gives the Belone excellent cutting qualities, and the ball bearings make it the fastest flipper opening, perfectly integrated into the overall design. The carefully crafted ergonomically designed handle has an anodized titanium frame enclosed between thin carbon fiber folders. The Belone's clip is attached to the spacer so that the knife disappears completely into the pocket, maintaining maximum discretion.Intended Use: Sporting / EDC
Production type: Industrial
Country of manufacture: Italy
Blade: Stainless steel M390 60-61HRC
Blade Treatment: Satin finish
Handle: Stonewashed titanium and forged carbon fiber "Dark Matter" in blue color
Blade length: 85mm.
Blade thickness: 3.4mm.
Length closed: 114mm.
Total length: 200mm.
Thickness when closed:11.3mm.
Weight: 78g.
Closure: Frame Lock
Clip: anodized titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesV5970TIFCB -
Viper - Vale by Vox - Satin MagnaCut & Titanium Bronze - V6004TIBR - knife
Enthusiasts know the value of a good knife. Viper honors this idea with its high-quality EDC knife, called Vale, made from select materials. The MagnaCut blade opens gently thanks to the thumb stud and is locked in place by the sturdy liner lock. The titanium handle features three-dimensional machining, offering a pleasant feel and safe work. The anodized titanium backspacer completes the knife's harmonious appearance.
Intended Use: EDC
Production type: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut steel
Blade Finish: Satin
Handle: Anodized titanium
Blade length: 75mm (cutting edge of 68mm.)
Blade thickness: 4mm.
Length closed: 111mm.
Total length: 184mm.
Thickness when closed:15mm.
Weight: 105g.
Closure: Liner Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesV6004TIBR -
Viper - Vale by Vox - Satin MagnaCut & Titanium Blue - V6004TIBL - knife
Enthusiasts know the value of a good knife. Viper honors this idea with its high-quality EDC knife, called Vale, made from select materials. The MagnaCut blade opens gently thanks to the thumb stud and is locked in place by the sturdy liner lock. The titanium handle features three-dimensional machining, offering a pleasant feel and safe work. The anodized titanium backspacer completes the knife's harmonious appearance.
Intended Use: EDC
Production type: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut steel
Blade Finish: Satin
Handle: Anodized titanium
Blade length: 75mm (cutting edge of 68mm.)
Blade thickness: 4mm.
Length closed: 111mm.
Total length: 184mm.
Thickness when closed:15mm.
Weight: 105g.
Closure: Liner Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesV6004TIBL -
Viper - Moon by F. Silvestrelli - Green Dark Matter Carbon Fiber & CPM MagnaCut - V6008FCV - knife
Designed by master designer Fabrizio Silvestrelli, Moon is Viper's first knife to adopt the hardened "button lock," a locking mechanism that is activated by a button on the handle. This type of lock provides a secure and reliable lock for the blade.
A state-of-the-art steel such as MagnaCut was chosen for the blade: a high-strength steel known for its hardness and edge retention capacity. Thanks to these properties, the blade is able to tackle a variety of tasks without any problems.
The handle has an ergonomic and comfortable grip. The 3D finish gives the handle a unique look and provides a secure grip during use. The handle is precisely designed to fit the shape of the hand, ensuring optimal control of the knife.
Intended Use: Sporting
Production type: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut 61/62HRC steel
Blade finish: Satin finish
Handle: Dark Matter Carbon Fiber in Green color, double 420 stainless steel liner with GR2 titanium spacer and 303/305 stainless steel hardware
Blade length: 87mm (cutting edge of 75mm.)
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed:18mm.
Weight: 140g.
Closure: Button Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio SilvestrelliV6008FCV -
Viper - Moon by F. Silvestrelli - Natural Micarta & CPM MagnaCut - V6010CN - knife
Designed by master designer Fabrizio Silvestrelli, Moon is Viper's first knife to adopt the hardened "button lock," a locking mechanism that is activated by a button on the handle. This type of lock provides a secure and reliable lock for the blade.
A state-of-the-art steel such as MagnaCut was chosen for the blade: a high-strength steel known for its hardness and edge retention capacity. Thanks to these properties, the blade is able to tackle a variety of tasks without any problems.
The handle has an ergonomic and comfortable grip. The 3D finish gives the handle a unique look and provides a secure grip during use. The handle is precisely designed to fit the shape of the hand, ensuring optimal control of the knife.
Intended Use: Sporting
Production type: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut 61/62HRC steel
Blade Finish: Stonewashed
Handle: Natural Canvas Micarta, double 420 stainless steel liner with GR2 titanium spacer and 303/305 stainless steel hardware
Blade length: 87mm (75mm. cutting edge).
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed:18mm.
Weight: 140g.
Closure: Button Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio SilvestrelliV6010CN -
Viper - Moon by F. Silvestrelli - UltreX SureTouch & CPM MagnaCut - V6010GG - knife
Designed by master knife maker Fabrizio Silvestrelli, Moon is Viper's first knife to adopt the hardened "button lock."
The handle uses the brand new UltreX SureTouch composite in modified G-10.
SureTouch is a revolutionary new patent-pending process that combines layers of G-10 with rubber. Now you can have the strength and durability of G-10 with the grip and non-slip properties of rubber, all in one material.
The combination of G-10 and rubber offers one of the most revolutionary advantages on the market. Because G10 is commonly processed for the knife and gun industry, this new material allows for greater ease of use. SureTouch allows for improved grip and comfort.
Intended Use: Sporting
Type of production: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 61/62HRC steel
Blade finish: Stonewashed
Handle: UltreX SureTouch (modified G10 with rubberized, non-slip exterior) with double 420 stainless steel liner with GR2 titanium spacer and 303/305 stainless steel hardware
Blade length: 87mm (cutting edge of 75mm.)
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed:18mm.
Weight: 140g.
Closure: Button Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio SilvestrelliV6010GG -
Spyderco - Domino - CTS-XHP & Cubic Check Carbon Fiber - C172CFTIP - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: Overall in very good condition
* Commercially available Discontinued, remained on the market from 2013 to 2017.
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: A few small abrasion marks on the clip.
* Box: -
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / EDCProduction Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CTS-XHP
Blade finish: Satin finish
Handle: Titanium and Carbon Fiber laminated Cubic Check
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 116mm.
Total length: 195mm.
Weight: 119g.
Closure: Frame Lock R.I.L. (Reeve Integral Lock)
Clip: Multiposition and removable, stainless steel
Notes: Previously purchased knife from a private collection - Design by Eric Glesser - Opening via patented Carson Flipper system - Pivot on ball bearingsSC172CFTIP-CP -
Viper - Katla by Vox - 3D Carbon Fiber - V5980FC3D - knife
Katla, designed by Jesper Voxnaes, is a liner lock folding knife, which revives the Tanto profile blade with a bevel that enhances the excellent cutting qualities of the Böhler M390, hardened at 59/61 HRC.
The rotation mechanism is given by thrust bearings, and can be opened with the double peg for the thumb, or with the very fast pinball machine.
The detail that characterizes the Katla is the 3D processing of the handle on both ends of the cheek which recalls, reworking them in a modern key, the insignia of the most classic Viper models.
The flat edges and the titanium clip allow a comfortable and discreet port.
Intended use: EDC / SportsType of production: Industrial
Country of production: Italy
Blade: M390 60 / 61HRC stainless steel
Blade finish: Satin
Handle: Carbon fiber with 3D processing
Blade length: 82mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 198mm.
Weight: 122g.
Closure: Liner Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes - opening via Carson Flipper system on ball bearingV5980FC3D -
Spyderco - Lil Temperance 3 - K390 Lightweight Knife - C69PBL3K390 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: USA
Blade: K390 steel at 64/65HRC
Blade finish: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon)
Blade Length: 74mm.
Blade thickness: 4mm.
Length closed: 111mm.
Total length: 182mm.
Weight: 108g.
Closure: Compression Lock
Clip: removable and reversible, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: variant in FRN Blue made from Bohler K390 carbon steelC69PBL3K390 -
CRKT - P.S.D. II (Particle. Separation. Device.) by Hammond - AUS-10 & Brown G10 - 7910 - knife
Jim Hammond's original P.S.D. earned its name (Particle. Separation. Device.) for its ability to cut anything, anywhere. The P.S.D. II brings that same capability to a smaller, more portable folding knife, reducing the overall length by more than an inch. The blade is made of corrosion-resistant AUS10 with assisted opening on IKBS ball bearings that ensure quick and easy one-handed operation.
Intended Use: Tactical / EDC
Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-10A
Blade Treatment: Black Oxide
Handle: G10
Blade Length: 76mm.
Blade thickness: 2.8mm.
Length closed: 101mm.
Total length: 178mm.
Weight: 102g.
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Jim Hammond - Assisted opening via Carson Flipper system and IKBS ball bearing movementC7910 -
CRKT - A.B.C. (All. Bases. Covered.) by Hammond - 12C27 & Black G10 - 2606 - knife
Jim Hammond's A.B.C. (All. Bases. Covered.) makes its return in an even more versatile form. It is now a folder, bringing the varied capabilities of the original fixed blade into a more convenient and compact design. With its assisted opening and IKBS pads, it's always ready for action at any time, while the G10 handle provides a strong grip even in adverse weather conditions.
Intended Use: Tactical
Production Type: Industrial
Country of Production: China
Blade: Sandvik 12C27 stainless steel
Blade treatment: Black Oxide
Handle: G10
Blade Length: 85.9mm.
Blade thickness: 3.1mm.
Length closed: 116mm.
Total length: 203mm.
Weight: 110g.
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Jim Hammond - Assisted opening via Carson Flipper system and IKBS ball bearing movementC2606 -
Viper - Keeper 2 by Fabrizio Silvestrelli - Elmax & Damascus Carbon Fiber - V6000FCDL - knife
Intended Use: Tactical/Sporting
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel Elmax SuperClean 59/61HRC
Blade Finish: Satin finish
Handle: carbon fiber and stainless steel damascus effect handle, 1.4116 stainless steel liners and GR2 titanium spacer
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: 115mm.
Total length: 210mm.
Weight: 145g.
Closure: liner lock with integrated Smart Automatic Safe Lock System.
Clip: stainless steel 1.4116, removable and reversible
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio "Silvester" SilvestrelliV6000FCLD -
Spyderco - Salt I - H1FRN Yellow Knife - C88SYL - knife
A myth in the knife world is that out there somewhere there is a steel with high cutting capabilities that cannot rust.
A Japanese foundry recently turned this myth into reality with the introduction of a steel called H1. H1 is a PH steel, which is a precipitation-processed, hard-rolled alloy with no heat treatment and 0.1 percent nitrogen that acts like carbon in the steel matrix but does not react with chlorine to create rust.
Surprisingly, it maintains a sharp edge comparable to that of the higher quality knife steels used in the industry by most knife manufacturers.
Intended use: sub/sporting
Type of production: industrial
Country of manufacture: Japan
Blade: nitrogen steel H1
Blade finish: satin-finished
Handle: FRN
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 175mm.
Thickness when closed: 15mm.
Weight: 54g.
Closure: Back Lock
Clip: removable, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -SC88SYL -
Viper - Basic 1 by T. Rumici - D2 & Green Canvas Micarta - VT4028CG - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: full tang in D2 steel
Blade treatment: Stonewashed
Handle: Micarta
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 203mm.
Weight: 210g.
Sheath: made of Kydex, with Tek-Lok type attachment
Packaging: cardboard box with Viper logos
Notes: design by Tommaso RumiciVT4028CG -
Viper - Gianghi Brown Micarta - N690 - design by Fabrizio Silvestrelli - V4882IM - knife
Intended use: Light Utility/Hunting
Type of production: Industrial
Blade Production: Italy
Blade: Full Tang in N690Co stainless steel
Blade Treatment: Stonewash
Handle: Brown Micarta
Blade Length: 115mm.
Blade Thickness: 5mm.
Closed Length: -
Total Length: 250mm.
Thickness when closed: -
Balance: set back by 3cm
Weight: 245g.
Closure: -
Clip: -
Sheath: brown leather
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio SilvestrelliV4882IM -
Viper - 2023 Titanium and Mother of Pearl Limited Edition Collection - Hug, Key, Twin - VCOL/2022M - knives
Precious Mother-of-Pearl Collection consisting of 3 knives: TWIN, KEY, HUG with titanium handle and mother-of-pearl insert. Rounded spring with handmade file work. Accompanied by individual leather liners.
Limited and numbered series of 200 sets with cylindrical wooden and plexiglass display stand.
HUG DATA SHEET
Type of production: Industrial, with handmade lima spring
Country of production: Italy
Blade: Bohler M390 Microclean stainless steel, HRC 59/61
Blade treatment: Satin finish
Handle: Titanium GR5 and Mother of Pearl
Blade length: 71mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 184mm.
Thickness when closed: 14mm.
Weight: 75g.
Closure: Slipjoint
Clip: titanium
Notes: Design by Sacha Thiel
KEY DATA SHEET
Type of production: Industrial, with handcrafted file spring
Country of Production: Italy
Blade: Bohler M390 Microclean stainless steel, HRC 59/61
Blade treatment: Satin finish
Handle: Titanium GR5 and Mother of Pearl
Blade length: 76mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 185mm.
Thickness when closed:10.5mm.
Weight: 75g.
Closure: SlipJoint
Clip: -
Notes: Design by Jesper Voxnaes
TWIN DATA SHEET
Type of production: Industrial, with handmade file spring
Country of Production: Italy
Blade: Bohler M390 Microclean stainless steel, HRC 59/61
Blade treatment: Satin finish
Handle: Titanium GR5 and Mother of Pearl
Blade length: 77mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 176mm.
Thickness when closed: 10mm.
Weight: 77g.
Closure: Slipjoint
Clip: -
Notes: Design by Fabrizio SilvestrelliVCOL/2022M -
Spyderco - Endura 4 Serrated Knife - K390 Blue FRN - C10FPK390 - knife
Intended Use: Sporting
Type of production: industrial
Blade: Bohler K390 carbon steel at 64/65HRC - SERRATED
Blade treatment: satin finish
Country of manufacture: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 96mm.
Blade thickness: 3mm.
Length closed: 127mm.
Total length: 222mm.
Weight: 105g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Packaging: cardboard case with Spyderco logos
Notes: variant in FRN Blue made from Bohler K390 carbon steelC10FSK390 -
Viper - Vale knife by Vox - Walnut - MagnaCut - V6004NO - knife
Enthusiasts know the value of a good knife. Viper honors this idea with its high quality EDC knife, called Vale, made with selected materials. The MagnaCut blade opens smoothly with the thumb stud and is locked in place with the sturdy liner lock. The walnut handle features carvings on the back of the blade, providing a pleasant feel and safe working. The backspacer made of high-quality titanium completes the harmonious look of the knife. It also features a lanyard loop and a flip-over clip
Intended use: Gentleman/EDC
Type of production: Industrial
Blade production: Italy
Blade: CPM MagnaCut steel
Blade Treatment: Satin
Handle: walnut wood
Blade length: 68mm.
Blade thickness: 4mm.
Closed length: 111mm.
Total length: 184mm.
Closed thickness: 15mm.
Balancing: -
Weight: 95g.
Closure: Liner Lock
Clip: in titanium
Scabbard: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesV6004NO -
Viper - Vale knife by Vox - Purple Dark Carbon Fiber - MagnaCut - V6006FCP - knife
Intended use: Gentleman/EDC
Type of production: Industrial
Blade production: Italy
Blade: CPM MagnaCut steel
Blade Treatment: Stonewashed
Handle: Purple Dark Carbon Fiber
Blade length: 68mm.
Blade thickness: 4mm.
Closed length: 111mm.
Total length: 184mm.
Closed thickness: 15mm.
Balancing: -
Weight: 105g.
Closure: Liner Lock
Clip: in anodized titanium
Scabbard: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesV6006FCP -
CRKT - Pilar Large - Blackwashed Frame Lock Flipper by Vox - 5315KS - folding knife
Intended use: Sporting
Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Blackwashed
Handle: Blackwashed stainless steel
Blade length: 67.8mm.
Blade thickness: 3.8mm.
Length closed: 101.5mm.
Total length: 170mm.
Weight: 119g.
Closure: Frame Lock
Clip: Stainless steel, removable
Packaging: Cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5315KS -
CRKT - Overland Compact Knife by T. J. Schwarz - 6277 - knife
The compact folding knife ready to tackle any terrain.
It may be small, but just like the upgraded 4x4 vehicles that inspired its name, the Overland Compact is exaggeratedly built and ready to tackle the toughest conditions. It takes the design cues and materials of the full-size Overland and puts them into an ultraportable format that practically disappears into a pocket. When it's time to stop the convoy and set up camp, this knife can prepare light food and chop up the perfect marshmallow stick.
Intended Use: Sporty
Production type: Industrial
Country of manufacture: China
Blade: D2 steel
Blade treatment: Blackwashed
Handle: G10 and Blackwashed stainless steel
Blade Length: 57mm.
Blade thickness: 3.2mm.
Length closed: 81mm.
Total length: 137mm.
Weight: 88g.
Closure: FrameLock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by T. J. SchwarzC6277 -
CRKT - Squid Compact by Lucas Burnley - 2485K - knife
This small knife is a big deal. The Squid is known as the perfect knife for everyday use, expertly combining simplicity, usability and performance.
Neither brash nor flashy, it is the humble handyman of the knife world: reliable, solid and extraordinarily capable. Now, renowned designer Lucas Burnley has reworked it into a smaller, nimbler version, the Squid Compact. This reasonably priced folding knife is for everyone.
* Assisted opening: The assisted flipper allows rapid blade opening.
* Smooth opening: The IKBS™ ball bearing system ensures maximum smoothness.
* Easy sharpening: High-carbon stainless steel blade sharpens quickly and easily
* Maximum control: Grooves on the back of the blade to ensure a secure and comfortable grip
* Maximum durability: Stainless steel handle withstands heavy use.
* Low profile: Pocket clip ensures safe carrying
* Accessory options: Hole for lanyard or key ring
Intended Use: EDC
Production type: Industrial
Country of manufacture: China
Blade: Stainless steel 8Cr13MoV
Blade Finish: BlackWashed
Handle: BlackWashed stainless steel
Blade Length: 44mm.
Blade thickness: 2.6mm.
Length closed: 74mm.
Total length: 118mm.
Weight: 79g.
Closure: Frame Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Lucas Burnley - IKBS opening system on pinball-type bearings, spring preload assistedC2485K -
CRKT - Tuna Compact by Lucas Burnley - 2522 - knife
The little fish that rules every pond. Though small, the Tuna Compact evokes the power of one of the world's largest and fastest fish.
It takes the subtle elegance of designer Lucas Burnley's original Tuna and shrinks it into an ultra-compact folding knife. With a profile that suggests strong forward momentum and a blade shape that resembles a deep-sea carnivore, this everyday knife slices through packs and boxes faster than a bluefin tuna slices through waves on a taut line.
* Smooth opening: IKBS™ ball-bearing motion allows for a smooth blade opening.
* Easy sharpening: High-carbon stainless steel blade sharpens quickly and easily.
* Easy opening: The thumb engagement pin allows for quick one-handed opening.
* Exceptional grip: G10 handle provides exceptional grip in all conditions
* Brute force: Fame Lock system uses a thick locking bar to hold the blade in place
* Low profile: Pocket clip ensures safe and secure carrying away from prying eyes
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13MoV
Blade Finish: StoneWashed
Handle: G10 and BlackWashed stainless steel
Blade Length: 69mm.
Blade thickness: 3.6mm.
Length closed: 97mm.
Total length: 163mm.
Weight: 79g.
Closure: Frame Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Lucas Burnley - IKBS ball bearing opening systemC2522 -
CRKT - CEO MicroFlipper Sheepfoot by Rogers - 7083 - knife
The smaller version of the popular CEO folding knife, the Microflipper combines refined style with maximum practicality. It may be small, but it's a serious contender for any job thanks to its lightweight aluminum handle and razor-sharp blade made of Sandvik 12C27™ steel.
This stylish pocket knife is available in two versions: drop-point blade with silver aluminum handle and blue coating, or sheepfoot blade with blue aluminum handle and silver coating.
* Superior performance: Sandvik 12C27™ steel for excellent edge retention.
* Smooth opening: IKBS™ ball-bearing motion allows smooth blade opening.
* Fast opening: Flipper opening system deploys the blade quickly.
* Sturdy and lightweight: Aluminum handle combines strength and minimal weight
* Easy closing: The blade can be easily closed with one hand.
* Carrying options: Adjustable ambidextrous clip for carrying in left or right pocket
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: Sandivk 12C27 stainless steel
Blade Finish: Satin finish
Handle: Aluminum
Blade length: 56mm.
Blade thickness: 2.2mm.
Length closed: 82mm.
Total length: 140mm.
Weight: 48g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - Carson Flipper opening system on IKBS ball bearingsC7083 -
CRKT - CEO MicroFlipper Drop Point by Rogers - 7081 - knife
The smaller version of the popular CEO folding knife, the Microflipper combines refined style with maximum practicality. It may be small, but it's a serious contender for any job thanks to its lightweight aluminum handle and razor-sharp blade made of Sandvik 12C27™ steel.
This stylish pocket knife is available in two versions: drop-point blade with silver aluminum handle and blue coating, or sheepfoot blade with blue aluminum handle and silver coating.
* Superior performance: Sandvik 12C27™ steel for excellent edge retention.
* Smooth opening: IKBS™ ball-bearing motion allows smooth blade opening.
* Fast opening: Flipper opening system deploys the blade quickly.
* Sturdy and lightweight: Aluminum handle combines strength and minimal weight
* Easy closing: The blade can be easily closed with one hand.
* Carrying options: Adjustable ambidextrous clip for carrying in left or right pocket
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: Sandivk 12C27 stainless steel
Blade Finish: Satin finish
Handle: Aluminum
Blade length: 60mm.
Blade thickness: 2.2mm.
Length closed: 82mm.
Total length: 143mm.
Weight: 48g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - Carson Flipper opening system on IKBS ball bearingsC7081 -
Viper - Twin CN - Slipjoint by Fabrizio Silvestrelli - M390 - Micarta Natural - V6002CN - knife
Intended use: Sporting/EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Bohler M390 Microclean stainless steel, HRC 59/61
Blade treatment: Satin finish
Handle: Titanium insignia, Micarta Natural grips
Blade length: 77mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 176mm.
Thickness when closed: 10mm.
Weight: 77g.
Closure: Slipjoint
Sheath: Leather
Packaging: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio SilvestrelliV6002CN -
Viper - Lille 2 Fixed Knife by Vox - Elmax Orange/Black G10 - VT4024GBO - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: full tang in Elmax SuperClean 59/61HRC stainless steel
Blade finish: Stonewashed
Handle: G10 Two-tone
Blade length: 70mm.
Blade thickness: 3.5mm.
Total length: 170mm.
Weight: 105g.
Sheath: kydex, with UltiClip attachment clip
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesVT4024GBO -
Viper - Lille 1 Fixed Knife by Vox - Elmax Carbon Fiber - VT4022FC - knife
Intended Use: Sporting / Hunting
Production type: Industrial
Country of Production: Italy
Blade: full tang in Elmax SuperClean 59/61HRC stainless steel
Blade finish: Satin finish
Handle: Carbon Fiber
Blade length: 67mm.
Blade thickness: 3.5mm.
Total length: 167mm.
Weight: 100g.
Sheath: kydex, with UltiClip attachment clip
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesVT4022FC -
Viper - Orso 2 by Jens Anso - Dark Stonewashed Titanium - V5997TI - Knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: Italy
Blade: Sintered stainless steel Lohmann LO-QPM20-4
Blade finish: Dark Stonewashed
Handle: GR5 Dark Stonewashed Titanium with anodized titanium spacer
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 208mm.
Thickness when closed: 12mm.
Weight: 137g.
Closure: Frame Lock
Clip: anodized titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jens AnsoV5997TI -
Viper - Hug by Sacha Thiel - M390 Bronze Stars - V5990DBRS - knife
Intended Use: Sporting/EDC
Type of production: Industrial
Country of Production: Maniago - Italy
Blade: Bohler M390 Microclean stainless steel, HRC 59/61
Blade treatment: Satin finish
Handle: bronze, dark stonewashed, CNC machined, with Stars design
Blade length: 71mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 184mm.
Thickness when closed: 14mm.
Weight: 85g.
Closure: Slipjoint
Sheath: leather
Packaging: cardboard box with Viper Knives logos
Notes: Design by Sacha ThielV5990DBRS -
CRKT - Clever Girl Kukri Knife - 2710 - Machete
Intended Use: Hiking / Heavy Duty
Production Type: industrial
Blade: Full Tang in carbon steel SK-5 with Black Powder treatment
Country of Production: Taiwan
Handle: G-10
Blade Length: 196mm.
Blade thickness: 4.8mm.
Total length: 336mm.
Balance: Advanced
Weight: 402g.
Sheath: thermoplastic
Packaging: cardboard box with CRKT logos
Notes: Design by Austin McGlaunCR2710 -
CRKT - Folts Minimalist Drop Point Black - 2384K - Knife
Intended Use: Neck Knife
Production type: Industrial
Country of Production: China
Blade: Stainless steel 5Cr15MoV 55/57HRC
Blade Finish: Blacwashed
Handle: G-10
Blade Length: 55mm.
Blade thickness: 2.6mm.
Total length: 133mm.
Weight: 49g.
Scabbard: Polypropylene
Package: Cardboard box with CRKT logos.
Notes: Design dy Alan FoltsCR2384K -
Spyderco - Manbug Wharncliffe Black TiCN - SCMBKWPBK - knife
Intended Use: Sporting/EDC
Production Type: Industrial
Blade production: Japan
Blade: Stainless steel VG-10
Blade Treatment: Black TiCN - Titanium Carbonitride
Handle: FRN
Blade Length: 49mm.
Blade thickness: 2.5mm.
Length closed: 64mm.
Total lenght: 113mm.
Thickness when closed: 8mm.
Weight: 19g.
Closure: Back Lock
Clip: -
Package: cardboard case with Spyderco logos
Notes: -SMWBK -
CRKT - Carson M16-13DSFG Tan Special Forces - PRIVATE COLLECTION - pocket knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A couple of small marks on Tan-colored finish, unnoticeable
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting/TacticalProduction Type: Industrial
Country of Production: China
Blade: Stainless steel AUS-8
Blade Finish: Tan Oxide
Handle: PVD steel folders with G10 Tan grips
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 140mm.
Total length: 240mm.
Weight: 150g.
Opening: Carson Flipper system
Closure: Liner Lock with auto LAWKS security system
Clip: multi-position, removable, Black Oxide stainless steel
Packaging: cardboard box with CRKT logos
Notes: Design by Kit Carson - Carson Flipper opening systemM16-13DSFG-CP -
Spyderco - Para 3 - CPM-S45VN and G10 Digital Camo - C223GPCMO - knife
Intended Use: Sporting / Tactical
Production Type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S45VN
Blade Treatment: Stonewashed
Handle: G-10
Blade Length: 75mm.
Blade thickness: 3.7mm.
Length closed: 109mm.
Total length: 184mm.
Weight: 96g.
Closure: Compression Lock
Clip: Stainless steel
Package: cardboard box with Spyderco logos
Notes: new 2021 version with CPM-S45VN steel and Stonewashed finishC223GPCMO-S45 -
CRKT - Techliner Super Shorty - TPENBOND2 - tactical pen
The Techliner™ Super Shorty pen is built to impress with a sleek, ergonomic body and magnetic ends that attach securely to whiteboards, desk legs and workbenches so it's always within reach.
Secure cap: Magnetic ends secure the cap and attach to surfaces
Strong and lightweight: Aluminum handle combines strength with minimal weight
Visually appealing: Blue anodized body
Compact size: Easy to carry
Write anywhere: Ink cartridge developed for extreme environmental conditionsMaterial: 6061 anodized aluminum with stainless steel clip
Rear base: Magnetic
Ink: Black with pressurized Schmidt Refill
Total length: 105mm.
Diameter: 11.7mm.
Weight: 19.8gTPENBOND2 -
Spyderco - Endela - Plain Black - C243PBK - Knife
Intended use: Sporting
Type of production: industrial
Blade: Stainless steel VG-10
Blade finish: satin finish
Country of manufacture: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 87mm.
Blade thickness: 3mm.
Length closed: 119mm.
Total length: 206mm.
Thickness when closed: 15.5mm.
Weight: 88g.
Closure: Back Lock
Clip: Removable, multi-position stainless steel clip
Notes: -C243PBK -
Spyderco - Police - Half Serrated - C07PS - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Japan
Blade: Stainless steel VG-10
Blade Treatment: Satin finish
Handle: Satin-finished stainless steel
Blade length: 104mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 240mm.
Thickness when closed: 8mm
Weight: 162g.
Closure: Back Lock
Clip: multi-position, removable, stainless steel
Package: cardboard box with Spyderco logos
Notes: -C07PS -
Spyderco - Para 3 CPM-SPY27 Lightweight - C223PCBL - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Usa
Blade: Stainless steel CPM-SPY27
Blade treatment: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon)
Blade Length: 75mm.
Blade thickness: 3.8mm.
Length closed: 109mm.
Total length: 184mm.
Weight: 68g.
Closure: Compression Lock
Clip: removable and reversible, flush stainless steel clip
Package: cardboard box with Spyderco logos
Notes: Special edition stainless steel CPM-SPY27, developed by Spyderco together with Crucible and used exclusively on Spyderco products - Spyderco's main aim was to improve the VG-10 steel by increasing its composition and enriching it with nitrogen, niobium, vanadium and additional carbon by using a powder steel instead of a traditional martensitic one.C223PCBL -
CRKT - Freya by Elmer Roush - 2749 - Viking Axe
Intended Use: Sporting / Hiking
Production type: Industrial
Country of Production: Taiwan
Blade: Carbon steel 1055
Blade treatment: manganese phosphate
Handle: Walnut wood
Blade length: 88mm.
Blade thickness: 32mm.
Total length: 483mm.
Weight: 870g.
Scabbard: -
Notes: Design by Elmer RoushCR2749 -
CRKT - Berserker by RMJ Tactical - 2736 - Viking Axe
Intended Use: Sporting / Hiking
Production type: Industrial
Country of Production: Taiwan
Blade: Carbon steel 1055
Blade treatment: manganese phosphate
Handle: Walnut wood
Blade length: 118mm.
Blade thickness: 40mm.
Total length: 483mm.
Weight: 940g.
Scabbard: -
Notes: Design by by Ryan Johnson of RMJ TacticalCR2736 -
CRKT - Compano Carabiner by Bond - 9082 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: Stainless steel 5Cr15Mov
Blade finishing: Satin finish
Handle: 2Cr13 stainless steel with blackwash and bronze finish
Blade length: 37mm.
Blade thickness: 3.6mm.
Length closed: 82mm.
Total length: 117mm.
Weight: 62g.
Closure: Slipjoint
Clip: -
Package: Cardboard box with CRKT logos
Notes: Design by Mike Bond - Snap hook for attachment - Bottle openerCR9082 -
CRKT - Folts Minimalist Cleaver Blackout - 2383K - Knife
Intended Use: Neck Knife
Production type: Industrial
Country of Production: China
Blade: Stainless steel 5Cr15MoV 55/57HRC
Blade Finish: Blacwashed
Handle: G-10
Blade Length: 54mm.
Blade thickness: 2.6mm.
Total length: 129mm.
Weight: 48g.
Scabbard: Polypropylene
Package: Cardboard box with CRKT logos.
Notes: Design dy Alan FoltsCR2383K -
CRKT - Pilar III by Vox - 5317 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin finish
Handle: G10 and stainless steel with aluminum spacer
Blade length: 75mm.
Blade thickness: 3.8mm.
Length closed: 108mm.
Total length: 182mm.
Weight: 102g.
Closure: FrameLock
Clip: Stainless steel, removable
Packaging: Cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5317 -
Viper - Fearless by T. Rumici - Black DLC & Brown Micarta - VT4020CM - knife
Intended Use: Tactical / Light Utility
Production type: Industrial
Country of Production: Italy
Blade: Full tang, Sleipner steel 59/61HRC
Blade Finish: Black DLC
Handle: Micarta
Blade length: 152mm.
Blade thickness: 6mm.
Total length: 296mm.
Balance: backward
Weight: 260g.
Scabbard: Kydex with Tek-Lok multi-position locking system.
Package: Cardboard box with Viper Knives logos
Notes: Design by Tommaso Rumici - 2021 version of the Fearless model, originally produced in 2006 with N690Co stainless steel.VT4020CM -
Viper - Fearless by T. Rumici - Stone Washed & Green Micarta - VT4018CG - knife
Intended Use: Tactical / Light Utility
Production Type: Industrial
Country of Production: Italy
Blade: Full tang, Sleipner steel 59/61HRC
Blade Finish: Stone Washed
Handle: Micarta
Blade length: 152mm.
Blade thickness: 6mm.
Total length: 296mm.
Balance: backward
Weight: 260g.
Scabbard: Kydex with Tek-Lok multi-position locking system.
Package: Cardboard box with Viper Knives logos
Notes: Design by Tommaso Rumici - 2021 version of the Fearless model, originally produced in 2006 with N690Co stainless steel.VT4018CG -
CRKT - Carson M16-03BK - Bronze & Black Oxide - knife
Intended Use: Sporting / Tactical
Production Type: Industrial
Country of Production: China
Blade: Stainless steel 12C27 Sandvik
Blade treatment: Black Oxide
Handle: Stainless steel 2CR13 with nitriding in Bronze
Blade Length: 90mm.
Blade thickness: 3mm.
Length closed: 118mm.
Total length: 209mm.
Weight: 108g.
Opening: Carson Flipper system
Closure: Frame Lock
Clip: Multi-position, removable, in Black Oxide stainless steel
Package: Cardboard box with CRKT logos
Notes: Design by Kit Carson - Carson Flipper opening systemCM16-03BK -
CRKT - CEO Bamboo by Rogers - 7096YGK - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Blackwashed
Handle: Nylon reinforced with fiberglass
Blade length: 79mm.
Blade thickness: 2.2mm.
Length closed: 113mm.
Total length: 194mm.
Weight: 59g.
Closing: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - IKBS ball bearing opening system - Winner of the 2019 Blade Show as "Best Buy Of The Year"C7096YGK -
Viper - Turn knife by Silvestrelli - Titanium and Micarta - M390 steel - V5986CG - knife
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: M390 60 / 61HRC stainless steel
Blade treatment: Satin finish
Handle: titanium with micarta grips
Blade length: 80mm.
Blade thickness: 4mm.
Closed length: 107mm.
Total length: 190mm.
Thick when closed: 14mm.
Weight: 123g.
Closure: Back Lock
Clip: titanium
Sheath: -
Packaging: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio SilvestrelliV5986CG -
Viper - Dan2 by Tommaso Rumici - Bocote - V5930BC - knife
Intended use: Sports / EDC
Type of production: Industrial
Production Lama: Italy
Blade: In stainless steel N690Co 57 / 59HRC
Blade treatment: Satin
Handle: Bocote wood with internal 420C liners and anodized GR2 titanium spacer
Blade length: 73mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 182mm.
Weight: 90g.
Closure: patented Action Stopper system
Clip: Satin stainless steel
Packaging: cardboard box with Viper logos
Notes: Design by Tommaso RumiciV5930BC -
Viper - Katla by Vox - 3D Satin Titanium - V5982TI3D - knife
Katla, designed by Jesper Voxnaes, is a liner lock folding knife, which revives the Tanto profile blade with a bevel that enhances the excellent cutting qualities of the Böhler M390, hardened at 59/61 HRC.
The rotation mechanism is given by thrust bearings, and can be opened with the double peg for the thumb, or with the very fast pinball machine.
The detail that characterizes the Katla is the 3D processing of the handle on both ends of the cheek which recalls, reworking them in a modern key, the insignia of the most classic Viper models.
The flat edges and the titanium clip allow a comfortable and discreet port.
Intended use: EDC / SportsType of production: Industrial
Country of production: Italy
Blade: M390 60 / 61HRC stainless steel
Blade finish: Stonewashed
Handle: Satinized titanium 3D processing
Blade length: 82mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 198mm.
Weight: 137g.
Closure: Liner Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes - opening via Carson Flipper system on ball bearingV5982TI3D -
Viper - Katla by Vox - 3D Marbled Carbon Fiber - V5980FCM3D - knife
Katla, designed by Jesper Voxnaes, is a liner lock folding knife, which revives the Tanto profile blade with a bevel that enhances the excellent cutting qualities of the Böhler M390, hardened at 59/61 HRC.
The rotation mechanism is given by thrust bearings, and can be opened with the double peg for the thumb, or with the very fast pinball machine.
The detail that characterizes the Katla is the 3D processing of the handle on both ends of the cheek which recalls, reworking them in a modern key, the insignia of the most classic Viper models.
The flat edges and the titanium clip allow a comfortable and discreet port.
Intended use: EDC / SportsType of production: Industrial
Country of production: Italy
Blade: M390 60 / 61HRC stainless steel
Blade finish: Satin
Handle: Carbon fiber with 3D processing
Blade length: 82mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 198mm.
Weight: 105g.
Closure: Liner Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes - opening via Carson Flipper system on ball bearingV5980FCM3D -
Viper - Drop Montone by Fabrizio "Silvester" Silvestrelli - V5700MO knife
Intended use: sportsman / gentleman
Type of production: industrial
Lama production: Italy
Blade: Sandvik 12C27 stainless steel
Blade treatment: -
Handle: ram horn, with liners embedded in stainless steel
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 75mm.
Thick when closed: 12mm.
Total length: 125mm.
Balancing: -
Weight: 60g.
Closure: Liner Lock
Clip: -
Sheath: black leather case
Notes: design by Fabrizio SilvestrelliV5700MO -
Viper - Berus 2 by T. Rumici - Green Canvas Micarta - VT4014CG - knife
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: full tang in stainless steel M390 59 / 60HRC
Blade treatment: Stonewashed
Handle: Micarta canvas
Blade length: 62mm.
Blade thickness: 4mm.
Total length: 154mm.
Weight: 95g.
Sheath: in Kydex
Packaging: cardboard box with Viper logos
Notes: design by Tommaso RumiciVT4014CG -
Viper - Berus 1 by T. Rumici - Green Canvas Micarta - VT4012CG - knife
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: full tang in stainless steel M390 59 / 60HRC
Blade treatment: Stonewashed
Handle: Micarta canvas
Blade length: 67mm.
Blade thickness: 4mm.
Total length: 154mm.
Weight: 95g.
Sheath: in Kydex
Packaging: cardboard box with Viper logos
Notes: design by Tommaso RumiciVT4012CG -
Viper - Berus 2 by T. Rumici - Marbled Carbon Fiber - VT4014FCR - knife
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: full tang in stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: Marbled carbon fiber
Blade length: 67mm.
Blade thickness: 4mm.
Total length: 154mm.
Weight: 95g.
Sheath: in Kydex
Packaging: cardboard box with Viper logos
Notes: design by Tommaso RumiciVT4014FCR -
Viper - Berus 1 by T. Rumici - Marbled Carbon Fiber - VT4012FCR - knife
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: full tang in stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: Marbled carbon fiber
Blade length: 67mm.
Blade thickness: 4mm.
Total length: 154mm.
Weight: 95g.
Sheath: in Kydex
Packaging: cardboard box with Viper logos
Notes: design by Tommaso RumiciVT4012FCR -
Spyderco - Emphasis - C245GP - folding knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade finish: Satin finish
Handle: Stainless steel and G-10
Blade length: 91mm.
Blade thickness: 3mm.
Length closed: 122mm.
Total length: 211mm.
Weight: 147g.
Closing system: Liner Lock
Clip: Removable and multi-position, in stainless steel
Packaging: cardboard box with Spyderco logos
Note: -C245GP -
Spyderco - Insistent - C246GP - folding knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade finish: Satin finish
Handle: Stainless steel and G-10
Blade length: 63mm.
Blade thickness: 3mm.
Length closed: 94mm.
Total length: 155mm.
Weight: 113g.
Closing system: Liner Lock
Clip: Removable and multi-position, in stainless steel
Packaging: cardboard box with Spyderco logos
Note: -C246GP -
CRKT - Tuna Knife by Burnley - 2520 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr14Mov 58/60 HRC stainless steel
Blade treatment: Blackwashed
Handle: G10 and Blackwashed stainless steel
Blade length: 82mm.
Blade thickness: 3.7mm.
Length closed: 114mm.
Total length: 195mm.
Weight: 105g.
Closing: FrameLock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Lucas BurnleyC2520 -
CRKT - Piet by Vox - 5390 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Satin finish
Handle: Nylon reinforced with fiberglass with anodized titanium spacer
Blade length: 68mm.
Blade thickness: 3.3mm.
Length closed: 95mm.
Total length: 164mm.
Weight: 71g.
Closing: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5390 -
Spyderco - Dragonfly 2 Wave - Emerson Opener - C28GYW2 - knife
Intended use: sports
Type of production: Industrial
Country of production: Japan
Blade: VG-10 stainless steel
Blade treatment: Satin finish
Handle: FRN with stainless steel drowned folders
Blade length: 57mm.
Blade thickness: 2.5mm.
Closed length: 84mm.
Total length: 141mm.
Weight: 37g.
Opening: via Emerson Wave system or through the "SpyderHole" blade recess
Closure: Back Lock
Clip: stainless steel, removable and reversible
Sheath: -
Packaging: Cardboard box with Spyderco logos
Note: -C28GYW2 -
Viper - Belone knife by Vox - Carbon Titanium - frame lock - V5970TIFC - knife
In designing the Belone, the Danish Jesper Voxnaes started from typical lines of the Italian regional tradition, perfectly reworked according to his modern and minimalist style that made him famous all over the world. The result is a light and tapered folding knife, embellished with refined details, such as the holes in the back of the handle.
The Böhler M390 Microclean steel gives the Belone excellent cutting properties, and the ball bearings make it the opening with the very fast pinball machine, perfectly integrated into the overall design. The handle, with its well-kept ergonomics, has an anodized titanium structure, enclosed in thin carbon fiber folders.
The Belone clip is attached to the spacer so that the knife disappears completely into the pocket, maintaining maximum discretion.Intended use: Gentleman / EDC
Type of production: Industrial
Lama production: Italy
Blade: Stainless steel M390 60-61 hrc
Lama treatment: Stonewashed
Handle: Titanium and carbon fiber
Blade length: 85mm.
Blade thickness: 3.4mm.
Length closed: 114mm.
Total length: 200mm.
Thick when closed: 11.3mm.
Balancing: -
Weight: 78g.
Closure: Frame Lock
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesV5970TIFC