Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Roselli - Carpenter knife full tang - R110F - artisan knife
Roselli's version of the ultimate outdoor knife is now also available in a full tang model with hidden steel (where the blade runs through the entire handle) to give you better support and balance when you use it intensely. All Roselli full tang knives are long-lasting, sturdy and perfect for heavy-duty use.
The design is inspired by traditional carving knives and, thanks to its handy size, can be adapted anywhere. The knife is also effective as a hunting knife and the size of the blade makes it suitable for hunters who prefer to hunt smaller game.
This new full tang knife features a carbon steel blade and a stabilized birch handle, featuring an eyelet hole for strap attachment. Wood stabilization is the process of strengthening the wood so that it no longer reacts to changes in humidity, which cause the wood to shrink or swell.
Intended use: Hunting/Sports
Type of production: artisanal
Blade: W75 60/62HRC carbon steel
Blade production: Finland
Handle: Arctic Birch
Blade length: 85mm.
Blade thickness: 3mm.
Closed length: -
Total length: 195mm.
Balancing: -
Weight: 145g.
Closure: -
Clips: -
Sheath: light brown leather
Note: -RO-R110F -
Giant Mouse - ACE Sonoma V2 - Elmax & Green Canvas Micarta - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used.
* Condition: Very good condition, with a few small marks on blade and handle.
* Commercially available: Discontinued
* Sharpening: Professionally re-sharpened.
* Marks on blade: Small, unnoticeable scratches on the tip of the blade.
* Marks on handle: A small mark near the clip housing.
* Packaging: Yes
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory
Production Type: Industrial
Country of Production: China (by Reate Knives)
Blade: Elmax stainless steel
Blade finish: satin finish
Handle: green cavnas micarta with brass spacer
Blade length: 87mm.
Blade thickness: 3.5mm.
Length closed: 114mm
Total length: 203mm.
Thickness when closed: 14mm.
Weight: 85g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: cardboard box with Giant Mouse logos
Notes: discontinued knife, winner of the "2023 BEST EDC CHAMPION" award by CarryologyGM-ACESO-CP -
William Henry - Signature Collection B12-FTD - Damascus ZDP-189 and Titanium - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Out of production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: some minor scuffs and hairlines on the right side
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratoryIntended Use: Collection
Production type: MidTech
Country of manufacture: USA
Blade: stainless rolled damascus with wave design, 45-ply and ZDP-189 cutting edge
Blade finish: -
Handle: titanium with blue anodized and topaz set
Blade length: 79mm.
Blade thickness: 2.3mm.
Length closed: 100mm.
Total length: 180mm.
Weight: 57g.
Closure: Button Lock with embedded topaz
Sheath: leather, with stainless steel clip
Packaging: cardboard box with William Henry logos and warranty certificate
Notes: previously purchased knife, from a private collectionWH-BF12-CP -
Livio Montagna - 2014 Hunting Knife - RWL34 & Sambar Amber - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No.
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratoryIntended use: hunting / collection
Type of production: handcrafted
Country of production: Italy
Blade: stainless steel RWL34 hardened to 59/60 HRC
Blade finish: satin finish
Handle: amber Sambar stag with 416 stainless steel guard and pommel
Blade length: 107mm.
Blade thickness: 3.5mm.
Total length: 220mm.
Weight: 181g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.AP-MONT-CPSA -
Tommy Lee - Clip Point - Damascus & Giraffe Bone - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 1990 model, in like-new condition.
* Commercially available: Unique specimen, entirely handmade; artisan passed away in 2013
* Sharpening: Factory sharpening, can be improved.
* Marks on blade: A few small oxidation marks on handle.
* Marks on handle: A few small marks on steel bolsters due to time.
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks from time
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: Collection/GentlemanType of production: Handcrafted
Country of Production: USA
Blade: full tang, handcrafted carbon damascus steel
Handle: stainless steel heads and giraffe bone handles
Blade length: 104mm
Blade thickness: 3mm.
Total length: 196mm.
Weight: 94g.
Sheath: Leather, for belt or boot, with steel clip for attachment
Packaging: -
Notes: rare handcrafted knife made in 1990 by well-known American knife maker Tommy LeeFC-TLEE-DG-CP -
Frank Centofante - SL-10 - ATS34 & Micarta #049 - PRIVATE COLLECTION - handmade knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 12/1990 model, overall in good condition, with a few small marks from time
* Commercially available: Limited edition, numbered model, made entirely by hand; craftsman passed away in 2009
* Sharpening: Re-sharpened, a few small marks on blade due to sharpening
* Marks on blade: A few small marks
* Marks on handle: A few hairlines on the bolsters and a small dent on the left micarta handle.
* Box: -
* Scabbard: Suede leather case.
* Manuals, Certificates and Warranties: Certificate of authenticity with date of manufacture and craftsman's signature.
* Checked and Certified by our in-house laboratoryIntended Use: Collection/Gentleman
Type of production: Handcrafted
Country of Production: USA
Blade: stainless steel ATS34
Blade finish: satin finish
Handle: Stainless steel and Micarta
Blade length: 83mm
Blade thickness: 2.5mm.
Length closed: 108mm.
Total length: 189mm.
Thickness when closed: 8mm.
Weight: 99g.
Closure: Back Lock
Clip: -
Sheath: Suede leather pouch
Packaging: -
Notes: rare handcrafted knife made in December 1990 by noted U.S. knife maker Frank Centofante who passed away in 2009, serial number #049FC-SL10-CP -
Zero Tolerance - Ken Onion Flipper Knife - ZT0200ST - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased
Condition: in excellent condition
Available in commerce: NO
Sharpening: Original
Marks on blade: YES - small marks
Marks on handle: NO
Packaging: YES, original box
Checked and Certified by our internal laboratory
Intended use: Tactical/MilitaryType of production: Industrial
Country of production: USA
Blade: In stainless steel 154CM
Blade finish: Tungsten DLC Coating
Handle: G10 with stainless steel liners
Blade length: 101mm.
Blade thickness: 4mm.
Closed length: 132mm.
Total length: 222mm.
Thickness when closed: 21mm.
Weight: 225g.
Closure: Liner Lock
Clip: Removable, reversible and multi-position, in stainless steel
Packaging: -
Notes: Design by Ken Onion - Opening system through Carson Flipper system - Knife out of production, withdrawn from private collection, like new, without boxAP-ZT0200ST -
Roselli - Hunting Nalle knife - UHC steel - RW200A - handcrafted knife
This handmade Finnish hunting and outdoor knife is an exclusive version of the classic "Hunting" model and has a unique reindeer horn shape and decoration.
It was originally developed as a knife for moose hunters in Finland and quickly became the perfect companion for working larger game such as moose, wild boar and deer. The design and profile of the blade are excellent for skinning game.
The blade is made of UHC (Ultra High Carbon) steel and the handle decorated with reindeer antlers is curly birch, stained and coated with linseed oil, which ensures a firm grip, even when wet. UHC steel makes the knife extremely sharp for a long time.
Comes with a handcrafted sheath of dark vegetable tanned Finnish leather in combination with stained curly birch, for a unique look. Made, sharpened in collaboration with knife maker Kari Ohtonen.
Intended use: Hunting/Sports/Collection
Type of production: artisanal
Blade: in UHC 62/63HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 105mm.
Blade thickness: 3mm.
Closed length: -
Total length: 235mm.
Balancing: -
Weight: 130g.
Closure: -
Clips: -
Sheath: Vegetable tanned leather with reindeer antlers
Note: -RO-RW200A -
Roselli - Hunting and Grandmother knives - pair - R180 - handcrafted knife
When one isn't enough..., this Double Sheath Set, is the two knife configuration that allows you to easily carry both the "Hunting Knife" and the "GrandMother" knife.
Both blades of the two knives are made of forged carbon steel and the handles are made of curly birch, coated with linseed oil, which ensure a firm grip, even when wet. Comes with a handcrafted double sheath of light vegetable tanned Finnish leather, tailored to fit both knives
Roselli - Hunting Knife - R100 - Artisan Knife
Intended use: Hunting/Sports
Type of production: artisanal
Blade: W75 60HRC carbon steel
Lama production: Finland
Handle: Birch
Blade length: 105mm.
Blade thickness: 3mm.
Closed length: -
Total length: 227mm.
Balancing: -
Weight: 120g.
Closure: -
Clips: -
Sheath: in worked and hand-stitched leather
Note: -Roselli - Grandmother Knife - R130 - Artisan Knife
Intended use: Hunting/Sports
Type of production: artisanal
Blade: W75 60/62HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 55mm.
Blade thickness: 3mm.
Closed length: -
Total length: 150mm.
Balancing: -
Weight: 52g.
Closure: -
Clips: -
Sheath: brown leather
Note: -RO-R180 -
Roselli - Carpenter's knife - R110 - craft knife
This handmade Finnish knife is Roselli's version perfect for outdoor use. The design is inspired by traditional carving knives and thanks to its handy size, you can fit it anywhere. The knife also works well as a hunting tool and the size of the blade makes it suitable for hunters who prefer to hunt smaller game.
The blade is made of forged carbon steel, and the handle is curly birch, coated with linseed oil, which ensures a firm grip, even when wet. Comes with a handcrafted sheath of vegetable tanned Finnish leather
Intended use: Hunting/Sports
Type of production: artisanal
Blade: W75 60/62HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 85mm.
Blade thickness: 3mm.
Closed length: -
Total length: 195mm.
Balance: -
Weight: 72g.
Closure: -
Clip:-
Sheath: brown leather
Note: -RO-R110 -
Roselli - Grandfather knife - R120 - handcrafted knife
This handmade Finnish hunting knife is the shorter version of the classic "hunting knife". Extremely popular model due to its handy size which makes it easy to carry anywhere.
The slightly curved and short blade is particularly useful and comfortable for hunting use.
The blade is made of forged carbon steel, and the handle is made of curly birch, coated with linseed oil, which ensures a firm grip, even when wet. Comes with a handcrafted sheath of vegetable tanned Finnish leather.
Intended use: Hunting/Sports
Type of production: artisanal
Blade: W75 60HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 70mm.
Blade thickness: 3mm.
Closed length: -
Total length: 180mm.
Balancing: -
Weight: 95g.
Closure: -
Clips: -
Sheath: in worked and hand-stitched leather
Note: -RO-R120 -
Roselli - Hunting knife - R100 - handcrafted knife
The "first" Roselli, with a minimalist design dating back to 1976. For over 45 years it has been performing in the wild nature and casually tackling hunting, fishing and life in the open air.
This handmade Finnish hunting knife was originally developed as a hunting knife for moose hunters in Finland and quickly became the perfect companion for handling larger game such as moose, wild boar and larger deer. The design and profile of the blade make it excellent for skinning game.
The blade is made of forged carbon steel, and the handle is curly birch, coated with linseed oil, which ensures a firm grip, even when wet. Comes with a handcrafted sheath of vegetable tanned Finnish leather.
Intended use: Hunting/Sports
Type of production: artisanal
Blade: W75 60HRC carbon steel
Lama production: Finland
Handle: Birch
Blade length: 105mm.
Blade thickness: 3mm.
Closed length: -
Total length: 227mm.
Balancing: -
Weight: 120g.
Closure: -
Clips: -
Sheath: in worked and hand-stitched leather
Note: -RO-R100 -
Roselli - UHC carpenter's knife - RW210 - craft knife
This handmade Finnish knife is Roselli's version of the ultimate hiking knife. The design is inspired by traditional carving knives and thanks to its handy size, you can fit it anywhere. The knife also works well as a hunting knife and the size of the blade makes it suitable for hunters who prefer hunting smaller game.
The blade is made of UHC (Ultra High Carbon) steel and the handle is made of heat-treated birch, coated with linseed oil, which ensures a firm grip, even when wet. The UHC steel makes the knife extremely sharp and keeps its sharpness for a long time. Comes with a handcrafted dark vegetable tanned Finnish leather sheath.
Intended use: Hunting/Sports
Type of production: artisanal
Blade: in UHC 64/66HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 85mm.
Blade thickness: 3mm.
Closed length: -
Total length: 190mm.
Balancing: -
Weight: 65g.
Closure: -
Clips: -
Sheath: brown leather
Note: -RO-RW210 -
Boker - Annual Damascus 1991 Knife - Limited Edition - PRIVATE COLLECTION - Knife
The Böker Annual Damascus 1991 knife is not just a tool, but a true investment of value, a treasure destined not only for knife lovers but for anyone who appreciates the art and tradition behind such a sought-after object.
This limited piece, part of a private collection and now out of production, represents a unique specimen, numbered and limited to only 999 pieces worldwide.
WITHDRAWN FROM PRIVATE COLLECTION
- Type: Previously Purchased
- Condition: As good as new
- Available in the market: Out of production, numbered and limited to 999 specimens
- Sharpening: Factory sharpening
- Blade marks: No
- Handle marks: No
- Box: Present
- Sheath: Not applicable
- Manuals, Certificates, and Warranties: Present
- Checked and Certified by our internal laboratory
Use Destination: EDC/Gentleman/Collection
Type of production: Industrial
Country of production: Germany - Solingen
Blade: in 300-layer artisanal Damascus steel
Handle: stabilized root wood
Blade length: 80mm
Blade thickness: 2mm
Total length: 186mm
Weight: 136g
Closure: back lock
Packaging: Wooden box with paper certificate and warranty
Note: numbered and limited specimen, as good as new, withdrawn from private collection
BO-1991DC -
Strider Knives - Fixed Tanto Tiger Stripe knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Early 2000s knife, previously purchased.
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Factory.
* Marks on blade: Small abrasions given by being placed in Kydex sheath.
* Marks on handle: None
* Box: -
* Scabbard: Present
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: TacticalProduction type: MidTech
Country of Production: USA
Blade: full tang stainless steel CPM-S30V
Finish: Tiger Stripe
Handle: Paracord
Blade length: 100mm.
Blade thickness: 4.5mm.
Total length: 195mm.
Weight: 125g.
Sheath: thermoformed kydex, with Tek-Lok multi-position attachment
Notes: previously purchased knife, from private collectionST-FTTS-CP -
Dietmar Kressler - Integral Drop Point - K190 & Snakewood - PRIVATE COLLECTION - craft knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 1989 model, in like-new condition.
* Commercially available: Unique specimen, entirely handmade
* Sharpening: Factory sharpened.
* Marks on blade: None
* Marks on handle: None
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks of time.
* Manuals, Certificates and Warranties: Warranty certificate issued by the Italian dealer of the time, not stamped or signed.
* Checked and Certified by our in-house laboratoryIntended Use: Collection/Gentleman
Type of production: Handcrafted
Country of Production: Germany
Blade: Bohler K190 powder steel at 62HRC
Blade finish: horizontal satin finish
Handle: integral, from solid, with snakewood grips
Blade length: 83mm
Blade thickness: 4mm.
Total length: 187mm.
Weight: 139g.
Sheath: leather, belt
Packaging: -
Notes: rare handcrafted knife made in 1989 by renowned German cutler Dietmar KresslerFC-KRES-SW-CP -
Chris Reeve - Ti-Lock Stone Washed - NOS Full Set - PRIVATE COLLECTION - folding knife
NOS FULL SET KNIFE, NEW FROM STOCK
* Type: 2001 NOS new old stock - New from stock.
* Condition: Like new, never taken out of original packaging.
* Commercially available Out of production
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.
The Ti-Lock mechanism was originally designed to isolate the locking mechanism from the handle of the knife so that it can offer greater freedom of design. Totally ambidextrous, the Ti-Lock is not meant to be a mere exercise in style, but should be understood as a mechanical innovation and a solid and reliable testament to the passion of Chris Reeve and Grant and Gavin Hawk.
Intended Use: Sporting/Collection
Type of production: Semi-manufactured
Country of Production: USA
Blade: CPM-S35VN 58/59HRC stainless steel
Blade Treatment: Stonewashed
Handle: Titanium 6AI4V Stone Washed
Blade Length: 82.5mm.
Blade Thickness: 3.2mm.
Length closed: 100mm.
Total length: 182.5mm.
Weight: 85g.
Closure: Ti-Lock titanium 6AI4V
Clip: Titanium 6AI4V
Packaging: Cardboard box with Chris Reeve logos, certificates
Notes: Design by Grant and Gavin Hawk - NOS knife, new from stock - Includes box and certificatesCR-TILSW-CP -
Al-Mar - SERE Attack 3003/B - PRIVATE COLLECTION - vintage knife
Rare knife produced by the Japanese Al-Mar in the late 80s and early 90s, now out of production and no longer available. Knife withdrawn from private collection and out of production - Knife slightly used, with small shallow marks on the left side of the blade, original leather sheath never used and never worn, including box (not original). The rubber grip has a slight break, with a small missing part, in the upper right rear part, near the corrugation. - Checked, re-sharpened and certified by our internal Collini Cutlery laboratory.
Intended use: Collection / Tactical
Type of production: Industriae
Country of production: Japan, Seki
Blade: AM-6 stainless steel
Blade treatment: satin finish
Handle: in rubber, with brass spacers
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 150mm
Total length: 255mm.
Weight: 320g.
Closing: Back Lock
Sheath: leather, new
Packaging: cardboard box, with Japanese logos, but not original Al-Mar
Notes: withdrawn from private collection - used - re-sharpened - with "DEOPPRESSOLIBER" logo on the left headAM-3002DOL -
Boker - 1992 Vintage Trapper - Wildlife Series Limited Edition - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Out of production, numbered and limited edition
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Small rubbing marks on the Alpacca heads
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and certified by our in-house laboratory
Intended use: EDC/Gentleman
Production type: Industrial
Country of manufacture: Germany - Solingen
Blade: Stainless steel 420
Blade treatment: Mirror polished
Handle: Coloured bone
Blade length: 83mm.
Blade thickness: 2mm.
Total length: 186mm.
Weight: 72g.
Closure: SlipJoint (without blade lock)
Packaging: Cardboard box with Boker Wildlife Series 1992 logos, paper certificate and warranty
Notes: Numbered and limited edition, like new, taken from a private collectionBO-1992WS -
Boker - Bud Nealy MCS Cocobolo Knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like New
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present - Original
* Scabbard: Present - Original, with all accessories included.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / Neck Knife / CQD
Country of Production: Germany
Blade: full tang in 440C 58/60HRC stainless steel
Handle: cocobolo wood
Blade length: 85mm.
Blade thickness: 3mm.
Total length: 185mm.
Balance: Backward
Weight: 90g.
Clip: MCS2 System that allows 9 different carry options, all explained in the manual
Sheath: Ultra flat Kydex sheath with additional magnetic retention
Notes: knife withdrawn from private collection, like new
Biographical Note:
Bud Nealy is universally recognized as one of the best knifemakers in the world. He is also known as the inventor of the MCS (Multi Concealment Sheath) system that allows the knife to be placed securely in any type of position. And it is because of these two requirements that every day hundreds of his MCS systems are used by police officers, undercover agents, S.W.A.T. and R.A.I.D. members, U.S. embassy guards, Bodyguards and Air Rangers.BO-BNMCS-CP -
Livio Montagna - Tribute BayleyKnife S4 Bear Grylls Survival - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like New
* Commercially available No.
* Sharpening: Original
* Marks on blade: NO
* Marks on handle: NO
* Packaging: NO
* Scabbard: Leather, handcrafted and hand-stitched
* Manuals, Certificates and Warranties: YES
* Checked and Certified by our in-house laboratory
Knife handcrafted by Accredited Member C.I.C. (Corporazione Italiana Coltellinai) Livio Montagna.
Intended use: bushcraft / utility
Type of production: handcrafted
Country of manufacture: Italy
Blade: RWL34 steel
Blade finish: satin-finished
Handle: micarta with 416 stainless steel cotter
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 210mm.
Weight: 230g.
Scabbard: handcrafted, leather, hand-stitched
Packaging: unwrapped, comes with certificate of authenticity and warranty
Notes: previously purchased knife, from a private collection, "homage" to the Bayley S4 knife, designed and handcrafted by Rob Bailey, famous for being used by Bear Grylls during his first TV appearances, before he made business deals with Gerber.AP-BAYS4-LM -
Livio Montagna - Hunter knife - M390 - Stabilized Beech - PRIVATE COLLECTION - handmade knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available No
* Sharpening: Original
* Marks on blade: NO
* Markings on handle: NO
* Packaging: NO
* Sheath: In leather, handcrafted
* Manuals, Certificates and Warranties: YES
* Checked and Certified by our internal laboratoryKnife handcrafted by Master C.IC. (Italian Corporation of Cutlers) Livio Montagna.
Type of production: artisanal
Country of production: Italy
Blade: M390 steel at 60/61 HRC
Blade finish: satin finish
Handle: in stabilized beech wood
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 215mm.
Weight: 185g.
Sheath: handmade, in leather, hand-stitched
Packaging: NO
Note: -AP-HUNTER-FA -
Roberto Bernini - Fixed Hunter in Sambar Deer - PRIVATE COLLECTION - handcrafted hunting knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available On commission
* Sharpening: Factory.
* Marks on blade: A couple of imperceptible marks on the satin finish, presumably from being inserted in the scabbard
* Marks on handle: No.
* Packaging: Zip pouch, original
* Scabbard: Leather, handcrafted, original
* Manuals, Certificates and Warranties: Certificate of guarantee and authenticity present.
* Checked and Certified by our in-house laboratory
Intended use: hunting / collection
Type of production: handcrafted
Country of production: Italy
Blade: stainless steel ATS-34 60HRC
Blade finish: satin finish
Handle: deer Sambar with stainless steel 416 guard
Blade length: 87mm.
Blade thickness: 4mm.
Total length: 198mm.
Weight: 80g.
Sheath: handcrafted, leather, for vertical belt carry
Packaging: zippered case and certificate of authenticity and guarantee from the Corporazione Italiana Coltellinai
Notes: Designed and made entirely by hand in Italy by Master CIC Roberto Bernini, specimen dated November 2010 - Previously purchased, from private collectionAP-BER-HCV -
Chris Reeve - Ti-Lock Stone Washed - PRIVATE COLLECTION - folding knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Absent
* Scabbard: Absent
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory
The Ti-Lock mechanism was originally designed to isolate the locking mechanism from the handle of the knife so that it can offer greater freedom of design. Totally ambidextrous, the Ti-Lock is not meant to be a mere exercise in style, but should be understood as a mechanical innovation and a solid and reliable testament to the passion of Chris Reeve and Grant and Gavin Hawk.
Intended Use: Sporting/Collection
Type of production: Semi-manufactured
Country of Production: USA
Blade: CPM-S35VN 58/59HRC stainless steel
Blade Treatment: Stonewashed
Handle: Titanium 6AI4V Stone Washed
Blade Length: 82.5mm.
Blade Thickness: 3.2mm.
Length closed: 100mm.
Total length: 182.5mm.
Weight: 85g.
Closure: Ti-Lock titanium 6AI4V
Clip: Titanium 6AI4V
Packaging: -
Notes: Design by Grant and Gavin Hawk - Knife from a private collection.AP-0037SW -
Roselli - Grandfather knife - UHC steel - RW220 - handcrafted knife
This handmade Finnish hunting knife is the shorter version of the classic "hunting knife". Extremely popular model due to its handy size which makes it easy to carry anywhere.
The slightly curved and short blade is particularly useful and comfortable for hunting use.
The blade is made of UHC (Ultra High Carbon) steel and the handle is made of heat-treated curly birch, coated with linseed oil, which ensures a firm grip, even when wet. The UHC steel gives the knife a very long edge life - please note that the hard UHC steel is not suitable for penetrating bone or other hard materials. Comes with a handcrafted sheath of dark vegetable tanned Finnish leather.
Intended use: Hunting/Sports
Type of production: artisanal
Blade: in UHC 62/63HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: -
Total length: 200mm.
Balancing: -
Weight: 100g.
Closure: -
Clips: -
Sheath: in worked and hand-stitched leather
Note: -RO-RW220 -
Francesco Pachì - Winnebago custom knife - Ironwood and Fossil Ivory - PRIVATE COLLECTION
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Condition: in mint condition - year of manufacture 1997
* Sharpening: Factory
* Marks on blade: None
* Signs on handle: None
* Scabbard: Present - Original
* Manuals, Certificates and Warranties: without certificate
* Checked and Certified by our internal laboratoryIntended use: Collection
Type of production: Handcrafted unique piece by Francesco Pachì with Scrimshaw (wolf's head) by Mirella Pachì
Blade production: Italy
Blade: ATS-34 stainless steel
Handle: in desert ironwood with insert in mammoth fossil ivory with handcrafted scrimshaw depicting a wolf's head
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 235mm.
Weight: 215g.
Sheath: in handmade leather
Packaging: Pachì cordura pocket
Note:AP-WIN-FP -
Quartermaster - QSE-5 Mr. Roper - Limited Edition - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued since 2014, limited edition made of only 300 pieces.
* Sharpening: Factory sharpened, improvable
* Marks on blade: None
* Marks on handle: Very small abrasions on titanium and hardware.
* Box: Present - Original
* Scabbard: Present - Original.
* Manuals, Certificates and Warranties: Certificate with date of manufacture, serial number and signature.
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / EDC
Production Type: Industrial
Country of Production: USA
Blade: sintered stainless steel CPM-154CM
Blade Finish: Stone Washed
Handle: Microblasted Titanium
Blade Length: 76mm.
Blade thickness: 4.7mm.
Total length: 190mm.
Thickness when closed: 12mm.
Weight: 115g.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Quartermaster logos
Notes: Knife withdrawn from a private collection, previously purchased - Limited edition specimen of only 300, individually numbered on blade and box (knife number #159)QTR-QSE5-CP -
Sergio Consoli - Folder Liner Lock - PRIVATE COLLECTION - holographic resin handle - N ° 480
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production single piece produced in 2019
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box: -
* Sheath: no
* Manuals, Certificates and Warranties: original
* Checked and certified by our internal laboratoryIntended use: Collection
Type of production: Artisan by CIC Master Sergio Consoli
Production Lama: Italy
Blade: full-tang stainless steel RWL-34 60 / 61HRC
Blade treatment: -
Handle: holographic resin handle with titanium spacer
Blade length: 85mm.
Blade thickness: 4mm.
Closed length: 120mm.
Total length: 205mm.
Thick when closed: 19mm.
Balancing: -
Weight: 132g.
Closure: Liner Lock
Clip: -
Sheath: -
Packaging:
Notes: Handmade by Master Sergio Consoli - knife number 480 made in 2019CON-480 -
Zero Tolerance - ZT0460 - Sinkevich - Bronze Carbon Fiber - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued as of the end of 2021
* Sharpening: Factory sharpened, like new
* Marks on blade: None
* Marks on handle: None
* Box: Absent
* Scabbard: -
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory
Intended Use: Sporting/Tactical
Production Type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S35VN
Blade treatment: Stonewash
Handle: Bronze-colored carbon fiber and Titanium
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 191mm.
Weight: 65g.
Closure: Framelock
Clip: Removable, stainless steel
Notes: KVT opening on ball bearings - Carson Flipper opening system - Design by SinkevichZT0460-CP -
SOG - The Tomcat knife - Large - PRIVATE COLLECTION - knife
The SOG Tomcat is one of SOG's largest folding knives. It features a 5mm thick blade, making it a heavy-duty folding knife, and while it weighs more than the average folding knife, it will withstand heavy use. The SOG Tomcat also won the "Overall Knife of the Year" award in 1988, one of the company's first awards, for its outstanding design.
It is one of the most collected SOG folding knives
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Conditions: Like new
* Commercially available: Out of production, in production between 1986 and 2002
* Sharpening: Factory
* Marks on blade: No
* Marks on the handle: No
* Box: Yes, original, in perfect condition
* Sheath: original in cordura
* Manuals, Certificates and Warranties: present in the package
* Checked and certified by our internal laboratoryIntended use: Collection
Type of production: Industrial
Production Lama: Japan
Blade: 440C stainless steel
Blade treatment: -
Handle: Stainless steel and Kraton
Blade length: 90mm.
Blade thickness: 4mm.
Closed length: 116mm.
Total length: 210mm.
Thick when closed: -
Balancing: -
Weight: 216g.
Closure: back-Lock
Clip: -
Sheath: Nylon
Packaging: Cardboard box with SOG logos
Note:AP-TOM-SOG -
Klotzli - 03-C Collection Series - Walker design - Titanium - PRIVATE COLLECTION - ATS-34 - knife
Knife withdrawn from a private collection, in like new condition with original box and certificate - Model dating back to the late 90s "made by Klotzli based on a design by the famous American designer Michael Walker. Knife that combines two qualities that are difficult to match, especially in those years; lightness and sturdiness Elegant gentleness, easy to open and close with one hand thanks to the Liner-Lock system invented by Walker himself.
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Available on the market Out of production
* Sharpening: Factory, perfect
* Marks on blade: No
* Marks on the handle: no
* Box: Present
* Sheath: in leather
* Manuals, Certificates and Warranties: Present
* Checked and certified by our internal laboratoryIntended use: sports / collection
Type of production: industrial
Country of production: Switzerland
Blade: ATS-34 stainless steel
Blade finish: Satin finish
Handle: Titanium
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 110mm.
Total length: 207mm.
Weight: 92g.
Closure: LinerLock
Clip: -
Notes: Design by Michael WalkerAP-KLO-03C -
Crusader Forge - VIS-T Tactical MK IV Titanium - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued
* Sharpening: Factory sharpened, perfect
* Marks on blade: No
* Marks on handle: Very small abrasion sengi on a couple of corners and on the clip.
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Collection/Tactical
Type of production: Midtech (semi-craft)
Country of manufacture: USA
Blade: stainless steel CPM-S30V/CF2 triple hardened 59/61HRC
Blade finish: Stone Washed
Handle: Titanium 6AL4V
Blade Length: 90mm.
Blade thickness: 5mm.
Length closed: 133mm.
Total length: 222mm.
Thickness when closed: 10.7mm.
Weight: 307g.
Closure: Frame Lock
Clip: Ttanium 6AL4V
Packaging: Cardboard box with Crusader Forge logos - certificate of guarantee and authenticity with knife data sheet
Notes: knife withdrawn from private collectionCF-VISTT-CP -
Jim Burke - RockStar Titanium Folder - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available in hard-to-find trade.
* Sharpening: Original
* Marks on blade: no
* Marks on handle: small abrasions on clip.
* Box: -
* Scabbard: - -
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / Collection
Type of production: Midtech (semi-industrial)
Country of manufacture: USA
Blade: Stainless steel CPM-154CM
Blade treatment: Dual tone: stonewashed and satin-finished
Handle: stonewashed titanium
Blade length: 80mm.
Blade thickness: 3.2mm.
Length closed: 112mm.
Total length: 195mm.
Thickness when closed: 10mm.
Weight: 130g.
Closure: Framelock
Clip: Removable, titanium
Notes: knife withdrawn from private collectionJB-RF-CP -
Mikkel Willumsen - Custom Titanium Frame Lock - PRIVATE COLLECTION - handcrafted knife
Interesting handcrafted lockable "One of a Kind" made in 2008 by established Danish knife maker Mikkel Willumsen
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Overall in very good condition
* Commercially available Unique specimen made in 2008.
* Sharpening: Original, with a few small marks from use.
* Marks on blade: A couple of small marks.
* Marks on handle: A couple of small abrasions on titanium folder.
* Box: -
* Scabbard: - -
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: Collection
Production type: custom
Country of production: Denmark
Blade: handcrafted and beveled, stainless steel RWL-34
Blade treatment: dual tone: stone washed and handcrafted satin finish
Handle: micropallinated titanium and carbon fiber
Blade length: 107mm.
Blade thickness: 4mm.
Length closed: 137mm.
Total length: 245mm.
Thickness when closed: 15mm.
Weight: 215g.
Closure: Framelock
Clip: Removable, anodized titanium
Notes: Made entirely by hand by Mikkel Willumsen - Ball bearing openingMW-CP -
Spyderco - Police knife Steel C07P - VG10 steel - PRIVATE COLLECTION - knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Rare model of the Police 2 - years 2002 - 2006
* Condition: in like new condition
* Commercially available: difficult to find
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: original Sog box
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory Coltelleria Collini
Intended use: Sports / CollectionType of production: Industrial
Production Lama: Japan
Blade: In VG10 stainless steel
Blade treatment: -
Handle: steel
Blade length: 100mm.
Blade thickness: 3mm.
Closed length: 135mm.
Total length: 235mm.
Thick when closed: 8mm
Balancing: -
Weight: 158g.
Closure: Back Lock
Clip: in stainless steel
Sheath: -
Packaging: without box
Note:SP-POL-07P -
Hogue - 4" EX-01 Drop Point G-Mascus - PRIVATE COLLECTION - knife
Knife withdrawn from private collection - 2011 model now discontinued and no longer available designed by Allen Elishewitz - Like new, with no special signs of wear and tear - Original factory sharpening in excellent condition - No original packaging - Checked and certified by our in-house laboratory.
Intended Use: TacticalProduction type: Industrial
Country of manufacture: USA
Blade: stainless steel 154CM at 58/60HRC
Blade Finish: Stonewashed
Handle: 3D machined G-10 G-Mascus
Blade length: 108mm.
Blade thickness: 3.5mm.
Length closed: 127mm.
Total length: 227mm.
Thickness when closed: 16mm
Weight: 150g
Closure: Button Lock with security system
Clip: Stonewashed Stainless Steel
Packaging: -
Notes: Design by Allen Elishewitz - knife withdrawn from private collection - like newHO-EX014-CP -
Fantoni - Hide Fixed Premium by T. Rumici - 20Pcs. Limited Edition - PRIVATE COLLECTION - knife
Knife collected from a private collection - Never used, never taken out of its box, like new - Rare model produced by Fantoni in 2009 in a limited edition of only 20 pieces based on a design by Tommaso Rumici, one of his most famous and successful knives, still very modern and with an incredibly attractive design - Supplied with box, warranty certificate, sheath and replacement Ebony grips - Checked and certified by our in-house laboratory.
Intended Use: Collection / SportingCountry of manufacture: Italy
Type of production: industrial
Blade: stainless steel CPM-S30V 61-62HRC
Blade finish: satin-finished
Handle: made of micarta or ebony wood, interchangeable as desired (cheeks included in package)
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 170mm.
Balance: set back 1cm. from the lower guard branch
Weight: 68g.
Sheath: Made of kydex, with clip
Notes: Design by T. Rumici - Limited and numbered edition of only 20 pieces - Collected from private collection, like new.Link to the HIDE project page directly on the website of Designer Tommaso Rumici
FA-HIDE-CP20 -
Andrea Pizzadili - Pattada 23cm Sardinian mouflon horn - PRIVATE COLLECTION - handcrafted knife
Handcrafted knife collected from private collection - In like new condition - never used, with factory sharpening, accompanied by craftsman's certificate and velvet fabric case - checked and certified by our in-house laboratory
Intended Use: Regional Italian / CollectionType of production: Artisan
Country of Production: City of Pattada, Sardinia, Italy
Blade: 420 stainless steel
Blade finish: satin-finished
Handle: Sardinian mouflon horn and alpaca
Blade length: 105mm.
Blade thickness: 2.5mm.
Length closed: 125mm.
Total length: 230mm.
Thickness when closed: 17mm.
Weight: 74g.
Closing mechanism: -
Clip: -
Sheath: -
Packaging: velvet fabric sheath and certificate handcrafted production signed by Andrea Pizzadili
Notes: knife withdrawn from private collection, mint condition, like newAP-PATMU-CP -
Randall Knives - Model 11 Alaskan Skinner Stag Horn - PRIVATE COLLECTION - knife
Knife withdrawn from private collection presumably dating back to the first half of the 1980s - overall in good condition - knife still has factory sharpening, but now ineffective - has a couple of small scratches on the blade and a few small marks on the guard - comes with Randall handcrafted leather sheath in excellent condition - Checked and certified by our in-house lab.
Randall's Model 11 was designed in 1952 by Tommy Thompson, noted Alaskan guide. An otima blade for skinning big game, it features a serrated top of the blade to facilitate thumb placement and prevent thumb slippage.
Intended use: hunting/collectingType of production: handcrafted
Country of manufacture: USA
Blade: O-1 carbon steel
Blade finish: satin-finished
Handle: deer antler, with brass guard
Blade length: 855mm.
Blade thickness: 4mm.
Total length: 195mm.
Balance: set back, at 2cm.
Weight: 165g.
Sheath: Leather
Notes: knife withdrawn from private collection, overall in good conditionRK-11ASH-CP -
Zero Tolerance - Hinderer 566 with 3 handles - ZT0566CF - PRIVATE COLLECTION - knife
Discontinued and no longer available model designed by Hinderer - Knife withdrawn from private collection, globally in excellent condition, with factory sharpening and original box - Originally with Carbon Fiber grip (included), accompanied by 2 additional aftermarket G10 grips and additional bronze-colored anodized titanium hardware - All original Zero Tolerance hardware is also included in the package - Checked and certified by our in-house laboratory.
Intended Use: Sporting/Tactical
Type of production: Industrial
Country of Production: USA
Blade: Elmax stainless steel
Blade Finish: Stonewashed
Handle: Stainless Steel and (originally) Carbon Fiber + 2 additional G10 grips
Blade Length: 82mm.
Blade thickness: 3mm.
Length closed: 113mm.
Total length: 196mm.
Thickness when closed: 12mm.
Weight: 145g.
Closure: Frame Lock
Clip: stainless steel, removable and multi-position (only on the carbon fiber gauntlet)
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - SpeedSafe opening system - Knife withdrawn from private collection equipped with 2 additional aftermarket G10 cheek pieces and custom titanium hardware, with bronze-colored anodizingCP-ZT566CF -
Cold Steel - Gunsite II - VG-1 Half Serrated - Made in Japan - PRIVATE COLLECTION - 29GLTH - knife
Knife from private collection - Like new, never used, with original box in excellent condition - Mid 90's production still made in Japan, with VG-1 steel - All in mint condition. Checked and certified by our in-house laboratory.
Intended Use: Collector/SportsmanType of production: Industrial
Country of Production: Japan
Blade: Stainless steel VG-1
Blade Finish: Satin
Handle: Zytel
Blade length: 104mm.
Blade thickness: 3mm.
Total length: 233mm.
Weight: 105g.
Closure: Back-Lock
Clip: Removable, painted stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: Like-new knife from a private collection, dating from the mid-1990s; made in Japan from VG-1 steelC29GLTH -
Spyderco - Viele - C42S - 1997 Made in Japan from PRIVATE COLLECTION - knife
Knife taken from private collection - Rare Spyderco model produced in December 1997 - Absolutely like new, with original box, never taken out of the box and never used - Checked and certified by our internal laboratory.
Intended Use: Collection/SportingProduction Type: Industrial
Country of Production: Japan
Blade: AUS-8 Stainless Steel
Handle: Micarta and Steel
Blade Length: 82mm.
Blade Thickness: 3mm.
Length closed: 114mm.
Total length: 196m.
Weight: 98g.
Closure: Liner Lock
Clip: Stainless steel
Package: original box with Spydero logos
Notes: knife made in 12/97, new, never used, with original box.SP-C42S-97 -
Strider Knives - AR Tiger Stripe - Flat G10 Scales S30V by Paul Bos - PRIVATE COLLECTION - knife
Knife acquired from a private collection - Overall in very good condition, with factory sharpening - Rare version, one of the first, with flat G10 handle - Hardened by Paul Bos, with logo present on the right heel of the blade - It has some small signs of abrasion on the tigerstripe finish, common to all Strider knives - Checked and certified by our internal laboratory.
Intended Use: TacticalManufacturing Type: Mid Tech (semi-craft)
Country of Production: USA
Blade: Stainless steel CPM-S30V hardened by Paul Bos
Blade Treatment: Tiger Stripe
Handle: G10 flat with 2mm titanium liners
Blade length: 103mm.
Blade thickness: 5mm.
Length closed: 137mm.
Total length: 240mm.
Thickness closed: 18mm.
Weight: 228g.
Closure: Liner Lock
Clip: Titanium
Package: Nylon pouch with zipper
Notes: Rare version, one of the first, with G10 flat grip - Hardened by Paul Bos, with logo on the right heel of the bladeST-AR-CPR -
Randall Knives - Model 11 Alaskan Skinner Fixed Blade knife - PRIVATE COLLECTION
Knife withdrawn from a private collection. Condition like new, production dating back to 2005 supplied with Randall artisan leather sheath. Checked and certified by our internal laboratory.
Randall's Model 11 features a serrated top blade for thumb placement. From a leather handle of about 11 cm equipped with a duralumin bottom. The drop-point blade was designed in 1952 by Tommy Thompson, a well-known Alaska guide. Excellent blade for skinning large game.
Intended use: hunting / collectionType of production: artisanal
Production Lama: america
Blade: stainless steel
Blade treatment: -
Handle: leather and brass discs
Blade length: 105mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 225mm.
Balance: set back, at 2cm.
Weight: 163g.
Closure: -
Clip: -
Sheath: Leather
Note:AP-M11-L -
Master of Defense - LTT 875 Tanto knife - PRIVATE COLLECTION - folding knife
Knife withdrawn from a private collection - Rare model produced by the Master of Defense around 2005 - Excellent condition. Never resharpened - Without original box - Checked and certified by our internal laboratory Coltelleria Collini.
Master of Defense, an eclectic American brand no longer in business and later taken over by Blackhawk! Blades, produced various tactical and military type folding and fixed knives, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.
The only copy at our disposal, without box, rare and out of production for many years.
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama: USA
Blade: 154CM stainless steel - DLC
Handle: polymer with aeronautical aluminum inserts with Kraton anti-slip
Blade length: 90mm.
Blade thickness: 3.5mm.
Closed length: 130mm
Total length: 223mm.
Thick when closed: 20mm
Weight: 170g.
Closure: Button Lock
Clip: removable, in stainless steel
Packaging:MOD-LTT 875-CP -
Allen Elishewitz - Gordian Knot Custom Flipper - Bronze and Carbon Fiber - PRIVATE COLLECTION - handmade knife
Knife collected from private collection - 2014 model entirely handmade by Allen Elishewitz - Like new, original sharpening - Supplied with nylon pouch with velcro - Checked and certified by our internal laboratory Coltelleria Collini.
Intended use: CollectionKind of production: Handmade
Country of production: USA
Blade: handcrafted and beveled, in CTS-C75P stainless steel (Latrobe BG-42)
Blade treatment: handmade satin finish with Allen Elishewitz golden punch
Handle: titanium liners "crushed ice" with carbon fiber and copper grips with handmade bronze bolsters
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: 128mm.
Total lenght: 223mm.
Thickness when closed: 16mm.
Weight: 199g.
Closure: Liner Lock
Clip: Removable, inegral carbon fiber
Notes: Entirely handcrafted by Allen Elishewitz - 2014 model, like new - from private collector - Supplied with nylon velcro pouch.AE-GKCF -
DPX Gear - H.E.F.T. 4 "Assault Fixed Blade - PRIVATE COLLECTION - knife
H.E.F.T. Hostile Environment Field Tool
Knife born from the collaboration between the American DPX Gear and the Italian company Lion Steel.Knife withdrawn from a private collection - Globally in excellent condition, complete with original box and certificates - Checked, certified by our in-house Coltelleria Collini laboratory.
Intended use: Sports / Tactical
Type of production: Semi-Industrial
Production Lama: Italy
Blade: Sleipner Steel 60HRC
Blade treatment: black satin TiCN PVD coating
Handle: G10 Black
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 230mm.
Balance: central
Weight: 200g.
Designed: by Tommaso Rumici & Robert Young Pelton
Sheath: cordura
Packaging: cardboard box with DPX GEAR logosAP-DPHFX002 -
Gerber - Spectre knife - 154cm - 06900 - PRIVATE COLLECTION - knife
Rare model produced by Gerber until 2003 - Knife taken from private collection - Overall in excellent condition, complete with original box and certificates - Checked, certified by our internal laboratory Coltelleria Collini.
Intended use: Tactical/Military
Blade: Stainless steel 154CM
Blade production USA
Handle: G10 with titanium folders
Blade length: 85mm.
Blade thickness: 3.5mm.
Length closed: 107mm.
Total length: 200mm.
Balance: -
Weight: 105g.
Closure: Liner Lock
Clip: Steel
Scabbard: -
Notes: -AP-06900 -
Al-Mar - Hunting knife - PRIVATE COLLECTION - knife
Rare knife produced by the Japanese Al-Mar around the 90s. Knife withdrawn from a private collection in like new condition - New knife with sheath and original box - Checked and certified by our in-house Coltelleria Collini laboratory.
Intended use: sports / collection
Type of production: industrial
Blade: AUS 8 stainless steel
Blade treatment: -
Lama production: Japan
Handle: micarta
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 195mm.
Weight: 117g.
Closing: -
Clip: -
Sheath: in leather
Notes: with original boxam-cp1 -
Rockstead - Shin knife - ZDP189 in SanMai - PRIVATE COLLECTION - knife
Retired from rivata collection - Rare Rockstead model produced in 2009 in SANMAI ZDP189 and ATS34 steel - the temper of this piece has reached a rare hardness of 67.4 hrc - Knife in like new condition.
Checked and certified by our internal laboratory - Collini Cutlery.
The best industrial knives currently in production are currently marketed under the Rockstead brand, of Ishida Co. of Sakai, Japan.
Created by Katsumi Kitano, who has been producing quality knives for over 20 years so as to have been awarded the highest recognition among artisan cutlers in Japan, they prove to be exceptional both in cutting capacity, penetration and edge retention and in terms of innovation for materials used and for the construction techniques.
Blade: SanMai ZDP189 and ATS-34 stainless steel at 67.4 HRC
Handle: Same (real stingray leather) and aircraft aluminum with black alumite treatment at Hv400
Blade length: 95 mm.
Blade thickness: 4 mm.
Total length: 210 mm.
Weight: 145 g.
Closure: Liner Lock in 402J2 steel at 52HRC
Clip: 402J2 to 52HRC steel
Notes: Accompanied by a guarantee certificate with technical specifications.RO-S-ZDP-CP -
Allen Elishewitz - Custom Titanium Frame Lock - PRIVATE COLLECTION - handmade knife
Collector's knife from private collection - Handcrafted in 2001 by Allen Elishewitz - Overall in good condition, original sharpening, some small signs of wear on the titanium handle and on the back of the blade - Without certificates and packaging - Checked and certified by our Collini Cutlery internal laboratory.
Intended use: Collection
Type of production: custom
Country of production: USA
Blade: handcrafted and bevelled, in CPM-154CM stainless steel
Blade treatment: hand satin finish
Handle: full scales in titanium with blue anodizing
Blade length: 82mm.
Blade thickness: 3.5mm.
Length closed: 130mm.
Total length: 184mm.
Thick when closed: 11mm.
Weight: 96g.
Closing: framelock
Clip: removable, stainless steel
Notes: Made entirely by hand by Allen ElishewitzAE-CU-CP -
We Knife Co. - Framelock Flipper knife Dual Tone Gray - PRIVATE COLLECTION - 605E - knife
Knife withdrawn from a private collection - Model discontinued by WE KNIFE - Like new condition, with original packaging - Checked, certified by our internal laboratory Collini Cutlery
Intended use: Sports / Collection
Type of production: Industrial
Country of production: China
Blade: CPM-S35VN 59 / 61HRC stainless steel
Blade treatment: dual tone, satin & black PVD
Handle: 6AL4V titanium machined with numerical control
Blade length: 77mm.
Blade thickness: 4mm.
Length closed: 101mm.
Total length: 178mm.
Weight: 114g.
Closing: Framelock
Clip: 6AL4V titanium
Packaging: cardboard box with We Knife Co. logos
Notes: Carson Flipper opening system on ceramic ball bearingsWK-605E-CP -
Max Salice Sanna - Daghetta in Damasteel damask and carbon fiber - PRIVATE COLLECTION - custom
Collector's knife from a private collection - Daghetta model made by the famous Italian knifemaker Max around the early 2000s - Like new condition - Checked and certified by our internal Collini Cutlery laboratory.
Intended use: Collection / Gentleman
Type of production: Artisan
Lama production: Italy
Blade: Damasteel 61/62 Hrc damascus steel
Blade treatment: -
Handle: damasteel damask bolster, carbon fiber with titanium liners
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 195mm.
Thick when closed: 13mm.
Balancing: -
Weight: 129g.
Closing: Liner Lock
Clip: in damasteel damask
Sheath: -
Notes: ONE PIECE - custom knife handcrafted by MaxMassimiliano Salice Sanna, called Max is a master knife maker "of the first hour", active for a quarter of a century. Specialized in the construction of folding knives, he is constantly looking for new materials and innovative techniques. Max is a master of the Italian guild of knife makers, born in 1958, a Roman by birth and a Tuscan by adoption.
MAX-DAG-CP -
Sergio Consoli - Custom Liner Lock folder - N ° 271 - PRIVATE COLLECTION - handmade knife
Intended use: Collection
Type of production: Artisan by Maestro CIC Sergio Consoli
Lama production: Italy
Blade: full-tang in RWL-34 60 / 61HRC stainless steel
Blade treatment: -
Handle: carbon fiber
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 205mm.
Thick when closed: 19mm.
Balancing: -
Weight: 138g.
Closing: Liner Lock
Clip: carbon fiber
Sheath: -
Packaging:
Notes: Handmade by Maestro Sergio Consoli - knife number 271 made in 2009Acknowledgments
I currently make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:
in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded the "best table on display"
always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"
moreover, I ranked second in the competition organized by LAME D'AUTORE magazine as the best fixed hunting blade
then in 2007 at "Scarperia" I won the third prize as the best closable
but above all again in 2007, I achieved, to my great satisfaction, the level of MASTER OF ITALIAN COLTELLINAI CORPORATION, recognition received at the first exam taken.
Presentation of the craftsman
Creating a hand knife is what I consider a real art form.
The satisfaction of seeing an object that comes from your own hands, that takes shape and that reaches mechanical, artistic and aesthetic perfection is what pays me more for all the hours of work and effort it takes to create a knife completely by hand.
The passion for "cutting irons" has always been in me since I was a child and has grown with me until the almost sudden decision to build my first knife on my own, it was a "need", almost an inner need that I couldn't put it off, my hands and my mind had to start creating, of course what I had always been passionate about ... the knife!
I started at 40, in 2003, practically self-taught, I had no manual work experience, but I had been a mechanical designer for many years and this allowed me to know perfectly the technique and all the various stages of mechanical processing.
Currently I am a member, with the rank of Maestro, which is the highest, of the Italian Knifemakers Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.
What I do now is what I consider my art form ..., to create "handmade, hunting and collectible knives".
They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
I make above all folding knives, which satisfy more my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they cannot be seen, is what distinguishes a hand-made knife from an industrially made one .
The mechanics must then be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.
Of course, over the years I have refined my technique and currently I have improved even more the mechanics by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction and with an incredible sweetness.
With regard to the blades, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow exceptional wire holding and cutting quality for all types of use.
Pathically I make all the knives on my initial design, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "handmade".
Regarding the materials that I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damask, both stainless steel and carbon, for the uniqueness 'that they donate to the knife, since each damask is always different from another.
For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of colors, all beautiful, I also use the fossil ivory of mammoth, various briars, titanium and carbon fiber.
Most of the knives, however, are made entirely of steel, in order to then be engraved, always and rigorously by hand, to transform the knife even more into a real work of art ...CON-271 -
Brian Tighe - Tac Tanto knife - craft knife
Intended use: collection
Type of production: custom
Blade production: U.S.A.
Blade: BG-42 stainless steel
Blade treatment: Satin finish
Handle: titanium and carbon fiber
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 195mm.
Thick when closed: 13mm
Balancing: -
Weight: 94g.
Closure: Liner Lock
Clip: in titanium
Sheath: -
Notes: production early 2000s, withdrawn from a private collectionBT-CUSTOM -
Roselli - Hunting knife - UHC steel - RW200 - handcrafted knife
The "first" Roselli, with a minimalist design equal to that which was produced in 1976. For over 45 years it has been perfect for specific use in the outdoor environment, for hunting, fishing and life in the open air.
This handmade Finnish hunting and outdoor knife was originally developed as a hunting knife for moose hunters in Finland and quickly became the perfect companion for handling larger game such as moose, wild boar and larger deer. The design and profile of the blade make it excellent for skinning game.
The blade is made of UHC (Ultra High Carbon) steel and the handle is made of heat-treated curly birch, coated with linseed oil, which ensures a firm grip even when wet. UHC steel produces an extremely sharp knife that retains its sharpness for a long time. Comes with a handcrafted sheath of dark vegetable tanned Finnish leather.
Intended use: Hunting/Sports
Type of production: artisanal
Blade: in UHC 62/63HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 105mm.
Blade thickness: 3mm.
Closed length: -
Total length: 230mm.
Balancing: -
Weight: 115g.
Closure: -
Clips: -
Sheath: Vegetable tanned leather
Note: -RO-RW200