Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
CRKT - M16-12LE knife Small Law Enforcement Tanto - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: small marks on tip
* Marks on handle: clip slightly marked
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryBlade: Teflon-coated AUS-8 high-carbon 57/58HRC stainless steel
Handle: Zytel grips
Blade length: 76 mm.
Blade thickness: 3 mm.
Total length: 185mm.
Weight: 97g.
Closure: Liner Lock
Clip: Stainless Steel
Notes: equipped with safety catchAP-CM16-12LE -
CRKT - P.S.D. II (Particle. Separation. Device.) by Hammond - AUS-10 & Brown G10 - 7910 - knife
Jim Hammond's original P.S.D. earned its name (Particle. Separation. Device.) for its ability to cut anything, anywhere. The P.S.D. II brings that same capability to a smaller, more portable folding knife, reducing the overall length by more than an inch. The blade is made of corrosion-resistant AUS10 with assisted opening on IKBS ball bearings that ensure quick and easy one-handed operation.
Intended Use: Tactical / EDC
Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-10A
Blade Treatment: Black Oxide
Handle: G10
Blade Length: 76mm.
Blade thickness: 2.8mm.
Length closed: 101mm.
Total length: 178mm.
Weight: 102g.
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Jim Hammond - Assisted opening via Carson Flipper system and IKBS ball bearing movementC7910 -
CRKT - A.B.C. (All. Bases. Covered.) by Hammond - 12C27 & Black G10 - 2606 - knife
Jim Hammond's A.B.C. (All. Bases. Covered.) makes its return in an even more versatile form. It is now a folder, bringing the varied capabilities of the original fixed blade into a more convenient and compact design. With its assisted opening and IKBS pads, it's always ready for action at any time, while the G10 handle provides a strong grip even in adverse weather conditions.
Intended Use: Tactical
Production Type: Industrial
Country of Production: China
Blade: Sandvik 12C27 stainless steel
Blade treatment: Black Oxide
Handle: G10
Blade Length: 85.9mm.
Blade thickness: 3.1mm.
Length closed: 116mm.
Total length: 203mm.
Weight: 110g.
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Jim Hammond - Assisted opening via Carson Flipper system and IKBS ball bearing movementC2606 -
CRKT - Pilar Large - Blackwashed Frame Lock Flipper by Vox - 5315KS - folding knife
Intended use: Sporting
Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Blackwashed
Handle: Blackwashed stainless steel
Blade length: 67.8mm.
Blade thickness: 3.8mm.
Length closed: 101.5mm.
Total length: 170mm.
Weight: 119g.
Closure: Frame Lock
Clip: Stainless steel, removable
Packaging: Cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5315KS -
CRKT - Overland Compact Knife by T. J. Schwarz - 6277 - knife
The compact folding knife ready to tackle any terrain.
It may be small, but just like the upgraded 4x4 vehicles that inspired its name, the Overland Compact is exaggeratedly built and ready to tackle the toughest conditions. It takes the design cues and materials of the full-size Overland and puts them into an ultraportable format that practically disappears into a pocket. When it's time to stop the convoy and set up camp, this knife can prepare light food and chop up the perfect marshmallow stick.
Intended Use: Sporty
Production type: Industrial
Country of manufacture: China
Blade: D2 steel
Blade treatment: Blackwashed
Handle: G10 and Blackwashed stainless steel
Blade Length: 57mm.
Blade thickness: 3.2mm.
Length closed: 81mm.
Total length: 137mm.
Weight: 88g.
Closure: FrameLock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by T. J. SchwarzC6277 -
CRKT - Squid Compact by Lucas Burnley - 2485K - knife
This small knife is a big deal. The Squid is known as the perfect knife for everyday use, expertly combining simplicity, usability and performance.
Neither brash nor flashy, it is the humble handyman of the knife world: reliable, solid and extraordinarily capable. Now, renowned designer Lucas Burnley has reworked it into a smaller, nimbler version, the Squid Compact. This reasonably priced folding knife is for everyone.
* Assisted opening: The assisted flipper allows rapid blade opening.
* Smooth opening: The IKBS™ ball bearing system ensures maximum smoothness.
* Easy sharpening: High-carbon stainless steel blade sharpens quickly and easily
* Maximum control: Grooves on the back of the blade to ensure a secure and comfortable grip
* Maximum durability: Stainless steel handle withstands heavy use.
* Low profile: Pocket clip ensures safe carrying
* Accessory options: Hole for lanyard or key ring
Intended Use: EDC
Production type: Industrial
Country of manufacture: China
Blade: Stainless steel 8Cr13MoV
Blade Finish: BlackWashed
Handle: BlackWashed stainless steel
Blade Length: 44mm.
Blade thickness: 2.6mm.
Length closed: 74mm.
Total length: 118mm.
Weight: 79g.
Closure: Frame Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Lucas Burnley - IKBS opening system on pinball-type bearings, spring preload assistedC2485K -
CRKT - Tuna Compact by Lucas Burnley - 2522 - knife
The little fish that rules every pond. Though small, the Tuna Compact evokes the power of one of the world's largest and fastest fish.
It takes the subtle elegance of designer Lucas Burnley's original Tuna and shrinks it into an ultra-compact folding knife. With a profile that suggests strong forward momentum and a blade shape that resembles a deep-sea carnivore, this everyday knife slices through packs and boxes faster than a bluefin tuna slices through waves on a taut line.
* Smooth opening: IKBS™ ball-bearing motion allows for a smooth blade opening.
* Easy sharpening: High-carbon stainless steel blade sharpens quickly and easily.
* Easy opening: The thumb engagement pin allows for quick one-handed opening.
* Exceptional grip: G10 handle provides exceptional grip in all conditions
* Brute force: Fame Lock system uses a thick locking bar to hold the blade in place
* Low profile: Pocket clip ensures safe and secure carrying away from prying eyes
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13MoV
Blade Finish: StoneWashed
Handle: G10 and BlackWashed stainless steel
Blade Length: 69mm.
Blade thickness: 3.6mm.
Length closed: 97mm.
Total length: 163mm.
Weight: 79g.
Closure: Frame Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Lucas Burnley - IKBS ball bearing opening systemC2522 -
CRKT - CEO MicroFlipper Sheepfoot by Rogers - 7083 - knife
The smaller version of the popular CEO folding knife, the Microflipper combines refined style with maximum practicality. It may be small, but it's a serious contender for any job thanks to its lightweight aluminum handle and razor-sharp blade made of Sandvik 12C27™ steel.
This stylish pocket knife is available in two versions: drop-point blade with silver aluminum handle and blue coating, or sheepfoot blade with blue aluminum handle and silver coating.
* Superior performance: Sandvik 12C27™ steel for excellent edge retention.
* Smooth opening: IKBS™ ball-bearing motion allows smooth blade opening.
* Fast opening: Flipper opening system deploys the blade quickly.
* Sturdy and lightweight: Aluminum handle combines strength and minimal weight
* Easy closing: The blade can be easily closed with one hand.
* Carrying options: Adjustable ambidextrous clip for carrying in left or right pocket
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: Sandivk 12C27 stainless steel
Blade Finish: Satin finish
Handle: Aluminum
Blade length: 56mm.
Blade thickness: 2.2mm.
Length closed: 82mm.
Total length: 140mm.
Weight: 48g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - Carson Flipper opening system on IKBS ball bearingsC7083 -
CRKT - CEO MicroFlipper Drop Point by Rogers - 7081 - knife
The smaller version of the popular CEO folding knife, the Microflipper combines refined style with maximum practicality. It may be small, but it's a serious contender for any job thanks to its lightweight aluminum handle and razor-sharp blade made of Sandvik 12C27™ steel.
This stylish pocket knife is available in two versions: drop-point blade with silver aluminum handle and blue coating, or sheepfoot blade with blue aluminum handle and silver coating.
* Superior performance: Sandvik 12C27™ steel for excellent edge retention.
* Smooth opening: IKBS™ ball-bearing motion allows smooth blade opening.
* Fast opening: Flipper opening system deploys the blade quickly.
* Sturdy and lightweight: Aluminum handle combines strength and minimal weight
* Easy closing: The blade can be easily closed with one hand.
* Carrying options: Adjustable ambidextrous clip for carrying in left or right pocket
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: Sandivk 12C27 stainless steel
Blade Finish: Satin finish
Handle: Aluminum
Blade length: 60mm.
Blade thickness: 2.2mm.
Length closed: 82mm.
Total length: 143mm.
Weight: 48g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - Carson Flipper opening system on IKBS ball bearingsC7081 -
Antonini knives - Old Bear knife in SanMai VG10 a 67 layers - 23cm - multilayer black - Limited Edition
Antonini artisans from Maniago have created an exclusive and limited series of OLD BEAR knives using the famous Japanese SANMAI steel in VG10 with 67 layers. This beautiful project combines the tradition of a successful knife, patented and built in Italy, with the history and qualitative excellence of Japanese steel, made with a production process that dates back to that used for the famous Japanese swords.
The thickness of the blade goes from 2 mm of the standard models to 2.5 mm of this exclusive series, in order to make the knife more robust and performing.
To make the knife even more exclusive, for each of the three sizes offered, 60 exclusive pieces have been created, with progressive numbering engraved on the blade
Type of production: semi-artisanal
Production Lama: Italy
Blade: San Mai 67 VG10 damask stainless steel (60/61 HRC)
Handle: in plywood with satin brass ring with nickel plating
Blade length: 100mm.
Blade thickness: 2.5mm.
Closed length: 127mm.
Thick when closed: 22mm.
Total length: 225mm.
Weight: 68g.
Closure: viro blockThe handles are made of Italian olive wood. Being a model without return spring, the fixing of the blade to the handle is ensured by a solid safety ring in nickel plated brass equipped with a special locking device (covered by patent n. active partner of this project) which can be activated both in the open and in the closed position.
As early as 1100, expert Japanese blacksmiths combined different materials together to give Katana swords cutting, strength and flexibility previously unknown. Inspired by this tradition, Berkel has created a series of Japanese SanMai steel knives.
The blade consists of a core layer of extremely hard VG-10 steel, which keeps it sharp for a long time, and two outer plates made of 33-layer damask stainless steel per side, for greater resistance to corrosion and torsion.
Characteristics of SanMai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: Collini Steel
AE-9305/23_MNK -
Antonini knives - Old Bear knife in SanMai VG10 at 67 layers - 21cm - olive tree - Limited Edition
Antonini artisans from Maniago have created an exclusive and limited series of OLD BEAR knives using the famous Japanese SANMAI steel in VG10 with 67 layers. This beautiful project combines the tradition of a successful knife, patented and built in Italy, with the history and qualitative excellence of Japanese steel, made with a production process that dates back to that used for the famous Japanese swords.
The thickness of the blade goes from 2 mm of the standard models to 2.5 mm of this exclusive series, in order to make the knife more robust and performing.
To make the knife even more exclusive, for each of the three sizes offered, 60 exclusive pieces have been created, with progressive numbering engraved on the blade
Type of production: semi artisanal
Production Lama: Italy
Blade: San Mai 67 VG10 damask stainless steel (60/61 HRC)
Handle: olive wood
Blade length: 90mm.
Blade thickness: 2.5mm.
Closed length: 120mm.
Thick when closed: 22mm.
Total length: 212mm.
Weight: 65g.
Closure: viro blockThe handles are made of Italian olive wood. Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent n. of this project) which can be activated both in the open position and in the closed position.
As early as 1100, expert Japanese blacksmiths combined different materials together to give Katana swords cutting, strength and flexibility previously unknown. Inspired by this tradition, Berkel has created a series of Japanese SanMai steel knives.
The blade consists of a core layer of extremely hard VG-10 steel, which keeps it sharp for a long time, and two outer plates made of 33-layer damask stainless steel per side, for greater resistance to corrosion and torsion.
Characteristics of SanMai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or with a damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: Collini Steel
AE-9305/21_LU -
Antonini knives - Old Bear knife in SanMai VG10 at 67 layers - 19cm - walnut - Limited Edition
Antonini artisans from Maniago have created an exclusive and limited series of OLD BEAR knives using the famous Japanese SANMAI steel in VG10 with 67 layers. This beautiful project combines the tradition of a successful knife, patented and built in Italy, with the history and qualitative excellence of Japanese steel, made with a production process that dates back to that used for the famous Japanese swords.
The thickness of the blade goes from 2 mm of the standard models to 2.5 mm of this exclusive series, in order to make the knife more robust and performing.
To make the knife even more exclusive, for each of the three sizes offered, 60 exclusive pieces have been created, with progressive numbering engraved on the blade
Type of production: semi artisanal
Production Lama: Italy
Blade: San Mai 67 VG10 damask stainless steel (60/61 HRC)
Handle: in walnut wood
Blade length: 80mm.
Blade thickness: 2.5mm.
Closed length: 109mm.
Thick when closed: 22mm.
Total length: 190mm.
Weight: 46g.
Closure: viro blockThe handles are made of antique and oiled walnut wood. Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent n.1187282 filed again in 1985 by the Todesco company of Maniago which is an active partner of this project) which can be activated both in the open position and in the closed position.
As early as 1100, expert Japanese blacksmiths combined different materials together to give Katana swords cutting, strength and flexibility previously unknown. Inspired by this tradition, Berkel has created a series of Japanese SanMai steel knives.
The blade consists of a core layer of extremely hard VG-10 steel, which keeps it sharp for a long time, and two outer plates made of 33-layer damask stainless steel per side, for greater resistance to corrosion and torsion.
Characteristics of SanMai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or with a damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: Collini Steel
AE-9305/19_LN -
CRKT - Clever Girl Kukri Knife - 2710 - Machete
Intended Use: Hiking / Heavy Duty
Production Type: industrial
Blade: Full Tang in carbon steel SK-5 with Black Powder treatment
Country of Production: Taiwan
Handle: G-10
Blade Length: 196mm.
Blade thickness: 4.8mm.
Total length: 336mm.
Balance: Advanced
Weight: 402g.
Sheath: thermoplastic
Packaging: cardboard box with CRKT logos
Notes: Design by Austin McGlaunCR2710 -
CRKT - Folts Minimalist Drop Point Black - 2384K - Knife
Intended Use: Neck Knife
Production type: Industrial
Country of Production: China
Blade: Stainless steel 5Cr15MoV 55/57HRC
Blade Finish: Blacwashed
Handle: G-10
Blade Length: 55mm.
Blade thickness: 2.6mm.
Total length: 133mm.
Weight: 49g.
Scabbard: Polypropylene
Package: Cardboard box with CRKT logos.
Notes: Design dy Alan FoltsCR2384K -
Antonini knives - Old Bear - Roncola 17cm Walnut - 9747 / 17LN - knife
Old Bear ™ is the new and exclusive line of pocket knives produced by Antonini from Maniago. This series is characterized by simple and ergonomic shapes, celebrates the 90th anniversary of the company foundation (1925-2015) and is made using traditional production techniques with a high level of manual skills.
Type of production: semi artisanal
Country of production: Italy
Blade: 420 stainless steel 54/56 HRC
Handle: in American walnut wood
Blade length: 70mm.
Blade thickness: 2mm.
Closed length: 115mm.
Thick when closed: 22mm.
Total length: 175mm.
Weight: 55g.
Closure: in brass, with lock both in opening and closingThe handles are made of oiled American walnut wood while the blade made of stainless steel, sharpened and hand-picked on the stone by skilled craftsmen.
Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent n.1187282 filed again in 1985 by the Todesco company of Maniago which is an active partner of this project) which can be activated both in the open position and in the closed position.
This product was built by subjecting the necessary raw materials to artisanal treatments such as to make every single knife unique, original and non-standardized. Any surface irregularities represent the confirmation of our manual processing and do not absolutely affect the operational functionality of the tool.
9747/17LN -
CRKT - Carson M16-13DSFG Tan Special Forces - PRIVATE COLLECTION - pocket knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A couple of small marks on Tan-colored finish, unnoticeable
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting/TacticalProduction Type: Industrial
Country of Production: China
Blade: Stainless steel AUS-8
Blade Finish: Tan Oxide
Handle: PVD steel folders with G10 Tan grips
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 140mm.
Total length: 240mm.
Weight: 150g.
Opening: Carson Flipper system
Closure: Liner Lock with auto LAWKS security system
Clip: multi-position, removable, Black Oxide stainless steel
Packaging: cardboard box with CRKT logos
Notes: Design by Kit Carson - Carson Flipper opening systemM16-13DSFG-CP -
CRKT - Techliner Super Shorty - TPENBOND2 - tactical pen
The Techliner™ Super Shorty pen is built to impress with a sleek, ergonomic body and magnetic ends that attach securely to whiteboards, desk legs and workbenches so it's always within reach.
Secure cap: Magnetic ends secure the cap and attach to surfaces
Strong and lightweight: Aluminum handle combines strength with minimal weight
Visually appealing: Blue anodized body
Compact size: Easy to carry
Write anywhere: Ink cartridge developed for extreme environmental conditionsMaterial: 6061 anodized aluminum with stainless steel clip
Rear base: Magnetic
Ink: Black with pressurized Schmidt Refill
Total length: 105mm.
Diameter: 11.7mm.
Weight: 19.8gTPENBOND2 -
CRKT - Freya by Elmer Roush - 2749 - Viking Axe
Intended Use: Sporting / Hiking
Production type: Industrial
Country of Production: Taiwan
Blade: Carbon steel 1055
Blade treatment: manganese phosphate
Handle: Walnut wood
Blade length: 88mm.
Blade thickness: 32mm.
Total length: 483mm.
Weight: 870g.
Scabbard: -
Notes: Design by Elmer RoushCR2749 -
CRKT - Berserker by RMJ Tactical - 2736 - Viking Axe
Intended Use: Sporting / Hiking
Production type: Industrial
Country of Production: Taiwan
Blade: Carbon steel 1055
Blade treatment: manganese phosphate
Handle: Walnut wood
Blade length: 118mm.
Blade thickness: 40mm.
Total length: 483mm.
Weight: 940g.
Scabbard: -
Notes: Design by by Ryan Johnson of RMJ TacticalCR2736 -
CRKT - Compano Carabiner by Bond - 9082 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: Stainless steel 5Cr15Mov
Blade finishing: Satin finish
Handle: 2Cr13 stainless steel with blackwash and bronze finish
Blade length: 37mm.
Blade thickness: 3.6mm.
Length closed: 82mm.
Total length: 117mm.
Weight: 62g.
Closure: Slipjoint
Clip: -
Package: Cardboard box with CRKT logos
Notes: Design by Mike Bond - Snap hook for attachment - Bottle openerCR9082 -
CRKT - Folts Minimalist Cleaver Blackout - 2383K - Knife
Intended Use: Neck Knife
Production type: Industrial
Country of Production: China
Blade: Stainless steel 5Cr15MoV 55/57HRC
Blade Finish: Blacwashed
Handle: G-10
Blade Length: 54mm.
Blade thickness: 2.6mm.
Total length: 129mm.
Weight: 48g.
Scabbard: Polypropylene
Package: Cardboard box with CRKT logos.
Notes: Design dy Alan FoltsCR2383K -
CRKT - Pilar III by Vox - 5317 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin finish
Handle: G10 and stainless steel with aluminum spacer
Blade length: 75mm.
Blade thickness: 3.8mm.
Length closed: 108mm.
Total length: 182mm.
Weight: 102g.
Closure: FrameLock
Clip: Stainless steel, removable
Packaging: Cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5317 -
CRKT - Carson M16-03BK - Bronze & Black Oxide - knife
Intended Use: Sporting / Tactical
Production Type: Industrial
Country of Production: China
Blade: Stainless steel 12C27 Sandvik
Blade treatment: Black Oxide
Handle: Stainless steel 2CR13 with nitriding in Bronze
Blade Length: 90mm.
Blade thickness: 3mm.
Length closed: 118mm.
Total length: 209mm.
Weight: 108g.
Opening: Carson Flipper system
Closure: Frame Lock
Clip: Multi-position, removable, in Black Oxide stainless steel
Package: Cardboard box with CRKT logos
Notes: Design by Kit Carson - Carson Flipper opening systemCM16-03BK -
CRKT - CEO Bamboo by Rogers - 7096YGK - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Blackwashed
Handle: Nylon reinforced with fiberglass
Blade length: 79mm.
Blade thickness: 2.2mm.
Length closed: 113mm.
Total length: 194mm.
Weight: 59g.
Closing: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - IKBS ball bearing opening system - Winner of the 2019 Blade Show as "Best Buy Of The Year"C7096YGK -
Antonini Knives - Old Bear mushroom knife Walnut - 9387 / 19_LN - knife
Old Bear ™ model specifically produced for mushroom picking thanks to the curved blade and the brush inserted in the handle
Type of production: semi artisanal
Production Lama: Italy
Blade: Tempered Aisi 420 stainless steel - HRC 54/56
Handle: walnut wood handle
Blade length: 65mm.
Blade thickness: 2mm.
Closed length: 130mm.
Thick when closed: 200mm.
Weight: 49g.
Closure: viro block
Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent n.1187282 filed again in 1985 by the Todesco company of Maniago which is an active partner of this project) which can be activated both in the open position and in the closed position.AE-9387/19LN -
Antonini Knives - Old Bear Mushrooms knife Olive - 9387/19 - knife
Old Bear ™ model specifically produced for mushroom picking thanks to the curved blade and the brush inserted in the handle
Type of production: semi-artisan
Lama production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Handle: olive wood handle
Blade length: 65mm.
Blade thickness: 2mm.
Length closed: 130mm.
Thick when closed: 200mm.
Weight: 49g.
Closing: viro block
Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent no.1187282, still filed in 1985 by Todesco di Maniago, an active partner. of this project) which can be activated both in the open and closed positions.AE-9387/19LU -
CRKT - Tuna Knife by Burnley - 2520 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr14Mov 58/60 HRC stainless steel
Blade treatment: Blackwashed
Handle: G10 and Blackwashed stainless steel
Blade length: 82mm.
Blade thickness: 3.7mm.
Length closed: 114mm.
Total length: 195mm.
Weight: 105g.
Closing: FrameLock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Lucas BurnleyC2520 -
CRKT - Piet by Vox - 5390 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Satin finish
Handle: Nylon reinforced with fiberglass with anodized titanium spacer
Blade length: 68mm.
Blade thickness: 3.3mm.
Length closed: 95mm.
Total length: 164mm.
Weight: 71g.
Closing: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5390 -
Antonini knives - Old Bear knife Grafting 9377 19 cm walnut - knife
Old Bear ™ is the new and exclusive line of pocket knives produced by the Antonini firm from Maniago. This series is characterized by simple and ergonomic shapes, celebrates the 90th anniversary of the company foundation (1925-2015) and is realized by engaging traditional production techniques with a high degree of manual skill.
9377/19 Grafting - Grafting
Type of production: artisan seeds
Lama production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Handle: in walnut wood
Blade length: 75mm.
Blade thickness: 2mm.
Closed length: 109mm.
Thick when closed: 22mm.
Total length: 185mm.
Weight: 42g.
Closure: viro block
The handles are made of antique walnut and oiled wood, while the blade made of stainless steel is sharpened and picked up by hand on the stone by skilled artisan hands.
Being a model without a return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring with a special locking device (covered by patent n.1187282 deposited again in 1985 by the Todesco company of Maniago which is an active partner of this project) that can be activated both in the open position and in the closed position.
Send feedback
History
Saved
CommunityAE-9377/19LN -
Antonini knives - Old Bear knife Electrician 9327 19 cm walnut - knife
Old Bear ™ is the new and exclusive line of pocket knives produced by the Antonini firm from Maniago. This series is characterized by simple and ergonomic shapes, celebrates the 90th anniversary of the company foundation (1925-2015) and is realized by engaging traditional production techniques with a high degree of manual skill.
9327/19 Electrician
Type of production: artisan seeds
Lama production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Handle: in walnut wood
Blade length: 80mm.
Blade thickness: 2mm.
Closed length: 109mm.
Thick when closed: 22mm.
Total length: 190mm.
Weight: 44g.
Closure: viro block
The handles are made of antique walnut and oiled wood, while the blade made of stainless steel is sharpened and picked up by hand on the stone by skilled artisan hands.
Being a model without a return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring with a special locking device (covered by patent n.1187282 deposited again in 1985 by the Todesco company of Maniago which is an active partner of this project) that can be activated both in the open position and in the closed position.AE-9327/19LN -
CRKT - Pilar Large by Vox - 5315G - folding knife
Destination of use: Sports
Type of production: Industrial
Country of production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin
Handle: Stainless Steel
Blade length: 67mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 170mm.
Weight: 98g.
Closure: Frame Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5315G -
Antonini Knives - Old Bear knife Olive - X-Large 23cm - knife
Type of production: artisanal seed
Blade production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Manicure: Olive wood
Blade Length: 100mm.
Blade thickness: 2mm.
Closed length: 127mm.
Closed thickness: 22mm.
Total length: 225mm.
Weight: 67g.
Closure: viro block
"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: M (19 cm - 7½ ") and L (cm.21 - 8¼") as above analitically presented.The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.
BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with lockingIMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.
AE-9307/23LU -
Antonini Knives - Old Bear knife Ulivo - Large 21cm - knife
Type of production: artisanal seed
Blade production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Manicure: olive wood handle
Blade Length: 90mm.
Blade thickness: 2mm.
Closed length: 120mm.
Closed thickness: 22mm.
Overall length: 212mm.
Weight: 62g.
Closure: viro block"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.
The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: S, M, L, XL.The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.
BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with lockingIMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.
AE-9307/21LU -
Antonini Knives - Old Bear knife Multistrato Black Medium 19cm - knife
Type of production: artisanal seed
Blade production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Manicure: Multilayer Wood & Italian Flag
Blade Length: 80mm.
Blade thickness: 2mm.
Closed length: 109mm.
Closed thickness: 22mm.
Total length: 190mm.
Weight: 37g.
Closure: viro block"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.
The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: S, M, L, XL.The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.
BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with lockingIMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.
AE-9307/19LU -
Antonini Knives - Old Bear knife Ulivo Small 17cm - knife
Type of production: artisanal seed
Blade production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Manicure: olive wood handle
Blade Length: 70mm.
Blade thickness: 2mm.
Closed length: 97mm.
Closed thickness: 22mm.
Total Length: 170mm.
Weight: 32g.
Closure: viro block
"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: M (19 cm - 7½ ") and L (cm.21 - 8¼") as above analitically presented.The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.
BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with lockingIMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.
AE-9307/17LU -
Antonini Knives - Old Bear knife Multistrato Black Small 17cm - knife
Type of production: artisanal seed
Blade production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Handle: multilayer handle & Italian flag
Blade Length: 70mm.
Blade thickness: 2mm.
Closed length: 97mm.
Closed thickness: 22mm.
Total Length: 170mm.
Weight: 32g.
Closure: viro block
"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: M (19 cm - 7½ ") and L (cm.21 - 8¼") as above analitically presented.The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.
BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with lockingIMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.
AE-9307/17MT -
CRKT - Hi Jinx Z by Ken Onion - K281KXP - PRIVATE COLLECTION - Pocket Knife
KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: like new
* Commercially available: discontinued
* Sharpening: factory sharpened
* Marks on the blade: None
* Marks on the handle: None
* Box: Present
* Scabbard: /
* Manuals, certificates and warranties: Available
* Tested and certified by our in-house laboratory.Intended Use: Sporting
Production Type: Industrial
Country of manufacture: China
Blade: Stainless steel 1.4116
Blade finish: Satin surface
Handle: GFN nylon
Blade length: 84 mm.
Blade thickness: 2.3 mm.
Length closed: 120 mm.
Total length: 203 mm.
Weight: 139 g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Packaging: Cardboard box with CRKT logo
Notes: Ball bearing opening with IKBS system - Opening via Carson pinball system - Design by Ken OnionCK281KXP -
CRKT - Pilar by Vox - 5311 - folding knife
Intended use: Sports / EDC
Type of production: Industrial
Production Country: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin finish
Handle: Stainless Steel
Blade length: 61mm.
Blade thickness: 3.5mm.
Closed Length: 90mm.
Overall length: 151mm.
Weight: 119g.
Lock: Frame Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5311 -
Antonini - Old Bear Gift Box for 19/21/23cm Knives - Accessories
Gift Box by Antonini designed for the classic Old Bear models with 19cm, 21cm and 23cm blades.
Select in the drop-down menu on the side the right size of the knife to be contained inside.Made in Italy entirely of wood and cardboard, it gives a touch of class to your knife.
Compatibility:AE-9307/19LN
AE-9307/21LN
AE-9307/23LNAE-9307/19LU
AE-9307/21LU
AE-9307/23LUAE-9307/19MT
AE-9307/21MT
AE-9307/23MTAE-9303/19MNN
AE-9303/21MNN
AE-9303/23MNNAE-9303/19MNK
AE-9303/21MNK
AE-9303/23MNKAE-9305/19LN
AE-9305/21LU
AE-9305/23MNKAE-GIFTBOX -
Antonini - Old Bear 9307S 17cm knife - knife
9307/17
Type of production: Hand seeds
Production Lama: Italy
Blade: Stainless steel AISI 420 tempered - HRC 54/56
Handle: walnut
Blade length: 70mm.
Blade Thickness: 2mm.
Closed Length: 97mm.
Thick when closed: 22mm.
Overall length: 170mm.
Weight: 34g.
Closing: viro block
"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: M (19 cm - 7½ ") and L (cm.21 - 8¼") as above analitically presented.The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.
BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with lockingIMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.
AE-9307/17LN -
Antonini - Old Bear 9307M 19cm knife - knife
9307/19 M
Type of production: mostly by hand
Production Country: Italy
Blade: Stainless steel AISI 420 tempered - HRC 54/56
Handle: walnut
Blade length: 80mm.
Blade Thickness: 2mm.
Closed Length: 109mm.
Thick when closed: 22mm.
Overall length: 190mm.
Weight: 36g.
Closing: rotating block
"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: S, M, L, XL.The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.
BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with lockingIMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.
AE-9307/19LN -
Antonini knives - Old Bear knife 9307L 21cm - knife
Old Bear ™ is the new and exclusive line of pocket knives produced by the maniago company Antonini. This series is characterized by simple and ergonomic shapes, celebrating the 90th anniversary of the company foundation (1925-2015) and is realized by engaging traditional production techniques with a high level of manual skills.
9307 / 21L
Type of production: semi-handmade
Lama production: Italy
Blade: Tempered Aisi 420 stainless steel - HRC 54/56
Handle: in walnut wood
Blade length: 90mm.
Blade thickness: 2mm.
Length closed: 120mm.
Thick when closed: 22mm.
Total length: 212mm.
Weight: 60g.
Closure: viro block
The sleeves are made of antique walnut and oiled, while the blade made of stainless steel, is sharpened and manually reworked on the stone by skilled craftsmen hands.
Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring with a special locking device (covered by patent n.1187282 filed again in 1985 by the company Todesco di Maniago which is active partner of this project) can be activated both in open position and in closed position.AE-9307/21LN -
Antonini - Old Bear 9307XL 23cm knife - knife
Type of production: Hand seeds
Production Lama: Italy
Blade: Stainless steel AISI 420 tempered - HRC 54/56
Handle: walnut
Blade length: 100mm.
Blade Thickness: 2mm.
Closed Length: 127mm.
Thick when closed: 22mm.
Overall length: 225mm.
Weight: 66g.
Closing: viro block
"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: M (19 cm - 7½ ") and L (cm.21 - 8¼") as above analitically presented.The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.
BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with lockingIMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.
AE-9307/23LN -
Lame d'autore - N° 70 - 04/2016 - magazine
Rivista a colori, Trimestrale, prodotta e distribuita in Italia dal 1998.
Specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi e multiuso)In questo numero troverete:
PROFILI: Celso Fiocchi, Pasquale De Bartolomeo
TECNICA: Cucire il fodero
REPORTAGE: Il Cic attraverso le foto di Francesco Pachì, Shot show
TEST: Blackfox Bf-705b Sai, Fällkniven Pc, Prezioso Ferus desert, Spyderco Dogtag folder C188
PROFILO AZIENDA: Kunzi compie 80 anni
STORIA: Pugnali-coltelli da assaltatore, 1915-16; La rinascita della LeppaLame70 -
Lame d'autore - N° 68 - November 2015 - magazine
Rivista a colori, Trimestrale, prodotta e distribuita in Italia dal 1998.
Specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi e multiuso)In questo numero troverete:
TECNICA: Costruiamo il fodero; Il restauro dei rasoi
REPORTAGE: Achi show, Coltello in festa; Feria de Albacete; Ficx 2015
STORIA: Pugnale da assaltatore 1960; Victorinox in orbita
TEST: Azero 211012; Fkmd Wilson combat Fx.307Cb Rapid response; Outdoor edge Brush demon; North arm knives Osprey; Spyderco Lil' LionSpy C181Gti; Wallet Ninja.lame68 -
Lame d'autore - N° 67 - July 2015 - magazine
Rivista a colori, Trimestrale, prodotta e distribuita in Italia dal 1998.
Specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi e multiuso)In questo numero troverete:
- Speciale visita a Pattada
- Reportage IWA
- Storia: Pugnale 1936 Opera balilla
- Test:
* Azero 151233
* Black Fox Trackmaster
* Camillus Les Stroud
* Spyderco Brad Southard
lame67 -
CRKT - Ken Onion Hootenanny - K300KXP - knife
Intended use: Sports
Type of production: Industrial
Production Lama: China
Blade: Stainless steel 8Cr13MoV
Treatment Lama: Satin
Handle: Stainless steel 2Cr13 and grips FRN
Blade length: 85mm.
Blade thickness: 3.5mm.
Length closed: 116mm.
Overall length: 201mm.
Thick when closed: -
Balancing: -
Weight: 136g.
Closure: Frame Lock Stainless Steel 2Cr13
Clip: removable, stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT, Design Ken Onion, opening system with ball bearing type IKBS opening type Carson FlipperCK300KXP -
CRKT - Burnley Squid - 2490 - knife
Intended use: Sports
Type of production: Industrial
Production Lama: China
Blade: Stainless steel 8Cr13MoV
Treatment Blade: Stonewashed
Handle: Stainless Steel 2Cr13
Blade length: 54mm.
Blade thickness: 3mm.
Closed Length: 55mm.
Overall length: 114mm.
Thick when closed: 14mm.
Balancing: -
Weight: 96g.
Closure: Frame Lock Stainless Steel 2Cr13
Clip: removable, stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT, Design Lucas BurnleyC2490 -
CRKT - Carson M16-12ZLEK Law Enforcement Zytel Folding Tanto - knife
Blade: Stainless steel AUS-8 high-carbon 57 / 58HRC Teflon
Handle: Zytel Grips
Blade length: 76 mm.
Blade thickness: 3 mm.
Overall length: 185 mm.
Weight: 102 g.
Lock: Liner Lock
Clip: Stainless Steel
Notes: equipped with safety locks and AutoLAWKS guard Carson Flipper tagliacinture with integrated rear window breakerCM16-12ZLEK -
Lame d'autore - N° 65 - January 2015 - magazine
Rivista a colori, Trimestrale, prodotta e distribuita in Italia dal 1998.
Specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi e multiuso)Un grande fascicolo questo n°65 del trimestrale Lame d'autore. Ci sono reportage dal salone della Corporazione italiana coltellinai di Milano e quello di Culter expo, a Novegro (Mi).
Poi un excursus sui coltelli survival di Maurizio Ceracchi e il profilo del coltellinaio piemontese Luciano Ferraudo.
Per la storia, siamo andati a studiare il pugnale per assaltatori del Rei modello 1939 e il Victorinox Soldier.
La sezione della tecnica si occupa della temprabilità e struttura degli acciai.
Imperdibile il glossario dedicato alla lettera C con oltre 50 voci.
Questi i test: Atk Aquitania, Browning Non-typical stag, Crkt Drifter large, Extrema Ratio Resolza, Mitchell Tarlo, Muela 21733-G, Spyderco Domino pin
lame65 -
Lame d'autore - N° 62 - April 2014 - magazine
Color Magazine , Quarterly , produced and distributed in Italy since 1998.
Specializing in knives of all types ( collection , craft , military, sports and multi-purpose)
80 Pages
A number this explosive 62 which inaugurates the 15th year of the magazine Lame author , the first and most important part of the landscape .
Victorinox , however, it turns 130 years old : we went to visit the factory where they produce 120 thousand knives a day. Reporting from the guild hall Italian knife , custom knives with the most interesting of the moment and pictures of Francesco Pachì and shot by American show in Las Vegas. The profile is dedicated to Michael " Cormoran " Sferragatta .
The magazine continues with the technique of sharpening of the razor with the use of very traditional strop ...
These tests : 110 Buck Hunter anniversary , Condor Kukri machete , P3G Fallkniven , Fox knives - Golok Hitam , Great eastern cutlery lockable Maserin GTO , Viper Carnera , Woodlore 25th anniversary .
Of course, much more to be the best survival knife and knives created by readers of the Facebook group .lame63 -
Lame d'autore - N° 62 - April 2014 - magazine
Color Magazine , Quarterly , produced and distributed in Italy since 1998.
Specializing in knives of all types ( collection , craft , military, sports and multi-purpose)
80 Pages
A number this explosive 62 which inaugurates the 15th year of the magazine Lame author , the first and most important part of the landscape .
Victorinox , however, it turns 130 years old : we went to visit the factory where they produce 120 thousand knives a day. Reporting from the guild hall Italian knife , custom knives with the most interesting of the moment and pictures of Francesco Pachì and shot by American show in Las Vegas. The profile is dedicated to Michael " Cormoran " Sferragatta .
The magazine continues with the technique of sharpening of the razor with the use of very traditional strop ...
These tests : 110 Buck Hunter anniversary , Condor Kukri machete , P3G Fallkniven , Fox knives - Golok Hitam , Great eastern cutlery lockable Maserin GTO , Viper Carnera , Woodlore 25th anniversary .
Of course, much more to be the best survival knife and knives created by readers of the Facebook group .LAME62 -
CRKT - Chanceinhell by Ken Onion - K910KKP - Machete
Destinazione d'uso: Escursionismo/Heavy Duty
Tipo di Produzione: industriale
Lama: in acciaio al carbonio 65Mn a 54/56 HRC con trattamento Black Powder
Produzione Lama Cina
Manicatura: Polimeri TPR e Nylon
Lunghezza lama: 304mm.
Spessore della lama: 2.5mm.
Lunghezza totale: 450mm.
Bilanciatura: avanzata
Peso: 490g.
Chiusura: -
Clip: -
Fodero: in Nylon
Confezione: scatola di cartone con loghi CRKT
Note: Design by Ken OnionCK910KKP -
Lame d'autore - Numero 61 - Dicembre - Anno 2013 - rivista
Rivista a colori, Trimestrale, prodotta e distribuita in Italia dal 1998.
Specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi e multiuso)
80 Pagine
Storia: Coltelli ed ex voto
Tecnica: Teoria dei trattamenti termici degli acciai
Reportage: Culter Expo 2013
Legge: Perché la cassazione ci è ostile?
Profilo: Marcello Garau
Test coltelli: Brusletto Villmann, Condor Koukri, Extrema Ratio Dicok, Fkmd Exagon range, Morris Knives Friction folder, Stuart Mitchell knives Secare, Spyderco Brad Southard Pin, Viper Mathusalemlame61 -
Lame d'autore - Numero 60 - Ottobre - Anno 2013 - rivista
Rivista a colori, Trimestrale, prodotta e distribuita in Italia dal 1998.
Specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi e multiuso)
80 Pagine
STORIA
Coltellate risorgimentali nello Stato Pontificio
TECNICA
I rasoi con lame sinterizzate
REPORTAGE
Maniago campione d'Europa
PROFILO
Giuseppe Galante
TEST
Brustello Trillemarka
Camillus Les Stroud Sk Arctic
Crkt Ken Onion Foresight
Fantoni Contrast utility tactical
Fox Zero
Gerber Bear Grylls Ultimate pro fixed blade
Lion Steel TiSpine
Victorinox Hunter pro
Viper Rhinolame60 -
CRKT - M16-04Z by Kit Carson - knife
Intended use: Sport
Type of production: Industrial
Production Blade: Taiwan
Blade: AUS-8 stainless steel
Treatment Lama: -
Handle: Zytel
Blade length: 94mm.
Blade thickness: 3.5mm.
Closed Length: 134mm.
Total length: 230mm.
Thick when closed: 17mm.
Balance: -
Weight: 182g.
Lock: Liner Lock locking system with self-LAWKS
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos CRKT
Notes: -CM16-04Z -
Lame d'autore - Numero 59 - Maggio - Anno 2013 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 80 Pagine STORIA Gli accoltellatori "tirannicidi" TECNICA Il maglio di Scordia Forgiatura e tempra di Yoshindo Yoshihara L'affilatura “serrated” REPORTAGE Shot Show Iwa Exa TEST Condor Nessmuk Crkt Eraser 8900K Cudeman 123M Cesar Bozal Extrema Ratio Rao Avio Fox Parang Nilte Quiete Viper Freelame59 -
Lame d'autore - Numero 58 - Febbraio - Anno 2013 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 80 Pagine PROFILI Pekka Tuominen Marco Selis STORIA Coltelli Toscani TEST Fallkniven GP Fox Tracker Meskwaki Morris Friction Folder Kallioniemi Puukko Maserin Atti Mtech Mini Rockstead Higo-J Spyderco Pingo Viper David e Golia FAI DA TE Picchetto e tensionatore d'emergenza REPORTAGE Cic Show e Culter Expolame58 -
CRKT - Carson M16-14SFG - Special Forces Big Dog G10 knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: Stainless steel 8Cr14MoV to 58-60 HRC
Blade treatment: Ti-Ni
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 135mm.
Total length: 235mm.
Thick when closed: 17mm.
Balancing: -
Weight: 180g.
Closure: Liner Lock with auto-LAWKS locking system
Clip: stainless steel
Sheath: -
Packaging: cardboard box with CRKT logos
Note: -CM16-14SFG -
CRKT - Folts Minimalist Bowie - 2387 - Coltello
Destinazione d'uso: Neck Knife
Tipo di produzione: Industriale
Produzione Lama: China
Lama: in acciaio inox 5Cr15MoV 55/57HRC
Trattamento Lama: -
Manicatura: Micarta
Lunghezza lama: 54mm.
Spessore lama: 2.7mm.
Lunghezza chiuso: -
Lunghezza totale: 130mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 45g.
Chiusura: -
Clip: -
Fodero: Nylon
Confezione: Scatola di cartone con loghi CRKT
Note: Design dy Alan FoltsC2387 -
CRKT - Ripple Black Liner Lock by Ken Onion - K415KXP - Coltello
Destinazione d'uso: Sportivo / EDC
Tipo di produzione: Industriale
Paese di produzione: China
Lama: In acciaio inox 8Cr14MoV
Finitura lama: Satinatura
Manicatura: Alluminio Aeronautico
Lunghezza lama: 80mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 110mm.
Lunghezza totale: 185mm.
Spessore da chiuso: 8mm.
Peso: 66g.
Chiusura: Liner Lock
Clip: amovibile, in acciaio inox
Confezione: scatola in cartone con loghi CRKT
Note: Versione First Production Run - Sistema di apertura IKBS (Ikoma Korth Bearing System) su cuscinetti a sfera - Design by Ken Onion3803 -
Lame d'autore - Numero 1 - Anno 2003 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). Ottima qualità grafica, contenuti discretamente documentati, precisi e aggiornati. Alta qualità illustrativa - Pag 80L2003-1 -
Lame d'autore - Numero 2 - Anno 2003 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). Ottima qualità grafica, contenuti discretamente documentati, precisi e aggiornati. Alta qualità illustrativa - Pag 80L2003-2 -
Lame d'autore - Numero 24 - Ottobre/Novembre/Dicembre 2004 - rivista
Lame d'autore - Numero 24 - Ottobre/Novembre/Dicembre 2004
TEST:
* Conaz - Gobbi
* Surefire - Alpha e Bravo
* Multi Tool Militari
* Fox - Sheridan - vedi la scheda prodotto
* Viper - Serie Caccia - vedi la scheda prodotto
PERSONAGGI:
* Mick Penfold
* Angelo Scotti
ED INOLTRE:
* Lame orientali Citadel
* Le Roncole
* Come nasce un grande coltelloL2004-24 -
Lame d'autore - Numero 25 - Gennaio/Febbraio/Marzo 2005 - rivista
TEST:
* Boker - Voros Neck Knife
* Thiers Issard Sabatier - Regionali francesi
* Fallkniven - TK3 - vedi la scheda prodotto
* Fox - Karambit - vedi la scheda prodotto
PERSONAGGI:
* Rick Bowles
* Ettore Gianferrari
* Fabrizio "Silvester" Silvestrelli
ED INOLTRE:
* I Maestri del Knife Fighting
* Culter Expo
* Show di MilanoL2005-25