Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
La Cantina - Khorakhané Custom Knife - ApexUltra & Ironwood - Handcrafted Knife
Type of Production: Handcrafted
Blade Production: Italy
Blade: Apex Ultra steel at 63HRC
Blade Finish: Stone Washed
Handle: Ironwood, G10, and carbon pins
Blade Length: 90mm
Blade Thickness: 4.8mm
Total Length: 204mm
Balance: Set back 3cm from the guard branch
Weight: 179g
Sheath: Hand-stitched and crafted leather
Notes: unique knife handcrafted for Coltelleria Collini of Busto Arsizio - No. 310LC-KK-IW -
La Cantina - Khorakhané Custom Knife - ApexUltra & Birch - Handcrafted Knife
Type of Production: Handcrafted
Blade Production: Italy
Blade: Apex Ultra steel at 63HRC
Blade Finish: Stone Washed
Handle: Stabilized Birch, G10, and carbon pins
Blade Length: 90mm
Blade Thickness: 4.8mm
Total Length: 204mm
Balance: shifted 3cm back from the guard branch
Weight: 179g
Sheath: hand-stitched and crafted leather
Packaging and Certificate: Cordura case and authenticity certificate
Notes: unique knife handcrafted for Coltelleria Collini of Busto Arsizio - No. 309LC-KK-BC -
La Cantina - Mini Jones custom knife - Sleipner Steel - Black Birch and Fatcarbon - handmade knife
Production Type: Artisan
Blade Production: Italy
Blade: Sleipner steel at 60HRC
Blade Finish: PVD
Handle: Black Stabilized Birch with FatCarbon Darkmatter guard and carbon pins
Blade length: 115mm.
Blade thickness: 6mm.
Total length: 244mm.
Balance: set back 3cm from the guard branch
Weight: 265g.
Scabbard: handcrafted and hand-stitched leather
Package and certificate: cordura pouch and certificate of authenticity
Notes: unique knife and handcrafted for Coltelleria Collini in Busto Arsizio - no. 253LC-MJ-BNF -
Higonokami - Kanekoma knife - Black Small Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural tools, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 92mm.
Blade length: 76mm.
Blade thickness: 2.7mm
Open length: 155mm
Weight: 33g.
Note:HIGO-06BL€21.31Only 11 left -
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 75mm.
Blade thickness: 3mm
Overall length: 172mm
Weight: 42g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO07SL€23.77Only 4 left -
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 65mm.
Blade thickness: 3mm
Overall length: 153mm
Weight: 46g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO-06SL€21.31Only 12 left -
Higonokami - Sadakoma Higo in black leather - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratoryFascinating knife used by the Japanese farmer "Higonokami kanekoma."
As is typical for many agricultural tools, this Japanese knife turns out to be extremely simple but the result of centuries of refinement that has found the difficult balance between form and function, and between cost and benefit.
The main feature definitely turns out to be the quality of the blade, in fact it uses a three-layer San Mai steel of which the one in the center is extremely hard.
Production: Japanese craftsmanship
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc
Handle: brass foil with elegant black leather cover
Closure: without blade lock
Length closed: 120mm.
Blade length: 90mm.
Blade thickness: 3mm
Length open: 210mm
Weight: 72g.
Notes: lubricate the blade well otherwise easily subject to oxidation.
Packaging: elegant and fine wooden box with Japanese ideograms.018208-CP€0.00Only -20 leftOut of stock -
La Cantina - Coda Di Lupo Custom Knife - RWL34 & Snakewood - Custom Knife
Type of production: Artisan
Country of production: Italy
Blade: RWL34 stainless steel at 60HRC
Blade finish: Satin finish
Handle: Snakewood with white G10 fibres, steel edges and titanium spacer
Blade length: 85mm.
Blade thickness: 3.2mm.
Total length: 198mm.
Closed length: 115mm.
Weight: 105g.
Locking system: liner lock
Clip: removable, titanium
Packaging and certificate: cordura case and certificate of authenticity
Notes: unique knife handcrafted for Coltelleria Collini in Busto Arsizio - n. 310LC-CDL-SW -
La Cantina - Don Raffaé - W2 Differentiated Tempering and Mango Wood - handcrafted knife
Intended Use: Collection / Light Utility
Type of production: Handcrafted
Country of Production: Italy
Blade: W2 steel at 60HRC
Blade finish: hamon made with selective tempering
Handle: mango wood, resin spacers and blue G10, 4mm carbon fiber pin
Blade length: 110mm.
Blade thickness: 4.8mm.
Total length: 235mm.
Weight: 210g.
Scabbard: leather, handmade
Packaging and certificate: cordura pouch and certificate of authenticity
Notes: unique and numbered knife, handcrafted especially for Coltelleria Collini - No. 297LC-DR-MN -
La Cantina - Don Raffaé - W2 Differentiated Tempering and Ebony Wood - handcrafted knife
Intended Use: Collection / Light Utility
Type of production: Handcrafted
Country of Production: Italy
Blade: W2 steel at 60HRC
Blade finish: hamon made with selective tempering
Handle: ebony wood, resin spacers and blue G10, 4mm carbon pin
Blade length: 110mm.
Blade thickness: 4.8mm.
Total length: 235mm.
Balance: backward
Weight: 210g.
Scabbard: leather worked and sewn by hand
Packaging and certificate: cordura pouch and certificate of authenticity
Notes: unique and numbered knife, handcrafted especially for Coltelleria Collini - No. 296LC-DR-EB -
La Cantina - Little Jones PVD custom knife - Sleipner Steel - Black Birch and Fatcarbon - handmade knife
Type of production: Artisan
Country of production: Italy
Blade: 60HRC Sleipner Steel
Blade Finish: PVD
Handle: Black Stabilised Birch with FatCarbon Darkmatter guard and carbon pins
Blade length: 150mm.
Blade thickness: 6mm.
Total length: 294mm.
Balance: on the guard branch
Weight: 360g.
Scabbard: hand worked and sewn leather
Packaging and certificate: Cordura pouch and certificate of authenticity
Notes: unique knife handcrafted for Coltelleria Collini in Busto Arsizio - no. 256LC-LJ-FCG -
La Cantina - Mini Jones PVD custom knife - Sleipner Steel - Light Birch and Fatcarbon - handmade knife
Type of production: Artisanal
Blade production: Italy
Blade: Sleipner steel at 60HRC
Blade finish: PVD
Handle: Light Stabilized Birch with FatCarbon Darkmatter guard and carbon pins
Blade length: 115mm.
Blade thickness: 6mm.
Total length: 244mm.
Balancing: set back 3cm from the guard branch
Weight: 270g.
Sheath: in worked and hand-stitched leather
Packaging and certificate: cordura case and certificate of authenticity
Notes: unique knife handcrafted for Collini Cutlery in Busto Arsizio - n. 252LC-MJ-BCF -
La Cantina - Little Jones custom knife - Sleipner Steel - Ironwood and Fatcarbon - handcrafted knife
Type of production: Artisanal
Blade production: Italy
Blade: Sleipner steel at 60HRC
Blade finish: satin
Handle: Ironwood with FatCarbon Darkmatter guard and carbon pins
Blade length: 150mm.
Blade thickness: 6mm.
Total length: 294mm.
Balancing: on the guard branch
Weight: 345g.
Sheath: in worked and hand-stitched leather
Packaging and certificate: cordura case and certificate of authenticity
Notes: unique knife handcrafted for Collini Cutlery in Busto Arsizio - n. 257LC-LJ-IF-1 -
La Cantina - Little Jones custom knife - Sleipner Steel - Light Birch and Fatcarbon - handmade knife
Type of production: Artisanal
Blade production: Italy
Blade: Sleipner steel at 60HRC
Blade finish: PVD
Handle: Light Stabilized Birch with FatCarbon Darkmatter guard and carbon pins
Blade length: 150mm.
Blade thickness: 6mm.
Total length: 294mm.
Balancing: on the guard branch
Weight: 360g.
Sheath: in worked and hand-stitched leather
Packaging and certificate: cordura case and certificate of authenticity
Notes: unique knife handcrafted for Collini Cutlery in Busto Arsizio - n. 255LC-LJ-BCF -
Higonokami - Kanekoma knife - Black Medium Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural implements, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 11mm.
Blade length: 72mm.
Blade thickness: 2.7mm
Open length: 170mm
Weight: 42g.
Note:HIGO-07BL€23.77Only 0 leftOut of stock -
Beretta K92 bullet knife
Beretta K92 bullet knife
Intended Use: Sport / Collection
Type of production: Industrial
Production Blade: Japan
Blade: Stainless steel AUS-8
Treatment Blade:
Handle: Grilon
Blade length: 85mm.
Blade thickness: 4mm.
Closed Length 125mm.
Overall length: 220mm.
Thick when closed: 14mm.
Balancing: -
Weight: 50g.
Lock: back lock
Clip: -
Sheath: -
Packaging: cardboard box with Beretta logos
Notes: -K92 -
Beretta - AirLight K Air 3GN - Knife
Intended Use: Sport / Collection
Type of production: Industrial
Production Blade: Japan
Blade: Stainless steel, three-layer laminate (VG2 and CoS to 60 HRC)
Treatment Blade:
Handle: Grilon
Blade length: 85mm.
Blade thickness: 3.5mm.
Closed Length 111mm.
Total length: 197mm.
Thick when closed: 24mm.
Balance: -
Weight: 170g.
Lock: Liner Lock
Clip: -
Sheath: -
Packaging: cardboard box with logos Fallkniven
Notes: -kar3gn -
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Charming knife used by the Japanese farmer " Higonokami kanekoma ."
As is typical for many agricultural tools , this Japanese knife is extremely simple but the result of a secular improvement that has found it difficult balance between form and function, and between cost and benefit.
The main feature is definitely the quality of the blade, in fact, uses a steel San Mai to three layers of which the one at the center rough .
It has a razor wire , as is appropriate for a tool to cut and not just born to be displayed in glass cases .
production: Japanese crafts
Blade : carbon steel, San Mai
Handle: black brass plate with elegant brown leather cover
Closure: Without lock blade
Closed Length : 120mm .
Blade length : 90mm .
Blade thickness : 3mm
Length open : 210mm
Weight: 72g .
Notes: lubricate the blade otherwise easily subject to oxidation .
Packing: elegant and fine wooden box with Japanese characters018209€0.00Only -20 leftOut of stock