Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Citadel - Fidel Buffalo Slipjoint Knife - 207CR - handmade knife
Intended use: collectible/sporting
Type of production: Handcrafted
Blade Production: Cambodia
Blade: DNH7 carbon steel selective hardening 40/60HRC
Blade Finish: mirror polished
Handle: water buffalo horn
Blade length: about 80mm.
Blade thickness: about 3mm.
Length closed: about 113m.
Total length: about 190mm.
Thickness when closed: about 17mm.
Balance: -
Weight: about 58g.
Closure: -
Clip: -
Sheath: leather pouch
Packaging: -
Notes: each knife is handmade and differs minimally in size, weights and aestheticsCI-207CR -
Citadel - Lancha Rayskin White knife - handmade knife
Intended use: sports / collection
Type of production: Artisan
Production Lama: Cambodia
Blade: in DNH7 carbon steel with 40 / 60HRC selective hardening
Blade treatment: -
Handle: stingray leather
Blade length: 90mm.
Blade thickness: 4mm.
Closed length: 120mm.
Total length: 210mm.
Thick when closed: 25mm.
Balancing: -
Weight: 188g.
Closure: liner lock
Clip: -
Sheath: cordura bag
Packaging: -
Note: -AP-CIT-LRW -
Citadel - Rossignoli Folder Big - friction folding knife - craft knife
Intended use: sports / collection
Type of production: Artisan
Production Lama: Cambodia
Blade: in DNH7 carbon steel with 40 / 60HRC selective hardening
Blade treatment: -
Handle: Water Buffalo Horn
Blade length: 95mm.
Blade thickness: 4mm.
Closed length: 137mm.
Total length: 205mm.
Thick when closed: 23mm.
Balancing: -
Weight: 146 g.
Closure: folding with friction
Clip: -
Sheath: Cordura bag
Packaging: -
Note: -CD4211 -
Citadel - Nordic hunter knife - 288 - craft knife
Citadel - Nordic
These handmade knives are distinguished by their original but functional line, which is well matched to the traditional manufacturing techniques and the materials used.
The blades are in fact carbon-hardened to a hardness of around 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire tempered at 60 HRC to have excellent cutting capacity, penetration and flexibility. The knife is then polished and sharpened by hand on stone and finished in every single detail.Blade: DNH7 "Bruit de forge" selective hardening 40/60 HRC steel with file-worked spine
handle: In wood with brass guard
Blade length: 70 mm.
Handle length: 115 mm.
Blade thickness: 3.5 mm.
Total length: 195 mm.
Sheath: Handmade brown leather
Weight: 154 g.CI-NORDIC -
Citadel - Japanese Aikuchi - Special Salamander - craft knife
aikuchi
processing
The blades are carbon-hardened to a hardness of about 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire is tempered at 60 HRC to have excellent cutting capacity, penetration and flexibility. The blade is then polished and sharpened by hand on stone and the knife is finished in every single detail.Type of production: Artisan
Country of production: Cambodia
Steel: carbon DNH7, hand forged, with hardened clay tempered at 60 / 40HRC
Habaki: copper
Tsuka: samekawa (breed skin)
Saya: Lacquered wood and water buffalo horn
Blade length: 170mm. (including habaki)
Total length: 275mm.
Weight: 210g. without sayaNote: Since these are handmade items and differ slightly in finishes from one another, the knife you ordered may not be identical to the one shown in the images.
CI-AI-SAL -
Jaguar - Set knives - 3 pieces vintage 90s knives
Year of production: 1990s
Type of production: industrial
Blade: 440A stainless steel
Country of production: Italy - Maniago
Handle: Rosewood - buffalo horn - deer - with mirror polished brass heads
Blade length: 69mm.
Blade thickness: 2.5mm.
Length closed: 82mm.
Total length: 146mm.
Weight: 70g.
Closure: Back Lock
Sheath:
Note: Jaguar is the trade name under which Maserin produced knives until the 90sJA-SET-3€110.66Out of stock -
Fantoni - HB01 by W. Harsey - M390 & Carbon Fiber - knife
Intended use: Tactical / Sports
Type of production: Industrial
Production Country: Italy
Blade: M390 61 / 62HRC stainless steel
Blade treatment: Stone Washed
Handle: Titanium and Carbon Fiber
Blade length: 107mm.
Blade thickness: 4mm.
Closed Length: 130mm.
Overall length: 240mm.
Thick when closed: 17mm.
Weight: 170g.
Lock: Liner Lock
Clip: Removable, titanium
Packaging: cardboard box
Notes: Opening with Carson Flipper system - Design by William W. HARSEYF-HB01-CF -
Fantoni - HB03 by W. Harsey - M390 & Brown G10 - knife
Intended use: Tactical / Sports
Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 61 / 62HRC
Blade treatment: Stone Washed
Grip: titanium folders and G-10 grips
Blade length: 94mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 206mm.
Thick when closed: 15mm.
Weight: 132g.
Closure: Liner Lock
Clip: Removable, titanium
Packaging: cardboard box with Fantoni logos
Notes: Opening via the Carson Flipper system - Design by William W. HarseyF-HB03-BR -
Kiku Matsuda Knives - Kawa Kaze KK01 en acero SanMai Cuchillo fijo - cuchillo artesanal
Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years he has collaborated with SOG, William Henry, Pro-Tech and Randall Kings, developing blades, sharpening and burring.
Uso previsto: Colección / Deportes
Tipo de producción: Artesano
Producción de Lama: Japón
Hoja: acero inoxidable SanMai SPG2 con 67 capas - 63/64 HRC
Tratamiento con cuchilla: -
Manija: Lona negra Micarta
Longitud de la hoja: 95 mm.
Espesor de la hoja: 3.9mm.
Longitud cerrada: -
Longitud total: 200 mm.
Espesor cuando está cerrado: -
Equilibrio: -
Peso: 132 g.
Cierre: -
Clip: -
Funda: en Kydex con ataque Tek-Lok
Paquete: -
Notas: En 2007, Kiku Matsuda ganó el prestigioso Blade Show "Cuchillo del año" con un proyecto creado en colaboración con SOG.KK01 -
Kiku Matsuda Knives - Southern Cross KM-760 Fixed Knife - craft knife
Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years he has collaborated with SOG, William Henry, Pro-Tech and Randall Kings, developing blades, sharpening and burring.
Intended use: Collection / Sports
Type of production: Artisan
Lama production: Japan
Blade: OU-31 carbon steel hardened to 63/64 HRC
Blade treatment: -
Handle: Black Canvas Micarta
Blade length: 80mm.
Blade thickness: 5.3mm.
Length closed: -
Total length: 195mm.
Thickness when closed: -
Balancing: -
Weight: 186g.
Closure: -
Clip: -
Sheath: in Kydex with Tek-Lok attack
Package: -
Notes: Kiku Matsuda won in 2007 the prestigious "Knife Of The Year Awards" Blade Show with a project realized in collaboration with SOGKM-760 -
Fantoni - HB03 by W. Harsey - M390 & Orange G10 - knife
Intended use: Tactical / Sports
Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 61 / 62HRC
Blade treatment: Stone Washed
Grip: titanium folders and G-10 grips
Blade length: 94mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 206mm.
Thick when closed: 15mm.
Weight: 132g.
Closure: Liner Lock
Clip: Removable, titanium
Packaging: cardboard box with Fantoni logos
Notes: Opening via the Carson Flipper system - Design by William W. HarseyF-HB03-OR -
Kiku Matsuda Knives - Back Up Neo 300 Fixed Blade Knife - craft knife
Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years he has collaborated with SOG, William Henry, Pro-Tech and Randall Kings, developing blades, sharpening and burring.
Purpose of use: Collection / Sportsman
Type of production: Artisan
Blade Production: Japan
Blade: OU-31 carbon steel hardened to 63/64 HRC
Blade Treatment: -
Manicure: Black Canvas Micarta
Blade Length: 140mm.
Blade thickness: 6.5mm.
Closed length: -
Total Length: 270mm.
Closure thickness: -
Balance: -
Weight: 384g.
Closure: -
Clip: -
Sheath: in Kydex with Tek-Lok attachment
Packing: -
Notes: Kiku Matsuda won the prestigious prize at the Blade Show "Knife Of The Year Awards" in 2007 with a project made in collaboration with SOGKM-300 -
Kiku Matsuda Knives - Back Up Zero 490 Fixed Blade Knife - artisan knife
Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years he has collaborated with SOG, William Henry, Pro-Tech and Randall Kings, developing blades, sharpening and burring.
Purpose of use: Collection / Sportsman
Type of production: Artisan
Blade Production: Japan
Blade: OU-31 carbon steel hardened to 63/64 HRC
Blade Treatment: -
Manicure: Green Canvas Micarta
Blade Length: 98mm.
Blade thickness: 5.5mm.
Closed length: -
Total length: 200mm.
Closure thickness: -
Balance: -
Weight: 250g.
Closure: -
Clip: -
Sheath: in Kydex with Tek-Lok attachment
Packing: -
Notes: Kiku Matsuda won the prestigious award at the Blade Show "Knife Of The Year Awards" in 2007 with a project made in collaboration with SOG KnivesKM-490 -
Kiku Matsuda Knives - J Defender Fixed Blade - custom knife
Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years, he has worked with SOG, William Henry, Pro-Tech and Randall Kings for blades, sharpening and burring.
Purpose: Collection / Sportsman
Type of production: Artisan
Blade Production: Japan
Blade: OU-31 carbon steel hardened to 63/64 HRC
Blade treatment: acidification with subsequent polishing and polishing of the wire
Handle: G10
Blade Length: 135mm.
Blade thickness: 4.5mm.
Total length: 250mm.
Weight: 186g.
Sheath: in thermoformed Kydex, with Tek-Lok attachment
Packing: cardboard box with Kiku Knives logos
Notes: Kiku Matsuda won the prestigious award at the Blade Show "Knife Of The Year Awards" in 2007 with a project made in collaboration with SOG KnivesKM-730 -
Jaguar - machete handle with deer - Vintage knife
Year of production: 90 Years
Type of production: Industrial
Blade: 440A Stainless steel
Country of production: Italy - Maniago
Handle: Stag
Blade length: 370mm.
Blade Thickness: 4mm.
Overall length: 570mm.
Weight: 994g.
Sheath:
Notes: Jaguar is the brand name under which Maserin produced knives until the 90Ja-fisso€311.48Out of stock -
Fantoni - Hide Folder by T. Rumici - two hands opening - buffalo horn - knife
Intended use: Utility / Collection
Type of production: Industrial
Blade: CPM-S30V stainless steel 61-62HRC
Blade treatment: Stone-Washed
Country of production: Maniago - Italy
Handle: buffalo horn
Blade length: 75mm.
Blade thickness: 3.2mm.
Closed Length: 102mm.
Overall length: 178mm.
Weight: 109g.
Lock: Back Lock
Clip: reversible, stainless steel
Notes: two-handed blade opening - Design by T. Rumici12644 -
Fantoni - HB01 by W. Harsey - Oramge G10 - knife
Intended use: Tactical / Sports
Type of production: Industrial
Production Country: Italy
Blade: CPM-S35VN Steel 60 / 61HRC
Blade treatment: Stone Washed
Handle: Titanium and G-10
Blade length: 107mm.
Blade thickness: 4mm.
Closed Length: 130mm.
Overall length: 240mm.
Thick when closed: 17mm.
Weight: 170g.
Lock: Liner Lock
Clip: Removable, titanium
Packaging: cardboard box
Notes: Opening with Carson Flipper system - Design by William W. HARSEY1328OR -
Fantoni - HB03 by W. Harsey - Dark Green G10 - knife
Intended use: Tactical / Sports
Type of production: Industrial
Production Country: Italy
Blade: stainless steel CPM-S35VN 61 / 62HRC
Blade treatment: Stone Washed
Handle: Titanium and G-10
Blade length: 94mm.
Blade thickness: 4mm.
Closed Length: 116mm.
Overall length: 206mm.
Thick when closed: 15mm.
Weight: 132g.
Lock: Liner Lock
Clip: Removable, titanium
Packaging: cardboard box with logos Fantoni
Notes: Opening via Carson Flipper system - Design by William W. HARSEY12368DG -
Jaguar - lockable brass with wooden insert 411 - Knife
Year of production: 90s
Type of production: Industrial
Blade: 440A Stainless steel
Country of production: Italy - Maniago
Handle: brass and wood
Blade length: 48mm.
Blade Thickness: 2.5mm.
Closed Length: 66mm.
Overall length: 110mm.
Weight: 38g.
Lock: Back Lock
Sheath:
Notes: Jaguar is the brand name under which Maserin produced knives until the 90ja-411€22.13Out of stock -
Jaguar - Pocket lockable wooden 710 - Knife
Year of production: 90s
Type of production: Industrial
Blade: 440A Stainless steel
Country of production: Italy - Maniago
Handle: Wood with polished brass heads mirrorBlade length: 40 mm.
Blade Thickness: 2mm.
Closed Length: 57mm.
Overall length: 130mm.
Weight: 32g.
Lock: Back Lock
Sheath:
Notes: Jaguar is the brand name under which Maserin produced knives until the 90ja-710€20.49Out of stock -
Jaguar - Pocket lockable wooden 708 - Knife
Year of production: 90s
Type of production: Industrial
Blade: 440A Stainless steel
Country of production: Italy - Maniago
Handle: Rosewood with polished brass heads mirrorBlade length: 40 mm.
Blade Thickness: 2mm.
Closed Length: 57mm.
Overall length: 130mm.
Weight: 32g.
Lock: Back Lock
Sheath:
Notes: Jaguar is the brand name under which Maserin produced knives until the 90ja-708€20.49Out of stock -
Jaguar - Pocket lockable wooden 709 - knife
Year of production: 90'
Type of production: Industrial
Blade: 440A Stainless steel
Country of production: Italy - Maniago
Handle: Rosewood with heads in Nickel silver polishedBlade length: 40 mm.
Blade Thickness: 2mm.
Closed Length: 57mm.
Overall length: 130mm.
Weight: 34g.
Lock: Back Lock
Sheath:
Notes: Jaguar is the brand name under which Maserin produced knives until the 90'ja-709€20.49Out of stock -
Fantoni - HB Fixed G10 Black PVD - Design by W. Harsey - messer
Intended use: Tactical / Collection
Type of production: Industrial
Blade: CPM-S35VN stainless steel 61-62HRC
Blade treatment: Black PVD
Production Lama: Italy
Handle: Micarta type Loveless
Blade length: 90mm.
Blade Thickness: 4mm.
Closed Length: -
Overall length: 200mm.
Balancing: backward to 2 cm. the branch of the lower guard
Weight: 124g.
Closed: -
Clip: -
Sheath: Kydex with Tech Lock
Notes: Design by W. HARSEY11093B -
Fantoni - HB Fixed by W. Harsey - Black G10 - knife
Intended use: Tactical / Collection
Type of production: Industrial
Blade: CPM-S35VN stainless steel 61-62HRC
Blade treatment: Stone Washed
Country of production: Italy
Handle: Black G10
Blade length: 90mm.
Blade Thickness: 4mm.
Overall length: 200mm.
Balancing: backward to 2 cm. the branch of the lower guard
Weight: 124g.
Sheath: Leather
Notes: Design by W. HARSEY11093 -
Jaguar - Chiudibile in legno con testine in alpacca - Coltello Vintage Anni '90
Anno di produzione: Anni '90
Tipo di produzione: industriale
Lama: in acciaio inox 440A
Paese di produzione: Italia - Maniago
Manicatura: Legno di palissandro con testine in Alpacca lucidato a specchio
Lunghezza lama: 73mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 107mm.
Lunghezza totale: 180mm.
Peso: 72g.
Chiusura: Back Lock
Fodero: In nylon nero, con chiusura in Velcro
Note: Jaguar è il nome commerciale con cui Maserin produceva coltelli fino agli anni '9012572€31.97Only -99 leftOut of stock -
Citadel - Phan Theit Water knife - Friction folder Bufalo - handmade knife
Intended use: collection / sports
Type of production: Artisan
Production Lama: Cambodia
Blade: DNH7 carbon steel
Blade treatment: -
Handle: Water Buffalo Horn
Blade length: about 76mm.
Blade thickness: about 3mm.
Closed length: about 103mm.
Total length: about 180mm.
Thick when closed: about 15mm.
Balancing: -
Weight: about 120g.
Closure: without blade lock
Clip: -
Sheath: cordura bag
Packaging: -
Note: -CIT-PTW -
Kiku Matsuda Knives - Karambit Desperade - handmade knife
Kiku Matsuda is one of the most famous artists and scholars sharpening throughout Japan; probably in your collection is already a fruit knife of his passion: collaborates for several years with SOG, William Henry, Pro-Tech and Randall Kings developing to their bevels, and politure sharpening the blades.
Intended Use: Collection / TacticalType of production: Handmade
Production Country: Japan
Blade: D2 hardened carbon steel to 61 HRC
Handle: Green Canvas Micarta
Blade length: 113mm.
Blade thickness: 5mm.
Overall length: 232mm.
Balancing: Set back
Weight: 210g.
Sheath: Kydex with Tek-Lok attack
Notes: Kiku Matsuda won in 2007 the prestigious prize at the Blade Show "Knife Of The Year Awards" with a project carried out in collaboration with SOG Knives12508 -
Fantoni - Hide Fixed Micarta - Leather Sheath - Design by T. Rumici - knife
Intended use: Fighter / Tactical / Collection
Type of production: industry
Blade: stainless steel CPM-S30V to 61-62HRC
Blade reatment: Stone Washed
Production Country: Italy
Handle: Micarta Loveless type
Blade length: 80mm.
Blade Thickness: 4mm.
Overall length: 170mm.
Balancing: back to 1cm. from the branch of the lower guard
Weight: 69g.
Sheath: leather, entirely Made in Italy
Notes: Design by T. Rumici12405 -
Fantoni - HB03 Flipper by William W. Harsey - CPM-S35VN & Black G10 - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel CPM-S35VN 61/62HRC
Blade Treatment: Stone Washed
Handle: Titanium and G-10
Blade Length: 94mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 206mm.
Thickness when closed: 15mm.
Weight: 132g.
Closure: LinerLock in titanium
Clip: Removable and reversible, in titanium
Package: Cardboard box with Fantoni logos
Notes: Opening by Carson Flipper system - Design by William W. Harsey12368 -
Kiku Matsuda Knives - Momose Gawa Fishing Knife KM-390 - Knife
Kiku Matsuda Knives - Momose Gawa Fishing Knife KM-390 - Knife
Kiku Matsuda is a great fisherman and model Momose Gawa is his favorite for fishing in the river.
Intended use: Sport / Fishing
Type of production: Artisan
Production Lama: Japan
Blade: stainless steel 14C28N
Treatment Lama: acid
Handle: Black Canvas Micarta
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: -
Overall length: 170mm.
Thick when closed: -
Balancing: -
Weight: 74g.
Closing: -
Clip: -
Sheath: Kydex attack with Tek-Lok
Packaging: -
Notes: Kiku Matsuda won in 2007 the prestigious prize at the Blade Show "Knife Of The Year Awards" with a project in collaboration with SOG KnivesKM-390 -
Kiku Matsuda Knives - Knife KM-340 - craft knife
Kiku Matsuda Knives - Knife KM-340 - craft knife
Intended Use: Collection / Sports / Tactical
Unique and no longer produced by Kiku
Type of production: Artisan
Production Lama: Japan
Blade: carbon steel 61HRC D2
Treatment Lama: acid
Handle: Black G10
Blade length: 195mm.
Blade thickness: 5mm.
Length closed: -
Overall length: 340mm.
Thick when closed: -
Balancing: -
Weight: 440g.
Closing: -
Clip: -
Sheath: Kydex attack with Tek-Lok
Packaging: -
Notes: Kiku Matsuda won in 2007 the prestigious prize at the Blade Show "Knife Of The Year Awards" with a project in collaboration with SOG KnivesHK-340 -
Kiku Matsuda Knives - Yuki Kaze Knife KM-460 - craft knife
Kiku Matsuda Knives - Yuki Kaze Knife KM-460 - craft knife
Intended Use: Collection / Sports / Tactical
Type of production: Artisan
Production Lama: Japan
Blade: carbon steel OU-31 hardened to 63/64 HRC
Treatment Lama: -
Handle: Black Canvas Micarta
Blade length: 176mm.
Blade thickness: 6,8mm.
Length closed: -
Overall length: 314mm.
Thick when closed: -
Balancing: -
Weight: 486g.
Closing: -
Clip: -
Sheath: Kydex attack with Tek-Lok
Packaging: -
Notes: Kiku Matsuda won in 2007 the prestigious prize at the Blade Show "Knife Of The Year Awards" with a project in collaboration with SOG KnivesKM-460 -
Fantoni - Hide Folder - Orange G10 - Limited Edition - Design by T. Rumici - knife
Intended Use: Sport / Tactical / Collection
Type of production: Industrial
Blade: Stainless steel CPM-S30V 61-62HRC
Treatment Lama: Stone-Washed
Production Lama: Italy
Handle: G10 Orange
Blade length: 75mm.
Blade Thickness: 3.2mm.
Closed Length: 102mm.
Overall length: 178mm.
Balancing: -
Weight: 109g.
Closure: Back Lock
Clip: Reversible, Steel
Notes: Design by Rumici T. and M. Fantoni - First production run limited edition in just 25 numbered pieces of blade and box.12293 -
Fantoni - Hide Folder G10 - Limited Edition # 23/25 - Design by T. Rumici - knife
Intended Use: Sport / Tactical / Collection
Type of production: Industrial
Blade: Stainless steel CPM-S30V 61-62HRC
Treatment Lama: Stone-Washed
Production Lama: Italy
Handle: G10 Black
Blade length: 75mm.
Blade Thickness: 3.2mm.
Closed Length: 102mm.
Overall length: 178mm.
Balancing: -
Weight: 109g.
Closure: Back Lock
Clip: Reversible, Steel
Notes: Design by Rumici T. and M. Fantoni - First production run limited edition in just 25 numbered pieces of blade and box. Exemplary number 23 of 25.12291 -
Jaguar - campeggio 522 - coltello
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: 420
Trattamento Lama: Satinata
Manicatura: legno
Lunghezza lama: 100mm.
Spessore lama: 2.5mm.
Lunghezza totale: 200mm.
Peso: 65g.
Chiusura: back lock
Clip: -
Confezione: -
Note: -jaguar€24.59Out of stock -
Fantoni - HB Fixed G10 - Design by W. Harsey - knife
Destinazione d'uso: Tattico/Collezione
Tipo di produzione: industriale
Lama: in acciaio inox CPM-S35VN a 61-62HRC
Trattamento Lama: Stone Washed
Produzione Lama: Italia
Manicatura: Micarta tipo Loveless
Lunghezza lama: 90mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 200mm.
Bilanciatura: arretrata a 2 cm. dal ramo di guardia inferiore
Peso: 124g.
Chiusura: -
Clip: -
Fodero: in Kydex, con attacco tipo Tek-Lok
Note: Design by W. Harsey12267 -
Kiku Matsuda Knives - Hasinau Kamui Master Hunters - craft knife
Kiku Matsuda è uno dei più famosi artisti e studiosi dell'affilatura di tutto il Giappone; probabilmente nella vostra collezione sarà già presente un coltello frutto della sua passione: collabora infatti da diversi anni con SOG, William Henry, Pro-Tech e Randall Kings sviluppando per loro bisellature, affilature e politure delle lame.
Destinazione d'uso: Collezione/Caccia
Tipo di produzione: Artigianale
Produzione Lama: Giappone
Lama: in acciaio al carbonio OU-31 temprato a 63/64 HRC
Trattamento Lama: -
Manicatura: G10 Black
Lunghezza lama: 130mm.
Spessore lama: 5,0mm.
Lunghezza chiuso: -
Lunghezza totale: 260mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 360g.
Chiusura: -
Clip: -
Fodero: in Kydex con attacco Tek-Lok
Confezione: -
Note: Questo coltello è stato disegnato dal giapponese Mr. Chujyo di Hokkaido - Kiku Matsuda ha vinto nel 2007 il prestigioso premio al Blade Show "Knife Of The Year Awards" con un progetto realizzato in collaborazione con SOG KnivesKnife Of The Year Awards Knife Of The Year AwardsKM-500A -
Kiku Matsuda Knives - Blast Fixed Blade - custom knife
Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years, he has worked with SOG, William Henry, Pro-Tech and Randall Kings for blades, sharpening and burring.
Purpose: Collection / Sportsman
Type of production: Artisan
Blade Production: Japan
Blade: OU-31 carbon steel hardened to 63/64 HRC
Blade treatment: acidification with subsequent polishing and polishing of the wire
Handle: Black Canvas Micarta
Blade Length: 150mm.
Blade thickness: 5.8mm.
Total Length: 275mm.
Weight: 390g.
Sheath: in thermoformed Kydex, with Tek-Lok attachment
Packing: cardboard box with Kiku Knives logos
Notes: Kiku Matsuda won the prestigious award at the Blade Show "Knife Of The Year Awards" in 2007 with a project made in collaboration with SOG KnivesKM-215 -
Kiku Matsuda Knives - Aoba Fixed Blade Knife - craft knife
Kiku Matsuda è uno dei più famosi artisti e studiosi dell'affilatura di tutto il Giappone; probabilmente nella vostra collezione sarà già presente un coltello frutto della sua passione: collabora infatti da diversi anni con SOG, William Henry, Pro-Tech e Randall Kings sviluppando per loro bisellature, affilature e politure delle lame.
Destinazione d'uso: Collezione/Sportivo
Tipo di produzione: Artigianale
Produzione Lama: Giappone
Lama: in acciaio al carbonio OU-31 temprato a 63/64 HRC
Trattamento Lama: -
Manicatura: Black Canvas Micarta
Lunghezza lama: 105mm.
Spessore lama: 5,5mm.
Lunghezza chiuso: -
Lunghezza totale: 215mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 260g.
Chiusura: -
Clip: -
Fodero: in Kydex con attacco Tek-Lok
Confezione: -
Note: Kiku Matsuda ha vinto nel 2007 il prestigioso premio al Blade Show "Knife Of The Year Awards" con un progetto realizzato in collaborazione con SOG KnivesKnife Of The Year Awards Knife Of The Year AwardsAB31 -
Kiku Matsuda Knives - Back Up Small Fixed Blade Knife - craft knife
Kiku Matsuda è uno dei più famosi artisti e studiosi dell'affilatura di tutto il Giappone; probabilmente nella vostra collezione sarà già presente un coltello frutto della sua passione: collabora infatti da diversi anni con SOG, William Henry, Pro-Tech e Randall Kings sviluppando per loro bisellature, affilature e politure delle lame.
Destinazione d'uso: Collezione/Sportivo
Tipo di produzione: Artigianale
Produzione Lama: Giappone
Lama: in acciaio al carbonio OU-31 temprato a 63/64 HRC
Trattamento Lama: -
Manicatura: Green Canvas Micarta
Lunghezza lama: 98mm.
Spessore lama: 5,5mm.
Lunghezza chiuso: -
Lunghezza totale: 200mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 250g.
Chiusura: -
Clip: -
Fodero: in Kydex con attacco Tek-Lok
Confezione: -
Note: Kiku Matsuda ha vinto nel 2007 il prestigioso premio al Blade Show "Knife Of The Year Awards" con un progetto realizzato in collaborazione con SOG KnivesKnife Of The Year Awards Knife Of The Year AwardsBUP-MN -
Fantoni - William W. Harsey HB 01 Dark Green - knife
Intended use: Tactical / Sport
Type of production: Industrial
Production Blade: Italy
Blade: CPM-S35VN steel 60/61HRC
Treatment Blade: Stone Washed
Handle: Titanium and G-10
Blade length: 107mm.
Blade thickness: 4mm.
Closed Length: 130mm.
Overall length: 240mm.
Thick when closed: 17mm.
Balancing: -
Weight: 170g.
Lock: Liner Lock
Clip: Removable, titanium
Sheath: -
Packaging: cardboard box
Notes: Design by William W. Harsey12018 -
Fantoni - William W. Harsey HB 01 CPM-125V limited edition - knife
Fantoni - William W. Harsey HB 01 CPM-125V limited edition - knife
Intended use: Tactical / Sport
Type of production: Industrial
Production Blade: Italy
Blade: Stainless CPM-125V 62/63HRC
Treatment Blade: Stone Washed
Handle: Titanium and G-10
Blade length: 107mm.
Blade thickness: 4mm.
Closed Length: 130mm.
Overall length: 240mm.
Thick when closed: 17mm.
Balancing: -
Weight: 170g.
Lock: Liner Lock
Clip: Removable, titanium
Sheath: -
Packaging: cardboard box
Notes: Design by William W. Harsey - limited edition of 100 pieces1328-S125V -
Citadel - Stavanger Green Grey Ray Skin - custom knife
WARNING: technical data of the knife are approximate and vary from knife to knife these are handmade products.
Intended Use: collection / sports
Production Type: Handmade
Production Blade: Cambodia
Blade: carbon steel DNH7
Treatment Lama: -
Handle: stingray leather
Blade length: about 50mm.
Blade thickness: approx 4mm.
Closed Length: about 82mm.
Total length: about 145m.
Thick when closed: about 15mm.
Balance: -
Weight: about 78g.
Lock: Liner lock
Clip: -
Sheath: sheath
package:
Notes: -10632 -
Citadel - Baltaka Knife - custom knife
These handmade knives are distinguished by their original line, but functional, well that is coupled alletradizionali manufacturing techniques and materials used.
The blades are in fact hardened coal until Adavere a hardness of about 40 HRC after which, after having been hand-hammered, back and sides are covered with clay and the wire refreshed to 60 HRC to have excellent cutting capacity, flexibility and penetration. The knife is then polished and sharpened by hand on stone and finished in every detail.Blade: Stainless DNH7
manicatura: wood
Blade length: 130 mm.
Handle Length: 70 mm.
Blade Thickness: 4.5 mm.
Total length: 270 mm.
Sheath: Leather brown handmade
Weight: 106 g.Note: Being craft knives, and finishes for slightly differing from each other, the knife itself may not be identical to that represented in the images.
10636 -
Citadel - True Knife - custom knife
These handmade knives are distinguished by their original line, but functional, well that is coupled alletradizionali manufacturing techniques and materials used.
The blades are in fact hardened coal until Adavere a hardness of about 40 HRC after which, after having been hand-hammered, back and sides are covered with clay and the wire refreshed to 60 HRC to have excellent cutting capacity, flexibility and penetration. Each knife is then polished and sharp hand-polished and finished in every detail.Blade: Stainless DNH7
manicatura: Micarta
Blade length: 60 mm.
Handle Length: 70 mm.
Blade thickness: 4 mm.
Total length: 164 mm.
Sheath: Leather brown handmade with horizontal mounting of the knife
Weight: 122 g.Note: Being craft knives, and finishes for slightly differing from each other, the knife itself may not be identical to that represented in the images.
10635 -
Citadel - Ola in plane tree wood - custom knife
WARNING: technical data of the knife are approximate and vary from knife to knife these are handmade products.
Intended Use: collection / sports
Production Type: Handmade
Production Blade: Cambodia
Blade: carbon steel DNH7
Treatment Lama: -
Handle: wood plane
Blade length: about 80mm.
Blade thickness: approx 4mm.
Closed Length: about 120mm.
Total length: about 210mm.
Thick when closed: about 20mm.
Balance: -
Weight: about 166g.
Lock: Liner lock
Clip: -
Sheath: -
Packaging: bag Cordura
Notes: -10634 -
Citadel - Friction Folder wood - custom knife
WARNING: technical data of the knife are approximate and vary from knife to knife these are handmade products.
Intended Use: collection / sports
Production Type: Handmade
Production Blade: Cambodia
Blade: carbon steel DNH7
Treatment Lama: -
Handle material: wood
Blade length: about 65mm.
Blade thickness: about 2mm.
Closed Length: about 154mm.
Total length: about 185mm.
Thick when closed: about 13mm.
Balance: -
Weight: about 68g.
Closing: -
Clip: -
Sheath: -
Packaging: bag Cordura
Notes: -10633 -
Citadel - Friction Folder - custom knife
WARNING: technical data of the knife are approximate and vary from knife to knife these are handmade products.
Intended Use: collection / sports
Production Type: Handmade
Production Blade: Cambodia
Blade: carbon steel DNH7
Treatment Lama: -
Handle material: wood
Blade length: about 65mm.
Blade thickness: about 2mm.
Closed Length: about 154mm.
Total length: about 185mm.
Thick when closed: about 13mm.
Balance: -
Weight: about 68g.
Closing: -
Clip: -
Sheath: -
Packaging: bag Cordura
Notes: -10362 -
Citadel - Nordic Inciso - 287 - coltello artigianale
Citadel - Nordic Big
Questi coltelli artigianali si distinguono per la loro linea originale, ma funzionale, che ben si accoppia alletradizionali tecniche realizzative ed ai materiali impiegati.
Le lame vengono infatti temprate a carbone fino adavere una durezza di circa 40 HRC dopodich, dopo essere state martellate a mano, dorso e lati vengono rivestiti di argilla ed il filo ritemprato a 60 HRC per avere ottime capacit di taglio, penetrazione e flessibilit. Il coltello viene poi lucidato ed affilato a mano su pietra e rifinito in ogni singolo dettaglio.
Lama: Acciaio DNH7 "Bruit de forge" a tempra selettiva 40/60 HRC con dorso lavorato a lima
manicatura: In Bosso con inserti in Corno di bufalo, legno di Padouk e di Ebano
Lunghezza lama: 95 mm.
Lunghezza impugnatura: 125 mm.
Spessore della lama: 4 mm.
Lunghezza totale: 215 mm.
Fodero: Cuoio marrone lavorato a mano
Peso: 105 g.
Nota: Essendo coltelli artigianali, e differendo leggermente per finiture l'uno dall'altro, il coltello da voi ordinato potrebbe non essere identico a quello rappresentato nelle immagini.3921 -
Fantoni - William W. HARSEY HB 02 - Black PVD - knife
ntended use: Tactical / Sports
Type of production: Industrial
Production Lama: Italy
Blade: Stainless CPM-S35VN 61 / 62HRC
Treatment Lama: PVD
Handle: Titanium and G-10
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 100mm.
Overall length: 180mm.
Thick when closed: 15mm.
Balancing: -
Weight: 88g.
Lock: Liner Lock
Clip: Removable, titanium
Sheath: -
Packaging: cardboard box
Notes: Design by William W. HARSEY10019 -
Fantoni - D. Sinkevich C.U.T. Fixed Blade - Knife
Fantoni - D. Sinkevich C.U.T. Fixed Blade - Knife
Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel CPM-S30V 61/62HRC
Treatment Blade: Satin
Handle: G-10
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: -
Overall length: 228mm.
Thick when closed: 16mm
Balancing: -
Weight: 175g.
Closure: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos Fantoni
Notes: -7286F -
Fantoni - Hide Folder Buffalo - Design by T. Rumici - knife
Intended Use: Sport / Tactical / Collection
Type of production: Industrial
Blade: Stainless steel CPM-S30V 61-62HRC
Treatment Lama: Stone-Washed
Production Lama: Italy
Handle: Buffalo Horn
Blade length: 75mm.
Blade Thickness: 3.2mm.
Closed Length: 102mm.
Overall length: 178mm.
Balancing: -
Weight: 109g.
Closure: Back Lock
Clip: Reversible, Steel
Notes: Design by Rumici T. and M. Fantoni7282B -
Fantoni - Hide Folder by T. Rumici - Stag Horn - knife
Intended use: Utility / Collection
Type of production: Industrial
Blade: CPM-S30V stainless steel 61-62HRC
Blade treatment: Stone-Washed
Country of production: Maniago - Italy
Handle: stag horn
Blade length: 75mm.
Blade thickness: 3.2mm.
Closed Length: 102mm.
Overall length: 178mm.
Weight: 109g.
Lock: Back Lock
Clip: reversible, stainless steel
Notes: two-handed blade opening - Design by T. Rumici7282C -
Citadel - Aizto Bufalo - 305M - coltello artigianale
ATTENZIONE: i dati tecnici del coltello sono approssimativi e variano da coltello a coltello trattandosi di prodotti artigianali.
Destinazione d'uso: collezione/sportivo
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7 a tempra selettiva 40/60HRC
Trattamento Lama: -
Manicatura: Corno di Bufalo D'acqua
Lunghezza lama: circa 90mm.
Spessore lama: circa 4mm.
Lunghezza chiuso: circa 110mm.
Lunghezza totale: circa 200mm.
Spessore da chiuso: circa 18mm.
Bilanciatura: -
Peso: circa 80g.
Chiusura: -
Clip: -
Fodero: -
Confezione: -
Note: -3955 -
Citadel - Buddy Big - 217 - coltello artigianale
ATTENZIONE: i dati tecnici del coltello sono indicativi e, trattandosi di prodotti artigianali, variano da coltello a coltello.
Destinazione d'uso: collezione/sportivo
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7 a tempra selettiva 40/60HRC
Trattamento Lama: -
Manicatura: legno
Lunghezza lama: circa 80mm.
Spessore lama: circa 4mm.
Lunghezza chiuso: circa 198mm.
Lunghezza totale: circa 178mm.
Spessore da chiuso: circa 18mm.
Bilanciatura: -
Peso: circa 178g.
Chiusura: -
Clip: -
Fodero: busta in pelle
Confezione: -
Note: -3904G -
Citadel - Buddy Small - 216 - coltello artigianale
ATTENZIONE: i dati tecnici del coltello sono indicativi e, trattandosi di prodotti artigianali, variano da coltello a coltello.
Destinazione d'uso: collezione/sportivo
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7 a tempra selettiva 40/60HRC
Trattamento Lama: -
Manicatura: legno
Lunghezza lama: circa 73mm.
Spessore lama: circa 4mm.
Lunghezza chiuso: circa 100m.
Lunghezza totale: circa 170mm.
Spessore da chiuso: circa 16mm.
Bilanciatura: -
Peso: circa 46g.
Chiusura: -
Clip: -
Fodero: busta in pelle
Confezione: -
Note: -3904 -
Citadel - Camp Bufalo - 565 - coltello artigianale
ATTENZIONE: i dati tecnici del coltello sono approssimativi e variano da coltello a coltello trattandosi di prodotti artigianali.
Destinazione d'uso: collezione/sportivo
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7 a tempra selettiva 40/60HRC
Trattamento Lama: -
Manicatura: corno di bufalo
Lunghezza lama: circa 135mm.
Spessore lama: circa 5,5mm.
Lunghezza totale: circa 247mm.
Bilanciatura: -
Peso: circa 178g.
Chiusura: arretrata di 1,5 cm
Fodero: cuoio
Note: -3976 -
Citadel - Camp Knife - 171 - coltello artigianale
Citadel - Camp Knife
Questi coltelli artigianali si distinguono per la loro linea originale, ma funzionale, che ben si accoppia alletradizionali tecniche realizzative ed ai materiali impiegati.
Le lame vengono infatti temprate a carbone fino adavere una durezza di circa 40 HRC dopodichè, dopo essere state martellate a mano, dorso e lati vengono rivestiti di argilla ed il filo è ritemprato a 60 HRC per avere ottime capacità di taglio, penetrazione e flessibilità. Il coltello viene poi lucidato ed affilato a mano su pietra e rifinito in ogni singolo dettaglio.
Lama: Acciaio DNH7 "Bruit de forge" a tempra selettiva 40/60 HRC con dorso lavorato a lima
Manicatura: legno di palissandro
Lunghezza lama: 210 mm.
Spessore della lama: 5 mm.
Lunghezza totale:340 mm.
Peso: 265 g.
Bilanciatura: avanzata, a 25mm dalla guardia
Fodero: marrone, in cuoio, realizzato a mano
Nota: Essendo coltelli artigianali, e differendo leggermente per finiture l'uno dall'altro, il coltello da voi ordinato potrebbe non essere identico a quello rappresentato nelle immagini.3919 -
Citadel - Evo Nordic Big - 285 - coltello artigianale
Destinazione d'uso: caccia
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7 a tempra selettiva 40/60HRC
Trattamento Lama: -
Manicatura: palissandro, anelli di cuoio ed osso. guardia in silver nickel
Lunghezza lama: 94mm.
Spessore lama: 4.5mm.
Lunghezza chiuso: -
Lunghezza totale: 214mm.
Spessore da chiuso: -
Bilanciatura: arretrata, a 1cm.
Peso: 175g.
Chiusura: -
Clip: -
Fodero: Cuoio Marrone
Confezione: astuccio di cordura con chiusura zip e ricamo con logo Citadel
Note: l'immagine è a puro scopo esemplicativo in quanto ogni coltello, essendo artigianale, risulta essere unico e diverso dal precedente.3959 -
Citadel - Evo Nordic Small - 283 - coltello artigianale
Destinazione d'uso: caccia
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7 a tempra selettiva 40/60HRC
Trattamento Lama: -
Manicatura: palissandro, anelli di cuoio ed osso. guardia in silver nickel
Lunghezza lama: 81mm.
Spessore lama: 3.5mm.
Lunghezza chiuso: -
Lunghezza totale: 181mm.
Spessore da chiuso: -
Bilanciatura: arretrata, a 1cm.
Peso: 110g.
Chiusura: -
Clip: -
Fodero: Cuoio Marrone
Confezione: astuccio di cordura con chiusura zip e ricamo con logo Citadel
Note: l'immagine è a puro scopo esemplicativo in quanto ogni coltello, essendo artigianale, risulta essere unico e diverso dal precedente.3958 -
Citadel - Fidel - 207L - coltello artigianale
ATTENZIONE: i dati tecnici del coltello sono approssimativi e variano da coltello a coltello trattandosi di prodotti artigianali.
Destinazione d'uso: collezione/sportivo
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7 a tempra selettiva 40/60HRC
Trattamento Lama: -
Manicatura: legno
Lunghezza lama: circa 80mm.
Spessore lama: circa 3mm.
Lunghezza chiuso: circa 113m.
Lunghezza totale: circa 190mm.
Spessore da chiuso: circa 17mm.
Bilanciatura: -
Peso: circa 46g.
Chiusura: -
Clip: -
Fodero: busta in pelle
Confezione: -
Note: -3902 -
Citadel - Fidel Liner Bufalo - 207M - coltello artigianale
ATTENZIONE: i dati tecnici del coltello sono approssimativi e variano da coltello a coltello trattandosi di prodotti artigianali.
Destinazione d'uso: collezione/sportivo
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7
Trattamento Lama: -
Manicatura: Corno di Bufalo D'acqua
Lunghezza lama: circa 78mm.
Spessore lama: circa 3mm.
Lunghezza chiuso: circa 107mm.
Lunghezza totale: circa 188mm.
Spessore da chiuso: circa 15mm.
Bilanciatura: -
Peso: circa 128g.
Chiusura: liner lock
Clip: -
Fodero: in pelle
Confezione: -
Note: -3956 -
Citadel - Folding Kukri Bufalo - 206 - coltello artigianale
Destinazione d'uso: sportivo
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7 a tempra selettiva 40/60HRC
Trattamento Lama: -
Manicatura: Corno di Bufalo D'acqua
Lunghezza lama: 115mm.
Spessore lama: 3.5mm.
Lunghezza chiuso: 142mm.
Lunghezza totale: 250mm.
Spessore da chiuso: 23mm.
Bilanciatura: -
Peso: 250g.
Chiusura: Liner Lock
Clip: -
Fodero: -
Confezione: -
Note: -3954 -
Citadel - Folding Kukri Legno - 206L - coltello artigianale
Destinazione d'uso: sportivo
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7 a tempra selettiva 40/60HRC
Trattamento Lama: -
Manicatura: legno
Lunghezza lama: 115mm.
Spessore lama: 3.5mm.
Lunghezza chiuso: 142mm.
Lunghezza totale: 250mm.
Spessore da chiuso: 23mm.
Bilanciatura: -
Peso: 250g.
Chiusura: Liner Lock
Clip: -
Fodero: -
Confezione: astuccio di cordura con chiusura zip e ricamo con logo Citadel
Note: -3961 -
Citadel - Giaponino Bufalo - 208 - coltello artigianale
ATTENZIONE: i dati tecnici del coltello sono approssimativi e variano da coltello a coltello trattandosi di prodotti artigianali.
Destinazione d'uso: collezione/sportivo
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7
Trattamento Lama: -
Manicatura: Corno di Bufalo D'acqua
Lunghezza lama: circa 58mm.
Spessore lama: circa 3mm.
Lunghezza chiuso: circa 87mm.
Lunghezza totale: circa 147mm.
Spessore da chiuso: circa 14mm.
Bilanciatura: -
Peso: circa 104g.
Chiusura: liner lock
Clip: -
Fodero: in cordura
Confezione: -
Note: -3957 -
Citadel - Japanese Aikuchi - Special Salamander - Handmade knife
Type of production: Artisan
Country of production: Cambodia
Steel: carbon DNH7, hand forged, with hardened clay tempered at 60 / 40HRC
Habaki: copper
Tsuka: samekawa (ray skin)
Saya: Lacquered wood and water buffalo horn
Blade length: 122mm. (including habaki)
Total length: 222mm.
Weight: 110g. without sayaNote: Since these are handmade items and differ slightly in finishes from one another, the knife you ordered may not be identical to the one shown in the images.
CI-ASAL -
Citadel - Japanese Aikuchi No.1 Small - 502S - custom knife
These craftsmanships are distinguished by their classical lineage and their functional quality, which blends well with traditional production techniques and materials used. The blades are hardened to a hardness of about 40 HRC, after which they have been hammered by hand, the back and sides are clad with clay and the thread is retreaded to 60 HRC for excellent cutting, penetration and flexibility . The blade is then polished and sharpened by hand on stone and the knife is finished in every single detail.
Blade: high-carbon DNH7 steel with selective clay 40 / 60HRC clay and high degree of mirror polishing.
Hamon: Gunome style
Bo-Hi: absent
Total Length: 23.3cm.
Blade length: 11.8cm.
Blade thickness: 3.5mm.
Balance: on guard
Length Grip: 8.5cm.
Weight: 136g.
Saya: black lacquered wood with buffalo horn finishes
Tsuka-ito: Black cotton on the same (white skin) white
Sageo: absent
Fuchi and Kashira: in buffalo horn
Menuki: bronze
Habakia: Copper
Notes: Sold with silk sheath and cordura carrying case.3951 -
Citadel - Nordic 2003 - 282 - coltello artigianale
Citadel - Nordic '03
Questi coltelli artigianali si distinguono per la loro linea originale, ma funzionale, che ben si accoppia alletradizionali tecniche realizzative ed ai materiali impiegati.
Le lame vengono infatti temprate a carbone fino adavere una durezza di circa 40 HRC dopodichè, dopo essere state martellate a mano, dorso e lati vengono rivestiti di argilla ed il filo è ritemprato a 60 HRC per avere ottime capacità di taglio, penetrazione e flessibilità. Il coltello viene poi lucidato ed affilato a mano su pietra e rifinito in ogni singolo dettaglio.
Lama: Acciaio DNH7 "Bruit de forge" a tempra selettiva 40/60 HRC con dorso lavorato a lima
manicatura: In legno Bois de Rose
Lunghezza lama: 95 mm.
Lunghezza impugnatura: 120 mm.
Spessore della lama: 4 mm.
Lunghezza totale: 210 mm.
Fodero: Cuoio marrone lavorato a mano
Peso: 125 g.
Nota: l'immagine è a puro scopo esemplicativo in quanto ogni coltello, essendo artigianale, risulta essere unico e diverso dal precedente.3922 -
Citadel - Skinner Baltic 3 - 563 - coltello artigianale
Destinazione d'uso: caccia
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7 a tempra selettiva 40/60HRC
Trattamento Lama: -
Manicatura: Corno di Bufalo D'acqua
Lunghezza lama: 103mm.
Spessore lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 228mm.
Spessore da chiuso: -
Bilanciatura: arretrata, a 2cm.
Peso: 208g.
Chiusura: -
Clip: -
Fodero: Cuoio Marrone
Confezione: astuccio di cordura con chiusura zip e ricamo con logo Citadel
Note: -3952 -
Citadel - Tanto Luxe Inciso - 130 - craft knife
These artisanal products stand out for their classic line and their functional quality, which is well matched to the traditional manufacturing techniques and the materials used.
The blades are in fact carbon-hardened to a hardness of around 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire is tempered at 60 HRC to have excellent cutting, penetration and flexibility . The blade is then polished and sharpened by hand on stone and the knife is finished in every single detail.Blade: in DHN7 steel with high carbon content with selective clay / 40 / 60HRC tempering and high degree of polishing.
Hamon: Gunome style
Bo-Hi: absent
Total length: 38.5cm.
Blade length: 23.3cm.
Blade thickness: 6.5mm. / 3mm.
Balancing: Advanced 2.5cm from Tsuba
Handle Length: 9.5cm.
Tanto weight: 372g.
Weight with Saya: 488g.
Saya: black lacquered wood, drowned gold leaves and buffalo horn finishes
Tsuka-ito: beige cotton on the same white (breed leather)
Sageo: absent
Tsuba, Fuchi and Kashira: in burnished and finely engraved metal
Menuki, seppa, shitodome: bronze
Habaki: copper
Notes: The Tanto is sold with a silk sheath and carrying case cordura.Small technical glossary: Hamon: hardening line on the blade * Hi: deep groove in the blade, also called bloodsucker * Saya: sword sheath * Tsuka-Ito or Tsuka-gawa: cotton, silk or leather braid wrapping the handle * Tsuba: guard * Drones: ornament between guard and handle * Kashira: ornament at the end of the handle * Menuki: medallions placed under the cordage of the handle * Habaki: collar that wraps the beginning of the blade * Seppa: seals of the guard * Shitodome: seals to which is tied the Sageo * Sori: curvature of the blade
CI-TA-B -
Citadel - Toucan - 150 - coltello artigianale
Citadel - Toucan
Questi coltelli artigianali si distinguono per la loro linea originale, ma funzionale, che ben si accoppia alletradizionali tecniche realizzative ed ai materiali impiegati.
Le lame vengono infatti temprate a carbone fino adavere una durezza di circa 40 HRC dopodichè, dopo essere state martellate a mano, dorso e lati vengono rivestiti di argilla ed il filo è ritemprato a 60 HRC per avere ottime capacità di taglio, penetrazione e flessibilità. Il coltello viene poi lucidato ed affilato a mano su pietra e rifinito in ogni singolo dettaglio.
Lama: Acciaio DNH7 "Brut de forge" a tempra selettiva 40/60 HRC con dorso lavorato a lima
Manicatura: legno di palissandro
Lunghezza lama: 110 mm.
Spessore della lama: 5 mm.
Lunghezza totale: 230 mm.
Peso: 300 g.
Fodero: marrone, in cuoio, realizzato a mano
Nota: Essendo coltelli artigianali, e differendo leggermente per finiture l'uno dall'altro, il coltello da voi ordinato potrebbe non essere identico a quello rappresentato nelle immagini.3918 -
Citadel - Vermicellus - 330 - coltello artigianale
Citadel - Vermicellus
Questi coltelli artigianali si distinguono per la loro linea originale, ma funzionale, che ben si accoppia alletradizionali tecniche realizzative ed ai materiali impiegati.
Le lame vengono infatti temprate a carbone fino adavere una durezza di circa 40 HRC dopodichè, dopo essere state martellate a mano, dorso e lati vengono rivestiti di argilla ed il filo è ritemprato a 60 HRC per avere ottime capacità di taglio, penetrazione e flessibilità. Il coltello viene poi lucidato ed affilato a mano su pietra e rifinito in ogni singolo dettaglio.
Lama: Acciaio DNH7 "Brut de forge" a tempra selettiva 40/60 HRC
Manicatura: legno di rosa
Lunghezza lama: 120 mm.
Spessore della lama: 5 mm.
Lunghezza totale: 220 mm.
Peso: 160 g.
Fodero: marrone, in cuoio, realizzato a mano
Nota: Essendo coltelli artigianali, e differendo leggermente per finiture l'uno dall'altro, il coltello da voi ordinato potrebbe non essere identico a quello rappresentato nelle immagini.3917