Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and hold of the thread and in innovation for the materials used and for construction techniques.

Intended use: Collection / Sports

Type of production: Midtech
Country of production: Sakai - Japan
Blade: in Hitachi YXR7 steel at 64HRC
Blade treatment: Black DLC mirror
Handle: A7075 Duralumin with Hv400 hardness anodizing
Blade length: 70mm.
Blade thickness: 3.3mm.
Length closed: 104mm.
Total length: 176mm.
Thick when closed: 11.4mm.
Weight: 74g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel of 1mm. with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: -
* Marks on handle: - -
* Box: marketed in silk pouch.
* Scabbard: Leather, belt, original, with a few small marks given by time.
* Manuals, Certificates and Warranties: present.
* Checked and Certified by our in-house laboratory



The HIGO-MH-DLC folder features a 3.5-inch YXR7 blade with DLC coating and Micarta handle. The incredible mirror finish is achieved by heat treating the blade and gradually grinding by hand with wet and dry sandpaper of 400, 600, 800, 1,200 and 2,000. The HIGO-MH-DLC comes with a black leather belt case with a slot to hold the included torx wrench.

Country of manufacture: Japan
Type of manufacture: midtech
Blade: DLT571 steel (Hitachi YXR7 at 64.1HRC with 3micron HPC coating and hardness of Hv1300)
Handle: 2mm stainless steel sus402J2 at 52HRC with micarta handles
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 216mm.
Weight: 139g.
Closure: Liner Lock
Clip: stainless steel
Notes: Serial number 303 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially available

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.


The best industrial knives currently in production are marketed under the Rockstead brand. Created by Katsumi Kitano, who has been making quality knives for more than 20 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in the level of innovation for the materials used and construction techniques.

Country of production: Japan
Type of production: midtech
Blade: Hitachi YXR7 steel at 64.8HRC with 3micron HPC coverage and hardness of Hv1800
Handle: Duralumin A2024 with surface anodizing and hardness of Hv400
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 215mm.
Weight: 130g.
Closure: Frame Lock with SKD11 casement at 61HRC
Clip: made of 402J2 steel at 48HRC
Notes: Serial number 005 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially available

Intended use: tactical/sporting

Type of production: Industrial
Country of manufacture: USA
Blade: Fulltang, 1095 black textured powder coated steel
Handle: Micarta
Blade length: 95mm.
Blade thickness: 3.5mm.
Total length: 197mm.
Balance: advanced
Weight: 200g.
Sheath: leather, for vertical carrying on belt
Packaging: cardboard box with Ontatio Knife Company logos.

Intended Use: Tactical / Military

Production type: Industrial
Country of Production: USA
Blade: hidden tang in 1075 carbon steel
Blade treatment: powder coating
Handle: kraton
Blade length: 178mm.
Blade thickness: 4.5mm.
Total length: 308mm. 
Balancing: advanced
Weight: 286g.
Scabbard: Belt, nylon, for vertical carrying.
Package: Cardboard box with OKC logos
Notes: -

Intended Use: Multirole / Tactical

Production type: Industrial
Country of Production: USA
Blade: hidden tang in 1095 carbon steel
Blade treatment: Phosphated
Handle: Thermoplastic, with steel tang and guard
Blade length: 152mm.
Blade thickness: 4mm.
Total length: 282mm. 
Balance: backward
Weight: 294g.
Scabbard: thermoplastic, with steel inner lock and Cordura back loop.
Package: Cardboard box with OKC logos
Notes: Knife produced and used for many decades by the U.S. naval forces.

Intended use: Tactical / Military

Type of production: Industrial
Country of production: USA
Blade: 1095 carbon steel hidden tang
Blade treatment: epoxy powders
Handle: in kraton
Blade length: 200mm.
Blade thickness: 5mm.
Total length: 330mm.
Balancing: on the guard branch
Weight: 323g.
Sheath: belt, in cordura and leather, vertical carry
Packaging: Cardboard box with OKC logos
Note: -

Designed by Dan Maragni, the Ontario SP53 Bolo Knife features a 25cm bolo-style blade made of 5160 steel with an epoxy powder coating. The Bolo SP53 knife comes complete with a MOLLE compatible black tactical sheath and is made in the USA.

Intended use: Hard Utility / Survival

Type of production: Industrial
Country of production: USA
Blade: full tang in 5160 Carbon Steel
Blade treatment: epoxy powders
Handle: in kraton
Blade length: 257mm.
Blade thickness: 6.4mm.
Total length: 384mm.
Balancing: advanced
Weight: 940g.
Sheath: nylon, M.O.L.L.E.compatible, with rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -

The TAK 2 is a fixed blade knife ideal for hunting, camping, survival and many other outdoor applications. The TAK 2 knife features a high carbon steel blade and a stabilized hardwood handle.
Intended use: Tactical / Military

Type of production: Industrial
Country of production: USA
Blade: 1075 carbon steel hidden tang
Blade treatment: Powder Coat
Handle: in kraton, with steel tang
Blade length: 116mm.
Blade thickness: 4.8mm.
Total length: 250mm.
Balance: 4cm back
Weight: 275 g.
Sheath: in leather
Packaging: Cardboard box with OKC logos
Note:

The SP24 USN-1 survival knife is one of Ontario Knife Company's Spec Plus series models. Designed for military use but practical enough as a survival knife, camping knife or even hunting knife. In addition to the serrations on both sides, there is also a rope cutter on the blade of the knife. As with all Spec Plus, the SP24 USN-1 survival knife is made in the United States.
Intended use: Tactical / Military

Type of production: Industrial
Country of production: USA
Blade: 1075 carbon steel hidden tang
Blade treatment: Powder Coat
Handle: in kraton, with steel tang
Blade length: 127mm.
Blade thickness: 4.8mm.
Total length: 245mm.
Balancing: 3cm back
Weight: 225g.
Sheath: nylon, modular, compatible with M.O.L.L.E.
Packaging: Cardboard box with OKC logos
Note:

Intended use: Hard Utility / Survival

Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: epoxy powders
Handle: in kraton
Blade length: 250mm.
Blade thickness: 6mm.
Total length: 380mm.
Balancing: advanced
Weight: 425g.
Sheath: nylon, M.O.L.L.E.compatible, with rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -

Made from the very famous 499 Pilot's Survival Knife (Air Force Survival Knife), the OKC Journeyman Knife is ideal for outdoor activities. The OKC Journeyman knife features a sturdy 10cm blade with a sawn back, made from 1095 high carbon steel with a black phosphated finish. The Ontario Journeyman Knife comes with a leather sheath and is entirely made in the USA.

Intended use: tactical / sports
Type of production: Industrial
Country of production: USA
Blade: 1095 black texture powder coated steel
Handle: leather discs
Blade length: 10mm.
Blade thickness: 4.5mm.
Total length: 217mm.
Balancing: 2 cm back from the guard branch
Weight: 252g.
Sheath: in leather
Packaging: cardboard box with Ontatio Knife Company logos

Intended use: Tactical / EDC

Type of production: Industrial
Country of production: Taiwan
Blade: in tool steel D2
Blade treatment: Black
Handle: G10
Blade length: 92mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 207mm.
Thick when closed: 11.7mm.
Weight: 85g.
Opening: by thumbstood, by right-handed
Washers: teflon
Closure: liner lock
Clip: in stainless steel, removable
Packaging: Cardboard box with Ontario Knife Company logos
Notes: Design by Bob Dozier

Intended use: Tactical / Military

Type of production: Industrial
Country of production: USA
Blade: full tang in 5160 carbon steel
Blade treatment: powder coating
Handle: micarta
Cutting length: 140mm.
Blade thickness: 6.5mm.
Total length: 480mm.
Balancing: advanced
Weight: 1130g.
Sheath: nylon, M.O.L.L.E compatible, rigid polypropylene insert
Packaging: transparent thermoplastic bag
Note: -

Intended use: Hunting / Hiking

Type of production: Industrial
Country of production: USA
Blade: full tang in 440B stainless steel
Blade treatment: satin finish
Handle: in kraton
Blade length: 110mm.
Blade thickness: 4.7mm.
Total length: 230mm.
Balancing: slightly advanced
Weight: 160g.
Sheath: nylon, belt, vertical port
Packaging: Cardboard box with OKC logos
Note: -

Intended use: Tactical / Military

Type of production: Industrial
Country of production: USA
Blade: full tang in 5160 carbon steel
Blade treatment: powder coating
Handle: micarta
Blade length: 90mm.
Blade thickness: 6.3mm.
Total length: 190mm.
Balancing: set back
Weight: 244g.
Sheath: nylon, belt, with rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -

Intended use: Tactical / Military

Type of production: Industrial
Country of production: USA
Blade: full tang in 5160 carbon steel
Blade treatment: powder coating
Handle: micarta
Blade length: 175mm.
Blade thickness: 6.3mm.
Total length: 305mm.
Balancing: slightly advanced
Weight: 522g.
Sheath: nylon, M.O.L.L.E compatible, rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -

Intended use: Tactical / Military

Type of production: Industrial
Country of production: USA
Blade: full tang in 5160 carbon steel
Blade treatment: powder coating
Handle: micarta
Blade length: 135mm.
Blade thickness: 6.3mm.
Total length: 260mm.
Balancing: slightly set back
Weight: 334g.
Sheath: nylon, M.O.L.L.E compatible, rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: - 

Intended use: Tactical / Military

Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: phosphated
Handle: in kraton
Blade length: 135mm.
Blade thickness: 4.7mm.
Total length: 260mm.
Balancing: slightly advanced
Weight: 184g.
Sheath: nylon, belt, vertical port
Packaging: Cardboard box with OKC logos
Note: -

Intended use: Tactical / Military

Type of production: Industrial
Country of production: USA
Blade: 1095 carbon steel hidden tang
Blade treatment: epoxy powders
Handle: in kraton, with tang and steel guard
Blade length: 200mm.
Blade thickness: 5mm.
Total length: 330mm.
Balancing: on the guard branch
Weight: 368g.
Sheath: belt, in cordura and leather, vertical port
Packaging: Cardboard box with OKC logos
Note: -

Intended use: Hard Utility / Survival

Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: epoxy powders
Handle: in kraton with steel guard
Blade length: 245mm.
Blade thickness: 6.8mm.
Total length: 380mm.
Balancing: advanced
Weight: 620g.
Sheath: nylon, M.O.L.L.E compatible, with rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -

ASEK KNIFE

Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: 1095 carbon steel hidden tang
Blade treatment: Phosphated
Handle: in kraton, with tang and steel guard
Blade length: 127mm.
Blade thickness: 4.8mm.
Total length: 270mm.
Balancing: set back
Weight: 266g.
Sheath: nylon, modular, M.O.L.L.E compatible, with polypropylene interior and special compartment for the ASK Tool
Packaging: Cardboard box with OKC logos
Note: The survival system consists of a knife and an Asek Rescue Tool emergency tool

ASEK RESCUE TOOL

Blades: 420j2B stainless steel, HRC 54-56 hardness
Handle: aluminum
Total length: 170 mm
Notes: also equipped with a screwdriver / prybar and ceramic sharpener

ASEK KNIFE

Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: 1095 carbon steel hidden tang
Blade treatment: Phosphated
Handle: in kraton, with tang and steel guard
Blade length: 127mm.
Blade thickness: 4.8mm.
Total length: 270mm.
Balancing: set back
Weight: 266g.
Sheath: nylon, modular, M.O.L.L.E compatible, with polypropylene interior and special compartment for the ASK Tool
Packaging: Cardboard box with OKC logos
Note: The survival system consists of a knife and an Asek Rescue Tool emergency tool

ASEK RESCUE TOOL

Blades: 420j2B stainless steel, HRC 54-56 hardness
Handle: aluminum
Total length: 170 mm
Notes: also equipped with a screwdriver / prybar and ceramic sharpener

Intended use: Hard Utility / Survival

Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: epoxy powders
Handle: in kraton
Blade length: 255mm.
Blade thickness: 6.5mm.
Total length: 385mm.
Balancing: advanced
Weight: 642g.
Sheath: nylon, M.O.L.L.E compatible, with rigid polypropylene insert
Packaging: Cardboard box with Ontario Knife Company logos
Note: -

Intended use: Tactical / Military

Type of production: Industrial
Country of production: USA
Blade: 1095 carbon steel hidden tang
Blade treatment: Phosphated
Handle: in rubber, with tang and steel guard
Blade length: 200mm.
Blade thickness: 5.2mm.
Total length: 345mm.
Balancing: set back
Weight: 424g.
Sheath: in polypropylene, modular, compatible with M.O.L.L.E., with integrated ceramic sharpener
Packaging: Cardboard box with OKC logos
Note: -

Training tomahawk made of rigid plastic material

- Material: black thermoplastic
- Overall length 325 mm
- Blade length 84 mm (thickness 6.5 mm)
- Weight 142 grams

This knife can still slice paper even after the punishment of striking and cutting dried bamboo.This knife has a beautiful convex surface with extreme sharpness.This is a flagship of the ROCKSTEAD folding knife collection. Both sides of the blade are convex. The blade is in the shape of the traditional Japanese sword. It cuts well and is strong. You can enjoy its strong cutting capabilities for a long time.

Full length: 213.00 mm
Blade length: 93.00 mm
Weight: 155 g
Thickness: 3.70 mm
Material: YXR7
Hardness: HRC65
Blade geometry: Honzukuri
Hard coating: DLC
Knives type: Folder

Intended use: tactical / sport
Type of production: Industrial
Country of Origin: USA
Blade: full tang, steel 1095 black texture powder coated
Handle: Micarta
Blade length: 127mm.
Blade thickness: 5mm.
Overall length: 267mm.
Balance: on guard branch
Weight: 326g.
Sheath: Nylon, with rigid internal
Packaging: cardboard box with Ontatio Knife Company logos

Rockstead - Chu DLT - knife

Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest honor among the artisan knife makers in Japan, proved to be exceptional in cutting capacity, penetration and sealing wire is at the level of innovation for materials and construction techniques.

Blade: Stainless steel with 64HRC Hitachi YXR7 to cover DLT571 3micron
Handle: in green paracord
Blade length: 120mm.
Blade Thickness: 6mm.
Overall length: 2150mm.
Weight: 284g.
Balancing: 1cm back from the lower branch of the guard
Sheath: Leather
Note: Product is out of print

This knife is used exclusively by the United States Marine Corps and has been manufactured by the Ontario Knife Company for many years now.

Intended use: military / collection

Type of production: Industrial
Production Lama: America
Blade: 1095C carbon steel
Blade treatment: Phosphates
Handle: Painted leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 305mm.
Thick when closed: -
Balance: set back, at 1cm.
Weight: 284g.
Closing: -
Clip: -
Sheath: Black Leather
Packaging: transparent plastic bag
Note: -

The Ontario Knife 6150, 499 Air Force Survival Knife, a classic among military blades, is still used today by the US military.

Made in the USA

Blade: 1095 carbon steel covered with epoxy powders
Handle: leather discs
Blade length: 127 mm.
Blade thickness: 4 mm.
Total length: 245 mm.
Weight: 250 g.
Sheath: Cordura and leather

Intended use: Outdoor

Type of production: Industrial
Lama production: USA
Blade: 5160 carbon steel
Blade treatment: Powder Coat
Handle: Micarta
Blade length: 265mm.
Blade thickness: 4.7mm.
Total length: 425mm.
Balancing: -
Weight: 622g.
Sheath: in Nylon with MOLLE attachments.
Packaging: cardboard box with Ontario Knife Company logos
Note:

Ontario Ranger - Shank - Black Canvas Micarta Knife

Intended Use: Tactical / sports
Type of production: Industrial
Production Blade: America
Blade: 1095 steel with black texture powder coated
Handle material: Micarta
Blade length: 150mm.
Blade thickness: 3mm.
Total length: 260mm.
Balance: on the branch guard
Weight: 190g.
Sheath: Nylon
Package: plastic bag