Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Hogue - 4" EX-01 Drop Point G-Mascus - PRIVATE COLLECTION - knife
Knife withdrawn from private collection - 2011 model now discontinued and no longer available designed by Allen Elishewitz - Like new, with no special signs of wear and tear - Original factory sharpening in excellent condition - No original packaging - Checked and certified by our in-house laboratory.
Intended Use: TacticalProduction type: Industrial
Country of manufacture: USA
Blade: stainless steel 154CM at 58/60HRC
Blade Finish: Stonewashed
Handle: 3D machined G-10 G-Mascus
Blade length: 108mm.
Blade thickness: 3.5mm.
Length closed: 127mm.
Total length: 227mm.
Thickness when closed: 16mm
Weight: 150g
Closure: Button Lock with security system
Clip: Stonewashed Stainless Steel
Packaging: -
Notes: Design by Allen Elishewitz - knife withdrawn from private collection - like newHO-EX014-CP -
Mission - MPK10-A2 Plain Edge - Navy Seal Knife - USED - Knife
Knife withdrawn from private collection - Used, but overall in good condition - An iconic, iconic knife from the first decade of the 2000s, tested and selected by the U.S. Navy Seals - The knife already when new presented itself with an average low level of finish and with a rough micropeened blade already very delicate and marked, this knife, used in the field by an Italian soldier in theaters of war, shows signs of cosmetic wear on both blade and sheath that do not affect its functionality in the slightest - Factory sharpening still in excellent condition - Original amphibious scabbard, in very good condition - No box - Checked and certified by our in-house laboratory.
Intended Use: Tactical / MultiroleType of Manufacture: industrial
Blade: A2 steel hardened to 57/58HRC
Country of Production: USA
Handle: made of Hytrel
Blade length: 140mm.
Blade thickness: 6.3mm.
Total length: 267mm.
Weight: 360g.
Sheath: amphibious, made of Hytrel
Packaging: without original packaging
Notes: used knife, withdrawn from private collection, overall in good conditionMI-MPK10-A2 -
Fantoni - Hide Fixed Premium by T. Rumici - 20Pcs. Limited Edition - PRIVATE COLLECTION - knife
Knife collected from a private collection - Never used, never taken out of its box, like new - Rare model produced by Fantoni in 2009 in a limited edition of only 20 pieces based on a design by Tommaso Rumici, one of his most famous and successful knives, still very modern and with an incredibly attractive design - Supplied with box, warranty certificate, sheath and replacement Ebony grips - Checked and certified by our in-house laboratory.
Intended Use: Collection / SportingCountry of manufacture: Italy
Type of production: industrial
Blade: stainless steel CPM-S30V 61-62HRC
Blade finish: satin-finished
Handle: made of micarta or ebony wood, interchangeable as desired (cheeks included in package)
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 170mm.
Balance: set back 1cm. from the lower guard branch
Weight: 68g.
Sheath: Made of kydex, with clip
Notes: Design by T. Rumici - Limited and numbered edition of only 20 pieces - Collected from private collection, like new.Link to the HIDE project page directly on the website of Designer Tommaso Rumici
FA-HIDE-CP20 -
Zero Tolerance - ZT0550 Hinderer Gen1 Folding Knife + Custom Scales - COLLEZIONE PRIVATA - coltello
Knife withdrawn from private collection - First series (Gen1) of the model produced from 2010, born from the collaboration with Rick Hinderer - Discontinued and no longer available - Globally in very good condition with original sharpening - Supplied with custom G10 and original cheek piece, which can be installed as desired - Devoid of original packaging - Checked and certified by our in-house laboratory.
Intended Use: SportingType of production: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S35VN
Blade finish: Stonewashed
Sleeve: Titanium and G-10 Black (with additional custom G10 gauntlet)
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 206mm.
Thickness when closed: 14mm.
Weight: 173g.
Closure: Frame Lock
Clip: Removable, reversible and multi-position, stainless steel
Packaging: -
Notes: Design by Rick Hinderer - Collected from private collection, overall in very good conditionZT-0550-CSCP -
Al-Mar - Vintage Fixed Sere IV 3004 Fighting Knife - PRIVATE COLLECTION - knife
Knife withdrawn from private collection, presumably from the first half of the 1980s - In excellent condition, with no particular scratches or signs of wear, still has the original factory sharpening - Rare version with micarta handle and engraved head " De Oppresso Liber", the famous motto of the American Green Berets - Original leather sheath in excellent condition, accompanied by original sharpening stone that finds its place in the special pocket - Checked and certified by our in-house laboratory.
Intended use: collectionType of manufacture: industrial
Blade: stainless steel AUS 8
Blade finish: satin finish
Country of manufacture: Seki - Japan
Handle: brown micarta
Blade length: 148mm.
Blade thickness: 4mm.
Total length: 265mm.
Balance: on the guard branch
Weight: 238g.
Sheath: black leather, with sharpening stone
Notes: knife from a private collection from the first half of the 1980s, overall in very good conditionAL-3004-CP -
Laguiole Rossignol - Vintage Laguiole Limited Edition Ivory - PRIVATE COLLECTION - Knife
Knife from private collection, presumably early 1980s, in perfect, like new condition with wooden case and numbered certificate of authenticity. Limited edition specimen with serial number #0005 - Checked and certified by our in-house laboratory.
Intended use: collection
Type of production: handcrafted
Country of manufacture: France
Blade: 440A stainless steel
Handle: ivory
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 220mm.
Thickness when closed: 16mm.
Weight: 72g.
Closure: Slip Joint
Packaging: wooden case with numbered certificate of authenticity
Notes: 1980s vintage knife from private collection, in mint conditionLR-AV005-CP -
Spyderco - Endura 4 Flat FRN Gray - PRIVATE COLLECTION - C10FPGY - Knife
Knife withdrawn from private collection - Overall in very good condition, however, the previous owner removed the clip from the knife, a clip no longer present inside the package and therefore not provided - The knife still has the factory sharpening which should be slightly brightened, however - Supplied with original Spyderco cardboard box - Checked and certified by our in-house laboratory.
Intended Use: SportingType of manufacture: industrial
Blade: stainless steel VG-10
Blade finish: satin
Country of manufacture: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 220mm.
Thickness when closed: 15.5mm.
Weight: 94g.
Locking system: Back Lock
Clip: -
Notes: knife withdrawn from private collection, clipless, overall in very good conditionSC10FPGY-CP -
Andrea Pizzadili - Pattada 23cm Sardinian mouflon horn - PRIVATE COLLECTION - handcrafted knife
Handcrafted knife collected from private collection - In like new condition - never used, with factory sharpening, accompanied by craftsman's certificate and velvet fabric case - checked and certified by our in-house laboratory
Intended Use: Regional Italian / CollectionType of production: Artisan
Country of Production: City of Pattada, Sardinia, Italy
Blade: 420 stainless steel
Blade finish: satin-finished
Handle: Sardinian mouflon horn and alpaca
Blade length: 105mm.
Blade thickness: 2.5mm.
Length closed: 125mm.
Total length: 230mm.
Thickness when closed: 17mm.
Weight: 74g.
Closing mechanism: -
Clip: -
Sheath: -
Packaging: velvet fabric sheath and certificate handcrafted production signed by Andrea Pizzadili
Notes: knife withdrawn from private collection, mint condition, like newAP-PATMU-CP -
Randall Knives - Model 14 Attack - '80s Vintage - PRIVATE COLLECTION - knife
Knife withdrawn from private collection, dating back to the late 1980s, overall in very good condition - Never used, still has factory thread - Checked, certified by our in-house lab.
Intended use: Tactical / CollectionType of production: handcrafted
Country of manufacture: USA
Blade: O1 carbon steel
Blade finish: satin finish
Handle: micarta and brass
Blade length: 190mm.
Blade thickness: 5.5mm.
Total length: 307mm.
Balance: on the guard branch
Weight: 414g.
Sheath: Leather
Notes: knife withdrawn from private collection dating back to the late 1980s, overall in very good conditionRA-14A-CP -
Lionsteel - SR-1A BS - Black Ergal - PRIVATE COLLECTION - knife
From a private collection - 2011 model currently discontinued and no longer available - Winner of the 2010 Blade Show Award as the most innovative knife of the year - Overall in very good condition - Blade has a couple of small, shallow scratches and a speck of oxidation, handle has a small abrasion at the front - Free of box and accessories - Professionally regrind, inspected and guaranteed by our in-house workshop.
Intended Use: SportingProduction type: Industrial
Country of Production: Italy
Blade: D2 steel at 59HRC
Surface finish: Satin finish
Handle: Monoblock, machined from solid, anodized Ergal 7075
Blade length: 95mm.
Blade thickness: 4.5mm.
Total length: 210mm.
Thickness when closed: 9mm.
Weight: 155g.
Closure: Frame Lock, with additional Rotoblock security system
Clip: removable and reversible, stainless steel, deep pocket type, with glass breakthrough pin
Packaging: -
Notes: Winner of Blade Show Award 2010 as most innovative knife of the year - knife collected from private collection globally in excellent conditionLS-SR1ABS-CP -
Randall Knives - Model 11 Alaskan Skinner Stag Horn - PRIVATE COLLECTION - knife
Knife withdrawn from private collection presumably dating back to the first half of the 1980s - overall in good condition - knife still has factory sharpening, but now ineffective - has a couple of small scratches on the blade and a few small marks on the guard - comes with Randall handcrafted leather sheath in excellent condition - Checked and certified by our in-house lab.
Randall's Model 11 was designed in 1952 by Tommy Thompson, noted Alaskan guide. An otima blade for skinning big game, it features a serrated top of the blade to facilitate thumb placement and prevent thumb slippage.
Intended use: hunting/collectingType of production: handcrafted
Country of manufacture: USA
Blade: O-1 carbon steel
Blade finish: satin-finished
Handle: deer antler, with brass guard
Blade length: 855mm.
Blade thickness: 4mm.
Total length: 195mm.
Balance: set back, at 2cm.
Weight: 165g.
Sheath: Leather
Notes: knife withdrawn from private collection, overall in good conditionRK-11ASH-CP -
Buck - 124 Frontiersman Pakkawood 1984 - PRIVATE COLLECTION - knife
The Buck 124 was originally designed in 1966 as a dive combat knife called the Nemo. The model then went into production in 1967 and was offered with either a dive sheath (NEMO) or a leather sheath (FRONTIERSMAN). The knife was the same and has remained so to this day.
In the 1960s about 300 examples were produced and they had black phenolic handles with white Teflon spacers. Then in the 1970s it had a fluctuating production, with very poor sales numbers, until in '73 it was offered with a "Buckarta" (Micarta) handle and began to find favor with the public, with over 10000 examples sold until the early 1980s. Until 1983 model production remained high, and in 1984 a version of the FRONTIERSMAN with a Pakkawood handle was introduced; the 1984 version did not have the patent logos engraved, the 1985 version had the patent engravings, and from 1986 the knife began to have the production date engraved on the blade.
Therefore, our proposed model is from 1984.
Knife withdrawn from private collection - Classic Buck model dating from 1984, first series with wooden handle - Overall in very good condition, with no particular noticeable marks, with a few small scratches on aluminum guard and pommel - Scabbard in excellent condition - Original factory sharpening, but underperforming - Lacking box and certificates - Checked and certified by our in-house laboratory.
Intended Use: Hunting / Utility / Multirole / CollectionType of production: Industrial
Country of manufacture: USA
Blade: full tang, 425M stainless steel
Blade finish: satin-finished
Handle: Pakkawood
Blade length: 159mm.
Blade thickness: 4.5mm.
Total length: 300mm.
Balance: backward
Weight: 377g.
Sheath: black leather
Packaging: absent
Notes: knife withdrawn from private collection, 1984 specimen, overall in very good conditionBU-124PW-CP -
Buck - Buckmaster 184 - 1984 First Production - PRIVATE COLLECTION - vintage knife
Knife withdrawn from private collection, dates from the very first production in 1984 (in fact, it does not indicate the patent engravings, affixed in 1985 and does not indicate the production date, affixed only from 1986). Globally in good condition, it has marks on the blade and handle due to the normal passage of time and the very aggressive scabbard which, containing a spring-loaded metal foil, irreparably scratches the blade both in insertion and extraction - It still has the factory sharpening and comes with a compass in the tang and two harpoons already engaged on the guard branch; lacking instead the box and additional accessories - Checked and certified by our in-house laboratory.
Intended Use: Sporting / CollectionType of production: Industrial
Country of manufacture: USA
Blade: knife made entirely of 425M stainless steel
Blade finish: satin-finished
Handle: hollow, stainless steel, with rear screw cap
Blade length: 185mm.
Blade thickness: 7.5mm.
Total length: 315mm.
Balance: set back from the guard branch
Weight: 675g.
Scabbard: black ABS
Notes: The feature, patented, is the presence of two removable screw-on harpoons/hooks. The function of these is simple anchorage. In fact, this knife can be used as a throwing hook by attaching a rope to the ring on the pommel. The manufacturer guarantees a harpoon hold of up to 600 pounds. The Navy Seals, specifically, had requested a knife that could be used underwater in order to anchor the vehicles to an underwater attachment point, and that is the reason for the total steel construction.CP-BUBM1984 -
Zero Tolerance - Hinderer 566 with 3 handles - ZT0566CF - PRIVATE COLLECTION - knife
Discontinued and no longer available model designed by Hinderer - Knife withdrawn from private collection, globally in excellent condition, with factory sharpening and original box - Originally with Carbon Fiber grip (included), accompanied by 2 additional aftermarket G10 grips and additional bronze-colored anodized titanium hardware - All original Zero Tolerance hardware is also included in the package - Checked and certified by our in-house laboratory.
Intended Use: Sporting/Tactical
Type of production: Industrial
Country of Production: USA
Blade: Elmax stainless steel
Blade Finish: Stonewashed
Handle: Stainless Steel and (originally) Carbon Fiber + 2 additional G10 grips
Blade Length: 82mm.
Blade thickness: 3mm.
Length closed: 113mm.
Total length: 196mm.
Thickness when closed: 12mm.
Weight: 145g.
Closure: Frame Lock
Clip: stainless steel, removable and multi-position (only on the carbon fiber gauntlet)
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - SpeedSafe opening system - Knife withdrawn from private collection equipped with 2 additional aftermarket G10 cheek pieces and custom titanium hardware, with bronze-colored anodizingCP-ZT566CF -
Spyderco - Native 5 Salt - FNR Yellow - C41PYL5 - PRIVATE COLLECTION - Knife
Knife withdrawn from private collection. Overall in very good condition, including thread. Complete with original Spyderco cardboard box. Checked and certified by our in-house laboratory Coltelleria Collini.
The very popular Native 5 Lightweight combined with the extraordinary corrosion resistance of the nitrogen-based LC200N steel.
Intended use: Sporting / Collection
Production Type: Industrial
Blade Production: USA
Blade: Nitrogen-based LC200N stainless steel
Blade Treatment: -
Handle: FRN Lightweight
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 102mm.
Total length: 175mm.
Thickness when closed: 15.5mm.
Balance: -
Weight: 70g.
Closure: Back Lock
Clip: Stainless steel
Packaging: Cardboard box with Spyderco logos
Notes: -CP-C41PYL5 -
Gerber - 425 Hunting Knife - Vintage 1972 - PRIVATE COLLECTION - knife
Vintage knife produced in Portland in 1972 characterized by an extremely penetrating full flat type of sharpening, designed specifically for hunting use - Knife withdrawn from private collection - Overall in very good condition - Never used, a few small marks on the leather sheath, due to the passage of time - Free of packaging - Checked and certified by our internal laboratory Coltelleria Collini
Intended use: Collection / Vintage / Hunting
Type of production: industrial
Country of manufacture: USA
Blade: 440C stainless steel
Blade finish: mirror polish
Handle: stainless steel guard and pommel, brass spacers, macassar ebony handle
Blade length: 115mm.
Blade thickness: 3mm.
Total length: 225mm.
Balance: backward
Weight: 191g.
Sheath: leather
Packaging: -
Notes: Vintage knife from 1972 - Withdrawn from private collection globally in very good condition - UnpackedGE-425HKV -
Puma - Defender LM - 154CM Limited Edition - 14 6481 - PRIVATE COLLECTION - knife
Iconic knife produced by Puma and dating back to the late 1980s, characterized by a then very modern line and a very advanced steel for the time (154CM). Knife withdrawn from private collection - Overall in very good condition - Never used, never sharpened, still with factory sharpening - A few small marks on the right side handle, in concomitance with the sheath that goes to hook the knife through a pin that tends to irreparably rub the handle itself - Supplied with original wooden case and leather sheath - Checked and certified by our internal laboratory Coltelleria Collini
Intended use: Collection / Vintage / Tactical
Type of production: handcrafted
Country of manufacture: Germany
Blade: stainless steel 154CM
Blade finish: satin-finished
Handle: Integral, stainless steel and Micarta
Blade length: 160mm.
Blade thickness: 5.5mm.
Total length: 290mm.
Balance: backward
Weight: 285g.
Sheath: leather
Packaging: wooden case
Notes: 1980s Vintage knife - Limited edition of only 500 pieces, numbered on the blade, specimen 170 of 550 - Knife withdrawn from private collection globally in excellent conditionPU-DEFLM-CP -
Viper - Drop Knife - Partridge Feather by Silvestrelli - 5700INPN - PRIVATE COLLECTION - knife
Knife withdrawn from private collection - Overall in very good condition, no original box (will be delivered with an alternative Viper box, but it will not be its own) - Original sharpening, never used - First series, still in Sandvik steel (current production is in 1.4416 steel) - Checked and certified by our in-house laboratory.
Intended use: Collection/Sportsman/GentlemanType of production: industrial
Country of production: Italy
Blade: Sandvik 12C27 stainless steel
Blade treatment: satin finish
Handle: made of Resin, with real Partridge feathers inside and stainless steel liners
Blade length: 49mm.
Blade thickness: 3mm.
Length when closed: 75mm.
Thickness when closed: 12mm.
Total length: 125mm.
Weight: 68g.
Closure: Liner Lock
Clip: absent
Scabbard: absent
Notes: Drowned in resin, two elegant Partridge feathers find their place - design by Fabrizio "Sylvester" Silvestrelli - Knife withdrawn from private collectionV5700INPN -
Gerber - BMF - Basic Multi Function 8 teeth - survival knife - vintage - PRIVATE COLLECTION - tactical knife
Famous knife produced by Gerber and dating from around the 1980s, discontinued in 1999. Version with 8 teeth serration on the back. Knife taken from a private collection: very good condition. Without cardboard box. Checked by our in-house laboratory Coltelleria Collini
Intended use: Military
Type of production: industrial
Blade: AUS-8 stainless steel
Blade treatment: micro-peening
Country of manufacture: USA
Handle: Hypalon
Blade length: 200mm. (edge length 175mm.)
Blade thickness: 6mm.
Total length: 342mm.
Balance: on the guard
Weight: 433g. (775g. including scabbard)
Notes: Serial number 006282 - In the pocket on the scabbard is the original compass - NO BOX
Scabbard: ABS and CorduraTranslated with www.DeepL.com/Translator (free version)
GE-BMF-CP-1 -
Buck Custom - Stag Horn Hunting Fixed Blade - PRIVATE COLLECTION - knife
Collected from a private collection, this Custom model of the American Buck made prior to 1986 is numbered on the blade with serial number 0023 - Never used and never resharpened, overall in excellent condition - Devoid of packaging and certificates, supplied with its own brown leather sheath - Distinguished by its full tang construction, prominent brass guard and beautiful stag handle with finger grooves - Checked and certified by our in-house laboratory Coltelleria Collini.
Intended Use: Collection / HuntingType of production: handcrafted
Country of production: USA
Blade: full tang in 420HC stainless steel with concave rounding
Blade finish: mirror polish
Handle: brass guard and deer handle with finger grooves
Blade length: 134mm.
Blade thickness: 5mm.
Total length: 258mm.
Weight: 325g.
Sheath: leather
Packaging: -
Notes: Pre-1986 specimen withdrawn from private collection - Custom series, numbered version on blade, specimen number 0023 - Never used, never resharpened, in excellent conditionBU-CUSHFG -
Timberline - Aviator Pilot Survival Knife - Tanto Chisel Blade - TM94021 - PRIVATE COLLECTION - knife
Knife from a private collection - Very rare and highly sought after discontinued model dating back to 2000 - Peculiar tanto blade with chisel sharpening - This is a scaled down version of Timberline's Specwar model made in collaboration with Emerson - Like new, never used, perfect in every detail, with warranty and immaculate box - Checked and certified by our in-house laboratory.
Intended Use: Tactical / CollectionType of manufacture: Industrial
Country of Production: USA
Blade: 440C stainless steel with chisel sharpening
Blade finish: matte microbead blasting
Handle: Nylon and Fiberglass
Blade length: 95mm.
Blade thickness: 2.5mm.
Total length: 220mm.
Weight: 105g.
Sheath: Kydex
Notes: 2000 knife from a private collection - Like newTM94021 -
Buck - Model 500 - 1987 Canadian Loon - Limited Edition - PRIVATE COLLECTION - knife
Withdrawn from a private collection, this American Buck Model 500 made in 1987 turns out to be exclusive because of the gold leaf engraving on the blade commemorating the Loon, the iconic swimming bird of Ontario, Canada, and the limited edition of only 250 pieces - Like-new condition, never used, with original Buck warranties and manuals and accompanying 1987 Canadian $1 coin, also dedicated to the Loon - Checked and certified by our in-house Coltelleria Collini laboratory.
Intended Use: CollectionType of production: Industrial
Blade Production: USA
Blade: Engraved 420HC stainless steel
Blade Finish: Polishing
Handle: Walnut wood and Alpacca (Nickel and Silver alloy)
Blade Length: 78mm.
Blade thickness: 2.5mm.
Length closed: 111mm.
Total length: 187mm.
Thickness when closed: 18mm.
Weight: 135g.
Closure: Back Lock
Package: wooden box, original care and maintenance manuals and warranty certificate of the time
Notes: Limited edition made in only 250 numbered examples on the blade (example 169 of 250) - 1987 specimen withdrawn from private collection, in like-new condition.BU-500CL -
Meyerco - The Strut'N'Cut First Production Run by Blackie Collins - PRIVATE COLLECTION - knife
Knife from private collection - Like new, never used, with original box, manuals and warranty certificates in excellent condition - Made in 1997 - "First Production Run" edition - All in mint condition. Checked and certified by our in-house laboratory.
Intended Use: Collector/Sportsman
Type of production: Industrial
Country of Production: USA
Blade: 440 stainless steel at 60HRC
Blade finish: microbead blasting
Handle: Nylon and Glass Fiber
Blade Length: 77mm.
Blade thickness: 2.5mm.
Total length: 195mm.
Weight: 81g.
Closure: Strut'N'Cut (modified back lock) or Slipjoint
Clip: removable and reversible, made of Nylon and Glass Fiber
Packaging: cardboard box with Meyerco logos
Notes: Like-new knife from private collection, dating from 1997 "First Production Run" edition, winner of Most Innovative American Knife of the Year at the Blade Show in AltlantaTrivia:
In 1996 Blackie Collins was inducted into the Cutlery Hall of Fame. - The Strut'N'Cut knife is inspired by the soft suspension of Blackie Collins' Ducati motorcycle - In 1996 he partnered with Bill Meyer to create the Meyerco knife company. The two were immediate pioneers in the knife world, being the first company to launch an assisted-opening knife. Today Meyerco is credited with the invention of the spring-loaded knife. - Blackie Collins holds over 60 patents for knife mechanisms and many design patents for cutlery products. He was a cutlery legend and will be greatly missed.MCSTRH -
Cold Steel - Gunsite II - VG-1 Half Serrated - Made in Japan - PRIVATE COLLECTION - 29GLTH - knife
Knife from private collection - Like new, never used, with original box in excellent condition - Mid 90's production still made in Japan, with VG-1 steel - All in mint condition. Checked and certified by our in-house laboratory.
Intended Use: Collector/SportsmanType of production: Industrial
Country of Production: Japan
Blade: Stainless steel VG-1
Blade Finish: Satin
Handle: Zytel
Blade length: 104mm.
Blade thickness: 3mm.
Total length: 233mm.
Weight: 105g.
Closure: Back-Lock
Clip: Removable, painted stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: Like-new knife from a private collection, dating from the mid-1990s; made in Japan from VG-1 steelC29GLTH -
Ontario Knife Company - Hiking Knife - 8187 - bushcraft knife
Intended Use: Utility / Bushcrat / Hunting
Production type: Industrial
Country of Production: USA
Blade: 420HC stainless steel full tang
Blade treatment: Satin finish
Handle: Micarta Mossy Oak
Blade length: 86mm.
Blade thickness: 3.5mm.
Total length: 210mm.
Balance: on the guard branch
Weight: 148g.
Scabbard: Belt, leather, for vertical carrying.
Packaging: Cardboard box with OKC logos
Notes: -ON8187 -
ExtremaRatio - Harpoon Miles knife - PRIVATE COLLECTION - knife
Rare original model Extrema Ratio Harpoon Miles no longer in production since 2009 - Knife in excellent condition with original box and double handle. Checked, sharpened and certified by our internal laboratory - Collini Cutlery.
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama: Italy
Blade: N690Co stainless steel
Blade treatment: Miles
Handle: double Forprene handle
Blade length: 200mm.
Blade thickness: 6.3mm.
Total length: 340mm.
Weight: 314g.
Sheath: ballistic rubber
Packaging: Cardboard box with Extrema Ratio logos
Note: -ER-HAR-M-AP -
Randall Knives - Model Triathlete skeleton Boot knife - PRIVATE COLLECTION - collection knife
Knife withdrawn from a private collection. Condition like new, production dating back to between 1996 and 2005, supplied with Randall artisan leather sheath. Checked and certified by our internal laboratory.
Intended use: hunting / collection
Type of production: artisanal
Production Lama: america
Blade: 440A stainless steel
Blade treatment: -
Handle: -
Blade length: 70mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 165mm.
Balance: set back, at 2cm.
Weight: 89g.
Closure: -
Clip: -
Sheath: Leather
Note:Each Randall model has been thoroughly tested in the field and has been shown to be properly modeled and designed for its particular use. Randall knives are 100% handmade and no two are exactly alike. The demand is so great for all models that it typically takes a few years to get the model ordered directly from Randall.
"Bo" Randall passed away on December 25, 1989 at his home. Bo and his son Gary have run the business side by side for over twenty five years. Gary continues the tradition of handcrafted knives that carry the Randall Made brand along with his children, Jason and Michael.
AP-TRI-SK-RK -
Spyderco - Co-Pilot C09S knife - GIN-1 steel - PRIVATE COLLECTION - knife
Knife withdrawn from private collection - Rare model and out of production for many years, dating back to 1995 with blade made of Japanese GIN-1 steel - Overall in excellent condition. Complete with original box - Checked and certified by our in-house Coltelleria Collini laboratory.
Intended use: Sports / Collection
Type of production: Industrial
Production Lama: Japan
Blade: Gin-1 stainless steel
Blade treatment: -
Handle: steel
Blade length: 50mm.
Blade thickness: 2.5mm.
Closed length: 77mm.
Total length: 126mm.
Thick when closed: 6mm
Balancing: -
Weight: 71g.
Closure: Back Lock
Clip: in stainless steel
Sheath: -
Packaging: cardboard box
Note:SP-C09S-AP -
Klotzli - Sailor C Knife Walker design - Titanium - ATS-34 - collection knife
Knife withdrawn from a private collection, in like new condition with original box and certificate - Model dating back to the late 90s "made by Klotzli from the famous American designer Michael Walker. Knife that combines two qualities that are difficult to match, especially in those years; lightness and strength. Elegant gentleness, easy to open and close with one hand thanks to the Liner-Lock system invented by Walker himself
Checked and certified by our internal laboratory Coltelleria Collini.
Intended use: sports / collection
Type of production: industrial
Country of production: Switzerland
Blade: ATS-34 stainless steel
Blade finish: Satin finish
Handle: Titanium
Blade length: 70mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 170mm.
Weight: 74g.
Closure: LinerLock
Clip: in stainless steel, removable
Notes: Design by Michael WalkerAP-KLO-S-W -
Spyderco - Viele - C42S - 1997 Made in Japan from PRIVATE COLLECTION - knife
Knife taken from private collection - Rare Spyderco model produced in December 1997 - Absolutely like new, with original box, never taken out of the box and never used - Checked and certified by our internal laboratory.
Intended Use: Collection/SportingProduction Type: Industrial
Country of Production: Japan
Blade: AUS-8 Stainless Steel
Handle: Micarta and Steel
Blade Length: 82mm.
Blade Thickness: 3mm.
Length closed: 114mm.
Total length: 196m.
Weight: 98g.
Closure: Liner Lock
Clip: Stainless steel
Package: original box with Spydero logos
Notes: knife made in 12/97, new, never used, with original box.SP-C42S-97 -
Gerber - BMF - Basic Multi Function - survival knife - vintage - PRIVATE COLLECTION - tactical knife
Famous Gerber knife dating back to the 80s and discontinued in 1999 - Knife withdrawn from a private collection in like new condition - without cardboard box. Checked, sharpened and certified by our in-house Coltelleria Collini laboratory
Intended use: Military
Type of production: industrial
Blade: AUS-8 stainless steel
Blade treatment: Hypalon
Production Lama: USA
Handle: Hypalon
Blade length: 220mm.
Blade thickness: 6mm.
Total length: 372mm.
Balancing: on the guard
Weight: 465g.
Notes: serial number 045552
Sheath: in ABS and corduraGE-BMF-CP -
Buck - Simonich Raven Legacy Knife 0895BKS - 2008 - PRIVATE COLLECTION - knife
Knife withdrawn from a private collection. Produced in 2008, it was born from the collaboration between Buck and Simonich Knives. The result is a sturdy, yet handy full tang tactical knife.
Overall in excellent condition - Checked and certified by our in-house Coltelleria Collini laboratory, it comes complete with original box.Intended use: Sports / Collection
Type of production: Industrial
Production Lama: USA
Blade: Bos-hardened CPM S30V stainless steel
Handle: G10
Blade length: 125mm.
Blade thickness: 4mm.
Total length: 255mm.
Balancing: set back from the guard branch at about 40mm.
Weight: 230g. (317g. Including scabbard)
Sheath: in black Nylon
Packaging: Official cardboard box with Buck logos0895BKS-B-CP -
Randall Knives - Model 11 Alaskan Skinner Fixed Blade knife - PRIVATE COLLECTION
Knife withdrawn from a private collection. Condition like new, production dating back to 2005 supplied with Randall artisan leather sheath. Checked and certified by our internal laboratory.
Randall's Model 11 features a serrated top blade for thumb placement. From a leather handle of about 11 cm equipped with a duralumin bottom. The drop-point blade was designed in 1952 by Tommy Thompson, a well-known Alaska guide. Excellent blade for skinning large game.
Intended use: hunting / collectionType of production: artisanal
Production Lama: america
Blade: stainless steel
Blade treatment: -
Handle: leather and brass discs
Blade length: 105mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 225mm.
Balance: set back, at 2cm.
Weight: 163g.
Closure: -
Clip: -
Sheath: Leather
Note:AP-M11-L -
Spyderco - UK Penknife - G10 Orange - C94GPOR - PRIVATE COLLECTION - knife
Knife taken from private collection. Out of production (marketed from 2008 to 2010), like new, supplied with original Spyderco box. Checked and certified by our internal laboratory.
Intended use: sporting
Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S30V
Blade treatment: Satin finish
Handle: G-10
Blade Length: 76mm.
Blade thickness: 3mm.
Length closed: 103mm.
Total length: 178mm.
Thickness when closed: 15mm.
Weight: 70g.
Closure: Slipjoint
Clip: removable, stainless steel
Package: cardboard box with Spyderco logos
Notes: discontinued knife (produced from 2008 to 2010) now out of production - like new, taken from private collectionC94GPOR -
Cold Steel - Facon Knife - 88CLR1 - PRIVATE COLLECTION - knife
From a private collection, this is a model no longer in production that reproduces the Argentine national knife: a blade with a simple shape that is ideal for almost everything from hunting, repair of harnesses and saddles, cooking and eating meals.
In very good condition, it shows some signs of light oxidation on the blade. Checked and certified by our internal laboratory Coltelleria Collini.
Intended use: hunting, cooking
Type of production: industrial
Blade: carbon steel 1090
Country of production: India
Handle: Malaysian Sai Wood
Blade length: 300mm.
Blade thickness: 5mm.
Total length: 447mm.
Balance: forward, 4cm. from the handle
Weight: 542g. (709G. scabbard included).
Scabbard: leather, with metal trim
Notes: -AP-CS88CLR1 -
Master of Defense - Tempest knife SW by Michael Janich Design - PRIVATE COLLECTION - folding knife
Knife withdrawn from a private collection - Rare model produced by the Master of Defense around 2001 - Excellent condition. Never resharpened - Without original box - Checked and certified by our internal laboratory Coltelleria Collini.
Tactical / EDC knife manufactured in the late 1990s and designed by martial arts expert Michael Janich,
Master of Defense, an eclectic American brand no longer in business and later taken over by Blackhawk! Blades, produced various tactical and military type folding and fixed knives, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.
The only copy at our disposal, without box, very rare and out of production for many years.
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama: USA
Blade: 154CM stainless steel
Handle: Aviation aluminum with Kraton anti-slip inserts
Blade length: 86mm.
Blade thickness: 3.5mm.
Closed length: 112mm
Total length: 200mm.
Thick when closed: 13mm
Weight: 120g.
Closure: Liner Lock
Clip: removable, in stainless steel
Packaging:MOD-TEMSW-CP -
Allen Elishewitz - Gordian Knot Custom Flipper - Bronze and Carbon Fiber - PRIVATE COLLECTION - handmade knife
Knife collected from private collection - 2014 model entirely handmade by Allen Elishewitz - Like new, original sharpening - Supplied with nylon pouch with velcro - Checked and certified by our internal laboratory Coltelleria Collini.
Intended use: CollectionKind of production: Handmade
Country of production: USA
Blade: handcrafted and beveled, in CTS-C75P stainless steel (Latrobe BG-42)
Blade treatment: handmade satin finish with Allen Elishewitz golden punch
Handle: titanium liners "crushed ice" with carbon fiber and copper grips with handmade bronze bolsters
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: 128mm.
Total lenght: 223mm.
Thickness when closed: 16mm.
Weight: 199g.
Closure: Liner Lock
Clip: Removable, inegral carbon fiber
Notes: Entirely handcrafted by Allen Elishewitz - 2014 model, like new - from private collector - Supplied with nylon velcro pouch.AE-GKCF -
Spyderco - LionSpy Folding Pocket Knife - PERSONAL COLLECTION - C157GTIP - collection knife
Withdrawn from a private collection and out of production for years - with original box and certificates - in like new condition - Checked and certified by our in-house laboratory.
Intended use: Sports / Collection
Type of production: Semi-Industrial
Production Lama: Italy
Blade: Elmax 60 / 61HRC steel
Blade treatment: -
Handle: Titanium and G10
Blade length: 90mm.
Blade thickness: 4.5mm.
Total length: 207mm.
Thick when closed: 9mm.
Balancing: -
Weight: 168g.
Closure: Frame Lock with Rotoblock safety system
Clip: removable and reversible, in stainless steel
Sheath: -
Packaging: with Spyderco logo
Note:more information: https://www.spyderco.com/catalog/details.php?product=908
AP-C157GTIP -
Al-Mar - Hunting knife - PRIVATE COLLECTION - knife
Rare knife produced by the Japanese Al-Mar around the 90s. Knife withdrawn from a private collection in like new condition - New knife with sheath and original box - Checked and certified by our in-house Coltelleria Collini laboratory.
Intended use: sports / collection
Type of production: industrial
Blade: AUS 8 stainless steel
Blade treatment: -
Lama production: Japan
Handle: micarta
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 195mm.
Weight: 117g.
Closing: -
Clip: -
Sheath: in leather
Notes: with original boxam-cp1 -
Ontario Knife Company - Old Hickory Butcher Knife - 7113 - knife
Ontario Knife Company - Old Hickory Butcher Knife - 7113 - knife
Known for their robust longevity in countless practical applications, Ontario's famous Old Hickory knives have been a go-to for cooking and outdoor enthusiasts for over 95 years.Intended use: Hiking / Camp / Meat / Barbecue
Type of production: Industrial
Country of production: USA
Blade: carbon steel 1095 57-59 HRC
Blade treatment: satin finish
Handle: wood
Blade length: 360mm.
Blade thickness: 2.5mm.
Total length: 500mm.
Weight: 412g.
Sheath: without sheath
Packaging: without packaging
Notes: To make the knife sharper, through our internal laboratory, we further sharpen each blade before shipping.CARE AND MAINTENANCE: This product uses a NON stainless steel with a high carbon content - it is therefore recommended to wash it under running water and dry it immediately manually with a clean cotton cloth or absorbent paper. To avoid the formation of rust and oxidation it is also highly recommended, after having dried it well, to protect the blade with a lubricant (eg grease, paraffin, lanolin, vaseline) that creates a protective barrier between the steel and the atmosphere.
ON7113 -
Ontario Knife Company - Hunting Knife with leather sheath - 7026 - knife
Known for their robust longevity in countless practical applications, Ontario's famous Old Hickory knives have been a go-to for cooking and outdoor enthusiasts for over 95 years. In line with the Old Hickory design, this hunting knife features a 1095 carbon steel blade and wooden handle, making it perfect for hunting and outdoor use. As with all Old Hickory models, this knife also features a wooden handle with brass rivets. Both the fillet knife and the leather sheath are made in the USA.
Intended use: Fishing / Hunting
Type of production: industrial
Country of production: USA
Blade: carbon steel 1095 57-59 HRC
Blade treatment: satin finish
Handle: wood
Blade length: 140mm.
Blade thickness: 2mm.
Total length: 260mm.
Sheath: in leather
Packaging: Ontario official box
Note: To make the knife sharper, through our in-house laboratory, we further sharpen each blade before shipping.CARE AND MAINTENANCE: it is recommended to wash it under running water and dry it immediately manually with a clean cotton cloth or absorbent paper.
ON7026 -
Ontario Knife Company - Fish and Small Game Knife with leather sheath - 7024 - knife
Known for their rugged longevity in countless practical applications, Ontario's famous Old Hickory knives have been a go-to for cooking and outdoor enthusiasts for over 95 years. This model, thanks to its small size and ease of use, is ideal for processing fish and small game animals. It features an 8.5cm stainless steel blade with a satin finish. As with all Old Hickory models, this knife also features a wooden handle with brass rivets. Both the fillet knife and the leather sheath are made in the USA.
Intended use: Fishing / Hunting
Type of production: Industrial
Country of production: USA
Blade: carbon steel 1095 57-59 HRC
Blade treatment: satin finish
Handle: wood
Blade length: 100mm.
Blade thickness: 2mm.
Total length: 220mm.
Sheath: in leather
Packaging: Ontario official box
Notes: To make the knife sharper, through our internal laboratory, we further sharpen each blade before shipping.CARE AND MAINTENANCE: it is recommended to wash it under running water and immediately dry it manually with a clean cotton cloth or absorbent paper.
ON7024 -
Chris Reeve - Large Sebenza 21 knife - 2010 - PRIVATE COLLECTION - knife
* Type: Previously purchased and used
* Condition: In like new condition - manufactured in 2010
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: No
* Marks on handle: No
* Packaging: Yes
* Sheath: /
* Manuals, Certificates and Warranties: Yes
* Checked and Certified by our internal laboratoryIntended use: collection/sports
Production type: Mid-Tech
Country of production: USA
Blade: CPM-S30VN 58/59HRC stainless steel
Handle: Micro-shot peened titanium
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 210mm.
Closed thickness: 17mm.
Weight: 134g.
Closure: Frame Lock
Clip: removable, titanium
Packaging: white cardboard box with Chris Reeve logos and warranty certificatesCR-LS21-CP -
Rockstead - Shin knife - ZDP189 in SanMai - PRIVATE COLLECTION - knife
Retired from rivata collection - Rare Rockstead model produced in 2009 in SANMAI ZDP189 and ATS34 steel - the temper of this piece has reached a rare hardness of 67.4 hrc - Knife in like new condition.
Checked and certified by our internal laboratory - Collini Cutlery.
The best industrial knives currently in production are currently marketed under the Rockstead brand, of Ishida Co. of Sakai, Japan.
Created by Katsumi Kitano, who has been producing quality knives for over 20 years so as to have been awarded the highest recognition among artisan cutlers in Japan, they prove to be exceptional both in cutting capacity, penetration and edge retention and in terms of innovation for materials used and for the construction techniques.
Blade: SanMai ZDP189 and ATS-34 stainless steel at 67.4 HRC
Handle: Same (real stingray leather) and aircraft aluminum with black alumite treatment at Hv400
Blade length: 95 mm.
Blade thickness: 4 mm.
Total length: 210 mm.
Weight: 145 g.
Closure: Liner Lock in 402J2 steel at 52HRC
Clip: 402J2 to 52HRC steel
Notes: Accompanied by a guarantee certificate with technical specifications.RO-S-ZDP-CP -
Deroma - Pattada knife craft knife in ram's horn - 27cm - craft knife
Intended use: Regional
Type of production: Artisan
Lama production: Italy
Blade: 12c26 stainless steel
Blade treatment: -
Handle: ram horn
Blade length: 110mm.
Blade thickness: 3mm.
Length closed: 150mm.
Total length: 270mm.
Thick when closed: 19mm
Balancing: -
Weight: 105g.
Closing: without blade lock
Clip: -
Sheath: -
Packaging: rigid packaging with artisan production certificate signed by Antonio Deroma
Note: -DR-RES-27 -
Allen Elishewitz - Custom Titanium Frame Lock - PRIVATE COLLECTION - handmade knife
Collector's knife from private collection - Handcrafted in 2001 by Allen Elishewitz - Overall in good condition, original sharpening, some small signs of wear on the titanium handle and on the back of the blade - Without certificates and packaging - Checked and certified by our Collini Cutlery internal laboratory.
Intended use: Collection
Type of production: custom
Country of production: USA
Blade: handcrafted and bevelled, in CPM-154CM stainless steel
Blade treatment: hand satin finish
Handle: full scales in titanium with blue anodizing
Blade length: 82mm.
Blade thickness: 3.5mm.
Length closed: 130mm.
Total length: 184mm.
Thick when closed: 11mm.
Weight: 96g.
Closing: framelock
Clip: removable, stainless steel
Notes: Made entirely by hand by Allen ElishewitzAE-CU-CP -
Buck - Kalinga knife 1991 - 401 - Wood - PRIVATE COLLECTION - knife
Knife withdrawn from a private collection in like new condition - Thanks to the engraving next to the BUCK logo (X series) it is possible to go back to the 1991 year of production of the knife - Complete with box and scabbard - Checked, certified by our internal laboratory. Cutlery Collini
The Kalinga, model first produced by Buck in 1969, was a favorite of Al Buck. With a large skinner blade and an ergonomic design, the Kalinga remains in addition to an important piece to collect, also an excellent choice for hunting use.
Intended use: Sports / Collection
Type of production: Industrial
Blade production: USA
Blade: full tang, 420HC stainless steel
Blade treatment: -
Handle: Wood
Blade length: 115mm.
Blade thickness: 4.5mm.
Length closed: -
Total length: 255mm.
Thick when closed: -
Balancing: -
Weight: 322g.
Closing: -
Clip: -
Sheath: brown leather
Packaging: Cardboard box with Buck logos, with certificates
Note:BU-401-CP -
Spyderco - Centofante 3 knife - PRIVATE COLLECTION - C66PBK3 - knife
Knife taken from a private collection - Like new condition - Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.
Intended use: Sports
Type of production: Industrial
Blade production: Japan
Blade: VG10 stainless steel
Blade treatment: -
Handle: Glass fiber reinforced with Nylon (FRNR)
Blade length: 79mm.
Blade thickness: 2mm.
Length closed 114mm.
Total length: 192mm.
Balancing: -
Weight: 71g.
Closing: Back Lock
Clip: removable, stainless steel
Sheath: -
Packaging:
Note: -SP-C66PBK3 -
Nieto - ToolKnife - PRIVATE COLLECTION - multipurpose knife
Knife withdrawn from a private collection - Like new condition, never used - Product made and patented around the end of the 90s by the Spanish Nieto. Checked and certified by our internal Collini Cutlery laboratory.
Through a rotation mechanism inside the handle, activated thanks to an unlocking pin, this multi-tool allows you to use a 13 cm blade or a 13 cm tool but complete with 16 uses.
Intended use: Survival / Sportsman
Blade: AN-556 stainless steel
Handle: Metal
Blade length: 120mm.
Blade thickness: 3mm.
Length closed: -mm.
Total length: 295mm.
Balancing: backward, 6cm from the lower guard branch
Weight: 325g.
Closing: -
Clip: -
Sheath: leather with screwdriver insert
Note: -NI-MT-CP -
Max Salice Sanna - Daghetta in Damasteel damask and carbon fiber - PRIVATE COLLECTION - custom
Collector's knife from a private collection - Daghetta model made by the famous Italian knifemaker Max around the early 2000s - Like new condition - Checked and certified by our internal Collini Cutlery laboratory.
Intended use: Collection / Gentleman
Type of production: Artisan
Lama production: Italy
Blade: Damasteel 61/62 Hrc damascus steel
Blade treatment: -
Handle: damasteel damask bolster, carbon fiber with titanium liners
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 195mm.
Thick when closed: 13mm.
Balancing: -
Weight: 129g.
Closing: Liner Lock
Clip: in damasteel damask
Sheath: -
Notes: ONE PIECE - custom knife handcrafted by MaxMassimiliano Salice Sanna, called Max is a master knife maker "of the first hour", active for a quarter of a century. Specialized in the construction of folding knives, he is constantly looking for new materials and innovative techniques. Max is a master of the Italian guild of knife makers, born in 1958, a Roman by birth and a Tuscan by adoption.
MAX-DAG-CP -
Sergio Consoli - Custom Liner Lock folder - N ° 271 - PRIVATE COLLECTION - handmade knife
Intended use: Collection
Type of production: Artisan by Maestro CIC Sergio Consoli
Lama production: Italy
Blade: full-tang in RWL-34 60 / 61HRC stainless steel
Blade treatment: -
Handle: carbon fiber
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 205mm.
Thick when closed: 19mm.
Balancing: -
Weight: 138g.
Closing: Liner Lock
Clip: carbon fiber
Sheath: -
Packaging:
Notes: Handmade by Maestro Sergio Consoli - knife number 271 made in 2009Acknowledgments
I currently make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:
in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded the "best table on display"
always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"
moreover, I ranked second in the competition organized by LAME D'AUTORE magazine as the best fixed hunting blade
then in 2007 at "Scarperia" I won the third prize as the best closable
but above all again in 2007, I achieved, to my great satisfaction, the level of MASTER OF ITALIAN COLTELLINAI CORPORATION, recognition received at the first exam taken.
Presentation of the craftsman
Creating a hand knife is what I consider a real art form.
The satisfaction of seeing an object that comes from your own hands, that takes shape and that reaches mechanical, artistic and aesthetic perfection is what pays me more for all the hours of work and effort it takes to create a knife completely by hand.
The passion for "cutting irons" has always been in me since I was a child and has grown with me until the almost sudden decision to build my first knife on my own, it was a "need", almost an inner need that I couldn't put it off, my hands and my mind had to start creating, of course what I had always been passionate about ... the knife!
I started at 40, in 2003, practically self-taught, I had no manual work experience, but I had been a mechanical designer for many years and this allowed me to know perfectly the technique and all the various stages of mechanical processing.
Currently I am a member, with the rank of Maestro, which is the highest, of the Italian Knifemakers Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.
What I do now is what I consider my art form ..., to create "handmade, hunting and collectible knives".
They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
I make above all folding knives, which satisfy more my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they cannot be seen, is what distinguishes a hand-made knife from an industrially made one .
The mechanics must then be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.
Of course, over the years I have refined my technique and currently I have improved even more the mechanics by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction and with an incredible sweetness.
With regard to the blades, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow exceptional wire holding and cutting quality for all types of use.
Pathically I make all the knives on my initial design, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "handmade".
Regarding the materials that I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damask, both stainless steel and carbon, for the uniqueness 'that they donate to the knife, since each damask is always different from another.
For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of colors, all beautiful, I also use the fossil ivory of mammoth, various briars, titanium and carbon fiber.
Most of the knives, however, are made entirely of steel, in order to then be engraved, always and rigorously by hand, to transform the knife even more into a real work of art ...CON-271 -
Spyderco - DAllara Rescue knife C82SBK - PRIVATE COLLECTION - collection knife
Knife withdrawn from a private collection - Rare model produced by Spyderco to commemorate New York police officer John D'allara who died when he entered the World Trade Center on September 11, 2001 - no longer in production since 2005 - Like new condition - With original box - Checked and certified by our internal Collini Cutlery laboratory.
Intended use: Sports
Type of production: Industrial
Blade production: Japan
Blade: VG10 Stainless Steel
Handle: FRN with drowned stainless steel folders
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 203mm.
Weight: 164g.
Closing: Spyderco’s Ball Bearing Lock
Clip: stainless steel
Packaging: with box
Notes: -C82SBK -
Medford Knife and Tools - TFF-1 Tactical Black Blood - PRIVATE COLLECTION - knife
Collector's knife from a private collection - Model TTFF1 by Medford with custom Black Blood treatment and black coating of the sleeve by Dino Picco by Wander Tactical - Excellent condition with original box - Regrinded - Checked and certified by our internal Collini Cutlery laboratory.
Intended use: Tactical / Collection
Type of production: Custom
Blade production: Usa
Blade: D2 steel
Blade treatment: -
Handle: aluminum and titanium
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 245mm.
Thick when closed: 13mm.
Balancing: on the guard branch
Weight: 252g.
Closure: Frame Lock
Clip: stainless steel
Sheath: -
Packaging: polymer tactical case with Medford logos
Notes: Designed and built by Greg Medford - Black Blood blade treatment and handle repainted by Wander Tactical designer Dino PiccoTTFF1-CP -
Frank Centofante - Mother of Pearl Lockback Gentleman knife - PRIVATE COLLECTION - handmade knife
Knife withdrawn from a private collection - Beautiful and rare knife made in the late 90s by the famous American Knifemaker Frank Centofante, who passed away in 2009 - Like new condition. Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.
Intended use: Collection / Gentleman
Type of production: Artisan
Blade production: USA
Blade: ATS34 stainless steel
Blade treatment: -
Handle: steel and mother of pearl
Blade length: 75mm
Blade thickness: 2.5mm.
Length closed: 103mm.
Total length: 180mm.
Thick when closed: 10mm.
Balancing: -
Weight: 86g.
Closing: Back Lock
Clip: -
Sheath: -
Packaging: -
Notes: rare artisan knife made by the well-known American cutler Frank Centofante who recently passed away, serial number 008CE-008 -
Spyderco - Sage 1 - Carbon Fiber - C123CFP knife
Knife withdrawn from a private collection - Like new condition: never used, never re-sharpened, never carried in pocket, perfect in every detail. Without original box. - Checked and certified by our Collini Cutlery internal laboratory.
Intended use: Sports
Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S30V stainless steel
Blade treatment: satin finish
Handle: carbon fiber
Blade length: 77mm.
Blade thickness: 2.7mm.
Length closed 114mm.
Total length: 181mm.
Thick when closed: 17mm.
Weight: 92g.
Closing: Liner Lock
Clip: removable, multi-position, in stainless steel
Packaging: absent
Notes: knife from private collection, like new, without boxSC123CF-A -
Brian Tighe - Pan knife - PRIVATE COLLECTION - custom knife
Knife withdrawn from a private collection - Rare model made by the famous knifemaker Brian Tighe in 2005 - Like new condition. Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.
Intended use: collection
Type of production: custom
Blade production: U.S.A.
Blade: BG-42 stainless steel
Blade treatment: Satin
Handle: titanium and carbon fiber
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 198mm.
Thick when closed: 14mm
Balancing: -
Weight: 103g.
Closure: Liner Lock
Clip: titanium
Sheath: -
Note: -BT-PIN-U -
Brian Tighe - Die Dagger knife - PRIVATE COLLECTION - custom knife
Knife withdrawn from a private collection - Rare model made by the famous knifemaker Brian Tighe in 2005 - Like new condition. Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.
Intended use: collection
Type of production: custom
Blade production: U.S.A.
Blade: BG-42 stainless steel
Blade treatment: Satin
Handle: titanium
Blade length: 953mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Thick when closed: 10mm
Balancing: -
Weight: 108g.
Closure: Frame Lock
Clip: titanium
Sheath: -
Note: -BT-DIE-T-U -
Down Under Knives - The Outback Bowie - USED - knife - L446128
USED KNIFE, TAKEN FROM PRIVATE COLLECTION
* Type: Previously purchased and used
* Condition: In good overall condition (see accompanying photos)
* Commercially available
* Sharpening: Resharpened by our workshop, also clean oxidation which has affected some portions of the edge, which is however back in working order
* Marks on blade: YES
* Marks on handle: YES, various superficial oxidation stains
* Box: Present and original, in cardboard
* Scabbard: in good condition
* Manuals, Certificates and Warranties: -
* Checked and certified by our in-house laboratoryIntended use: Hunting / Outdoor
Production type: Industrial
Blade production: Taiwan
Blade: Stainless steel 440C differentiated hardening 58/45HRC
Blade Treatment: Mirror polished
Handle: Brass, ebony wood and leather rings
Blade length: 280mm.
Blade thickness: 6mm.
Total length: 405mm.
Weight: 800g.
Scabbard: Leather
Packaging: Cardboard box
Notes: Accompanied by a whetstone.The Outback is a clear homage to the knife used by Paul Hogan in the Mr. Crocodile Dundee films, in fact it faithfully follows its shape and dimensions.
L446128-U -
Kevin Wilkins - 2005 New Brittania Linerlock - Jade G11 - Custom knife
Custom by Kevin Wilkins from 2005 from a private collection provided with original certificates signed by the craftsman.
Slight regrinding, perfectly centered blade with good retention from closed, fluid opening movement and blade without any horizontal or vertical clearance once opened. The frame lock engages in the first quarter of the race without any uncertainty and without sticking.
Globally in good condition, it shows some small marks on the G11 handles and on the back and belly of the liners. A small abrasion on the blade, on the right side near the tip of the knife.
Intended use: collection
Type of production: artisanal
Country of production: Germany
Blade: CPM-S90V stainless steel
Finish: Satin
Handle: jade Titanium and G11
Blade length: 75mm.
Blade thickness: 3.8mm.
Length closed: 110mm.
Total length: 188mm.
Thick when closed: 15.8mm
Weight: 158g.
Closure: Liner Lock
Clip: -
Sheath: -
Notes: with original warranty certificates - produced in March 2005 - from a private collectionKW-BRITTANIA -
Brian Tighe - Tac Tanto knife - craft knife
Intended use: collection
Type of production: custom
Blade production: U.S.A.
Blade: BG-42 stainless steel
Blade treatment: Satin finish
Handle: titanium and carbon fiber
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 195mm.
Thick when closed: 13mm
Balancing: -
Weight: 94g.
Closure: Liner Lock
Clip: in titanium
Sheath: -
Notes: production early 2000s, withdrawn from a private collectionBT-CUSTOM -
Ontario Knife Company - Cerberus Titanium Folder - 1776 - knife
Intended use: Sportsman / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: in steel tool D2
Blade treatment: Satin
Handle: Titanium
Blade length: 105mm.
Blade thickness: 3mm.
Closed length: 140mm.
Total length: 235mm.
Thick when closed: 13.8mm.
Weight: 172g.
Opening: through thumbstood, ambidextrous
Washers: in Teflon
Closure: Frame Lock with stainless steel leaf
Clip: stainless steel, deep pocket type, reversible and removable
Packaging: Cardboard box with Ontario Knife Company logos
Note: -ON1776 -
Ontario Knife Company - Carter 2Quared Titanium Flipper - 8876 - knife
Intended use: Sportsman / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: in steel tool D2
Blade treatment: Blackwashed
Handle: Titanium
Blade length: 90mm.
Blade thickness: 5mm.
Length closed: 123mm.
Total length: 213mm.
Thick when closed: 14.5mm.
Weight: 176g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Frame Lock with stainless steel leaf
Clip: titanium, machined from solid, removable
Packaging: Cardboard box with Ontario Knife Company logos
Notes: Design by Robert CarterON8876 -
Ontario Knife Company - Bushcraft Utility Knife - 8698 - knife
Intended use: Hiking / Hunting
Type of production: Industrial
Country of production: USA
Blade: full tang in 5160 carbon steel
Blade treatment: satin finish
Handle: walnut wood
Blade length: 103mm.
Blade thickness: 3mm.
Total length: 235mm.
Balancing: set back
Weight: 176g.
Sheath: nylon, M.O.L.L.E compatible, rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -ON8698 -
Leatherman - Skeletool KB - folding knife
Intended use: Sports
Type of production: Industrial
Country of production: USA
Blade: 420HC stainless steel
Blade treatment: Satind
Handle: 6061-T6 aluminum
Blade length: 66mm.
Blade thickness: 2.6mm.
Length closed: 87mm.
Overall length: 151mm.
Thick when closed: 11mm.
Balancing: -
Weight: 38g.
Opening: hole on the blade
Washers: in brass
Closure: Liner Lock
Clip: stainless steel, removable, with the function of a bottle opener
Sheath: -
Packaging: Cardboard box with Leatherman logos
Note: -LE832385 -
Ontario - Army P3 Quartermaster - coltello
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Industriale
Produzione Lama: USA
Lama: In acciaio inox 440A
Trattamento Lama: -
Manicatura: Anelli di cuoio
Lunghezza lama: 150mm.
Spessore lama: 4.5mm.
Lunghezza totale: 270mm.
Bilanciatura: -
Peso: 264g.
Fodero: Cuoio Marrone
Confezione: scatola in cartone con loghi Ontario
Note: -2593 -
Ontario - P4 USMC Combat knife -
Ontario - P4 USMC Combat knife -
Intended Use: Tactical / Collection
Type of production: Industrial
Production Lama USA
Blade: 440A stainless steel
Treatment Lama: -
Handle material: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 310mm.
Balance: -
Weight: 290g.
Sheath: Leather Brown
Packaging: cardboard box with logos Ontario
Notes: -2799 -
Ontario / Utilitac II - JPT-4R Tanto by Joe Pardue - coltello
Destinazione d'uso: Sportivo / EDC
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: In acciaio inox AUS-8 58HRC
Trattamento Lama: -
Manicatura: Zytel
Lunghezza lama: 85mm.
Spessore lama: 3mm.
Lunghezza chiuso: 120mm.
Lunghezza totale: 200mm.
Spessore da chiuso: 14mm.
Bilanciatura: -
Peso: 158g.
Chiusura: Liner Lock
Clip: in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Utilitac II
Note: Design by Joe Pardue2797 -
Ontario Knife Company - ASEK Rescue Strap Cutter Assembly - 1403 - multipurpose
Originally produced as an accessory to the ASEK survival knife series, this ASEK belt cutter is constructed of anodized aluminum. The ASEK Strap Cutter can also be considered a multi-tool thanks to the ceramic sharpener, the lanyard and the presence of a screwdriver. Click here for replacement blades for the ASEK Belt Cutter. The ASEK cutter blades are made in the USA.
Total length: 16.8 cm
Hardness: 55 HRC
Handle color black
Black blade color
Blade thickness: 0.064 cm
Blade material: 440 stainless steel
Blade length: 2.5 cmON1403