Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

Intended Use: Tactical/Military

Production type: Industrial
Country of Production: USA
Blade: Steel CPM-MagnaCut
Blade finish: Stonewashed
Handle: Titanium and Micarta
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 113mm.
Total length: 206mm.
Thickness when closed: 12mm.
Weight: 129g.
Closure: Frame Lock
Clip: Removable, Multiposition, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - KVT ball bearing opening system

Intended Use: Tactical / Military

Type of production: Industrial
Country of Production: USA
Blade: Steel CPM-MagnaCut
Blade treatment: Stonewashed
Handle: Titanium and blue Carbon Fiber
Blade Length: 104mm.
Blade thickness: 4mm.
Length closed: 131mm.
Total length: 235mm.
Thickness when closed: 13mm.
Weight: 132g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT opening on ball bearings - Opening via Carson Flipper system

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used in hiking phase.
* Condition: Used and resharpened, well maintained, with no particular damage or structural defects
* Commercially available: Discontinued and no longer commercially available.
* Sharpening: Re-sharpened
* Marks on blade: Signs of use.
* Marks on handle: Signs of use.
* Box: Present and complete, with DC4 sharpener used
* Scabbard: Present and in excellent condition.
* Manuals, Certificates and Warranties: -.
* Checked and Certified by our in-house laboratory

Intended Use: Hiking / All round utility

Blade: hidden tang, CoS rolled stainless steel at 60HRC
Handle: Thermorun, with stainless steel guard
Blade length: 100mm.
Blade thickness: 7mm.
Total length: 215mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 178g.
Sheath: zytel
Notes: discontinued knife, previously purchased and used - cardboard box with Fallkniven logos, watertight ABS case with Fallkniven logos, used Fallkniven DC4 sharpening stone, accompanied by leather case

The slim profile and carbon fiber handle provide comfortable and lightweight carry for the Zero Tolerance 0545. Moreover, the 0545 model is appropriately sized for serious cutting tasks. The CPM MagnaCut steel blade is balanced and highly performant.

Aesthetically, this ZT Original boasts a clean design without visible screws for the pocket clip.

Produced in the United States, the premium CPM MagnaCut steel of the blade, achieved through powdered metallurgy, excels in edge retention, corrosion resistance, wear resistance, and toughness; the stonewashed finish helps conceal signs of use.

The blade opens easily and effortlessly thanks to the KVT system with ball bearings, washers, and flipper.

Intended use: EDC/Sport/Collection

Production type: Industrial
Blade production: USA
Blade: CPM Magnacut Steel 60-63 HRC
Blade treatment: Stone Wash
Handle: Carbon Fiber and Titanium
Blade length: 81mm
Blade thickness: 2.3mm
Closed length: 109mm
Overall length: 190mm
Weight: 57g
Locking mechanism: Frame Lock
Clip: Removable, multiposition, stainless steel
Packaging: Cardboard box with Zero Tolerance logos
Notes: KVT opening on ball bearings

As an elegant and refined alternative to the original 0450, Zero Tolerance presents the 0450BLUCF model with that extra touch.

The CPM MagnaCut blade steel represents exceptional toughness, wear resistance, and unparalleled edge retention.

The classic stonewash finish of the blade with ball bearings highlights the robust side of the Frame Lock Folder and complements the blue marbled carbon front handles and the titanium handle area on the back.

With a reversible clip for pocket carry and a lanyard hole. Made in the USA.

Intended use: EDC/Sport/Collection

Production type: Industrial
Blade production: USA
Blade: CPM Magnacut steel
Blade treatment: Stone Wash
Handle: Carbon Fiber and Titanium
Blade length: 82mm
Blade thickness: 3mm
Closed length: 111mm
Overall length: 187mm
Weight: 68g
Locking mechanism: Frame Lock
Clip: Removable, multiposition, stainless steel
Packaging: Cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT opening on ball bearings

Intended Use: Tactical / Sporting

Production type: Industrial
Country of Production: USA
Blade: full tang in carbon steel CPM-3V
Blade treatment: Black Cerakote
Handle: G10 Black with stainless steel through-guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex, with Nylon belt attachment system, removable
Packaging: cardboard box with Zero Tolerance logos
Notes: limited edition Sprint Run edition (not numbered) designed for the international market only

Protect your multifunction tool with these revised nylon sheaths.

Every detail is designed to ensure the cases last a long time, are reliable and easy to use. High-quality metal rivet snap allows for a secure closure that keeps the tool safe.

It is made of durable stretch ballistic nylon with reinforced seams for better accessibility and fit. Extra pockets in this nylon sheath are made to carry a bit kit, a bit extender, and a small flashlight or marker. It fits belts up to 4.5 cm wide. The overall fit may vary depending on the accessories carried.

COMPATIBILITY.
* Free P2
* Free P4
* Signal
* Super Tool
* Surge

INTERNAL DIMENSIONS
12 x 3.8 x 2 cm

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-20CV
Blade treatment: stone washed
Handle: Bronze and Titanium
Blade length: 49mm.
Blade thickness: 3.1mm.
Length closed: 76mm.
Total length: 122mm.
Thickness when closed: 11.1mm.
Weight: 80g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings via Carson Flipper system - Limited Edition "Factory Special Series"

New "Wolf" version using a steel enriched with 1.25% Tungsten (also known as Wolfram in chemistry) which makes the edge tougher, more resilient and provides greater sharpness retention.

Intended use: tactical/military/hunting

Blade: full tang in San-Mai VG-10Wolf / 420J2 59HRC stainless steel
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: set back 2.5cm from the lower guard branch.
Weight: 150g.
Sheath: leather
Notes: official knife of Swedish Air Force pilots since 1995. 

Intended use: Hiking / Hunting

Production type: industrial
Country of Production: Japan
Blade: full tang, stainless steel Elmax at 61/62HRC
Blade finishing: black coating (Tungsten Carbide)
Handle: Thermorun
Blade Length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -

Intended use: Hiking / Hunting

Production type: industrial
Country of production: Japan
Blade: full tang, made of Elmax stainless steel at 61/62HRC
Blade finishing: satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -

Antonini artisans from Maniago have created an exclusive and limited series of OLD BEAR knives using the famous Japanese SANMAI steel in VG10 with 67 layers. This beautiful project combines the tradition of a successful knife, patented and built in Italy, with the history and qualitative excellence of Japanese steel, made with a production process that dates back to that used for the famous Japanese swords.

The thickness of the blade goes from 2 mm of the standard models to 2.5 mm of this exclusive series, in order to make the knife more robust and performing.

To make the knife even more exclusive, for each of the three sizes offered, 60 exclusive pieces have been created, with progressive numbering engraved on the blade

Type of production: semi-artisanal
Production Lama: Italy
Blade: San Mai 67 VG10 damask stainless steel (60/61 HRC)
Handle: in plywood with satin brass ring with nickel plating
Blade length: 100mm.
Blade thickness: 2.5mm.
Closed length: 127mm.
Thick when closed: 22mm.
Total length: 225mm.
Weight: 68g.
Closure: viro block

The handles are made of Italian olive wood. Being a model without return spring, the fixing of the blade to the handle is ensured by a solid safety ring in nickel plated brass equipped with a special locking device (covered by patent n. active partner of this project) which can be activated both in the open and in the closed position.

As early as 1100, expert Japanese blacksmiths combined different materials together to give Katana swords cutting, strength and flexibility previously unknown. Inspired by this tradition, Berkel has created a series of Japanese SanMai steel knives.

The blade consists of a core layer of extremely hard VG-10 steel, which keeps it sharp for a long time, and two outer plates made of 33-layer damask stainless steel per side, for greater resistance to corrosion and torsion.

Characteristics of SanMai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: Collini Steel

Antonini artisans from Maniago have created an exclusive and limited series of OLD BEAR knives using the famous Japanese SANMAI steel in VG10 with 67 layers. This beautiful project combines the tradition of a successful knife, patented and built in Italy, with the history and qualitative excellence of Japanese steel, made with a production process that dates back to that used for the famous Japanese swords.

The thickness of the blade goes from 2 mm of the standard models to 2.5 mm of this exclusive series, in order to make the knife more robust and performing.

To make the knife even more exclusive, for each of the three sizes offered, 60 exclusive pieces have been created, with progressive numbering engraved on the blade

Type of production: semi artisanal
Production Lama: Italy
Blade: San Mai 67 VG10 damask stainless steel (60/61 HRC)
Handle: olive wood
Blade length: 90mm.
Blade thickness: 2.5mm.
Closed length: 120mm.
Thick when closed: 22mm.
Total length: 212mm.
Weight: 65g.
Closure: viro block

The handles are made of Italian olive wood. Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent n. of this project) which can be activated both in the open position and in the closed position.

As early as 1100, expert Japanese blacksmiths combined different materials together to give Katana swords cutting, strength and flexibility previously unknown. Inspired by this tradition, Berkel has created a series of Japanese SanMai steel knives.

The blade consists of a core layer of extremely hard VG-10 steel, which keeps it sharp for a long time, and two outer plates made of 33-layer damask stainless steel per side, for greater resistance to corrosion and torsion.

Characteristics of SanMai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or with a damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: Collini Steel

Antonini artisans from Maniago have created an exclusive and limited series of OLD BEAR knives using the famous Japanese SANMAI steel in VG10 with 67 layers. This beautiful project combines the tradition of a successful knife, patented and built in Italy, with the history and qualitative excellence of Japanese steel, made with a production process that dates back to that used for the famous Japanese swords.

The thickness of the blade goes from 2 mm of the standard models to 2.5 mm of this exclusive series, in order to make the knife more robust and performing.

To make the knife even more exclusive, for each of the three sizes offered, 60 exclusive pieces have been created, with progressive numbering engraved on the blade

Type of production: semi artisanal
Production Lama: Italy
Blade: San Mai 67 VG10 damask stainless steel (60/61 HRC)
Handle: in walnut wood
Blade length: 80mm.
Blade thickness: 2.5mm.
Closed length: 109mm.
Thick when closed: 22mm.
Total length: 190mm.
Weight: 46g.
Closure: viro block

The handles are made of antique and oiled walnut wood. Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent n.1187282 filed again in 1985 by the Todesco company of Maniago which is an active partner of this project) which can be activated both in the open position and in the closed position.

As early as 1100, expert Japanese blacksmiths combined different materials together to give Katana swords cutting, strength and flexibility previously unknown. Inspired by this tradition, Berkel has created a series of Japanese SanMai steel knives.

The blade consists of a core layer of extremely hard VG-10 steel, which keeps it sharp for a long time, and two outer plates made of 33-layer damask stainless steel per side, for greater resistance to corrosion and torsion.

Characteristics of SanMai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or with a damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: Collini Steel

Diamond sharpener excellent for recovering the sharpness of blades with particularly hard steels

Rod length of 30cm. and total length of 43cm.
Thermoplastic handle and steel ring.

Quality level: high

Old Bear ™ is the new and exclusive line of pocket knives produced by Antonini from Maniago. This series is characterized by simple and ergonomic shapes, celebrates the 90th anniversary of the company foundation (1925-2015) and is made using traditional production techniques with a high level of manual skills.

Type of production: semi artisanal
Country of production: Italy
Blade: 420 stainless steel 54/56 HRC
Handle: in American walnut wood
Blade length: 70mm.
Blade thickness: 2mm.
Closed length: 115mm.
Thick when closed: 22mm.
Total length: 175mm.
Weight: 55g.
Closure: in brass, with lock both in opening and closing

The handles are made of oiled American walnut wood while the blade made of stainless steel, sharpened and hand-picked on the stone by skilled craftsmen.

Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent n.1187282 filed again in 1985 by the Todesco company of Maniago which is an active partner of this project) which can be activated both in the open position and in the closed position.

This product was built by subjecting the necessary raw materials to artisanal treatments such as to make every single knife unique, original and non-standardized. Any surface irregularities represent the confirmation of our manual processing and do not absolutely affect the operational functionality of the tool.

Support with two different bars, one in ceramic and one in diamond.

The yellow diamond sharpening stone (25 microns) is used to make a fine sharpening, with the white ceramic stone (9 microns) the edge of the knife is polished in order to obtain a razor-sharp edge.

For cleaning, use some dish soap and hot water.

Dimensions of the diamond / ceramic part:

10 cm x 2 cm

Total size open with plastic handle:

22 cm

Closed size:

12 cm x 3 cm

Weight: 65 gr

Diamond sharpening with two different sharpening grits.

The yellow surface consists of titanium and aluminum nitride which greatly prolongs the life of the sharpener. The rough side (44 microns) is used to recover more damaged cutting edges, while the fine side (25 microns) is used for precision sharpening.

For cleaning, use dish soap and warm water.

Like all diamond sharpeners, this whetstone is a little rough at first, but gets smoother after a period of use.

Dimensions of the diamond part:
10 cm x 2 cm

Total open size with plastic handle:
22 cm

Closed size:
12 cm x 3 cm
Weight: 67 gr

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: Japan
Blade: Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Elforyn with stainless steel heads
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed 111mm.
Total lenght: 199mm.
Thickness when closed: 24mm.
Weight: 182g.
Closure: Liner Lock
Clip: stainless steel, removable
Package: cardboard box with Fallkniven logos
Notes: new 2021 version in Elmax steel

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: Japan
Blade: Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Micarta with stainless steel heads
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed 111mm.
Total lenght: 199mm.
Thickness when closed: 24mm.
Weight: 182g.
Closure: Liner Lock
Clip: stainless steel, removable
Package: cardboard box with Fallkniven logos
Notes: new 2021 version in Elmax steel

Intended use: sporting

Type of production: industrial
Blade: Three layers rolled 3G steel (VG2 and SGPS at 62 HRC)
Blade finish: Satin finish
Country of Production: Japan
Handle: Stainless Steel 420J2 and Wood
Blade Length: 77mm.
Blade thickness: 3mm.
Length closed: 103mm.
Total length: 180mm.
Weight: 75g.
Closure: Liner Lock
Clip: Absent
Sheath: Nylon, with Velcro closure
Notes: -

The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, a giant of the American knife guild, who passed away in 2010. 

Intended use: collectible/sporty

Blade: 59HRC Elmax stainless steel
Handle: 420J2 stainless steel and Elforyn inserts
Blade length: 67mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 165mm.
Weight: 72g.
Closure: Liner Lock
Clip: not present
Scabbard: Nylon 
Notes: -

Based on the award-winning ZT 0999, the 0990 simplifies this legendary design. Despite the skeletonized structure, this ZT is reliable and robust thanks to the steel structure.

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber and steel
Blade length: 83mm.
Blade thickness: 3mm.
Closed length: 114mm.
Total length: 193mm.
Thick when closed: 114mm.
Weight: 82g.
Closure: liner lock
Clip: Removable, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: flipper opening system on ball bearings - Manual KVT ball bearings

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Black carbon fiber with aluminum spacers
Blade length: 86mm.
Blade thickness: 3mm.
Closed length: 126mm.
Total length: 206mm.
Thick when closed: 112mm.
Weight: 82g.
Closure: Sub Framelock in hardened steel
Clip: Removable, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: Tuned Detent System (TDS ™) opening system

The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, giant of the American cutlers guild, who died in 2010.

Intended use: collection / sports

Blade: Elmax 59HRC stainless steel
Handle: 420J2 stainless steel and Ironwood inserts
Blade length: 67mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 165mm.
Balancing: -
Weight: 72g.
Closure: Liner Lock
Clip: -
Sheath: nylon
Note:

Wire cutter replacement kit includes a set of replacement wire cutter inserts, two screws and a #8 Torx screwdriver for installation. Wire cutter inserts are made of premium stainless steel.

COMPATIBLE WITH:

* MUT®
* OHT
* Charge®+
* Charge®+ Forest Camo
* Charge®+ TTi
* Rebar
* Heritage Rebar
* Super Tool® 300+
* Heritage Super Tool 300
* Surge
* Surge® black and silver
* Wave®+
* Wave® black and silver
* Heritage Wave+
* Heritage Charge+
* FREE™ P2
* FREE™ P4
* Signal
* Signal® Topo
* Charge®+ G10
* 2H Wave

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: BlackWash
Handle: Titanium and G10
Blade length: 95mm.
Blade thickness: 4mm.
Closed length: 132mm.
Total length: 241mm.
Weight: 196g.
Closing system: Frame Lock
Clip: removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Note: -

Intended use: Hiking / Hunting / Collection

Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: Thermorun
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 116g.
Sheath: zytel
Note: -

Intended use: Hiking / Hunting / Collection

Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: ironwood
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 149g.
Sheath: zytel
Note: -

Old Bear ™ model specifically produced for mushroom picking thanks to the curved blade and the brush inserted in the handle

Type of production: semi artisanal
Production Lama: Italy
Blade: Tempered Aisi 420 stainless steel - HRC 54/56
Handle: walnut wood handle
Blade length: 65mm.
Blade thickness: 2mm.
Closed length: 130mm.
Thick when closed: 200mm.
Weight: 49g.
Closure: viro block

Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent n.1187282 filed again in 1985 by the Todesco company of Maniago which is an active partner of this project) which can be activated both in the open position and in the closed position.

Old Bear ™ model specifically produced for mushroom picking thanks to the curved blade and the brush inserted in the handle

Type of production: semi-artisan
Lama production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Handle: olive wood handle
Blade length: 65mm.
Blade thickness: 2mm.
Length closed: 130mm.
Thick when closed: 200mm.
Weight: 49g.
Closing: viro block

Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent no.1187282, still filed in 1985 by Todesco di Maniago, an active partner. of this project) which can be activated both in the open and closed positions.

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Stonewashed
Handle: Titanium and Carbon Fiber
Blade length: 89mm.
Blade thickness: 3.1mm.
Length closed: 117mm.
Total length: 210mm.
Weight: 68g.
Closing system: Frame Lock
Clip: removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Notes: New Tuned Detent System (TDS) which allows easy knife opening, even by exerting pressure on the titanium frame lock

Intended use: EDC / Gentleman

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber with anodized aluminum spacer and stainless steel folders
Blade length: 66mm.
Blade thickness: 3mm.
Length closed: 94mm.
Total length: 157mm.
Thick when closed: 10mm
Weight: 51g.
Closure: SlipJoint
Clip: -
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Jens Anso

Intended use: Sports

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV 60 / 62HRC stainless steel
Blade finish: BlackWash
Handle: G-10
Blade length: 82.5mm.
Blade thickness: 3.1mm.
Length closed: 112mm.
Total length: 194mm.
Thick when closed: 11.2mm.
Weight: 122g.
Closing: Liner Lock
Clip: Removable and reversible in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe quick opening via Carson Flipper system

Intended use: Sports

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV 60 / 62HRC stainless steel
Blade finish: Stone Washed
Handle: G-10
Blade length: 82.5mm.
Blade thickness: 3.1mm.
Length closed: 112mm.
Total length: 194mm.
Thick when closed: 11.2mm.
Weight: 122g.
Closing: Liner Lock
Clip: Removable and reversible in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe quick opening via Carson Flipper system

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Stonewashed
Handle: Titanium and G10
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 132mm.
Total length: 241mm.
Weight: 196g.
Closing system: Frame Lock
Clip: removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Note: -

Intended use: EDC / Gentleman

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber with anodized aluminum spacer and stainless steel folders
Blade length: 66mm.
Blade thickness: 3mm.
Length closed: 94mm.
Total length: 157mm.
Thick when closed: 10mm
Weight: 51g.
Closure: SlipJoint
Clip: -
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Jens Anso

Intended use: Hiking / Hunting / Collection
Type of production: industrial
Origin: Lama: Japan
Blade: in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: ironwood
Blade length: 9.5mm.
Blade thickness: 4.5mm.
Total length: 210mm.
Balancing: set back to 2cm. from the guard branch
Weight: 148g.
Sheath: black leather
Note: -

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
Community

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
Community

Old Bear ™ is the new and exclusive line of pocket knives produced by the Antonini firm from Maniago. This series is characterized by simple and ergonomic shapes, celebrates the 90th anniversary of the company foundation (1925-2015) and is realized by engaging traditional production techniques with a high degree of manual skill.

9377/19 Grafting - Grafting

Type of production: artisan seeds
Lama production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Handle: in walnut wood
Blade length: 75mm.
Blade thickness: 2mm.
Closed length: 109mm.
Thick when closed: 22mm.
Total length: 185mm.
Weight: 42g.
Closure: viro block

The handles are made of antique walnut and oiled wood, while the blade made of stainless steel is sharpened and picked up by hand on the stone by skilled artisan hands.
Being a model without a return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring with a special locking device (covered by patent n.1187282 deposited again in 1985 by the Todesco company of Maniago which is an active partner of this project) that can be activated both in the open position and in the closed position.
Send feedback
History
Saved
Community

Old Bear ™ is the new and exclusive line of pocket knives produced by the Antonini firm from Maniago. This series is characterized by simple and ergonomic shapes, celebrates the 90th anniversary of the company foundation (1925-2015) and is realized by engaging traditional production techniques with a high degree of manual skill.

9327/19 Electrician

Type of production: artisan seeds
Lama production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Handle: in walnut wood
Blade length: 80mm.
Blade thickness: 2mm.
Closed length: 109mm.
Thick when closed: 22mm.
Total length: 190mm.
Weight: 44g.
Closure: viro block

The handles are made of antique walnut and oiled wood, while the blade made of stainless steel is sharpened and picked up by hand on the stone by skilled artisan hands.
Being a model without a return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring with a special locking device (covered by patent n.1187282 deposited again in 1985 by the Todesco company of Maniago which is an active partner of this project) that can be activated both in the open position and in the closed position.

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Satin & Stonewashed
Handle: Stonewashed Titanium
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 113mm.
Total length: 206mm.
Closed thickness: 12mm.
Weight: 152g.
Closing system: Frame Lock
Clip: deep carry type, removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type or through lost ambidextrous on the blade, on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer

Compatible with the following Leatherman pliers:

* MUT®
* MUT® EOD
* Super Tool® 300
* Super Tool® 300 EOD
* Original Surge®
* Surge®
* Heritage Super Tool® 300

Heavy and robust nylon lining with Velcro closure and belt loop for both horizontal and vertical ports. Equipped with standard connections of the M.O.L.L.E. type

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: stone washed
Handle: Carbon Fiber and Titanium with anodized spacers
Blade length: 49mm.
Blade thickness: 3.1mm.
Length closed: 76mm.
Total length: 122mm.
Thick when closed: 11.1mm.
Weight: 50g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings using the Carson Flipper system

Intended use: Sports

Type of production: Industrial
Country of production: USA
Blade: 420HC stainless steel
Blade treatment: Satind
Handle: 6061-T6 aluminum
Blade length: 66mm.
Blade thickness: 2.6mm.
Length closed: 87mm.
Overall length: 151mm.
Thick when closed: 11mm.
Balancing: -
Weight: 38g.
Opening: hole on the blade
Washers: in brass
Closure: Liner Lock
Clip: stainless steel, removable, with the function of a bottle opener
Sheath: -
Packaging: Cardboard box with Leatherman logos
Note: -

Destination of use: Hiking / Hunting

Blade: hidden tang, in CoS 60mm stainless steel
Country of production: Japan
Handle: Thermorun, with stainless steel guard
Blade Length: 254mm.
Blade thickness: 7.41mm.
Overall length: 387mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 565g.
Sheath: black leather
Notes: Fallkniven cardboard box, ABS sealed cushion with fallkniven logos, Fallkniven DC4 sharpening stone with leather case

Type of production: artisanal seed
Blade production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Manicure: Olive wood
Blade Length: 100mm.
Blade thickness: 2mm.
Closed length: 127mm.
Closed thickness: 22mm.
Total length: 225mm.
Weight: 67g.
Closure: viro block

"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.

The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: M (19 cm - 7½ ") and L (cm.21 - 8¼") as above analitically presented.

The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.

BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with locking

IMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.

Type of production: artisanal seed
Blade production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Manicure: olive wood handle
Blade Length: 90mm.
Blade thickness: 2mm.
Closed length: 120mm.
Closed thickness: 22mm.
Overall length: 212mm.
Weight: 62g.
Closure: viro block

"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.

The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: S, M, L, XL.

The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.

BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with locking

IMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.

Type of production: artisanal seed
Blade production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Manicure: Multilayer Wood & Italian Flag
Blade Length: 80mm.
Blade thickness: 2mm.
Closed length: 109mm.
Closed thickness: 22mm.
Total length: 190mm.
Weight: 37g.
Closure: viro block

"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.

The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: S, M, L, XL.

The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.

BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with locking

IMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.

Type of production: artisanal seed
Blade production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Manicure: olive wood handle
Blade Length: 70mm.
Blade thickness: 2mm.
Closed length: 97mm.
Closed thickness: 22mm.
Total Length: 170mm.
Weight: 32g.
Closure: viro block

"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.

The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: M (19 cm - 7½ ") and L (cm.21 - 8¼") as above analitically presented.

The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.

BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with locking

IMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.

Type of production: artisanal seed
Blade production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Handle: multilayer handle & Italian flag
Blade Length: 70mm.
Blade thickness: 2mm.
Closed length: 97mm.
Closed thickness: 22mm.
Total Length: 170mm.
Weight: 32g.
Closure: viro block

"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.

The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: M (19 cm - 7½ ") and L (cm.21 - 8¼") as above analitically presented.

The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.

BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with locking

IMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.

Gift Box by Antonini designed for the classic Old Bear models with 19cm, 21cm and 23cm blades.
Select in the drop-down menu on the side the right size of the knife to be contained inside.

Made in Italy entirely of wood and cardboard, it gives a touch of class to your knife.

Compatibility:

AE-9307/19LN
AE-9307/21LN
AE-9307/23LN

AE-9307/19LU
AE-9307/21LU
AE-9307/23LU

AE-9307/19MT
AE-9307/21MT
AE-9307/23MT

AE-9303/19MNN
AE-9303/21MNN
AE-9303/23MNN

AE-9303/19MNK
AE-9303/21MNK
AE-9303/23MNK

AE-9305/19LN
AE-9305/21LU
AE-9305/23MNK

9307/17

Type of production: Hand seeds
Production Lama: Italy
Blade: Stainless steel AISI 420 tempered - HRC 54/56
Handle: walnut
Blade length: 70mm.
Blade Thickness: 2mm.
Closed Length: 97mm.
Thick when closed: 22mm.
Overall length: 170mm.
Weight: 34g.
Closing: viro block

"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.

The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: M (19 cm - 7½ ") and L (cm.21 - 8¼") as above analitically presented.

The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.

BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with locking

IMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.

9307/19 M

Type of production: mostly by hand
Production Country: Italy
Blade: Stainless steel AISI 420 tempered - HRC 54/56
Handle: walnut
Blade length: 80mm.
Blade Thickness: 2mm.
Closed Length: 109mm.
Thick when closed: 22mm.
Overall length: 190mm.
Weight: 36g.
Closing: rotating block

"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.

The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: S, M, L, XL.

The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.

BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with locking

IMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.

Old Bear ™ is the new and exclusive line of pocket knives produced by the maniago company Antonini. This series is characterized by simple and ergonomic shapes, celebrating the 90th anniversary of the company foundation (1925-2015) and is realized by engaging traditional production techniques with a high level of manual skills.

9307 / 21L

Type of production: semi-handmade
Lama production: Italy
Blade: Tempered Aisi 420 stainless steel - HRC 54/56
Handle: in walnut wood
Blade length: 90mm.
Blade thickness: 2mm.
Length closed: 120mm.
Thick when closed: 22mm.
Total length: 212mm.
Weight: 60g.
Closure: viro block

The sleeves are made of antique walnut and oiled, while the blade made of stainless steel, is sharpened and manually reworked on the stone by skilled craftsmen hands.

Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring with a special locking device (covered by patent n.1187282 filed again in 1985 by the company Todesco di Maniago which is active partner of this project) can be activated both in open position and in closed position.

Type of production: Hand seeds
Production Lama: Italy
Blade: Stainless steel AISI 420 tempered - HRC 54/56
Handle: walnut
Blade length: 100mm.
Blade Thickness: 2mm.
Closed Length: 127mm.
Thick when closed: 22mm.
Overall length: 225mm.
Weight: 66g.
Closing: viro block

"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.

The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: M (19 cm - 7½ ") and L (cm.21 - 8¼") as above analitically presented.

The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.

BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with locking

IMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.

Intended use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: Stainless steel Elmax
Treatment Blade: Stonewashed
Handle: Stainless Steel and CTS-204P
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 113mm.
Overall length: 206mm.
Thick when closed: 12mm.
Balancing: -
Weight: 160g.
Closure: Frame Lock
Clip: Removable, Multi position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rick Hinderer - KVT Ball Bearing System

Intended use: Tactical / Military

Type of production: Industrial
Production Country: USA
Blade: Stainless steel CPM-S35VN 59 / 61HRC
Treatment Blade: Stonewashed
Handle: Titanium and Carbon Fiber
Blade length: 104mm.
Blade thickness: 4mm.
Length closed: 131mm.
Overall length: 235mm.
Thick when closed: 13mm.
Weight: 132g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Dmitry Sinkevich - Opening KVT ball-bearing - LIMITED EDITION

The original Zero Tolerance 0454 was an award-winning collaboration between ZT and custom knife designer Dmitry Sinkevich. But it was also a very Limited Edition knife.

So ZT is doing something about that with the new 0450. While based on the original’s streamlined form and high-performance function, this new and more compact version will be much more readily available. With its 3.25-inch blade and lightweight-yet-stronger-than-steel titanium handles, the 0450 has a sleek and sophisticated look that, we think, makes it a perfect EDC.

ZT built it with an S35VN stainless blade that sharpens to a razor edge, holds it well, and can be resharpened easily. The knife opens smoothly and easily with the KVT ball-bearing opening system and built-in flipper. A titanium frame lock with hardened steel lockbar insert ensures solid lock up. Polished pivot hardware just adds to the 0450's refined good looks.

Sinkevich Folder Titanium - ZT0450 - knife

Intended use: Sport / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel CPMS35 59 / 61HRC
Treatment Lama: -
Handle: Titanium
Blade length: 82mm.
Blade thickness: 3mm.
Length closed: 111mm.
Overall length: 187mm.
Thick when closed: -
Balancing: -
Weight: 84g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Dmitry Sinkevich - Opening KVT ball-bearing

Intended use: Tactical / Military

Type of production: Industrial
Production Country: USA
Blade: Stainless Steel CPM-S35VN 59/61HRC
Treatment Llama: Stonewashed
Handle: Carbon Fibre
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 108mm.
Overall length: 190mm.
Thick when closed: 13mm.
Balancing: -
Weight: 85g.
Lock: Liner Lock
Clip: Removable and multi-position, stainless steel
Packaging: cardboard box with logos Zero Tolerance
Note: Opening system Speedsafe

Recommended use: Barbecue, Vegetable, Raw Meat, Fish

Steel: Stainless Laminate CoS 60 HRC
Production Lama Japan
Overall length: 292mm.
Blade length: 180mm.
Blade thickness: 2.5mm.
Type of sharpening: flat
Type of construction: laminated with riveted handle
Handle: birch burl
Maintenance: not dishwasher safe
Packaging: bag with zip in leather and leather sheath marked Fallkniven

Stone pocket , for sharpening , with a side ceramic 1 micron ( grain 15000 ) and with one side to the diamond 25 micron ( 600 grit ) . It has the shape of a folding knife , with quick-release mechanism with safety lock to prevent accidental opening . The closure is done by pressing and releasing the button opening .

Never before has it been so nice sharpen your knife! Not only does the new FlipStone is fun to hold and handle, but these stones for sharpening ceramic and diamond are able to create an incredible on any kind of knife sharpening .

The side of the diamond has a treatment TAN ( Alumina Titanium Nitride ) while the ceramic side is made from synthetic sapphires . Both materials are extremely durable and long lasting and come in 8 and 10 hardness on the Mohs scale ; both are able to remain perfect and long lasting , so as to ensure the best possible result , also of special steels or sintered with extremely high hardness .

The stones are joined together using special adhesives 3M and can not be separated in any way . They can be used dry or with a little water and soap or acuqa to keep the surfaces clean. If at first glance there may appear to be excessively rough , do not worry gradually become smooth with use and will improve more and more as the years to come.

Stone Size : 25x65 mm .
Open length : 165 mm.
Closed length : 98 mm .
Handle: Zytel

Accompanied by spacers, spring replacement and a handy wrench to unscrew the handles . Weights and dimensions, ideal to take with you on a trip if for quick but effective sharpening .

Quality level : High

Sharpening stone benches, with side diamond medium-grained and fine-grained ceramic side.

Dimensions of 55mm in width, 210mm in length and 6mm in thickness

Great for sharpening knives and kitchen knives sports a high level: the diamond allows a quick sharpening, suitable for everyday use on sports knives and hiking, while the ceramic allows you to work slowly ensuring a finish more accurate, especially on kitchen knives.

Intended Use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: steel CPM-S30V
Treatment Blade: Tungsten DLC Coating
Handle: G-10 with 3D finish
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 195mm.
Thick when closed: 13mm.
Balance: -
Weight: 162g.
Lock: Liner Lock
Clip: Removable, Multi position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Mick Strider and Ken Onion - SpeedSafe opening system

Pocket Stone Diamond medium grain, excellent for quickly sharpen knives and multi-purpose sports while outdoors.

Mounted on a practical nylon support, has dimensions of 20x60mm

Intended Use: Tactical / Military

Blade: full tang stainless steel San-Mai VG-10/420J2 59HRC coated black Ceracoat 8H
Handle: Kraton
Blade length: 160mm.
Blade thickness: 6mm.
Length closed:-mm.
Total length: 280mm.
Balance: advanced to 0.5cm. the branch of lower guard
Weight: 305g.
Closing: -
Clip: -
Sheath: Zytel tactical
Notes:

Survival knife - News from the Swedish company larger than the A1 model.

Thanks to its extreme solidity, strength and hardness, it lends itself easily to the most extreme and hard.

- Steel blade VG10 from 200 mm to a thickness of 6 mm
- Total length 330 mm
- Weight 380 grams
- Black leather sheath