Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Fascinating knife used by the Japanese farmer "Higonokami kanekoma."

As is typical for many agricultural tools, this Japanese knife turns out to be extremely simple but the result of centuries of refinement that has found the difficult balance between form and function, and between cost and benefit.

The main feature definitely turns out to be the quality of the blade, in fact it uses a three-layer San Mai steel of which the one in the center is extremely hard.

Production: Japanese craftsmanship
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc
Handle: brass foil with elegant black leather cover
Closure: without blade lock
Length closed: 120mm.
Blade length: 90mm.
Blade thickness: 3mm
Length open: 210mm
Weight: 72g.
Notes: lubricate the blade well otherwise easily subject to oxidation.
Packaging: elegant and fine wooden box with Japanese ideograms.

Intended use: Collection

Type of production: Artisan by CIC Master Sergio Consoli
Production Lama: Italy
Blade: In spirograph damascus steel
Blade treatment: -
Handle: bronze bolsters, timascus with titanium spacers
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 225mm.
Weight: 243g.
Closure: Liner Lock
Clip: titanium
Notes: Handmade by Master Sergio Consoli - knife number 454 made in 2018

Acknowledgments

Currently I make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:

in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded as "best table on display"

always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"

I was also ranked second in the competition organized by the magazine LAME D'AUTORE as the best fixed hunting blade

then in 2007 at "Scarperia" I won the third prize for best folding

but above all again in 2007, to my great satisfaction, I reached the degree of MASTER OF THE ITALIAN KNIVING CORPORATION, a recognition received at the first exam.

Presentation of the craftsman

Creating a knife by hand is what I consider a real art form.
The satisfaction of seeing an object that comes from one's own hands, that takes shape and reaches mechanical, artistic and aesthetic perfection is what pays me back the most for all the hours of work and effort it takes to create a knife completely. by hand.

The passion for "cutting tools" has always been in me since I was a child and grew with me until the almost sudden decision to build my first knife myself, it was a "need", almost an inner necessity that I couldn't put off, my hands and my mind had to start creating, of course, what I had always been passionate about ... the knife!

I started at 40, in 2003, practically self-taught, I had no experience of manual work, but I had been a mechanical designer for many years and this allowed me to perfectly know the technique and all the various stages of mechanical processing.

Currently I am a member, with the rank of Master, which is the highest, of the Italian Knives Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.

What I do now is what I consider my art form ..., to create "handcrafted, hunting and collectible knives".

They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
I mainly make folding knives, which satisfy my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they are not seen, is what distinguishes a knife created by hand, from one made industrially .

The mechanics then must be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.

Of course, over the years I have refined my technique and currently I have improved the mechanics even more by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction. and with an incredible sweetness.

With regard to the blades then, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow an exceptional edge hold and cutting quality for all types of use.

I make practically all the knives on an initial design of mine, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "artisanal".

Regarding the materials I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damascus, both stainless steel and carbon, for the uniqueness 'that give the knife, since each damask is always different from another.

For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of wonderful colors, I also use fossil mammoth ivory, various briars, titanium and carbon fiber.

Most of the knives, however, are made entirely of steel, in order to then be engraved, always and strictly by hand, to transform the knife even more into a real work of art ...

Charming knife used by the Japanese farmer.

As is typical for many agricultural implements, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.

The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.

It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.

Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 11mm.
Blade length: 72mm.
Blade thickness: 2.7mm
Open length: 170mm
Weight: 42g.
Note:

Intended use: Sports

Type of production: Industrial
Country of production: USA
Blade: 420HC stainless steel
Blade treatment: Satind
Handle: 6061-T6 aluminum
Blade length: 66mm.
Blade thickness: 2.6mm.
Length closed: 87mm.
Overall length: 151mm.
Thick when closed: 11mm.
Balancing: -
Weight: 38g.
Opening: hole on the blade
Washers: in brass
Closure: Liner Lock
Clip: stainless steel, removable, with the function of a bottle opener
Sheath: -
Packaging: Cardboard box with Leatherman logos
Note: -

Use: Tactical / EDC

Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless steel sintered CPM-154CM
Treatment Blade: Stone Washed
Handle: Titanium brushed
Blade length: 76mm.
Blade thickness: 4.7mm.
Overall length: 190mm.
Thickness when folded: 12mm.
Balancing: -
Weight: 115g.
Lock: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Specimen edition liminata individually numbered on the blade and box

Intended use: Tactical

Type of production: Industrial
Production Lama: 100% USA
Blade: stainless steel sintered CPM-S35VN
Treatment Lama: -
Handle: G-10 and stainless steel
Blade length: 101mm.
Blade thickness: 4.5mm.
Overall length: 223mm.
Thick when closed: 14mm.
Balancing: -
Weight: 210g.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Note: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box

Intended use: Tactical

Type of production: Industrial
Production Lama: 100% USA
Blade: stainless steel sintered CPM-S35VN
Treatment Lama: -
Handle: G-10 and stainless steel
Blade length: 101mm.
Blade thickness: 4.5mm.
Overall length: 223mm.
Thick when closed: 14mm.
Balancing: -
Weight: 210g.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Note: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box

Intended use: Tactical

Type of production: Industrial
Production Lama: 100% USA
Blade: stainless steel sintered CPM-154CM
Treatment Lama: -
Handle: G-10 and stainless steel
Blade length: 101mm.
Blade thickness: 5mm.
Overall length: 260mm.
Thick when closed: 16.5mm.
Balancing: -
Weight: 284g.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Note: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box

Intended use: Tactical

Type of production: Industrial
Production Lama: 100% USA
Blade: stainless steel sintered CTS-BD4P
Treatment Lama: Texas Tea
Handle: G-10
Blade length: 76mm.
Blade thickness: 5mm.
Total Length: 19.6mm.
Thick when closed: 13mm.
Balancing: -
Weight: 181g.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Note: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box

Intended use: Tactical / Neck

Type of production: Industrial
Production Blade: 100% USA
Blade: Titanium Beta
Treatment Blade: -
Handle: -
Blade length: 50mm.
Blade thickness: 4mm.
Total length: 76mm.
Thick when closed: -
Balancing: -
Weight: 18g.
Closure: -
Clip: -
Sheath: Kydex, thermoformed vacuum neck
Packaging: Cardboard box with logos Quartermaster
Notes: -

Intended use: Tactical

Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless Steel sintered CTS-BD4P
Treatment Blade: Texas Tea
Handle: G-10
Blade length: 89mm.
Blade thickness: 5mm.
Overall length: 241mm.
Thick when closed: 13mm.
Balancing: -
Weight: 213g.
Lock: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box

Intended use: Tactical

Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless Steel sintered CPM-154CM
Treatment Blade: Texas Tea
Handle: G-10
Blade length: 127mm.
Blade thickness: 5mm.
Overall length: 279mm.
Thick when closed: 19mm.
Balancing: -
Weight: 329g.
Closure: Subliminal Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box

Intended use: Tactical

Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless Steel sintered CPM-154CM
Treatment Blade: Stone Washed
Handle: G-10
Blade length: 127mm.
Blade thickness: 5mm.
Overall length: 279mm.
Thick when closed: 19mm.
Balancing: -
Weight: 329g.
Closure: Subliminal Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box

Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife

Charming knife used by the Japanese farmer " Higonokami kanekoma ."

As is typical for many agricultural tools , this Japanese knife is extremely simple but the result of a secular improvement that has found it difficult balance between form and function, and between cost and benefit.

The main feature is definitely the quality of the blade, in fact, uses a steel San Mai to three layers of which the one at the center rough .

It has a razor wire , as is appropriate for a tool to cut and not just born to be displayed in glass cases .

production: Japanese crafts
Blade : carbon steel, San Mai
Handle: black brass plate with elegant brown leather cover
Closure: Without lock blade
Closed Length : 120mm .
Blade length : 90mm .
Blade thickness : 3mm
Length open : 210mm
Weight: 72g .
Notes: lubricate the blade otherwise easily subject to oxidation .
Packing: elegant and fine wooden box with Japanese characters

Intended use: Tactical

Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless steel sintered Carpenter CTS BD-4P Alloy
Treatment Blade: Stone Washed
Handle: G-10
Blade length: 127mm.
Blade thickness: 5mm.
Overall length: 267mm.
Thick when closed: -
Balancing: -
Weight: 275g.
Closure: -
Clip: -
Sheath: Kydex Ghost transparent, thermoformed vacuum, fixed with Malice Clips, MOLLE compatible
Packaging: Cardboard box with logos Quartermaster
Note: Specimen liminata edition individually numbered on the blade and box

Intended use: Tactical / EDC

Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless steel sintered CPM-154CM
Treatment Blade: Stone Washed
Handle: G-10 and Stainless Steel
Blade length: 50mm.
Blade thickness: 5mm.
Overall length: 152mm.
Thick when closed: 13mm.
Balancing: -
Weight: 148g.
Lock: Frame Lock
Clip: Removable and reversible stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box

Intended use: Tactical / EDC

Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless steel sintered CPM-154CM
Treatment Blade: Stone Washed
Handle: G-10
Blade length: 70mm.
Blade thickness: 5mm.
Overall length: 178mm.
Thick when closed: 17mm.
Balancing: -
Weight: 190g.
Closure: Subliminal Frame Lock
Clip: Removable and reversible stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box

Intended use: Tactical / EDC

Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless steel sintered CPM-154CM
Treatment Blade: Stone Washed
Handle: G-10
Blade length: 70mm.
Blade thickness: 5mm.
Overall length: 178mm.
Thick when closed: 17mm.
Balancing: -
Weight: 190g.
Closure: Subliminal Frame Lock
Clip: Removable and reversible stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box

Blade: 61HRC RWL34 Stainless Steel
Handle: Walnut, Damascus and Titanium
Blade Lenght: 75mm.
Blade Thickness: 4mm.
Overall Lenght: 180mm.
Weight: 110g.
Lock: Liner lock
Clip: -
Sheath: -
Notes: Handmade in Italy by CIC Master Sergio Consoli