Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased.
* Condition: Overall in good
* Commercially available: Discontinued in 2017.
* Sharpening: Professionally re-sharpened.
* Marks on blade: Small signs of wear and tear.
* Marks on handle: None
* Box: Present and original
* Scabbard: Present and original, modified for belt carry.
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended Use: Tactical / Sporting / Neckwear

Production Type: Industrial
Country of Production: Japan
Blade: full tang, Stainless steel VG-10
Blade finish: satin finish
Handle: Micarta
Blade length: 85mm.
Blade thickness: 4mm.
Total length: 181mm.
Weight: 148g.
Sheath: Neck, boltaron, with possibility of Tek-Lok or MOLLE type attachments
Packaging: Cardboard box with Spyderco logos.
Notes: Design by Fred Perrin - Discontinued item, previously purchased, from private collection - Supplied with two removable attachments for belt carry

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

Type: Previously Purchased
Condition: in good condition
Available in stores: NO
Sharpening: Resharpened by our internal laboratory
Marks on blade: NO
Marks on handle: YES, small scratches
Packaging: YES
Checked and Certified by our internal laboratory
A pollywog represents metamorphosis in the animal kingdom, adapting and changing its form to survive in its environment. The same principle applies here. The Spyderco Poliwog CLIPIT® thrives in a small-knife-friendly environment while keeping the features necessary to excel in a harsh, heavy cutting and performance setting. Its distinctive opened-ended Ball Bearing Lock™ exposes the knife's inner workings for easy cleaning and rates as one of Spyderco's highest strength locking mechanisms. Pulling back on the ball unlocks the blade ambidextrously from either side of the knife.

The hand settles on the curved handle positioning the index finger into a choil that optimizes control and generates less fatigue and pressure on the hand during cutting. Made from VG-10, the blade has a hollow-ground edge with a weight reducing swedge-grind extending mid-spine to the tip. It is available in PlainEdge. Its ambidextrous wire-tension pocket clip sets the Poliwog tip-up in the pocket.

Intended use: Sporting / EDC

Type of production: Industrial
Blade Production: Japan
Blade: in VG10 stainless steel
Blade Treatment: -
Handle: in steel
Blade length: 55mm.
Blade thickness: 3mm.
Closed length: 86mm.
Total length: 145mm.
Thickness when closed: -
Balance: -
Weight: 116g.
Closure: Ball Bearing Lock™
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: Cardboard box with Spyderco logos
Notes: -

To celebrate Pohl Force's 15th anniversary, the popular Bravo One and Two Gen. 1 folding knife models are being reissued with a few minor updates.

From the very beginning, their compact size and shape made them ideal companions for everyday use. And that has not changed to this day. Like the Alpha Two X, on the occasion of the company's 10th anniversary, with the original handle design from the first generation. The new Classic Edition also features other details, such as the locking mechanism, the pocket clip that can be mounted on either the right or left side, and the two-handed blade opening.

It is not only the Pohl Force that is celebrating an anniversary, but also the designer and company founder Dietmar Pohl. In the early 1990s, now 30 years ago, he created his first knife designs on paper, thus opening a new chapter in his life. The Japanese steel manufacturer Hitachi's ATS-34, which is the counterpart to the American 154CM steel, was one of the most popular steels of the time. For almost a decade, ATS-34 steel remained the first choice of custom knife manufacturers, before powder metallurgy steel took off in the 2000s. To mark the company's anniversary, Dietmar Pohl was able to obtain 'his' steel again in a very limited quantity and use it for the Classic Edition of the Bravo One / Two. The highly corrosion-resistant ATS-34 impresses with its exceptional sharpness and high edge retention.

The Bravo Two Classic BK is equipped with a black fibreglass handle and a Tanto blade with an exciting two-tone finish (stonewashed/satin-finished lengthwise).


Intended use: Tactical, collection
Type of production: Industrial
Blade: Hitachi ATS-34 stainless steel
Blade finish: Dual Tone (stonewashed + satin-finished)
Handle: GRP (glass-reinforced polyester)
Blade length: 83mm.
Blade thickness: 3.5mm.
Total length: 195mm.
Thickness when closed: 14mm.
Weight: 120g.
Closure: Back Lock
Packaging: Cardboard box with Pohl Force logos
Notes: Numbered and with certificate of authenticity with signature and date of manufacture

To celebrate Pohl Force's 15th anniversary, the popular Bravo One and Two Gen. 1 folding knife models are being reissued with a few minor updates.

From the very beginning, their compact size and shape made them ideal companions for everyday use. And that has not changed to this day. Like the Alpha Two X, on the occasion of the company's 10th anniversary, with the original handle design from the first generation. The new Classic Edition also features other details, such as the locking mechanism, the pocket clip that can be mounted on either the right or left side, and the two-handed blade opening.

It is not only the Pohl Force that is celebrating an anniversary, but also the designer and company founder Dietmar Pohl. In the early 1990s, now 30 years ago, he created his first knife designs on paper, thus opening a new chapter in his life. The Japanese steel manufacturer Hitachi's ATS-34, which is the counterpart to the American 154CM steel, was one of the most popular steels of the time. For almost a decade, ATS-34 steel remained the first choice of custom knife manufacturers, before powder metallurgy steel took off in the 2000s. To mark the company's anniversary, Dietmar Pohl was able to obtain 'his' steel again in a very limited quantity and use it for the Classic Edition of the Bravo One / Two. The highly corrosion-resistant ATS-34 impresses with its exceptional sharpness and high edge retention.

The Bravo One Classic BK is equipped with a black fibreglass handle and a drop point blade with an exciting two-tone finish (stonewashed/longitudinal satin finish).


Intended use: Tactical, collection
Type of production: Industrial
Blade: Hitachi ATS-34 stainless steel
Blade finish: Dual Tone (stonewashed + satin-finished)
Handle: GRP (glass-reinforced polyester)
Blade length: 83mm.
Blade thickness: 3.5mm.
Total length: 195mm.
Thickness when closed: 14mm.
Weight: 120g.
Closure: Back Lock
Packaging: Cardboard box with Pohl Force logos
Notes: Numbered and with certificate of authenticity with signature and date of manufacture

Spyderco's Smock Knife is one of the most anticipated knives of recent times. Crafted in collaboration with renowned knifemaker Kevin Smock, the knife features a unique design that combines an elegant front opening and a push-button actuated Compression Lock locking mechanism.

Kevin Smock, a knife enthusiast since childhood, began customizing stock knives in 2012 and has subsequently developed his skills in craft knife making. His passion for knives is combined with his experience in product design, leading to the creation of innovative and unconventional knives.

Intended use: Sport/EDC

Type of production: Industrial
Blade production: Taiwan
Blade: CPM-S30V stainless steel
Blade treatment: -
Handle: Carbon Fiber
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 200mm.
Closed thickness: 11mm.
Balancing: -
Weight: 104g.
Closure: Compression Lock
Clips: Stainless steel
Scabbard: -
Packaging: Cardboard box with Spyderco logos
Note: -

The Spyderco Paramilitary 2 is one of the most popular knives on the market, known for its high build quality, premium materials, attractive aesthetics, and ease of one-handed use. These characteristics have made it very popular among soldiers, builders, hunters, survivalists, and everyday knife carriers around the world. Every knife enthusiast should have a PM2 in their collection.

The Paramilitary 2 is available in numerous versions, with different colors and materials for the blade and handle. However, it should be noted that, due to the full liners, this knife is not compatible with most aftermarket components.

The Paramilitary 2 is the second version of the old Para Military, a model designed by Spyderco as a more compact and accessible version of their Military model. If you're looking for something even more compact, the Para 3 might be the right choice.

Intended use: Sporting / Collection

Type of production: Industrial
Blade production: USA
Blade: In CPM-CRUWEAR stainless steel
Blade treatment: Satin
Handle: Micarta
Blade length: 87mm.
Blade thickness: 3.5mm.
Closed length: 122mm.
Total length: 210mm.
Closed thickness: -
Balance: -
Weight: 110g.
Closure: Compression Lock
Clip: in stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -

Intended Use: Sporting

Type of production: industrial
Blade: Bohler K390 carbon steel at 64/65HRC
Blade treatment: satin finish
Country of manufacture: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 96mm.
Blade thickness: 3mm.
Length closed: 127mm.
Total length: 222mm.
Weight: 105g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Packaging: cardboard case with Spyderco logos
Notes: variant in FRN Blue made from Bohler K390 carbon steel

Pohl Force's Quebec series is a classic mission knife that has been at the top of founder and designer Dietmar Pohl's wish list for many decades. In 2014, Pohl Force received exclusive permission from the original manufacturer to use the basic design for its interpretation.

Developed as the Ground Forces Combat & General Purpose Weapon, the multi-purpose knife was designed for the U.S. Marine Corps in the early 1950s. Although it was never officially introduced, it clearly demonstrated its capabilities in the Vietnam War, especially in the hands of American special forces. Almost 70 years after its first design, the modern Pohl Force interpretation of this classic represents the perfect fusion of old-school classic design and modern high-tech production.

Designer Dietmar Pohl has revised the design of the Quebec One and expanded the knife's range of functions. The blade of the new Quebec Two is now made of D2 steel instead of Sleipner, which brings higher levels of carbon and chromium, thus significantly improving cut and corrosion resistance. In addition, Dietmar Pohl has once again optimized the blade of the classic. The new version now has a 10 mm longer cutting edge and a secondary edge on the back.

In addition, the Pohl Force Prepper System has been integrated into the handle of the Quebec Two to safely store survival items inside the handle. A tool to open the handle screws is included. Pohl Force's new scabbard system allows for greatly increased use. The highly elaborate sheath, made of 2.5-mm-thick Kydex, with belt adapter and leg strap, allows for high carrying comfort. To attach it to the hand, the Quebec Two is equipped with a lanyard.

Total length: 315 millimeters
Blade length: 190 millimeters
Blade thickness: 6 mm
Weight: 380g
Blade material: D2 steel
Blade finish: stonewashed
Handle material: G-10
Handle thickness: 24 mm
Sheath: 2.5mm thick Kydex with Cordura belt hooks, removable
Accessories included: Lanyard 

Packaging: Cardboard box, warranty certificate
Notes: Each knife is numbered and individually signed by DIetmar Pohl on the Kydex sheath

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition
* Commercially available Discontinued since 2003
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present and original, some signs of wear and tear
* Scabbard: Not present
* Manuals, Certificates and Warranties: Yes
* Checked and certified by our internal laboratory

Intended use: Sporting

Type of production: industrial
Blade: ATS-55 stainless steel
Blade finish: satin-finished
Country of manufacture: Japan
Handle: FRN Black
Blade length: 50mm.
Blade thickness: 1.9mm.
Length closed: 70mm.
Total length: 118mm.
Weight: 36g.
Closure: Liner Lock
Clip: Removable, stainless steel
Notes: Version remained in production from approximately 1997 to 2003 - example withdrawn from a private collection, overall in very good condition.

KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition
* Commercially available Discontinued as of 2019
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present and original, but without label and with signs of wear and tear
* Scabbard: Not present
* Manuals, Certificates and Warranties: No
* Checked and certified by our internal laboratory

Intended use: Sporting

Type of production: industrial
Blade: stainless steel VG-10
Blade finish: satin-finished
Country of manufacture: Japan
Handle: FRN Black
Blade length: 94mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 213mm.
Weight: 115g.
Closure: Back Lock
Clip: Removable, double positioning, stainless steel
Notes: Version remained in production approximately from 2004 to 2019 - specimen withdrawn from private collection, overall in good condition. Equipped with retractable glass breaker and whistle integrated in the handle.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued since 2010.
* Sharpening: Factory.
* Marks on blade: slight marks near the handle, due to blade opening.
* Marks on handle: No.
* Box: Present and original
* Scabbard: not provided
* Manuals, Certificates and Warranties: no.
* Checked and Certified by our in-house laboratory




Intended Use: Sporting

Type of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: satin finish
Country of manufacture: Japan
Handle: FRN (fiberglass reinforced nylon)
Blade length: 57mm.
Blade thickness: 2.5mm.
Length closed: 84mm.
Total length: 141mm.
Weight: 34g.
Closure: Back Lock
Clip: made of FRN, integrated into the handle
Notes: Third series made by Spyderco for the Dragonfly model, version remained in production only from 2008 to 2010 - specimen withdrawn from private collection, overall in very good condition

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available Discontinued since 2010.
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Slight signs of wear, especially on clip
* Box: Present and original
* Scabbard: not provided
* Manuals, Certificates and Warranties: no.
* Checked and Certified by our in-house laboratory



Intended Use: Sporting

Type of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: satin finish
Country of manufacture: Japan
Handle: G10 Foliage Green and Stainless Steel
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 180mm.
Weight: 90g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Version remained in production only from 2008 to 2010 - specimen withdrawn from private collection, overall in good condition

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued since 2000
* Sharpening: Factory.
* Marks on blade: Small marks due to blade opening.
* Marks on handle: Small marks on metal pins.
* Box: Yes, original
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory



Intended Use: Sporting / EDC / Collection

Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel AUS-8
Blade Finish: Satin finish
Handle: G-10 with stainless steel liners
Blade length: 73mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 170mm.
Weight: 65g.
Closure: Back Lock
Clip: painted stainless steel, removable
Packaging: white cardboard box, no logos, with serial number, production code and Spyderco bar code
Notes: Knife produced in June 1997 - remained in production only from 1997 to 2000, experimental version of the Calypso Jr. model.

Knife withdrawn from private collection - Model produced from 2012 to 2016 now no longer available - Specimen in like new condition, supplied with original box - Some small signs of wear on the rear handle, at the height of where the clip rests against the titanium - Checked and certified by our in-house laboratory




Intended Use: Sporting

Production type: Industrial
Country of manufacture: Taiwan
Blade: Stainless steel CTS-XHP
Blade finish: Stone Washed
Handle: Titanium
Blade length: 65mm.
Blade thickness: 4.5mm.
Length closed: 87mm.
Total length: 152mm.
Thickness when closed: -
Weight: 102g.
Closure: Frame Lock
Clip: Stainless Steel
Packaging: Cardboard box with Spyderco logos
Notes: Design by Marcin Slysz - Knife withdrawn from private collection in like-new condition

Knife withdrawn from private collection - model now discontinued and no longer available - 83mm blade "small" version - overall in excellent condition, shows no signs of wear or use - factory sharpening in perfect condition - no packaging - checked and certified by our in-house laboratory.

Intended Use: Sporting / EDC

Type of production: Industrial
Country of manufacture: USA
Blade: Stainless steel CPM-S30V
Blade finish: satin finish
Handle: G-10 with stainless steel liners
Blade length: 83mm.
Blade thickness: 3.5mm.
Length closed: 117mm.
Total length: 201mm.
Weight: 155g.
Closure: Back Lock
Clip: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: discontinued knife - withdrawn from private collection, overall in very good condition

With the new Charlie generation, designer Dietmar Pohl continues the successful series of minimalist and extremely durable knives. Whether for everyday use or as an ultra-flat reserve knife for outdoor activities, the new Charlie Two covers a wide range of applications.

The modern Spear Point blade and handle of the Charlie Two are made of 6-millimeter thick D2 tool steel, which gives the knife a level of strength and edge retention. The Stonewashed finish creates a scratch-resistant surface and increases the blade's corrosion resistance.

Using CNC technology, all details are elaborately milled on the handle specially designed for the new Charlie series. The rounded tang and grooved areas for the index finger and thumb ensure a comfortable and secure grip. 

The Charlie Two comes with a sturdy, high-quality black Kydex sheath. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and secure carrying.

Intended Use: Tactical/Sporting

Blade: Full tang made of D2 steel at 59/60HRC with Stonewashed finish
Handle: -
Blade length: 95mm.
Blade thickness: 6mm.
Total length: 210mm.
Weight: 152g.
Sheath: made of kydex, with Tac-Clip (Tek-Lok type) multi-position attachment
Packaging: cardboard box with Pohl Force logos, Certificate of authenticity numbered and signed

Knife withdrawn from a private collection - Condition like new - Re-sharpened by our sharpening laboratory - Original box - Knife checked and certified by our internal laboratory

Intended use: Sports

Type of production: industrial
Blade: VG-10 58HRC stainless steel
Blade treatment: satin finish
Production Lama: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Closed length: 107mm.
Total length: 180mm.
Weight: 68g.
Closure: Back Lock
Clip: removable, multi-position, in stainless steel
Notes: Flat Ground sharpening

Knife collected from private collection - Absolutely like new, old production CPM-S30V steel - Never used - Original sharpening - Original box, slightly marked, with certificates - Knife checked and certified by our internal laboratory

Intended Use: Sporting / Tactical

Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S30V
Blade Treatment: Stonewashed
Handle: G-10
Blade Length: 75mm.
Blade thickness: 3.7mm.
Length closed: 109mm.
Total length: 184mm.
Weight: 96g.
Closure: Compression Lock
Clip: Stainless steel
Package: cardboard box with Spyderco logos
Notes: like new knife, taken from a private collection

Based on the well-known MK-8, designer Dietmar Pohl has developed the new Tactical Eight. Reduced in weight and more compact in size, the Tactical Eight is still a knife in all respects, versatile for professional users.

The sturdy 17.4cm long and 6mm thick Bowie blade is suitable for a wide range of applications. For high edge retention and blade resilience, the choice fell on the well-known D2 tool steel.

The stonewashed finish creates a scratch-resistant surface and also increases the blade's resistance to corrosion. A hidden hole at the end of the grip offers the possibility to mount a lanyard (included).

The Kydex® sheath of the Tactical Eight with a material thickness of 2.5mm provides the basis for a well thought-out and durable carrying system that fully meets the high demands placed on a tactical knife in practice.

Intended use: Collection / Sports

Blade: Full tang in D2 steel at 59 / 60HRC
Handle: In G-10
Blade length: 170mm.
Blade thickness: 6mm.
Total length: 315mm.
Weight: 375g.
Sheath: in kydex
Packaging: box with numbered certificate

Basato sul noto MK-9, il designer Dietmar Pohl ha sviluppato il nuovo Tactical Nine. Ridotto nel peso e più compatto nelle dimensioni, il Tactical Nine è comunque un coltello a tutti gli effetti.

La robusta lama spear point lunga 20 centimetri e spessa 6 millimetri è adatta per un'ampia gamma di applicazioni. Per un'elevata ritenzione del filo e resilienza della lama, la scelta è ricaduta sul noto acciaio per utensili D2.

La finitura stonewashed crea una superficie antigraffio e aumenta anche la resistenza della lama alla corrosione. Il design delle guancette a forma di gradino offorno una presa eccellente e sicura. Per lavori potenti o delicati, l'incavo delle dita pronunciato e anche arrotondato davanti alla protezione consente al coltello di protendersi in avanti. Un foro nascosto all'estremità della maniglia offre la possibilità di montare un cordino (incluso).

Il fodero in Kydex del Tactical Nine ha uno spessore del materiale di 2,5 millimetri che fornisce la base per un sistema di trasporto ben congegnato e resistente e che soddisfa pienamente le elevate esigenze poste in pratica su un coltello tattico. Un cosciale, regolabile all'infinito nelle dimensioni, con chiusura a scatto consente di fissarlo alla coscia di chi lo indossa. 

Destinazione d'uso: Collezione/Sportivo

Lama: Full tang in acciaio D2 a 59/60HRC
Impugnatura: In G-10
Lunghezza lama: 200mm.
Spessore lama: 6mm.
Lunghezza totale: 345mm.
Peso: 482g.
Fodero: in kydex
Confezione: Patch 3D certificato numerato

With the Pohl Force MK-8 and MK-9 knives at its side, the legendary Rambo series (1982-2019), which like no other has made the knife the most important part of its equipment on the big screen, comes to an end.

The Pohl Force LAST BLOOD® CNC² Edition MK-9 is a perfectly designed knife in the eye-catching Spear Point style that looks like a modern, tactical tool in the unmistakable Pohl design.

Only strong and high quality materials are used for its manufacturing: the stainless steel 90Cr18MoV (440C) hardened at 57/58HRC gives the 23cm long and 6mm thick blade a high corrosion resistance and an excellent edge retention. The full tang construction is topped with a micarta handle that ends in an aesthetic element that can be used as a striking tool.

The micarta machining gives the handle a distinctive look with three-dimensional millings, and the handle and blade are visually connected by a CNC-milled guard machined from a solid block of stainless steel. A subhilt on the underside of the handle provides maximum control in handling the blade giving the MK-9 a distinctive look. It is completed by the ever-present knotted camouflage paracord lanyard that distinguishes all Pohl Force productions and matches exactly the same paracord used in the filming of the movie.

The knife comes with a leather sheath of the highest quality and is sold with a 3D Velcro patch and a cloth for care and cleaning.

Intended Use: Collection

Blade: Full tang stainless steel 90Cr18MoV (440C) at 57/58HRC
Handle: Micarta
Blade length: 230mm.
Blade thickness: 6mm.
Total lenght: 380mm.
Weight: 658g.
Scabbard: Leather
Packaging: 3D Velcro patch - Cleaning cloth

With the Pohl Force MK-8 and MK-9 knives at its side, the legendary Rambo series (1982-2019), which like no other has made the knife the most important part of its equipment on the big screen, comes to an end.

The Pohl Force LAST BLOOD® CNC² Edition MK-8 is a perfectly designed knife in the classic Bowie style that, despite its historical roots, presents itself as a modern, tactical tool in the unmistakable Pohl design.

Only high quality, durable materials are used in its construction: Stainless steel 90Cr18MoV (440C) hardened to 57/58HRC gives the 20cm long, 6mm thick Bowie blade high corrosion resistance and excellent edge retention. The full tang construction culminates in a G-10 handle that finishes with a unique aesthetic element that impresses with its dramatic design.

The black surface with three-dimensional millings on the handle contrasts colourfully with the blade in a two-tone finish. The handle and blade are visually connected by a CNC-milled guard machined from a solid block of stainless steel. It is completed by the ever-present knotted paracord camouflage lanyard that distinguishes all Pohl Force productions and corresponds exactly to the same paracord used in the filming of the movie.

The knife comes with a top-quality leather sheath and is sold with a 3D Velcro patch and a cloth for care and cleaning.

Intended use: Collection

Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57/58HRC
Handle: In G-10
Blade length: 200mm.
Blade thickness: 6mm.
Total length: 350mm.
Weight: 538g.
Scabbard: Leather
Packaging: 3D Velcro patch - Cleaning cloth

With the Pohl Force MK-8 and MK-9 knives at its side, the legendary Rambo series (1982-2019), which like no other has made the knife the most important part of its equipment on the big screen, comes to an end.

The Pohl Force LAST BLOOD® CNC² Edition MK-9 is a perfectly designed knife in the eye-catching Spear Point style that looks like a modern, tactical tool in the unmistakable Pohl design.

Only strong and high quality materials are used for its manufacturing: the stainless steel 90Cr18MoV (440C) hardened at 57/58HRC gives the 23cm long and 6mm thick blade a high corrosion resistance and an excellent edge retention. The full tang construction is topped with a micarta handle that ends in an aesthetic element that can be used as a striking tool.

The micarta machining gives the handle a distinctive look with three-dimensional millings, and the handle and blade are visually connected by a CNC-milled guard machined from a solid block of stainless steel. A subhilt on the underside of the handle provides maximum control in handling the blade giving the MK-9 a distinctive look. It is completed by the ever-present knotted camouflage paracord lanyard that distinguishes all Pohl Force productions and matches exactly the same paracord used in the filming of the movie.

The knife comes with a high quality thermoformed Kydex® sheath with belt loop and thigh stopper and is sold with a certificate of manufacture, a 3D Velcro patch, a care and cleaning cloth and a Nylon Zip bag with Pohl Force logos.

Each knife is numbered on both the blade and certificate.

Intended use: Collection

Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57/58HRC
Handle: Micarta
Blade length: 230mm.
Blade thickness: 6mm.
Total lenght: 380mm.
Weight: 658g.
Scabbard: Thermoformed, in Kydex
Package: Warranty certificate with serial number - 3D Velcro patch - Cleaning cloth - Soft Nylon pouch with zipper and Pohl Force logos.

With the Pohl Force MK-8 and MK-9 knives at its side comes the conclusion of the legendary Rambo series (1982-2019), which like no other has made the knife the most important part of its equipment on the big screen.

The Pohl Force LAST BLOOD® CNC² Edition MK-8 is a perfectly designed knife in the classic Bowie style that despite its historical roots presents itself as a modern, tactical tool in the unmistakable Pohl design.

Only high quality and resistant materials are used for its production: the stainless steel 90Cr18MoV (440C) hardened at 57/58HRC gives to the Bowie blade, 20cm long and 6mm thick, a high resistance to corrosion and an excellent edge retention. The full tang construction culminates in a G-10 handle that ends in a unique aesthetic element that impresses with its dramatic design.

The black surface with three-dimensional millings on the handle sits in chromatic contrast to the two-tone finish blade. The handle and blade are visually connected by a CNC-milled guard machined from a solid block of stainless steel. It is completed by the ever-present knotted camouflage paracord lanyard that distinguishes all Pohl Force productions and matches exactly the same paracord used in the filming of the movie.

The knife comes with a high quality thermoformed Kydex® sheath with belt loop and thigh stopper and is sold with a certificate of manufacture, a 3D Velcro patch, a care and cleaning cloth and a Nylon Zip bag with Pohl Force logos.

Each knife is numbered on both the blade and certificate.

Intended use: Collection

Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57/58HRC
Handle: In G-10
Blade length: 200mm.
Blade thickness: 6mm.
Total length: 350mm.
Weight: 538g.
Scabbard: Thermoformed, in Kydex
Package: Warranty certificate with serial number - 3D Velcro patch - Cleaning cloth - Soft Nylon pouch with zipper and Pohl Force logos.

Intended Use: Tactical / EDC

Production Type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S30V
Blade Treatment: Satin finish
Handle: G10 with embedded stainless steel liners
Blade length: 101mm.
Blade thickness: 3.7mm.
Length closed: 136mm.
Total length: 236mm.
Thickness when closed: 11mm.
Weight: 150g.
Closure: Front Lock
Clip: multi-position, stainless steel, removable and reversible
Package: cardboard box with Spyderco logos
Notes: Design by Michael Janich

Intended use: Sports / EDC

Type of production: Industrial
Country of production: Japan
Blade: Bohler K390 carbon steel at 64 / 65HRC
Blade finish: Satin finish
Handle: FRN
Blade length: 57mm.
Blade thickness: 2.5mm.
Closed length: 84mm.
Total length: 141mm.
Weight: 34g.
Closure: Back Lock
Clip: in stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: variant in Blue FRN made of Bohler K390 carbon steel

Intended use: Sports

Type of production: industrial
Blade: Bohler K390 carbon steel at 64 / 65HRC
Blade treatment: satin finish
Country of production: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Closed length: 107mm.
Total length: 180mm.
Weight: 66g.
Closure: Back Lock
Clip: removable, multi-position, in stainless steel
Packaging: cardboard box with Spyderco logos
Notes: variant in Blue FRN made of Bohler K390 carbon steel

Intended use: Sports

Type of production: Industrial
Country of production: USA
Blade: CTS BD-1 stainless steel
Blade treatment: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 75mm.
Blade thickness: 3.8mm.
Closed length: 109mm.
Total length: 184mm.
Weight: 68g.
Closure: Compression Lock
Clip: removable and reversible, flush, in stainless steel
Packaging: cardboard box with Spyderco logos
Notes: lighter and cheaper version of the Para 3 C223GP model

Kelly McCann is one of the world's foremost experts on counter-terrorism, counter-terrorism, close combat and all aspects of security. His decades of real-world operational experience are clearly reflected in the Canis, a no-frills folding knife optimized for personal protection.

Its extraordinary CPM® S30V® stainless steel blade combines a Wharncliffe style design with a reinforced tip and a central blade wedge to reduce weight and maximize cutting power.
The ergonomic handle features carbon fiber and G-10 scales with layered weft, drowned stainless steel liners, high-strength compression closure and a versatile four-position clip that supports all possible transport options.

Intended use: Tactical / EDC

Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S30V stainless steel
Blade treatment: Satin finish
Handle: Carbon Fiber and G10 with liners embedded in stainless steel
Blade length: 87mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 206mm.
Thick when closed: 11mm.
Weight: 116g.
Closing: Front Lock
Clip: multi-position, stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Kelly McCann