Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: -
* Scabbard: Present - Original
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory.



The SEAL Team 2000 was designed in collaboration with the Navy SEALs themselves to meet their specific needs in the field. It was introduced in 2001 and quickly became a popular knife among law enforcement professionals, military personnel and tactical knife enthusiasts.

The SOG SEAL Team 2000 Knife was created to withstand the most extreme conditions and challenges in the field, making it a reliable tool for those operating in tactical environments. Its popularity has grown over time due to its reputation as a quality knife built to last and adapt to a variety of situations.



Intended Use: Sporting/Collection

Type of production: Industrial
Blade production: Japan
Blade: AUS-6 stainless steel
Blade Finish: Powder coated
Handle: Zytel
Blade length: 180mm.
Blade thickness: 6mm.
Total length: 315mm.
Balance: on the guard branch
Weight: 359g.
Sheath: made of kydex

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available No
* Sharpening: Original
* Marks on blade: NO
* Markings on handle: NO
* Packaging: NO
* Sheath: In leather, handcrafted
* Manuals, Certificates and Warranties: YES
* Checked and Certified by our internal laboratory

Knife handcrafted by Master C.IC. (Italian Corporation of Cutlers) Livio Montagna.

Type of production: artisanal
Country of production: Italy
Blade: M390 steel at 60/61 HRC
Blade finish: satin finish
Handle: in stabilized beech wood
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 215mm.
Weight: 185g.
Sheath: handmade, in leather, hand-stitched
Packaging: NO
Note: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: knife from 2014 previously purchased and used.
* Condition: Overall in good condition.
* Commercially available Out of production.
* Sharpening: Professionally re-sharpened.
* Marks on blade: Slight superficial rub marks on matte finish.
* Marks on handle: Small superficial marks on pommel and guard.
* Box: Not present
* Scabbard: Present, original, fiberglass, nylon and cordura sheath with stainless steel thread cutter.
* Manuals, Certificates and Warranties: Not present
* Checked and Certified by our in-house laboratory



Knife launched on the market in 2014 by Fox Knives, civilian version of their Spartan Defender Military Bayonet. It has the distinction of having a trapezoidal polymer handle with the blade offset upward from the user's grip. Model now discontinued and replaced by the "Spartan 2 Leonidas" currently in production, decidedly more canonical in appearance, conformation and materials.

Intended Use: Collection / All Round Utility / Tactical

Country of Production: Italy
Blade: Stainless Steel N690Co 59/60HRC with MILSPEC MIL-C-13924 treatment
Handle: NATO Black 9011 forprene and 316L stainless steel with MILSPEC MIL-C-13927 treatment
Blade length: 185mm.
Blade thickness: 6mm.
Total length: 315mm.
Balance: On the lower guard branch
Weight: 390g.
Sheath: made of high-strength fiberglass with Cordura and ballistic Nylon exterior. The main sheath is equipped with a wire cutter plate.
Notes: knife from 2014 previously purchased and from private collection - discontinued item

KNIFE FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No
* Sharpening: Original
* Marks on blade: NO
* Marks on handle: NO
* Packaging: NO
* Scabbard: Leather, handcrafted, original with some marks due to age and storage
* Manuals, Certificates and Warranties: YES
* Checked and Certified by our in-house laboratory

Knife handcrafted by Master C.IC. (Corporazione Italiana Coltellinai - Italian Knife-makers Guild) Livio Montagna. Excellent reproduction of one of the most iconic knives ever: the classic Bowie. A knife created by Rezin Bowie in the early 19th century for his brother Jim Bowie, the famous American pioneer whose rather reckless life is now shrouded in legend.

Livio Montagna's excellent craftsmanship does justice to this piece of history with its classic and timeless stylistic features: the double guard, the clip point blade, the handle in natural material.

Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: steel 440C tempered at 59/60 HRC
Blade finish: satin finish
Handle: Deer and Buffalo - brass guard and pommel
Blade length: 197mm.
Blade thickness: 5.7mm.
Total length: 314mm.
Weight: 497g. (666g. including scabbard)
Sheath: Handcrafted, leather, hand-stitched
Packaging: NO
Notes: -

KNIFE FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Good
* Commercially available No
* Sharpening: Original
* Marks on the blade: Some scratches on the pommel, blade and guard in very good condition
* Marks on handle: Some assembly inaccuracies near the pommel, adhesive residues
* Packaging: NO
* Scabbard: Leather, handcrafted, original with some marks due to age and storage
* Manuals, Certificates and Warranties: YES
* Checked and certified by our in-house laboratory

Knife handcrafted by Master C.IC. (Corporazione Italiana Coltellinai - Italian Knife-makers Guild) Livio Montagna. Reproduction of one of the various versions of the Arkansas Toothpick, legendary frontier knife of the American 1800s. Famous, often infamous, it generally has a 30 to 50 cm blade, rather narrow and sometimes symmetrical, dagger-style. Used mainly for hunting and personal defence.

Livio Montagna's version is aesthetically very similar to the Toothpick used in Expandables 2.

The knife is distinguished by an excellent overall balance, allowing control and precision in use. The finish is of a good standard.

Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: hardened 440C steel at 58/59 HRC
Blade finish: satin finish
Handle: Ebony - 416 stainless steel guard and pommel
Blade length: 305mm.
Blade thickness: 6mm.
Total length: 445mm.
Weight: 722g. (960g. including scabbard)
Sheath: Handcrafted, leather, hand-stitched
Packaging: NO
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Not present
* Scabbard: Original, like new
* Manuals, Certificates and Warranties: Not present
* Checked and Certified by our in-house laboratory


Intended Use: Tactical / Allround Utility

Production type: Industrial
Country of Production: Taiwan
Blade: D2 57/59HRC carbon steel
Blade Finish: Blackwashed
Handle: G10
Blade length: 148mm.
Blade thickness: 6mm.
Total length: 285mm.
Balance: slightly backward
Weight: 433g.
Sheath: made of kydex, with Tek-Lok type attachment
Packaging: -
Notes: previously purchased knife, from private collection

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in excellent condition, it has some small marks on the blade from the years
* Available on the market: no longer in production, difficult to find, dating back to the 90s
* Sharpening: Original
* Marks on the blade: small scratches
* Marks on the handle: no
* Box: without box
* Sheath: in original brown leather
* Manuals, Certificates and Warranties: absent
* Checked and certified by our internal laboratory

Intended use: hunting

Intended use: collection

Type of production: artisanal
Blade: Sandvik 12C27 stainless steel
Blade treatment: mirror polishing with handcrafted engravings
Production Lama: Finland
Handle: birch burl
Blade length: 120mm
Blade thickness: 2.5mm
Closed Length: -
Total length: 235mm
Balancing: -
Weight: 150g
Closure: -
Clip: -
Sheath: leather sheath with handcrafted engravings
Note:

Knife withdrawn from private collection, like new, with original case - Model "made in Switzerland" made in collaboration with Klotzli in 1994 in about 1,000 numbered examples on the blade (about 500 plain edge and about 500 partially serrated) based on a design by famous American designer Michael Walker. Knife that combines two qualities difficult to match, especially in those years; lightness and sturdiness. Elegant gentlemen, easy to open and close with one hand thanks to the Liner-Lock system, invented by Walker himself. Peculiarities of this very rare production are also the engravings on blade and clip made by excision and not by laser.
 

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Like new
* Commercially available Discontinued.
* Sharpening: Factory sharpened, perfect
* Marks on blade: no
* Marks on handle: no
* Box: Original leather pouch with zipper and spyderco logos.
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory


Intended use: sporting / collection

Type of production: industrial
Country of production: Switzerland
Blade: stainless steel ATS-34
Blade finish: Satin finish
Handle: carbon fiber with blue anodized titanium hardware
Blade length: 64mm.
Blade thickness: 2.4mm.
Length closed: 84mm.
Total length: 149mm.
Weight: 42g.
Closure: LinerLock in blue anodized titanium
Clip: blue anodized titanium
Notes: 1994 production, discontinued, numbered on blade (#625) - Design by Michael Walker

Knife withdrawn from private collection - Unobtainable specimen, now out of production - Like new, perfect, undamaged, never taken out of the box - Complete with every certificate - Perfect original factory sharpening - Absolutely flawless specimen - Checked and certified by our in-house laboratory

Intended Use: Fighter / Tactical / Collection

Type of manufacture: Midtech
Blade: stainless steel CPM-S30V 55/57HRC
Country of Production: USA
Handle: Canvas Micarta
Blade length: 170mm.
Blade thickness: 5.8mm.
Total length: 290mm.
Balance: set back 1cm. from the lower guard branch
Weight: 356g.
Sheath: by SpecOps, cordura
Notes: Discontinued and unobtainable specimen - withdrawn from private collection - New, intact, perfect, never used, with original box and warranty certificates

Handcrafted knife collected from private collection - In like new condition - never used, with factory sharpening, accompanied by craftsman's certificate and velvet fabric case - checked and certified by our in-house laboratory

Intended Use: Regional Italian / Collection

Type of production: Artisan
Country of Production: City of Pattada, Sardinia, Italy
Blade: 420 stainless steel
Blade finish: satin-finished
Handle: Sardinian mouflon horn and alpaca
Blade length: 105mm.
Blade thickness: 2.5mm.
Length closed: 125mm.
Total length: 230mm.
Thickness when closed: 17mm.
Weight: 74g.
Closing mechanism: -
Clip: -
Sheath: -
Packaging: velvet fabric sheath and certificate handcrafted production signed by Andrea Pizzadili
Notes: knife withdrawn from private collection, mint condition, like new

Famous knife produced by Gerber and dating from around the 1980s, discontinued in 1999. Version with 8 teeth serration on the back. Knife taken from a private collection: very good condition. Without cardboard box. Checked by our in-house laboratory Coltelleria Collini

Intended use: Military

Type of production: industrial
Blade: AUS-8 stainless steel
Blade treatment: micro-peening
Country of manufacture: USA
Handle: Hypalon
Blade length: 200mm. (edge length 175mm.)
Blade thickness: 6mm.
Total length: 342mm.
Balance: on the guard
Weight: 433g. (775g. including scabbard)
Notes: Serial number 006282 - In the pocket on the scabbard is the original compass - NO BOX
Scabbard: ABS and Cordura

Translated with www.DeepL.com/Translator (free version)

Knife from a private collection - Very rare and highly sought after discontinued model dating back to 2000 - Peculiar tanto blade with chisel sharpening - This is a scaled down version of Timberline's Specwar model made in collaboration with Emerson - Like new, never used, perfect in every detail, with warranty and immaculate box - Checked and certified by our in-house laboratory.

Intended Use: Tactical / Collection

Type of manufacture: Industrial
Country of Production: USA
Blade: 440C stainless steel with chisel sharpening
Blade finish: matte microbead blasting
Handle: Nylon and Fiberglass
Blade length: 95mm.
Blade thickness: 2.5mm.
Total length: 220mm.
Weight: 105g.
Sheath: Kydex
Notes: 2000 knife from a private collection - Like new

Withdrawn from a private collection, this American Buck Model 500 made in 1987 turns out to be exclusive because of the gold leaf engraving on the blade commemorating the Loon, the iconic swimming bird of Ontario, Canada, and the limited edition of only 250 pieces - Like-new condition, never used, with original Buck warranties and manuals and accompanying 1987 Canadian $1 coin, also dedicated to the Loon - Checked and certified by our in-house Coltelleria Collini laboratory.

Intended Use: Collection

Type of production: Industrial
Blade Production: USA
Blade: Engraved 420HC stainless steel
Blade Finish: Polishing
Handle: Walnut wood and Alpacca (Nickel and Silver alloy)
Blade Length: 78mm.
Blade thickness: 2.5mm.
Length closed: 111mm.
Total length: 187mm.
Thickness when closed: 18mm.
Weight: 135g.
Closure: Back Lock
Package: wooden box, original care and maintenance manuals and warranty certificate of the time
Notes: Limited edition made in only 250 numbered examples on the blade (example 169 of 250) - 1987 specimen withdrawn from private collection, in like-new condition.

Knife from private collection - Like new, never used, with original box, manuals and warranty certificates in excellent condition - Made in 1997 - "First Production Run" edition - All in mint condition. Checked and certified by our in-house laboratory.

Intended Use: Collector/Sportsman

Type of production: Industrial
Country of Production: USA
Blade: 440 stainless steel at 60HRC
Blade finish: microbead blasting
Handle: Nylon and Glass Fiber
Blade Length: 77mm.
Blade thickness: 2.5mm.
Total length: 195mm.
Weight: 81g.
Closure: Strut'N'Cut (modified back lock) or Slipjoint
Clip: removable and reversible, made of Nylon and Glass Fiber
Packaging: cardboard box with Meyerco logos
Notes: Like-new knife from private collection, dating from 1997 "First Production Run" edition, winner of Most Innovative American Knife of the Year at the Blade Show in Altlanta

Trivia:
In 1996 Blackie Collins was inducted into the Cutlery Hall of Fame. - The Strut'N'Cut knife is inspired by the soft suspension of Blackie Collins' Ducati motorcycle - In 1996 he partnered with Bill Meyer to create the Meyerco knife company. The two were immediate pioneers in the knife world, being the first company to launch an assisted-opening knife. Today Meyerco is credited with the invention of the spring-loaded knife. - Blackie Collins holds over 60 patents for knife mechanisms and many design patents for cutlery products. He was a cutlery legend and will be greatly missed.

Famous Gerber knife dating back to the 80s and discontinued in 1999 - Knife withdrawn from a private collection in like new condition - without cardboard box. Checked, sharpened and certified by our in-house Coltelleria Collini laboratory

Intended use: Military

Type of production: industrial
Blade: AUS-8 stainless steel
Blade treatment: Hypalon
Production Lama: USA
Handle: Hypalon
Blade length: 220mm.
Blade thickness: 6mm.
Total length: 372mm.
Balancing: on the guard
Weight: 465g.
Notes: serial number 045552
Sheath: in ABS and cordura

Intended use: Pocket knife

Type of production: industrial
Blade: 19C27 stainless steel
Blade treatment: -
Handle: snakewood
Blade length: 60mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 160mm.
Balancing: -
Weight: 65g.
Closing: -
Clip: -
Notes: aluminum box

Knife withdrawn from a private collection - Beautiful and rare knife made in the late 90s by the famous American Knifemaker Frank Centofante, who passed away in 2009 - Like new condition. Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: Collection / Gentleman

Type of production: Artisan
Blade production: USA
Blade: ATS34 stainless steel
Blade treatment: -
Handle: steel and mother of pearl
Blade length: 75mm
Blade thickness: 2.5mm.
Length closed: 103mm.
Total length: 180mm.
Thick when closed: 10mm.
Balancing: -
Weight: 86g.
Closing: Back Lock
Clip: -
Sheath: -
Packaging: -
Notes: rare artisan knife made by the well-known American cutler Frank Centofante who recently passed away, serial number 008

Knife withdrawn from a private collection - Like new condition: never used, never re-sharpened, never carried in pocket, perfect in every detail. Without original box. - Checked and certified by our Collini Cutlery internal laboratory.

Intended use: Sports

Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S30V stainless steel
Blade treatment: satin finish
Handle: carbon fiber
Blade length: 77mm.
Blade thickness: 2.7mm.
Length closed 114mm.
Total length: 181mm.
Thick when closed: 17mm.
Weight: 92g.
Closing: Liner Lock
Clip: removable, multi-position, in stainless steel
Packaging: absent
Notes: knife from private collection, like new, without box

USED KNIFE, TAKEN FROM PRIVATE COLLECTION
* Type: Previously purchased and used
* Condition: In good overall condition (see accompanying photos)
* Commercially available 
* Sharpening: Resharpened by our workshop, also clean oxidation which has affected some portions of the edge, which is however back in working order
* Marks on blade: YES
* Marks on handle: YES, various superficial oxidation stains
* Box: Present and original, in cardboard
* Scabbard: in good condition
* Manuals, Certificates and Warranties: -
* Checked and certified by our in-house laboratory

Intended use: Hunting / Outdoor

Production type: Industrial
Blade production: Taiwan
Blade: Stainless steel 440C differentiated hardening 58/45HRC
Blade Treatment: Mirror polished
Handle: Brass, ebony wood and leather rings
Blade length: 280mm.
Blade thickness: 6mm.
Total length: 405mm.
Weight: 800g.
Scabbard: Leather
Packaging: Cardboard box
Notes: Accompanied by a whetstone.

The Outback is a clear homage to the knife used by Paul Hogan in the Mr. Crocodile Dundee films, in fact it faithfully follows its shape and dimensions.

LoneWolf - Loveless City - Micarta knife

Intended use: Pocket Knife

Type of production: industrial
Blade: stainless steel 19c27
Treatment Blade: -
Handle: micarta loveless
Blade length: 60mm.
Blade Thickness: 2.5mm.
Closed Length: 95mm.
Overall length: 160mm.
Balancing: -
Weight: 65g.
Closure: -
Clip: -
Notes: aluminum box