Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
ExtremaRatio - Shrapnel knife - Geo Camo - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased - SERIAL CK0269D
* Condition: quite good, the knife was used for medium/light cuts
* Commercially available: Out of production
* Sharpening: Factory sharpened
* Marks on blade: various due to use (see related photos), mostly rubbing/slight polishing
* Marks on handle: slight
* Box: Present, one side was damaged and was fixed with tape
* Scabbard: original
* Manuals, Certificates and Warranties: - -
* Checked and certified by our in-house laboratoryIntended Use: Tactical/Sporting
Production type: Industrial
Country of Production: Italy
Blade: N690Co stainless steel
Finish: Geo Camo (burnishing with laser treatment)
Handle: Forprene
Blade length: 110mm.
Blade thickness: 6.3mm.
Total length: 210mm.
Balance: recessed
Weight: 212g.
Sheath: ABS sheath with Tek-Lok attachment with automatic knife retention system.
Packaging: Cardboard box with Extrema Ratio logosER-SHR-GEO-CP -
Deroma - Pattada Resolza knife handcrafted ram's horn knife - PRIVATE COLLECTION
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Available: on the market
* Sharpness: Factory
* Marks on blade: none
* Marks on handle: None
* Box: -
* Sheath: synthetic material case
* Manuals, Certificates and Guarantees: guarantee certificate
* Checked and Certified by our internal laboratoryIntended use: Regional
Type of production: Artisan
Blade production: Italy
Blade: 12c26 stainless steel
Blade Treatment: -
Handle: ram's horn
Blade length: 110mm.
Blade thickness: 3mm.
Closed length: 147mm.
Total length: 265mm.
Closed thickness: 19mm
Balancing: -
Weight: 100g.
Closure: without blade lock
Clips: -
Sheath: -
Packaging: rigid packaging with artisanal production certificate signed by Antonio Deroma
Note: -AP-DR-RES-12 -
BlackJack - Wasp Vintage Knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife from the 1990s, previously purchased.
* Condition: In very good condition
* Commercially available: discontinued
* Sharpening: Factory sharpened
* Marks on blade: Small marks given by time.
* Marks on handle: None
* Box: -
* Scabbard: Present, but presumably not original although fully compatible.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / SportingProduction Type: Industrial
Country of Production: Japan
Blade: Stainless steel AUS-8A
Blade Finish: Satin finish
Handle: Kraton
Blade length: 140mm.
Blade thickness: 6mm.
Total length: 263mm.
Balance: advanced
Weight: 225g.
Scabbard: brown leather, belt-mounted, presumably not original but fully compatible
Packaging: -
Notes: previously purchased knife, from private collectionBJ-WA-CP -
Randall Knives - Astro Model 17 - PRIVATE COLLECTION - custom knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, in excellent condition.
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory.Designed specifically for the seven Mercury Program astronauts, the Model 17 accompanied these pioneers on the United States' first manned space flights. Astronaut Gordon Cooper contributed to the final design of this knife, making it not only a survival tool, but also a piece of history. Two examples of this knife, rich in historical value, are currently on display at the Smithsonian Institution.
Intended use: utility/militaryType of production: handcrafted
Country of manufacture: USA
Blade: 440B stainless steel
Blade finish: satin-finished
Handle: micarta, brass and duralumin
Blade length: 140mm.
Blade thickness: 5mm.
Total length: 256mm.
Balance: on the guard branch
Weight: 252g.
Sheath: Black Leather
Notes: previously purchased knife, withdrawn from private collectionAP-RK-17ASCP -
Livio Montagna - 2014 Hunting Knife - RWL34 & Sambar Amber - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No.
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratoryIntended use: hunting / collection
Type of production: handcrafted
Country of production: Italy
Blade: stainless steel RWL34 hardened to 59/60 HRC
Blade finish: satin finish
Handle: amber Sambar stag with 416 stainless steel guard and pommel
Blade length: 107mm.
Blade thickness: 3.5mm.
Total length: 220mm.
Weight: 181g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.AP-MONT-CPSA -
Livio Montagna - 2017 Fighter - N690Co & Snake Wood - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No.
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratoryIntended use: hunting / collection
Type of production: handcrafted
Country of production: Italy
Blade: stainless steel N690Co hardened to 59/60 HRC
Blade finish: satin finish
Handle: Snakewood - 416 stainless steel guard and pommel
Blade length: 127mm.
Blade thickness: 4mm.
Total length: 240mm.
Weight: 185g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from a private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.AP-MONT-CPFD -
Tommy Lee - Clip Point - Damascus & Giraffe Bone - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 1990 model, in like-new condition.
* Commercially available: Unique specimen, entirely handmade; artisan passed away in 2013
* Sharpening: Factory sharpening, can be improved.
* Marks on blade: A few small oxidation marks on handle.
* Marks on handle: A few small marks on steel bolsters due to time.
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks from time
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: Collection/GentlemanType of production: Handcrafted
Country of Production: USA
Blade: full tang, handcrafted carbon damascus steel
Handle: stainless steel heads and giraffe bone handles
Blade length: 104mm
Blade thickness: 3mm.
Total length: 196mm.
Weight: 94g.
Sheath: Leather, for belt or boot, with steel clip for attachment
Packaging: -
Notes: rare handcrafted knife made in 1990 by well-known American knife maker Tommy LeeFC-TLEE-DG-CP -
Peter Herbst - Engraved Integral - CPM-T440V & Fossil Ivory - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: 03/1990 model, in like-new condition
* Commercially available: Unique knife, entirely custom made and hand-engraved
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks of time.
* Manuals, Certificates and Warranties: Certificate of authenticity with date of manufacture and craftsman's signature.
* Checked and Certified by our in-house workshopIntended Use: Collection/Gentleman
Type of production: Handcrafted
Country of Production: Germany
Blade: stainless steel CPM-T440V at 60HRC
Blade finish: mirror polish
Handle: integral from solid, fully hand-engraved, with fossil ivory grips and red micarta spacers
Blade length: 93mm
Blade thickness: 4mm.
Total length: 203mm.
Weight: 99g.
Sheath: Leather
Packaging: -
Notes: rare handcrafted knife made in March 1990 by well-known German knifemaker Peter Herbs, a member of the German Knifemakers' Guild and a member of the very prestigious American Knifemakers' Guild.FC-PHERBST-CP -
Frank Centofante - SL-10 - ATS34 & Micarta #049 - PRIVATE COLLECTION - handmade knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 12/1990 model, overall in good condition, with a few small marks from time
* Commercially available: Limited edition, numbered model, made entirely by hand; craftsman passed away in 2009
* Sharpening: Re-sharpened, a few small marks on blade due to sharpening
* Marks on blade: A few small marks
* Marks on handle: A few hairlines on the bolsters and a small dent on the left micarta handle.
* Box: -
* Scabbard: Suede leather case.
* Manuals, Certificates and Warranties: Certificate of authenticity with date of manufacture and craftsman's signature.
* Checked and Certified by our in-house laboratoryIntended Use: Collection/Gentleman
Type of production: Handcrafted
Country of Production: USA
Blade: stainless steel ATS34
Blade finish: satin finish
Handle: Stainless steel and Micarta
Blade length: 83mm
Blade thickness: 2.5mm.
Length closed: 108mm.
Total length: 189mm.
Thickness when closed: 8mm.
Weight: 99g.
Closure: Back Lock
Clip: -
Sheath: Suede leather pouch
Packaging: -
Notes: rare handcrafted knife made in December 1990 by noted U.S. knife maker Frank Centofante who passed away in 2009, serial number #049FC-SL10-CP -
MC Thiers - AX1 Vintage Knife - Green Stamina Wood - PRIVATE COLLECTION - knife
Knife from private collection - Vintage model (presumably early 90's) from Maison Coutellerie Thiers - In very good condition, never used for cutting, still shows some small signs of wear due to past time - Supplied with original leather sheath, with some small signs of wear - Checked and certified by our in-house laboratory.
Intended Use: Collection/SportsmanType of manufacture: Industrial
Country of Production: France
Blade: Stainless steel Z70CD15 (440A)
Blade finish: satin-finished
Handle: stainless steel and dark green stamina wood
Blade length: 70mm.
Blade thickness: 2.5mm.
Total length: 175mm.
Weight: 95g.
Closure: Back Lock
Clip: not present
Sheath: leather, with belt loop
Notes: knife from private collection in excellent conditionMCT-AX1-GSW -
Aitor - Jungle King II Black knife - Black Sheath - 16013 - knife
The Jungle King is a multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. A steel skinner knife is also housed inside the sheath.
Intended use: Sports / Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 135mm.
Blade thickness: 4mm.
Total length: 275mm.
Weight: 225g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logosAI-16013N -
Aitor - Jungle King I knife Black - green sheath - 16016V - knife
The Jungle King is a sturdy multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. Inside the sheath there is also a steel skinner knife.
Intended use: Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 205mm.
Blade thickness: 5mm.
Total length: 355mm.
Weight: 607g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logos16016V -
Buck - Buckmaster 184 Survival Knife -1984 - COLLEZIONE PRIVATA - vintage coltello
The legendary BuckMaster 184 Survival Knife is currently conceived and designed specifically for the Navy SEAL Team in 1980. He was created by CJ Buck (CEO of Buck Knives) and designed a small business, Qual-A-Tec, in 1981 in California. The BuckMaster is the American icon of the coltellis that emerged in the '80s and has contributed to the creation of the famous M9 bayonetta of the American army. The production was 2600 examples all'anno.
The brand new model, coming from the private collection, comes from the first production, dating back to 1984. Globally in perfect condition, only damaged and used. Only deprived of scatola.
Destination of use: Sportivo / Collezione
Production type: Industrial
Lama Production: USA
Slat: coltello entirely made in stainless steel 420HC
Lama Treatment:-
Manicure: acciaio
Blade length: 185mm.
Blade thickness: 7.5mm.
Chinese lunge: -
Total length: 315mm.
Weight of chiuso: -
Bilanciatura: arrest of the guard branch
Weight: 675g.
Chiusura:-
Clip:-
Foyer: in black ABS
Confezione:-
Note: The characteristics, brief, are data of the presence of due arpioni/ganci smontabili a vite. The function of the quest is simple ancoraggio. This coltello may be infatti used as the lancio's gancio fissando una corda all'anello present sul pomello. The product guarantees a tenuta of fine arpioni at 600 libbre. I Seals della Marina, nello specifico, avevano richiesto un coltello che potesse essere usato sott'acqua per poter ancorare i mezzi ad un punto de fissaggio subacqueo, ed ecco il reason della totale costruzione en acciaio.BUCK-184 -
Down Under Knives - The Outback Bowie Eclipse Version - DUK-EC - Knife
ECLIPSE version, in 1095 carbon steel and sheath and handle in black leather
Intended Use: Hunting / Outdoor
Type of production: Industrial
Production Country: Taiwan
Blade: carbon steel in 1095 to 58 / 59HRC
Blade treatment: mirror polishing
Handle: brass and leather rings
Blade length: 280mm.
Blade thickness: 6mm.
Overall length: 405mm.
Weight: 800g.
Sheath: Black Leather
Packaging: cardboard box with Down Under logos, sharpening steel for sharpening
Notes: The Outback is a clear homage to the knife used by Paul Hogan in the movie Crocodile Dundee, it indeed follows closely the shape and size.L446228 -
Aitor - Jungle King II Black knife Camo - 16071 - knife
The Jungle King is a multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. A steel skinner knife is also housed inside the sheath.
Intended use: Sports / Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 135mm.
Blade thickness: 4mm.
Total length: 275mm.
Weight: 225g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logosAI-16071 -
Down Under Knives - The Arkansas Toothpick Bowie - DUK-TP - knife
Intended use: Sport / Collection
Type of production: Industrial
Blade production: Taiwan
Blade: 440C stainless steel with selective tempering
Blade treatment: -
Handle: Leather rings
Blade length: 285mm.
Blade thickness: 5.5mm.
Closed length: -
Total length: 415mm.
Thickness when closed: -
Balance: -
Weight: 630g.
Lock: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with Down Under Knives logos
Notes: -L446029 -
Aitor - Commando Black knife - 16021 - knife
Aitor Commando knife with 17 cm blade and double-edged saw on the back. The hollow black aluminum and magnesium grip features a finger groove. The matte gray stainless steel cap is unscrewable and reveals inside a compass and a small survival kit stored in a clear acrylic tube sealed with o-rings.
Intended use: Collection / Sports
Blade: Teflon-coated 440C 57/58 HRC steel
Handle: Hollow, in black painted aluminum, with watertight compartment.
Blade length: 170 mm.
Blade thickness: 5 mm.
Total length: 315 mm.
Weight: 430 g.
Sheath: black PVC with Nylon loops
Accessories: Compass, Sharpening stone, Patches, Pins, Fishing hooks, Flint, Pencil, Tweezers, Needle, Scalpel, Nylon thread, Sewing threadAI-16021 -
Aitor - Commando Satin knife - 16020 - knife
Aitor Commando knife with 17 cm blade and double-edged saw on the back. The hollow black aluminum and magnesium grip features a finger groove. The matte gray stainless steel cap is unscrewable and reveals inside a compass and a small survival kit stored in a clear acrylic tube sealed with o-rings.
Intended use: Collection / Sports
Blade: 440C 57/58 HRC steel
Handle: Hollow, in black painted aluminum, with watertight compartment.
Blade length: 170 mm.
Blade thickness: 5 mm.
Total length: 315 mm.
Weight: 430 g.
Sheath: black PVC with Nylon loops
Accessories: Compass, Sharpening stone, Patches, Pins, Fishing hooks, Flint, Pencil, Tweezers, Needle, Scalpel, Nylon thread, Sewing threadAI-16020 -
Aitor - Jungle King I knife Black - 16016N - knife
The Jungle King is a sturdy multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. Inside the sheath there is also a steel skinner knife.
Intended use: Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 205mm.
Blade thickness: 5mm.
Total length: 355mm.
Weight: 607g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logosAI-16016N -
Aitor - Jungle King II Black knife - 16013N - knife
The Jungle King is a multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. A steel skinner knife is also housed inside the sheath.
Intended use: Sports / Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 135mm.
Blade thickness: 4mm.
Total length: 275mm.
Weight: 225g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logosAI-16013 -
Aitor - Jungle King III - 16017 - Survival Knife
Intended use: Sport
Type of production: Industrial
Production Blade: Spain
Blade: 440C stainless steel
Treatment Lama: -
Handle: PVC
Blade length: 106mm.
Blade thickness: 2.5mm.
Length closed: -
Overall Length: 220mm.
Thick when closed: -
Balance: -
Weight: 120g.
Closing: -
Clip: -
Sheath: PVC and nylon sling and with tourniquet
Packaging: cardboard box with logos Aitor
Notes: compass and survival kit inside the handleAI-16017 -
Boker Plus - Jim Wagner Reality-Based Blade - PRIVATE COLLECTION - 01BO053
Knife withdrawn from a private collection - Knife no longer in production since 2014 - in excellent condition, without box - Never resharpened - Checked and certified by our internal Coltelleria Collini laboratory.
Type of production: industrial
Blade: 440C 58HRC stainless steel
Blade treatment: Teflon
Handle: FNR
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: -mm.
Total length: 230mm.
Balancing: -
Weight: 168g.
Closure: Back Lock
Clip: stainless steel
Sheath: -
Notes: design by Jim VagnerBO-01BO053 -
Down Under Knives - Kookaburra Throwing Knives DUK-KB - Throwing Knives
Set of two throwing knives with sheath
Intended use: Throwing / Outdoor
Type of production: Industrial
Blade production: Taiwan
Blade: 440C stainless steel - 52HRC
Handle: Leather
Blade length: 170mm.
Blade thickness: 6mm.
Total length: 305mm.
Weight: 358g.
Sheath: Leather, crocodile-like
Packaging: Cardboard box with Down Under logosL446017 -
Down Under Knives - Red Rock Raptor Kukri Machete - L446026 - knife
Intended use: Kukri/Heavy Utility
Type of production: Industrial
Blade production: Taiwan
Blade: 440C stainless steel with differential tempering 59/46HRC
Blade Treatment: Mirror polishing
Handle: Brass and leather rings
Blade length: 260mm.
Blade thickness: 5.5mm.
Total length: 395mm.
Weight: 690g.
Sheath: Leather, reptile-likePackaging: Cardboard box with Down Under logos and warranty certificates
L446026 -
Down Under Knives - The Outback Bowie - knife - L446028
Intended use: Hunting / Outdoor
Type of production: Industrial
Production Blade: Taiwan
Blade: 440C stainless steel hardened differentiated 58/45HRC
Treatment Blade: Mirror polishing
Handle: Brass, ebony wood and leather rings
Blade length: 280mm.
Blade thickness: 6mm.
Total length: 405mm.
Weight: 800g.
Sheath: In leather, crocodile-like
Packaging: cardboard box with logos Down Under, sharpener for sharpening
Notes: The outback is a clear homage to the knife used by Paul Hogan in Crocodile Dundee movie, in fact faithfully reproduces the shape, size and material as the one used for filming.L446128 -
Boker Plus - Jim Wagner Reality-Based Tanto Blade - PRIVATE COLLECTION - 01BO051
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Commercially available: No since 2014
* Sharpening: Original
* Marks on blade: No
* Marks on handle: No
* Box: NOT present
* Checked and certified by our internal laboratory
Type of production: industrial
Blade: 440C 58HRC stainless steel
Blade treatment: Teflon
Handle: FNR
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: -mm.
Total length: 230mm.
Balancing: -
Weight: 168g.
Closure: Back Lock
Clip: stainless steel
Sheath: -
Notes: design by Jim VagnerBO-01BO051 -
Boker - Annual Damascus 1991 Knife - Limited Edition - PRIVATE COLLECTION - Knife
The Böker Annual Damascus 1991 knife is not just a tool, but a true investment of value, a treasure destined not only for knife lovers but for anyone who appreciates the art and tradition behind such a sought-after object.
This limited piece, part of a private collection and now out of production, represents a unique specimen, numbered and limited to only 999 pieces worldwide.
WITHDRAWN FROM PRIVATE COLLECTION
- Type: Previously Purchased
- Condition: As good as new
- Available in the market: Out of production, numbered and limited to 999 specimens
- Sharpening: Factory sharpening
- Blade marks: No
- Handle marks: No
- Box: Present
- Sheath: Not applicable
- Manuals, Certificates, and Warranties: Present
- Checked and Certified by our internal laboratory
Use Destination: EDC/Gentleman/Collection
Type of production: Industrial
Country of production: Germany - Solingen
Blade: in 300-layer artisanal Damascus steel
Handle: stabilized root wood
Blade length: 80mm
Blade thickness: 2mm
Total length: 186mm
Weight: 136g
Closure: back lock
Packaging: Wooden box with paper certificate and warranty
Note: numbered and limited specimen, as good as new, withdrawn from private collection
BO-1991DC -
Down Under Knives - The Outback Bowie Eclipse Version - DUK-EC - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in good condition, aesthetically marked by some oxidation marks on the blade, guard and pommel; the scabbard leather is also somewhat marked
* Commercially available: Currently in production
* Sharpening: Factory.
* Marks on blade: various oxidation marks.
* Marks on handle: None
* Box: Present and complete with accessories.
* Scabbard: Present
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory
Intended Use: Hunting / OutdoorProduction Type: Industrial
Country of Production: Taiwan
Blade: Made of 1095 carbon steel at 58/59HRC
Blade Treatment: mirror polish
Handle: brass and leather rings
Blade length: 280mm.
Blade thickness: 6mm.
Total length: 405mm.
Weight: 800g.
Scabbard: Black leather
Packaging: cardboard box with Down Under logos, sharpening steel
Notes: the Outback is a clear homage to the knife used by Paul Hogan in the Mr. Crocodile Dundee movies, in fact it faithfully traces its shape and dimensions. - Eclipse version in carbon steel (it is recommended to keep it oiled and stored outside the leather sheath) - Previously purchased knife, from a private collectionL446228-CP -
Strider Knives - Fixed Tanto Tiger Stripe knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Early 2000s knife, previously purchased.
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Factory.
* Marks on blade: Small abrasions given by being placed in Kydex sheath.
* Marks on handle: None
* Box: -
* Scabbard: Present
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: TacticalProduction type: MidTech
Country of Production: USA
Blade: full tang stainless steel CPM-S30V
Finish: Tiger Stripe
Handle: Paracord
Blade length: 100mm.
Blade thickness: 4.5mm.
Total length: 195mm.
Weight: 125g.
Sheath: thermoformed kydex, with Tek-Lok multi-position attachment
Notes: previously purchased knife, from private collectionST-FTTS-CP -
Dietmar Kressler - Integral Drop Point - K190 & Snakewood - PRIVATE COLLECTION - craft knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 1989 model, in like-new condition.
* Commercially available: Unique specimen, entirely handmade
* Sharpening: Factory sharpened.
* Marks on blade: None
* Marks on handle: None
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks of time.
* Manuals, Certificates and Warranties: Warranty certificate issued by the Italian dealer of the time, not stamped or signed.
* Checked and Certified by our in-house laboratoryIntended Use: Collection/Gentleman
Type of production: Handcrafted
Country of Production: Germany
Blade: Bohler K190 powder steel at 62HRC
Blade finish: horizontal satin finish
Handle: integral, from solid, with snakewood grips
Blade length: 83mm
Blade thickness: 4mm.
Total length: 187mm.
Weight: 139g.
Sheath: leather, belt
Packaging: -
Notes: rare handcrafted knife made in 1989 by renowned German cutler Dietmar KresslerFC-KRES-SW-CP -
Sog - S37 Seal 2000 knife - Made in Japan - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: -
* Scabbard: Present - Original
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory.
The SEAL Team 2000 was designed in collaboration with the Navy SEALs themselves to meet their specific needs in the field. It was introduced in 2001 and quickly became a popular knife among law enforcement professionals, military personnel and tactical knife enthusiasts.
The SOG SEAL Team 2000 Knife was created to withstand the most extreme conditions and challenges in the field, making it a reliable tool for those operating in tactical environments. Its popularity has grown over time due to its reputation as a quality knife built to last and adapt to a variety of situations.
Intended Use: Sporting/Collection
Type of production: Industrial
Blade production: Japan
Blade: AUS-6 stainless steel
Blade Finish: Powder coated
Handle: Zytel
Blade length: 180mm.
Blade thickness: 6mm.
Total length: 315mm.
Balance: on the guard branch
Weight: 359g.
Sheath: made of kydexSOG-S37SEAL-CP -
Microtech - Currahee - S/E Green 102-1GR - PRE-OWNED - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: January 2014 production, previously purchased.
* Condition: Brand new
* Commercially available: Discontinued and no longer available.
* Sharpening: Factory.
* Marks on blade: No
* Marks on handle: Small abrasions given by contact with scabbard.
* Box: Present and original
* Scabbard: Present and original
* Manuals, Certificates and Warranties: Warranty and maintenance sheet.
* Checked and Certified by our in-house laboratory
Intended Use: Heavy Utility
Production type: Midtech
Country of Production: USA
Blade: full tang in D2 steel at 59/60HRC
Blade treatment: Gunkote Green
Handle: polymer
Blade length: 115mm.
Blade thickness: 5.2mm.
Total length: 250mm.
Balance: advanced
Weight: 370g.
Sheath: polymer, with M.O.L.L.E. compatible multi-position attachments.
Packaging: cardboard box with Microtech logos, Maintenance and warranty information
Notes: produced in January 2014 - previously purchased - brand newMCT1021GR -
ExtremaRatio - Dobermann II Miles - Full Set first series 2004 - PRE-OWNED - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased, 2004 first series.
* Condition: Perfect, like new
* Commercially available Out of production, replaced by the new versions.
* Sharpening: Factory sharpened, perfect
* Marks on blade: None
* Marks on handle: None
* Box: Present and perfect
* Scabbard: Present and perfect
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / Collection
Type of Production: Industrial
Country of Production: Italy
Blade: stainless steel N690Co
Blade finish: tumbling "Miles"
Handle: Forprene
Blade length: 170mm.
Blade thickness: 6.3mm.
Total length: 315mm.
Weight: 254g.
Sheath: ballistic rubber
Packaging: cardboard box with Extrema Ratio logos
Notes: 2004 first series specimen, with hexagonal hardware, supplied with original box all in like-new condition.ER-DOB-MICP -
Al-Mar - Hawk - Iron Wood 1002 Full Set - PRIVATE COLLECTION - Vintage knife
KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very good condition, close to new
* Commercially available: Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Some small hairline on heads and metal insert
* Box: Present - Original
* Scabbard: Present - Original
* Manuals, Certificates and Warranties: - - Original
* Checked and certified by our in-house laboratory
Intended Use: Gentleman / Collection
Production type: Industrial
Country of manufacture: Seki - Japan
Blade: AM-6 stainless steel
Blade treatment: satin finish
Handle: iron wood, nickel silver insert, stainless steel heads and brass folders
Blade length: 64mm.
Blade thickness: 2mm.
Length closed: 85mm.
Total length: 147mm.
Weight: 53g.
Closure: Back Lock
Sheath: Nylon, with belt loop and Velcro closure
Packaging: Cardboard box with Al Mar logos
Notes: Previously purchased - Near mint condition - Full SetAM-1002CP -
Al-Mar - SERE Attack 3003/B - PRIVATE COLLECTION - vintage knife
Rare knife produced by the Japanese Al-Mar in the late 80s and early 90s, now out of production and no longer available. Knife withdrawn from private collection and out of production - Knife slightly used, with small shallow marks on the left side of the blade, original leather sheath never used and never worn, including box (not original). The rubber grip has a slight break, with a small missing part, in the upper right rear part, near the corrugation. - Checked, re-sharpened and certified by our internal Collini Cutlery laboratory.
Intended use: Collection / Tactical
Type of production: Industriae
Country of production: Japan, Seki
Blade: AM-6 stainless steel
Blade treatment: satin finish
Handle: in rubber, with brass spacers
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 150mm
Total length: 255mm.
Weight: 320g.
Closing: Back Lock
Sheath: leather, new
Packaging: cardboard box, with Japanese logos, but not original Al-Mar
Notes: withdrawn from private collection - used - re-sharpened - with "DEOPPRESSOLIBER" logo on the left headAM-3002DOL -
Livio Montagna - Fighter Knife - N690 and Stabilized Alder - PRIVATE COLLECTION - custom made knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available No.
* Sharpening: Original
* Marks on blade: NO
* Marks on handle: NO
* Packaging: NO
* Scabbard: Leather, handcrafted
* Manuals, Certificates and Warranties: YES
* Checked and Certified by our in-house laboratory
Intended use: collection / fighter
Production type: handmade
Country of production: Italy
Blade: steel N690Co 59/60 HRC
Blade finish: satin finish
Handle: stabilized alder wood with 416 stainless steel through-guard and screw pins
Blade length: 123mm.
Blade thickness: 4mm.
Total length: 232mm.
Weight: 212g.
Sheath: handcrafted, made of ostrich paw and leather, hand-stitched
Packaging: -
Notes: Previously purchased, like new - Knife handcrafted by Livio Montagna, accredited member C.IC. (Italian Knifemakers Guild).AP-FIGH-ON -
Livio Montagna - Tactical Bowie - PRIVATE COLLECTION - handcrafted knife
KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No
* Sharpening: Original
* Marks on blade: NO
* Marks on handle: NO
* Packaging: NO
* Scabbard: Leather, handcrafted, original with some small marks due to age and storage
* Manuals, Certificates and Warranties: YES
* Checked and Certified by our in-house laboratoryKnife handcrafted by Accredited Member C.IC. (Italian Guild of Cutlery Makers) Livio Montagna. Reproduction inspired by one of the most iconic knives of all time (the Bowie), but with a more "tactical" touch for the blade; the deer handle and leather rings are left to recall the classicism of the model.
Intended use: hunting / collection
Type of production: artisan
Country of production: Italy
Blade: hardened 440C steel at 59/60 HRC
Blade finish: satin finish
Handle: Deer and Leather Rings - brass guard
Blade length: 205mm.
Blade thickness: 5mm.
Total length: 340mm.
Weight: 390g. (519g. including scabbard)
Sheath: Handcrafted, leather, hand-stitched
Packaging: NO
Notes: -AP-MONT-TAC-BOWIE -
Ka-Bar - Vintage '80s - USMC Fighting Knife - 1217 - USATO - coltello
COLTELLO USATO, RITIRATO DA COLLEZIONE PRIVATA
* Tipologia: Produzione degli anni 80 (presumibilmente 1984/1986), precedentemente acquistato ed etilizzato
* Condizioni: Globalmente in buone condizioni
* Reperibile in commercio: Attualmente in produzione, con differenti finiture del cuoio
* Affilatura: Riaffilato professionalmente
* Segni su lama: Diversi segni di usura che conferiscono carattere e non ne limitano la funzionalità
* Segni su impugnatura: Segni di usura su guardia e pomolo, cuoio del manico in buono stato
* Scatola: Assente
* Fodero: Assente
* Manuali, Certificati e Garanzie: No
* Controllato e Certificato dal nostro laboratorio internoIl KA-BAR USMC è considerato uno tra i più famosi coltelli al mondo. Venne originariamente ideato per le truppe degli Stati Uniti nella Seconda Guerra Mondiale e da allora la sua efficacia è stata universalmente riconosciuta e impiegata in tanti altri scenari militari.
Destinazione d'uso: Tattico/Militare
Lama: in acciaio al carbonio 1095 56/58HRC
Manicatura: anelli di cuoio
Lunghezza lama: 180mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 305mm.
Bilanciatura: arretrata - 1 cm. dal ramo di guardia inferiore
Peso: 305g.
Fodero: in cuoio
Note: Produzione degli anni 80 (presumibilmente 1984/1986), precedentemente acquistato ed etilizzatoKB-US1217CP -
Boker - Bud Nealy MCS Cocobolo Knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like New
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present - Original
* Scabbard: Present - Original, with all accessories included.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / Neck Knife / CQD
Country of Production: Germany
Blade: full tang in 440C 58/60HRC stainless steel
Handle: cocobolo wood
Blade length: 85mm.
Blade thickness: 3mm.
Total length: 185mm.
Balance: Backward
Weight: 90g.
Clip: MCS2 System that allows 9 different carry options, all explained in the manual
Sheath: Ultra flat Kydex sheath with additional magnetic retention
Notes: knife withdrawn from private collection, like new
Biographical Note:
Bud Nealy is universally recognized as one of the best knifemakers in the world. He is also known as the inventor of the MCS (Multi Concealment Sheath) system that allows the knife to be placed securely in any type of position. And it is because of these two requirements that every day hundreds of his MCS systems are used by police officers, undercover agents, S.W.A.T. and R.A.I.D. members, U.S. embassy guards, Bodyguards and Air Rangers.BO-BNMCS-CP -
Livio Montagna - Tribute BayleyKnife S4 Bear Grylls Survival - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like New
* Commercially available No.
* Sharpening: Original
* Marks on blade: NO
* Marks on handle: NO
* Packaging: NO
* Scabbard: Leather, handcrafted and hand-stitched
* Manuals, Certificates and Warranties: YES
* Checked and Certified by our in-house laboratory
Knife handcrafted by Accredited Member C.I.C. (Corporazione Italiana Coltellinai) Livio Montagna.
Intended use: bushcraft / utility
Type of production: handcrafted
Country of manufacture: Italy
Blade: RWL34 steel
Blade finish: satin-finished
Handle: micarta with 416 stainless steel cotter
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 210mm.
Weight: 230g.
Scabbard: handcrafted, leather, hand-stitched
Packaging: unwrapped, comes with certificate of authenticity and warranty
Notes: previously purchased knife, from a private collection, "homage" to the Bayley S4 knife, designed and handcrafted by Rob Bailey, famous for being used by Bear Grylls during his first TV appearances, before he made business deals with Gerber.AP-BAYS4-LM -
Livio Montagna - Hunter knife - M390 - Stabilized Beech - PRIVATE COLLECTION - handmade knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available No
* Sharpening: Original
* Marks on blade: NO
* Markings on handle: NO
* Packaging: NO
* Sheath: In leather, handcrafted
* Manuals, Certificates and Warranties: YES
* Checked and Certified by our internal laboratoryKnife handcrafted by Master C.IC. (Italian Corporation of Cutlers) Livio Montagna.
Type of production: artisanal
Country of production: Italy
Blade: M390 steel at 60/61 HRC
Blade finish: satin finish
Handle: in stabilized beech wood
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 215mm.
Weight: 185g.
Sheath: handmade, in leather, hand-stitched
Packaging: NO
Note: -AP-HUNTER-FA -
Harold Corby - '80 Vintage Small Micarta Fighter - PRIVATE COLLECTION - custom knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased from Lorenzi's cutlery shop in Milan, via Monte Napoleone, presumably in the 1980s.
* Condition: In good condition
* Commercially available: the craftsman long ago stopped making knives.
* Sharpening: Factory original, can be improved, with some cosmetic abrasion
* Marks on blade: Small marks and slight hairlines also on the through-guard.
* Marks on handle: A few small marks.
* Packaging: absent
* Scabbard: Leather, handcrafted, original, stamped "Coltelleria Lorenzi," with marks given by use and time
* Manuals, Certificates and Warranties: absent.
* Checked and Certified by our in-house laboratory
Intended use: collection/tactical
Type of production: handcrafted
Country of manufacture: USA
Blade: full tang stainless steel, steel composition not stated (presumably RWL34 or 440C)
Blade finish: mirror polish
Handle: nickel silver through-guard and brown micarta grips, with red spacers
Blade length: 97mm.
Blade thickness: 4mm.
Total length: 202mm.
Weight: 97g.
Sheath: handcrafted, leather, with stainless steel back clip
Packaging: -
Notes: Specimen presumably from the 1980s, previously purchased knife, from a private collectionAP-CORBY -
Fox - Spartan Defender Combat Knife - SF-CC03 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: knife from 2014 previously purchased and used.
* Condition: Overall in good condition.
* Commercially available Out of production.
* Sharpening: Professionally re-sharpened.
* Marks on blade: Slight superficial rub marks on matte finish.
* Marks on handle: Small superficial marks on pommel and guard.
* Box: Not present
* Scabbard: Present, original, fiberglass, nylon and cordura sheath with stainless steel thread cutter.
* Manuals, Certificates and Warranties: Not present
* Checked and Certified by our in-house laboratory
Knife launched on the market in 2014 by Fox Knives, civilian version of their Spartan Defender Military Bayonet. It has the distinction of having a trapezoidal polymer handle with the blade offset upward from the user's grip. Model now discontinued and replaced by the "Spartan 2 Leonidas" currently in production, decidedly more canonical in appearance, conformation and materials.
Intended Use: Collection / All Round Utility / Tactical
Country of Production: Italy
Blade: Stainless Steel N690Co 59/60HRC with MILSPEC MIL-C-13924 treatment
Handle: NATO Black 9011 forprene and 316L stainless steel with MILSPEC MIL-C-13927 treatment
Blade length: 185mm.
Blade thickness: 6mm.
Total length: 315mm.
Balance: On the lower guard branch
Weight: 390g.
Sheath: made of high-strength fiberglass with Cordura and ballistic Nylon exterior. The main sheath is equipped with a wire cutter plate.
Notes: knife from 2014 previously purchased and from private collection - discontinued itemSF-CC03-AP -
Camillus - 1985 Vintage Air Force Pilot Survival - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used.
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Professionally re-sharpened.
* Marks on blade: various marks given by time and use.
* Marks on handle: normal signs of time.
* Box: not present
* Scabbard: present, original, leather, with signs of time.
* Manuals, Certificates and Warranties: not present.
* Checked and Certified by our in-house laboratory.
Created as a cutting tool and emergency instrument for U.S.A.F. pilots, the Camillus Pilot has managed to win a solid reputation worldwide for both its legendary sturdiness and its successful and attractive aesthetics.
Intended Use: Collection/Tactical
Type of production: Industrial
Country of manufacture: USA
Blade: hidden tang, made of 1095 carbon steel
Blade finish: epoxy powder
Handle: pressed leather rings
Blade length: 130mm.
Blade thickness: 5mm.
Total length: 243mm.
Weight: 255g.
Sheath: leather
Packaging: -
Notes: 1985 knife withdrawn from private collectionAP-CPILOT -
Boker - Applegate Fairbairn Combat Single Edge - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Professionally restored.
* Marks on blade: light
* Marks on handle: /
* Box: not present
* Scabbard: Original, Nylon, in very good condition.
* Manuals, Certificates and Warranties: not present.
* Checked and Certified by our in-house laboratory.
The design of this legendary knife was born out of the meeting of a former soldier and bodyguard to President Roosevelt, Rex Applegate, and William Ewart Fairbairn, who, together with Edward Anthony Sykes, had given birth to the progenitor of modern military fighters: the Fairbairn-Sykes that accompanied the British Commandos during World War II. In defining the forms of the new knife, the two started from the very limitations that had emerged from the wartime use of the Fairbairn-Sykes, particularly fragility, limited utility in cutting use, and the tendency of the round-section handle to rotate in the hand.
Intended Use: Tactical/Collection
Type of production: Industrial
Country of manufacture: Germany
Blade: 440C stainless steel
Blade finish: matte finish, anti-reflective
Handle: made of Delrin (thermoplastic material)
Blade length: 150mm.
Blade thickness: 4.4mm.
Total length: 278mm.
Weight: 238g.
Sheath: made of Nylon, for belt, for vertical carry
Packaging: absent
Notes: single edge knife - Previously purchased knife, from private collectionBO-AFCKS-CP -
Livio Montagna - Medium Bowie - PRIVATE COLLECTION - handcrafted knife
KNIFE FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No
* Sharpening: Original
* Marks on blade: NO
* Marks on handle: NO
* Packaging: NO
* Scabbard: Leather, handcrafted, original with some marks due to age and storage
* Manuals, Certificates and Warranties: YES
* Checked and Certified by our in-house laboratory
Knife handcrafted by Master C.IC. (Corporazione Italiana Coltellinai - Italian Knife-makers Guild) Livio Montagna. Excellent reproduction of one of the most iconic knives ever: the classic Bowie. A knife created by Rezin Bowie in the early 19th century for his brother Jim Bowie, the famous American pioneer whose rather reckless life is now shrouded in legend.Livio Montagna's excellent craftsmanship does justice to this piece of history with its classic and timeless stylistic features: the double guard, the clip point blade, the handle in natural material.
Intended use: hunting / collection
Type of production: handcrafted
Country of production: Italy
Blade: steel 440C tempered at 59/60 HRC
Blade finish: satin finish
Handle: Deer and Buffalo - brass guard and pommel
Blade length: 197mm.
Blade thickness: 5.7mm.
Total length: 314mm.
Weight: 497g. (666g. including scabbard)
Sheath: Handcrafted, leather, hand-stitched
Packaging: NO
Notes: -AP-MONT-BOWIE -
Livio Montagna - Arkansas Toothpick - PRIVATE COLLECTION - handcrafted knife
KNIFE FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Good
* Commercially available No
* Sharpening: Original
* Marks on the blade: Some scratches on the pommel, blade and guard in very good condition
* Marks on handle: Some assembly inaccuracies near the pommel, adhesive residues
* Packaging: NO
* Scabbard: Leather, handcrafted, original with some marks due to age and storage
* Manuals, Certificates and Warranties: YES
* Checked and certified by our in-house laboratory
Knife handcrafted by Master C.IC. (Corporazione Italiana Coltellinai - Italian Knife-makers Guild) Livio Montagna. Reproduction of one of the various versions of the Arkansas Toothpick, legendary frontier knife of the American 1800s. Famous, often infamous, it generally has a 30 to 50 cm blade, rather narrow and sometimes symmetrical, dagger-style. Used mainly for hunting and personal defence.Livio Montagna's version is aesthetically very similar to the Toothpick used in Expandables 2.
The knife is distinguished by an excellent overall balance, allowing control and precision in use. The finish is of a good standard.
Intended use: hunting / collection
Type of production: handcrafted
Country of production: Italy
Blade: hardened 440C steel at 58/59 HRC
Blade finish: satin finish
Handle: Ebony - 416 stainless steel guard and pommel
Blade length: 305mm.
Blade thickness: 6mm.
Total length: 445mm.
Weight: 722g. (960g. including scabbard)
Sheath: Handcrafted, leather, hand-stitched
Packaging: NO
Notes: -AP-MONT-PICK -
Boker - Magnum Collection 2005 - Limited Edition - 02MAG2005 - PRIVATE COLLECTION - knife
KNIFE FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition
* Commercially available Out of production
* Sharpening: Factory
* Marks on blade: light
* Marks on handle: light, on the guard
* Box: Original, with some marks
* Scabbard: Original, leather, with some small marks, also due to the insertion of the knife
* Manuals, Certificates and Warranties: Certificate present
* Checked and certified by our in-house laboratoryThis limited edition Magnum Tanto style piece is based on a historical Japanese samurai sword that was popular during the Heian period (794-1185). The modified dagger-style blade, based on a design by the legendary blacksmith Amakumi, refers to the period when samurai lived the 'bushido' or 'way of the warrior'. The shape of this blade is called Kissagi-moroha and is derived from the Kogarasu-maru sword. The material of the blade is 440A stainless steel with a rich two-tone finish. The traditional handle is combined with synthetic material simulating tsuka and ray skin; the Tsuba provides a secure grip. Supplied with a genuine leather sheath and presentation box. Limited to 1,999 pieces worldwide, each serialised.
Intended use: Collection / Utility
Production type: Industrial
Country of manufacture: Taiwan
Blade: Ful tang in 440A steel
Blade finish: satin finish/polishing
Handle: canvas and synthetic ray skin
Blade length: 180mm.
Blade thickness: 5mm.
Total length: 300mm.
Weight: 271g.
Sheath: black leather
Packaging: case with certificate of guarantee
Notes: Numbered and limited edition of 1999 pieces - Serial Number 136AP-BO-02MAG2005 -
Puma - Jagdmesser Falknersheil - Falconer's Knife - 3592 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Factory sharpened, improvable
* Marks on blade: No
* Marks on handle: Slight, on nickel silver heads.
* Box: Absent
* Scabbard: Original, leather, with a few small marks due to age.
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory
Particular knife developed with the help of experienced falconers and especially Horst Niesters in the early 1970s.
The blade was designed to chop up food for raptors and to intercept game brought back by raptors during hunting trips. In the center of the blade is a small semicircular notch that serves to signal to the falconer that the edge is sharp from the tip of the blade to that exact point; the rest of the blade is kept blunt to protect the raptors.
PUMA's falconer's knife is designed to be very handy and absolutely practical, making it a reliable companion for hunting prey.
Intended Use: Collection / Vintage / Hunting
Type of production: semi-crafted
Country of manufacture: Germany
Blade: 440C stainless steel
Blade finish: satin-finished
Handle: wooden, with nickel silver guard and pommel
Blade length: 125mm.
Blade thickness: 3mm.
Total length: 242mm.
Balance: backward
Weight: 130g.
Sheath: leather
Packaging: -
Notes: Vintage 1970s knife - Withdrawn from private collection - Overall in very good conditionPU-FALK-CP -
Rudy Ruana Knives - Vintage Sticker Stag Horn - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably from the late 1970s/early 1980s.
* Condition: In very good condition
* Commercially available: Rudy Ruana passed away in 1986, Ruana knives are still in production and orderable on their site with waiting lists, but in different configurations from this one.
* Sharpening: Factory original, improvable, with some cosmetic abrasion.
* Marks on blade: Small horizontal marks due to insertion and removal from scabbard.
* Marks on handle: A few small marks on the aluminum handle.
* Packaging: -
* Scabbard: Leather, handcrafted, original, with a few small marks given by age.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended use: hunting / light hiking
Type of production: handcrafted
Country of production: USA
Blade: made of undeclared high carbon steel (presumably 1095 or 5160), hammer-forged, ground, individually oil-hardened and heat-treated using a zone tempering method that makes the back and tang of the blade softer than the cutting edge
Blade finish: satin-finished
Handle: cast aluminum directly on tang with beveled and riveted elk horn inserts. The tang runs inside the full length of the handle, and the cast aluminum produces a strong handle that is impossible to break.
Blade length: 125mm.
Blade thickness: 4.5mm.
Total length: 235mm.
Weight: 190g.
Sheath: handcrafted, leather, for vertical carrying on the belt
Packaging: -
Notes: Specimen presumably late 1970s/early 1980s in excellent condition - previously purchased knife from a private collection
Company History.
In 1938, Rudy Ruana began making knives in a small store in Montana. Members of his family continue to this day to handcraft Ruana knives in the same store. In 1964 Ruana's son-in-law, Vic Hangas, left a job with a telephone company and put his artistic talents to good use, joining Ruana in the business. Hangas' son Mark began working in the business in 1976. In 1983, Ruana retired at the age of 80 and sold the business to the Hangas family. In 1984 Mike Hangas joined his brother and father and the company was incorporated. Rudy Ruana died in April 1986. He was honored with posthumous induction into the American Bladesmith Society's Hall of Fame in 1997 and Blade magazine's Cutlery Hall of Fame in 2002.
Ruana knives are still handmade in the small Montana store where Rudy Ruana began forging blades more than 80 years ago. In an era of outsourcing and diminishing Made in America products, Ruana knives are still handmade in the United States, with a focus on quality rather than quantity. Although some things have changed over the years, still using the same methods and much of the same equipment used by Rudy Ruana.AP-RUAST -
Randall Made Knives - Vintage Model 7-4 1/2 Fisherman Hunter - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably from the late 1970s/early 1980s.
* Condition: In very good condition
* Commercially available On order, with waiting list.
* Sharpening: Factory original, can be improved.
* Marks on blade: Small horizontal marks due to insertion and removal from scabbard.
* Marks on handle: A few small marks on aluminum tang.
* Packaging: -
* Scabbard: Leather, handcrafted, original.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended use: hunting / fishing / light hiking
Type of production: handcrafted
Country of production: USA
Blade: O1 steel
Blade finish: satin finish
Handle: leather rings, brass guard, duralumin pommel
Blade length: 115mm.
Blade thickness: 3.8mm.
Total length: 230mm.
Weight: 130g.
Scabbard: handmade, leather, for vertical carrying on belt
Packaging: -
Notes: Specimen presumably late 1970s/early 1980s in excellent condition - previously purchased knife from a private collection
History of the Model
The Model 7 was designed as a scaled-down version of the Model 3 Hunter.
Almost immediately, the idea of a scaled-down version of the new Hunter dawned on Bo Randall as an ideal knife for his fellow anglers. An avid fisherman since his youth, Bo regarded this new knife as a labor of love and immediately set to work on the project. At first he tried 4- and 4.5-inch blades, but then opted for the 4 1/2-inch one. Bo wanted the right handle for cleaning brook trout and similar sized fish, so he reduced the size of the handle of the new Hunter and changed its shape. Naturally, he called this model the "Fisherman," and some early prototypes with 4-inch blades were delivered to some dealers during the latter part of September 1945.AP-RAND7-4V -
Strider Knives - 2010 Tiger Stripe BG Gunner Grip Black G10 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued; Company no longer in operation as of 2017.
* Sharpening: Factory.
* Marks on blade: Normal marks, found on all Strider models with Tiger Stripe finish.
* Marks on handle: None
* Box: Originally sold unboxed
* Scabbard: Original, in Khaki-colored Cordura, by Eagle USA.
* Manuals, Certificates and Warranties:Originally sold without certificates or warranties.
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / Collection
Type of manufacture:Midtech
Country of Production: USA
Blade: Stainless steel CPM-S30V
Blade Finish: Tiger Stripe
Handle: Black G-10 with GG (Gunner Grip) pattern
Blade length: 160mm.
Blade thickness: 6.3mm.
Total length: 298mm.
Weight: 353g.
Sheath: Khaki, cordura, by Eagle USA
Packaging: -
Notes: 2010 specimen in very good condition - Shows small scuff marks on the Tiger Stripe finish, which is common with any Strider model made with this matte blade finish - Strider knives have always been offered by the company without any box, packaging, manual or certificate - This historic company ceased operations in 2017, after a 25-year career - Mick Strider, the company's previous founding partner, is still in business and dedicated solely to making custom knives.AP-ST-BG-GG -
RKP - Tunturi Puukko - COLLEZIONE PRIVATA - Knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in fair condition, marks on the blade due to use and years since its production
* Commercially available: no longer in production, difficult to find, probably dating back to the 1980s or 1990s
* Sharpening: not original, the knife has been used and resharpened
* Marks on the blade: scratches, logo a little discoloured, dots due to cleaned oxidation
* Marks on the handle: yes, due to use and insertion in the sheath
* Box: unboxed
* Scabbard: original, leather and fur (presumably reindeer)
* Manuals, Certificates and Warranties: absent
* Checked and certified by our in-house laboratoryIntended use: hunting/collecting
Type of production: handcrafted
Blade: Sandvik 12C27 stainless steel
Blade treatment: polishing
Country of manufacture: Finland
Handle: bone (presumably reindeer)
Blade length: 100mm
Blade thickness: 3mm
Length closed: -
Total length: 200mm
Balance: set back approx. 10mm
Weight: 82g (121g including scabbard)
Scabbard: leather with engravings
Notes: in view of the time that has elapsed and the difficulty of finding reliable production information, the above data are to be considered indicativeAP-RKP -
Jimmy Lile - 1989 Engraved Stag Skinner Model 2 - PRIVATE COLLECTION - handcrafted hunting knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available No, craftsman passed away in 1991.
* Sharpening: Factory original
* Marks on blade: None
* Marks on handle: None
* Packaging: Gift box marked "Coltelleria Lorenzi, via Montenapoleone, Milano"
* Scabbard: Leather, handcrafted, original
* Manuals, Certificates and Warranties: Certificate of guarantee and authenticity present.
* Checked and Certified by our in-house laboratory
Intended use: hunting / collection
Type of production: handcrafted
Country of production: USA
Blade: D2 steel
Blade finish: satin finish
Handle: deer Sambar, brass guard and pommel engraved by "J.S."
Blade length: 155mm.
Blade thickness: 4.5mm.
Total length: 273mm.
Weight: 340g.
Sheath: handcrafted, leather, for vertical carrying on belt
Packaging:Gift box marked "Coltelleria Lorenzi, via Montenapoleone, Milano," certificate of guarantee
Notes:1989 specimen designed and made entirely by hand by cutlery legend Jimmy Lile, famous to most for "inventing" and designing Rambo's knives, who died in 1991 - Previously purchased knife, from a private collection, like new.AP-LILE-SK2 -
Roberto Bernini - Fixed Hunter in Sambar Deer - PRIVATE COLLECTION - handcrafted hunting knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available On commission
* Sharpening: Factory.
* Marks on blade: A couple of imperceptible marks on the satin finish, presumably from being inserted in the scabbard
* Marks on handle: No.
* Packaging: Zip pouch, original
* Scabbard: Leather, handcrafted, original
* Manuals, Certificates and Warranties: Certificate of guarantee and authenticity present.
* Checked and Certified by our in-house laboratory
Intended use: hunting / collection
Type of production: handcrafted
Country of production: Italy
Blade: stainless steel ATS-34 60HRC
Blade finish: satin finish
Handle: deer Sambar with stainless steel 416 guard
Blade length: 87mm.
Blade thickness: 4mm.
Total length: 198mm.
Weight: 80g.
Sheath: handcrafted, leather, for vertical belt carry
Packaging: zippered case and certificate of authenticity and guarantee from the Corporazione Italiana Coltellinai
Notes: Designed and made entirely by hand in Italy by Master CIC Roberto Bernini, specimen dated November 2010 - Previously purchased, from private collectionAP-BER-HCV -
Davide Ceroni - Trinidad Scorpion Custom Bali - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available On order.
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Original packaging present
* Scabbard: Original scabbard present.
* Manuals, Certificates and Warranties: Certificate of Warranty and Authenticity present.
* Checked and Certified by our in-house laboratory
Intended use: sports/collection
Type of production: handcrafted
Country of production: Italy
Blade: stainless steel RWL-34 60HRC
Blade finish: dual tone (satin finish and microblading)
Handle: channel handles and titanium TI6AL4V inserts, ball bearing movement
Blade length: 115mm.
Blade thickness: 4mm.
Length closed: 147mm.
Total length: 256mm.
Weight: 120g.
Closure: -
Clip: -
Sheath: Black leather pouch
Packaging: Leather pouch with zipper and certificate of authenticity and warranty made of steel, laser engraved
Notes: Designed and made entirely by hand in Italy by Davide Ceroni - Previously purchased 09/12/2021 specimen from private collectionAP-CKTRSC -
Raidops - Soldier Spirit RD - K082 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Not present
* Scabbard: Original, like new
* Manuals, Certificates and Warranties: Not present
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / Allround Utility
Production type: Industrial
Country of Production: Taiwan
Blade: D2 57/59HRC carbon steel
Blade Finish: Blackwashed
Handle: G10
Blade length: 148mm.
Blade thickness: 6mm.
Total length: 285mm.
Balance: slightly backward
Weight: 433g.
Sheath: made of kydex, with Tek-Lok type attachment
Packaging: -
Notes: previously purchased knife, from private collectionAP-RAID-K082 -
Medford Knife and Tools - STA Sniper - Vulcan - OD Green - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition
* Commercially available -
* Sharpening: Factory
* Marks on blade: Slight, due to normal friction with the scabbard
* Marks on handle: No
* Box: Not present
* Scabbard: Kydex
* Manuals, Certificates and Warranties: NO
* Checked and certified by our internal laboratoryIntended Use: Tactical/Collection
Production Type: Semi Custom
Country of production: USA
Blade: D2 steel
Blade Treatment: Custom Flamed
Handle: G10 OD Green
Blade length: 128mm. (cutting edge 111mm.)
Blade thickness: 7mm.
Total length: 236mm.
Balance: slightly set back 2cm from the guard branch
Weight: 334g. (446g. with scabbard)
Sheath: kydex
Packaging: UNPACKED
Notes: -The STA Sniper blade was designed for a USMC scout/sniper and STA training group instructor in Phoenix, Arizona. Medford wanted to offer something completely unique to the Sniper's craft and his particular needs.
A clever design that utilises the integration of innovative tools with classic knife elements for a perfect blend of form and function. The 1/2" spanner in the handle fits almost any scope mounting system ring, the hilt screwdriver adjusts to turret adjustments, the measuring marks on the back are extremely convenient for both scouting and sniping, and the LTRE (Look Through Range Estimator) can significantly improve sight distance estimation up to 400 metres. The blade is extremely robust for field work and the compact size allows easy placement in any kit/equipment.
AP-MF-STA -
Chris Reeve - Ti-Lock Stone Washed - PRIVATE COLLECTION - folding knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Absent
* Scabbard: Absent
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory
The Ti-Lock mechanism was originally designed to isolate the locking mechanism from the handle of the knife so that it can offer greater freedom of design. Totally ambidextrous, the Ti-Lock is not meant to be a mere exercise in style, but should be understood as a mechanical innovation and a solid and reliable testament to the passion of Chris Reeve and Grant and Gavin Hawk.
Intended Use: Sporting/Collection
Type of production: Semi-manufactured
Country of Production: USA
Blade: CPM-S35VN 58/59HRC stainless steel
Blade Treatment: Stonewashed
Handle: Titanium 6AI4V Stone Washed
Blade Length: 82.5mm.
Blade Thickness: 3.2mm.
Length closed: 100mm.
Total length: 182.5mm.
Weight: 85g.
Closure: Ti-Lock titanium 6AI4V
Clip: Titanium 6AI4V
Packaging: -
Notes: Design by Grant and Gavin Hawk - Knife from a private collection.AP-0037SW -
Richartz Solingen - Multipurpose 6 uses - Christoforo Colombo 1492-1992 - Limited Edition - PRIVATE COLLECTION
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Conditions: in like new condition
* Commercially available: Out of production, model dating back to the 90s
* Sharpening: Factory
* Marks on blade: No
* Signs on handle: No
* Box: with original box in perfect condition
* Sheath: -
* Manuals, Certificates and Warranties: certificate with serial number
* Checked and Certified by our internal laboratory
Intended use: Collection / Vintage / MultipurposeType of production: artisanal
Country of production: Germany
Blade: stainless steel
Blade finish: satin finish
Handle: engraved wood
Blade length: 68mm.
Blade thickness: 2.0mm.
Total length: 155mm.
Balancing:
Weight: 130g.
Scabbard: -
Packaging: -
Notes: Vintage 90s knifeAP-RS-CC1992 -
Francesco Pachì - Winnebago custom knife - Ironwood and Fossil Ivory - PRIVATE COLLECTION
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Condition: in mint condition - year of manufacture 1997
* Sharpening: Factory
* Marks on blade: None
* Signs on handle: None
* Scabbard: Present - Original
* Manuals, Certificates and Warranties: without certificate
* Checked and Certified by our internal laboratoryIntended use: Collection
Type of production: Handcrafted unique piece by Francesco Pachì with Scrimshaw (wolf's head) by Mirella Pachì
Blade production: Italy
Blade: ATS-34 stainless steel
Handle: in desert ironwood with insert in mammoth fossil ivory with handcrafted scrimshaw depicting a wolf's head
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 235mm.
Weight: 215g.
Sheath: in handmade leather
Packaging: Pachì cordura pocket
Note:AP-WIN-FP -
Marttiini - Lapinleuku 120 Lapp knife 12cm - PRIVATE COLLECTION - Knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in excellent condition, it has some small marks on the blade from the years
* Available on the market: no longer in production, difficult to find, dating back to the 90s
* Sharpening: Original
* Marks on the blade: small scratches
* Marks on the handle: no
* Box: without box
* Sheath: in original brown leather
* Manuals, Certificates and Warranties: absent
* Checked and certified by our internal laboratoryIntended use: hunting
Intended use: collection
Type of production: artisanal
Blade: Sandvik 12C27 stainless steel
Blade treatment: mirror polishing with handcrafted engravings
Production Lama: Finland
Handle: birch burl
Blade length: 120mm
Blade thickness: 2.5mm
Closed Length: -
Total length: 235mm
Balancing: -
Weight: 150g
Closure: -
Clip: -
Sheath: leather sheath with handcrafted engravings
Note:MAR-LAPP12 -
Spyderco - 1994 Michael Walker Carbon Fiber - C22CF - PRIVATE COLLECTION - knife
Knife withdrawn from private collection, like new, with original case - Model "made in Switzerland" made in collaboration with Klotzli in 1994 in about 1,000 numbered examples on the blade (about 500 plain edge and about 500 partially serrated) based on a design by famous American designer Michael Walker. Knife that combines two qualities difficult to match, especially in those years; lightness and sturdiness. Elegant gentlemen, easy to open and close with one hand thanks to the Liner-Lock system, invented by Walker himself. Peculiarities of this very rare production are also the engravings on blade and clip made by excision and not by laser.
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Like new
* Commercially available Discontinued.
* Sharpening: Factory sharpened, perfect
* Marks on blade: no
* Marks on handle: no
* Box: Original leather pouch with zipper and spyderco logos.
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory
Intended use: sporting / collection
Type of production: industrial
Country of production: Switzerland
Blade: stainless steel ATS-34
Blade finish: Satin finish
Handle: carbon fiber with blue anodized titanium hardware
Blade length: 64mm.
Blade thickness: 2.4mm.
Length closed: 84mm.
Total length: 149mm.
Weight: 42g.
Closure: LinerLock in blue anodized titanium
Clip: blue anodized titanium
Notes: 1994 production, discontinued, numbered on blade (#625) - Design by Michael WalkerC22CF-CP -
SOG - The Tomcat knife - Large - PRIVATE COLLECTION - knife
The SOG Tomcat is one of SOG's largest folding knives. It features a 5mm thick blade, making it a heavy-duty folding knife, and while it weighs more than the average folding knife, it will withstand heavy use. The SOG Tomcat also won the "Overall Knife of the Year" award in 1988, one of the company's first awards, for its outstanding design.
It is one of the most collected SOG folding knives
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Conditions: Like new
* Commercially available: Out of production, in production between 1986 and 2002
* Sharpening: Factory
* Marks on blade: No
* Marks on the handle: No
* Box: Yes, original, in perfect condition
* Sheath: original in cordura
* Manuals, Certificates and Warranties: present in the package
* Checked and certified by our internal laboratoryIntended use: Collection
Type of production: Industrial
Production Lama: Japan
Blade: 440C stainless steel
Blade treatment: -
Handle: Stainless steel and Kraton
Blade length: 90mm.
Blade thickness: 4mm.
Closed length: 116mm.
Total length: 210mm.
Thick when closed: -
Balancing: -
Weight: 216g.
Closure: back-Lock
Clip: -
Sheath: Nylon
Packaging: Cardboard box with SOG logos
Note:AP-TOM-SOG -
Puma - Back Packer 465 knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Conditions: Like new
* Commercially available: Out of production, model dating back to the 90s
* Sharpening: Factory
* Marks on blade: No
* Marks on the handle: No
* Box: without box
* Sheath: -
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory
Intended use: Collection / VintageType of production: artisanal
Country of production: Germany
Blade: stainless steel
Blade finish: satin finish
Handle: ABS with metal parts
Blade length: 80mm.
Blade thickness: 2.5mm.
Total length: 185mm.
Balancing: backward
Weight: 130g.
Sheath: -
Packaging: -
Notes: Vintage 90s knifePU-BP465 -
Klotzli - 03-C Collection Series - Walker design - Titanium - PRIVATE COLLECTION - ATS-34 - knife
Knife withdrawn from a private collection, in like new condition with original box and certificate - Model dating back to the late 90s "made by Klotzli based on a design by the famous American designer Michael Walker. Knife that combines two qualities that are difficult to match, especially in those years; lightness and sturdiness Elegant gentleness, easy to open and close with one hand thanks to the Liner-Lock system invented by Walker himself.
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Available on the market Out of production
* Sharpening: Factory, perfect
* Marks on blade: No
* Marks on the handle: no
* Box: Present
* Sheath: in leather
* Manuals, Certificates and Warranties: Present
* Checked and certified by our internal laboratoryIntended use: sports / collection
Type of production: industrial
Country of production: Switzerland
Blade: ATS-34 stainless steel
Blade finish: Satin finish
Handle: Titanium
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 110mm.
Total length: 207mm.
Weight: 92g.
Closure: LinerLock
Clip: -
Notes: Design by Michael WalkerAP-KLO-03C -
Crusader Forge - VIS-T Tactical MK IV Titanium - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued
* Sharpening: Factory sharpened, perfect
* Marks on blade: No
* Marks on handle: Very small abrasion sengi on a couple of corners and on the clip.
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Collection/Tactical
Type of production: Midtech (semi-craft)
Country of manufacture: USA
Blade: stainless steel CPM-S30V/CF2 triple hardened 59/61HRC
Blade finish: Stone Washed
Handle: Titanium 6AL4V
Blade Length: 90mm.
Blade thickness: 5mm.
Length closed: 133mm.
Total length: 222mm.
Thickness when closed: 10.7mm.
Weight: 307g.
Closure: Frame Lock
Clip: Ttanium 6AL4V
Packaging: Cardboard box with Crusader Forge logos - certificate of guarantee and authenticity with knife data sheet
Notes: knife withdrawn from private collectionCF-VISTT-CP -
Fox - Parong Karambit - Olive Wood - FX-637OL - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available In production, but hard to find.
* Sharpening: Factory.
* Marks on blade: No
* Marks on handle: No
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory
Intended Use: Tactical/CQC
Production type: Industrial
Country of Production: Italy
Blade: Full tang in N690Co 58/60HRC steel
Blade finish: satin finish
Handle: olive wood
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 220mm.
Balance: backward
Weight: 200g.
Sheath: leather
Packaging: cardboard box with Fox logos
Notes: knife withdrawn from private collection - like newFX-637OL-CP -
Spyderco - Police knife Steel C07P - VG10 steel - PRIVATE COLLECTION - knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Rare model of the Police 2 - years 2002 - 2006
* Condition: in like new condition
* Commercially available: difficult to find
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: original Sog box
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory Coltelleria Collini
Intended use: Sports / CollectionType of production: Industrial
Production Lama: Japan
Blade: In VG10 stainless steel
Blade treatment: -
Handle: steel
Blade length: 100mm.
Blade thickness: 3mm.
Closed length: 135mm.
Total length: 235mm.
Thick when closed: 8mm
Balancing: -
Weight: 158g.
Closure: Back Lock
Clip: in stainless steel
Sheath: -
Packaging: without box
Note:SP-POL-07P -
Mission - MPK10-A2 Plain Edge - Navy Seal Knife - USED - Knife
Knife withdrawn from private collection - Used, but overall in good condition - An iconic, iconic knife from the first decade of the 2000s, tested and selected by the U.S. Navy Seals - The knife already when new presented itself with an average low level of finish and with a rough micropeened blade already very delicate and marked, this knife, used in the field by an Italian soldier in theaters of war, shows signs of cosmetic wear on both blade and sheath that do not affect its functionality in the slightest - Factory sharpening still in excellent condition - Original amphibious scabbard, in very good condition - No box - Checked and certified by our in-house laboratory.
Intended Use: Tactical / MultiroleType of Manufacture: industrial
Blade: A2 steel hardened to 57/58HRC
Country of Production: USA
Handle: made of Hytrel
Blade length: 140mm.
Blade thickness: 6.3mm.
Total length: 267mm.
Weight: 360g.
Sheath: amphibious, made of Hytrel
Packaging: without original packaging
Notes: used knife, withdrawn from private collection, overall in good conditionMI-MPK10-A2 -
Fantoni - Hide Fixed Premium by T. Rumici - 20Pcs. Limited Edition - PRIVATE COLLECTION - knife
Knife collected from a private collection - Never used, never taken out of its box, like new - Rare model produced by Fantoni in 2009 in a limited edition of only 20 pieces based on a design by Tommaso Rumici, one of his most famous and successful knives, still very modern and with an incredibly attractive design - Supplied with box, warranty certificate, sheath and replacement Ebony grips - Checked and certified by our in-house laboratory.
Intended Use: Collection / SportingCountry of manufacture: Italy
Type of production: industrial
Blade: stainless steel CPM-S30V 61-62HRC
Blade finish: satin-finished
Handle: made of micarta or ebony wood, interchangeable as desired (cheeks included in package)
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 170mm.
Balance: set back 1cm. from the lower guard branch
Weight: 68g.
Sheath: Made of kydex, with clip
Notes: Design by T. Rumici - Limited and numbered edition of only 20 pieces - Collected from private collection, like new.Link to the HIDE project page directly on the website of Designer Tommaso Rumici
FA-HIDE-CP20 -
ExtremaRatio - Fulcrum Knife Compact Geocamo - PRIVATE COLLECTION - knife
Knife withdrawn from private collection - Discontinued coloration - First series, with flat sheath - Overall in very good condition, with small marks on the blade due to insertion and removal of the knife from the sheath - Original factory sharpening in excellent condition, never used - Accompanied by original box and paper certificates and warranties - checked and certified by our in-house laboratory.
Intended Use: Tactical/SportingProduction type: Industrial
Country of Production: Italy
Blade: stainless steel N690Co
Finish: camouflage coating
Handle: Forprene
Blade length: 110mm.
Blade thickness: 6.3mm.
Total length: 210mm.
Balance: backward
Weight: 200g.
Sheath: rigid ABS with Tek-Lok attachment with automatic knife retention system.
Packaging: knife withdrawn from private collection globally in excellent conditionER-FUC-GEO-CP