Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Nitecore - NPP30 - Pocket Pouch Modular - Mini Nylon Organizer with Zip
Mini organizer made of water-repellent 500D Polyester consisting of a single zippered main compartment (for storing power bank, credit cards, headphones and cables). On the front side it offers 6 M.O.L.L.E. compatible modular webbing/attachments and on the back side it has an aluminum carabiner and a quick release webbing that allows to wear it on the belt or to tie it to other M.O.L.L.E. type webbing.
Material: 500D Water-repellent Polyester
Dimensions: 12.5cm x 7.5cm x 3cm
Carabiner: rear, aluminium
Loop: rear, belt loop, quick release, M.O.L.L.E. compatibleNI-NPP30 -
Nitecore - NPP20 - Pocket Pouch with Carabiner - Mini Nylon Organizer with Zip
Mini organizer made of 500D water-repellent Polyester consisting of a zippered main compartment (to store cell phones, power bank, headphones, keys and any other bulky gadget) with a small internal net to hold small products; two external side mesh compartments for quick access (for flashlights, cutters, folding knives, multipurpose tools).
Material: 500D water repellent polyester
Dimensions: 16cm x 9.5cm x 8cm
Carabiner: rear, aluminumNI-NPP20 -
Kasumi Japan - Sharpening stone - Grain 240/1000 - 80001 - knives accessories
The Kasumi 80001 combination whetstone with rough (240) and medium (1000) grit.
If your knife edge is in poor condition, start sharpening with the rough # 240 grit of the whetstone.
If your knife is in average condition, start with the # 1000 medium grit of the whetstone.
These two grits will keep your knives sharp enough for normal home use.
The whetstone comes with a hard rubber base for use when sharpening.
There is also a small abrasive stone to be used to grind the surface of the stone.
Dimensions:
length 175 x width 60 x height 25 mm - Weight: 635g.
Quality level: very highKJ80001 -
Nitecore - Aluminum Bolt Action Tactical Pen NTP31 - tactical pen
Elegant, tactical and indestructible aluminum pen, also useful as glass breakers and for personal defense with "sliding shutter" coupling system.
* Weight: 20g
* Total length: 133mm.
* Material: aluminum
* Diameter: 9.3mm.
* Glass breaker tip: tungsten steel
* Ink: black with Refill Schneider Gelion 39.NI-NTP31 -
Nitecore - NSH10 EDC Multiuse Titanium Snap Hook - carabiner - tool
NITECORE NSH10 is a multipurpose carabiner made of TC4 titanium alloy.
Inspired by the design of the carabiner used as essential tools for rock climbing or bungee jumping, the NSH10 is a reliable tool for fixing or hanging external objects. Comfortable and versatile, it can be used as a key ring, bottle opener, hanging hook or flathead screwdriver.
Type of production: industrial
Country of production: ChinaFunctions:
* keychain
* bottle opener
* hook
* open parcels
* flathead screwdriverMaterial: titanium
Length and width: 49mm x 25.5mm
Thickness: 3.8mm
Weight: 7.5gNI-NSH10 -
Nitecore - NTP21 - aluminum tactical pen
Elegant, tactical and indestructible titanium pen, useful also as crystal crystals and for personal defense.
* Weight: 25g
* Total length: 142mm.
* Material: aluminum alloy
* Diameter: 1.4 cm.
* Glass breakage tip: tungsten steel
* Ink: black with Fisher PR4 Refill Schneider Gelion 39.NI-NTP21 -
Nitecore - Titanium Tactical Pen NTP20 - tactical pen
Elegant, tactical and indestructible titanium pen, useful also as crystal crystals and for personal defense.
* Weight: 36g
* Total length: 142mm.
* Material: titanium
* Diameter: 1.4 cm.
* Glass breakage tip: tungsten steel
* Ink: black with Refill Schneider Gelion 39.NI-NTP20 -
Nitecore - Utility Pouch Black - NUP20 - Borsa a tracolla
Pratica borsa in Cordura, leggera e resistente, pensata per riporre e trasportare torce a LED, coltelli chiudibili, coltelli multiuso e pinze multiuso oltre a chiavi, portafogli, oggetti elettronici etc.
Utilizzabile sia a maniglia, che a tracolla, che tramite attacchi compatibili MOLLE. - Offre due capienti vani compartimentati chiusi indipendentemente con zip.
Caratteristiche e Materiali:- Cordura Nylon a 1000 denari resistente all'acqua e alle abrasioni con parti in velluto sintetico
- Trattamento esterno per tessuti che assicura resistenza allo sporco e facilita la manutenzione
- Pensata per un utilizzo quotidiano o per escursioni
- Tasche a scomparti per permettere l'alloggiamento di differenti utensili
- Interno morbido per proteggere gli utensili ospitati
- Elastici interni in Nylon per modulare al meglio gli utensili ospitati
- Operatività completa da ambidestro
- Sistemi posteriori di aggancio tipo MOLLE, in nylon ad alta resistenza
- Maniglia con grip rinforzato
- Tracolla in Nylon regolabile
- Pesa solamente 300g
- Comparto frontale di 17x15x2cm
- Comparto posteriore di 22x16x4cmNI-NUP20 -
Hoffner - Desert Folding knife 3.5" Black EOD - knife
Intended use: Tactical / CQC
type of production: Industrial
Blade: Stainless steel 440C
Blade treatment: -
Handle: G-10 Desert
Blade length: 90mm.
Blade thickness: 2.5mm.
closed length: 125mm.
Total length: 210mm.
thick when closed: -
Balancing: -
Weight: 148g.
Lock: Liner Lock
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with Hoffner logosfx-s3sbk-eod -
Chris Reeve - Large Sebenza - Classic 2000 Micarta + Leather Sheath - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition, with a few small marks due to time.
* Commercially available Discontinued
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: Small marks due to being placed in the scabbard and the passage of time.
* Box: Present and complete
* Scabbard: Present (not included at the time, but sold separately), original, brown leather, well maintained
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratoryIntended Use: Collection/Sportsman
Type of production: Handcrafted
Country of Production: USA
Blade: CPM-S30V 58/59HRC stainless steel
Handle: micro-bead-blasted titanium with Black Canvas Micarta inserts
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 207mm.
Thickness when closed: 17mm.
Weight: 125g.
Closure: Frame Lock
Clip: removable, in micropallinated titanium
Packaging: December 2006 "Sebenza Classic MM" version - Previously purchased, from private collection - Full set, complete with white cardboard box with Chris Reeve logos and warranty certificates, original leather sheath with Chris Reeve logosCR-LSCMMM-CP -
Chris Reeve - Small Sebenza 31 Plain Tanto - MagnaCut & Titanium Natural Micarta Inlays - knife
The idea behind the Sebenza has never wavered: to create the best pocket knife in the world.
First-rate materials, fine finishes, and a security locking system, all in an incredibly lightweight and precision tool. This commitment continues with the new Sebenza 31 with ceramic ball interface.
Like the first Sebenza, it offers the same warm "click" and heirloom quality produced to aerospace tolerances. The Sebenza 31 adds finer details to an already fine knife, taking another steady and reliable step forward.
Intended Use: Collector/SportsmanType of manufacture: MidTech
Country of manufacture: USA
Blade: CPM MagnaCut steel at 63/64HRC
Blade finish: Stonewashed
Handle: Titanium 6AL4V microblasted with micarta inserts
Blade length: 76.2mm.
Blade thickness: 3mm.
Length closed: 101mm.
Total length: 177.3mm.
Weight: 85g.
Closure: Frame Lock
Clip: Titanium 6AL4V microblasted
Package: Cardboard box with Chris Reeve logos, Fluorinated grease, Threadlocker, Disassembly tool, Microfiber cloth, Manuals and Warranty Certificate
Notes: -CR-S31-1230 -
Chris Reeve - Large Sebenza 31 Plain Tanto - MagnaCut & Titanium - knife
The idea behind the Sebenza has never wavered: to create the best pocket knife in the world.
First-rate materials, fine finishes and a security locking system, all in an incredibly lightweight and precision tool. This commitment continues with the new Sebenza 31 with ceramic ball interface.
Like the first Sebenza, it offers the same warm "click" and heirloom quality produced to aerospace tolerances. The Sebenza 31 adds finer details to an already fine knife, taking another steady and reliable step forward.
Intended Use: Collector/SportsmanType of manufacture: MidTech
Country of manufacture: USA
Blade: CPM MagnaCut steel at 63/64HRC
Blade finish: Stonewashed
Handle: Titanium 6AL4V microblasted
Blade length: 91.7mm.
Blade thickness: 3mm.
Length closed: 122mm.
Total length: 213.5mm.
Weight: 133g.
Closure: Frame Lock
Clip: Titanium 6AL4V microblasted
Package: Cardboard box with Chris Reeve logos, Fluorinated grease, Threadlocker, Disassembly tool, Microfiber cloth, Manuals and Warranty Certificate
Notes: -CR-L31-1010 -
Chris Reeve - Inyoni Drop Point - MagnaCut & Natural Canvas Micarta - knife
In the tradition of Chris Reeve Knives, the Inyoni bird and fish hunting knife takes its name from the Zulu word for "bird." Light as a feather, weighing 68 grams, the latest version of the Inyoni offers all the functionality of its predecessor, without the weight.
Its full-tang drop point blade makes it the ideal knife for processing birds and fish, while providing ample edge for many stages of processing larger game, as well as a long list of other cutting tasks outside the hunting field. The thin Kydex sheath fits perfectly over the handles of the Inyoni.
Intended use: sports/hunting
Type of Manufacture: MidTech
Country of Manufacture: USA
Blade: full tang in CPM MagnaCut 63/64HRC steel
Blade finish: stonewashed
Handle: Micarta
Blade length: 96mm.
Blade thickness: 3.2mm.
Total length: 202mm.
Weight: 68g.
Sheath: Slim Fit in thermoformed Kydex.
Packaging: cardboard box with Chris Reeve logos, paracord lanyard, maintenance key, certificates and warrantiesCR-INY-1001 -
Chris Reeve - Sable III Integral Knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new, never used
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Absent
* Scabbard: Present, original, like new
* Manuals, Certificates and Warranties: No
* Checked and Certified by our in-house laboratoryIntended Use: Collecting/Hunting/Sporting
Production type: Midtech
Country of Production: USA
Blade: A2 55/57HRC steel
Blade Treatment: gunkote
Handle: A2 55/57HRC steel with alluminium screwed cap
Blade length: 108mm.
Blade thickness: 4mm.
Total length: 205mm.
Weight: 203g.
Sheath: Black leather
Packaging: -
Notes: knife withdrawn from private collection like new, lacks packaging and certificatesCR-SA3-CP -
Chris Reeve - Large Sebenza 21 Plain knife - Insingo - PRIVATE COLLECTION - knife
Knife withdrawn from a private collection, Chris Reeve model out of production and no longer available on the market. In excellent condition, complete with original box, certificates, stickers, cleaning cloth, fluorinated grease and maintenance key - Checked and certified by our in-house Coltelleria Collini laboratory.
Intended use: collection / sports
Type of production: Semi-Artisan
Production Lama: USA
Blade: CPM-S35VN 58 / 59HRC stainless steel
Handle: Titanium with micarta inserts
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 210mm.
Thick when closed: 17mm.
Weight: 134g.
Closure: Frame Lock
Clip: removable, in titanium
Packaging: white cardboard box with Chris Reeve logos and warranty certificatesL21-1008-CP -
Chris Reeve - Inyoni knife - Cocobolo - PRIVATE COLLECTION - collection knife
Rare knife produced by Chris Reeve in 2007 and no longer in production since 2013. Knife from a private collection in like new condition, with original sheath, without original box and certificate. Checked and certified by our internal laboratory.
Intended use: sports / huntingBlade: CPM-S30V 58 / 59HRC stainless steel
Blade treatment: stonewash finish
Handle: Cocobolo wood
Blade length: 88mm.
Blade thickness: 3.5mm.
Closed Length: -
Total length: 201mm.
Balancing: set back
Weight: 76g.
Closure: -
Clip: -
Sheath: in leather
Notes: inyoni in Zulu means birdAP-INY-CR -
Kasumi Japan - Sharpening stone - Grain 3000/8000 - 80002 - knives accessories
Kasumi 80002 combination sharpening stone with fine (3000) and superfine (8000) grit. Excellent for giving your knives a razor sharpening.
The # 8000 grit was developed specifically for knives and knives made of special steels.
# 8000 grit is nearly the same grain and quality as a natural whetstone used to sharpen Japanese samurai swords.
With the right technique and experience, the # 3000 / # 8000 whetstone combination will give your knives a beautiful mirror edge, just like the edge of a samurai sword.
The whetstone comes with a hard rubber base for use when sharpening.
There is also a small abrasive stone to be used to grind the surface of the stone.
Dimensions:
length 175 x width 60 x height 25 mm - Weight: 635g.
Quality level: very highKJ80002 -
Chris Reeve - Green Beret 5.5 "knife - Dark Earth by W. Harsey - knife
Intended use: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: CPM-S35VN stainless steel at 55 / 57HRC
Surface treatment: Dark Earth PVD
Handle: Black Canvas Micarta
Blade length: 140mm.
Blade thickness: 5.58mm.
Total length: 276mm.
Balancing: on the lower guard branch
Weight: 335g.
Sheath: Nylon thigh, M.O.L.L.E.compatible
Notes: New 2018 version - Guarantee and authenticity certificates - Design by William W. HarseyGBS-1002 -
Nitecore - Multi Purpose Utility Black Pouch - NUP30 - Shoulder bag
Practical Cordura bag, light and resistant, designed for storing and transporting LED flashlights, folding knives, multi-purpose knives and multi-purpose pliers as well as keys, wallets, electronic objects etc.
Can be used over the shoulder, with a single shoulder strap or with MOLLE compatible attachments. Possibility to hook it to other backpacks to use it as an additional compartment. It offers two spacious compartmented compartments, closed independently with a zip.
Features and Materials:- 600 denier Cordura Nylon water and abrasion resistant with Velcro compatible parts
- External treatment for fabrics that ensures resistance to dirt and facilitates maintenance
- Designed for daily use or for excursions
- Pockets with compartments to allow the housing of different tools
- Soft interior to protect housed tools
- Nylon internal elastic to better modulate the hosted tools
- Full ambidextrous operation
- MOLLE type rear coupling systems, in high-strength nylon
- Adjustable and removable Nylon shoulder strap
- Weighs only 300g
- Dimensions of 19x28.5x7.5cmNI-NUP30 -
Nitecore - NTK05 EDC Ultra-Tiny Titanium Keychain Knife - cutter
Ultra-Tiny keyring knife, made of TC4 titanium alloy and made with precise CNC machining.
The NTK05 model uses a No. 11 scalpel blade, easily replaceable and accessible in the market.The comfortable 35-degree grip ensures stability and cutting precision.
The elegant and tapered design allows it to be attached to a key ring, to a backpack, to use it as a mini EDC or as a pendant.Type of production: industrial
Country of production: China
Blade: replaceable, in stainless steel, N.11 Scalpel Blade
Handle: unibody in titanium with the following sizes 55mm x 12mm x 3mm
Blade length: 20mm.
Blade thickness: 0.3mm.
Total length open: 96mm with blade completely extracted
Weight: 5g.
Clip: -
Packaging: Cardboard box with Nitecore logos
Note: -NI-NTK05 -
Nitecore - Titanium Bolt Action Tactical Pen NTP30 - tactical pen
NITECORE NTP40 At-A-Glance
- Smooth and clear writing is ideal for cartooning, sketching, and daily writing
- Lightweight compact design for everyday carry
- Anti-sliding thread prevents sliding and reduces fatigue
- Streamlined clip for carrying on your pocket, shirt, or backpack
- Body constructed from titanium alloy
- Impact and corrosion resistant
- Included in the Box
NITECORE NTP40 mechanical pencil
High Quality Titanium Alloy Pencil - NITECORE releases the ultimate all-purpose writing utensil, the NITECORE NTP40 titanium alloy mechanical pencil. The NTP40 is designed with an artistic round chamber, housing the German Schmidt Feinminen System and an abrasion resistant crystallized cap. For writing, the 0.5mm lead of the NTP40 offers smooth and clear writing while sketching and daily writing outdoorsRobust and Premium Build
With exquisite craftsmanship, the NTP40 mechanical pencil is constructed from TC4 titanium alloy that offers lightweight ruggedness with an excellent resistance to impact and corrosion. The NTP40 is designed to be used outdoors and is perfect to withstand harsh conditions.Designed for Everyday Carry
Designed to be comfortable, the body of the NTP40 has 26 loops of anti-skid threads in the center which increases friction and prevents sliding. A rigid hollowed clip allows you to easily attach the pencil to your pocket, shirt, or backpack to avoid the loss of the pencil. Weighing only 0.84 ounces and measuring less than 6 inches in length, the sleek NTP40 is the perfect addition to your EDC gear.TECHNICAL SPECIFICATIONS
Body Material Titanium Alloy TC4
Length 5.4 inches
Diameter 0.35 inches
Mechanism Type Schmidt Feinminen System
Lead Refill 0.5mm
Dimensions L-5.4"xW-0.35"xH-0.35"
Weight 0.84ozNI-NTP40 -
Nitecore - Titanium Bolt Action Tactical Pen NTP30 - tactical pen
Elegant, tactical and indestructible titanium pen, useful also as crystal crystals and for self defense with "sliding shutter" grafting system.
* Weight: 30g
* Total length: 133mm.
* Material: titanium
* Diameter: 9.3 mm.
* Glass breaking tip: tungsten steel
* Ink: black with Refill Schneider Gelion 39.NI-NTP30 -
Chris Reeve - Large Inkosi - Insingo Blade - knife
Intended Use: Collection / Sports
Blade: CPM-S35VN stainless steel 58/59 HRC
Country of Origin: USA
Finish: stonewashed
Handle: Titanium
Blade length: 92mm.
Blade Thickness: 3.56mm.
Closed Length: 123mm.
Overall length: 212mm.
Weight: 140g.
Lock: Frame Lock
Clip: Titanium
Packaging: cardboard box with CRK logos, microfiber cloth, guarantee certificates
Notes: -LIN-1022 -
Chris Reeve - Small Inkosi - Insingo Blade - knife
Intended use: Sports / Collection
Type of production: Semi-Artisan
Country of production: USA
Blade: CPM-S35VN 58 / 59HRC stainless steel
Blade treatment: stonewashed
Handle: titanium 6Al4V
Blade length: 70mm.
Blade thickness: 3.5mm.
Length closed: 95mm.
Total length: 165mm.
Thick when closed: 17mm.
Weight: 78g.
Closure: Frame Lock
Clip: titanium, removable
Packaging: cardboard box with Chris Reeve logos, warranty certificates, microfibre cloth, maintenance kit
Note: -SIN-1022 -
Chris Reeve - Green Beret 7" knife by W. Harsey - 2017 Version - knife
Purpose: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Black PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyGB7-1000 -
Chris Reeve - Green Beret 7" knife Dark Earth by W. Harsey - 2017 Version - knife
Purpose: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Dark Earth PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyGB7-1002 -
Chris Reeve - Umnumzaan Clip Plain - folding knife
Purpose: Sportsman / Collectibles
Type of production: Semi-craftsmanship
Blade Production: USA
Blade: Stainless steel CPM-S35VN 58 / 59HRC
Blade treatment: stonewashed
Manicure: Titanium 6AI4V
Blade Length: 90mm.
Blade thickness: 3.5mm.
Closed length: 123mm.
Overall length: 212mm.
Closed thickness: 17mm.
Balance: -
Weight: 142g.
Closure: Frame Lock
Clip: stainless steel
Sheath: -
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: -UMN-1000 -
Chris Reeve - Professional Soldier by W. Harsey - Tanto - 2017 Version - knife
Use target: Neck Knife / Sportsman / Tactical
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN 55 / 57HRC
Surface treatment: PVD
Handle: Stainless steel CPM-S35VN 58 / 59HRC
Blade Length: 86mm.
Blade thickness: 4.2mm.
Total length: 184mm.
Weight: 85g.
Sheath: in Kydex, ultra-thin
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: Design by William W. HarseyPRO-1002 -
Chris Reeve - Professional Soldier by W. Harsey - Insingo - 2017 Version - knife
Use target: Neck Knife / Sportsman / Tactical
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN 55 / 57HRC
Surface treatment: PVD
Handle: Stainless steel CPM-S35VN 58 / 59HRC
Blade Length: 86mm.
Blade thickness: 4.2mm.
Total length: 184mm.
Weight: 85g.
Sheath: in Kydex, ultra-thin
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: Design by William W. HarseyPRO-1001 -
Chris Reeve - Professional Soldier by W. Harsey - Drop - 2017 Version
Use target: Neck Knife / Sportsman / Tactical
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN 55 / 57HRC
Surface treatment: PVD
Handle: Stainless steel CPM-S35VN 58 / 59HRC
Blade Length: 86mm.
Blade thickness: 4.2mm.
Total length: 184mm.
Weight: 85g.
Sheath: in Kydex, ultra-thin
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: Design by William W. HarseyPRO-1000 -
Chris Reeve - Pacific Dark Eart by W. Harsey - 2017 Version - knife
Purpose of use: Collection / Utility
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: PVD
Handle: Black Canvas Micarta
Blade Length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyPAC-1005 -
Chris Reeve - Pacific Plain by W. Harsey - 2017 Version - knife
Purpose of use: Collection / Utility
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: PVD
Handle: Black Canvas Micarta
Blade Length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyPAC-1000 -
Chris Reeve - Small Inkosi knife - knife
Purpose: Sportsman / Collectibles
Type of production: Semi-craftsmanship
Blade Production: USA
Blade: Stainless steel CPM-S35VN 58 / 59HRC
Blade treatment: stonewashed
Manicure: Titanium inlay
Blade Length: 70mm.
Blade thickness: 3.5mm.
Closed length: 95mm.
Total length: 165mm.
Closed thickness: 17mm.
Balance: -
Weight: 78g.
Closure: Frame Lock
Clip: stainless steel
Sheath: -
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: -SIN-1000 -
Chris Reeve - Small Sebenza 21 Cross Hatch - knife
Purpose: Sportsman / Collectibles
Type of production: Semi-craftsmanship
Blade Production: USA
Blade: Stainless steel CPM-S35VN 58 / 59HRC
Blade treatment: stonewashed
Manicure: Titanium
Blade Length: 75mm.
Blade thickness: 3.5mm.
Closed length: 100mm.
Total Length: 175mm.
Closed thickness: 17mm.
Balance: -
Weight: 78g.
Closure: Frame Lock
Clip: stainless steel
Sheath: -
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: -S21-1036 -
Chris Reeve - Large Sebenza 21 - Plain Insingo - knife
Intended use: collection / sports
Type of production: Semi-Artisan
Production Lama: USA
Blade: CPM-S35VN 58 / 59HRC stainless steel
Handle: Titanium with micarta inserts
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 210mm.
Thick when closed: 17mm.
Weight: 134g.
Closure: Frame Lock
Clip: removable, in titanium
Packaging: white cardboard box with Chris Reeve logos and warranty certificatesL21-1008 -
Chris Reeve - Pacific by W. Harsey - 2017 Version - knife
Purpose of use: Collection / Utility
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: PVD
Handle: Black Canvas Micarta
Blade Length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyPAC-1001 -
Chris Reeve - Green Beret 5.5" Dark Earth by W. Harsey - 2017 Version - knife
Purpose: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Dark Earth PVD
Handle: Black Canvas Micarta
Blade Length: 140mm.
Blade thickness: 5.58mm.
Total length: 276mm.
Balance: on the lower guard branch
Weight: 335g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyGB5-1003 -
Chris Reeve - Green Beret 7" Dark Earth by W. Harsey - 2017 Version - knife
Purpose: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Dark Earth PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyGB7-1003 -
Chris Reeve - Green Beret 7" by W. Harsey - 2017 Version - knife
Purpose: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Black PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyGB7-1001 -
Hoffner - Bodyguard Neck knife NKNIFE1 - knife
Intended use: Tactical / CQC
Type of production: Industrial
Blade: stainless steel 440C
Blade treatment: Black
Handle: -
Blade length: 60mm.
Blade thickness: 2 mm.
Overall length: 155mm.
Balancing: -
Weight: 52g.
Sheath: Kydex Black Click-Lok
Packaging: cardboard box with Hoffner logosLightweight, Ultra Flat, so easy to conceal, but sharp, strong, and ready for a fast deployment. The Hoffner Bodyguard Neck Knife can be used with the RGH (Rear Grip Hold) Hoffner System or with traditional grips. The hole Provides secure and balanced grip transitions as well as grip security.
NKNIFE1 -
Chris Reeve - Mk IV 28 Year Commemorative knife
Chris Reeve - Mk IV 28 Year Commemorative knife
For 28 years, (the A2 round handled) One Piece Range of knives has been an essential part of Chris Reeve Knives. From Chris first designing the concept while serving in the South African Army in Namibia to today, these knives have been used, carried, admired and collected in all corners of the world.
An integral part of the success of this range has been Eddie Myers. Eddie was Chris's foreman when Chris was an apprentice tool and die maker. They have known each other more years than they care to count and Chris has always regarded Eddie as mentor, teacher, friend and consultant! For 25 years, Eddie has machined the blanks for our One Piece Knives. Still living in South Africa, Eddie and his wife Caroline, have provided fine service to deliver the best blanks at the best price. (There is no question that the volatility of the South African currency has helped over the years!)
Eddie and Caroline want to retire. Ed wants to buy a boat again and go fishing whenever he feels like it! This brought us to a cross-roads--do we try to source a vendor in the USA or should we simply retire a - Classic. We have decided to take the second choice--to discontinue the One Piece Range.
To celebrate the end of this era, Chris Reeve Knives offered a limited edition of 250 Commemorative Mk IVs. The Mk IV was the first iteration of the one piece concept to become known there is still call for this model which we initially discontinued in 1995. It has a 7 inch blade with a clip point and sawback. For this commemorative edition, the butt cap is engraved and polished and the sheath has a commemorative logo embossed.
Specifications
Blade Material: A2 tool steel
Blade Hardness: 55-57 RC
Blade Coating: KG Gun-Kote
Blade Length: 7" sawback blade
Blade Thickness: 0.187"
Overall Length: 12"
Handle Material: A2 Tool Steel
But Cap Material: D65S aluminum
Sheath: Leather with horizontal carry belt loop, Snap
Weight: 12.90 oz. (365 grams)
Limited Edition, only 250 pieces produced!
Handmade in the USA
One Piece Knife ConceptThe idea of the one piece knife was born while Chris was serving time in the South African Army on the Namibia/Angola border in 1979. The experiences of military service have contributed substantially to the features in these knives.
Chris realized that the ideal working knife was a tool which was strong, reliable and impervious to temperature and humidity. Extensive time has been devoted to design, and research and development to improve both the blade designs and the methods used in making the knives.
Each knife is made from a solid billet of A2 tool steel. The stock removal method results in two distinct advantages--the strength/weight ratio is exceptional and there is no handle/blade join. This means that there is no area where the blade and handle could come apart--a weakness in the design of other hollow handle knives. The handle cavity is larger than that of any similar knife. The hollow handle is closed with a butt cap made of 6061 aluminum which screws into the handle against a Neoprene "O" ring, ensuring the cavity is sealed from dust and moisture. All the one piece knives are hardened to 55-57 RC and random checks are made to ensure accuracy. This hardness gives superb toughness, good edge retention and allows for efficient sharpening in the field. Each knife is coated with super hi-tech KG Gun-Koteä originally developed for use in the aerospace industry. This coating offers a durable, long-lasting, non-reflective covering. Included in the price of each knife is a hand-made leather sheath. A lifelong guarantee, signed by Chris accompanies each knife.
The one piece design offers the highest possible weight/strength ratio
A2 Tool Steel offers excellent edge retention and good shock resistance
Hardness at between 55 and 57 Rockwell C is not brittle but gives good edge retention along with ease of sharpening
An 8" hollow grind is used with a full thickness back edge. All designs are ground to allow the full thickness of the back edge to come as close to the point as possible, affording a very strong front tip but not restricting the knife's ability to pierce
The hollow handle, which is created to reduce weight, is larger than any similar sized knife because there is no join between handle and blade
The aluminum butt cap provides an airtight closure for the hollow handle and is designed so that it can be used for hammering. Because using the knife as a hammer can be dangerous to one's knuckles and fingers, we do not recommend that this be done unless in an emergency situation. It is preferable to use a hammer
Full depth precision machined knurling affords maximum non-slip grip
Non-reflective KG Gun-Koteä coating gives lasting protection
All knives carry a lifetime guarantee and a damaged knife will be replaced or repaired at Chris' discretion. This guarantee does not cover damage to a knife that has been thrown or used for heavy levering
These knives are used by hunters, backpackers, SWAT teams, military personnel, firefighters and police all over the world. They are also to be found in many knife collections and most of our customers own more than one of our knives
Each hand made leather sheath is designed to fit the knife well, to give maximum protection to the carrier and the knife when being carried. Because we continue to improve our design, sheaths supplied might not be exactly as shown in the brochure
Replacement butt caps and sheaths are available at reasonable prices
Many customers feel that once their knives have been used, they lose collector's value. This is not so as the knife can be returned to Chris Reeve Knives, where it will be sandblasted, re-coated with KG Gun-Kotea, sharpened and returned to it's original condition. Contact Chris Reeve Knives for cost. Please return knife in sheathCR-MkIV -
Hoffner - Black Folding knife 3.5" Black chiseled - knife
Intended use: Tactical / CQC
Type of production: Industrial
Blade: stainless steel 440C
Blade treatment: -
Handle: G-10 black chiseled
Blade length: 90mm.
Blade thickness: 2.5mm.
Closed Length: 125mm.
Overall length: 210mm.
Thick when closed: -
Balancing: -
Weight: 148g.
Lock: Liner Lock
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with Hoffner logosfx-s3sbk-cb -
Hoffner - Creed knife M3SBS-FB G10 Black - knife
Intended use: Tactical / CQC
Type of production: Industrial
production Blade: Taiwan
Blade: D2 steel Flipper opening system
Blade treatment: satin
Handle: Black G10
Blade length: 86mm.
Blade thickness: 5mm.
Closed Length: 125mm.
Overall length: 215mm.
Thick when closed: 16mm
Balancing: -
Weight: 216g.
Lock: Liner Lock
Clip: removable and reversible stainless steel
Notes: opening on ball bearings
Packaging: cardboard box with Hoffner logosM3SBS-FB -
Hoffner - Creed knife M3SBS-CF Carbon Fiber - knife
Intended use: Tactical / CQC
Type of production: Industrial
production Blade: Taiwan
Blade: D2 steel Flipper opening system
Blade treatment: satin
Handle: carbon fiber
Blade length: 86mm.
Blade thickness: 5mm.
Closed Length: 125mm.
Overall length: 215mm.
Thick when closed: 16mm
Balancing: -
Weight: 212g.
Lock: Liner Lock
Clip: removable and reversible stainless steel
Notes: opening on ball bearings
Packaging: cardboard box with Hoffner logosM3SBS-CF -
Hoffner - Creed knife M3SBS CB-G10 chiseled - knife
Intended use: Tactical / CQCType of production: Industrial
production Blade: Taiwan
Blade: D2 steel Flipper opening system
Blade treatment: satin
Handle: G-10 chiseled
Blade length: 86mm.
Blade thickness: 5mm.
Closed Length: 125mm.
Overall length: 215mm.
Thick when closed: 16mm
Balancing: -
Weight: 218g.
Lock: Liner Lock
Clip: removable and reversible stainless steel
Notes: opening on ball bearings
Packaging: cardboard box with Hoffner logosM3SBS-CB -
Chris Reeve - Large Inkosi - folding knife
Intended Use: Collection / Sports
Blade: CPM-S35VN stainless steel 58/59 HRC
Country of Origin: USA
Finish: stonewashed
Handle: Titanium
Blade length: 92mm.
Blade Thickness: 3.56mm.
Closed Length: 123mm.
Overall length: 212mm.
Weight: 140g.
Lock: Frame Lock
Clip: Titanium
Packaging: cardboard box with CRK logos, microfiber cloth, guarantee certificates
Notes: -LIN-1000 -
Chris Reeve - Sikayo - 6.5" Santoku - Kitchen Knife
Uso Consigliato: verdura, carne cruda, pesce
Produzione: Idaho, USA
Lama: in acciaio inox CPM-S35VN con finitura Silver PVD
Taglio: di tipo asimmetrico, non adatta a mancini
Lunghezza Lama: 165mm.
Lunghezza Totale: 286mm.
Impugnatura: Ultem 1000 (un particolare polimero incredibilmente resistente ad abrasioni e ad alte temperature)
Spessore Lama: 3.8mm.
Peso: 179g.12428 -
Chris Reeve - Nyala Insingo - knife
Destinazione d'uso: Caccia/Sportivo
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio inox CPM-S35VN 58/59HRC
Trattamento Lama: Stone Washed
Manicatura: Brown canvas Micarta
Lunghezza lama: 95mm.
Spessore lama: 4.5mm.
Lunghezza chiuso: -
Lunghezza totale: 216mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 175g.
Chiusura: -
Clip: -
Fodero: Cuoio marrone by Gfeller Casemakers
Confezione: Scatola di cartone bianca con loghi Chris Reeve; certificati di garanzia
Note: -12424 -
Chris Reeve - Ubejane Skinner - coltello
Raro coltello fuori serie realizzato nel 2009 da Chris Reeve.
Il nome Ubejane significa Rinoceronte nella lingua Zulu in South Africa.
Destinazione d'uso: Collezione/Caccia/Sportivo
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio A2 55/57HRC
Trattamento Lama: black
Manicatura: Brown canvas Micarta
Lunghezza lama: 100mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 230mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 312g.
Chiusura: -
Clip: -
Fodero: Cuoio nero
Confezione: Scatola di cartone bianca con loghi Chris Reeve; certificati di garanzia
Note: coltello fuori produzione dal 2011CR-SKINNER -
Hoffner - Khaki Flatline Folding 2.8" Black Combo - FK-S2CBK-FK - knife
Intended Use: Tactical / CQC
Type of production: Industrial
Production Lama: China
Blade: Stainless steel 440C
Treatment Lama: -
Handle: G-10
Blade length: 70mm.
Blade thickness: 2.5mm.
Closed Length: 100mm.
Overall length: 170mm.
Thick when closed: -
Balancing: -
Weight: 88g.
Lock: Liner Lock
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos Hoffner12370 -
Hoffner - Chiseled Folding 3.5" Corona Maduro - ATA - FK-S3SBS-CMA - knife
Intended Use: Tactical / CQC
Type of production: Industrial
Production Lama: China
Blade: Stainless steel 440C
Treatment Lama: -
Handle: G-10
Blade length: 90mm.
Blade thickness: 2.5mm.
Closed Length: 125mm.
Overall length: 210mm.
Thick when closed: -
Balancing: -
Weight: 132g.
Lock: Liner Lock
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos Hoffner12369 -
Hoffner - Mano Lanza EOD Desierto HS-S5CBK-FK - Cuchillo
Hoffner - Mano Lanza EOD Desierto HS-S5CBK-FK - Cuchillo
Uso previsto: Táctico / CQC
Tipo de producción: Industrial
Hoja: acero inoxidable 440C
Tratamiento Lama: Negro
Mango: G-10 Desierto
Longitud de la hoja: 125 mm.
Grosor de la hoja: 5 mm.
Longitud total: 245 mm.
Equilibrio: -
Peso: 276g.
Funda: Kydex Negro Click-Lok
Embalaje: caja de cartón con logotipos HoffnerH12243 -
Hoffner - Hand Spear Molon Labe Green HS-S5CBK-FO - knife
Hoffner - Hand Spear Molon Labe Green HS-S5CBK-FO - knife
Intended Use: Tactical / CQC
Type of production: Industrial
Blade: Stainless steel 440C
Treatment Lama: Black
Handle: G-10 Green
Blade length: 125mm.
Blade thickness: 5mm.
Overall length: 245mm.
Balancing: -
Weight: 276g.
Sheath: Kydex Black Click-Lok
Packaging: cardboard box with logos HoffnerH12242 -
Hoffner - Hand Spear SWAT Black HS-S5CBK-FB - knife
Hoffner - Hand Spear SWAT Black HS-S5CBK-FB - knife
Intended Use: Tactical / CQC
Type of production: Industrial
Blade: Stainless steel 440C
Treatment Lama: Black
Handle: G-10 Black
Blade length: 125mm.
Blade thickness: 5mm.
Overall length: 245mm.
Balancing: -
Weight: 276g.
Sheath: Kydex Black Click-Lok
Packaging: cardboard box with logos HoffnerH12241 -
Hoffner - Red Trainer Flatline FIRE DEPT. Folding 3.5 "- FK-RED-FIRE - knife
Hoffner - Red Trainer Flatline FIRE DEPT. Folding 3.5 "- FK-RED-FIRE - knife
Intended Use: Tactical / CQC / Training
Type of production: Industrial
Blade: Stainless steel 440C blade and rounded tip
Treatment Lama: -
Handle: G-10 Red
Blade length: 90mm.
Blade thickness: 2.5mm.
Closed Length: 125mm.
Overall length: 210mm.
Thick when closed: -
Balancing: -
Weight: 135g.
Lock: Liner Lock
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos HoffnerH12239 -
Hoffner - Black Flatline Molon Labe Folding 3.5 "Satin - FK-S3CSS-FB - knife
Hoffner - Black Flatline Molon Labe Folding 3.5 "Satin - FK-S3CSS-FB - knife
Destinazione d'uso: Tattico / CQC
Tipo di produzione: Industriale
Lama: In acciaio inox 440C
Trattamento Lama: -
Manicatura: G-10 Black
Lunghezza lama: 90mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 125mm.
Lunghezza totale: 210mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 132g.
Chiusura: Liner Lock
Clip: amovibile e reversibile in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi HoffnerH12240 -
Hoffner - Black Flatline SWAT Folding 3.5 "Satin - FK-S3CSS-FB - knife
Hoffner - Black Flatline SWAT Folding 3.5" Satin - FK-S3CSS-FB - coltello
Destinazione d'uso: Tattico / CQC
Tipo di produzione: Industriale
Lama: In acciaio inox 440C
Trattamento Lama: -
Manicatura: G-10 Black
Lunghezza lama: 90mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 125mm.
Lunghezza totale: 210mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 132g.
Chiusura: Liner Lock
Clip: amovibile e reversibile in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi HoffnerH12237 -
Hoffner - Smooth Folding 3.5" Damascus Bloodflow - ATA - FK-S3SDB-SDB - knife
Intended Use: Tactical / CQC
Type of production: Industrial
Production Lama: China
Blade: Stainless steel 440C, laminated to 67 layers
Treatment Lama: -
Handle: G-10
Blade length: 90mm.
Blade thickness: 2.5mm.
Closed Length: 125mm.
Overall length: 210mm.
Thick when closed: -
Balancing: -
Weight: 132g.
Lock: Liner Lock
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos Hoffner12236 -
Hoffner - Olive Folding knife 3.5 "Black chiseled - knife
Intended use: Tactical / CQC
Type of production: Industrial
Blade: stainless steel 440C
Blade treatment: -
Handle: G-10 olive chiseled
Blade length: 90mm.
Blade thickness: 2.5mm.
Closed Length: 125mm.
Overall length: 210mm.
Thick when closed: -
Balancing: -
Weight: 148g.
Lock: Liner Lock
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with Hoffner logosFK-S3SBK-FO -
Hoffner - Black Flatline Folding 2.8 "Satin Combo - FK-S2CSS-FB - knife
Hoffner - Black Flatline Folding 2.8 "Satin Combo - FK-S2CSS-FB - knife
Intended Use: Tactical / CQC
Type of production: Industrial
Production Lama: China
Blade: Stainless steel 440C
Treatment Lama: -
Handle: G-10 Black
Blade length: 70mm.
Blade thickness: 2.5mm.
Closed Length: 100mm.
Overall length: 170mm.
Thick when closed: -
Balancing: -
Weight: 88g.
Lock: Liner Lock
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos Hoffner12234 -
Hoffner - Chiseled Folding 3.5" Chess Match - ATA - FK-S3SBS-CMA - knife
Intended Use: Tactical / CQC
Type of production: Industrial
Production Lama: China
Blade: Stainless steel 440C
Treatment Lama: -
Handle: G-10
Blade length: 90mm.
Blade thickness: 2.5mm.
Closed Length: 125mm.
Overall length: 210mm.
Thick when closed: -
Balancing: -
Weight: 132g.
Lock: Liner Lock
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos Hoffner12233 -
Chris Reeve - Impofu 10" Limited Edition - knife
Collini Cutlery is the official distributor for Italy of tactical knives / collection made in the USA Chris Reeve
Made at the Blade Show in 2014 in a limited edition of only 500 pieces worldwide, the impofu (eland antelope, Lungu in Zulu) is a fixed blade knife largest and most impressive ever produced by Chris Reeve.
Use: Collection / Heavy Utility
Type of production: semi-homemade
Blade: Stainless Steel Tool CPM-3V 58 / 60HRC
Production Lama USA
Handle: Black Canvas Micarta
Blade length: 254mm.
Blade Thickness: 6.8mm.
Length closed: -
Overall length: 413mm.
Balancing: Advanced
Weight: 573g.
Closed: -
Sheath: Black Leather by Gfeller Casemakers
Notes: Production limited to 500 pieces worldwide - Certificate of Authenticity and warranty0038 -
Chris Reeve - Small Sebenza 21 - Unique Graphic Design - knife
Chris Reeve - Small Sebenza 21 - Unique Graphic Design - knife
Intended use: Collection / Sports
Blade: Stainless steel CPM-S35VN 58/59HRC
Handle: Titanium polished with computer graphics
Blade length: 73mm.
Blade Thickness: 3mm.
Closed Length: 98mm.
Overall length: 175mm.
Balancing: -
Weight: 80g.
Lock: Frame Lock
Clip: Titanium
Note: Product May 28, 201410203 -
Chris Reeve - Small Sebenza 21 - Unique Graphic Design - knife
Chris Reeve - Small Sebenza 21 - Unique Graphic Design - knife
Intended use: Collection / Sports
Blade: Stainless steel CPM-S35VN 58/59HRC
Handle: Titanium polished with computer graphics
Blade length: 73mm.
Blade Thickness: 3mm.
Closed Length: 98mm.
Overall length: 175mm.
Balancing: -
Weight: 80g.
Lock: Frame Lock
Clip: Titanium
Note: Product May 28, 201410980 -
Chris Reeve - Glorious Computer Graphic - Large Sebenza 21 - knife
Destinazione d'uso: Sportivo / Collezione
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: in acciaio inox CPM-S35VN 58/59HRC
Manicatura: Titanio 6AL4V, con incisioni Computer Graphic
Lunghezza lama: 90mm.
Spessore lama: 3mm.
Lunghezza chiuso: 120mm.
Lunghezza totale: 207mm.
Spessore da chiuso: 17mm
Peso: 125g.
Chiusura: Frame Lock
Clip: amovibile, in titanio
Confezione: scatola in cartone bianco con loghi Chris Reeve e certificati di garanzia, olio lubrificante, custodia da tasca in cuoio e panno in microfibra per la manutenzione10853 -
Chris Reeve - New Sebenza 25 - knife
Sebenza 25:
Making the Best Even Better
Virtually every year since the inception of the Sebenza in 1987 has seen small, incremental developments, improvements and changes. Celebrating the 25th anniversary of the Sebenza in 2012, Chris brought some new concepts to the Sebenza 25.
• Large Hollow Grind Technology—the first blade to feature this new grind that blends the best of hollow and flat grinds.
• Shaped phosphor bronze washer on the lock side brings additional stability to that side of the blade.
• One-eighth inch ceramic ball acts as the interface between the lock bar and the blade, and doubles to drop into the detent, ensuring the blade stays in place when closed.
• Larger perforations in the washers reduce friction, store more lubricant and offer space for small dirt particles to move away from the blade/washer interface, helping to prevent blade action from becoming “sticky”.
• 416 Heat treated stainless steel stop pin is interference fit into the lock side of the handle.
• Asymmetrical pattern thumb serrations on a curved thumb ramp of the blade give excellent purchase.
At 0.140” (3.56mm), the blade is more robust than previous Sebenza models.
SPECIFICATIONS:
Blade Material:
CPM S35VN Stainless Steel
Blade Hardness:
58-59 RC
Blade Length:
Large - 3.625" (92 mm)
Blade Thickness:
0.14" (3.56 mm)
Overall Length:
8.335" (212 mm)
Handle Length:
4.71" (147.64 mm)
Handle Material:
6Al4V Titanium
Handle Thickness:
0.150" (3.8 mm)
Weight:
5.2 oz. (145 g)
Fittings:
303 Stainless Steel
Double Thumblugs:
6Al4V Titanium
Pocket Clip:
6Al4V Titaniumsebenza25 -
Chris Reeve - Mnandi Elder Burl Inlay - knife
Intended use: Collection / Sports
Blade: stainless steel CPM-S35VN 58/59HRC
Handle: Titanium and Radica
Blade length: 70mm.
Blade Thickness: 2mm.
Closed Length: 91mm.
Total length: 156mm.
balance:
Weight: 40g.
Closure: Frame Lock
Clip: Stainless Steel
Sheath: Leather
Notes: Production certificate included: production date July 30, 2013 - Mnandi in Zulu means "very nice"0019R -
Hollywood Collectibles Group - Rambo IV knife - Standard Edition - knife
Intended use: Survival / Collection
Blade: stainless steel
Lama Lama production
Handle: Dark brown leather
Blade length: 290mm.
Blade thickness: 7mm.
Length closed: -
Total length: 460mm.
Balancing: advanced to 4 cm.
Weight: 1.098g.
Closure: -
Clip: -
Sheath: in leather
Notes: Official reproduction with movie license6513N€0.00Only -99 leftOut of stock -
Master Cutlery - Green Hornet - Set Coltelli da Lancio di Kato - MC-GH01 - coltello
Direttamente dal remake cinematografico firmato da Michel Gondry, il set di coltelli da lancio utilizzato da Kato, il fido compagno di Green Hornet (il calabrone verde). Tre pezzi, da esporre su un elegante display laccato nero. Edizione ufficiale (su licenza Columbia Pictures), limitata a 2000 pezzi e numerata progressivamente.
Lama: Acciaio 420
Lunghezza totale: 152 mm.
Larghezza lama: 73 mm.
Spessore lama: 2.5 mm.
Peso: 52 g.
Bilanciatura: centrale
Note: -11029€73.77Out of stock -
Chris Reeve - Large Sebenza 21 Inlay - Insigo Micarta - knife
Intended use: collection / sport
Type of production: Semi-craftsmanship
Blade Production: USA
Blade: Stainless steel CPM-S35VN 58 / 59HRC
Manicure: Titanium with micarta inserts
Blade Length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 210mm.
Closed thickness: 17mm.
Weight: 128g.
Closure: Frame Lock
Clip: removable, titanium
Packing: white cardboard box with Chris Reeve logos and warranty certificatesL21-1148 -
Chris Reeve - Small Sebenza 21 - Insingo Micarta
Intended Use: collection / sports
Type of production: Semi-Craft
Blade Production: USA Blade: stainless steel CPM-S35VN 58/59HRC
Handle: Titanium with polished inserts micarta
Blade length: 73mm.
Blade thickness: 3mm.
Closed Length: 98mm.
Total length: 175mm.
Thick when closed: 17mm
Weight: 82g. Closure: Frame Lock
Clip: removable titanium
Packaging: cardboard box with white logos Chris Reeve and warranty certificates
Notes: The word "Sebenza" in Zulu means "Work", while the word "Insingo" in Zulu means "Razor"0031I