Sport, Military and Collectible Knives | Coltelleria Collini

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available: No
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratory

Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: stainless steel RWL34 hardened to 59/60 HRC
Blade finish: satin finish
Handle: amber Sambar stag with 416 stainless steel guard and pommel
Blade length: 107mm.
Blade thickness: 3.5mm.
Total length: 220mm.
Weight: 181g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.

KNIFE ACQUIRED FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Excellent overall condition, with minor storage and handling marks consistent with its age
* Commercial availability: Discontinued - rare collector's model
* Sharpening: Apparently original factory edge
* Marks on blade: Minimal surface marks consistent with age; blade in excellent overall condition
* Marks on handle: Minimal surface marks consistent with age and storage
* Box: Present, original period box, with stains, yellowing and normal signs of age
* Sheath: Present, original Buck Nemo synthetic diving sheath, complete with retaining straps
* Manuals, Certificates and Warranties: Original BUCK NEMO documentation with use and maintenance instructions included
* Inspected and Certified by our in-house laboratory

The Buck 122 Nemo is one of the most fascinating and collectible knives from Buck's early production history and represents an important chapter in the development of the American brand. Introduced in 1967, the Nemo was specifically designed as a professional diving knife for divers requiring a strong, powerful and dependable tool for use in marine environments.

The Nemo design would subsequently give rise to the celebrated Buck 124 Frontiersman. During the earliest stages of production, the two models were essentially identical in terms of knife construction and were distinguished primarily by their equipment: the 122 Nemo was supplied with a dedicated synthetic diving sheath designed to be strapped to the leg, whereas the Frontiersman was marketed with a traditional leather sheath for outdoor use.

The example offered here belongs to one of the rarest and most desirable configurations within the Nemo/Frontiersman family: the early 1967 commercial production with white Teflon spacers. According to historical documentation from the Buck Collectors Club, the estimated production for this configuration was only 300-500 examples.

Its construction details are highly distinctive: a black phenolic handle, thin white Teflon spacers, a robust stainless-steel guard and the characteristic one-piece stainless-steel bird's-beak pommel, complete with a lanyard hole at the end.

The blade marking is also significant for dating the knife. The ricasso bears the simple two-line “BUCK / U.S.A.” stamp, without the 122 model number. Buck introduced systematic model-number markings only in later years, making this early configuration immediately recognizable to knowledgeable collectors.

The large plain-edge blade is made from 440C stainless steel, one of the reference steels used by Buck during this period and selected for its strong cutting performance, toughness and good corrosion resistance. Nevertheless, the Nemo's intended underwater use required particularly careful maintenance after exposure to salt water, something Buck specifically emphasized in the documentation originally supplied with the knife.

This example retains its rare original Buck Nemo diving sheath, made from rigid synthetic material and complete with adjustable straps for attachment to the diver's leg. The presence of the Nemo-specific sheath is particularly important, as it distinguishes this configuration from the contemporary Buck 124 Frontiersman.

The set also retains the original large two-piece ivory-colored Buck Knife box, typical of the earliest production period, and most importantly the rare original “BUCK NEMO” instruction sheet, in which Buck explained the characteristics of the steel and provided specific instructions for proper blade maintenance following use in water.

The knife is in excellent condition considering its age. The blade retains a very uniform satin finish and shows no evident corrosion; the handle, guard and pommel are likewise very well preserved. Only minor surface marks consistent with almost sixty years of storage and handling are visible.

The original sheath is complete and in excellent overall condition, with normal superficial signs of age. The box shows more evident staining, yellowing and storage marks, entirely consistent with its age. The original documentation is present and further enhances the historical importance and completeness of this set.

A 1967 Buck 122 Nemo with white Teflon spacers is already a highly significant piece in Buck history; finding one still accompanied by its original diving sheath, box and BUCK NEMO documentation makes this example particularly desirable for a collection dedicated to early Buck knives, American military and professional knives, or the history of diving knives.

Intended use: Professional diving / Collection
Production type: Industrial
Brand: Buck Knives
Model: 122 Nemo
Year / Variant: 1967 - White Teflon Spacers
Country of manufacture: USA
Blade: 440C stainless steel
Blade profile: Clip Point / Bowie
Edge: Plain
Blade finish: Satin
Marking: Two-line BUCK / U.S.A., without model number
Handle: Black phenolic material
Spacers: White Teflon
Guard: Stainless steel
Pommel: One-piece stainless steel, bird's-beak profile with lanyard hole
Blade length: Approx. 159mm / 6.25"
Overall length: Approx. 298mm / 11.75"
Sheath: Original Buck Nemo synthetic diving sheath with adjustable leg straps
Box: Original two-piece ivory-colored Buck Knife box
Documentation: Original BUCK NEMO instruction and maintenance sheet
Estimated production of this variant: 300-500 examples according to historical Buck Collectors Club documentation
Notes: Rare 1967 example with white Teflon spacers, previously purchased and acquired from a private collection

Sharpx Edge Fix is a Swedish-designed manual sharpener created to deliver professional results in a simple and consistent manner. Thanks to its patented Self-Adjusting Angle (SAF) system, it allows you to achieve a precise edge without requiring any experience, working in two stages: sharpening with a diamond bar and finishing with a ceramic bar. Compact, stable, and intuitive, it is the ideal solution for keeping your knives in top condition.

With an elegant and functional design, the Sharpx Edge Fix is designed to accommodate any type of knife, ensuring precise sharpening without damaging the blade. It is lightweight and compact, making it easy to store and perfect for those with limited kitchen space.

Ease of use: You don’t need to be an expert to achieve professional results.
Quality materials: Made with durable components that ensure a long product life.
Safety: Designed with a non-slip base that ensures stability during use.

KEY FEATURES
– Suitable for knives with steel blades
– Also suitable for knives with asymmetrical edges, such as sushi knives (yanagiba, deba, etc.)
– Two different sharpening angles: European (20°) or Japanese (15°)
– Patented technology with self-adjusting function (SAF, Self Adjusting Function)
– Diamond grit (#400) for sharpening and ceramic grit (#1000) for maintenance and polishing
– Large sharpening surface (1445 mm²)
– The sharpening rods slot into the base when not in use
– Silicone feet for greater stability and safety
– Self-draining function, easily washable under running water

PACKAGE CONTENTS
- Sharpening base
- 2 sharpening rods with a diamond-coated side and a ceramic side
- User manual
- Test card

TECHNICAL SPECIFICATIONS
– Product weight: 787 g
– Dimensions when closed: 46 x 143 x 143 mm
– Country of manufacture: China

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Never used, never removed from its sheath, never displayed; as it is a carbon blade and has remained in its sheath for a long time, it has unfortunately developed small spots of oxidation on the blade, which can be easily removed with a potential re-sharpening. However, it is not possible to remove the oxidation present on the passivating oxidation of the hamon. The price at which it is offered takes into account these aesthetic details, which in no way compromise its potential practical use.
* Available on the market: unique piece, entirely handmade
* Sharpening: Factory
* Marks on blade: small spots of oxidation, some potentially removable (those on the edge and tip of the blade)
* Marks on handle: None
* Box: Sold with burgundy velvet case
* Sheath: Like new, never used and never worn
* Manuals, Certificates, and Warranties: -
* Checked and Certified by our in-house laboratory

CAS Knives is the brand of Argentine brothers Claudio, Ariel, and Marcelo Sobral, artisans specializing in custom knives.

Claudio, who has been passionate about weapons since he was young, started working in a weapons factory at the age of 16, acquiring skills in forging and metalworking. In 2005, together with Ariel, he turned his passion for knives into a full-time business, which Marcelo joined in 2013, dedicating himself to the creation of sheaths. 

Renowned for their use of the San Mai technique, which combines aesthetics and functionality, the Sobrals combine creativity, craftsmanship, and dedication, working from their workshop in José León Suárez, near Buenos Aires.

Intended use: Collection

Type of production: handcrafted, entirely handmade
Blade: hand-forged San-Mai laminated steel (1095 core and 420 cheeks), with visible “hamon” — a contrasting effect created during the tempering process, which highlights the boundary of the tempered area where the cutting edge is located.
Blade finish: passivating oxidation
Country of manufacture: Argentina
Handle: Micarta with 420 stainless steel guard
Blade length: 212mm.
Blade thickness: 7 mm.
Total length: 354 mm.
Balance: advanced
Weight: 440 g.
Sheath: leather, entirely hand-stitched and engraved
Notes: knife withdrawn from private collection, previously purchased - unique piece, entirely handmade

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Like new, never removed from its original packaging
* Available on the market: Difficult to find - Limited edition of only 250 pieces
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: Present
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our in-house laboratory

The Spearpoint Vega combines precision engineering and premium materials in a superior folding knife. The lightweight and durable frame is made of finely sandblasted and polished aerospace titanium, embellished with carbon fiber inserts. The blade, made of “Wave” Damascus steel with a high-strength VG-10 cutting edge, offers versatile cutting.

The push-button locking system and stainless steel thumb stud allow for smooth one-handed opening. Every detail expresses William Henry's philosophy: combining superlative function and refined artistry. The Vega model uses hand-forged metals and exotic materials, symbolic of the William Henry collection, for an object that becomes a statement of style, designed to accompany you throughout your life.

Intended use: Collection

Type of production: MidTech
Country of production: USA
Blade: 45-layer laminated stainless steel Damascus with wave pattern and VG-10 cutting edge
Handle: Titanium with carbon fiber inserts
Blade length: 77.8mm.
Blade thickness: 2.3 mm.
Closed length: 104 mm.
Total length: 182 mm.
Weight: 59 g.
Closure: Button lock
Clip: Titanium, removable and reversible
Packaging: Wooden box with William Henry logos, cardboard outer box, certificate of authenticity
Notes: Limited edition of only 250 pieces - knife previously purchased from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private individual, previously purchased.
* Condition: Like new
* Commercially available: Commercially available.
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: -
* Scabbard: Present
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory.

The Le Thiers Artisanal Bouleau knife is a perfect blend of modern technology and traditional French craftsmanship. Designed to be ultra-light, it offers easy one-handed opening and closing. Its handcrafted production in Thiers is guaranteed by the Jurande, a corporation that guarantees respect for traditions and quality in handcrafted production, ensuring authenticity and quality.

Intended Use: Collection/Sportsman

Type of production: Handcrafted
Country of production: Laguiole, France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Satin
Handle: Olive wood
Blade length: 85mm.
Blade thickness: 2.5mm.
Length closed: 105mm.
Total length: 175mm.
Weight: 70g.
Closure: liner lock
Sheath: leather, pocket
Notes: previously purchased knife, from private collection

Jarno Movilli is a skilled cutler from Reggio Emilia, known for his unique style. His fixed blade creations are distinguished by the use of natural materials for the handles. According to the master, a knife must not only cut well and for a long time, but also arouse emotion during use.

Lui's knives, with a classic design, are ideal for hunters, fishermen and outdoor enthusiasts, as well as collectors. 

The sheaths are made of leather by the specialized company Wild Hog, also from Reggio Emilia.

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available No
* Sharpening: Original
* Marks on blade: NO
* Marks on handle: NO
*Packaging: NO
* Sheath: Leather, handcrafted
* Manuals, Certificates and Warranties: NO
* Checked and certified by our internal laboratory

Intended use: hunting / collection

Type of production: artisanal
Country of production: Italy
Blade: ATS34 steel at 60/61 HRC
Blade finish: mirror with hammering
Handle: horn tip with stabilized briar wood insert
Blade length:  90mm.
Blade thickness: 4mm.
Total length: 213mm.
Weight: 185g.
Sheath: artisanal, in leather, hand-sewn made by Wild Hog
Packaging: NO
Note:

"Have you ever met a Yipper? You know a little dog that barks like the king of the prairie, but actually weighs less than a hamburger? A fierce puppy whose barking is worse than its bite! Here-I grew up in an area where coyotes yelp and howl at night. Their call is a bit eerie, perhaps frightening, but they are like those barking puppies: much ado about nothing. So when Igor Bortolussi of MKM asked me to design a knife, I started to design a knife that was a yipper: sharp teeth, but compassed appearance. An EDC knife that despite its name does what it's supposed to do and does it damn well!" - Ben Petersen

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: CPM-MagnaCut steel 
Blade treatment: Black Top Shield Coating
Handle: G10 with embedded stainless steel liners
Blade Length: 72mm.
Blade thickness: 2.5mm.
Length closed: 98mm.
Total length: 173mm.
Thickness when closed: 13mm.
Weight: 65g.
Closure: CrossBar Lock (AXIS Lock Modified)
Clip: stainless steel, deep pocket, removable and reversible
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Ben Petersen

"I designed the Pocket Tango to be your everyday dance partner, a pocket knife with agility and grace and the skill to be at your side at all times. The two blade shapes complement each other and the handles are gorgeous and comfortable. With the MKM magnetic sheath to complete the package, I couldn't be happier!" - David C. Andersen

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Maniago - Italy
Blade: full tang in CPM-MagnaCut steel
Blade treatment: Stone washed
Handle: Micarta
Blade length: 74mm.
Total length: 170mm.
Blade thickness: 3mm.
Weight: 72g.
Sheath: black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos. 
Notes: Design by David C. Andersen

"I designed the Pocket Tango to be your everyday dance partner, a pocket knife with agility and grace and the skill to be at your side at all times. The two blade shapes complement each other and the handles are gorgeous and comfortable. With the MKM magnetic sheath to complete the package, I couldn't be happier!" - David C. Andersen

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Maniago - Italy
Blade: full tang in CPM-MagnaCut steel
Blade treatment: Stone washed
Handle: G10
Blade length: 74mm.
Total length: 170mm.
Blade thickness: 3mm.
Weight: 72g.
Sheath: black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos. 
Notes: Design by David C. Andersen

The blade shapes of this new folding knife designed by Jesper Voxnaes are reminiscent of ancient times when pirates sailed the seas with their precious swords at their side, maestone and ready to accomplish any task! The blade is CPM-MagnaCut hardened to 60/62HRC with stonewashed treatment and micarta handle to combine grip with aesthetics.

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: CPM-MagnaCut steel 
Blade treatment: Stonewashed
Handle: micarta, with embedded stainless steel liners and anodized titanium spacer
Blade length: 62mm.
Blade thickness: 3.2mm.
Length closed: 106mm.
Total length: 175mm.
Thickness when closed: 13mm.
Weight: 104g.
Closure: LinerLock
Clip: stainless steel, removable and reversible
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jesper VOX Voxnaes

The blade shapes of this new folding knife designed by Jesper Voxnaes are reminiscent of ancient times when pirates sailed the seas with their precious swords at their side, maestone and ready to accomplish any task! The blade is CPM-MagnaCut hardened to 60/62HRC with stonewashed treatment and micarta handle to combine grip with aesthetics.

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: CPM-MagnaCut steel 
Blade treatment: Stonewashed
Handle: micarta, with embedded stainless steel liners and anodized titanium spacer
Blade length: 62mm.
Blade thickness: 3.2mm.
Length closed: 106mm.
Total length: 175mm.
Thickness when closed: 13mm.
Weight: 104g.
Closure: LinerLock
Clip: stainless steel, removable and reversible
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jesper VOX Voxnaes

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No.
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratory

Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: stainless steel RWL34 hardened to 59/60 HRC
Blade finish: satin finish
Handle: amber Sambar stag with 416 stainless steel guard and pommel
Blade length: 107mm.
Blade thickness: 3.5mm.
Total length: 220mm.
Weight: 181g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: 03/1990 model, in like-new condition
* Commercially available: Unique knife, entirely custom made and hand-engraved
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks of time.
* Manuals, Certificates and Warranties: Certificate of authenticity with date of manufacture and craftsman's signature.
* Checked and Certified by our in-house workshop

Intended Use: Collection/Gentleman

Type of production: Handcrafted
Country of Production: Germany
Blade: stainless steel CPM-T440V at 60HRC
Blade finish: mirror polish
Handle: integral from solid, fully hand-engraved, with fossil ivory grips and red micarta spacers
Blade length: 93mm
Blade thickness: 4mm.
Total length: 203mm.
Weight: 99g.
Sheath: Leather
Packaging: -
Notes: rare handcrafted knife made in March 1990 by well-known German knifemaker Peter Herbs, a member of the German Knifemakers' Guild and a member of the very prestigious American Knifemakers' Guild.

Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.

The blade is made of Bohler M390 satin-finished steel, with an hawkbill tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with flipper or thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper Voxnaes

Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.

The blade is made of Bohler M390 satin-finished steel, with a cleaver tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper Voxnaes

The blade shapes of this new folding knife designed by Jesper Voxnaes are reminiscent of ancient times when pirates sailed the seas with their precious swords at their side, maestone and ready to accomplish any task! The blade is BOHLER N690Co with black Black Top Shield cover and G10 handle for the best possible grip.


Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: N690Co 58/60HRC stainless steel
Blade treatment: Black Top Shield
Handle: G10, with embedded stainless steel liners and anodized aluminum spacer
Blade length: 62mm.
Blade thickness: 3.2mm.
Length closed: 106mm.
Total length: 175mm.
Thickness when closed: 13mm.
Weight: 100g.
Closure: LinerLock
Clip: stainless steel, removable and reversible
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jesper VOX Voxnaes

FLAME LIGHT, practical folding knife and now even lighter!

BOHLER M390 dark stone washed steel dagger point blade, flipper opening with ball bearing rotation mechanism and Liner lock system. Stonewashed stainless steel spacer and clip, stainless steel hardware and ring on bronze anodized titanium center pin. Black canvas micarta handle. Sold with zippered nylon sheath and belt loop.

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: Bohler M390 stainless steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 72mm.
Blade thickness: 2.5mm.
Total length: 176mm.
Weight: 55g.
Opening: Carson Flipper system
Washers: steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Sheath: cordura
Packaging: Cardboard box with MKM logos
Notes: Design by Michael Zieba

Intended Use: Sporting

Type of production: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: marbled carbon fiber grips, titanium liners and heads
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 170g.
Length when closed: 130mm.
Total length: 215mm.
Closure: Back Lock
Clip: titanium, removable, deep pocket type
Sheath: synthetic pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos 
Notes: Design by Tommaso Rumici

Eclipses indicate significant periods of change and transformation.
While a solar eclipse opens the portal to new beginnings and changes,
a lunar eclipse reveals energies that help us complete a journey or change course in some way...
Either way, follow the light beyond the darkness!

Intended Use: Sporty

Production type: Industrial
Country of manufacture: Italy
Blade: MagnaCut steel HRC 61/63
Blade treatment: Satin finish
Handle: Titanium Gr.5 Ti6AI4V Dask Stonewash
Blade length: 81mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 191mm.
Weight: 90g.
Closure: FrameLock
Clip: titanium, deep pocket, removable
Sheath: zippered nylon pouch
Packaging: cardboard box with MKM logos
Notes: Design by Jesper Voxnaes

Eclipses indicate significant periods of change and transformation.
While a solar eclipse opens the portal to new beginnings and changes,
a lunar eclipse reveals energies that help us complete a journey or change course in some way...
Either way, follow the light beyond the darkness!

Intended Use: Sporty

Production type: Industrial
Country of manufacture: Italy
Blade: MagnaCut steel HRC 61/63
Blade treatment: Dark Stonewashed
Handle: Titanium Gr.5 Ti6AI4V Dark Stonewashed with anodizing
Blade length: 81mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 191mm.
Weight: 90g.
Closure: FrameLock
Clip: anodized titanium, deep pocket, removable
Sheath: zippered nylon pouch
Packaging: cardboard box with MKM logos
Notes: Design by Jesper Voxnaes

THE MAGIC BUTTON FOR HAPPINESS
Did you always think that happiness could not be achieved by simply pressing a button? You were wrong!

Don't confuse it with an assisted-opening or snap-open knife, it's a manual-opening knife that glides super smoothly thanks to a ball-bearing system, but Miura is above all a unique product in the industry thanks to the combination of the button lock type system combined with an integral handle made from solid machined titanium, features that together have never before been seen in industrial knives. These features, along with its fantastic design, led the Miura to win the 2022 Blade Show Imported Knife of the Year award in Atlanta.




Intended Use: Sporting

Type of production: Industrial
Country of Production: Italy
Blade: Bohler M390 Microclean stainless steel hardened to 58/60HRC 
Blade finish: Satin finish
Handle: Titanium Gr. 5 Ti6AI4V with 3D machining, CNC machined from billet
Blade length: 69mm.
Blade thickness: 3mm.
Total length: 169mm.
Weight: 72g.
Closure: Button Lock
Clip: titanium, removable and reversible, machined from billet
Packaging: zippered nylon pouch and cardboard box with MKM Maniago Knife Makers logos
Notes: manual opening system, on ball bearings - Winner at the Atlanta 2022 Blade Show as Imported Knife of the Year

We advise our customers that discountische Loyalty are not active for this product

THE MAGIC BUTTON FOR HAPPINESS
Did you always think that happiness could not be achieved by simply pressing a button? You were wrong!

Don't confuse it with an assisted-opening or snap-open knife, it's a manual-opening knife that glides super smoothly thanks to a ball-bearing system, but Miura is above all a unique product in the industry thanks to the combination of the button lock type system combined with an integral handle made from solid machined titanium, features that together have never before been seen in industrial knives. These features, along with its fantastic design, led the Miura to win the 2022 Blade Show Imported Knife of the Year award in Atlanta.




Intended Use: Sporting

Type of production: Industrial
Country of Production: Italy
Blade: Bohler M390 Microclean stainless steel hardened to 58/60HRC 
Blade finish: Satin finish
Handle: Titanium Gr. 5 Ti6AI4V with 3D machining, CNC machined from billet
Blade length: 69mm.
Blade thickness: 3mm.
Total length: 169mm.
Weight: 72g.
Closure: Button Lock
Clip: titanium, removable and reversible, machined from billet
Packaging: zippered nylon pouch and cardboard box with MKM Maniago Knife Makers logos
Notes: manual opening system, on ball bearings - Winner at the Atlanta 2022 Blade Show as Imported Knife of the Year

We advise our customers that discountische Loyalty are not active for this product

Intended Use: Sporting

Production type: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: G10 grips , titanium liners and bolsters
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 175g.
Length when closed: 130mm.
Total length: 215mm.
Closure: BackLock
Clip: titanium, removable, deep pocket type
Scabbard: synthetic pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos 
Notes: Design by Tommaso Rumici

FLAME LIGHT, practical folding knife and now even lighter!

BOHLER M390 dark stone washed steel dagger point blade, flipper opening with ball bearing rotation mechanism and Liner lock system. Stonewashed stainless steel spacer and clip, stainless steel hardware and ring on bronze anodized titanium center pin. Black canvas micarta handle. Sold with zippered nylon sheath and belt loop.

Intended Use: Sporting


Type of production: Industrial
Country of manufacture: Italy
Blade: Bohler M390 stainless steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 72mm.
Blade thickness: 2.5mm.
Total length: 176mm.
Weight: 55g.
Opening: Carson Flipper system
Washers: steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Sheath: cordura
Packaging: Cardboard box with MKM logos
Notes: Design by Michael Zieba

Intended Use: Sporting/EDC

Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: canvas micarta and titanium grips, titanium spacers and screws
Blade length: 86mm.
Blade thickness: 4mm.
Weight: 116g.
Length when closed: 115mm.
Total length: 197mm.
Locking mechanism: Framelock
Clip: titanium, removable, deep pocket type.
Sheath: Synthetic material pouch with zipper closure and belt loop
Package: Cardboard box with MKM Maniago Knife Makers logos 
Notes: Tungsten carbide rear glass breaker - Design by Bob Terzuola

Intended Use: Sporting/EDC

Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: canvas micarta and titanium grips, titanium spacers and screws
Blade length: 86mm.
Blade thickness: 4mm.
Weight: 116g.
Length when closed: 115mm.
Total length: 197mm.
Closure: Framelock
Clip: titanium, removable, deep pocket type.
Scabbard: Synthetic material pouch with zipper closure and belt loop
Package: Cardboard box with MKM Maniago Knife Makers logos 
Notes: Tungsten carbide rear glass breaker - Design by Bob Terzuola

GOCCIA packs a sleek look into a sturdy frame with incredible ergonomics.

With this design by Jens Anso we would like to pay homage to one of the essential elements that gave rise to the production of knives in Maniago, the water, which in 1453 moved the hammers to forge the first blades and which has guided the evolution of our craft tradition. The concentric ellipses worked in 3D on the handle recall the ripples created by a drop falling into the water, forms and moments of liquid energy: origin and propagation of water.

Intended Use: Sporting

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M360 61HRC
Blade treatment: satin finish
Handle: Bronze anodized titanium with stonewashed titanium spacer
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed: 15mm
Weight: 135g.
Closure: LinerLock
Clip: stonewashed titanium, deep pocket, removable
Scabbard: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jens Anso

GOCCIA packs a sleek look into a sturdy frame with incredible ergonomics.

With this design by Jens Anso we would like to pay homage to one of the essential elements that gave rise to the production of knives in Maniago, the water, which in 1453 moved the hammers to forge the first blades and that has guided the evolution of our craft tradition. The concentric ellipses worked in 3D on the handle recall the ripples created by a drop falling into the water, forms and moments of liquid energy: origin and propagation of water.

Intended Use: Sporting

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M360 61HRC
Blade treatment: satin finish
Handle: G10, with stainless steel embedded liners and anodized titanium spacer
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 115mm.
Total lenght: 200mm.
Thickness when closed: 15mm
Weight: 110g.
Closure: LinerLock
Clip: anodized titanium, deep pocket, removable
Sheath: Nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jens Anso

GOCCIA packs a sleek look into a sturdy frame with incredible ergonomics.

With this design by Jens Anso we would like to pay homage to one of the essential elements that gave rise to the production of knives in Maniago, Water, which in 1453 moved the hammers to forge the first blades and which has guided the evolution of our craft tradition. The concentric ellipses worked in 3D on the handle recall the ripples created by a drop falling into the water, forms and moments of liquid energy: origin and propagation of water.

Intended Use: Sporting

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M360 61HRC
Blade treatment: Satin finish
Handle: Micarta, with stainless steel embedded liners and titanium spacer
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed: 15mm
Weight: 110g.
Closure: LinerLock
Clip: Titanium, deep pocket, removable
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jens Anso

Magnetic closure pocket sheath realized by the Genuine Italian Vegetable Tanned Leather Consortium: a handicraft product of a centenary Tuscan tradition, accompanied by a numbered certificate of guarantee.

Thanks to the magnets placed on the back of the sheath and on the closing flap, it allows you to carry your knives without clips comfortably in your pocket, or you can use it with a belt holder with all the convenience of being able to attach it without removing the belt.

Kind of production: Handmade
Country of Production: Italy
Material: Genuine vegetable tanned leather
External measures: 120mm. x 50mm.
Internal measures: 90mm. x 35mm.
Type of closure: magnetic, bi-directional
Weight: 60g.

Magnetic closure pocket sheath realized by the Genuine Italian Vegetable Tanned Leather Consortium: a handicraft product of a centenary Tuscan tradition, accompanied by a numbered certificate of guarantee.

Thanks to the magnets placed on the back of the sheath and on the closing flap, it allows you to carry your knives without clips comfortably in your pocket, or you can use it with a belt holder with all the convenience of being able to attach it without removing the belt.

Kind of production: Handmade
Country of Production: Italy
Material: Genuine vegetable tanned leather
External measures: 120mm. x 50mm.
Internal measures: 90mm. x 35mm.
Type of closure: magnetic, bi-directional
Weight: 60g.

Intended Use: Sporty / Gentleman / EDC

Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: Satin
Handle: Aluminium
Blade length: 76mm.
Blade thickness: 2.5mm.
Length closed: 102mm.
Total lenght: 174mm.
Thickness when closed: 12mm.
Weight: 53g.
Opening: two hands
Washers: Brass
Closure: Slip Joint
Clip: -
Scabbard: leather, with belt loop with magnetic release
Package: Cardboard box with logos MKM Maniago Knife Makers
Notes: Design by Bruno Bruna Graciut, Master CIC (Italian Knife Makers Guild)

Intended Use: Sporty / Gentleman / EDC

Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: Satin
Handle: Aluminium
Blade length: 76mm.
Blade thickness: 2.5mm.
Length closed: 102mm.
Total lenght: 174mm.
Thickness when closed: 12mm.
Weight: 53g.
Opening: two hands
Washers: Brass
Closure: Slip Joint
Clip: -
Scabbard: leather, with belt loop with magnetic release
Package: Cardboard box with logos MKM Maniago Knife Makers
Notes: Design by Bruno Bruna Graciut, Master CIC (Italian Knife Makers Guild)

Intended Use: Sporting

Production type: Industrial
Country of Production: Italy
Blade: Bohler M390 stainless steel
Blade finish: Black PVD
Handle: Titanium PVD and Fat Carbon Red Lava
Blade length: 72mm.
Blade thickness: 2.5mm.
Total length: 176mm.
Weight: 61g.
Opening: Carson Flipper system
Washers: steel, with ball bearings
Closure: Frame Lock
Clip: PVD stainless steel, removable and reversible
Sheath: cordura
Packaging: Cardboard box with MKM logos
Notes: Design by Michael Zieba

A rippled surface, a wide loop, the crest of a wave: with its clear and harmoniously multifaceted design, Timavo suggests the multiple forms of flowing. - Knife made by Viper

Intended use: Sports

Type of production: Industrial
Country of production: Italy
Blade: M390 58 / 60HRC stainless steel
Blade treatment: Stonewashed
Handle: Stainless steel and Green Canvas Micarta
Blade length: 68mm.
Blade thickness: 3mm.
Total length: 183mm.
Weight: 110g.
Closing: Liner Lock
Clip: stainless steel, flush
Packaging: nylon pouch with zip and cardboard box with MKM Maniago Knife Makers logos
Notes: Carson Flipper opening system on ball bearings - Design by Jesper Voxnaes

Small and compact, but with an impetuous personality, with its shots, with its curves and counter-curves, Isonzo is inspired by the magnificent river that breaks into the gates of the eastern Alps - Knife made by Fox

Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690 59 / 60HRC
Blade treatment: Stonewash
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: Carson Flipper system with ball bearing rotation mechanism
Spacer: in anodised aluminum
Clip: in steel
Sheath: -
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper Voxnaes

Small and compact, but with an impetuous personality, with its shots, with its curves and counter-curves, Isonzo is inspired by the magnificent river that breaks into the gates of the eastern Alps - Knife made by Fox

Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690 59 / 60HRC
Blade treatment: Stonewash
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: Carson Flipper system with ball bearing rotation mechanism
Spacer: in anodised aluminum
Clip: in steel
Sheath: -
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper Voxnaes

Intended use: Sports / EDC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Handle: front of marbled carbon fiber with titanium insert Gr. 5 Ti6AI4V, rear in titanium Gr. 5 Ti6Al4V, all worked in 3D
Blade length: 84mm.
Total length: 203mm.
Blade thickness: 4mm.
Weight: 112g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Knife manufactured by Viper

Folding knife made by Viper, with BÖHLER M390 MICROCLEAN steel blade, stonewash finish, Fliipper opening system, rotation mechanism with ball bearings. Hybrid locking system, hidden and elegant like a liner lock and at the same time thick and resistant as a frame lock. Titanium spacer and stainless steel screws.

Intended use: Sports / EDC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: Stonewashed
Handle: G10 and Titanium
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 117mm.
Total length: 203mm.
Thick when closed: 13.3mm.
Weight: 130g.
Opening: Carson Flipper system
Washers: in steel and bronze, with ball bearings
Closure: Sub FrameLock
Clip: titanium, removable
Sheath: nylon pouch with zip and belt loops
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Lucas Burnley - Knife manufactured by Viper