Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

The Fallkniven H1 knife is a very handy knife with impressive strength. The H1 is our first true hunting knife and encapsulates the history of Nordic Scandinavian cutlery art. Because of this heritage, the H1 does not have a standard finger guard, but grip security is improved by the ergonomic thermorun plastic handle.

The special design of the H1 blade is used to work game while hunting. The H1 knife may look different, but it works very well. In many ways, the performance of a knife depends on the person holding it. Knowing where and how to properly carve game goes beyond the knife. Hunters must avoid wrong cuts, keep hair off the meat, avoid cutting organs, and minimize blood flowing onto the game and the hunter. The combination of an experienced hunter and a well-designed knife is unbeatable!

Intended use: hunting

Type of production: Industrial
Country of manufacture: Sweden
Blade: Elmax SuperClean stainless steel at 61/62HRC
Blade finish: Satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 210mm.
Balance: backward
Weight: 175g.
Sheath: made of Zytel
Packaging: white cardboard case with Fallkniven logos
Notes: -

Fällkniven AB celebrates its 40th anniversary in the international knife market with The Fällkniven Phantom model, a folding knife that is not only aesthetically appealing but also functional, with well-balanced proportions between handle and blade.

The blade uses advanced Swedish powdered steel (Elmax from Uddeholm), equipped with a convex edge for maximum performance. The handle is made of ironwood harvested in the southwestern United States, known for its density (1.2 kg/dm³) that makes it heavy and strong enough not to float.

The design of the Phantom follows the Scandinavian principle of "Form follows function," favoring clean, classic lines without superfluous details. 

The Phantom comes in a gift box with a multifunctional leather case with a belt clip that can be worn either horizontally or vertically.

Intended use: sports/hunting/utility

Blade: 61/62HRC Elmax stainless steel, satin-finished, with convex sharpening
Handle: stainless steel and desert ironwood
Blade length: 73mm.
Blade thickness: 3mm.
Length when closed: 101mm.
Total length: 174mm.
Weight: 77g.
Locking system: Liner Lock
Sheath: leather, with metal clip
Notes: limited edition to celebrate 40 years of the company's business sold in cardboard case

Fällkniven AB celebrates its 40th anniversary in the international knife market with a special version of its bestseller, the F1 Pilot survival knife, now made of high-quality Swedish steel (Elmax). This special model originates from 1987, when the Swedish Air Force commissioned Fällkniven to develop a new survival knife for the technical environment of the JAS 39 Griffin system.

The first delivery of thousands of F1 knives to the Swedish Armed Forces took place in August 1995, and sales to the civilian market began the following year. The success was remarkable: Fällkniven introduced an innovative philosophy for survival knives, in stark contrast to the outdated technologies that had dominated the development of combat and survival knives since World War II.

Intended use: allrounder utility 

Blade: Elmax stainless steel at 61/62HRC, satin-finished, with convex sharpening
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: backward
Weight: 149g.
Sheath: zytel, with anti-extraction safety
Notes: limited edition to celebrate 40 years of the company's business sold in cardboard box with DC4 diamond sharpener

Intended use: Hiking / Utility

Production type: industrial
Country of production: Japan
Blade: hidden tang, Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Thermorun
Blade length: 80mm.
Blade thickness: 4.8mm.
Total length: 181mm.
Balance: set back 2cm. from the guard branch
Weight: 132g.
Scabbard: zytel
Notes: Sharpening convex type

Intended use: Collection

Type of production: Artisan by CIC Master Sergio Consoli
Production Lama: Italy
Blade: In spirograph damascus steel
Blade treatment: -
Handle: bronze bolsters, timascus with titanium spacers
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 225mm.
Weight: 243g.
Closure: Liner Lock
Clip: titanium
Notes: Handmade by Master Sergio Consoli - knife number 454 made in 2018

Acknowledgments

Currently I make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:

in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded as "best table on display"

always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"

I was also ranked second in the competition organized by the magazine LAME D'AUTORE as the best fixed hunting blade

then in 2007 at "Scarperia" I won the third prize for best folding

but above all again in 2007, to my great satisfaction, I reached the degree of MASTER OF THE ITALIAN KNIVING CORPORATION, a recognition received at the first exam.

Presentation of the craftsman

Creating a knife by hand is what I consider a real art form.
The satisfaction of seeing an object that comes from one's own hands, that takes shape and reaches mechanical, artistic and aesthetic perfection is what pays me back the most for all the hours of work and effort it takes to create a knife completely. by hand.

The passion for "cutting tools" has always been in me since I was a child and grew with me until the almost sudden decision to build my first knife myself, it was a "need", almost an inner necessity that I couldn't put off, my hands and my mind had to start creating, of course, what I had always been passionate about ... the knife!

I started at 40, in 2003, practically self-taught, I had no experience of manual work, but I had been a mechanical designer for many years and this allowed me to perfectly know the technique and all the various stages of mechanical processing.

Currently I am a member, with the rank of Master, which is the highest, of the Italian Knives Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.

What I do now is what I consider my art form ..., to create "handcrafted, hunting and collectible knives".

They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
I mainly make folding knives, which satisfy my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they are not seen, is what distinguishes a knife created by hand, from one made industrially .

The mechanics then must be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.

Of course, over the years I have refined my technique and currently I have improved the mechanics even more by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction. and with an incredible sweetness.

With regard to the blades then, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow an exceptional edge hold and cutting quality for all types of use.

I make practically all the knives on an initial design of mine, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "artisanal".

Regarding the materials I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damascus, both stainless steel and carbon, for the uniqueness 'that give the knife, since each damask is always different from another.

For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of wonderful colors, I also use fossil mammoth ivory, various briars, titanium and carbon fiber.

Most of the knives, however, are made entirely of steel, in order to then be engraved, always and strictly by hand, to transform the knife even more into a real work of art ...

Blade: Full tang carbon steel
Conformation: Dui Chirra
Kauri: covered
Aunlo-Bal: -
Handle: wood
Blade length: 310mm.
Blade thickness: 6.5mm.
Total length: 435mm.
Karda: -
Chakmak: -
Weight: 760g.
Sheath: in wood and leather
Notes: Original Nepalese knife entirely handmade

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in zytel
Note: -

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in kydex
Note: -

Warning: as these are handmade products, there may be variations with respect to the following and displayed in the picture below.

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: wood
Finishes: Brass
Blade length: 250 mm.
Blade thickness: 10 mm.
Total length: 380 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Weight: 468g. (602g with scabbard)
Sheath: in leather and wood
Notes: Original Nepalese knife entirely handmade

Warning: as these are handmade products, there may be variations with respect to the following and displayed in the picture below.

Blade: Carbon steel, with incisions
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: wood engraved
Finishes: Brass
Blade length: 160 mm.
Blade thickness: 8 mm.
Overall length: 280 mm.
Karda: 55 mm.
Chakmak: 55 mm.
Weight: 224g. (308g inclusive sheath)
Sheath: engraved wood and brass
Notes: Original Nepalese knife entirely handmade

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Manicure: wood
Finishes: Brass
Blade length: 260 mm.
Blade thickness: 9.4 mm.
Total length: 400 mm.
Karda: 110 mm.
Chakmak: 110 mm.
Weight: 426g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by hand

Lame: acier au carbone
Conformation: Dui Chirra
Kauri: Découverte
Aunlo-Bal: des motifs en noir et or gravé d'un dessin d'un soleil
Poignée: Bois
Finitions: laiton
Longueur de la lame: 225 mm.
Épaisseur de la lame: 8,5 mm.
Longueur totale: 355 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Poids: 350g.
Gaine: cuir et bois
Notes: couteau d'origine népalaise fait entièrement à la main

Blade: Carbon Steel
Handle: horn
Blade length: 225 mm.
Blade Thickness: 10 mm.
Overall length: 350 mm.
Weight: without covers g. 375 - g with sheath. 504
Sheath: leather and wood, handmade
Notes: every knife and 'entirely handmade in Nepal and also includes two small knives.

Blade: Carbon Steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: Wood
Finishes: Brass
Blade length: 270 mm.
Blade Thickness: 10 mm.
Overall length: 400 mm.
Karda: 105 mm.
Chakmak: 105 mm.
Weight: 434g.
Sheath: leather and wood
Notes: Nepalese original knife made entirely by hand

Lame: acier au carbone
Conformation: Dui Chirra
Kauri: Découverte
Aunlo-Bal: des motifs en noir et or gravé d'un dessin d'un soleil
Poignée: Bois
Finitions: laiton
Longueur de la lame: 225 mm.
Épaisseur de la lame: 8,5 mm.
Longueur totale: 355 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Poids: 350g.
Gaine: cuir et bois
Notes: couteau d'origine népalaise fait entièrement à la main

Blade: Carbon Steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: engraved patterns in black and gold with a drawing of a sun
Handle: Wood
Finishes: Brass
Blade length: 225 mm.
Blade Thickness: 8.5 mm.
Overall length: 355 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Weight: 350g.
Sheath: leather and wood
Notes: Nepalese original knife made entirely by hand

Blade: Carbon Steel
Conformation: Dui Chirra
Kauri: Covered
Aunlo-Bal: -
Handle: Wood
Blade length: 230mm.
Blade Thickness: 11mm.
Overall length: 395mm.
Karda: horn length. tot. 12mm.
Chakmak: horn length. tot. 12mm.
Weight: 690g.
Sheath: wood and leather
Notes: Nepalese original knife made entirely by hand

Kukri Artisan - Panawal horn - Nepalese knife

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn
Blade length: 200mm.
Blade thickness: 9mm.
Overall length: 320mm.
Karda: horn length. tot. 6.5mm.
Chakmak: horn length. tot. 6.5mm.
Weight: 482g.
Sheath: wood and leather
Notes: Original Nepalese knife made entirely by hand

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn
Blade length: 200mm.
Blade Thickness: 8mm.
Overall length: 320mm.
Karda: horn length. tot. 6.5mm.
Chakmak: horn length. tot. 6.5mm.
Weight: 434g.
Sheath: wood and leather decorated
Notes: Knife Original Nepalese entirely handmade - 7 accessories included in the sheath

Kukri Artisan - Dhankute Silver - Nepalese knife

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn and silver
Blade length: 320mm.
Blade Thickness: 10mm.
Overall length: 440mm.
Karda: length. tot. 6.3mm.
Chakmak: length. tot. 6.3mm.
Weight: ì (774g. Sheath)
Sheath: horn and Nepalese symbols silver
Notes: Original Nepalese knife made entirely by hand

Kukri Artisan - Dhankute 11 "horn - Nepalese knife

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn and brass
Blade length: 220mm.
Blade Thickness: 8mm.
Overall length: 340mm.
Karda: horn length. tot. 65mm.
Chakmak: horn length. tot. 65mm.
Weight: 434g.
Sheath: Nepalese brass horn with symbols
Notes: Original Nepalese knife made entirely by hand

Lama: Acciaio al carbonio
Conformazione: Lama full tang
Kauri: Scoperto
Aunlo-Bal: singola linea nera incisa
Manicatura: Corno nero di bufalo 
Finiture: -
Lunghezza lama: 250 mm.
Spessore della lama: 6 mm.
Lunghezza totale: 375 mm.
Peso: 680g.
Fodero: in cuoio e legno
Note: Coltello originale nepalese interamente realizzato a mano

Warning: as these are handmade products, there may be variations with respect to the following and displayed in the picture below.

Blade: Carbon steel, with incisions
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: wood engraved
Finishes: Brass
Blade length: 160 mm.
Blade thickness: 8 mm.
Overall length: 280 mm.
Karda: 55 mm.
Chakmak: 55 mm.
Weight: 224g. (308g inclusive sheath)
Sheath: engraved wood and brass
Notes: Original Nepalese knife entirely handmade

Kukri Artisan - Ceremonial Long Aluminum 027 - knife

Blade: Carbon steel fully engraved with motifs of dragons (warning: may vary from those shown in photos)
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: aluminum
Finishes: Brass
Blade length: 455 mm.
Blade Thickness: 12 mm.
Overall length: 650 mm.
Karda: 210 mm.
Chakmak: 210 mm.
Weight: 1675g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by hand

Kukri Artisan - Ceremonial Long Aluminum 027 - knife

Blade: Carbon steel fully engraved with motifs of dragons (warning: may vary from those shown in photos)
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: aluminum
Finishes: Brass
Blade length: 455 mm.
Blade Thickness: 12 mm.
Overall length: 650 mm.
Karda: 210 mm.
Chakmak: 210 mm.
Weight: 1675g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by hand

Kukri - World War II Gurkha

Arma nazionale del Nepal e dei suoi guerrieri Gurkha, si distingue per la sua lama ricurva affilata nel latoconcavo e per lo spostamento del peso verso la punta che consente fendenti molto efficaci. L’impugnatura è diritta, senzaguardia. Caratteristico il ricasso (kauri) e il fodero di legno ricoperto di cuoioin cui sono contenuti anche due piccoli coltelli (karda e chakmak).

Lama: Acciaio al carbonio
Manicatura: Legno - ATTENZIONE, trattandosi di un prodotto artigianale la colorazione del manico può variare rispetto al modello fotografato
Lunghezza lama: 250 mm.
Spessore della lama: 11 mm.
Lunghezza totale: 405 mm.
Peso: -- g.
Fodero: in cuoio con trattamento camouflage e legno, realizzato a mano
Note: ogni coltello e' interamente realizzato a mano in Nepal e comprende anche due piccoli coltelli.

Blade: carbon steel
Structure: Dui Chirra
Kauri: uncovered
Handle: carved wood
Finishing: brass
Blade Length: 210 mm.
Blade Thickness: 8 mm.
Total Length: 310 mm.
Karda: 75 mm.
Chakmak: 75 mm.
Weight: 186g.
Sheath: leather and brass
Notes: original nepalese knife, totally handmade 

Blade: 61HRC RWL34 Stainless Steel
Handle: Walnut, Damascus and Titanium
Blade Lenght: 75mm.
Blade Thickness: 4mm.
Overall Lenght: 180mm.
Weight: 110g.
Lock: Liner lock
Clip: -
Sheath: -
Notes: Handmade in Italy by CIC Master Sergio Consoli

Kukri - Gurkha Army

Nepal's national weapon and its Gurkha warriors are distinguished by their sharp curved blade in the lathe and the weight shift towards the tip that allows very effective gaiters. The grip is straight, no guard. Characteristic is the ricotta (kauri) and the leather sheath covered with two small knives (karda and chakmak).

Blade: Carbon steel
Manicure: black polished horn
Blade length: 265 mm.
Blade thickness: 10 mm.
Total length: 390 mm.
Weight: g.
Sheath: leather and wood, handmade
Notes: Every knife is handmade in Nepal and also includes two small knives.

Intended Use: edc / sports

Blade: Stainless Steel San-Mai "Super Gold Powder" 62 HRC
Handle: Zytel
Blade length: 52 mm.
Blade Thickness: 2 mm.
Total length: 120 mm.
Weight: 26 g.
Closure: BackLock

NOTA: Trattandosi di prodotti artigianali, i prodotti a nostra disposizione potrebbero lievemente differire dal punto di vista estetico rispetto a quello presente in foto

Lama: Acciaio al carbonio
Conformazione: Dui Chirra
Kauri: Scoperto
Aunlo-Bal: motivi incisi in nero e oro con un disegno di un sole
Manicatura: Corno nero di bufalo lucidato ed inciso
Finiture: Ottone
Lunghezza lama: 205 mm.
Spessore della lama: 8.5 mm.
Lunghezza totale: 320 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Peso: 350g.
Fodero: in cuoio e legno
Note: Coltello originale nepalese interamente realizzato a mano

Blade: carbon steel
Structure: Dui Chirra
Kauri: uncovered
Handle: carved wood
Finishing: brass
Blade Length: 210 mm.
Blade Thickness: 8 mm.
Total Length: 310 mm.
Karda: 75 mm.
Chakmak: 75 mm.
Weight: 186g.
Sheath: leather and brass
Notes: original nepalese knife, totally handmade 

Lama: Acciaio al carbonio completamente incisa con motivi di draghi (attenzione: possono variare rispetto a quanto visualizzato in foto)
Conformazione: Dui Chirra
Kauri: Scoperto
Aunlo-Bal: -
Manicatura: Legno inciso
Finiture: Ottone
Lunghezza lama: 455 mm.
Spessore della lama: 12 mm.
Lunghezza totale: 630 mm.
Karda: 210 mm.
Chakmak: 210 mm.
Peso: 1275g.
Fodero: in cuoio e legno
Note: Coltello originale nepalese interamente realizzato a mano

Lama: Acciaio al carbonio
Conformazione: Dui Chirra
Kauri: Coperto
Aunlo-Bal: Motivi incisi neri e dorati con una stella a 5 punte
Manicatura: corno
Finiture: Ottone
Lunghezza lama: 325 mm.
Spessore della lama: 11 mm.
Lunghezza totale: 470 mm.
Karda: 115 mm.
Chakmak: 115 mm.
Peso: 562g.
Fodero: in cuoio e legno
Note: Coltello originale nepalese interamente realizzato a mano

Lama: Acciaio al carbonio
Conformazione: Dui Chirra
Kauri: coperto
Aunlo-Bal: disegno inciso nero e oro
Manicatura: legno e ottone
Lunghezza lama: 260mm.
Spessore della lama: 11mm.
Lunghezza totale: 400mm.
Karda: lungh. tot. 55mm.
Chakmak: lungh. tot. 55mm.
Peso: 414g. (574g. con fodero)
Fodero: in ottone e legno
Note: Coltello originale nepalese interamente realizzato a mano