Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Ka-Bar - TDI Pocket Strike - Karambit Knife - 2491 - knife
Intended use: Tactical / EDC
Production type: Industrial
Country of manufacture: Taiwan
Blade: Full tang in AUS-8 57/59HRC stainless steel
Blade finish: Powder coated
Handle: Zytel
Blade length: 80mm.
Blade thickness: 3.7mm.
Total length: 197mm.
Weight: 117g. (172g. with sheath)
Sheath: ABS with clip
Notes: -KB-2491 -
Ka-Bar BK&T - Becker Harpoon Black Survival Knife - BK18BK - knife
Intended Use: Bushcraft / Outdoor
Production Type: Industrial
Country of Origin: USA
Blade: 1095 steel at 56/58HRC
Blade Finish: Black Coating
Handle: Zytel
Blade Length: 110mm.
Blade Thickness: 4.5mm.
Overall Length: 235mm.
Weight: 195g.
Sheath: Nylon and Celcon in Black
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan BeckerColtelleria Collini in Busto Arsizio is the official distributor for the KA-BAR brand in Italy.
KB-BK18BK -
Spartan Blades - Talos Liner Lock knife - Black - Harsey Design - SFBL7BK - kitchen knife
The TALOS Folder is a lightweight folding knife with a liner lock, designed by our friend and collaborator William W. Harsey Jr. Its slim and lightweight design makes it the perfect companion for everyday carry and daily tasks. Despite its small size, thanks to its thoughtful design, high-quality CTS-XHP blade, and deep pocket clip, it handles most daily tasks with ease. Whether you're wading through a trout-rich stream or on your way to work, this little knife is ideal.
All our Bronze (Field) grade folding knives incorporate our new "Oil Infused Bronze Bearing System" or "OIBBS". Our sintered bronze bearings are oil-infused, thus reducing friction on the blade, giving you a tight but smooth blade opening. This system is particularly useful for slow speeds, intermittent use, and irregular loads like those found on folding knives.
Intended use: Collection / Sports
Type of production: MidTech
Country of production: Taiwan
Blade: in CTS-XHP steel
Blade treatment: stone wash
Handle: G-10
Blade length: 80mm.
Blade thickness: 3.2mm.
Closed length: 100mm
Total length: 183mm.
Weight: 66g.
Closure: Liner Lock
Clip: in steel
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William HarseySFBL7BK -
Spartan Blades - Poros knife - G10 Green - 154CM - SFL11GR - knife
The POROS flipper was designed by Curtis Iovito as a robust and large-sized flipper. The high grind lines of this blade, combined with a sharp and penetrating tip, make it a reliable companion for everyday carry.
Its quick flipper action is assisted by IKBS bearings for that "Snap" you're looking for! Its distinctive scallops are not only beautiful to look at but also ensure a secure grip. The deep pocket clip maintains a low profile while keeping your blade ready for use when needed. The blade is made of 154CM stainless steel with a black titanium nitride coating; the SS hardware and liner have a black electroplated powder coating.
Intended use: Sports
Type of production: Industrial
Country of production: Taiwan
Blade: in 154CM stainless steel 58/60 HRC
Blade treatment: Black Titanium Nitride Coating
Handle: OD Green G10
Blade length: 89mm.
Blade thickness: 4mm.
Closed length: 97mm
Total length: 230mm.
Weight: 147g.
Closure: Liner Lock
Clip: in stainless steel, removable and reversible
Packaging: cardboard box with Spartan Blades logos. Design: Curtis Iovito
Notes: The Field Grade series with Bronze-colored box identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.SFL11GR -
Spartan Blades - Astor by Les George - Carbon FIber & CTS-XHP - SFBL8CF - knife
The ASTOR is our first folding knife in collaboration with prolific knife maker Les George, winner of Blade Show 2021 as "Imported Knife of the Year."
The ASTOR was built as a sturdy working knife! With its sturdy G-10 grips, thick liner-lock and high-strength CTS-XHP steel blade, the ASTOR is the perfect knife for those jobs that require a little extra toughness.
All of our Bronze Field Grade productions incorporate our new "Oil Infused Bronze Bushing System" or "OIBBS"! Our sintered bronze bushings are impregnated with oil, which reduces friction on the blade, thus ensuring that the blade opens smoothly, even when firmly held. This system is especially useful for low speeds, intermittent use and irregular loads such as those found on folding knives.
Intended Use: Sporting
Production type: Industrial
Country of manufacture: Taiwan
Blade: CTS-XHP 58/60 HRC stainless steel
Blade treatment: Stonewashed
Handle: Composite made of G10 and Carbon Fiber
Blade Length: 89mm.
Blade thickness: 4mm.
Length closed: 118mm.
Total length: 209mm.
Weight: 145g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Spartan Blades logos
Notes: The Field Grade series with Bronze-colored box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series one can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.SFBL8CF -
Spartan Blades - Astor by Les George - Green G10 & CTS-XHP - SFBL8GR - knife
The ASTOR is our first folding knife in collaboration with prolific knife maker Les George, winner of Blade Show 2021 as "Imported Knife of the Year."
The ASTOR was built as a sturdy working knife! With its sturdy G-10 grips, thick liner-lock and high-strength CTS-XHP steel blade, the ASTOR is the perfect knife for those jobs that require a little extra toughness.
All of our Bronze Field Grade productions incorporate our new "Oil Infused Bronze Bushing System" or "OIBBS"! Our sintered bronze bushings are impregnated with oil, which reduces friction on the blade, thus ensuring that the blade opens smoothly, even when firmly held. This system is especially useful for low speeds, intermittent use and irregular loads such as those found on folding knives.
Intended Use: Sporting
Production type: Industrial
Country of manufacture: Taiwan
Blade: CTS-XHP 58/60 HRC stainless steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 118mm.
Total length: 209mm.
Weight: 145g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Spartan Blades logos
Notes: The Field Grade series with Bronze-colored box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series one can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.SFBL8GR -
Spartan Blades - Talos Liner Lock knife - Green - Harsey Design - SFBL7GR - kitchen knife
The TALOS Folder is a lightweight folding knife with a liner lock, designed by our friend and collaborator William W. Harsey Jr. Its slim and lightweight design makes it the perfect companion for everyday carry and daily tasks. Despite its small size, thanks to its thoughtful design, high-quality CTS-XHP blade, and deep pocket clip, it handles most daily tasks with ease. Whether you're wading through a trout-rich stream or on your way to work, this little knife is ideal.
All our Bronze (Field) grade folding knives incorporate our new "Oil Infused Bronze Bearing System" or "OIBBS". Our sintered bronze bearings are oil-infused, thus reducing friction on the blade, giving you a tight but smooth blade opening. This system is particularly useful for slow speeds, intermittent use, and irregular loads like those found on folding knives.
Intended use: Collection / Sports
Type of production: MidTech
Country of production: Taiwan
Blade: in CTS-XHP steel
Blade treatment: stone wash
Handle: G-10
Blade length: 80mm.
Blade thickness: 3.2mm.
Closed length: 100mm
Total length: 183mm.
Weight: 66g.
Closure: Liner Lock
Clip: in steel
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William HarseySFBL7GR -
Spartan Blades - Ronin Shoto Folder Karambit - CTS-XHP - SFBL9BK - knife
The Spartan-Ronin Shōtō is a folding karambit knife with a liner lock. This blade is the result of a collaborative effort between Spartan Blades and TU Lam of Ronin Tactics, our former Special Forces colleague and dear friend.
Having worked throughout Asia and in Indonesia, both Tu Lam and Spartan hold a great respect for the Karambit style. This blade was designed to be incorporated into various martial arts systems.
It features a blade made of CTS-XHP, "Emerson Wave" function for easy opening, and a reversible pocket clip for left-hand carry; the black and red G10 grips ensure a secure grip. Please check this link to Ronin Tactics HERE.
All our Bronze (Field) grade folding knives incorporate our new "Oil Infused Bronze Bearing System" or “OIBBS”. Our sintered bronze bearings are oil-impregnated, thereby reducing friction on the blade, offering you a tight but smooth blade opening.
Intended use: Collection / Sports
Type of production: Industrial
Country of production: Taiwan
Blade: in stainless steel CTS-XHP
Blade treatment: Satin Black Ti/Nitride Finish
Handle: G10
Blade length: 75mm.
Blade thickness: 3.2mm.
Closed length: 135mm
Total length: 200mm.
Weight: 179g.
Lock: Liner Lock
Clip: in steel
Packaging: cardboard box with Spartan Blades logos
Notes: The Field Grade series with Bronze-colored box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series one can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.SFBL9BK -
Spartan Blades - Spartan-Ka-Bar - FDE MagnaCut & Leather - SB54DEBKLTBK - knife
On December 9, 1942, during the Second World War, KA-BAR presented a knife to the United States Marine Corps hoping it would become the standard weapon. In collaboration with the Marine Supply Department, the project was revised, and production began on an improved combat and utility knife.
During the war, USMC KA-BAR knives gained such recognition for their quality and abundance that "KABAR" became the common name. It was adopted by the Marines, Army, Navy, Coast Guard, and Underwater Demolition Teams. Years later, many KA-BAR knives were reactivated in Korea, Vietnam, Desert Storm, and the wars in Iraq and Afghanistan.
In 2019, KA-Bar partnered with Spartan Blades to form Pineland Cutlery. CEO John Stitt aimed to create a "KA-BAR" with improved strength, robustness, and corrosion resistance. During development, metallurgist Larrin Thomas identified CPM MagnaCut® steel with the desired qualities.
CPM MagnaCut® is a sintered high-carbon steel produced by Crucible Industries and specifically designed for blades. Spartan Blades developed the Spartan-KA-BAR using CNC machining, cryogenic treatment, and PVD coatings.
Intended Use: Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: CPM MagnaCut steel 61/63HRC
Blade Finish: ZrN Flat Dark Earth
Handle: Kraton G with stainless steel 301 guard and tungsten DLC treatment
Blade Length: 178mm.
Blade Thickness: 4.2mm.
Total Length: 305mm.
Weight: 306g.
Sheath: Black leather
Packaging: Cardboard box with Spartan Blades logos
Notes: Please note that the Flat Dark Earth (FDE) coated blade, when inserted or removed from the leather sheath, may show streaks or stains due to the dye used for the sheath. The blade can be cleaned with petroleum or acetone, re-oiled (e.g., with WD40 or light mechanical oil), and dried with a clean cloth to restore the original coating finish.SB54DEBKLTBK -
Spartan Blades - Spartan-Harsey Fighter - SBSL006BK - Knife
Produced in Olean, NY, in collaboration with the skilled people at KA-BAR knives, the Spartan-Harsey Fighter is born from the partnership between William W. Harsey Jr. and Spartan Blades. The intention behind this knife was to combine the blade of a US military combat/utility knife with the contoured handle that has become a hallmark of Mr. Harsey's designs. This knife is a no-nonsense combat blade.
Intended Use: Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: 1095 carbon steel 56/58HRC
Blade Finish: Black Powder Coating
Handle: Injection-molded Thermoplastic
Blade Length: 155mm
Blade Thickness: 4.9mm
Overall Length: 292mm
Weight: 334g
Sheath: Thermoplastic, with belt attachment and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by William W. Harsey Jr. - The Professional Grade series with Silver packaging identifies American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with Ka-Bar's production experience to keep prices affordable for the public without sacrificing USA-made production.SBSL006BK -
Spartan Blades - Machai knife Green - Fixed Blade Pro Grade- SBSL002BKGR - Knife
Machai - A fitting name for this large cutting tool. In Greek mythology, the Machai were the demons (spirits) of battle and combat.
The high weight and recurved profile of this flat ground blade make it an excellent hatchet. The Machai has a full-tang construction and a handle that ensures a forward balance in the user's hand.
The textured Micarta canvas ergonomic handle ensures a secure and comfortable grip, whether wet or dry. Made by the good people at KA-BAR Knives; in Olean, NY, USA.
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: in 1095 carbon steel 56/58HRC
Blade finish: Black Powder Coating
Handle: CE Canvas Micarta
Blade length: 165mm.
Blade thickness: 4.8mm.
Total length: 295mm.
Weight: 308g.
Sheath: Thermoplastic, multi-position, with M.O.L.L.E compatible belt attachments and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by Iovito - The Professional Grade series with a Silver-colored box identifies American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with the production experience of Ka-Bar to keep public prices affordable without having to give up a made in USA production.SBSL002BKGR -
Spartan Blades - Harsey TT - Kydex, Flat Dark Earth and Camo Micarta - SB43DECMKYTN - knife
The Harsey TT (Tactical Trout) is designed to be a very comfortable and sturdy medium-sized knife for most field tasks and defensive use. The size of the TT makes it easy to carry and handle.
The blade profile provides a clean cut with excellent tip strength. The full tang and handle of the Harsey TT provide neutral balance in the user's hand. The ergonomically shaped, linen Micarta handle provides a comfortable and secure grip when dry or wet. The pommel has a lanyard hole in the center of the angled tip. The TT is an excellent universal fixed blade, well balanced in size, function and feel. In our opinion, one of William Harsey's best designs.
After more than 40 years of service in the U.S. Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had already been designing and drawing knives for his friends in the Special Forces for years, and Mark, who had always been involved in military and tactical equipment when he served in the "Green Berets," decide to combine their skills and passion with the goal of building innovative and functional knives using the highest quality materials and made entirely in the United States.
Intended Use: Tactical/Military
Production Type: Mid Tech
Country of Production: USA
Blade: stainless steel CPM-S45VN 59/61HRC
Blade finish: ZrN Flat Dark Earth
Handle: Linen Micarta
Blade length: 114mm.
Blade thickness: 4.8mm.
Total length: 229mm.
Balance: on the guard branch
Weight: 209g.
Sheath: thermoformed in Kydex
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William HarseySB43DECMKYTN -
Spartan Blades - Harsey Folder - 3.25" Chad Nichols Damascus Blue Anodization - knife
This is the latest knife produced in terms of time by Spartan Blades in collaboration with legendary knife maker William "Bill" Harsey Jr.
The SHF 3.25 is the knife many of you have been waiting for! A reliable 6AL4V titanium frame-lock pocket knife with a handcrafted 3.25" damascus steel blade made by Chad Nichols. Easy to carry and comfortable in the hand, this is a truly exceptional knife. Constructed like its award-winning big brother the SHF 3.25 is made entirely of 6AL-4V titanium, except for the pivot, blade and arbor.
This medium-sized folding knife features a reversible pocket clip and two thumb studs that allow it to be carried in either the right or left hand. If you are looking for a high-quality, well-designed folding knife, this is one you should consider!
Intended Use: Collector/Sportsman
Type of manufacture: MidTech
Country of manufacture: USA
Blade: handcrafted stainless damascus steel, by Chad Nichols
Blade treatment: -
Handle: titanium 6AL4V
Blade length: 82.5mm.
Blade thickness: 3.2mm.
Length closed: 98.5mm.
Total length: 181mm.
Weight: 82g.
Closure: FrameLock
Clip: anodized titanium
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William HarseySF10CNBL -
Spartan Blades - Moros Knife - Kydex, DLC Flat Black and Black Micarta - SB53BKBKKYBK - knife
The Moros is an excellent choice for field or tactical use. This well-balanced blade is the perfect blend of size and performance. It's light enough to carry around without hassle, yet sturdy enough to handle a range of everyday tasks. The tip profile is flat with a tapered upper edge ensuring excellent cutting with good penetrating force. The full tang and grip of the Moros provide a neutral balance, making it light in the hand. The ergonomic and textured Micarta canvas grip ensures a comfortable and secure grip whether dry or wet.
After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had been designing and drawing knives for friends in special forces for years, and Mark, who had always dealt with military and tactical equipment while working in the "Green Berets," decided to combine their skills and passion with the goal of building innovative and functional knives using high-quality materials and entirely made in the United States.
Intended use: Tactical/Military
Type of production: Mid Tech
Country of production: USA
Blade: in CPM-S45VN stainless steel 59/61HRC
Blade finish: PVD Tungsten DLC Flat Black
Handle: Canvas Micarta
Blade length: 134mm.
Blade thickness: 4.8mm.
Total length: 254mm.
Balance: on the guard branch
Weight: 203g.
Sheath: thermoformed in Kydex
Packaging: Cardboard box with Spartan Blades logosSB53BKBKKYBK -
Spartan Blades - Moros - Kydex, DLC Flat Black and Green Micarta - SB53BKGRKYBK - knife
The Moros is an excellent choice for field or tactical use. This well-balanced blade is the perfect blend of size and performance. Light enough to carry without bothering, yet strong enough to handle a variety of daily tasks. The tip profile is flat with a tapered top edge that provides an excellent cut with good penetration force. The Moros' solid tang and handle provide neutral balance, making it light in the hand. The ergonomic, textured Micarta canvas handle provides a comfortable and secure grip when dry or wet.
After more than 40 years of service in the U.S. Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had already been designing and drawing knives for his friends in the Special Forces for years, and Mark, who had always been involved in military and tactical equipment when he served in the "Green Berets," decide to combine their skills and passion with the goal of building innovative and functional knives using the highest quality materials and made entirely in the United States.
Intended Use: Tactical/Military
Production Type: Mid Tech
Country of Production: USA
Blade: stainless steel CPM-S45VN 59/61HRC
Blade Finish: PVD Tungsten DLC Flat Black
Handle: Canvas Micarta
Blade length: 134mm.
Blade thickness: 4.8mm.
Total length: 254mm.
Balance: on the guard branch
Weight: 203g.
Sheath: thermoformed Kydex.
Packaging: cardboard box with Spartan Blades logos
Notes: Design by Curtis IovitoSB53BKGRKYBK -
Ka-Bar - USMC Fighting Knife 125th Anniversary Special Edition - 9226 - knife
The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for U.S. troops in World War II and since then its effectiveness has been universally recognized and employed in many other military scenarios. With this special edition, Ka-Bar celebrates the company's 125th anniversary.
Intended Use: Tactical/Military
Blade: 1095 carbon steel 56/58HRC
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balance: backward
Weight: 305g.
Sheath: leather
Notes: special edition to celebrate the company's 125th anniversaryKB-9226 -
Ka-Bar - Wrench neck Knife - 1119 - knife
The KA-BAR Wrench Knife 1119 is a neck knife whose design is based on knives that are sometimes forged from old wrenches by knife enthusiasts. KA-BAR has used these characteristic shapes and transformed them into this cute knife.
KA-BAR used 425 to forge this knife. This is a slightly improved version of the popular 420 steel. Stainless, durable, easy to sharpen. The KA-BAR 1119 wrench knife comes with an elegant plastic sheath, without belt clip.
Intended use: Tactical / Utility
Type of production: Industrial
Country of production: USA
Blade: 425 stainless steel
Blade treatment: -
Handle: -
Blade length: 80mm.
Blade thickness: 5mm.
Total length: 182mm.
Weight: 91g.
Sheath: in ABS
Packaging: rigid packaging with Ka-Bar logos
Note: -The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand
KB-1119 -
Ka-Bar - Mini Dozier Folding Hunter knife 4072ZG - Zombie Green - knife
Intended use: tactical
Blade: AUS 8A stainless steel
Handle: Zytel
Blade length: 60mm.
Blade thickness: 2.5mm.
Closed length: 87mm.
Total length: 147mm.
Balancing:
Weight: 22g.
Closure: back lock
Opening: -
Clip: in steel
Design: by Bob DozierProduction: Taiwan
The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand
KB-4072ZG -
Spartan Blades - Damysus Green - Professional Grade - SBSL003BKGR - Knife
Intended Use: Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: Carbon steel 1095 56/58HRC
Blade Finish: Black Powder Coating
Handle: CE Canvas Micarta
Blade Length: 139mm.
Blade Thickness: 4.8mm.
Total length: 273mm.
Weight: 255g.
Sheath: Thermoplastic, multi-position, with M.O.L.L.E. compatible belt clip and push-button retention system.
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Note: Design by Iovito/Carey - The Professional Grade series with Silver box, identifies the American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series you can find new products that combine the typical Spartan Blades designs with Ka-Bar's production experience in order to keep prices affordable to the public without having to renounce to a made in USA production.SBSL003BKGR -
Spartan Blades - Damysus Black - Professional Grade - SBSL003BKBK - Knife
Intended Use: Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: Carbon steel 1095 56/58HRC
Blade Finish: Black Powder Coating
Handle: CE Canvas Micarta
Blade Length: 139mm.
Blade Thickness: 4.8mm.
Total length: 273mm.
Weight: 255g.
Sheath: Thermoplastic, multi-position, with M.O.L.L.E. compatible belt clip and push-button retention system.
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Note: Design by Iovito/Carey - The Professional Grade series with Silver box, identifies the American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series you can find new products that combine the typical Spartan Blades designs with Ka-Bar's production experience in order to keep prices affordable to the public without having to renounce to a made in USA production.SBSL003BKBK -
Spartan Blades - Enyo Black AUS-8A - Field Grade - SBBL2BK - Knife
Intended Use: Neck / Tactical / Military
Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-8A 58/60HRC
Blade Finish: Black Powder Coating
Handle: Stainless steel AUS-8A 58/60HRC
Blade Length: 68mm.
Blade thickness: 4.8mm.
Total length: 159mm.
Weight: 80g.
Scabbard: Thermoplastic, multi-position, with push-button retention system.
Package: Cardboard box with Spartan Blades Field Grade logos.
Note: Design by Iovito/Carey - The Field Grade series with Bronze color box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (company formed by Spartan Blades and Ka-Bar). In this series you can find the most iconic Spartan Blades designs offered at very aggressive and competitive prices.SBBL2BK -
Ka-Bar - Becker Linen Micarta Scales Full Size - BK77BLKHNDL - Knives Accessories
Pair of original Ka-Bar handles/scales, made in USA, designed to replace the original nylon handle of Becker BK series models.
Package Contents: Pair of handles
Country of Production: USA
Material: Black Linen Micarta
Replacement screws present: No
Packaging: Transparent plastic bag
Compatibility with Ka-Bar models:
* BK2
* BK3
* BK4
* BK5
* BK7
* BK9
* BK10
* BK20
* BK21
* BK22
* BK29
* BK32
* BK39KB-BK77BLKHNDL -
Ka-Bar - Dozier Folding Hunter knife 4062D2 - Coyote Blue Zytel Handle - knife
Intended use: tactical
Blade: D2 Coyote Tan steel
Handle: Zytel
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 183mm.
Balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel
Design: by Bob DozierProduction: Taiwan
The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand
KB-4062D2 -
Ka-Bar - Becker Folder - BK40 - knife
Intended Use: Sporting / Light Utility
Production type: Industrial
Country of Production: China
Blade: Stainless steel AUS8A 55/58HRC
Blade treatment: Satin finish
Handle: GFN PA66
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: 126mm.
Total length: 216mm.
Weight: 154g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Packaging: Cardboard and plastic box with Ka-Bar logos
Notes: -KB-BK40 -
Ka-Bar - TDI Ladyfinger - 1494 - knife
Intended use: Tactical / EDC
Production type: industrial
Country of Production: Taiwan
Blade: full tang in stainless steel AUS-8 57/59HRC
Blade finish: Powder coated
Handle: Zytel
Blade Length: 48mm.
Blade thickness: 2mm.
Total length: 121mm.
Weight: 68g.
Sheath: ABS with clip
Notes: -KB-1494 -
Ka-Bar - USSF TDI Astro MP - 1480SF - knife
Intended Use: Tactical / Collection
Production type: Industrial
Country of Production: Taiwan
Blade: full tang stainless steel AUS-8 57/59HRC
Blade Finish: Powder coated
Handle: Zytel
Blade length: 63mm.
Blade thickness: 3mm.
Total length: 145mm.
Weight: 78g.
Sheath: ABS with clip
Notes: knife made for USSFKB-1480SF -
Ka-Bar - USSF Space-Bar Plain Edge - 1313SF - knife
The KA-BAR 1313SF Space-Bar Knife USSF is the new legendary fixed knife produced for the United States Space Force. A unit of the United States Army working in space, founded in 2019. No, this is not the pilot episode of a new TV series, this is real!
This 131SF version is acaracterized by a light blue Kraton handle. A rubber-like material that offers great grip regardless of the circumstances. The 1313SF comes with a solid thermoplastic scabbard. Ready to go to Infinity and beyond!
Intended use: military / collectionProduction type: industrial
Country of manufacture: USA
Blade: carbon steel 1095 56/58HRC
Blade finish: powder coated
Handle: Kraton G
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 300mm.
Balance: set back 1.5cm.
Weight: 300g.
Sheath: thermoplastic, belt.
Notes: knife made for USSFKB-1313SF -
Ka-Bar - TDI Large knife - 02-1482 - knife
Intended use: tactical / military
Type of production: industrial
Blade: stainless steel AUS-8 57/59 HRC with solid shank
Blade treatment: nitriding
Handle: Zytel
Blade length: 93mm.
Blade thickness: 4.5 mm.
Closed length: -
Total length: 194 mm.
Balancing: -
Weight: 186 g
Closure: -
Clip: -
Case: ABS
Note: -KB-1482 -
Ka-Bar BK&T - Becker Harpoon Survival knife BK18 - knife
Intended use: Bushcraft / Outdoor
Type of production: Industrial
Blade production: USA
Blade: 1095 to 56 / 58HRC steel
Blade treatment: Desert Traction Coating
Handle: Zytel
Blade length: 110mm.
Blade thickness: 4.5mm.
Length closed: -
Total length: 235mm.
Thick when closed: -
Balancing: -
Weight: 195g.
Closing: -
Clip: -
Sheath: Nylon and Celcon coyote color
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan BeckerCollini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand
KB-BK18 -
Ka-Bar - TDI Investigator Law Enforcement - 1493 - knife
Intended use: tactical / military
Type of production: industrial
Country of production: Taiwan
Blade: full tang in AUS-8 57 / 59HRC stainless steel
Blade treatment: nitriding
Handle: Zytel
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 127mm.
Weight: 68g.
Sheath: in ABS with clip
Notes: smaller version of the TDI Law Enforcement 1480 modelKB-1493 -
Ka-Bar - USMC Commemorative Presentation Grade Fighting Knife - 1215 - knife
The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.
This elegant version of the traditional Ka-bar 1217 is characterized by the presence of the gold-plated brass caseback and guard. This version is perfect as a retirement or graduation gift, or simply as an object to be included in your knife collection.
Intended use: Tactical / MilitaryBlade: 1095 56 / 58HRC carbon steel
Handle: premium leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 278g.
Closing: -
Clip: -
Sheath: leather
Note: -KB-1215 -
Ka-Bar - Becker Remora BK13CP neck knife - knife
Intended use: Tactical / Utility
Type of production: Industrial
Country of production: USA
Blade: 1095 56 / 58HRC carbon steel
Blade treatment: Black Coating
Handle: -
Blade length: 60mm.
Blade thickness: 3.1mm.
Total length: 130mm.
Weight: 32g.
Sheath: in ABS, for neck
Packaging: rigid pack with Ka-Bar logos
Note: -KB-BK13CP -
Ka-Bar - Foliage Green Fighting knife - 5012 - Kydex Sheath - knife
Intended use: tactical / military
Type of production: industrial
Provenance Lama: USA
Blade: 1095 56 / 58HRC steel
Blade treatment: Teflon coating
Handle: Kraton G
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -
Total length: 300mm.
Balancing: set back to 1.5cm
Weight: 300g.
Closing: -
Sheath: in kydex
Note: -KB-5012 -
Ka-Bar - USMC Black short knife - 02-1258 - Kydex Sheath - knife
Intended use: Tactical / Military / Collection
Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 135mm. partially serrated
Blade thickness: 3.5mm.
Length closed: -mm.
Total length: 240mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 180g.
Closing: -
Clip: -
Sheath: in leather
Note: -
Send feedback
History
Saved
CommunityKB-1258 -
Ka-Bar - USMC 9169 Commemorative Afghanistan Fighting Knife - knife
The commemorative edition of the knife of the United States Marine Corps Enduring Freedom Afghanistan. Knife dedicated to those brave men and women who served during the conflict in Afghanistan.
Intended use: Tactical / Military
Production: U.S.A.
Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: in leather
Note: -KB-9169 -
Ka-Bar - Jarosz Spear Point Flipper knife 7509 - titanium handle - knife
Destination of use: tactical
Blade: stainless steel AUS 8A
Handle: titanium
Blade length: 88mm.
Blade thickness: 4mm.
Length closed: 135mm.
Total length: 215mm.
balancing:
Weight: 124g.
Closing: frame lock
Opening: pinball
Clip: in steel
Sheath: Nylon
Design: by Jesse Jarosz
Production: TaiwanKB-7509 -
Ka-Bar BK&T - Becker Campanion BK2 - knife
Intended Use: Hiking / Heavy Utility
Type of production: Industrial
Production Lama USA
Blade: Stainless 1095 56/58HRC
Treatment Blade: Black Traction Coating
Handle: Zytel
Blade length: 135mm.
Blade thickness: 6.5mm.
Length closed: -
Overall length: 267mm.
Thick when closed: -
Balancing: -
Weight: 454g.
Closure: -
Clip: -
Sheath: ABS and Nylon
Packaging: Cardboard box with logos KA-Bar
Notes: Design by Ethan BeckerKB-BK2 -
Ka-Bar - Black Fighting Knife - 02-1212 - Leather Sheath - knife
Intended use: tactical / military / collection
Type of production: industrial
Provenance Lama: USA
Blade: 1095 56 / 58HRC steel
Blade treatment: Teflon coating
Handle: Kraton G
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -
Total length: 300mm.
Balancing: set back to 1.5cm
Weight: 300g. (406g. With scabbard)
Closing: -
Sheath: in leather
Note: -KB-1212 -
Ka-Bar BK & T - Becker Short Drop Point BKR16 - knife
Ka-Bar BK & T - Becker Short Drop Point BKR16 - knife
Ka-Bar from the experience and ideas of Ethan Becker, comes this line of knives voted to extreme use in the field. The blade 1095 carbon has been specially chosen for its superiority in holding the wire and the ergonomic handle Grivory, a thermoplastic polymer with more than 60% of glass fiber, ensures a good grip and absolute wear resistance and durability .
Steel: 1095 56/58 HRC
Length of the blade: 105 mm.
Blade Thickness: 4 mm.
Overall length: 230 mm.
Weight: 160 g.Sheath: Cordura desert
Notes: extra pair of grips for the handle color desertKB-BK16 -
Ka-Bar - Kukri Machete - 02-1249 - knife
Ka-Bar - Kukri Machete - 02-1249 - knife
Intended use: military / sports
Type of production: industrial
Blade: 1095 carbon steel - HRC 56-58
Treatment Blade: Teflon
Handle: Kraton ® G
Blade length: 290mm.
Blade Thickness: 4mm.
Length closed: -
Total length: 430mm.
Balance: -
Weight: 600g.
Closing: -
Clip: -
Sheath: tactical leather and CorduraNotes: -
KB-1249 -
Ka-Bar - Combat Kukri - 1280 - knife
Destination: military/sporting Type of production: industrial Blade: carbon steel 1095 - HRC 56-58 Blade Treatment: teflon Handle: Kraton G® Blade Length: 216mm. Blade Thickness: 4mm. Total Length: 340mm. Balancing: toward tip Weight: 370g. Sheath: Cordura, with tactical features Note: -
KB-1280 -
Ka-Bar BK&T - Neck Knife BK11 - coltello
Destinazione d'uso: Neck Knife
href="https://www.coltelleriacollini.it/ka-bar" target="_blank">KA-BAR
Lama: in acciaio al carbonio 1095 58/59 HRC
Manicatura: -
Lunghezza lama: 81mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 172mm.
Bilanciatura: in coincidenza del ramo di guardia inferiore
Peso: 78g. (120g. con fodero)
Fodero: ABS
Note: inclusi 2mt di paracordKB-BK11 -
Ka-Bar - Big Brother knife Black - KB2211 - knives
Intended use: Tactical / Military
Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 236mm.
Blade thickness: 4mm.
Total length: 360mm.
Balancing: set back - 2 cm. from the lower guard branch
Weight: 412g.
Closing: -
Clip: -
Sheath: in kydex
Note: -
Send feedback
History
SavedKB-2211 -
Ka-Bar - BK7 - Becker Combat Utility - knife
The KA-BAR BK7 is a rugged field knife designed to meet the toughest outdoor challenges.
The blade shape is a variation of the classic "clip point," featuring a pronounced curve on the back that converges toward the sharp point. This design allows for easy precision work and offers enough extension for heavier tasks such as woodworking.
The BK7's handle is made of Ultramid, a reinforced plastic material that provides a secure and comfortable grip even in wet or sweaty conditions. The ergonomics of the handle are designed to provide optimal control during use and reduce hand fatigue during prolonged work.
Intended Use: Hiking / Heavy Utility
Production type: Industrial
Country of manufacture: USA
Blade: 1095 steel at 56/58HRC
Blade Finish: Black Traction Coating
Handle: Ultramid
Blade Length: 180mm.
Blade thickness: 4.5mm.
Total length: 325mm.
Balance: advanced
Weight: 475g.
Sheath: Nylon, thigh-high, MOLLE compatible, with rigid ABS insert and external pocket to hold other tools or sharpeners
Packaging: cardboard box with KA-Bar logos
Notes: Design by Ethan BeckerKB-BK7 -
Ka-Bar - Black Fighting Knife - 02-1214 - Kydex Sheath - knife
Intended use: tactical / military / collection
Type of production: industrial
Provenance Lama: USA
Blade: 1095 56 / 58HRC steel
Blade treatment: Teflon coating
Handle: Kraton G
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -
Total length: 300mm.
Balancing: set back to 1.5cm
Weight: 300g.
Closing: -
Sheath: in kydex
Note: -
Send feedback
History
Saved
CommunityKB-1214 -
Ka-Bar - D2 Extreme knife - 02-1282 - knife
Intended use: Military
Type of production: industrial
Blade: in steel D2
Blade treatment: teflon coating
Lama production: USA
Handle: Kraton
Blade length: 178mm.
Blade thickness: 4mm.
Length closed: -
Total length: 305mm.
Balancing: -
Weight: 350g.
Closure: -
Clip: -
Sheath: in kydex
Note: -KB-1282 -
Ka-Bar - Mark I - Kraton- 2221 - knife
Purpose: Sport / Tactical
Type of production: Industrial
Country of Origin: USA
Blade: carbon steel 1095 56 / 58HRC
Blade treatment: Teflonatura
Handle: Kraton
Blade Length: 130mm.
Blade thickness: 3.5mm.
Total Length: 235mm.
Weight: 250g.
Sheath: in FRN (fiberglass reinforced nylon)
Packing: Cardboard box with Ka-Bar logos
Notes: -KB-2221 -
Ka-Bar - TDI knife Law Enforcement - 02-1480 knife
Intended use: tactical / military
Type of production: industrial
Blade: full tang in stainless steel AUS-8 57 / 59HRC
Blade treatment: nitriding
Handle: Zytel
Blade length: 63mm.
Blade thickness: 3mm.
Length closed: -
Total length: 145mm.
Balancing: -
Weight: 78g.
Closure: -
Clip: -
Sheath: ABS with clip
Note: -KB-1480 -
Ka-Bar - TDI Large Tanto Knife Serrated - 02-1485 Knife
Intended use: tactical / military
Type of production: industrial
Blade: stainless steel AUS-8 57/59 HRC with solid shank
Blade treatment: nitriding
Handle: Zytel
Blade length: 93mm.
Blade thickness: 4.5 mm.
Closed length: -
Total length: 194 mm.
Balancing: -
Weight: 186 g
Closure: -
Clip: -
Case: ABS
Note: -KB-1485 -
Ka-Bar - USMC Iraqi Freedom - K-9128 - knife
A commemorative version of the "Iraqi Freedom" military operations that took place during the second Gulf war between 2003 and 2004, aimed at freeing the Iraqi territory from the grip of the dictator Saddam Hussein.
Destination of use: collection
Country of production: USA
Blade: 1095 56 / 58HRC carbon steel
Surface treatment: Teflon coating with laser engraving
Grip: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balancing: set back
Weight: 305g.
Sheath: leather, with USMC logos
Notes: Limited and commemorative editionKB-9128 -
Ka-Bar - USMC Short - 02-1252 - knife
Ka-Bar - USMC Short - 02-1252 - knife
Intended use: Tactical / Military
Blade: 1095 carbon steel 56 / 58HRC
Handle: Leather rings
Blade length: 135mm. partially serrated
Blade Thickness: 3.5mm.
closed length: -mm.
Overall length: 240mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 182g.
Closed: -
Clip: -
Sheath: Leather
Notes: -KB-1252 -
Ka-Bar, USMC Fighting Knife, 1217, ka bar knife
Intended Use: Tactical / Military
Blade: 1095 carbon steel 56/58HRC
Handle material: leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
Length closed:-mm.
Total length: 305mm.
Balance: back - 1 cm. the branch of lower guard
Weight: 305g.
Closing: -
Clip: -
Sheath: Leather
Notes: -KB-1217 -
Al-Mar - Nomad Pocket Knife - ND-2 - VG10 - PRIVATE COLLECTION - knife
The Nomad is a classic Al Mar knife designed by Kirk Rexroat and no longer in production for years. It's a tactical folding knife with textured black G-10 handles on a stainless steel frame with a liner lock. The blade is made of VG-10 stainless steel with a flat grind and smooth edge.
KNIFE RETIRED FROM PRIVATE COLLECTION
Type: Previously Purchased - knife no longer in production
Condition: in like-new condition
Commercial availability: difficult to find
Sharpness: factory sharpness
Blade marks: free of marks
Handle marks: free of marks
Box: original Al-Mar box
Manuals, Certificates, and Warranties: -
Checked and Certified by our in-house Coltelleria Collini laboratory
Product DescriptionIntended Use: Sporting/Collectible
Production Type: Industrial
Blade: VG10 stainless steel
Handle: G-10
Blade Length: 95mm.
Blade Thickness: 70mm.
Closed Length: 110mm.
Overall Length: 185mm.
Balance:
Weight: 97g.
Lock: Liner Lock
Clip: stainless steelAP-ND-2 -
Al-Mar - Sere IV SOF Attack 3004/A - De Oppresso Liber - PRE-OWNED - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Perfect, like new
* Commercially available: Discontinued
* Sharpening: Factory sharpened, perfect
* Marks on blade: None
* Marks on handle: None
* Box: Present and perfect
* Scabbard: Present and perfect
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: tactical / collection
Country of Production: Japan
Production type: industrial
Blade: stainless steel AUS-8
Blade Finish: Satin finish
Handle: brown micarta
Blade length: 148mm.
Blade thickness: 4mm.
Total length: 265mm.
Balance: on the guard branch
Weight: 238g.
Sheath: leather
Notes: previously purchased item, withdrawn from private collection - like new, perfect in every detail - comes with original unopened boxAL-3004/A-CP -
Spartan Blades - Spartan-Ka-Bar - DLC MagnaCut & Black Kydex - SB54BKBKKYBK - knife
On December 9, 1942, during the Second World War, KA-BAR presented a knife to the United States Marine Corps in the hope of it becoming the standard weapon. In collaboration with the Marine Supply Department, the project was revised and the production of an improved combat and utility knife began.
During the war, USMC KA-BAR knives became so renowned for their quality and abundance that "KABAR" became the common name. It was adopted by the Marines, Army, Navy, Coast Guard, and Underwater Demolition Teams. Years later, many KA-BAR knives were reactivated in Korea, Vietnam, Desert Storm, and the wars in Iraq and Afghanistan.
In 2019, KA-Bar joined forces with Spartan Blades to establish Pineland Cutlery. CEO John Stitt aimed to create a "KA-BAR" with enhanced strength, robustness, and corrosion resistance. During development, metallurgist Larrin Thomas identified CPM MagnaCut® steel with the desired qualities.
CPM MagnaCut® is a sintered high-carbon steel produced by Crucible Industries and specially designed for blades. Spartan Blades developed the Spartan-KA-BAR using CNC machining, cryogenic treatment, and PVD coatings.
Intended Use: Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: CPM MagnaCut steel 61/63HRC
Blade Finish: Tungsten DLC
Handle: Kraton G with stainless steel 301 guard and Tungsten DLC treatment
Blade Length: 178mm.
Blade Thickness: 4.2mm.
Total Length: 305mm.
Weight: 306g.
Sheath: Kydex, thermoformed, with belt loops and M.O.L.L.E. compatible
Packaging: Cardboard box with Spartan Blades logos
Notes: -SB54BKBKKYBK -
Spartan Blades - Spartan-Ka-Bar - FDE MagnaCut & Coyote Kydex - SB54DEBKKYTN - Knife
On December 9, 1942, during World War II, KA-BAR presented a knife to the United States Marine Corps, hoping it would become the standard weapon. In collaboration with the Marine Quartermaster Department, the project was revised, and production began on an improved combat and utility knife.
During the war, USMC KA-BAR knives gained such recognition for their quality and abundance that "KABAR" became the common name. It was adopted by the Marines, Army, Navy, Coast Guard, and Underwater Demolition Teams. Years later, many KA-BAR knives were reactivated in Korea, Vietnam, Desert Storm, Iraq, and Afghanistan conflicts.
In 2019, KA-Bar partnered with Spartan Blades to form Pineland Cutlery. CEO John Stitt desired a "KA-BAR" with enhanced durability, robustness, and corrosion resistance. During development, metallurgist Larrin Thomas identified CPM MagnaCut® steel with the desired qualities.
CPM MagnaCut® is a sintered high-carbon steel produced by Crucible Industries, specifically designed for blades. Spartan Blades developed the Spartan-KA-BAR using CNC machining, cryogenic treatment, and PVD coatings.
Intended Use: Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: CPM MagnaCut steel 61/63HRC
Blade Finish: ZrN Flat Dark Earth
Handle: Kraton G with stainless steel 301 guard and tungsten DLC treatment
Blade Length: 178mm.
Blade Thickness: 4.2mm.
Total Length: 305mm.
Weight: 306g.
Sheath: Kydex, thermoformed, with belt loops and M.O.L.L.E. compatible
Packaging: Cardboard box with Spartan Blades logos
Notes: -SB54DEBKKYTN -
Spartan Blades - Spartan-Harsey Nessmuk - SBSL005BK - Knife
Produced in Olean, NY, in collaboration with the skilled people at KA-BAR knives, the design of the Spartan-Harsey Nessmuk is based on a classic American concept popularized by George Washington Sears (1821-1890) and the more moderate ergonomic designs of William W. Harsey Jr.
Under the guidance of a Native American from the Narragansett tribe named Nessmuk, George Washington Sears embraced the natural world, learning survival skills. Sears adopted "Nessmuk," meaning "wood duck," as his pseudonym, reflecting his love for forest life. Writing as "Nessmuk," he contributed to Forest and Stream magazine in the 1880s, promoting canoeing, the Adirondack lakes, and environmentalism.
Sears' diverse experiences led to his writings on the wonders of nature and conservation. He advocated minimalism: lighting fires, setting up tents, and more. He emphasized respect for nature, leading to a call for conservation.
Sears authored "Woodcraft" (1884), offering practical advice and introspection. The "Log of the Bucktail" series and poetry followed. Illness couldn't weaken his love for nature. He passed away in 1890, with Nessmuk's legacy enduring in Wellsboro.
A supporter of thin and sharp knives, Sears' ideals are reflected in our Nessmuk design.
Intended Use: Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: 1095 carbon steel 56/58HRC
Blade Finish: Black Powder Coating
Handle: Injection-molded Thermoplastic
Blade Length: 130mm
Blade Thickness: 4.8mm
Overall Length: 254mm
Weight: 308g
Sheath: Thermoplastic, with belt attachment and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by William W. Harsey Jr. - The Professional Grade series with Silver packaging identifies American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with Ka-Bar's production experience to keep prices affordable for the public without sacrificing USA-made production.SBSL005BK -
Spartan Blades - Spartan-Harsey Kukri - SBSL007BK - Knife
Produced in Olean, NY, in collaboration with the skilled people at KA-BAR knives, the Spartan-Harsey Kukri knife has been designed to be a highly durable hiking knife. The kukri features a blade of over 22cm, making it an all-around tool due to its center of mass, allowing the user to slice while cutting to even penetrate thick objects.
While this blade is primarily famous for its military use, the kukri is more commonly employed as a multi-purpose tool in fields and homes across Nepal. Its uses range from construction, clearing, cutting firewood, digging, butchering animals for food, slicing meat and vegetables, skinning animals, to opening cans.
It can function as a smaller knife using the narrower part of the blade closer to the handle. The heavier and wider end of the blade, towards the tip, functions as a hatchet or a small shovel.
Intended Use: Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: 1095 carbon steel 56/58HRC
Blade Finish: Black Powder Coating
Handle: Injection-molded Thermoplastic
Blade Length: 223mm
Blade Thickness: 6.3mm
Overall Length: 352mm
Weight: 580g
Sheath: Thermoplastic, with belt attachment and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by William W. Harsey Jr. - The Professional Grade series with Silver packaging identifies American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with Ka-Bar's production experience to keep prices affordable for the public without having to sacrifice USA-made production.SBSL007BK -
Spartan Blades - Alala knife Green - Fixed Blade - SBSL004BKGR - Knife
Alala - In ancient Greece, it meant "battle cry" or "war cry" and was the personification of the war cry in Greek mythology. ... Greek soldiers attacked the enemy with this cry to cause panic in their ranks. Its sturdy and comfortable design makes it a very comfortable everyday carry fixed blade with excellent ergonomics. Perfectly suited for daily cutting tasks, it is always ready to assist the user. The molded sheath is equipped with an active retention lever and a securing strap for convenient carry options. Made by the excellent people at KA-BAR Knives; in Olean, NY, USA.
Intended use: Tactical / Military
Production type: Industrial
Country of production: USA
Blade: in 1095 carbon steel 56/58HRC
Blade finish: Black Powder Coating
Handle: CE Canvas Micarta
Blade length: 95mm.
Blade thickness: 4.8mm.
Total length: 200mm.
Weight: 135g.
Sheath: Thermoplastic, multi-position, with M.O.L.L.E compatible belt attachments and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by Iovito/Carey - The Professional Grade series with a silver-colored box identifies the American production made by Ka-Bar entrusted to Pineland Cutlery (a company founded by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with the production experience of Ka-Bar to keep public prices affordable without having to give up a made in the USA production.SBSL004BKGR -
Spartan Blades - Harsey Folder - 3.25" Chad Nichols Damascus Bronze Anodization - knife
This is the latest knife produced in terms of time by Spartan Blades in collaboration with legendary knife maker William "Bill" Harsey Jr.
The SHF 3.25 is the knife many of you have been waiting for! A reliable 6AL4V titanium frame-lock pocket knife with a handcrafted 3.25" damascus steel blade made by Chad Nichols. Easy to carry and comfortable in the hand, this is a truly exceptional knife. Constructed like its award-winning big brother the SHF 3.25 is made entirely of 6AL-4V titanium, except for the pivot, blade and arbor.
This medium-sized folding knife features a reversible pocket clip and two thumb studs that allow it to be carried in either the right or left hand. If you are looking for a high-quality, well-designed folding knife, this is one you should consider!
Intended Use: Collector/Sportsman
Type of manufacture: MidTech
Country of manufacture: USA
Blade: handcrafted stainless damascus steel, by Chad Nichols
Blade treatment: -
Handle: titanium 6AL4V
Blade length: 82.5mm.
Blade thickness: 3.2mm.
Length closed: 98.5mm.
Total length: 181mm.
Weight: 82g.
Closure: FrameLock
Clip: anodized titanium
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William HarseySF10DMBZ -
Spartan Blades - Harsey Difensa - Kydex, DLC Flat Black and Black Micarta - SB19BKBKKYBK - knife
In 1943 a battle was fought between the U.S. and Canadian First Special Service Force and German troops in Italy. Known as the Battle of Monte la Difensa, the courageous performance of the U.S. and Canadian forces on this occasion was essential to the final Allied victory in Italy.
When Canadian Special Forces commissioned Spartan Blades and master cutler William Harsey to produce a blade for them, we knew we wanted to create something special. Our goal was to create a knife that would serve the Special Forces for years to come, both in the northern woods of their homeland and in missions around the world. The result was the Spartan Harsey Difensa, named after the infamous and hard-fought victory achieved through cooperation between Canadian and U.S. forces.
The name refers to the excellent use of this custom tactical knife in the field and on the battlefield. The spearhead profile of this handcrafted knife is flat, with a tapered top edge that provides excellent tip strength, balanced penetration, and cutting power.
The full tang and handle of the Spartan Harsey Difensa allow for neutral balance in the user's hand. Combined with the ergonomic Micarta canvas handle, modified from our Model II, with no rear joints, this custom combat knife provides the griper with a comfortable and secure grip in both dry and wet conditions.
After more than 40 years of service in the U.S. Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had already been designing and drawing knives for his friends in the Special Forces for years, and Mark, who had always been involved in military and tactical equipment when he served in the "Green Berets," decide to combine their skills and passion with the goal of building innovative and functional knives using the highest quality materials and made entirely in the United States.
Intended Use: Tactical/Military
Production Type: Mid Tech
Country of Production: USA
Blade: stainless steel CPM-S45VN 59/61HRC
Blade Finish: PVD Tungsten DLC Flat Black
Handle: Canvas Micarta
Blade length: 159mm.
Blade thickness: 4.8mm.
Total length: 295mm.
Balance: on the guard branch
Weight: 325g.
Sheath: thermoformed Kydex.
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William HarseySB19BKBKKYBK