Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Red Claw - Panthera Training Knife Blue - marker knife - training knife
Marker training knife, ideal tool for training in the various personal defense disciplines, military training or to be used for soft air.
Thanks to the marker placed on the edge, at the tip and for 2 cm on the back of the blade, it is possible to mark the affected area with extreme precision.
Intended use: training and sports use
Type of production: Industrial
Country of production: Italy
Materials: 15% glass fiber reinforced Nylon plastic material
Blade length: 90mm.
Blade thickness: 8mm.
Total length: 225mm.
Weight: 120g.
Sheath: 15% glass fiber reinforced Nylon plastic with belt clip and possibility of 360° rotation
Packaging: knife, sheath, screwdriver, ink refill, interchangeable plastic blade, 2 fiber blades for marker use
Notes: Design by Roberto RisicatoSpecifications:
* autonomy of one recharge up to 400 cuts
* 1.5 mm thick stainless steel insert to give rigidity and weight
* custom logo
* red ink
* washable non-toxic and anti-allergenic ink
* red ink* serrated blade to distinguish
- threat - - - - - -
- assault -----------* 15% glass fiber reinforced Nylon plastic material
* interchangeable blade
- fiber for marker use
- plasticFor multiple purchases the training knife can be customized with logos
RC-PT-T-BL -
Red Claw - Panthera Training Knife Black - marker knife - training knife
Marker training knife, ideal tool for training in the various personal defense disciplines, military training or to be used for soft air.
Thanks to the marker placed on the edge, at the tip and for 2 cm on the back of the blade, it is possible to mark the affected area with extreme precision.
Intended use: training and sports use
Type of production: Industrial
Country of production: Italy
Materials: 15% glass fiber reinforced Nylon plastic material
Blade length: 90mm.
Blade thickness: 8mm.
Total length: 225mm.
Weight: 120g.
Sheath: 15% glass fiber reinforced Nylon plastic with belt clip and possibility of 360° rotation
Packaging: knife, sheath, screwdriver, ink refill, interchangeable plastic blade, 2 fiber blades for marker use
Notes: Design by Roberto RisicatoSpecifications:
* autonomy of one recharge up to 400 cuts
* 1.5 mm thick stainless steel insert to give rigidity and weight
* custom logo
* red ink
* washable non-toxic and anti-allergenic ink
* red ink* serrated blade to distinguish
- threat - - - - - -
- assault -----------* 15% glass fiber reinforced Nylon plastic material
* interchangeable blade
- fiber for marker use
- plasticFor multiple purchases the training knife can be customized with logos
RC-PT-T-B -
Sergio Consoli - Folder Damascus Spirograph - Timascus and bronze Handle - N ° 454 - handcrafted knives
Intended use: Collection
Type of production: Artisan by CIC Master Sergio Consoli
Production Lama: Italy
Blade: In spirograph damascus steel
Blade treatment: -
Handle: bronze bolsters, timascus with titanium spacers
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 225mm.
Weight: 243g.
Closure: Liner Lock
Clip: titanium
Notes: Handmade by Master Sergio Consoli - knife number 454 made in 2018Acknowledgments
Currently I make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:
in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded as "best table on display"
always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"
I was also ranked second in the competition organized by the magazine LAME D'AUTORE as the best fixed hunting blade
then in 2007 at "Scarperia" I won the third prize for best folding
but above all again in 2007, to my great satisfaction, I reached the degree of MASTER OF THE ITALIAN KNIVING CORPORATION, a recognition received at the first exam.
Presentation of the craftsman
Creating a knife by hand is what I consider a real art form.
The satisfaction of seeing an object that comes from one's own hands, that takes shape and reaches mechanical, artistic and aesthetic perfection is what pays me back the most for all the hours of work and effort it takes to create a knife completely. by hand.The passion for "cutting tools" has always been in me since I was a child and grew with me until the almost sudden decision to build my first knife myself, it was a "need", almost an inner necessity that I couldn't put off, my hands and my mind had to start creating, of course, what I had always been passionate about ... the knife!
I started at 40, in 2003, practically self-taught, I had no experience of manual work, but I had been a mechanical designer for many years and this allowed me to perfectly know the technique and all the various stages of mechanical processing.
Currently I am a member, with the rank of Master, which is the highest, of the Italian Knives Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.
What I do now is what I consider my art form ..., to create "handcrafted, hunting and collectible knives".
They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
I mainly make folding knives, which satisfy my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they are not seen, is what distinguishes a knife created by hand, from one made industrially .The mechanics then must be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.
Of course, over the years I have refined my technique and currently I have improved the mechanics even more by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction. and with an incredible sweetness.
With regard to the blades then, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow an exceptional edge hold and cutting quality for all types of use.
I make practically all the knives on an initial design of mine, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "artisanal".
Regarding the materials I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damascus, both stainless steel and carbon, for the uniqueness 'that give the knife, since each damask is always different from another.
For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of wonderful colors, I also use fossil mammoth ivory, various briars, titanium and carbon fiber.
Most of the knives, however, are made entirely of steel, in order to then be engraved, always and strictly by hand, to transform the knife even more into a real work of art ...
SC-454€0.00Only -50 leftOut of stock -
TRC Knives - Splinter 120 - M390 & Black Canvas Micarta - knife
Intended Use: Hunting / Fishing / Sporting
Production type: Industrial
Country of Production: Lithuania
Blade: Full tang stainless steel M390 60/61HRC
Blade Finish: Satin
Handle: Black Canvas Micarta
Blade length: 120mm.
Blade thickness: 3.4mm.
Total length: 242mm.
Balance: on guard branch
Weight: 140g.
Scabbard: leather
Package: cardboard box with TRC knives logos, certificate of production, TRC sticker,
Notes: -TRC-S120 -
Taidea - Sharpening stone 10000 grit - TP7100 - Synthetic stone
Synthetic water stone to sharpen knives and razors of good quality and with an excellent quality / price ratio.
Equipped with non-slip support with liquid collection tray and additional coarse grit abrasive stone for the maintenance and grinding of the main stone. The kit also includes a small pump to keep the stone hydrated and a support to maintain the agulation of the knife during sharpening.
Type: water sharpening stone made of corundumQuality level: Good
Country of production: China
Grain: # 10000
Stone size: about 200x80x20mm
Notes: equipped with non-slip support, containment tank and support base, grinding stone, hydration pump and sharpening guideL417100€61.48Only 0 leftOut of stock -
Taidea - Sharpening stone 1000/6000 grit - TP6610 - Synthetic Stone
Synthetic water stone to sharpen knives and razors of good quality and with an excellent quality / price ratio.
Equipped with non-slip support with liquid collection tray and additional coarse grit abrasive stone for the maintenance and grinding of the main stone. The kit also includes a small pump to keep the stone hydrated and a support to maintain the agulation of the knife during sharpening.
Type: water sharpening stone made of corundumQuality level: Good
Country of production: China
Grain: double-face # 6000 and # 1000
Stone size: about 200x80x30mm
Notes: equipped with non-slip support, containment tank and support base, grinding stone, hydration pump and sharpening guideL416610€61.48Only 0 leftOut of stock -
TRC Knives - South Pole - Elmax & Black Canvas Micarta - Knife
Intended use: Hiking / Sports / Survival
Type of production: Industrial
Country of production: Lithuania
Blade: full tang in Elmax 60 / 61HRC stainless steel
Blade finish: Satin finish
Handle: Black Canvas Micarta
Blade length: 115mm.
Blade thickness: 4.5mm.
Total length: 235mm.
Balancing: on the guard branch
Weight: 189g.
Sheath: in thermoformed Kydex
Packaging: box with TRC knives logos, manual with signed certificate, TRC sticker, disposable maintenance oil
Notes: each individual copy is numbered - The serial number is stamped on a knife, box and manualTRC-SOP -
TRC Knives - This is Freedom - M390 & Black Canvas Micarta - Knife
Intended use: Hunting / Fishing / Sports
Type of production: Industrial
Country of production: Lithuania
Blade: full tang stainless steel M390 60 / 61HRC
Blade finish: Satin
Handle: Black Canvas Micarta
Blade length: 118mm.
Blade thickness: 3.4mm.
Total length: 240mm.
Balancing: on the guard branch
Weight: 145g.
Sheath: in leather
Packaging: box with TRC knives logos, manual with signed certificate, TRC sticker, disposable maintenance oil
Notes: each individual copy is numbered - The serial number is stamped on a knife, box and manualTRC-TIF -
TRC Knives - Classic Freedom Knife - M390 & Black Canvas Micarta - Knife
Intended use: Hunting / Sports
Type of production: Industrial
Country of production: Lithuania
Blade: full tang in M390 stainless steel 61 / 62HRC
Blade finish: Satin
Handle: Black Canvas Micarta
Blade length: 92mm.
Blade thickness: 2.7mm.
Total length: 205mm.
Balancing: on the guard branch
Weight: 100g.
Sheath: in leather
Packaging: box with TRC knives logos, manual with signed certificate, TRC sticker, disposable maintenance oil
Notes: each individual copy is numbered - The serial number is stamped on a knife, box and manualTRC-CFR -
TRC Knives - Speed Demon - Elmax Skeletonized - Knife
Intended use: EDC / Sportivo / Neck Knife
Type of production: Industrial
Country of production: Lithuania
Blade: full tang in Elmax 60 / 61HRC stainless steel
Blade finish: Satin finish
Handle: in Elmax 60 / 61HRC stainless steel
Blade length: 80mm.
Blade thickness: 4.2mm.
Total length: 180mm.
Balancing: set back
Weight: 70g.
Sheath: in thermoformed Kydex with belt loop
Packaging: box with TRC knives logos, manual with signed certificate, TRC sticker, disposable maintenance oil
Notes: each individual copy is numbered - The serial number is stamped on a knife, box and manualTRC-SDE -
TRC Knives - K-1s Sprint Run - RWL34 & Black Canvas Micarta - Knife
Intended use: Collection / Sports
Type of production: Industrial
Country of production: Lithuania
Blade: full tang in RWL34 62HRC stainless steel
Blade finish: Apocalyptic Finish
Handle: Black Canvas Micarta
Blade length: 99mm.
Blade thickness: 3.5mm.
Total length: 214mm.
Balancing: advanced
Weight: 152g.
Sheath: in leather
Packaging: box with TRC knives logos, signed certificate, TRC sticker, disposable maintenance oil
Notes: limited edition of 150 copies - each individual copy is numbered - The serial number is stamped on a knife, box and certificateTRC-K1S -
TRC Knives - Apocalypse Knife - Elmax & Black Canvas Micarta - Knife
Intended use: Excursion / Sport / Survival
Type of production: Industrial
Country of production: Lithuania
Blade: full tang in Elmax 59 / 60HRC stainless steel
Blade finish: Satin
Handle: Black Canvas Micarta
Blade length: 172mm.
Blade thickness: 6.5mm.
Total length: 300mm.
Balancing: advanced
Weight: 398g.
Sheath: in thermoformed Kydex
Packaging: box with TRC knives logos, manual with signed certificate, TRC sticker, disposable maintenance oil
Notes: each individual copy is numbered - The serial number is stamped on a knife, box and manualTRC-APO -
Nieto Camp 8402 coltello
Destinazione d'uso: Survival/Sportivo
Lama: in acciaio inox AN-58
Manicatura: plastica e metallo
Lunghezza lama: 105mm.
Spessore della lama: 3mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 210mm.
Bilanciatura: arretrata, a 1.5cm dal ramo di guardia inferiore
Peso: 78g.
Chiusura: -
Clip: -
Fodero: in pelle
Note: -nieto8402€31.15Only -99 leftOut of stock -
Sergio Consoli - N°098 Folding Walnut - Custom Knife
Blade: 61HRC RWL34 Stainless Steel
Handle: Walnut, Damascus and Titanium
Blade Lenght: 75mm.
Blade Thickness: 4mm.
Overall Lenght: 180mm.
Weight: 110g.
Lock: Liner lock
Clip: -
Sheath: -
Notes: Handmade in Italy by CIC Master Sergio Consoli9015€729.51Out of stock -
Nieto - Combate 15cm - 184 coltello
Destinazione d'uso: Tattico/Sportivo
Lama: in acciaio inox 440C
Manicatura: Gomma
Lunghezza lama: 155mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 280mm.
Bilanciatura: arretrata, a 1cm dal ramo di guardia inferiore
Peso: 208g.
Chiusura: -
Clip: -
Fodero: in pelle
Note: -2257€37.70Out of stock -
Nieto - Montana 23cm - 4204 coltello
Destinazione d'uso: Tattico/Sportivo
Lama: in acciaio inox AN-58
Manicatura: metallo e plastica
Lunghezza lama: 230mm.
Spessore della lama:4mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 360mm.
Bilanciatura: arretrata, a 1cm dal ramo di guardia inferiore
Peso: 520g.
Chiusura: -
Clip: -
Fodero: in cuoio
Note: -0277€54.92Out of stock -
Nieto - Montana knife 18cm - 4203 coltello
Destinazione d'uso: Survival/Sportivo
Lama: in acciaio inox AN-58
Manicatura: Metallo
Lunghezza lama: 180mm.
Spessore della lama: 3.5mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 310mm.
Bilanciatura: arretrata, a 3.5cm dal ramo di guardia inferiore
Peso: 450g.
Chiusura: -
Clip: -
Fodero: in pelle
Note: -0242€39.34Only -99 leftOut of stock -
Nieto - Toledo 15cm - 2512 coltello
Destinazione d'uso: Survival/Sportivo
Lama: in acciaio inox AN-58
Manicatura: plastica e metallo
Lunghezza lama: 135mm.
Spessore della lama: 3mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 240mm.
Bilanciatura: arretrata, a 1.5cm dal ramo di guardia inferiore
Peso: 78g.
Chiusura: -
Clip: -
Fodero: in pelle
Note: -0241€34.43Out of stock -
Red Claw - Kubo Tac Training tool - kubotan - K139A - plastic material
Intended use: training / sports use
Type of production: Industrial
Country of production: Italy
Materials: 15% glass fiber reinforced Nylon plastic material
Thickness: 18mm.
Total length: 139mm.
Weight: 42g.
Packaging: cardboard box
Note: -What is kubotan, what is it for and what origins does it have?
The yawara (also called pasak or dulodulo in Filipino martial arts) is a Japanese instrument used in various martial arts. It is also called Kubotan, even if the origin of the latter has relevance to the USA police of Los Angeles, who used yawara karate techniques, to form a self-defense tool, useful both to stop any aggressors without bloodshed, and to teach citizens to defend themselves without the use of dangerous tools.
The Yawara originated from the use of Kongou, a Buddhist symbolic object, by monks in feudal Japan. The Yawara takes the form of one or two small, thick sticks that protrude about an inch from each side of the hand. They are usually used in pairs to initiate throws, bone breaks, and pressure point strikes.RC-K139A -
Red Claw - Kubo Tac Training tool with sheath - kubotan - FK139A - plastic material
Intended use: training / sports use
Type of production: Industrial
Country of production: Italy
Materials: 15% glass fiber reinforced Nylon plastic material
Thickness: 18mm.
Total length: 139mm.
Weight: 42g.
Packaging: cardboard box
Sheath: 15% glass fiber reinforced nylon plastic with belt clip and spring attachmentWhat is kubotan, what is it for and what origins does it have?
The yawara (also called pasak or dulodulo in Filipino martial arts) is a Japanese instrument used in various martial arts. It is also called Kubotan, even if the origin of the latter has relevance to the USA police of Los Angeles, who used yawara karate techniques, to form a self-defense tool, useful both to stop any aggressors without bloodshed, and to teach citizens to defend themselves without the use of dangerous tools.
The Yawara originated from the use of Kongou, a Buddhist symbolic object, by monks in feudal Japan. The Yawara takes the form of one or two small, thick sticks that protrude about an inch from each side of the hand. They are usually used in pairs to initiate throws, bone breaks, and pressure point strikes.RC-FK139A