Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

Fällkniven AB celebrates its 40th anniversary in the international knife market with a special version of its bestseller, the F1 Pilot survival knife, now made of high-quality Swedish steel (Elmax). This special model originates from 1987, when the Swedish Air Force commissioned Fällkniven to develop a new survival knife for the technical environment of the JAS 39 Griffin system.

The first delivery of thousands of F1 knives to the Swedish Armed Forces took place in August 1995, and sales to the civilian market began the following year. The success was remarkable: Fällkniven introduced an innovative philosophy for survival knives, in stark contrast to the outdated technologies that had dominated the development of combat and survival knives since World War II.

Intended use: allrounder utility 

Blade: Elmax stainless steel at 61/62HRC, satin-finished, with convex sharpening
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: backward
Weight: 149g.
Sheath: zytel, with anti-extraction safety
Notes: limited edition to celebrate 40 years of the company's business sold in cardboard box with DC4 diamond sharpener

The Fallkniven H1 knife is a very handy knife with impressive strength. The H1 is our first true hunting knife and encapsulates the history of Nordic Scandinavian cutlery art. Because of this heritage, the H1 does not have a standard finger guard, but grip security is improved by the ergonomic thermorun plastic handle.

The special design of the H1 blade is used to work game while hunting. The H1 knife may look different, but it works very well. In many ways, the performance of a knife depends on the person holding it. Knowing where and how to properly carve game goes beyond the knife. Hunters must avoid wrong cuts, keep hair off the meat, avoid cutting organs, and minimize blood flowing onto the game and the hunter. The combination of an experienced hunter and a well-designed knife is unbeatable!

Intended use: hunting

Type of production: Industrial
Country of manufacture: Sweden
Blade: Elmax SuperClean stainless steel at 61/62HRC
Blade finish: Satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 210mm.
Balance: backward
Weight: 175g.
Sheath: made of Zytel
Packaging: white cardboard case with Fallkniven logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used in hiking phase.
* Condition: Used and resharpened, well maintained, with no particular damage or structural defects
* Commercially available: Discontinued and no longer commercially available.
* Sharpening: Re-sharpened
* Marks on blade: Signs of use.
* Marks on handle: Signs of use.
* Box: Present and complete, with DC4 sharpener used
* Scabbard: Present and in excellent condition.
* Manuals, Certificates and Warranties: -.
* Checked and Certified by our in-house laboratory

Intended Use: Hiking / All round utility

Blade: hidden tang, CoS rolled stainless steel at 60HRC
Handle: Thermorun, with stainless steel guard
Blade length: 100mm.
Blade thickness: 7mm.
Total length: 215mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 178g.
Sheath: zytel
Notes: discontinued knife, previously purchased and used - cardboard box with Fallkniven logos, watertight ABS case with Fallkniven logos, used Fallkniven DC4 sharpening stone, accompanied by leather case

The TALOS Folder is a lightweight folding knife with a liner lock, designed by our friend and collaborator William W. Harsey Jr. Its slim and lightweight design makes it the perfect companion for everyday carry and daily tasks. Despite its small size, thanks to its thoughtful design, high-quality CTS-XHP blade, and deep pocket clip, it handles most daily tasks with ease. Whether you're wading through a trout-rich stream or on your way to work, this little knife is ideal.

All our Bronze (Field) grade folding knives incorporate our new "Oil Infused Bronze Bearing System" or "OIBBS". Our sintered bronze bearings are oil-infused, thus reducing friction on the blade, giving you a tight but smooth blade opening. This system is particularly useful for slow speeds, intermittent use, and irregular loads like those found on folding knives.

Intended use: Collection / Sports
Type of production: MidTech
Country of production: Taiwan
Blade: in CTS-XHP steel
Blade treatment: stone wash
Handle: G-10
Blade length: 80mm.
Blade thickness: 3.2mm.
Closed length: 100mm
Total length: 183mm.
Weight: 66g.
Closure: Liner Lock
Clip: in steel
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William Harsey

The POROS flipper was designed by Curtis Iovito as a robust and large-sized flipper. The high grind lines of this blade, combined with a sharp and penetrating tip, make it a reliable companion for everyday carry.

Its quick flipper action is assisted by IKBS bearings for that "Snap" you're looking for! Its distinctive scallops are not only beautiful to look at but also ensure a secure grip. The deep pocket clip maintains a low profile while keeping your blade ready for use when needed. The blade is made of 154CM stainless steel with a black titanium nitride coating; the SS hardware and liner have a black electroplated powder coating.

Intended use: Sports
Type of production: Industrial
Country of production: Taiwan
Blade: in 154CM stainless steel 58/60 HRC
Blade treatment: Black Titanium Nitride Coating
Handle: OD Green G10
Blade length: 89mm.
Blade thickness: 4mm.
Closed length: 97mm
Total length: 230mm.
Weight: 147g.
Closure: Liner Lock
Clip: in stainless steel, removable and reversible
Packaging: cardboard box with Spartan Blades logos. Design: Curtis Iovito
Notes: The Field Grade series with Bronze-colored box identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.

The ASTOR is our first folding knife in collaboration with prolific knife maker Les George, winner of Blade Show 2021 as "Imported Knife of the Year."

The ASTOR was built as a sturdy working knife! With its sturdy G-10 grips, thick liner-lock and high-strength CTS-XHP steel blade, the ASTOR is the perfect knife for those jobs that require a little extra toughness.

All of our Bronze Field Grade productions incorporate our new "Oil Infused Bronze Bushing System" or "OIBBS"! Our sintered bronze bushings are impregnated with oil, which reduces friction on the blade, thus ensuring that the blade opens smoothly, even when firmly held. This system is especially useful for low speeds, intermittent use and irregular loads such as those found on folding knives.

Intended Use: Sporting

Production type: Industrial
Country of manufacture: Taiwan
Blade: CTS-XHP 58/60 HRC stainless steel
Blade treatment: Stonewashed
Handle: Composite made of G10 and Carbon Fiber
Blade Length: 89mm.
Blade thickness: 4mm.
Length closed: 118mm.
Total length: 209mm.
Weight: 145g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Spartan Blades logos
Notes: The Field Grade series with Bronze-colored box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series one can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.

The TALOS Folder is a lightweight folding knife with a liner lock, designed by our friend and collaborator William W. Harsey Jr. Its slim and lightweight design makes it the perfect companion for everyday carry and daily tasks. Despite its small size, thanks to its thoughtful design, high-quality CTS-XHP blade, and deep pocket clip, it handles most daily tasks with ease. Whether you're wading through a trout-rich stream or on your way to work, this little knife is ideal.

All our Bronze (Field) grade folding knives incorporate our new "Oil Infused Bronze Bearing System" or "OIBBS". Our sintered bronze bearings are oil-infused, thus reducing friction on the blade, giving you a tight but smooth blade opening. This system is particularly useful for slow speeds, intermittent use, and irregular loads like those found on folding knives.

Intended use: Collection / Sports
Type of production: MidTech
Country of production: Taiwan
Blade: in CTS-XHP steel
Blade treatment: stone wash
Handle: G-10
Blade length: 80mm.
Blade thickness: 3.2mm.
Closed length: 100mm
Total length: 183mm.
Weight: 66g.
Closure: Liner Lock
Clip: in steel
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William Harsey

The Spartan-Ronin Shōtō is a folding karambit knife with a liner lock. This blade is the result of a collaborative effort between Spartan Blades and TU Lam of Ronin Tactics, our former Special Forces colleague and dear friend.

Having worked throughout Asia and in Indonesia, both Tu Lam and Spartan hold a great respect for the Karambit style. This blade was designed to be incorporated into various martial arts systems.

It features a blade made of CTS-XHP, "Emerson Wave" function for easy opening, and a reversible pocket clip for left-hand carry; the black and red G10 grips ensure a secure grip. Please check this link to Ronin Tactics HERE.

All our Bronze (Field) grade folding knives incorporate our new "Oil Infused Bronze Bearing System" or “OIBBS”. Our sintered bronze bearings are oil-impregnated, thereby reducing friction on the blade, offering you a tight but smooth blade opening.

Intended use: Collection / Sports
Type of production: Industrial
Country of production: Taiwan
Blade: in stainless steel CTS-XHP
Blade treatment: Satin Black Ti/Nitride Finish
Handle: G10
Blade length: 75mm.
Blade thickness: 3.2mm.
Closed length: 135mm
Total length: 200mm.
Weight: 179g.
Lock: Liner Lock
Clip: in steel
Packaging: cardboard box with Spartan Blades logos
Notes: The Field Grade series with Bronze-colored box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series one can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.

On December 9, 1942, during the Second World War, KA-BAR presented a knife to the United States Marine Corps hoping it would become the standard weapon. In collaboration with the Marine Supply Department, the project was revised, and production began on an improved combat and utility knife.

During the war, USMC KA-BAR knives gained such recognition for their quality and abundance that "KABAR" became the common name. It was adopted by the Marines, Army, Navy, Coast Guard, and Underwater Demolition Teams. Years later, many KA-BAR knives were reactivated in Korea, Vietnam, Desert Storm, and the wars in Iraq and Afghanistan.

In 2019, KA-Bar partnered with Spartan Blades to form Pineland Cutlery. CEO John Stitt aimed to create a "KA-BAR" with improved strength, robustness, and corrosion resistance. During development, metallurgist Larrin Thomas identified CPM MagnaCut® steel with the desired qualities.

CPM MagnaCut® is a sintered high-carbon steel produced by Crucible Industries and specifically designed for blades. Spartan Blades developed the Spartan-KA-BAR using CNC machining, cryogenic treatment, and PVD coatings.

Intended Use: Tactical / Military

Production Type: Industrial
Country of Production: USA
Blade: CPM MagnaCut steel 61/63HRC
Blade Finish: ZrN Flat Dark Earth
Handle: Kraton G with stainless steel 301 guard and tungsten DLC treatment
Blade Length: 178mm.
Blade Thickness: 4.2mm.
Total Length: 305mm.
Weight: 306g.
Sheath: Black leather
Packaging: Cardboard box with Spartan Blades logos
Notes: Please note that the Flat Dark Earth (FDE) coated blade, when inserted or removed from the leather sheath, may show streaks or stains due to the dye used for the sheath. The blade can be cleaned with petroleum or acetone, re-oiled (e.g., with WD40 or light mechanical oil), and dried with a clean cloth to restore the original coating finish.

Produced in Olean, NY, in collaboration with the skilled people at KA-BAR knives, the Spartan-Harsey Fighter is born from the partnership between William W. Harsey Jr. and Spartan Blades. The intention behind this knife was to combine the blade of a US military combat/utility knife with the contoured handle that has become a hallmark of Mr. Harsey's designs. This knife is a no-nonsense combat blade.

Intended Use: Tactical / Military

Production Type: Industrial
Country of Production: USA
Blade: 1095 carbon steel 56/58HRC
Blade Finish: Black Powder Coating
Handle: Injection-molded Thermoplastic
Blade Length: 155mm
Blade Thickness: 4.9mm
Overall Length: 292mm
Weight: 334g
Sheath: Thermoplastic, with belt attachment and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by William W. Harsey Jr. - The Professional Grade series with Silver packaging identifies American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with Ka-Bar's production experience to keep prices affordable for the public without sacrificing USA-made production.

Machai - A fitting name for this large cutting tool. In Greek mythology, the Machai were the demons (spirits) of battle and combat.

The high weight and recurved profile of this flat ground blade make it an excellent hatchet. The Machai has a full-tang construction and a handle that ensures a forward balance in the user's hand.

The textured Micarta canvas ergonomic handle ensures a secure and comfortable grip, whether wet or dry. Made by the good people at KA-BAR Knives; in Olean, NY, USA.

Intended use: Tactical / Military

Type of production: Industrial
Country of production: USA
Blade: in 1095 carbon steel 56/58HRC
Blade finish: Black Powder Coating
Handle: CE Canvas Micarta
Blade length: 165mm.
Blade thickness: 4.8mm.
Total length: 295mm.
Weight: 308g.
Sheath: Thermoplastic, multi-position, with M.O.L.L.E compatible belt attachments and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by Iovito - The Professional Grade series with a Silver-colored box identifies American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with the production experience of Ka-Bar to keep public prices affordable without having to give up a made in USA production.

The Harsey TT (Tactical Trout) is designed to be a very comfortable and sturdy medium-sized knife for most field tasks and defensive use. The size of the TT makes it easy to carry and handle.

The blade profile provides a clean cut with excellent tip strength. The full tang and handle of the Harsey TT provide neutral balance in the user's hand. The ergonomically shaped, linen Micarta handle provides a comfortable and secure grip when dry or wet. The pommel has a lanyard hole in the center of the angled tip. The TT is an excellent universal fixed blade, well balanced in size, function and feel. In our opinion, one of William Harsey's best designs.

After more than 40 years of service in the U.S. Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had already been designing and drawing knives for his friends in the Special Forces for years, and Mark, who had always been involved in military and tactical equipment when he served in the "Green Berets," decide to combine their skills and passion with the goal of building innovative and functional knives using the highest quality materials and made entirely in the United States.

Intended Use: Tactical/Military

Production Type: Mid Tech
Country of Production: USA
Blade: stainless steel CPM-S45VN 59/61HRC
Blade finish: ZrN Flat Dark Earth
Handle: Linen Micarta
Blade length: 114mm.
Blade thickness: 4.8mm.
Total length: 229mm.
Balance: on the guard branch
Weight: 209g.
Sheath: thermoformed in Kydex
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William Harsey

This is the latest knife produced in terms of time by Spartan Blades in collaboration with legendary knife maker William "Bill" Harsey Jr.

The SHF 3.25 is the knife many of you have been waiting for! A reliable 6AL4V titanium frame-lock pocket knife with a handcrafted 3.25" damascus steel blade made by Chad Nichols. Easy to carry and comfortable in the hand, this is a truly exceptional knife. Constructed like its award-winning big brother the SHF 3.25 is made entirely of 6AL-4V titanium, except for the pivot, blade and arbor.

This medium-sized folding knife features a reversible pocket clip and two thumb studs that allow it to be carried in either the right or left hand. If you are looking for a high-quality, well-designed folding knife, this is one you should consider!

Intended Use: Collector/Sportsman

Type of manufacture: MidTech
Country of manufacture: USA
Blade: handcrafted stainless damascus steel, by Chad Nichols
Blade treatment: -
Handle: titanium 6AL4V 
Blade length: 82.5mm.
Blade thickness: 3.2mm.
Length closed: 98.5mm.
Total length: 181mm.
Weight: 82g.
Closure: FrameLock
Clip: anodized titanium
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William Harsey

The Moros is an excellent choice for field or tactical use. This well-balanced blade is the perfect blend of size and performance. It's light enough to carry around without hassle, yet sturdy enough to handle a range of everyday tasks. The tip profile is flat with a tapered upper edge ensuring excellent cutting with good penetrating force. The full tang and grip of the Moros provide a neutral balance, making it light in the hand. The ergonomic and textured Micarta canvas grip ensures a comfortable and secure grip whether dry or wet.

After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had been designing and drawing knives for friends in special forces for years, and Mark, who had always dealt with military and tactical equipment while working in the "Green Berets," decided to combine their skills and passion with the goal of building innovative and functional knives using high-quality materials and entirely made in the United States.

Intended use: Tactical/Military

Type of production: Mid Tech
Country of production: USA
Blade: in CPM-S45VN stainless steel 59/61HRC
Blade finish: PVD Tungsten DLC Flat Black
Handle: Canvas Micarta
Blade length: 134mm.
Blade thickness: 4.8mm.
Total length: 254mm.
Balance: on the guard branch
Weight: 203g.
Sheath: thermoformed in Kydex
Packaging: Cardboard box with Spartan Blades logos

The Moros is an excellent choice for field or tactical use. This well-balanced blade is the perfect blend of size and performance. Light enough to carry without bothering, yet strong enough to handle a variety of daily tasks. The tip profile is flat with a tapered top edge that provides an excellent cut with good penetration force. The Moros' solid tang and handle provide neutral balance, making it light in the hand. The ergonomic, textured Micarta canvas handle provides a comfortable and secure grip when dry or wet.

After more than 40 years of service in the U.S. Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had already been designing and drawing knives for his friends in the Special Forces for years, and Mark, who had always been involved in military and tactical equipment when he served in the "Green Berets," decide to combine their skills and passion with the goal of building innovative and functional knives using the highest quality materials and made entirely in the United States.

Intended Use: Tactical/Military

Production Type: Mid Tech
Country of Production: USA
Blade: stainless steel CPM-S45VN 59/61HRC
Blade Finish: PVD Tungsten DLC Flat Black
Handle: Canvas Micarta
Blade length: 134mm.
Blade thickness: 4.8mm.
Total length: 254mm.
Balance: on the guard branch
Weight: 203g.
Sheath: thermoformed Kydex.
Packaging: cardboard box with Spartan Blades logos
Notes: Design by Curtis Iovito

New "Wolf" version using a steel enriched with 1.25% Tungsten (also known as Wolfram in chemistry) which makes the edge tougher, more resilient and provides greater sharpness retention.

Intended use: tactical/military/hunting

Blade: full tang in San-Mai VG-10Wolf / 420J2 59HRC stainless steel
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: set back 2.5cm from the lower guard branch.
Weight: 150g.
Sheath: leather
Notes: official knife of Swedish Air Force pilots since 1995. 

Intended use: Hiking / Hunting

Production type: industrial
Country of Production: Japan
Blade: full tang, stainless steel Elmax at 61/62HRC
Blade finishing: black coating (Tungsten Carbide)
Handle: Thermorun
Blade Length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -

Intended use: Hiking / Hunting

Production type: industrial
Country of production: Japan
Blade: full tang, made of Elmax stainless steel at 61/62HRC
Blade finishing: satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -

Antonini artisans from Maniago have created an exclusive and limited series of OLD BEAR knives using the famous Japanese SANMAI steel in VG10 with 67 layers. This beautiful project combines the tradition of a successful knife, patented and built in Italy, with the history and qualitative excellence of Japanese steel, made with a production process that dates back to that used for the famous Japanese swords.

The thickness of the blade goes from 2 mm of the standard models to 2.5 mm of this exclusive series, in order to make the knife more robust and performing.

To make the knife even more exclusive, for each of the three sizes offered, 60 exclusive pieces have been created, with progressive numbering engraved on the blade

Type of production: semi-artisanal
Production Lama: Italy
Blade: San Mai 67 VG10 damask stainless steel (60/61 HRC)
Handle: in plywood with satin brass ring with nickel plating
Blade length: 100mm.
Blade thickness: 2.5mm.
Closed length: 127mm.
Thick when closed: 22mm.
Total length: 225mm.
Weight: 68g.
Closure: viro block

The handles are made of Italian olive wood. Being a model without return spring, the fixing of the blade to the handle is ensured by a solid safety ring in nickel plated brass equipped with a special locking device (covered by patent n. active partner of this project) which can be activated both in the open and in the closed position.

As early as 1100, expert Japanese blacksmiths combined different materials together to give Katana swords cutting, strength and flexibility previously unknown. Inspired by this tradition, Berkel has created a series of Japanese SanMai steel knives.

The blade consists of a core layer of extremely hard VG-10 steel, which keeps it sharp for a long time, and two outer plates made of 33-layer damask stainless steel per side, for greater resistance to corrosion and torsion.

Characteristics of SanMai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: Collini Steel

Antonini artisans from Maniago have created an exclusive and limited series of OLD BEAR knives using the famous Japanese SANMAI steel in VG10 with 67 layers. This beautiful project combines the tradition of a successful knife, patented and built in Italy, with the history and qualitative excellence of Japanese steel, made with a production process that dates back to that used for the famous Japanese swords.

The thickness of the blade goes from 2 mm of the standard models to 2.5 mm of this exclusive series, in order to make the knife more robust and performing.

To make the knife even more exclusive, for each of the three sizes offered, 60 exclusive pieces have been created, with progressive numbering engraved on the blade

Type of production: semi artisanal
Production Lama: Italy
Blade: San Mai 67 VG10 damask stainless steel (60/61 HRC)
Handle: olive wood
Blade length: 90mm.
Blade thickness: 2.5mm.
Closed length: 120mm.
Thick when closed: 22mm.
Total length: 212mm.
Weight: 65g.
Closure: viro block

The handles are made of Italian olive wood. Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent n. of this project) which can be activated both in the open position and in the closed position.

As early as 1100, expert Japanese blacksmiths combined different materials together to give Katana swords cutting, strength and flexibility previously unknown. Inspired by this tradition, Berkel has created a series of Japanese SanMai steel knives.

The blade consists of a core layer of extremely hard VG-10 steel, which keeps it sharp for a long time, and two outer plates made of 33-layer damask stainless steel per side, for greater resistance to corrosion and torsion.

Characteristics of SanMai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or with a damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: Collini Steel

Antonini artisans from Maniago have created an exclusive and limited series of OLD BEAR knives using the famous Japanese SANMAI steel in VG10 with 67 layers. This beautiful project combines the tradition of a successful knife, patented and built in Italy, with the history and qualitative excellence of Japanese steel, made with a production process that dates back to that used for the famous Japanese swords.

The thickness of the blade goes from 2 mm of the standard models to 2.5 mm of this exclusive series, in order to make the knife more robust and performing.

To make the knife even more exclusive, for each of the three sizes offered, 60 exclusive pieces have been created, with progressive numbering engraved on the blade

Type of production: semi artisanal
Production Lama: Italy
Blade: San Mai 67 VG10 damask stainless steel (60/61 HRC)
Handle: in walnut wood
Blade length: 80mm.
Blade thickness: 2.5mm.
Closed length: 109mm.
Thick when closed: 22mm.
Total length: 190mm.
Weight: 46g.
Closure: viro block

The handles are made of antique and oiled walnut wood. Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent n.1187282 filed again in 1985 by the Todesco company of Maniago which is an active partner of this project) which can be activated both in the open position and in the closed position.

As early as 1100, expert Japanese blacksmiths combined different materials together to give Katana swords cutting, strength and flexibility previously unknown. Inspired by this tradition, Berkel has created a series of Japanese SanMai steel knives.

The blade consists of a core layer of extremely hard VG-10 steel, which keeps it sharp for a long time, and two outer plates made of 33-layer damask stainless steel per side, for greater resistance to corrosion and torsion.

Characteristics of SanMai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or with a damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: Collini Steel

Diamond sharpener excellent for recovering the sharpness of blades with particularly hard steels

Rod length of 30cm. and total length of 43cm.
Thermoplastic handle and steel ring.

Quality level: high

Old Bear ™ is the new and exclusive line of pocket knives produced by Antonini from Maniago. This series is characterized by simple and ergonomic shapes, celebrates the 90th anniversary of the company foundation (1925-2015) and is made using traditional production techniques with a high level of manual skills.

Type of production: semi artisanal
Country of production: Italy
Blade: 420 stainless steel 54/56 HRC
Handle: in American walnut wood
Blade length: 70mm.
Blade thickness: 2mm.
Closed length: 115mm.
Thick when closed: 22mm.
Total length: 175mm.
Weight: 55g.
Closure: in brass, with lock both in opening and closing

The handles are made of oiled American walnut wood while the blade made of stainless steel, sharpened and hand-picked on the stone by skilled craftsmen.

Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent n.1187282 filed again in 1985 by the Todesco company of Maniago which is an active partner of this project) which can be activated both in the open position and in the closed position.

This product was built by subjecting the necessary raw materials to artisanal treatments such as to make every single knife unique, original and non-standardized. Any surface irregularities represent the confirmation of our manual processing and do not absolutely affect the operational functionality of the tool.

Support with two different bars, one in ceramic and one in diamond.

The yellow diamond sharpening stone (25 microns) is used to make a fine sharpening, with the white ceramic stone (9 microns) the edge of the knife is polished in order to obtain a razor-sharp edge.

For cleaning, use some dish soap and hot water.

Dimensions of the diamond / ceramic part:

10 cm x 2 cm

Total size open with plastic handle:

22 cm

Closed size:

12 cm x 3 cm

Weight: 65 gr

Diamond sharpening with two different sharpening grits.

The yellow surface consists of titanium and aluminum nitride which greatly prolongs the life of the sharpener. The rough side (44 microns) is used to recover more damaged cutting edges, while the fine side (25 microns) is used for precision sharpening.

For cleaning, use dish soap and warm water.

Like all diamond sharpeners, this whetstone is a little rough at first, but gets smoother after a period of use.

Dimensions of the diamond part:
10 cm x 2 cm

Total open size with plastic handle:
22 cm

Closed size:
12 cm x 3 cm
Weight: 67 gr

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: Japan
Blade: Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Elforyn with stainless steel heads
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed 111mm.
Total lenght: 199mm.
Thickness when closed: 24mm.
Weight: 182g.
Closure: Liner Lock
Clip: stainless steel, removable
Package: cardboard box with Fallkniven logos
Notes: new 2021 version in Elmax steel

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: Japan
Blade: Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Micarta with stainless steel heads
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed 111mm.
Total lenght: 199mm.
Thickness when closed: 24mm.
Weight: 182g.
Closure: Liner Lock
Clip: stainless steel, removable
Package: cardboard box with Fallkniven logos
Notes: new 2021 version in Elmax steel

Intended use: sporting

Type of production: industrial
Blade: Three layers rolled 3G steel (VG2 and SGPS at 62 HRC)
Blade finish: Satin finish
Country of Production: Japan
Handle: Stainless Steel 420J2 and Wood
Blade Length: 77mm.
Blade thickness: 3mm.
Length closed: 103mm.
Total length: 180mm.
Weight: 75g.
Closure: Liner Lock
Clip: Absent
Sheath: Nylon, with Velcro closure
Notes: -

The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, a giant of the American knife guild, who passed away in 2010. 

Intended use: collectible/sporty

Blade: 59HRC Elmax stainless steel
Handle: 420J2 stainless steel and Elforyn inserts
Blade length: 67mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 165mm.
Weight: 72g.
Closure: Liner Lock
Clip: not present
Scabbard: Nylon 
Notes: -

Intended use: Hiking / Utility

Production type: industrial
Country of production: Japan
Blade: hidden tang, Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Thermorun
Blade length: 80mm.
Blade thickness: 4.8mm.
Total length: 181mm.
Balance: set back 2cm. from the guard branch
Weight: 132g.
Scabbard: zytel
Notes: Sharpening convex type

Intended Use: Tactical / Military

Production Type: Industrial
Country of Production: USA
Blade: Carbon steel 1095 56/58HRC
Blade Finish: Black Powder Coating
Handle: CE Canvas Micarta
Blade Length: 139mm.
Blade Thickness: 4.8mm.
Total length: 273mm.
Weight: 255g.
Sheath: Thermoplastic, multi-position, with M.O.L.L.E. compatible belt clip and push-button retention system.
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Note: Design by Iovito/Carey - The Professional Grade series with Silver box, identifies the American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series you can find new products that combine the typical Spartan Blades designs with Ka-Bar's production experience in order to keep prices affordable to the public without having to renounce to a made in USA production.

Intended Use: Neck / Tactical / Military

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-8A 58/60HRC
Blade Finish: Black Powder Coating
Handle: Stainless steel AUS-8A 58/60HRC
Blade Length: 68mm.
Blade thickness: 4.8mm.
Total length: 159mm.
Weight: 80g.
Scabbard: Thermoplastic, multi-position, with push-button retention system.
Package: Cardboard box with Spartan Blades Field Grade logos.
Note: Design by Iovito/Carey - The Field Grade series with Bronze color box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (company formed by Spartan Blades and Ka-Bar). In this series you can find the most iconic Spartan Blades designs offered at very aggressive and competitive prices.

The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, giant of the American cutlers guild, who died in 2010.

Intended use: collection / sports

Blade: Elmax 59HRC stainless steel
Handle: 420J2 stainless steel and Ironwood inserts
Blade length: 67mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 165mm.
Balancing: -
Weight: 72g.
Closure: Liner Lock
Clip: -
Sheath: nylon
Note:

Intended use: Hiking / Hunting / Collection

Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: Thermorun
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 116g.
Sheath: zytel
Note: -

Intended use: Hiking / Hunting / Collection

Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: ironwood
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 149g.
Sheath: zytel
Note: -

Old Bear ™ model specifically produced for mushroom picking thanks to the curved blade and the brush inserted in the handle

Type of production: semi artisanal
Production Lama: Italy
Blade: Tempered Aisi 420 stainless steel - HRC 54/56
Handle: walnut wood handle
Blade length: 65mm.
Blade thickness: 2mm.
Closed length: 130mm.
Thick when closed: 200mm.
Weight: 49g.
Closure: viro block

Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent n.1187282 filed again in 1985 by the Todesco company of Maniago which is an active partner of this project) which can be activated both in the open position and in the closed position.

Old Bear ™ model specifically produced for mushroom picking thanks to the curved blade and the brush inserted in the handle

Type of production: semi-artisan
Lama production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Handle: olive wood handle
Blade length: 65mm.
Blade thickness: 2mm.
Length closed: 130mm.
Thick when closed: 200mm.
Weight: 49g.
Closing: viro block

Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent no.1187282, still filed in 1985 by Todesco di Maniago, an active partner. of this project) which can be activated both in the open and closed positions.

Intended use: Hiking / Hunting / Collection
Type of production: industrial
Origin: Lama: Japan
Blade: in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: ironwood
Blade length: 9.5mm.
Blade thickness: 4.5mm.
Total length: 210mm.
Balancing: set back to 2cm. from the guard branch
Weight: 148g.
Sheath: black leather
Note: -

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
Community

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
Community

Old Bear ™ is the new and exclusive line of pocket knives produced by the Antonini firm from Maniago. This series is characterized by simple and ergonomic shapes, celebrates the 90th anniversary of the company foundation (1925-2015) and is realized by engaging traditional production techniques with a high degree of manual skill.

9377/19 Grafting - Grafting

Type of production: artisan seeds
Lama production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Handle: in walnut wood
Blade length: 75mm.
Blade thickness: 2mm.
Closed length: 109mm.
Thick when closed: 22mm.
Total length: 185mm.
Weight: 42g.
Closure: viro block

The handles are made of antique walnut and oiled wood, while the blade made of stainless steel is sharpened and picked up by hand on the stone by skilled artisan hands.
Being a model without a return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring with a special locking device (covered by patent n.1187282 deposited again in 1985 by the Todesco company of Maniago which is an active partner of this project) that can be activated both in the open position and in the closed position.
Send feedback
History
Saved
Community

Old Bear ™ is the new and exclusive line of pocket knives produced by the Antonini firm from Maniago. This series is characterized by simple and ergonomic shapes, celebrates the 90th anniversary of the company foundation (1925-2015) and is realized by engaging traditional production techniques with a high degree of manual skill.

9327/19 Electrician

Type of production: artisan seeds
Lama production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Handle: in walnut wood
Blade length: 80mm.
Blade thickness: 2mm.
Closed length: 109mm.
Thick when closed: 22mm.
Total length: 190mm.
Weight: 44g.
Closure: viro block

The handles are made of antique walnut and oiled wood, while the blade made of stainless steel is sharpened and picked up by hand on the stone by skilled artisan hands.
Being a model without a return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring with a special locking device (covered by patent n.1187282 deposited again in 1985 by the Todesco company of Maniago which is an active partner of this project) that can be activated both in the open position and in the closed position.

Destination of use: Hiking / Hunting

Blade: hidden tang, in CoS 60mm stainless steel
Country of production: Japan
Handle: Thermorun, with stainless steel guard
Blade Length: 254mm.
Blade thickness: 7.41mm.
Overall length: 387mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 565g.
Sheath: black leather
Notes: Fallkniven cardboard box, ABS sealed cushion with fallkniven logos, Fallkniven DC4 sharpening stone with leather case

Paracord Made in U.S.A. High quality, high resistance.
Indispensable in any outdoor activity, it can also be used to make the knife mow.

Color: Multicam
Length lenght: 15 mt
Weight: 108 gr.
Filaments: 7
Maximum bearable weight: 250kg.

Paracord Made in USA. High quality, high resistance.
Indispensable in any outdoor activity, it can also be used to make the knife mow.

Color: Royal Blue
Length lenght: 15 mt
Weight: 108 gr.
Filaments: 7
Maximum bearable weight: 250kg.

Type of production: artisanal seed
Blade production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Manicure: Olive wood
Blade Length: 100mm.
Blade thickness: 2mm.
Closed length: 127mm.
Closed thickness: 22mm.
Total length: 225mm.
Weight: 67g.
Closure: viro block

"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.

The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: M (19 cm - 7½ ") and L (cm.21 - 8¼") as above analitically presented.

The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.

BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with locking

IMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.

Type of production: artisanal seed
Blade production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Manicure: olive wood handle
Blade Length: 90mm.
Blade thickness: 2mm.
Closed length: 120mm.
Closed thickness: 22mm.
Overall length: 212mm.
Weight: 62g.
Closure: viro block

"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.

The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: S, M, L, XL.

The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.

BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with locking

IMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.

Type of production: artisanal seed
Blade production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Manicure: Multilayer Wood & Italian Flag
Blade Length: 80mm.
Blade thickness: 2mm.
Closed length: 109mm.
Closed thickness: 22mm.
Total length: 190mm.
Weight: 37g.
Closure: viro block

"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.

The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: S, M, L, XL.

The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.

BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with locking

IMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.

Type of production: artisanal seed
Blade production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Manicure: olive wood handle
Blade Length: 70mm.
Blade thickness: 2mm.
Closed length: 97mm.
Closed thickness: 22mm.
Total Length: 170mm.
Weight: 32g.
Closure: viro block

"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.

The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: M (19 cm - 7½ ") and L (cm.21 - 8¼") as above analitically presented.

The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.

BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with locking

IMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.

Type of production: artisanal seed
Blade production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Handle: multilayer handle & Italian flag
Blade Length: 70mm.
Blade thickness: 2mm.
Closed length: 97mm.
Closed thickness: 22mm.
Total Length: 170mm.
Weight: 32g.
Closure: viro block

"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.

The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: M (19 cm - 7½ ") and L (cm.21 - 8¼") as above analitically presented.

The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.

BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with locking

IMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.

Paracord Made in the USA. Excellent quality, high strength.
Indispensable in any outdoor activities, can also be employed to achieve the handle of a knife.

Color: Urban Camo
Coil length: 15 m
Hank Weight: 110 gr.
Filaments: 7
Maximum tolerable weight: 250kg.

Paracord Made in the USA. Excellent quality, high strength.
Indispensable in any outdoor activities, can also be employed to achieve the handle of a knife.

Color: Yellow Fluo
Coil length: 15 m
Hank Weight: 110 gr.
Filaments: 7
Maximum tolerable weight: 250kg.

Gift Box by Antonini designed for the classic Old Bear models with 19cm, 21cm and 23cm blades.
Select in the drop-down menu on the side the right size of the knife to be contained inside.

Made in Italy entirely of wood and cardboard, it gives a touch of class to your knife.

Compatibility:

AE-9307/19LN
AE-9307/21LN
AE-9307/23LN

AE-9307/19LU
AE-9307/21LU
AE-9307/23LU

AE-9307/19MT
AE-9307/21MT
AE-9307/23MT

AE-9303/19MNN
AE-9303/21MNN
AE-9303/23MNN

AE-9303/19MNK
AE-9303/21MNK
AE-9303/23MNK

AE-9305/19LN
AE-9305/21LU
AE-9305/23MNK

9307/17

Type of production: Hand seeds
Production Lama: Italy
Blade: Stainless steel AISI 420 tempered - HRC 54/56
Handle: walnut
Blade length: 70mm.
Blade Thickness: 2mm.
Closed Length: 97mm.
Thick when closed: 22mm.
Overall length: 170mm.
Weight: 34g.
Closing: viro block

"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.

The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: M (19 cm - 7½ ") and L (cm.21 - 8¼") as above analitically presented.

The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.

BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with locking

IMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.

9307/19 M

Type of production: mostly by hand
Production Country: Italy
Blade: Stainless steel AISI 420 tempered - HRC 54/56
Handle: walnut
Blade length: 80mm.
Blade Thickness: 2mm.
Closed Length: 109mm.
Thick when closed: 22mm.
Overall length: 190mm.
Weight: 36g.
Closing: rotating block

"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.

The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: S, M, L, XL.

The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.

BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with locking

IMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.

Old Bear ™ is the new and exclusive line of pocket knives produced by the maniago company Antonini. This series is characterized by simple and ergonomic shapes, celebrating the 90th anniversary of the company foundation (1925-2015) and is realized by engaging traditional production techniques with a high level of manual skills.

9307 / 21L

Type of production: semi-handmade
Lama production: Italy
Blade: Tempered Aisi 420 stainless steel - HRC 54/56
Handle: in walnut wood
Blade length: 90mm.
Blade thickness: 2mm.
Length closed: 120mm.
Thick when closed: 22mm.
Total length: 212mm.
Weight: 60g.
Closure: viro block

The sleeves are made of antique walnut and oiled, while the blade made of stainless steel, is sharpened and manually reworked on the stone by skilled craftsmen hands.

Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring with a special locking device (covered by patent n.1187282 filed again in 1985 by the company Todesco di Maniago which is active partner of this project) can be activated both in open position and in closed position.

Type of production: Hand seeds
Production Lama: Italy
Blade: Stainless steel AISI 420 tempered - HRC 54/56
Handle: walnut
Blade length: 100mm.
Blade Thickness: 2mm.
Closed Length: 127mm.
Thick when closed: 22mm.
Overall length: 225mm.
Weight: 66g.
Closing: viro block

"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.

The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: M (19 cm - 7½ ") and L (cm.21 - 8¼") as above analitically presented.

The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.

BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with locking

IMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.

Recommended use: Barbecue, Vegetable, Raw Meat, Fish

Steel: Stainless Laminate CoS 60 HRC
Production Lama Japan
Overall length: 292mm.
Blade length: 180mm.
Blade thickness: 2.5mm.
Type of sharpening: flat
Type of construction: laminated with riveted handle
Handle: birch burl
Maintenance: not dishwasher safe
Packaging: bag with zip in leather and leather sheath marked Fallkniven

Stone pocket , for sharpening , with a side ceramic 1 micron ( grain 15000 ) and with one side to the diamond 25 micron ( 600 grit ) . It has the shape of a folding knife , with quick-release mechanism with safety lock to prevent accidental opening . The closure is done by pressing and releasing the button opening .

Never before has it been so nice sharpen your knife! Not only does the new FlipStone is fun to hold and handle, but these stones for sharpening ceramic and diamond are able to create an incredible on any kind of knife sharpening .

The side of the diamond has a treatment TAN ( Alumina Titanium Nitride ) while the ceramic side is made from synthetic sapphires . Both materials are extremely durable and long lasting and come in 8 and 10 hardness on the Mohs scale ; both are able to remain perfect and long lasting , so as to ensure the best possible result , also of special steels or sintered with extremely high hardness .

The stones are joined together using special adhesives 3M and can not be separated in any way . They can be used dry or with a little water and soap or acuqa to keep the surfaces clean. If at first glance there may appear to be excessively rough , do not worry gradually become smooth with use and will improve more and more as the years to come.

Stone Size : 25x65 mm .
Open length : 165 mm.
Closed length : 98 mm .
Handle: Zytel

Accompanied by spacers, spring replacement and a handy wrench to unscrew the handles . Weights and dimensions, ideal to take with you on a trip if for quick but effective sharpening .

Quality level : High

<p>Sharpening stone benches, with side diamond medium-grained and fine-grained ceramic side.</p>
<p>Dimensions of 55mm in width, 210mm in length and 6mm in thickness</p>
<p>Great for sharpening knives and kitchen knives sports a high level: the diamond allows a quick sharpening, suitable for everyday use on sports knives and hiking, while the ceramic allows you to work slowly ensuring a finish more accurate, especially on kitchen knives.</p>

Paracord Made in USA. Ottima qualità, elevata resistenza.
Indispensabile in ogni attività outdoor, può anche essere impiegato per realizzare la manicatura di un coltello.

Colore: desert camo
Lunghezza matassa: 15 mt
Peso matassa: 106 gr.
Filamenti: 7
Peso massimo sopportabile: 250kg.

Paracord Made in USA. Ottima qualità, elevata resistenza.
Indispensabile in ogni attività outdoor, può anche essere impiegato per realizzare la manicatura di un coltello.

Colore: woodland (terreno boschivo) camo
Lunghezza matassa: 15 mt
Peso matassa: 110 gr.
Filamenti: 7
Peso massimo sopportabile: 250kg.

Paracord Made in USA. Ottima qualità, elevata resistenza.
Indispensabile in ogni attività outdoor, può anche essere impiegato per realizzare la manicatura di un coltello.

Colore: ACU - Army Combat Uniform (standard dell'esercito U.S.A.)
Lunghezza matassa: 15 mt
Peso matassa: 108 gr.
Filamenti: 7
Peso massimo sopportabile: 250kg.

Paracord Made in USA. Ottima qualità, elevata resistenza.
Indispensabile in ogni attività outdoor, può anche essere impiegato per realizzare la manicatura di un coltello.

Colore: arancione neon
Lunghezza matassa: 15 mt
Peso matassa: 94 gr.
Filamenti: 7
Peso massimo sopportabile: 250kg.

Pocket Stone Diamond medium grain, excellent for quickly sharpen knives and multi-purpose sports while outdoors.

Mounted on a practical nylon support, has dimensions of 20x60mm

Intended Use: Tactical / Military

Blade: full tang stainless steel San-Mai VG-10/420J2 59HRC coated black Ceracoat 8H
Handle: Kraton
Blade length: 160mm.
Blade thickness: 6mm.
Length closed:-mm.
Total length: 280mm.
Balance: advanced to 0.5cm. the branch of lower guard
Weight: 305g.
Closing: -
Clip: -
Sheath: Zytel tactical
Notes:

Survival knife - News from the Swedish company larger than the A1 model.

Thanks to its extreme solidity, strength and hardness, it lends itself easily to the most extreme and hard.

- Steel blade VG10 from 200 mm to a thickness of 6 mm
- Total length 330 mm
- Weight 380 grams
- Black leather sheath