Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Lionsteel - T.R.E. Three Rapid Exchange - Carbon Fiber - PRIVATE COLLECTION - M390 - Knife
Type: Previously purchased and used
Condition: In excellent condition
Availability: Available for purchase
Sharpening: Resharpened
Blade marks: NO
Handle marks: small marks on the clip
Box: Original and present, made of cardboard
Sheath: Not included
Manuals, Certificates, and Warranties: Included
Inspected and Certified by our internal laboratory
Usage: Sports/CollectionType of production: Industrial
Country of production: Italy
Blade: Bohler M390 steel 60/61HRC
Blade finish: Bead blasted and matt
Handle: Carbon Fiber and Titanium
Blade length: 74mm
Blade thickness: 3.5mm
Total length: 175mm
Weight: 62g
Lock: Titanium Frame Lock with steel stopper
Clip: 6Al4V Titanium
Packaging: Cardboard box with LionSteel logos
Notes: IKBS ball-bearing opening with Carson flipper systemAP-TRE-FC -
MKM - Flame Light by Zieba - M390 & Green Micarta - FL02L-GC - knife
FLAME LIGHT, practical folding knife and now even lighter!
BOHLER M390 dark stone washed steel dagger point blade, flipper opening with ball bearing rotation mechanism and Liner lock system. Stonewashed stainless steel spacer and clip, stainless steel hardware and ring on bronze anodized titanium center pin. Black canvas micarta handle. Sold with zippered nylon sheath and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: Bohler M390 stainless steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 72mm.
Blade thickness: 2.5mm.
Total length: 176mm.
Weight: 55g.
Opening: Carson Flipper system
Washers: steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Sheath: cordura
Packaging: Cardboard box with MKM logos
Notes: Design by Michael ZiebaMK-FL02L-GC -
Master of Defense - Hornet Black Serrated - James Keating Design - PRIVATE COLLECTION - folding knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Slight: a few small scratches and abrasions on corners and clip; small oxidation marks on hardware
* Box: Present and original (full set).
* Scabbard: -
* Manuals, Certificates and Warranties: Present (full set)
* Checked and Certified by our in-house laboratory
Tactical knife/EDC produced in the late 1990s and designed by martial arts expert James Keating,
Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.
Intended Use: Tactical/Collection
Production Type: Industrial
Country of manufacture: USA
Blade: stainless steel 154CM
Handle: aircraft grade aluminum with non-slip Kraton inserts
Blade length: 75mm.
Blade thickness: 3.5mm.
Length closed: 107mm.
Total length: 183mm.
Thickness when closed: 13mm
Weight: 90g.
Closure: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with Master of Defense logosMOD-HORNET-CP -
Franco Bonassi - Titanium Front Flipper Custom M390 - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available On order
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Packaging: Zip pouch, original
* Scabbard: Leather, pocket size, original
* Manuals, Certificates and Warranties: Certificate of guarantee and authenticity present.
* Checked and Certified by our in-house laboratory
Intended use: sports/collection
Type of production: handcrafted
Country of production: Italy
Blade: stainless steel M390 60/61HRC
Blade finish: satin finish
Handle: titanium
Blade length: 176mm.
Blade thickness: 2.5mm.
Length closed: 99mm.
Total length: 175mm.
Weight: 64g.
Closure: Frame Lock
Clip: removable, titanium
Scabbard: Leather pouch
Packaging: Zip pouch and certificate of authenticity and warranty
Notes: Designed and made entirely by hand in Italy by Franco "Frank" Bonassi, Decemnre 2019 example with serial number T27 - Previously purchased, from private collectionAP-FRANK-TI -
MKM - Flame Light by Zieba - M390 & Black Micarta - FL02L-BC - knife
FLAME LIGHT, practical folding knife and now even lighter!
BOHLER M390 dark stone washed steel dagger point blade, flipper opening with ball bearing rotation mechanism and Liner lock system. Stonewashed stainless steel spacer and clip, stainless steel hardware and ring on bronze anodized titanium center pin. Black canvas micarta handle. Sold with zippered nylon sheath and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: Bohler M390 stainless steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 72mm.
Blade thickness: 2.5mm.
Total length: 176mm.
Weight: 55g.
Opening: Carson Flipper system
Washers: steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Sheath: cordura
Packaging: Cardboard box with MKM logos
Notes: Design by Michael ZiebaMK-FL02L-BC -
MKM & Mercury - Makro 1 knife Drop by Vox - Natural Micarta - MK MA01-NC - sports knife
Intended use: Sports
Type of production: Industrial by Mercury
Country of production: Maniago - Italy
Blade: full tang in stainless steel M390 59/61 HRC
Blade treatment: Stone washed
Handle: Natural Micarta
Blade length: 75mm.
Total length: 165mm.
Blade thickness: 4mm.
Weight: 67g.
Sheath: black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Jesper VoxnaesMK-MA01-NC -
MKM & Mercury - Makro 1 knife Drop by Vox - Black G10 - MK MA01-GBK - sports knife
Intended use: Sports
Type of production: Industrial by Mercury
Country of production: Maniago - Italy
Blade: full tang in stainless steel M390 59/61 HRC
Blade treatment: Stone washed
Handle: G10
Blade length: 75mm.
Total length: 165mm.
Blade thickness: 4mm.
Weight: 72g.
Sheath: black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Jesper VoxnaesMK-MA01-GBK -
MC Thiers - AX1 Vintage Knife - Green Stamina Wood - PRIVATE COLLECTION - knife
Knife from private collection - Vintage model (presumably early 90's) from Maison Coutellerie Thiers - In very good condition, never used for cutting, still shows some small signs of wear due to past time - Supplied with original leather sheath, with some small signs of wear - Checked and certified by our in-house laboratory.
Intended Use: Collection/SportsmanType of manufacture: Industrial
Country of Production: France
Blade: Stainless steel Z70CD15 (440A)
Blade finish: satin-finished
Handle: stainless steel and dark green stamina wood
Blade length: 70mm.
Blade thickness: 2.5mm.
Total length: 175mm.
Weight: 95g.
Closure: Back Lock
Clip: not present
Sheath: leather, with belt loop
Notes: knife from private collection in excellent conditionMCT-AX1-GSW -
MKM - Edge - SlipJoint by Graciut - Titanium Bronze - MKEG-TBR - knife
Intended Use: Sporty / Gentleman / EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade Treatment: Satin
Handle: Titanium
Blade length: 76mm.
Blade thickness: 2.5mm.
Length closed: 102mm.
Total lenght: 174mm.
Thickness when closed: 12mm.
Weight: 72g.
Opening: two hands
Washers: Brass
Closure: Slip Joint
Clip: -
Scabbard: leather, with belt loop with magnetic release
Package: Cardboard box with logos MKM Maniago Knife Makers
Notes: Design by Bruno Bruna Graciut, Master CIC (Italian Knife Makers Guild)MK-EG-TBR -
MKM - Edge - SlipJoint by Graciut - Aluminium Green - MKEG-AGR - knife
Intended Use: Sporty / Gentleman / EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: Satin
Handle: Aluminium
Blade length: 76mm.
Blade thickness: 2.5mm.
Length closed: 102mm.
Total lenght: 174mm.
Thickness when closed: 12mm.
Weight: 53g.
Opening: two hands
Washers: Brass
Closure: Slip Joint
Clip: -
Scabbard: leather, with belt loop with magnetic release
Package: Cardboard box with logos MKM Maniago Knife Makers
Notes: Design by Bruno Bruna Graciut, Master CIC (Italian Knife Makers Guild)MK-EG-AGR -
MKM - Edge - SlipJoint by Graciut - Aluminium Black - MKEG-ABK - knife
Intended Use: Sporty / Gentleman / EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: Satin
Handle: Aluminium
Blade length: 76mm.
Blade thickness: 2.5mm.
Length closed: 102mm.
Total lenght: 174mm.
Thickness when closed: 12mm.
Weight: 53g.
Opening: two hands
Washers: Brass
Closure: Slip Joint
Clip: -
Scabbard: leather, with belt loop with magnetic release
Package: Cardboard box with logos MKM Maniago Knife Makers
Notes: Design by Bruno Bruna Graciut, Master CIC (Italian Knife Makers Guild)MK-EG-ABK -
MKM - Flame by Zieba - M390 PVD & Red Lava Fat Carbon - FL02-FCLTD - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: Bohler M390 stainless steel
Blade finish: Black PVD
Handle: Titanium PVD and Fat Carbon Red Lava
Blade length: 72mm.
Blade thickness: 2.5mm.
Total length: 176mm.
Weight: 61g.
Opening: Carson Flipper system
Washers: steel, with ball bearings
Closure: Frame Lock
Clip: PVD stainless steel, removable and reversible
Sheath: cordura
Packaging: Cardboard box with MKM logos
Notes: Design by Michael ZiebaMK-FL02-FCLTD -
MKM & Viper - Timavo Flipper by Vox - Green Micarta - VP02-GC - knife
A rippled surface, a wide loop, the crest of a wave: with its clear and harmoniously multifaceted design, Timavo suggests the multiple forms of flowing. - Knife made by Viper
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: M390 58 / 60HRC stainless steel
Blade treatment: Stonewashed
Handle: Stainless steel and Green Canvas Micarta
Blade length: 68mm.
Blade thickness: 3mm.
Total length: 183mm.
Weight: 110g.
Closing: Liner Lock
Clip: stainless steel, flush
Packaging: nylon pouch with zip and cardboard box with MKM Maniago Knife Makers logos
Notes: Carson Flipper opening system on ball bearings - Design by Jesper VoxnaesMK-VP02-GC -
MKM - Clap by Bob Terzuola - titanium and G10 - MKLS01-GTBK - knife
Folding knife made by Lion Steel with BÖHLER M390 MICROCLEAN satin steel blade, opening with removable pinball and two-handed opening nail, rotation mechanism with ball bearings. Stainless steel liner lock, spacer and solid anodized titanium blue clip, stainless steel screws with anodized blue titanium rotating pin. Available in eight versions that differ in the materials used for the handle: carbon fiber, black G10, olive wood, Santos wood. For each of these materials, versions with or without titanium plates are available.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Grip: black G10 grips and titanium braces
Blade length: 76mm.
Blade thickness: 3.5mm.
Weight: 130g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Bob Terzuola - Knife manufactured by Lion SteelMK-LS01-GTBK -
Chris Reeve - Small Sebenza Knife - S35VN Steel - PRIVATE COLLECTION
Knife withdrawn from private collection - In like-new condition, complete with certificates, original box, maintenance key. 2014 model - Inspected and certified by our internal laboratory, Coltelleria Collini.
WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased and Used
Condition: like new
Availability in the market: made in 2014
Sharpening: Factory standard
Blade marks: NONE
Handle marks: NONE
Box: Included
Sheath: Not included
Manuals, Certificates, and Guarantees: Yes
Inspected and Certified by our internal laboratory
Intended use: collectionType of production: Mid-Tech
Country of production: USA
Blade: in S35VN stainless steel 58/59HRC
Handle: titanium
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 100mm.
Total length: 175mm.
Thickness when closed: 10mm.
Weight: 81g.
Lock: Frame Lock
Clip: removable, titanium
Packaging: white cardboard box with Chris Reeve logos and warranty certificatesAP-CR-SS -
Chris Reeve - Small Sebenza Knife - Unique Graphic Black Onyx - BG42 Steel - PRIVATE COLLECTION
Knife retired from a private collection - In excellent condition, complete with certificates, original box, maintenance key. A rare specimen from 1998, made of BG42 steel with exquisite titanium handle artwork. Checked and certified by our in-house Coltelleria Collini laboratory.
KNIFE RETIRED FROM PRIVATE COLLECTION
Type: Previously Purchased and Used
Condition: In excellent condition
Commercial availability: Item produced in 1998
Sharpness: Factory sharpness
Blade marks: None
Handle marks:
Box: Present
Sheath: Cordura
Manuals, Certificates, and Warranties: Yes
Checked and Certified by our in-house laboratory
Intended Use: CollectionProduction Type: Mid-Tech
Country of Production: USA
Blade: BG-42 Stainless Steel 60/61HRC
Handle: Polished Titanium with Computerized "Unique Graphic" Black Onyx Cabochon
Blade Length: 75mm.
Blade Thickness: 3mm.
Closed Length: 100mm.
Overall Length: 175mm.
Closed Thickness: 10mm.
Weight: 81g.
Lock: Frame Lock
Clip: Removable, Titanium
Packaging: White cardboard box with Chris Reeve logos and warranty certificatesCR-SS21APUG -
Lionsteel - T.R.E. Titanium - K390 Sprint Run - PRIVATE COLLECTION - TRE K390 - Knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used.
* Condition: Overall in good condition.
* Commercially available Not available (limited run sprint run in K390 steel).
* Sharpening: Re-sharpened
* Marks on blade: Small marks, especially near the tip, left side
* Marks on handle: Signs of wear on the titanium clip, a major scratch on the right side of the handle, above the frame
* Box: Present and original, in cardboard.
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting/Collection
Type of Production: Industrial
Country of Production: Italy
Blade: In cold work tool steel Bohler K390 hardened to 64/65HRC
Blade finish: Microbead blasted and matted
Handle: Titanium
Blade length: 74mm.
Blade thickness: 3.5mm.
Total length: 175mm.
Weight: 74g.
Closure: Titanium Frame Lock with steel clapper
Clip: Titanium 6Al4V
Packaging: Cardboard box with LionSteel logos
Notes: Opening on IKBS ball bearings with carson flipper system - DIffers from the standard model in both the steel used, the upper blade profiling, the finish of the blade, the packaging, and the lack of possibility to customize the opening system by removing the flipper - previously purchased knife from a private collectionLS-3K390 -
Lionsteel - SR2-G - Titanium Grey - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Used, but in good condition
* Commercially available Discontinued
* Sharpening: Professionally re-sharpened.
* Marks on blade: Signs of wear on tip, right side.
* Marks on handle: Some slight marks on tang, wear marks on removable clip
* Box: Comes with original box
* Scabbard: -
* Manuals, Certificates and Warranties: Supplied with original warranty and accessories.
* Checked and Certified by our in-house laboratory
Intended Use: Sporting/Tactical
Production Type: Industrial
Country of Production: Italy
Blade: Sleipner steel 60/61HRC
Blade finish: satin-finished
Handle: Titanium 6Al4V monolithic
Blade length: 75mm.
Blade thickness: 4mm.
Total length: 180mm.
Thickness when closed: 9mm.
Weight: 140g.
Closure: Frame Lock with Rotoblock security system
Clip: removable and reversible, stainless steel
Packaging: wooden box with Lion Steel logos
Notes: discontinued item, previously purchased, from private collectionAP-LS-SR2-G -
Quartermaster - QTR-3 Templeton Face Peck - Limited Edition - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like New
* Commercially available: Discontinued since 2014, limited to only 150 numbered pcs.
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present - Original
* Scabbard: -
* Manuals, Certificates and Warranties: Warranty certificate with serial number, date of manufacture and signature.
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / EDC
Production Type: Industrial
Country of Production: USA
Blade: sintered stainless steel CPM-154CM
Blade Finish: Stone Washed
Handle: G10
Blade length: 70mm.
Blade thickness: 5mm.
Total length: 178mm.
Thickness when closed: 17mm.
Weight: 190g.
Closure: Subliminal Frame Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Quartermaster logos, warranty certificate with date of manufacture, serial number and signature
Notes: ORB Pivot System ball bearing opening system - 2014 limited edition specimen of only 150, individually numbered on blade and box (specimen number #91)QTR-3-CP -
Rick Hinderer Knives - XM-18 - Spanto 3" Gen II - Black G10 Scales - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available: Discontinued, replaced by later Gen.
* Sharpening: Professionally re-sharpened.
* Marks on blade: A few small abrasions.
* Marks on handle: Small marks on hardware and clip.
* Box: No
* Scabbard: -
* Manuals, Certificates and Warranties: No
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / Collection
Type of production: Midtech (semi-craft)
Country of manufacture: USA
Blade: Stainless steel CPM-20CV
Blade treatment: Stonewashed
Handle: 2mm-thick black G10 glove on 1mm-thick 6AL4V titanium liner. Frame in 6AL4V titanium, billet, 3mm thick with Hinderer Lockbar Stabilizer. 17-4PH stainless steel spacers and hardware.
Blade length: 76mm.
Blade thickness: 3mm.
Length closed: 105mm.
Total length: 178mm.
Thickness when closed: 13mm.
Weight: 100g.
Closure: frame lock type
Clip: stainless steel 17-4PH
Notes: knife from private collection, previously purchasedXM18-3-CP -
MKM & Mercury - Makro 1 knife Drop by Vox - Naked - MK MA01-N - sports knife
Intended use: Sporty
Type of production: Industrial by Mercury
Country of Production: Maniago - Italy
Blade: Full tang in M390 59/61 HRC stainless steel
Blade treatment: Stone washed
Handle: Naked
Blade length: 75mm.
Total length: 165mm.
Blade thickness: 4mm.
Weight: 48g.
Sheath: Black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Jesper VoxnaesMK-MA01-N -
MKM & Mercury - Makro 2 knife Sheepsfoot by Vox - Natural Micarta - MK MA02-NC - sports knife
Intended use: Sporty
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Full tang in M390 59/61 HRC stainless steel
Blade treatment: Stone washed
Handle: Natural Micarta
Blade length: 75mm.
Total length: 165mm.
Blade thickness: 4mm.
Weight: 66g.
Sheath: Black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Jesper VoxnaesMK-MA02-NC -
MKM & Mercury - Makro 2 knife Sheepsfoot by Vox - Naked - MK MA02-N - sports knife
Intended use: Sports
Type of production: Industrial by Mercury
Country of production: Maniago - Italy
Blade: full tang in stainless steel M390 59/61 HRC
Blade treatment: Stone washed
Handle: Naked
Blade length: 75mm.
Total length: 165mm.
Blade thickness: 4mm.
Weight: 50g.
Sheath: black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Jesper VoxnaesMK-MA02-N -
ExtremaRatio - BF1TD Black - PRIVATE COLLECTION - knife
Knife withdrawn from private collection - "TD" version now discontinued and no longer available - Overall in good condition - Shows small marks on both blade and handle, but nothing that compromises its actual use - Original factory sharpening still in good condition, definitely can be improved - Accompanied by original Extrema Ratio box and certificates and warranties - Checked and certified by our in-house laboratory.
Type of manufacture: industrial
Blade: stainless steel N690Co 58HRC
Country of manufacture: Italy
Handle: Anticorodal
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 99mm.
Total length: 168mm.
Weight: 82g.
Closure: Liner Lock
Clip: reversible and removable stainless steel
Notes: knife withdrawn from private collection, overall in good conditionER-BF1TDBK-CP -
ExtremaRatio - MF0 Black Drop Rough - PRIVATE COLLECTION - folding knife
Knife withdrawn from private collection. Overall in good condition shows small marks on clip, hardware and handle - Original factory sharpening in good condition - Complete with original Extrema Ratio cardboard box - Checked and certified by our in-house laboratory.
Intended Use: Tactical/Sportsman
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Finish: Burnishing MIL-C-13924
Handle: rough anticorodal (aluminum)
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 181mm.
Thickness when closed: 15mm.
Weight: 139g.
Closure: Liner Lock, with additional safety catch
Clip: Removable and reversible stainless steel
Packaging: cardboard box with Extrema Ratio logosAP-MF0DR-CP -
Spyderco - Native 5 Salt - FNR Yellow - C41PYL5 - PRIVATE COLLECTION - Knife
Knife withdrawn from private collection. Overall in very good condition, including thread. Complete with original Spyderco cardboard box. Checked and certified by our in-house laboratory Coltelleria Collini.
The very popular Native 5 Lightweight combined with the extraordinary corrosion resistance of the nitrogen-based LC200N steel.
Intended use: Sporting / Collection
Production Type: Industrial
Blade Production: USA
Blade: Nitrogen-based LC200N stainless steel
Blade Treatment: -
Handle: FRN Lightweight
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 102mm.
Total length: 175mm.
Thickness when closed: 15.5mm.
Balance: -
Weight: 70g.
Closure: Back Lock
Clip: Stainless steel
Packaging: Cardboard box with Spyderco logos
Notes: -CP-C41PYL5 -
Spyderco - Native 5 Lightweight Black TiNi - C41PSBBK5 - PRIVATE COLLECTION - Knife
Knife taken from a private collection. Overall in very good condition, including the edge: there are a few small marks on the right side of the blade (see photo). Complete with Spyderco cardboard box but belonging to another Native 5 model (C41SBK5). Checked and certified by our in-house laboratory Coltelleria Collini.
Intended use: Sporting / Collection
Production Type: Industrial
Blade Production: USA
Blade: CPM-S35VN Powder Steel
Blade Treatment: TiNi
Handle: FRN Lightweight
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 102mm.
Total length: 175mm.
Thickness when closed: 15.5mm.
Balance: -
Weight: 70g.
Closure: Back Lock
Clip: Stainless steel
Packaging: Cardboard box with Spyderco logos, however belonging to another Native 5 model (C41SBK5)
Notes: -CP-C41PSBBK5 -
Buck - Model 500 - 1987 Canadian Loon - Limited Edition - PRIVATE COLLECTION - knife
Withdrawn from a private collection, this American Buck Model 500 made in 1987 turns out to be exclusive because of the gold leaf engraving on the blade commemorating the Loon, the iconic swimming bird of Ontario, Canada, and the limited edition of only 250 pieces - Like-new condition, never used, with original Buck warranties and manuals and accompanying 1987 Canadian $1 coin, also dedicated to the Loon - Checked and certified by our in-house Coltelleria Collini laboratory.
Intended Use: CollectionType of production: Industrial
Blade Production: USA
Blade: Engraved 420HC stainless steel
Blade Finish: Polishing
Handle: Walnut wood and Alpacca (Nickel and Silver alloy)
Blade Length: 78mm.
Blade thickness: 2.5mm.
Length closed: 111mm.
Total length: 187mm.
Thickness when closed: 18mm.
Weight: 135g.
Closure: Back Lock
Package: wooden box, original care and maintenance manuals and warranty certificate of the time
Notes: Limited edition made in only 250 numbered examples on the blade (example 169 of 250) - 1987 specimen withdrawn from private collection, in like-new condition.BU-500CL -
Meyerco - The Strut'N'Cut First Production Run by Blackie Collins - PRIVATE COLLECTION - knife
Knife from private collection - Like new, never used, with original box, manuals and warranty certificates in excellent condition - Made in 1997 - "First Production Run" edition - All in mint condition. Checked and certified by our in-house laboratory.
Intended Use: Collector/Sportsman
Type of production: Industrial
Country of Production: USA
Blade: 440 stainless steel at 60HRC
Blade finish: microbead blasting
Handle: Nylon and Glass Fiber
Blade Length: 77mm.
Blade thickness: 2.5mm.
Total length: 195mm.
Weight: 81g.
Closure: Strut'N'Cut (modified back lock) or Slipjoint
Clip: removable and reversible, made of Nylon and Glass Fiber
Packaging: cardboard box with Meyerco logos
Notes: Like-new knife from private collection, dating from 1997 "First Production Run" edition, winner of Most Innovative American Knife of the Year at the Blade Show in AltlantaTrivia:
In 1996 Blackie Collins was inducted into the Cutlery Hall of Fame. - The Strut'N'Cut knife is inspired by the soft suspension of Blackie Collins' Ducati motorcycle - In 1996 he partnered with Bill Meyer to create the Meyerco knife company. The two were immediate pioneers in the knife world, being the first company to launch an assisted-opening knife. Today Meyerco is credited with the invention of the spring-loaded knife. - Blackie Collins holds over 60 patents for knife mechanisms and many design patents for cutlery products. He was a cutlery legend and will be greatly missed.MCSTRH -
Randall Knives - Model Triathlete skeleton Boot knife - PRIVATE COLLECTION - collection knife
Knife withdrawn from a private collection. Condition like new, production dating back to between 1996 and 2005, supplied with Randall artisan leather sheath. Checked and certified by our internal laboratory.
Intended use: hunting / collection
Type of production: artisanal
Production Lama: america
Blade: 440A stainless steel
Blade treatment: -
Handle: -
Blade length: 70mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 165mm.
Balance: set back, at 2cm.
Weight: 89g.
Closure: -
Clip: -
Sheath: Leather
Note:Each Randall model has been thoroughly tested in the field and has been shown to be properly modeled and designed for its particular use. Randall knives are 100% handmade and no two are exactly alike. The demand is so great for all models that it typically takes a few years to get the model ordered directly from Randall.
"Bo" Randall passed away on December 25, 1989 at his home. Bo and his son Gary have run the business side by side for over twenty five years. Gary continues the tradition of handcrafted knives that carry the Randall Made brand along with his children, Jason and Michael.
AP-TRI-SK-RK -
Klotzli - Sailor C Knife Walker design - Titanium - ATS-34 - collection knife
Knife withdrawn from a private collection, in like new condition with original box and certificate - Model dating back to the late 90s "made by Klotzli from the famous American designer Michael Walker. Knife that combines two qualities that are difficult to match, especially in those years; lightness and strength. Elegant gentleness, easy to open and close with one hand thanks to the Liner-Lock system invented by Walker himself
Checked and certified by our internal laboratory Coltelleria Collini.
Intended use: sports / collection
Type of production: industrial
Country of production: Switzerland
Blade: ATS-34 stainless steel
Blade finish: Satin finish
Handle: Titanium
Blade length: 70mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 170mm.
Weight: 74g.
Closure: LinerLock
Clip: in stainless steel, removable
Notes: Design by Michael WalkerAP-KLO-S-W -
Spyderco - UK Penknife - G10 Orange - C94GPOR - PRIVATE COLLECTION - knife
Knife taken from private collection. Out of production (marketed from 2008 to 2010), like new, supplied with original Spyderco box. Checked and certified by our internal laboratory.
Intended use: sporting
Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S30V
Blade treatment: Satin finish
Handle: G-10
Blade Length: 76mm.
Blade thickness: 3mm.
Length closed: 103mm.
Total length: 178mm.
Thickness when closed: 15mm.
Weight: 70g.
Closure: Slipjoint
Clip: removable, stainless steel
Package: cardboard box with Spyderco logos
Notes: discontinued knife (produced from 2008 to 2010) now out of production - like new, taken from private collectionC94GPOR -
MKM - Root Knife by Ansø - Black Aluminum - MKRT-A - knife
Intended use: Sportsman / Gentleman / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: M390 60 / 61HRC stainless steel
Blade treatment: Satin
Handle: Aluminum
Blade length: 70mm.
Blade thickness: 2.5mm.
Closed length: 95mm.
Total length: 165mm.
Thick when closed: 11mm.
Weight: 62g.
Opening: two-handed
Washers: PTFE
Closure: Slip Joint
Clip: absent
Sheath: in leather with belt loop
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Note: -MK-RT-A -
MKM - Flame By Zieba - M390 & Green Micarta - FL02-GCT - Knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: Bohler M390 stainless steel
Blade finish: Stonewashed
Handle: Titanium and Canvas Micarta
Blade length: 72mm.
Blade thickness: 2.5mm.
Total length: 176mm.
Weight: 59g.
Opening: Carson Flipper system
Washers: steel, with ball bearings
Closure: Frame Lock
Clip: stainless steel, removable and reversible
Sheath: cordura
Packaging: Cardboard box with MKM logos
Notes: Design by Michael ZiebaMK-FL02-GCT -
MKM & Mercury - Cellina Slipjoint by Burnley - Titanium and Micarta - MKMY02-GCT - knife
Folding knife made by Mercury, with BÖHLER M390 MICROCLEAN steel blade, satin finish, two-hand opening with eyelet, rotation mechanism with PTFE washers, slip joint system without blade lock, stainless steel screws with ring nut on rotation pin in blue anodized titanium, stainless steel spring.
Intended use: Sportsman / Gentleman / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: M390 60 / 61HRC stainless steel
Blade treatment: Satin
Handle: Sandblasted titanium and Micarta
Blade length: 72mm.
Blade thickness: 2.5mm.
Length closed: 101mm.
Total length: 173mm.
Thick when closed: 11mm.
Weight: 73g.
Opening: two-handed
Washers: PTFE
Closure: Slip Joint
Clip: absent
Sheath: leather with belt loop
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Lucas Burnley - Knife produced by MercuryMKM-MY02-GCT -
MKM & Mercury - Cellina Slipjoint Knife by Burnley - Aluminum - MKMY02-A - knife
Folding knife made by Mercury, with BÖHLER M390 MICROCLEAN steel blade, satin finish, two-hand opening with eyelet, rotation mechanism with PTFE washers, slip joint system without blade lock, stainless steel screws with ring nut on rotation pin in blue anodized titanium, stainless steel spring.
Intended use: Sportsman / Gentleman / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: M390 60 / 61HRC stainless steel
Blade treatment: Satin
Handle: Aluminum
Blade length: 72mm.
Blade thickness: 2.5mm.
Length closed: 101mm.
Total length: 173mm.
Thick when closed: 11mm.
Weight: 53g.
Opening: two-handed
Washers: PTFE
Closure: Slip Joint
Clip: absent
Sheath: leather with belt loop
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Lucas Burnley - Knife produced by MercuryMKM-MY02-A -
MKM & Viper - Timavo Flipper by Vox - Black G10 - VP02-GBK - knife
A rippled surface, a wide loop, the crest of a wave: with its clear and harmoniously multifaceted design, Timavo suggests the multiple forms of flowing. - Knife made by Viper
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: M390 58 / 60HRC stainless steel
Blade treatment: Satin finish
Handle: Stainless steel and G10
Blade length: 68mm.
Blade thickness: 3mm.
Total length: 183mm.
Weight: 111g.
Closing: Liner Lock
Clip: stainless steel, flush
Packaging: nylon pouch with zip and cardboard box with MKM Maniago Knife Makers logos
Notes: Carson Flipper opening system on ball bearings - Design by Jesper VoxnaesMK-VP02-GBK -
MKM & Viper - Timavo Flipper by Vox - Blackwashed Titanium - VP02-TDSW - knife
A rippled surface, a wide loop, the crest of a wave: with its clear and harmoniously multifaceted design, Timavo suggests the multiple forms of flowing. - Knife made by Viper
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: M390 58 / 60HRC stainless steel
Blade treatment: Blackwash
Handle: Titanium Gr. 5 Ti6AI4V Blackwashed
Blade length: 68mm.
Blade thickness: 3mm.
Total length: 183mm.
Weight: 105g.
Closure: Liner Lock
Clip: titanium, machined from solid
Packaging: nylon pouch with zip and cardboard box with MKM Maniago Knife Makers logos
Notes: Carson Flipper opening system on ball bearings - Design by Jesper VoxnaesMK-VP02-TDSW -
Frank Centofante - Mother of Pearl Lockback Gentleman knife - PRIVATE COLLECTION - handmade knife
Knife withdrawn from a private collection - Beautiful and rare knife made in the late 90s by the famous American Knifemaker Frank Centofante, who passed away in 2009 - Like new condition. Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.
Intended use: Collection / Gentleman
Type of production: Artisan
Blade production: USA
Blade: ATS34 stainless steel
Blade treatment: -
Handle: steel and mother of pearl
Blade length: 75mm
Blade thickness: 2.5mm.
Length closed: 103mm.
Total length: 180mm.
Thick when closed: 10mm.
Balancing: -
Weight: 86g.
Closing: Back Lock
Clip: -
Sheath: -
Packaging: -
Notes: rare artisan knife made by the well-known American cutler Frank Centofante who recently passed away, serial number 008CE-008 -
Spyderco - Sage 1 - Carbon Fiber - C123CFP knife
Knife withdrawn from a private collection - Like new condition: never used, never re-sharpened, never carried in pocket, perfect in every detail. Without original box. - Checked and certified by our Collini Cutlery internal laboratory.
Intended use: Sports
Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S30V stainless steel
Blade treatment: satin finish
Handle: carbon fiber
Blade length: 77mm.
Blade thickness: 2.7mm.
Length closed 114mm.
Total length: 181mm.
Thick when closed: 17mm.
Weight: 92g.
Closing: Liner Lock
Clip: removable, multi-position, in stainless steel
Packaging: absent
Notes: knife from private collection, like new, without boxSC123CF-A -
Kevin Wilkins - 2005 New Brittania Linerlock - Jade G11 - Custom knife
Custom by Kevin Wilkins from 2005 from a private collection provided with original certificates signed by the craftsman.
Slight regrinding, perfectly centered blade with good retention from closed, fluid opening movement and blade without any horizontal or vertical clearance once opened. The frame lock engages in the first quarter of the race without any uncertainty and without sticking.
Globally in good condition, it shows some small marks on the G11 handles and on the back and belly of the liners. A small abrasion on the blade, on the right side near the tip of the knife.
Intended use: collection
Type of production: artisanal
Country of production: Germany
Blade: CPM-S90V stainless steel
Finish: Satin
Handle: jade Titanium and G11
Blade length: 75mm.
Blade thickness: 3.8mm.
Length closed: 110mm.
Total length: 188mm.
Thick when closed: 15.8mm
Weight: 158g.
Closure: Liner Lock
Clip: -
Sheath: -
Notes: with original warranty certificates - produced in March 2005 - from a private collectionKW-BRITTANIA -
MKM - Arvenis knife - G10 and aluminum - MKFX01-MG-GY - knife
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Grip: black G10 grips
Blade length: 84mm.
Total length: 203mm.
Blade thickness: 4mm.
Weight: 130g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Knife manufactured by ViperFX01-MG-GY -
MKM - Clap by Bob Terzuola - olive wood - MK-LS01-O - knife
Folding knife made by Lion Steel with BÖHLER M390 MICROCLEAN satin steel blade, opening with removable pinball and two-handed opening nail, rotation mechanism with ball bearings. Stainless steel liner lock, spacer and solid anodized titanium blue clip, stainless steel screws with anodized blue titanium rotating pin. Available in eight versions that differ in the materials used for the handle: carbon fiber, black G10, olive wood, Santos wood. For each of these materials, versions with or without titanium plates are available.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Grip: olive wood grips
Blade length: 76mm.
Blade thickness: 3.5mm.
Weight: 115g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Bob Terzuola - Knife manufactured by Lion SteelMK-LS01-O -
MKM - Clap by Bob Terzuola - titanium and Santos wood - MKLS01-ST - knife
Folding knife made by Lion Steel with BÖHLER M390 MICROCLEAN satin steel blade, opening with removable pinball and two-handed opening nail, rotation mechanism with ball bearings. Stainless steel liner lock, spacer and solid anodized titanium blue clip, stainless steel screws with anodized blue titanium rotating pin. Available in eight versions that differ in the materials used for the handle: carbon fiber, black G10, olive wood, Santos wood. For each of these materials, versions with or without titanium plates are available.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Handle: Santos wood grips and titanium plates
Blade length: 76mm.
Blade thickness: 3.5mm.
Weight: 130g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Bob Terzuola - Knife manufactured by Lion SteelMK-LS01-ST -
MKM - Clap by Bob Terzuola - carbon fiber - MK-LS01-C - knife
Folding knife made by Lion Steel with BÖHLER M390 MICROCLEAN satin steel blade, opening with removable pinball and two-handed opening nail, rotation mechanism with ball bearings. Stainless steel liner lock, spacer and solid anodized titanium blue clip, stainless steel screws with anodized blue titanium rotating pin. Available in eight versions that differ in the materials used for the handle: carbon fiber, black G10, olive wood, Santos wood. For each of these materials, versions with or without titanium plates are available.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Grip: carbon fiber grips
Blade length: 76mm.
Blade thickness: 3.5mm.
Weight: 107g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Bob Terzuola - Knife manufactured by Lion SteelMK-LS01-C -
MKM - Fara by Burnley - Titanium - MKMY01-T - knife
Folding knife made by Mercury, with BÖHLER M390 MICROCLEAN steel blade, satin finish, two-hand opening with fingernail, rotation mechanism with PTFE washers, slip joint system without blade lock, stainless steel screws with ring nut on rotation pin blue anodized titanium, stainless steel spring.
Intended use: Sports / Gentleman / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: Satin
Handle: Titanium
Blade length: 74mm.
Blade thickness: 2.5mm.
Length closed: 117mm.
Total length: 180mm.
Thick when closed: 11mm.
Weight: 90g.
Opening: two-handed
Washers: in steel
Closure: Joint Slip
Clip: -
Sheath: leather pocket with belt loop
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Lucas Burnley - Knife manufactured by MercuryMK-MY01-T -
MKM - Fara by Burnley - olive wood - MKMY01-O - knife
Folding knife made by Mercury, with BÖHLER M390 MICROCLEAN steel blade, satin finish, two-hand opening with fingernail, rotation mechanism with PTFE washers, slip joint system without blade lock, stainless steel screws with ring nut on rotation pin blue anodized titanium, stainless steel spring.
Intended use: Sports / Gentleman / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: Satin
Handle: Titanium and Olive Wood
Blade length: 74mm.
Blade thickness: 2.5mm.
Length closed: 117mm.
Total length: 180mm.
Thick when closed: 11mm.
Weight: 90g.
Opening: two-handed
Washers: in steel
Closure: Joint Slip
Clip: -
Sheath: leather pocket with belt loop
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Lucas Burnley - Knife manufactured by MercuryMK-MY01-O