Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
CRKT - M16-12LE knife Small Law Enforcement Tanto - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: small marks on tip
* Marks on handle: clip slightly marked
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryBlade: Teflon-coated AUS-8 high-carbon 57/58HRC stainless steel
Handle: Zytel grips
Blade length: 76 mm.
Blade thickness: 3 mm.
Total length: 185mm.
Weight: 97g.
Closure: Liner Lock
Clip: Stainless Steel
Notes: equipped with safety catchAP-CM16-12LE -
Zero Tolerance - KVT Folder Knife - MagnaCut & Carbon Fiber - ZT0545 - Knife
The slim profile and carbon fiber handle provide comfortable and lightweight carry for the Zero Tolerance 0545. Moreover, the 0545 model is appropriately sized for serious cutting tasks. The CPM MagnaCut steel blade is balanced and highly performant.
Aesthetically, this ZT Original boasts a clean design without visible screws for the pocket clip.
Produced in the United States, the premium CPM MagnaCut steel of the blade, achieved through powdered metallurgy, excels in edge retention, corrosion resistance, wear resistance, and toughness; the stonewashed finish helps conceal signs of use.
The blade opens easily and effortlessly thanks to the KVT system with ball bearings, washers, and flipper.
Intended use: EDC/Sport/Collection
Production type: Industrial
Blade production: USA
Blade: CPM Magnacut Steel 60-63 HRC
Blade treatment: Stone Wash
Handle: Carbon Fiber and Titanium
Blade length: 81mm
Blade thickness: 2.3mm
Closed length: 109mm
Overall length: 190mm
Weight: 57g
Locking mechanism: Frame Lock
Clip: Removable, multiposition, stainless steel
Packaging: Cardboard box with Zero Tolerance logos
Notes: KVT opening on ball bearingsZT0545 -
Zero Tolerance - Sinkevich Folder - 0450BLUCF - Flipper Knife Blue CF - Knife
As an elegant and refined alternative to the original 0450, Zero Tolerance presents the 0450BLUCF model with that extra touch.
The CPM MagnaCut blade steel represents exceptional toughness, wear resistance, and unparalleled edge retention.
The classic stonewash finish of the blade with ball bearings highlights the robust side of the Frame Lock Folder and complements the blue marbled carbon front handles and the titanium handle area on the back.
With a reversible clip for pocket carry and a lanyard hole. Made in the USA.
Intended use: EDC/Sport/Collection
Production type: Industrial
Blade production: USA
Blade: CPM Magnacut steel
Blade treatment: Stone Wash
Handle: Carbon Fiber and Titanium
Blade length: 82mm
Blade thickness: 3mm
Closed length: 111mm
Overall length: 187mm
Weight: 68g
Locking mechanism: Frame Lock
Clip: Removable, multiposition, stainless steel
Packaging: Cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT opening on ball bearingsZT0450BLUCF -
Zero Tolerance - ZT0006BLK - Limited Edition Sprint Run - CPM-3V & Black G10 - knife
Intended Use: Tactical / Sporting
Production type: Industrial
Country of Production: USA
Blade: full tang in carbon steel CPM-3V
Blade treatment: Black Cerakote
Handle: G10 Black with stainless steel through-guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex, with Nylon belt attachment system, removable
Packaging: cardboard box with Zero Tolerance logos
Notes: limited edition Sprint Run edition (not numbered) designed for the international market onlyZT0006BLK -
CRKT - P.S.D. II (Particle. Separation. Device.) by Hammond - AUS-10 & Brown G10 - 7910 - knife
Jim Hammond's original P.S.D. earned its name (Particle. Separation. Device.) for its ability to cut anything, anywhere. The P.S.D. II brings that same capability to a smaller, more portable folding knife, reducing the overall length by more than an inch. The blade is made of corrosion-resistant AUS10 with assisted opening on IKBS ball bearings that ensure quick and easy one-handed operation.
Intended Use: Tactical / EDC
Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-10A
Blade Treatment: Black Oxide
Handle: G10
Blade Length: 76mm.
Blade thickness: 2.8mm.
Length closed: 101mm.
Total length: 178mm.
Weight: 102g.
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Jim Hammond - Assisted opening via Carson Flipper system and IKBS ball bearing movementC7910 -
CRKT - A.B.C. (All. Bases. Covered.) by Hammond - 12C27 & Black G10 - 2606 - knife
Jim Hammond's A.B.C. (All. Bases. Covered.) makes its return in an even more versatile form. It is now a folder, bringing the varied capabilities of the original fixed blade into a more convenient and compact design. With its assisted opening and IKBS pads, it's always ready for action at any time, while the G10 handle provides a strong grip even in adverse weather conditions.
Intended Use: Tactical
Production Type: Industrial
Country of Production: China
Blade: Sandvik 12C27 stainless steel
Blade treatment: Black Oxide
Handle: G10
Blade Length: 85.9mm.
Blade thickness: 3.1mm.
Length closed: 116mm.
Total length: 203mm.
Weight: 110g.
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Jim Hammond - Assisted opening via Carson Flipper system and IKBS ball bearing movementC2606 -
CRKT - Pilar Large - Blackwashed Frame Lock Flipper by Vox - 5315KS - folding knife
Intended use: Sporting
Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Blackwashed
Handle: Blackwashed stainless steel
Blade length: 67.8mm.
Blade thickness: 3.8mm.
Length closed: 101.5mm.
Total length: 170mm.
Weight: 119g.
Closure: Frame Lock
Clip: Stainless steel, removable
Packaging: Cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5315KS -
CRKT - Overland Compact Knife by T. J. Schwarz - 6277 - knife
The compact folding knife ready to tackle any terrain.
It may be small, but just like the upgraded 4x4 vehicles that inspired its name, the Overland Compact is exaggeratedly built and ready to tackle the toughest conditions. It takes the design cues and materials of the full-size Overland and puts them into an ultraportable format that practically disappears into a pocket. When it's time to stop the convoy and set up camp, this knife can prepare light food and chop up the perfect marshmallow stick.
Intended Use: Sporty
Production type: Industrial
Country of manufacture: China
Blade: D2 steel
Blade treatment: Blackwashed
Handle: G10 and Blackwashed stainless steel
Blade Length: 57mm.
Blade thickness: 3.2mm.
Length closed: 81mm.
Total length: 137mm.
Weight: 88g.
Closure: FrameLock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by T. J. SchwarzC6277 -
CRKT - Squid Compact by Lucas Burnley - 2485K - knife
This small knife is a big deal. The Squid is known as the perfect knife for everyday use, expertly combining simplicity, usability and performance.
Neither brash nor flashy, it is the humble handyman of the knife world: reliable, solid and extraordinarily capable. Now, renowned designer Lucas Burnley has reworked it into a smaller, nimbler version, the Squid Compact. This reasonably priced folding knife is for everyone.
* Assisted opening: The assisted flipper allows rapid blade opening.
* Smooth opening: The IKBS™ ball bearing system ensures maximum smoothness.
* Easy sharpening: High-carbon stainless steel blade sharpens quickly and easily
* Maximum control: Grooves on the back of the blade to ensure a secure and comfortable grip
* Maximum durability: Stainless steel handle withstands heavy use.
* Low profile: Pocket clip ensures safe carrying
* Accessory options: Hole for lanyard or key ring
Intended Use: EDC
Production type: Industrial
Country of manufacture: China
Blade: Stainless steel 8Cr13MoV
Blade Finish: BlackWashed
Handle: BlackWashed stainless steel
Blade Length: 44mm.
Blade thickness: 2.6mm.
Length closed: 74mm.
Total length: 118mm.
Weight: 79g.
Closure: Frame Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Lucas Burnley - IKBS opening system on pinball-type bearings, spring preload assistedC2485K -
CRKT - Tuna Compact by Lucas Burnley - 2522 - knife
The little fish that rules every pond. Though small, the Tuna Compact evokes the power of one of the world's largest and fastest fish.
It takes the subtle elegance of designer Lucas Burnley's original Tuna and shrinks it into an ultra-compact folding knife. With a profile that suggests strong forward momentum and a blade shape that resembles a deep-sea carnivore, this everyday knife slices through packs and boxes faster than a bluefin tuna slices through waves on a taut line.
* Smooth opening: IKBS™ ball-bearing motion allows for a smooth blade opening.
* Easy sharpening: High-carbon stainless steel blade sharpens quickly and easily.
* Easy opening: The thumb engagement pin allows for quick one-handed opening.
* Exceptional grip: G10 handle provides exceptional grip in all conditions
* Brute force: Fame Lock system uses a thick locking bar to hold the blade in place
* Low profile: Pocket clip ensures safe and secure carrying away from prying eyes
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13MoV
Blade Finish: StoneWashed
Handle: G10 and BlackWashed stainless steel
Blade Length: 69mm.
Blade thickness: 3.6mm.
Length closed: 97mm.
Total length: 163mm.
Weight: 79g.
Closure: Frame Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Lucas Burnley - IKBS ball bearing opening systemC2522 -
CRKT - CEO MicroFlipper Sheepfoot by Rogers - 7083 - knife
The smaller version of the popular CEO folding knife, the Microflipper combines refined style with maximum practicality. It may be small, but it's a serious contender for any job thanks to its lightweight aluminum handle and razor-sharp blade made of Sandvik 12C27™ steel.
This stylish pocket knife is available in two versions: drop-point blade with silver aluminum handle and blue coating, or sheepfoot blade with blue aluminum handle and silver coating.
* Superior performance: Sandvik 12C27™ steel for excellent edge retention.
* Smooth opening: IKBS™ ball-bearing motion allows smooth blade opening.
* Fast opening: Flipper opening system deploys the blade quickly.
* Sturdy and lightweight: Aluminum handle combines strength and minimal weight
* Easy closing: The blade can be easily closed with one hand.
* Carrying options: Adjustable ambidextrous clip for carrying in left or right pocket
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: Sandivk 12C27 stainless steel
Blade Finish: Satin finish
Handle: Aluminum
Blade length: 56mm.
Blade thickness: 2.2mm.
Length closed: 82mm.
Total length: 140mm.
Weight: 48g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - Carson Flipper opening system on IKBS ball bearingsC7083 -
CRKT - CEO MicroFlipper Drop Point by Rogers - 7081 - knife
The smaller version of the popular CEO folding knife, the Microflipper combines refined style with maximum practicality. It may be small, but it's a serious contender for any job thanks to its lightweight aluminum handle and razor-sharp blade made of Sandvik 12C27™ steel.
This stylish pocket knife is available in two versions: drop-point blade with silver aluminum handle and blue coating, or sheepfoot blade with blue aluminum handle and silver coating.
* Superior performance: Sandvik 12C27™ steel for excellent edge retention.
* Smooth opening: IKBS™ ball-bearing motion allows smooth blade opening.
* Fast opening: Flipper opening system deploys the blade quickly.
* Sturdy and lightweight: Aluminum handle combines strength and minimal weight
* Easy closing: The blade can be easily closed with one hand.
* Carrying options: Adjustable ambidextrous clip for carrying in left or right pocket
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: Sandivk 12C27 stainless steel
Blade Finish: Satin finish
Handle: Aluminum
Blade length: 60mm.
Blade thickness: 2.2mm.
Length closed: 82mm.
Total length: 143mm.
Weight: 48g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - Carson Flipper opening system on IKBS ball bearingsC7081 -
Zero Tolerance - ZT0006 - CPM-3V - OD Green G10 - fixed blade, single edge knife, Made in USA
Intended Use: Tactical / Sporting
Type of production: Industrial
Country of manufacture: USA
Blade: full tang in CPM-3V carbon steel
Blade treatment: Microbead blasting and Cerakote protective treatment
Handle: G10 OD Green with stainless steel through-guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex, with Nylon belt attachment system, removable
Packaging: cardboard box with Zero Tolerance logos.
Notes: -ZT0006 -
Zero Tolerance - Tim Galyean - Copper - Factory Special Series - ZT0022CU - knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-20CV
Blade treatment: stone washed
Handle: Bronze and Titanium
Blade length: 49mm.
Blade thickness: 3.1mm.
Length closed: 76mm.
Total length: 122mm.
Thickness when closed: 11.1mm.
Weight: 80g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings via Carson Flipper system - Limited Edition "Factory Special Series"ZT0022CU -
CRKT - Clever Girl Kukri Knife - 2710 - Machete
Intended Use: Hiking / Heavy Duty
Production Type: industrial
Blade: Full Tang in carbon steel SK-5 with Black Powder treatment
Country of Production: Taiwan
Handle: G-10
Blade Length: 196mm.
Blade thickness: 4.8mm.
Total length: 336mm.
Balance: Advanced
Weight: 402g.
Sheath: thermoplastic
Packaging: cardboard box with CRKT logos
Notes: Design by Austin McGlaunCR2710 -
CRKT - Folts Minimalist Drop Point Black - 2384K - Knife
Intended Use: Neck Knife
Production type: Industrial
Country of Production: China
Blade: Stainless steel 5Cr15MoV 55/57HRC
Blade Finish: Blacwashed
Handle: G-10
Blade Length: 55mm.
Blade thickness: 2.6mm.
Total length: 133mm.
Weight: 49g.
Scabbard: Polypropylene
Package: Cardboard box with CRKT logos.
Notes: Design dy Alan FoltsCR2384K -
CRKT - Carson M16-13DSFG Tan Special Forces - PRIVATE COLLECTION - pocket knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A couple of small marks on Tan-colored finish, unnoticeable
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting/TacticalProduction Type: Industrial
Country of Production: China
Blade: Stainless steel AUS-8
Blade Finish: Tan Oxide
Handle: PVD steel folders with G10 Tan grips
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 140mm.
Total length: 240mm.
Weight: 150g.
Opening: Carson Flipper system
Closure: Liner Lock with auto LAWKS security system
Clip: multi-position, removable, Black Oxide stainless steel
Packaging: cardboard box with CRKT logos
Notes: Design by Kit Carson - Carson Flipper opening systemM16-13DSFG-CP -
Zero Tolerance - ZT0990 knife - CPM 20CV - Carbon Fiber - knife
Based on the award-winning ZT 0999, the 0990 simplifies this legendary design. Despite the skeletonized structure, this ZT is reliable and robust thanks to the steel structure.
Intended use: Sports / Tactical / Collection
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber and steel
Blade length: 83mm.
Blade thickness: 3mm.
Closed length: 114mm.
Total length: 193mm.
Thick when closed: 114mm.
Weight: 82g.
Closure: liner lock
Clip: Removable, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: flipper opening system on ball bearings - Manual KVT ball bearingsZT0990 -
Zero Tolerance - ZT0762 knife - CPM 20CV - Carbon Fiber - knife
Intended use: Sports / Tactical / Collection
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Black carbon fiber with aluminum spacers
Blade length: 86mm.
Blade thickness: 3mm.
Closed length: 126mm.
Total length: 206mm.
Thick when closed: 112mm.
Weight: 82g.
Closure: Sub Framelock in hardened steel
Clip: Removable, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: Tuned Detent System (TDS ™) opening systemZT0762 -
CRKT - Techliner Super Shorty - TPENBOND2 - tactical pen
The Techliner™ Super Shorty pen is built to impress with a sleek, ergonomic body and magnetic ends that attach securely to whiteboards, desk legs and workbenches so it's always within reach.
Secure cap: Magnetic ends secure the cap and attach to surfaces
Strong and lightweight: Aluminum handle combines strength with minimal weight
Visually appealing: Blue anodized body
Compact size: Easy to carry
Write anywhere: Ink cartridge developed for extreme environmental conditionsMaterial: 6061 anodized aluminum with stainless steel clip
Rear base: Magnetic
Ink: Black with pressurized Schmidt Refill
Total length: 105mm.
Diameter: 11.7mm.
Weight: 19.8gTPENBOND2 -
CRKT - Freya by Elmer Roush - 2749 - Viking Axe
Intended Use: Sporting / Hiking
Production type: Industrial
Country of Production: Taiwan
Blade: Carbon steel 1055
Blade treatment: manganese phosphate
Handle: Walnut wood
Blade length: 88mm.
Blade thickness: 32mm.
Total length: 483mm.
Weight: 870g.
Scabbard: -
Notes: Design by Elmer RoushCR2749 -
CRKT - Berserker by RMJ Tactical - 2736 - Viking Axe
Intended Use: Sporting / Hiking
Production type: Industrial
Country of Production: Taiwan
Blade: Carbon steel 1055
Blade treatment: manganese phosphate
Handle: Walnut wood
Blade length: 118mm.
Blade thickness: 40mm.
Total length: 483mm.
Weight: 940g.
Scabbard: -
Notes: Design by by Ryan Johnson of RMJ TacticalCR2736 -
CRKT - Compano Carabiner by Bond - 9082 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: Stainless steel 5Cr15Mov
Blade finishing: Satin finish
Handle: 2Cr13 stainless steel with blackwash and bronze finish
Blade length: 37mm.
Blade thickness: 3.6mm.
Length closed: 82mm.
Total length: 117mm.
Weight: 62g.
Closure: Slipjoint
Clip: -
Package: Cardboard box with CRKT logos
Notes: Design by Mike Bond - Snap hook for attachment - Bottle openerCR9082 -
CRKT - Folts Minimalist Cleaver Blackout - 2383K - Knife
Intended Use: Neck Knife
Production type: Industrial
Country of Production: China
Blade: Stainless steel 5Cr15MoV 55/57HRC
Blade Finish: Blacwashed
Handle: G-10
Blade Length: 54mm.
Blade thickness: 2.6mm.
Total length: 129mm.
Weight: 48g.
Scabbard: Polypropylene
Package: Cardboard box with CRKT logos.
Notes: Design dy Alan FoltsCR2383K -
Zero Tolerance - Coyote Flipper Frame Lock - Titanium - ZT0308 - Knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: BlackWash
Handle: Titanium and G10
Blade length: 95mm.
Blade thickness: 4mm.
Closed length: 132mm.
Total length: 241mm.
Weight: 196g.
Closing system: Frame Lock
Clip: removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Note: -ZT0308BLKTS -
CRKT - Pilar III by Vox - 5317 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin finish
Handle: G10 and stainless steel with aluminum spacer
Blade length: 75mm.
Blade thickness: 3.8mm.
Length closed: 108mm.
Total length: 182mm.
Weight: 102g.
Closure: FrameLock
Clip: Stainless steel, removable
Packaging: Cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5317 -
CRKT - Carson M16-03BK - Bronze & Black Oxide - knife
Intended Use: Sporting / Tactical
Production Type: Industrial
Country of Production: China
Blade: Stainless steel 12C27 Sandvik
Blade treatment: Black Oxide
Handle: Stainless steel 2CR13 with nitriding in Bronze
Blade Length: 90mm.
Blade thickness: 3mm.
Length closed: 118mm.
Total length: 209mm.
Weight: 108g.
Opening: Carson Flipper system
Closure: Frame Lock
Clip: Multi-position, removable, in Black Oxide stainless steel
Package: Cardboard box with CRKT logos
Notes: Design by Kit Carson - Carson Flipper opening systemCM16-03BK -
CRKT - CEO Bamboo by Rogers - 7096YGK - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Blackwashed
Handle: Nylon reinforced with fiberglass
Blade length: 79mm.
Blade thickness: 2.2mm.
Length closed: 113mm.
Total length: 194mm.
Weight: 59g.
Closing: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - IKBS ball bearing opening system - Winner of the 2019 Blade Show as "Best Buy Of The Year"C7096YGK -
Zero Tolerance - Flipper Frame Lock - Carbon Fiber - ZT0707 - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Stonewashed
Handle: Titanium and Carbon Fiber
Blade length: 89mm.
Blade thickness: 3.1mm.
Length closed: 117mm.
Total length: 210mm.
Weight: 68g.
Closing system: Frame Lock
Clip: removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Notes: New Tuned Detent System (TDS) which allows easy knife opening, even by exerting pressure on the titanium frame lockZT0707 -
Zero Tolerance - ZT0235 - Jens Anso - Carbon Fiber SlipJoint - knife
Intended use: EDC / Gentleman
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber with anodized aluminum spacer and stainless steel folders
Blade length: 66mm.
Blade thickness: 3mm.
Length closed: 94mm.
Total length: 157mm.
Thick when closed: 10mm
Weight: 51g.
Closure: SlipJoint
Clip: -
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Jens AnsoZT0235 -
Zero Tolerance - SpeedSafe Flipper - BlackWash - ZT0357BW - knife
Intended use: Sports
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV 60 / 62HRC stainless steel
Blade finish: BlackWash
Handle: G-10
Blade length: 82.5mm.
Blade thickness: 3.1mm.
Length closed: 112mm.
Total length: 194mm.
Thick when closed: 11.2mm.
Weight: 122g.
Closing: Liner Lock
Clip: Removable and reversible in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe quick opening via Carson Flipper systemZT0357BW -
Zero Tolerance - SpeedSafe Flipper - Stone Washed - ZT0357 - knife
Intended use: Sports
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV 60 / 62HRC stainless steel
Blade finish: Stone Washed
Handle: G-10
Blade length: 82.5mm.
Blade thickness: 3.1mm.
Length closed: 112mm.
Total length: 194mm.
Thick when closed: 11.2mm.
Weight: 122g.
Closing: Liner Lock
Clip: Removable and reversible in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe quick opening via Carson Flipper systemZT0357 -
CRKT - Tuna Knife by Burnley - 2520 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr14Mov 58/60 HRC stainless steel
Blade treatment: Blackwashed
Handle: G10 and Blackwashed stainless steel
Blade length: 82mm.
Blade thickness: 3.7mm.
Length closed: 114mm.
Total length: 195mm.
Weight: 105g.
Closing: FrameLock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Lucas BurnleyC2520 -
CRKT - Piet by Vox - 5390 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Satin finish
Handle: Nylon reinforced with fiberglass with anodized titanium spacer
Blade length: 68mm.
Blade thickness: 3.3mm.
Length closed: 95mm.
Total length: 164mm.
Weight: 71g.
Closing: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5390 -
Zero Tolerance - Coyote Flipper Frame Lock - Titanium - ZT0308 - Knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Stonewashed
Handle: Titanium and G10
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 132mm.
Total length: 241mm.
Weight: 196g.
Closing system: Frame Lock
Clip: removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Note: -ZT0308 -
Zero Tolerance - ZT0230 - Jens Anso - Carbon Fiber SlipJoint - knife
Intended use: EDC / Gentleman
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber with anodized aluminum spacer and stainless steel folders
Blade length: 66mm.
Blade thickness: 3mm.
Length closed: 94mm.
Total length: 157mm.
Thick when closed: 10mm
Weight: 51g.
Closure: SlipJoint
Clip: -
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Jens AnsoZT0230 -
Zero Tolerance - Tim Galyean knife - Flipper Carbon Fiber - ZT0022 - knife
Intended use: Sports / Collection
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: stone washed
Handle: Carbon Fiber and Titanium with anodized spacers
Blade length: 49mm.
Blade thickness: 3.1mm.
Length closed: 76mm.
Total length: 122mm.
Thick when closed: 11.1mm.
Weight: 50g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings using the Carson Flipper systemZT0022 -
CRKT - Pilar Large by Vox - 5315G - folding knife
Destination of use: Sports
Type of production: Industrial
Country of production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin
Handle: Stainless Steel
Blade length: 67mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 170mm.
Weight: 98g.
Closure: Frame Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5315G -
CRKT - Hi Jinx Z by Ken Onion - K281KXP - PRIVATE COLLECTION - Pocket Knife
KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: like new
* Commercially available: discontinued
* Sharpening: factory sharpened
* Marks on the blade: None
* Marks on the handle: None
* Box: Present
* Scabbard: /
* Manuals, certificates and warranties: Available
* Tested and certified by our in-house laboratory.Intended Use: Sporting
Production Type: Industrial
Country of manufacture: China
Blade: Stainless steel 1.4116
Blade finish: Satin surface
Handle: GFN nylon
Blade length: 84 mm.
Blade thickness: 2.3 mm.
Length closed: 120 mm.
Total length: 203 mm.
Weight: 139 g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Packaging: Cardboard box with CRKT logo
Notes: Ball bearing opening with IKBS system - Opening via Carson pinball system - Design by Ken OnionCK281KXP -
CRKT - Pilar by Vox - 5311 - folding knife
Intended use: Sports / EDC
Type of production: Industrial
Production Country: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin finish
Handle: Stainless Steel
Blade length: 61mm.
Blade thickness: 3.5mm.
Closed Length: 90mm.
Overall length: 151mm.
Weight: 119g.
Lock: Frame Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5311 -
Coltelli - Number 78 - 2016 - magazine
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 82 Pagine
In questo numero:
CUSTOM
Adriano Donzelli, continui miglioramenti
Lame artigianali dall'IndonesiaEVENTI
Achi Show 2016 a Parma
Coltello in festa a Maniago
Damasco in FranciacortaTECNICA
Al lavoro con Milko di Paco
Come ricavare un picchettoIN VETRINA
Nilte Raggio
Lionsteel KUR
Bark River Trakker Companion
Ruger 2-Stage e Go-N-Heavy
Swiza
Extrema Ratio Shrapnel SanMai CoS
Fox Sputnik
Cold Steel Colossus
Affilatoio Zwillingcoltelli-78 -
Coltelli - Number 75 - 2016 - magazine
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 82 Pagine
In questo numero:
CUSTOM
Un Big Bear di Kressler
L'inciso di Loveless
EVENTI
Mostra del coltello custom a Valdobbiadene
Ecck Show 2016
Sguardo al futuro dall'IWA di Norimberga
IN CUCINA
Zwilling serie Four Star
Opinel Art Decò
OUTDOOR
I-Clip
Minox 10x43
IN VETRINA
Extrema Ratio Ti-Rock
Fallkniven S1 Pro
Buck Inertia
Lionsteel Beat e Acorn
Maserin 977 e 978
Fox Ron Lake
Sog SlimJim
Real Steel H6, E77, H5coltelli75 -
Zero Tolerance - Hinderer Slicer Frame Lock - Carbon Fiber - ZT0562CF - knife
Intended use: Tactical / Military
Type of production: Industrial
Production Lama USA
Blade: Stainless steel Elmax
Treatment Blade: Stonewashed
Handle: Stainless Steel and CTS-204P
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 113mm.
Overall length: 206mm.
Thick when closed: 12mm.
Balancing: -
Weight: 160g.
Closure: Frame Lock
Clip: Removable, Multi position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rick Hinderer - KVT Ball Bearing SystemZT0562CF -
Coltelli - Number 72 - October/November 2015 - magazine
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 82 Pagine
In questo numero:
CUSTOM
I rasoi a mano libera di Luca Pizzi
Dario Quartini
Giuseppe Pala
EVENTI
Achi a Parma
Raduno a Vittorio Veneto
Coltello in festa a Maniago
K-Days 2015
TECNICA
Come realizzare il filework
Il damasco ritorto
Victorinox vs. copia cinese
TREND
Flipper mania
IN VETRINA
Helle Utvaer
Antonini Old Bear
Extrema Ratio T-Razor
Gerber Strongarm
Fox B.R.I.
Portachiavi Key-Barcoltelli72 -
Coltelli - Number 71 - August / September 2015 - magazine
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 82 Pagine
In questo numero:
COVER STORY
Bill Moran
PERSONAGGI
Renzo Dessì
EVENTI
Lame sotto i portici
FiCX Paris
Palmas Arborea
Blade Show
TECNICA
I metodi per affilare un coltello
COLLABORAZIONI
Maserin e Atti
Viper e Silverstrelli
IN VETRINA
Fantoni HB03
Benchmade 761Ti
Fox Terzuola
Real Avid Revelation Amp
Kiku Matsuda
Spyderco Dog Tag
Ka-Bar Snody
Zwilling 600S
RUBRICHE
I vostri coltelli
Notizie in brevecoltelli71 -
Zero Tolerance - Sinkevich Folder Titanium - ZT0450 - knife
The original Zero Tolerance 0454 was an award-winning collaboration between ZT and custom knife designer Dmitry Sinkevich. But it was also a very Limited Edition knife.
So ZT is doing something about that with the new 0450. While based on the original’s streamlined form and high-performance function, this new and more compact version will be much more readily available. With its 3.25-inch blade and lightweight-yet-stronger-than-steel titanium handles, the 0450 has a sleek and sophisticated look that, we think, makes it a perfect EDC.
ZT built it with an S35VN stainless blade that sharpens to a razor edge, holds it well, and can be resharpened easily. The knife opens smoothly and easily with the KVT ball-bearing opening system and built-in flipper. A titanium frame lock with hardened steel lockbar insert ensures solid lock up. Polished pivot hardware just adds to the 0450's refined good looks.
Sinkevich Folder Titanium - ZT0450 - knife
Intended use: Sport / Collection
Type of production: Industrial
Production Lama USA
Blade: Stainless steel CPMS35 59 / 61HRC
Treatment Lama: -
Handle: Titanium
Blade length: 82mm.
Blade thickness: 3mm.
Length closed: 111mm.
Overall length: 187mm.
Thick when closed: -
Balancing: -
Weight: 84g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Dmitry Sinkevich - Opening KVT ball-bearingZT450 -
Zero Tolerance - Carbon Fiber Flipper Folder - ZT0770CF - knife
Intended use: Tactical / Military
Type of production: Industrial
Production Country: USA
Blade: Stainless Steel CPM-S35VN 59/61HRC
Treatment Llama: Stonewashed
Handle: Carbon Fibre
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 108mm.
Overall length: 190mm.
Thick when closed: 13mm.
Balancing: -
Weight: 85g.
Lock: Liner Lock
Clip: Removable and multi-position, stainless steel
Packaging: cardboard box with logos Zero Tolerance
Note: Opening system SpeedsafeZT0770CF -
CRKT - Ken Onion Hootenanny - K300KXP - knife
Intended use: Sports
Type of production: Industrial
Production Lama: China
Blade: Stainless steel 8Cr13MoV
Treatment Lama: Satin
Handle: Stainless steel 2Cr13 and grips FRN
Blade length: 85mm.
Blade thickness: 3.5mm.
Length closed: 116mm.
Overall length: 201mm.
Thick when closed: -
Balancing: -
Weight: 136g.
Closure: Frame Lock Stainless Steel 2Cr13
Clip: removable, stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT, Design Ken Onion, opening system with ball bearing type IKBS opening type Carson FlipperCK300KXP -
CRKT - Burnley Squid - 2490 - knife
Intended use: Sports
Type of production: Industrial
Production Lama: China
Blade: Stainless steel 8Cr13MoV
Treatment Blade: Stonewashed
Handle: Stainless Steel 2Cr13
Blade length: 54mm.
Blade thickness: 3mm.
Closed Length: 55mm.
Overall length: 114mm.
Thick when closed: 14mm.
Balancing: -
Weight: 96g.
Closure: Frame Lock Stainless Steel 2Cr13
Clip: removable, stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT, Design Lucas BurnleyC2490 -
CRKT - Carson M16-12ZLEK Law Enforcement Zytel Folding Tanto - knife
Blade: Stainless steel AUS-8 high-carbon 57 / 58HRC Teflon
Handle: Zytel Grips
Blade length: 76 mm.
Blade thickness: 3 mm.
Overall length: 185 mm.
Weight: 102 g.
Lock: Liner Lock
Clip: Stainless Steel
Notes: equipped with safety locks and AutoLAWKS guard Carson Flipper tagliacinture with integrated rear window breakerCM16-12ZLEK -
Coltelli - Number 70 - June / July 2015 - magazine
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 82 Pagine
In questo numero:
Extrema Ratio Psycho e Kato
Bark River Teddy II, Bravo Survivor e Camp & Trail
Fox Zero, Retribution Scout, Battle Chef e Njall
Spyderco Domino
Lionsteel T.R.E.
Victorinox Compact
Zwilling Procoltelli70 -
CRKT - Chanceinhell by Ken Onion - K910KKP - Machete
Destinazione d'uso: Escursionismo/Heavy Duty
Tipo di Produzione: industriale
Lama: in acciaio al carbonio 65Mn a 54/56 HRC con trattamento Black Powder
Produzione Lama Cina
Manicatura: Polimeri TPR e Nylon
Lunghezza lama: 304mm.
Spessore della lama: 2.5mm.
Lunghezza totale: 450mm.
Bilanciatura: avanzata
Peso: 490g.
Chiusura: -
Clip: -
Fodero: in Nylon
Confezione: scatola di cartone con loghi CRKT
Note: Design by Ken OnionCK910KKP -
Coltelli - Numero 62 - Febbraio/Marzo 2014 - rivista
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 82 Pagine
Il fascicolo di febbraio-marzo 2014 è dedicato al Cic show, l’esposizione tenutasi a Milano lo scorso dicembre nella quale oltre ottanta knifemakers hanno esibito i loro pezzi, affascinando e attirando i desideri del migliaio di visitatori della mostra.Nella cover story rivolgiamo la nostra attenzione a Fabrizio Silvestrelli (in arte Silvester), il coltellinaio bresciano che da ormai 20 anni si è specializzato nella realizzazione di coltelli artigianali che colpiscono per la bellezza delle forme, la precisione delle lavorazioni e l’accostamento dei materiali.
Nel mondo custom troviamo anche l’eclettica produzione di Mauro Bonassi, da poco maestro della Corporazione italiana coltellinai, e quella del giovane sardo Davide Steri che è riuscito, attraverso le sue creazioni, a unire sperimentazione e tradizione.
In questo numero potete trovare il reportage sul simposio delle tecniche di forgiatura tenutosi nella suggestiva cornice del maglio di Pagnano d’Asolo, organizzato dal laboratorio La Britola di Valdobbiadene.
Inoltre Coltelli recencisce le lame (in particolare i modelli TSP, TS-1, FM-1, NAV-H e NAV-T) della Medford, coltelli militari prodotti in piccola tiratura negli Usa e i modelli Sierra Foxtrott II e III della Boker, due nuove lame fisse d’impostazione militare che appartengono alla linea Magnum e che offrono un rapporto qualità prezzo davvero inaspettato. Una novità di importazione Tecnocut sono le penne tattiche: oltre a essere accattivanti e ben realizzate, possono contare su un prezzo davvero interessante. Infine una vera chicca. Beretta non significa solo armi da fuoco: la storica Casa gardonese ha a listino un’ampia varietà di coltelli, dall’utility alle lame di pregio da abbinare a un fucile di prestigio disegnate da knifemaker di fama come Silvester (sì, proprio lui, il protagonista della nostra cover story).
coltelli62 -
CRKT - M16-04Z by Kit Carson - knife
Intended use: Sport
Type of production: Industrial
Production Blade: Taiwan
Blade: AUS-8 stainless steel
Treatment Lama: -
Handle: Zytel
Blade length: 94mm.
Blade thickness: 3.5mm.
Closed Length: 134mm.
Total length: 230mm.
Thick when closed: 17mm.
Balance: -
Weight: 182g.
Lock: Liner Lock locking system with self-LAWKS
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos CRKT
Notes: -CM16-04Z -
Coltelli - Numero 58 - Giugno/Luglio 2013 - rivista
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 96 Pagine
È un numero internazionale quello di Coltelli che avete tra le mani. Siamo, infatti, andati a cercare all’estero le tendenze e le soluzioni adottate per superare la grande crisi economica. A partire dalla storia di copertina, che ha per protagonista un bel coltello del danese Jesper Voxnaes, da molti conosciuto come "Vox", incontrato a marzo all’Iwa di Norimberga, la più grande fiera europea dedicata al mondo delle armi. Vox vive a Løgstrup, vicino ai fiordi, nella zona Nord dello Jutland, e costruisce coltelli esteticamente accattivanti ma al contempo utili e funzionali. Lasciamo il filone “belli ma utili” per entrare in quello delle lame da sogno: Coltelli vi accompagna in una delle mostre più ambite a livello mondiale, il Boston Art Knife Classic al quale vengono invitati 20 dei migliori coltellinai a livello mondiale che possono portate al massimo otto lame da mostrare ai 150 collezionisti presenti alla mostra. Più “terrestre” è la mostra di Livorno (rispetto a quella “spaziale” di Boston, naturalmente), organizzata con grande merito, in un periodo così difficile per la coltelleria custom italiana, da Lc Coltelleria e dall’Associazione coltellinai livornese: un segno forte della volontà di continuare a credere nella qualità dei nostri prodotti, tanto apprezzati Oltreoceano. Nel settore della coltelleria sportiva, abbiamo cercato di mostrarvi esempi di bellezza e utilità nel mondo delle lame. Dall’Extrema Ratio Task, nato per compiti gravosi, e dalle pinze multiuso di Leatherman e Victorinox fino ai Böxer Exskelibur 1 e 2 allo Spyderco Pingo, dietro ai quali stanno due knifemaker famosi come il sudafricano Mike Skellern e… il nostro amico Vox.coltelli58 -
Coltelli - Numero 57 - Aprile/Maggio 2013 - rivista
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 96 Pagine
È in edicola il nuovo numero di Coltelli, ricco di numerose novità dal mondo delle lame artigianali e industriali. Tra i knifemaker del numero di aprile/maggio 2013 della rivista, vi presentiamo Antonio Farina, maestro della Corporazione italiana coltellinai, titolo di cui si fregia anche Pietro Elias, l’altro protagonista del mondo custom che abbiamo intervistato. Per quanto riguarda gli eventi, vi parleremo dell’East Cost Custom Show, svoltosi a marzo a New York. Non mancano alcuni scatti ai coltelli esposti alla fiera di Ferrara; inoltre vi è stato a Scarperia il Concorso nazionale per il miglior coltello amatoriale. È un coltello molto speciale quello realizzato da Ted M. Dowell, commissionato dall’organizzatore della prestigiosa Art Knife Invitational, Phil Lobred. Dopo aver affrontato (nello scorso numero) il tema del damasco ritorto, ora tratteremo il damasco esploso: come si forgia e i suoi impieghi. E ancora… tante tante lame: l’Extrema Ratio Pugio, l’americana Ka-bar con i suoi machete (e altre chicche), un multifunzione di Antonini pensato per il personale di soccorso, civile e militare, i nuovi lama fissa di Fantoni (il C.U.T) e Viper (il Carnera). Zwilling ci mette a disposizione la linea completa dei nuovi coltelli da cucina, Beltrame propone una rivisitazione del classico stiletto e da Mora una simpatica e colorata integrazione tra accendifuoco e coltello. Vi presenteremo, infine, le indicazioni e le modalità per partecipare ad una nuova iniziativa di Coltelli: se avete in mente un coltello da tavola, disegnate il progetto e inviatelo alla redazione. Il vincitore potrà vedere materializzarsi in acciaio e legno il suo coltello ideale, e ricevere in premio il primo set da quattro pezzi realizzato. Buona fortuna e… buona lettura!coltelli57 -
Coltelli - Numero 56 - Febbraio/Marzo 2013 - rivista
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 96 Pagine
Non perdetevi il numero di febbraio-marzo 2013 di Coltelli, la principale rivista italiana dedicata al mondo delle lame, artigianali, sportive e da lavoro. In questo numero, un ampio reportage fotografico riporta tutti i pezzi più belli visti allo scorso Cic Show di Milano, la manifestazione organizzata ogni anno dalla Corporazione italiana coltellinai all'hotel Marriott di Milano. Di seguito trovare il sommario del numero in edicola. In copertina: Fallkniven Volcano (foto di Tommaso Rumici e Paolo Sturaro) Editoriale 5 Una sfaccettata passione In libreria 6 Il fumetto militare italiano Lettere 7 Arriva… la posta Cover Story 8 Novità dal fronte svedese Eventi 12 Cic Show 2012 Collezionismo 30 Un nécessaire imperiale Coltelli da caccia 34 Un coltello per tutti Coltelli militari 36 Tre modi di dire militare Novità 40 Largo ai giovani! Eventi 42 Lo stile di Maniago Lame militari 44 La sorella cattiva Test 46 My name is Rold, Vox Rold 60 Dopo l’internazionalità, la tradizione Tecnica 48 Non perdiamo il filo Come si fa 54 Il damasco ritorto Outdoor 62 Per ogni evenienza 63 Arrivano gli S.w.a.t. I Vostri coltelli 65 Lame e calligrafia News 66 Novità e segnalazionicoltelli56 -
Coltelli - Numero 36 - Ottobre/Novembre 2009 - rivista
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 98 Pagine
Ti manca un numero della tua rivista preferita? CLICCA QUI per vedere tutte le riviste disponibili nei nostri magazzini.C2009-36