Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Helle Norway - Utvaer knife by Vox - PRIVATE COLLECTION - No.600 - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In good condition
* Commercially available: YES
* Sharpening: re-sharpened by our in-house laboratory
* Marks on blade: YES, has a number of scratches on the blade
* Marks on handle: None
* Box: Present and complete
* Sheath: Leather sheath
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our internal laboratoryIntended use: hunting/hiking
Type of production: semi-artisanal
Blade: 12C27 stainless steel
Handle: Birch
Blade length: 102mm.
Blade thickness: 3mm.
Total length: 221mm.
Balancing: set back 2.5cm
Weight: 151g.
Sheath: leather
Notes: Design by Jesper VoxnaesAP-HE-600 -
Horl - 2 PRO - diamond and ceramic disc sharpener - Made in Germany
With HORL ® 2 Pro, Otmar and Timo Horl are making a very personal dream come true. With a high precision internal planetary gear, it triples the grinding motion generated by a simple rolling motion. Therefore, HORL ® 2 Pro sharpens at triple speed. The solid components made of stainless steel and aluminum give it a particularly noble appearance.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2PRO -
Horl - 2 OAK - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2QUERCIA -
Horl - 2 WALNUT - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2NOCE -
Horl - 2 CRUISE - sharpener with diamond and steel disc - Made in Germany
The HORL ® 2 CRUISE incorporates our state of the art development with a focus on the essential. A constant sharpening angle, our durable diamond coating and a beautiful "chalk" color make HORL ® 2 CRUISE an all-round talent for sharpness in any kitchen. The 20 ° sharpening angle produces fast sharpening results and a stable cutting edge with long-lasting sharpening.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
FOR STAINLESS STEEL SANDING After the sharpening process with the diamond disc, the stainless steel sanding disc smoothes the blade and removes any burrs with the help of its integrated grooves. Only a few movements are needed. The discs of the HORL ® 2 CRUISE are not editable
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
20 ° SHARPENING ANGLE FOR STABLE SHARPNESS
The 20 ° sharpening angle offers a new sharpness in the shortest possible time. The knife also maintains its sharpness for a long time thanks to the stable cutting edge and is suitable for the widest range of cuts in everyday life in the kitchen. Also excellent for sharpening knives for sports and outdoor use.
THE HORL ® S-PAD FOR CONTINUOUS FLEXIBILITY IN GRINDING
The combination of powerful neodymium magnets and the HORL ® S-Pad ensure that the knife is firmly fixed when sharpening. Reinforced by the non-slip effect of the S-Pad, even small blades can be sharpened correctly by adapting them to the desired height.
HOR-2CRUISE -
Horl - premium sharpening set - 3000 and 6000 stones - strop - SET - Made in Germany
Set consisting of two discs of sharpening stones with # 3000 and # 6000 grit and a leather strop to be used at the end to free the blade of all grinding residues and provide the final sharpening.
The set is designed to further refine the result of the sharpening process after using the diamond and ceramic discs, which are standard in HORL ® sharpeners.
The two discs are simply screwed onto the sharpener instead of the stock ones and are intended to refine the edge of the blade of your high-level knives. The stones can be used without water.
Compatible with HORL ® Sharpener 1. Gen, HORL ® 2 and HORL ® 2 PRO.
This item is not compatible with HORL ® 2 CRUISE.
Strop: Measurements: 25 x 5 cm - Thickness: 5mm
HOR-SET -
Horl - strip of cowhide for sharpening - strop - AL-P - Made in Germany
Original HORL ® leather made from vegetable tanned cowhide for a professional finish after sharpening. Thanks to its fine-pored surface, the blade is perfectly freed from even the finest residues on the edge after sharpening on stone.
Measurements: 25 x 5 cm - Thickness: 5mm
HOR-AL-P -
Helle Norway - Utvaer by Vox - No.600 - knife
Destination: hunting / hiking
Type of production: semi-handicraft
Country of production: Norway
Blade: 12C27 stainless steel
Finishing: mirror polishing
Handle: Birch wood
Blade Length: 102mm.
Blade thickness: 3mm.
Total length: 221mm.
Balance: back to 2.5cm
Weight: 151g.
Sheath: leather
Notes: Design by Jesper VoxnaesHE-600 -
Helle Norway - Les Stroud Temagami Knife - Knife - No.301
Helle Norway - Les Stroud Temagami Knife - Knife - No.301
Intended use: huntingType of production: semi-artisan
Blade: carbon steel laminate shirogami with sharp steel 62HRC
Handle: Birch
Blade length: 110mm.
Blade Thickness: 3mm.
Overall length: 230mm.
Balancing: back to 2.5cm
Weight: 154g.
Sheath: Leather
More information: http://www.lesstroud.ca/HE-301 -
Helle Norway - Jegermester - No.42 knife
Intended Use: Hunting
Type of production: industrial
Blade: stainless steel Sandvik 12C27
Treatment Lama: -
Handle: Birch
Blade length: 135mm.
Blade Thickness: 2.5mm.
Length closed: -
Total length: 250mm.
Balance: back to 2.5cm
Weight: 128g.
Closing: -
Clip: -
Sheath: Leather
Notes: -HE-42 -
Helle Norway - Temagami Les Stroud Knife - coltello - No. 1300
Les Stroud was born in Mimico - Ontario in 1961.
Canadian musician, filmmaker and survival expert, Les Stroud is best known as the creator, writer, producer, director, cameraman and star of the television series 'SurvivorMan'.This knife is a collaboration between Les and the famous Norwegian company Helle.
Intended use: hunting
Type of production: semi-crafted
Blade: Sandvik 14C28N steel
Handle: Birch
Blade length: 110mm.
Blade thickness: 3mm.
Total length: 230mm.
Balance: set back 2.5cm
Weight: 143g.
Sheath: leather
More information: http://www.lesstroud.ca/HE-1300 -
Helle Norway - Vintage Fabrikker Norway knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in excellent condition, it has some marks on the blade from the years
* Available on the market: no longer in production, difficult to find, dating back to the 90s
* Sharpening: Original
* Marks on the blade: small scratches
* Marks on the handle: no
* Box: without box
* Sheath: in brown leather
* Manuals, Certificates and Warranties: absent
* Checked and certified by our internal laboratoryIntended use: hunting
Type of production: industrial
Blade: Sandvik 12C27 stainless steel
Blade treatment: -
Handle: leather discs
Blade length: 150mm.
Blade thickness: 2.5mm.
Closed Length: -
Total length: 270mm.
Balance: set back to 2.5cm
Weight: 220g.
Closure: -
Clip: -
Sheath: leather
Note: -HE-FAB -
Sergio Consoli - Folder Damascus Spirograph - Timascus and bronze Handle - N ° 454 - handcrafted knives
Intended use: Collection
Type of production: Artisan by CIC Master Sergio Consoli
Production Lama: Italy
Blade: In spirograph damascus steel
Blade treatment: -
Handle: bronze bolsters, timascus with titanium spacers
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 225mm.
Weight: 243g.
Closure: Liner Lock
Clip: titanium
Notes: Handmade by Master Sergio Consoli - knife number 454 made in 2018Acknowledgments
Currently I make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:
in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded as "best table on display"
always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"
I was also ranked second in the competition organized by the magazine LAME D'AUTORE as the best fixed hunting blade
then in 2007 at "Scarperia" I won the third prize for best folding
but above all again in 2007, to my great satisfaction, I reached the degree of MASTER OF THE ITALIAN KNIVING CORPORATION, a recognition received at the first exam.
Presentation of the craftsman
Creating a knife by hand is what I consider a real art form.
The satisfaction of seeing an object that comes from one's own hands, that takes shape and reaches mechanical, artistic and aesthetic perfection is what pays me back the most for all the hours of work and effort it takes to create a knife completely. by hand.The passion for "cutting tools" has always been in me since I was a child and grew with me until the almost sudden decision to build my first knife myself, it was a "need", almost an inner necessity that I couldn't put off, my hands and my mind had to start creating, of course, what I had always been passionate about ... the knife!
I started at 40, in 2003, practically self-taught, I had no experience of manual work, but I had been a mechanical designer for many years and this allowed me to perfectly know the technique and all the various stages of mechanical processing.
Currently I am a member, with the rank of Master, which is the highest, of the Italian Knives Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.
What I do now is what I consider my art form ..., to create "handcrafted, hunting and collectible knives".
They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
I mainly make folding knives, which satisfy my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they are not seen, is what distinguishes a knife created by hand, from one made industrially .The mechanics then must be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.
Of course, over the years I have refined my technique and currently I have improved the mechanics even more by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction. and with an incredible sweetness.
With regard to the blades then, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow an exceptional edge hold and cutting quality for all types of use.
I make practically all the knives on an initial design of mine, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "artisanal".
Regarding the materials I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damascus, both stainless steel and carbon, for the uniqueness 'that give the knife, since each damask is always different from another.
For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of wonderful colors, I also use fossil mammoth ivory, various briars, titanium and carbon fiber.
Most of the knives, however, are made entirely of steel, in order to then be engraved, always and strictly by hand, to transform the knife even more into a real work of art ...
SC-454€0.00Only -50 leftOut of stock -
Helle Norway - Skala Foldekniv knife - No.212
Intended use: hunting
Type of production: Industrial
blade production: Norway
Blade: 12C27 stainless steel 59HRC
Blade treatment: -
manicatura: cocobolo wood
Blade length: 85mm.
blade thickness: 3mm.
Closed length: 115
Total length: 200mm.
thick when closed: 1.8 cm
Weight: 117g.
Closing: back lock
Clip: -
Sheath: Brown leather
Packaging: cylindrical cardboard box more cloth cotton branded Helle
Notes: -HE-212 -
Helle Norway - Dokka 3L - No.200 knife
Intended Use: Hunting
Type of production: industrial
Production Blade: Norway
Blade: rolled steel cheeks with 18/8 stainless steel 59HRC and sharp
Treatment Lama: -
Handle: Birch wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 115
Total length: 200mm.
Thick when closed: 1.8 cm
Weight: 130g.
Closure: back lock
Clip: -
Sheath: Brown leather
Packaging: cylindrical cardboard case more cotton cloth marked Helle
Notes: -HE-200 -
Sergio Consoli - N°098 Folding Walnut - Custom Knife
Blade: 61HRC RWL34 Stainless Steel
Handle: Walnut, Damascus and Titanium
Blade Lenght: 75mm.
Blade Thickness: 4mm.
Overall Lenght: 180mm.
Weight: 110g.
Lock: Liner lock
Clip: -
Sheath: -
Notes: Handmade in Italy by CIC Master Sergio Consoli9015€729.51Out of stock -
Helle Norway - Dovre - No.170 coltello
Destinazione d'uso: caccia
Tipo di produzione: industriale
Lama: in acciaio laminato con guance inox 18/8 e tagliente inox 59HRC
Trattamento Lama: -
Manicatura: Betulla e Corian
Lunghezza lama: 70mm.
Spessore della lama: 3mm.
Lunghezza chiuso: -
Lunghezza totale: 170mm.
Bilanciatura: arretrata a 2.5cm
Peso: 58g.
Chiusura: -
Clip: -
Fodero: cuoio
Note: -HE-170 -
Helle Norway - Fjellkniven knife - No.4 knife
Destination of use: hunting
Type of production: industrial
Blade: iin rolled steel with 18/8 stainless steel cheeks and 59HRC stainless steel cutting edge
Blade treatment: -
Handle: Birch
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: -
Total length: 210mm.
Balancing: set back to 2.5cm
Weight: 108g.
Closure: -
Clip: -
Sheath: leather
Note: -HE-4 -
Helle Norway - Harding - No.99 coltello
Destinazione d'uso: caccia/sportivo
Tipo di produzione: industriale
Produzione Lama: Norvegia
Lama: in acciaio laminato con guance inox 18/8 e tagliente inox 59HRC
Trattamento Lama: -
Manicatura: legno di betulla, palissandro ed anelli di cuoio
Lunghezza lama: 99mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: -
Lunghezza totale: 215mm.
Spessore da chiuso: -
Bilanciatura: arretrata, a 1cm.
Peso: 102g.
Chiusura: -
Clip: -
Fodero: in cuoio marrone
Confezione: astuccio cilindrico di cartone più panno in cotone marchiato Helle
Note: -HE-99 -
Helle Norway - Nying - No.55 coltello
Destinazione d'uso: caccia
Tipo di produzione: industriale
Lama: in acciaio laminato con guance inox 18/8 e tagliente inox 59HRC
Trattamento Lama: -
Manicatura: Betulla
Lunghezza lama: 70mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: -
Lunghezza totale: 165mm.
Bilanciatura: arretrata a 2.5cm
Peso: 82g.
Chiusura: -
Clip: -
Fodero: cuoio
Note: -HE-55 -
Helle Norway - Veidemann - No.53 knife
Intended Use: Hunting
Type of production: industrial
Production Blade: Norway
Blade: rolled steel cheeks with 18/8 stainless steel 59HRC and sharp
Treatment Lama: -
Handle: Birch wood
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: -
Total length: 193mm.
Thick when closed: -
Balance: backward, to 1.5cm.
Weight: 98g.
Closing: -
Clip: -
Sheath: Brown leather
Packaging: cylindrical cardboard case more cotton cloth marked Helle
Notes: -HE-53 -
Helle Norway - Wind knife - No.180 knife
Destination of use: hunting
Type of production: industrial
Blade: in stainless steel with 18/8 stainless steel and 59HRC stainless steel edge
Blade treatment: -
Handle: Birch
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: -
Total length: 220mm.
Balancing: set back to 2.5cm
Weight: 96g.
Closure: -
Clip: -
Sheath: leather
Note: -HE-180