Sport, Military and Collectible Knives | Coltelleria Collini

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual; previously purchased and used
* Condition: Structure intact, no functional compromises, fully operational and ready for use. Presence of slight surface marks on the finish and signs of age.
* Available on the market: Discontinued
* Sharpening: Factory-sharpened
* Marks on blade: Slight surface marks on the finish
* Marks on handle: None
* Box: /
* Sheath: Nylon, belt-mounted
* Manuals, Certificates, and Warranties: /
* Inspected and Certified by our in-house laboratory

This Mick Strider-signed BT model features a black blade with a knurled thumb rest, a thickness of 6.4mm, and a full-tang construction to ensure maximum strength and durability.

The handle features green MEFP scales with a lanyard hole and an integrated pry bar on the back. Comes complete with a nylon sheath with a belt loop.

Strider Knives

Founded and run by former military personnel, Strider Knives is a company specializing in the development of cutting tools designed to withstand the most extreme operating conditions. The initial goal was to create a reliable utility knife, built with the highest quality materials yet affordable and easy to maintain by field personnel.

Over time, the brand has established itself as a benchmark in the world of tactical and professional knives, thanks to models developed specifically to meet the needs of military personnel, law enforcement, special operations personnel, hunters, and professional divers. Every design stems from a practical and functional approach, focused on maximum durability and reliability in the field.

Intended Use: Tactical / All-Rounder Utility

Production Type: Midtech
Country of Manufacture: USA
Blade: Full tang, CPM-3V crucible steel
Blade Finish: Black Coating
Handle: G10
Blade length: 161mm.
Blade thickness: 6.4mm.
Overall length: 308mm.
Balance: rear-weighted
Weight: 410g.
Sheath: Nylon, belt-mounted
Packaging: -
Notes: Previously purchased knife, from a private collection

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Origin: Withdrawn from a private individual, previously purchased
* Conditions: in like-new condition
* Available on the market: No longer available
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: /
* Sheath: hand-made leather in good condition
* Manuals, Certificates and Guarantees: No
* Checked and Certified by our internal laboratory

Intended use: collection/sports

Type of production: Handcrafted
Blade production: Cambodia
Blade: mirror-finish DNH7 carbon steel
Blade treatment: brut de forge
Handle: wood and horn
Blade length: approx. 120mm.
Blade thickness: approx. 5.5mm.
Total length: approx. 250mm.
Balance: -
Weight: approx. 228g.
Lock: 1.5cm set back
Sheath: Handcrafted leather
Notes: -

Citadel Knives and Swords is a sword and knife manufacturer based in Phnom Penh, Cambodia. Despite the country's reputation as an exotic and remote location, the company is easily accessible, located close to the city's international airport. The workshop is modest but houses an impressive range of high-quality Japanese swords and knives.

Founded by Dominique Eluere in the 1990s, Citadel has combined the expertise of French and local craftsmen to produce blades that rival the best in the world. Eluere began by training Cambodian blacksmiths to make French table knives, later evolving into the production of Japanese swords.

The quality of Citadel swords is world renowned, thanks to the use of traditional Japanese techniques and a meticulous manufacturing process. Each katana is heat treated, creating a blade with varying hardness along the edge and spine, a hallmark of true katanas. The hilt is fully encased in high-quality stingray leather, a rarity compared to common panels.

Attention to detail extends to every element, with every component custom-made for each blade. This includes the tsuba (sword guard) and habaki (blade collar), both of which are hand-crafted and fitted, ensuring perfect fit and functionality.

In addition to katanas, Citadel also produces European swords and knives, maintaining the same philosophy of quality and functionality. Production is artisanal, with particular attention to polishing and finishing, often done by hand with sandpaper and whetstones.

Citadel is proud of its Cambodian roots, with local workers looking up to Eluere as a father figure and deeply involved in maintaining the company's high standards.

In short, Citadel Knives and Swords represents a perfect fusion of tradition, craftsmanship and innovation, offering products that are truly functional works of art. These tools, while expensive, represent an investment in quality and craftsmanship that is hard to match.

Intended use: sports / collection

Type of production: Artisan
Production Lama: Cambodia
Blade: in DNH7 carbon steel with 40 / 60HRC selective hardening
Blade treatment: -
Handle: stingray leather
Blade length: 90mm.
Blade thickness: 4mm.
Closed length: 120mm.
Total length: 210mm.
Thick when closed: 25mm.
Balancing: -
Weight: 188g.
Closure: liner lock
Clip: -
Sheath: cordura bag
Packaging: -
Note: -

Intended use: sports / collection

Type of production: Artisan
Production Lama: Cambodia
Blade: in DNH7 carbon steel with 40 / 60HRC selective hardening
Blade treatment: -
Handle: Water Buffalo Horn
Blade length: 95mm.
Blade thickness: 4mm.
Closed length: 137mm.
Total length: 205mm.
Thick when closed: 23mm.
Balancing: -
Weight: 146 g.
Closure: folding with friction
Clip: -
Sheath: Cordura bag
Packaging: -
Note: -

Citadel - Nordic

These handmade knives are distinguished by their original but functional line, which is well matched to the traditional manufacturing techniques and the materials used.
The blades are in fact carbon-hardened to a hardness of around 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire tempered at 60 HRC to have excellent cutting capacity, penetration and flexibility. The knife is then polished and sharpened by hand on stone and finished in every single detail.

Blade: DNH7 "Bruit de forge" selective hardening 40/60 HRC steel with file-worked spine
handle: In wood with brass guard
Blade length: 70 mm.
Handle length: 115 mm.
Blade thickness: 3.5 mm.
Total length: 195 mm.
Sheath: Handmade brown leather
Weight: 154 g.

aikuchi

processing
The blades are carbon-hardened to a hardness of about 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire is tempered at 60 HRC to have excellent cutting capacity, penetration and flexibility. The blade is then polished and sharpened by hand on stone and the knife is finished in every single detail.

Type of production: Artisan
Country of production: Cambodia
Steel: carbon DNH7, hand forged, with hardened clay tempered at 60 / 40HRC
Habaki: copper
Tsuka: samekawa (breed skin)
Saya: Lacquered wood and water buffalo horn
Blade length: 170mm. (including habaki)
Total length: 275mm.
Weight: 210g. without saya

Note: Since these are handmade items and differ slightly in finishes from one another, the knife you ordered may not be identical to the one shown in the images.

Intended use: collection / sports

Type of production: Artisan
Production Lama: Cambodia
Blade: DNH7 carbon steel
Blade treatment: -
Handle: Water Buffalo Horn
Blade length: about 76mm.
Blade thickness: about 3mm.
Closed length: about 103mm.
Total length: about 180mm.
Thick when closed: about 15mm.
Balancing: -
Weight: about 120g.
Closure: without blade lock
Clip: -
Sheath: cordura bag
Packaging: -
Note: -

Intended Use: Tactical

Type of production: Semi-Craft
Production Lama USA
Blade: Stainless steel CPM-S30V
Treatment Blade: Tiger Stripe
Handle: with G10 scales with titanium liners 2mm
Blade length: 103mm.
Blade thickness: 5mm.
Length closed: 137mm.
Total length: 240mm.
Thick when closed: 18mm.
Balance: -
Weight: 244g.
Lock: Liner Lock
Clip: Titanium
Sheath: -
Packaging: -
Notes: Hardened by Paul Bos, with logo on the right heel of the blade

Destinazione d'uso: Tattico

Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: CPM-3V Tool Steel
Trattamento Lama: Nitrurazione al titanio
Manicatura: G-10 con lavorazione 3D in colore Green + una coppia di guancette intercambiabili in G-10 in colore Black
Lunghezza lama: 80mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 184mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 227g.
Chiusura: -
Clip: -
Fodero: in Kydex, dotato di sistema opzionale e multiposizione PUP (Pals Universal Platform)
Confezione: Busta Trasparente
Note: Edizione Esclusiva e Limitata, non presente nei normali listini e cataloghi Strider, con loghi Monkey Edge incisi

Intended Use: Tactical

Type of production: Semi-Craft
Production Lama USA
Blade: Stainless steel CPM-S30V
Treatment Blade: Tiger Stripe
Handle: with G10 scales with titanium liners 2mm
Blade length: 103mm.
Blade thickness: 5mm.
Length closed: 137mm.
Total length: 240mm.
Thick when closed: 18mm.
Balance: -
Weight: 244g.
Lock: Liner Lock
Clip: Titanium
Sheath: -
Packaging: -
Notes: Hardened by Paul Bos, with logo on the right heel of the blade

WARNING: technical data of the knife are approximate and vary from knife to knife these are handmade products.

Intended Use: collection / sports

Production Type: Handmade
Production Blade: Cambodia
Blade: carbon steel DNH7
Treatment Lama: -
Handle: stingray leather
Blade length: about 50mm.
Blade thickness: approx 4mm.
Closed Length: about 82mm.
Total length: about 145m.
Thick when closed: about 15mm.
Balance: -
Weight: about 78g.
Lock: Liner lock
Clip: -
Sheath: sheath
package:
Notes: -

These handmade knives are distinguished by their original line, but functional, well that is coupled alletradizionali manufacturing techniques and materials used.
The blades are in fact hardened coal until Adavere a hardness of about 40 HRC after which, after having been hand-hammered, back and sides are covered with clay and the wire refreshed to 60 HRC to have excellent cutting capacity, flexibility and penetration. The knife is then polished and sharpened by hand on stone and finished in every detail.

Blade: Stainless DNH7
manicatura: wood
Blade length: 130 mm.
Handle Length: 70 mm.
Blade Thickness: 4.5 mm.
Total length: 270 mm.
Sheath: Leather brown handmade
Weight: 106 g.

Note: Being craft knives, and finishes for slightly differing from each other, the knife itself may not be identical to that represented in the images.

These handmade knives are distinguished by their original line, but functional, well that is coupled alletradizionali manufacturing techniques and materials used.
The blades are in fact hardened coal until Adavere a hardness of about 40 HRC after which, after having been hand-hammered, back and sides are covered with clay and the wire refreshed to 60 HRC to have excellent cutting capacity, flexibility and penetration. Each knife is then polished and sharp hand-polished and finished in every detail.

Blade: Stainless DNH7
manicatura: Micarta
Blade length: 60 mm.
Handle Length: 70 mm.
Blade thickness: 4 mm.
Total length: 164 mm.
Sheath: Leather brown handmade with horizontal mounting of the knife
Weight: 122 g.

Note: Being craft knives, and finishes for slightly differing from each other, the knife itself may not be identical to that represented in the images.

WARNING: technical data of the knife are approximate and vary from knife to knife these are handmade products.

Intended Use: collection / sports

Production Type: Handmade
Production Blade: Cambodia
Blade: carbon steel DNH7
Treatment Lama: -
Handle: wood plane
Blade length: about 80mm.
Blade thickness: approx 4mm.
Closed Length: about 120mm.
Total length: about 210mm.
Thick when closed: about 20mm.
Balance: -
Weight: about 166g.
Lock: Liner lock
Clip: -
Sheath: -
Packaging: bag Cordura
Notes: -

WARNING: technical data of the knife are approximate and vary from knife to knife these are handmade products.

Intended Use: collection / sports

Production Type: Handmade
Production Blade: Cambodia
Blade: carbon steel DNH7
Treatment Lama: -
Handle material: wood
Blade length: about 65mm.
Blade thickness: about 2mm.
Closed Length: about 154mm.
Total length: about 185mm.
Thick when closed: about 13mm.
Balance: -
Weight: about 68g.
Closing: -
Clip: -
Sheath: -
Packaging: bag Cordura
Notes: -

WARNING: technical data of the knife are approximate and vary from knife to knife these are handmade products.

Intended Use: collection / sports

Production Type: Handmade
Production Blade: Cambodia
Blade: carbon steel DNH7
Treatment Lama: -
Handle material: wood
Blade length: about 65mm.
Blade thickness: about 2mm.
Closed Length: about 154mm.
Total length: about 185mm.
Thick when closed: about 13mm.
Balance: -
Weight: about 68g.
Closing: -
Clip: -
Sheath: -
Packaging: bag Cordura
Notes: -

These craftsmanships are distinguished by their classical lineage and their functional quality, which blends well with traditional production techniques and materials used. The blades are hardened to a hardness of about 40 HRC, after which they have been hammered by hand, the back and sides are clad with clay and the thread is retreaded to 60 HRC for excellent cutting, penetration and flexibility . The blade is then polished and sharpened by hand on stone and the knife is finished in every single detail.

Blade: high-carbon DNH7 steel with selective clay 40 / 60HRC clay and high degree of mirror polishing.
Hamon: Gunome style
Bo-Hi: absent
Total Length: 23.3cm.
Blade length: 11.8cm.
Blade thickness: 3.5mm.
Balance: on guard
Length Grip: 8.5cm.
Weight: 136g.
Saya: black lacquered wood with buffalo horn finishes
Tsuka-ito: Black cotton on the same (white skin) white
Sageo: absent
Fuchi and Kashira: in buffalo horn
Menuki: bronze
Habakia: Copper
Notes: Sold with silk sheath and cordura carrying case.

Intended use: collectible/sporting

Type of production: Handcrafted
Blade Production: Cambodia
Blade: DNH7 carbon steel selective hardening 40/60HRC
Blade Finish: mirror polished
Handle: water buffalo horn
Blade length: about 80mm.
Blade thickness: about 3mm.
Length closed: about 113m.
Total length: about 190mm.
Thickness when closed: about 17mm.
Balance: -
Weight: about 58g.
Closure: -
Clip: -
Sheath: leather pouch
Packaging: -
Notes: each knife is handmade and differs minimally in size, weights and aesthetics

Type of production: Artisan
Country of production: Cambodia
Steel: carbon DNH7, hand forged, with hardened clay tempered at 60 / 40HRC
Habaki: copper
Tsuka: samekawa (ray skin)
Saya: Lacquered wood and water buffalo horn
Blade length: 122mm. (including habaki)
Total length: 222mm.
Weight: 110g. without saya

Note: Since these are handmade items and differ slightly in finishes from one another, the knife you ordered may not be identical to the one shown in the images.

Intended Use: Tactical

Type of production: Semi-Craft
Production Lama USA
Blade: Stainless steel CPM-S30V
Treatment Blade: Tiger Stripe
Handle material: G10 and titanium
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed: 115mm.
Total length: 203mm.
Thick when closed: 12mm.
Balance: -
Weight: 138g.
Closure: Frame Lock
Clip: Titanium
Sheath: -
Packaging: -
Notes: -

Destinazione d'uso: Tattico / Collezione

Tipo di produzione: Semi-Artigianali
Produzione Lama: USA
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Tiger Stripe
Manicatura: G-10 e Titanio
Lunghezza lama: 100mm.
Spessore lama: 5mm.
Lunghezza totale: 228mm.
Peso: 172g.
Chiusura: Frame Lock in titanio
Clip: in titanio
Fodero: -
Confezione: -
Note: -

These artisanal products stand out for their classic line and their functional quality, which is well matched to the traditional manufacturing techniques and the materials used.
The blades are in fact carbon-hardened to a hardness of around 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire is tempered at 60 HRC to have excellent cutting, penetration and flexibility . The blade is then polished and sharpened by hand on stone and the knife is finished in every single detail.

Blade: in DHN7 steel with high carbon content with selective clay / 40 / 60HRC tempering and high degree of polishing.
Hamon: Gunome style
Bo-Hi: absent
Total length: 38.5cm.
Blade length: 23.3cm.
Blade thickness: 6.5mm. / 3mm.
Balancing: Advanced 2.5cm from Tsuba
Handle Length: 9.5cm.
Tanto weight: 372g.
Weight with Saya: 488g.
Saya: black lacquered wood, drowned gold leaves and buffalo horn finishes
Tsuka-ito: beige cotton on the same white (breed leather)
Sageo: absent
Tsuba, Fuchi and Kashira: in burnished and finely engraved metal
Menuki, seppa, shitodome: bronze
Habaki: copper
Notes: The Tanto is sold with a silk sheath and carrying case cordura.

Small technical glossary: ​​Hamon: hardening line on the blade * Hi: deep groove in the blade, also called bloodsucker * Saya: sword sheath * Tsuka-Ito or Tsuka-gawa: cotton, silk or leather braid wrapping the handle * Tsuba: guard * Drones: ornament between guard and handle * Kashira: ornament at the end of the handle * Menuki: medallions placed under the cordage of the handle * Habaki: collar that wraps the beginning of the blade * Seppa: seals of the guard * Shitodome: seals to which is tied the Sageo * Sori: curvature of the blade