Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Consigli Scarperia - Maremmano Amaranth wood - Kilama Serie MFMA18 - knife
The series Kilama by Consigli is a modern interpretation of Italian regional knives.
The materials and finishes remain the same as always but the line has the form "new"
Total length: 185
Blade length: 80
Blade thickness: 2.5
Weight. 55g
Steel: 420
Hanfle: amaranth wood
Sheath: -
Package: box with cleaning kit50154 -
Consigli Scarperia - Maremma in Olivo - Series Kilama MFO18 - knife
Maremma in Olivo - Series Kilama MFO18 - knife
The series Kilama Councils is a modern interpretation of Italian regional knives.
The materials and finishes remain the same as always but the line has the form "new"
that reflect the traditional and regional Italian classics knives.
Total length: 185
Blade length: 80
blade thickness: 2.5
weight. 55g
Steel: 420
manicatura: amaranth wood
Sheath: fabric
Package: Box Advice with cleaning kit knife50157 -
Conaz Consigli Scarperia - Hunchback knife in Olive - Kilama 50153 Series - knife
The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.
Type of production: artisanLama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: olive wood
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 185mm.
Weight: 50g.
Closing: retention spring
Packaging: Tips box with knife cleaning kit
Sheath: fabric caseGAO18 -
Conaz Consigli Scarperia - Senese knife in amaranth - Kilama series SEAM18 - knife
The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: amaranth wood
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 90mm.
Total length: 185mm.
Weight: 55g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
SEAM18 -
Sergio Consoli - Folder Damascus Spirograph - Timascus and bronze Handle - N ° 454 - handcrafted knives
Intended use: Collection
Type of production: Artisan by CIC Master Sergio Consoli
Production Lama: Italy
Blade: In spirograph damascus steel
Blade treatment: -
Handle: bronze bolsters, timascus with titanium spacers
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 225mm.
Weight: 243g.
Closure: Liner Lock
Clip: titanium
Notes: Handmade by Master Sergio Consoli - knife number 454 made in 2018Acknowledgments
Currently I make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:
in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded as "best table on display"
always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"
I was also ranked second in the competition organized by the magazine LAME D'AUTORE as the best fixed hunting blade
then in 2007 at "Scarperia" I won the third prize for best folding
but above all again in 2007, to my great satisfaction, I reached the degree of MASTER OF THE ITALIAN KNIVING CORPORATION, a recognition received at the first exam.
Presentation of the craftsman
Creating a knife by hand is what I consider a real art form.
The satisfaction of seeing an object that comes from one's own hands, that takes shape and reaches mechanical, artistic and aesthetic perfection is what pays me back the most for all the hours of work and effort it takes to create a knife completely. by hand.The passion for "cutting tools" has always been in me since I was a child and grew with me until the almost sudden decision to build my first knife myself, it was a "need", almost an inner necessity that I couldn't put off, my hands and my mind had to start creating, of course, what I had always been passionate about ... the knife!
I started at 40, in 2003, practically self-taught, I had no experience of manual work, but I had been a mechanical designer for many years and this allowed me to perfectly know the technique and all the various stages of mechanical processing.
Currently I am a member, with the rank of Master, which is the highest, of the Italian Knives Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.
What I do now is what I consider my art form ..., to create "handcrafted, hunting and collectible knives".
They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
I mainly make folding knives, which satisfy my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they are not seen, is what distinguishes a knife created by hand, from one made industrially .The mechanics then must be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.
Of course, over the years I have refined my technique and currently I have improved the mechanics even more by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction. and with an incredible sweetness.
With regard to the blades then, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow an exceptional edge hold and cutting quality for all types of use.
I make practically all the knives on an initial design of mine, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "artisanal".
Regarding the materials I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damascus, both stainless steel and carbon, for the uniqueness 'that give the knife, since each damask is always different from another.
For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of wonderful colors, I also use fossil mammoth ivory, various briars, titanium and carbon fiber.
Most of the knives, however, are made entirely of steel, in order to then be engraved, always and strictly by hand, to transform the knife even more into a real work of art ...
SC-454€0.00Only -50 leftOut of stock -
Conaz Consigli Scarperia - Palmerino horn cattle PA2C20 two blades - knife
Palmerino horn cattle PA2C20 two knives - knife
The production of Scarborough has not devoted much attention to penknives.
It was, however, made a template from the desk, which in the past was used to make the tip of the quill pens and pencils.
This sharpener Scarperia was always devoid of spring and could have from one to two blades; unmistakable the shape of the handle, in a single piece of horn.
In the catalogs of the early years of the twentieth century these items were listed as "sharpeners use Palmerini" which was actually the name of a renowned manufacturer of the nineteenth century.
Proposed model is at the tip of the horn two blades.Stainless steel blade 440.
Blade length 4.6 cm.
Blade thickness 2.5 mm.
Overall length 15 cm.
Weight 40 gr.PA2C20 -
Strider Knives - AR Tiger Stripe Coyote Tan - knife
Intended Use: Tactical
Type of production: Semi-Craft
Production Lama USA
Blade: Stainless steel CPM-S30V
Treatment Blade: Tiger Stripe
Handle: with G10 scales with titanium liners 2mm
Blade length: 103mm.
Blade thickness: 5mm.
Length closed: 137mm.
Total length: 240mm.
Thick when closed: 18mm.
Balance: -
Weight: 244g.
Lock: Liner Lock
Clip: Titanium
Sheath: -
Packaging: -
Notes: Hardened by Paul Bos, with logo on the right heel of the blade10139 -
Sergio Consoli - N°098 Folding Walnut - Custom Knife
Blade: 61HRC RWL34 Stainless Steel
Handle: Walnut, Damascus and Titanium
Blade Lenght: 75mm.
Blade Thickness: 4mm.
Overall Lenght: 180mm.
Weight: 110g.
Lock: Liner lock
Clip: -
Sheath: -
Notes: Handmade in Italy by CIC Master Sergio Consoli9015€729.51Out of stock -
Strider Knives - MK-1 Mod.10 OAL Tiger Stripe Black G10 - coltello
Destinazione d'uso: Tattico
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Tiger Stripe
Manicatura: G-10
Lunghezza lama: 140mm.
Spessore lama: 6.3mm.
Lunghezza chiuso: -
Lunghezza totale: 265mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 330g.
Chiusura: -
Clip: -
Fodero: in Cordura
Confezione: -
Note: -7826 -
Strider Knives - MT Mod.10 Chuck Mawhinney Sniper Green Paracord - coltello
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli tattici made in USA Strider Knives
Destinazione d'uso: tattico/militare
Tipo di produzione: Semi-Artigianale
Lama: full tang in acciaio inox CPM-S30V
Produzione Lama USA
Manicatura: Paracord
Lunghezza lama: 138mm.
Spessore della lama: 6,3mm.
Lunghezza totale: 258mm.
Bilanciatura: sul ramo di guardia
Peso: 282g.
Fodero: tattico in Cordura
Note: modello dedicato a Charles Benjamin "Chuck" Mawhinney, famoso sniper dei Marines ai tempi della guerra in Vietnam.7801 -
Strider Knives - MT Tactical Fixed Blade Black G10 - coltello
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli tattici made in USA Strider Knives
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Tiger Stripe
Manicatura: G-10
Lunghezza lama: 157mm.
Spessore lama: 6.3mm.
Lunghezza totale: 296mm.
Peso: 364g.
Fodero: Nero, in Cordura
Confezione: -
Note: -7809 -
Strider Knives - MT Tactical Fixed Blade Green G10 - coltello
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli tattici made in USA Strider Knives
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Tiger Stripe
Manicatura: G-10
Lunghezza lama: 157mm.
Spessore lama: 6.3mm.
Lunghezza totale: 296mm.
Peso: 364g.
Fodero: Verde, in Cordura
Confezione: -
Note: -7809G -
Strider Knives - MT Tactical Fixed Serrated Blade Green G10 - coltello
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli tattici made in USA Strider Knives
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Tiger Stripe
Manicatura: G-10
Lunghezza lama: 157mm.
Spessore lama: 6.3mm.
Lunghezza totale: 296mm.
Peso: 364g.
Fodero: Verde, in Cordura
Confezione: -
Note: -7809SG -
Strider Knives - PS Small Karambit
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli tattici made in USA Strider Knives
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Tiger Stripe
Manicatura: G-10
Lunghezza lama: 93mm.
Spessore lama: 4.7mm.
Lunghezza totale: 178mm.
Peso: 152g.
Fodero: in Kydex
Confezione: -
Note: -7810 -
Strider Knives - SMF CC S Tiger Stripe - coltello
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli tattici made in USA Strider Knives
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Semi-Artigianali
Produzione Lama: USA
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Stone Washed
Manicatura: G-10 e Titanio
Lunghezza lama: 100mm.
Spessore lama: 5mm.
Lunghezza totale: 228mm.
Peso: 154g.
Chiusura: Frame Lock in titanio
Clip: in titanio
Fodero: -
Confezione: -
Note: -7821T -
Strider Knives - SMF S Special Mission Black G10 - coltello
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli tattici made in USA Strider Knives
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Semi-Artigianali
Produzione Lama: USA
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Tiger Stripe
Manicatura: G-10 e Titanio
Lunghezza lama: 100mm.
Spessore lama: 5mm.
Lunghezza totale: 228mm.
Peso: 172g.
Chiusura: Frame Lock in titanio
Clip: in titanio
Fodero: -
Confezione: -
Note: -7820 -
Strider Knives - SMF S Special Mission Green G10 - coltello
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Semi-Artigianali
Produzione Lama: USA
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Tiger Stripe
Manicatura: G-10 e Titanio
Lunghezza lama: 100mm.
Spessore lama: 5mm.
Lunghezza totale: 228mm.
Peso: 172g.
Chiusura: Frame Lock in titanio
Clip: in titanio
Fodero: -
Confezione: -
Note: -7820G