Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Higonokami - Kanekoma knife - Black Small Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural tools, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 92mm.
Blade length: 76mm.
Blade thickness: 2.7mm
Open length: 155mm
Weight: 33g.
Note:HIGO-06BL€21.31Only 11 left -
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 75mm.
Blade thickness: 3mm
Overall length: 172mm
Weight: 42g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO07SL€23.77Only 4 left -
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 65mm.
Blade thickness: 3mm
Overall length: 153mm
Weight: 46g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO-06SL€21.31Only 12 left -
Higonokami - Sadakoma Higo in black leather - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratoryFascinating knife used by the Japanese farmer "Higonokami kanekoma."
As is typical for many agricultural tools, this Japanese knife turns out to be extremely simple but the result of centuries of refinement that has found the difficult balance between form and function, and between cost and benefit.
The main feature definitely turns out to be the quality of the blade, in fact it uses a three-layer San Mai steel of which the one in the center is extremely hard.
Production: Japanese craftsmanship
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc
Handle: brass foil with elegant black leather cover
Closure: without blade lock
Length closed: 120mm.
Blade length: 90mm.
Blade thickness: 3mm
Length open: 210mm
Weight: 72g.
Notes: lubricate the blade well otherwise easily subject to oxidation.
Packaging: elegant and fine wooden box with Japanese ideograms.018208-CP€0.00Only -20 leftOut of stock -
Takefu Village - Tanto Kiridashi knife - by Mr. Masanobu Okada - 6 cm - Japanese craftsmanship
Takefu Knives Village is a brand born in 1991 in Echizen Fukui, a city in Japan famous since 1400 for the production of knives.
The Takefu knives brand is based on the union of 10 local artisans who forge each knife by hand
Characteristics of the knife: Mr. Masanobu Okada
Use: collection / sports
Blade: three-layer clad steel with a 62 / 63HRC Shirogami cutting edge
Lama origin: Japan
Handle: black paracord
Packaging: -
Blade length: 60mm
Total length: 165mm
Blade thickness: 4mm
Production: artisanal
Weight: 79gSheath: in kydex handcrafted by Simone Tonolli
OKD-10B-S-BL -
Takefu Village - Drop Point Kiridashi knife - by Mr. Masanobu Okada - 7.5 cm - Japanese craftsmanship
Takefu Knives Village is a brand born in 1991 in Echizen Fukui, a city in Japan famous since 1400 for the production of knives.
The Takefu knives brand is based on the union of 10 local artisans who forge each knife by hand
Characteristics of the knife: Mr. Masanobu Okada
Use: collection / sports
Blade: three-layer clad steel with a 62 / 63HRC Shirogami cutting edge
Lama origin: Japan
Handle: black paracord
Packaging: -
Blade length: 75mm
Total length: 190mm
Blade thickness: 4mm
Production: artisanal
Weight: 114gSheath: in kydex handcrafted by Simone Tonolli
OKD-20A-BL -
Takefu Village - Spear Point Kiridashi knife - by Mr. Masanobu Okada - 6 cm - Japanese craftsmanship
Takefu Knives Village is a brand born in 1991 in Echizen Fukui, a city in Japan famous since 1400 for the production of knives.
The Takefu knives brand is based on the union of 10 local artisans who forge each knife by hand
Characteristics of the knife: Mr. Masanobu Okada
Use: collection / sports
Blade: three-layer clad steel with a 62 / 63HRC Shirogami cutting edge
Lama origin: Japan
Handle: black paracord
Packaging: -
Blade length: 60mm
Total length: 167mm
Blade thickness: 4mm
Production: artisanal
Weight: 78gSheath: in kydex handcrafted by Simone Tonolli
OKD-10D-BL -
Takefu Village - Skinner Kiridashi knife - by Mr. Masanobu Okada - 6.5 cm - Japanese craftsmanship
Takefu Knives Village is a brand born in 1991 in Echizen Fukui, a city in Japan famous since 1400 for the production of knives.
The Takefu knives brand is based on the union of 10 local artisans who forge each knife by hand
Characteristics of the knife: Mr. Masanobu Okada
Use: collection / sports
Blade: three-layer clad steel with a 62 / 63HRC Shirogami cutting edge
Lama origin: Japan
Handle: black paracord
Packaging: -
Blade length: 65mm
Total length: 165mm
Blade thickness: 4mm
Production: artisanal
Weight: 83gSheath: in kydex handcrafted by Simone Tonolli
OKD-10C-BL -
Takefu Village - Kama - Hand Forged Damascus Steel Sickle - Sickle
Beautiful traditional Japanese sickle handcrafted in laminated steel from Takefu Knives Village. Brand born in 1991 in Echizen Fukui, a city in Japan famous since 1400 for the production of knives.
Kama Features:
Use: collection / gardening
Blade: CladSteel carbon steel with 62 / 64HRC White Paper Steel (Shirogami) cutting edge and 33-layer "Suminagashi" damask
Lama origin: Japanese craftsmanship
Handle: Wood
Packaging: -
Blade length: 195mm
Total length: 430mm
Blade thickness: 3.7mm
Handle length: 360mm
Weight: 264gThe kama is a traditional agricultural tool typical of Japan and Okinawa, similar to a small sickle used to harvest wheat, and also used as a weapon. Before being used in martial arts, kama was used extensively in Asia to cut crops, especially rice.
OK-SKD -
Higonokami - Kanekoma knife - Black Medium Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural implements, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 11mm.
Blade length: 72mm.
Blade thickness: 2.7mm
Open length: 170mm
Weight: 42g.
Note:HIGO-07BL€23.77Only 0 leftOut of stock -
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Charming knife used by the Japanese farmer " Higonokami kanekoma ."
As is typical for many agricultural tools , this Japanese knife is extremely simple but the result of a secular improvement that has found it difficult balance between form and function, and between cost and benefit.
The main feature is definitely the quality of the blade, in fact, uses a steel San Mai to three layers of which the one at the center rough .
It has a razor wire , as is appropriate for a tool to cut and not just born to be displayed in glass cases .
production: Japanese crafts
Blade : carbon steel, San Mai
Handle: black brass plate with elegant brown leather cover
Closure: Without lock blade
Closed Length : 120mm .
Blade length : 90mm .
Blade thickness : 3mm
Length open : 210mm
Weight: 72g .
Notes: lubricate the blade otherwise easily subject to oxidation .
Packing: elegant and fine wooden box with Japanese characters018209€0.00Only -20 leftOut of stock -
Beltrame - Tinea Kombat knife - coltello
***************************************
FUORI PRODUZIONE
NOTA INFORMATIVA: questo prodotto è presente nel nostro database unicamente a scopo storico ed informativo, non ci risulta più in produzione e pertanto non è acquistabile. Per aggiornamenti: [email protected]
***************************************
Questo kombat è stato disegnato da Ivano Beltrame e realizzato insieme al maestro Danilo Rossi, fondatore della Calix Academy Europe Club, accademia il cui scopo è la divulgazione delle tradizioni italiane nel maneggio di armi bianche e bastoni.
Dalla Paranza siciliana, alla Puntatina, al sistema Zaccagno, alla Pizzica pugliese, alla Beidana valdese, al Falcet piemontese alla Britula friulana.
Dettaglio delle scelte tecniche:
l’impugnatura con l’elsa a proteggere la mano serve a far scivolare durante il combattimento la lama all’avversario, e ci siamo ispirati sempre per restare in ambito tradizionale alla coccia del fioretto italiano.
Il foro sulla lama serve a bloccare la lama dell’avversario e a disarmarlo non con una azione di forza ma di destrezza.Lo skull krash minimalista non serve tanto a rompere quanto a strisciare sull’avversario per disarmarlo o per far leva sui tendini sempre per una azione di disarmo.
Il nome Tinea si ispira al un famoso combattente italiano Ottaviano detto er più de Roma reso celebre dal film di Adriano Celentano “ Storie di donne e di coltelli”.La scelta dei materiali il pratico acciaio N690 e lo spessore 6mm ne garantiscono la robustezza in ogni situazione; è stato testato in prove estreme di foratura e taglio senza perdere efficienza.
Il manico in G10 oltre a garantire un ottimo grip e anche efficace conduttore in caso di scossa elettrica.
Al momento è disponibile con copertura teflon in grado di evitare sia in diurna che in notturna quelle situazioni di rifrangenza durante l'utilizzo.
Il fodero è stato studiato sia per attacco in cintura ma soprattutto da posizionare con un pettorale proprio in copertura ¾ del cuore con uno sgancio rapido per situazioni critiche, difficilmente i foderi posti in altre zone garantiscono una immediatezza di copertura in caso di attacco.
Destinazione d'uso: Militare/Tattico/Collezione
Tipo di produzione: industriale
Lama: 58-59HRC N690
Trattamento Lama: teflonata
Produzione Lama: Italia
Manicatura: G10
Lunghezza lama: 160mm.
Spessore della lama: 6mm.
Lunghezza totale: 295mm.
Bilanciatura: sul ramo di guardia
Peso: 370g.
fodero: in cordura con attacco ascellare
Note: Design by Danilo Rossi7224€204.09Out of stock -
BlackHawk ! Blades - Crucible II Folding Plain - 15C201BK knife
BlackHawk ! Blades - Crucible II Folding Plain - 15C201BK knife
The brand BlackHawk ! Blades was born after the recent acquisition of MOD / Master of Defense by BlackHawk ! - American company leader in tactical gear. The new products keep high quality standards to which MOD we had become accustomed and speak directly to the police and martial artists in fighting techniques with a knife.
Intended Use: Tactical
Type of production : industrial
Blade: AUS-8 stainless steel
Treatment Blade: Teflon
Production Blade: Taiwan
Handle material: 1.5mm stainless steel liners , Cheeks G-10
Blade length : 90mm .
Blade Thickness: 3mm.
Length closed: 119mm .
Total length : 200mm .
Balance: -
Weight: 184g .
Lock: Liner Lock
Clip: Removable , multi-position stainless steel TiNi
Sheath: -
Notes: knife designed by Kelly McCann (aka Jim Grover ), founder of Crucible Security , one of the most important agencies of security services4403 -
BlackHawk! Blades - CQD Mark I Type E - 15M101BK coltello
Destinazione d'uso: Tattico / Rescue
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: In acciaio inox AUS-8
Trattamento Lama: Nitrurazione al Titanio
Manicatura: Acciaio Inox e Zytel
Lunghezza lama: 94mm.
Spessore lama: 3.5mm.
Lunghezza chiuso: 150mm.
Lunghezza totale: 242mm.
Spessore da chiuso: 17mm.
Bilanciatura: -
Peso: 166g.
Chiusura: Button Lock
Clip: in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi BlackHawk! Blades
Note: Tagliacinture e Frangicristalli/Skullcrasher integrati4402 -
BlackHawk! Blades - CQD Mark II Type E - BB15M201BK coltello
Destinazione d'uso: Tattico/CQD
disponibile con lama parzialmente seghettata
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: Acciaio Inox AUS-8A
Trattamento Lama: Nitrurazione al Titanio
Manicatura: Zytel con liners in acciaio inox
Lunghezza lama: 85mm.
Spessore lama: 3.5mm.
Lunghezza chiuso 120mm.
Lunghezza totale: 200mm.
Spessore da chiuso: 15mm.
Bilanciatura: -
Peso: 132g.
Chiusura: Button Lock con sicura opzionale
Clip: Acciaio Inox
Fodero: -
Confezione: Scatola di cartone con loghi BlackHawk! Blades
Note: -
Skull Crasher / Frangivetro nella parte finale dell'impugnatura4407 -
BlackHawk! Blades - Crucible FX II Plain Fixed - 15C200BK
Il marchio BlackHawk! Blades nasce dopo la recente acquisizione della M.O.D./Master of Defense da parte di BlackHawk! - azienda americana leader nel tactical gear. I nuovi prodotti mantengono l'altissimo standard qualitativo a cui M.O.D. ci aveva abituati e si rivolgono direttamente alle forze dell'ordine e ai marzialisti in tecniche di combattimento con il coltello.
Destinazione d'uso: Fighter / CQC
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: In acciaio inox AUS-8 58HRC
Trattamento Lama: Teflonatura
Manicatura: Zytel
Lunghezza lama: 90mm.
Spessore lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 200mm.
Spessore da chiuso: -
Bilanciatura: arretrata a 2.5cm
Peso: 172g.
Chiusura: -
Clip: -
Fodero: in ABS, multiposizione
Confezione: scatola in cartone con loghi BlackHawk! Blades
Note: -4405 -
BlackHawk! Blades - Garra II - BB10023
Destinazione d'uso: Tattico/CQD
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: Acciaio Inox AUS-8A
Trattamento Lama: Teflonatura
Manicatura: G-10 con liners in acciaio inox
Lunghezza lama: 80mm.
Spessore lama: 3.5mm.
Lunghezza chiuso 115mm.
Lunghezza totale: 185mm.
Spessore da chiuso: 14mm.
Bilanciatura: -
Peso: 128g.
Chiusura: Liner Lock
Clip: Acciaio Inox
Fodero: -
Confezione: Guscio Plastico con loghi BlackHawk! Blades
Note: -4406 -
BlackHawk! Blades - HawkHook Serrated Silver - 15HH11SL
Destinazione d'uso: Emergenza / Rescue
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: In acciaio inox AUS-8 58HRC
Trattamento Lama: -
Manicatura: Zytel
Lunghezza lama: 57mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 88mm.
Lunghezza totale: 140mm.
Spessore da chiuso: 15mm.
Bilanciatura: -
Peso: 72g.
Chiusura: Frame Lock
Clip: in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi BlackHawk! Blades
Note: -4299 -
BlackHawk! Blades - Hornet II Plain Black - 15H201BK
Destinazione d'uso: Tattico
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: In acciaio inox AUS-8 58HRC
Trattamento Lama: Teflonatura
Manicatura: G-10
Lunghezza lama: 78mm.
Spessore lama: 3.5mm.
Lunghezza chiuso: 103mm.
Lunghezza totale: 180mm.
Spessore da chiuso: 18mm.
Bilanciatura: -
Peso: 114g.
Chiusura: Liner Lock
Clip: in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi BlackHawk!
Note: -4404 -
Blackhawk! Blades - Kalista II - 15K200BK coltello
Il marchio BlackHawk! Blades nasce dopo la recente acquisizione della M.O.D./Master of Defense da parte di BlackHawk! - azienda americana leader nel tactical gear. I nuovi prodotti mantengono l'altissimo standard qualitativo a cui M.O.D. ci aveva abituati e si rivolgono direttamente alle forze dell'ordine e ai marzialisti in tecniche di combattimento con il coltello.
Destinazione d'uso: Militare
Tipo di produzione: industriale
Lama: full tang in acciaio inox AUS-8
Trattamento Lama: Teflonatura
Produzione Lama: Taiwan
Manicatura: G-10
Lunghezza lama: 65mm.
Spessore della lama: 3mm.
Lunghezza chiuso: -
Lunghezza totale: 185mm.
Bilanciatura: arretrata di 4cm.
Peso: 100g.
Chiusura: -
Clip: -
Fodero: Total Concealed Carry Solution™ (TCCS™) termoplastico che consente fino a 70 differenti posizioni di aggancio
Note: Disegnato espressamente per chi pratica Kali filippino4238 -
BlackHawk! Blades - Point Man Plain Black - 15PM01BK coltello
Destinazione d'uso: Tattico
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: In acciaio inox AUS-8 58HRC
Trattamento Lama: Teflonatura
Manicatura: G-10
Lunghezza lama: 85mm.
Spessore lama: 3.5mm.
Lunghezza chiuso: 115mm.
Lunghezza totale: 200mm.
Spessore da chiuso: 20mm.
Bilanciatura: -
Peso: 140g.
Chiusura: Liner Lock
Clip: Acciaio Inox
Fodero: -
Confezione: scatola in cartone con loghi BlackHawk! Blades
Note: -4401 -
BlackHawk! Blades - Trocar Plain Edge - 15RT00BK coltello
Destinazione d'uso: Tattico / CQC
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: In acciaio inox AUS-8 58HRC
Trattamento Lama: Teflonatura
Manicatura: Zytel
Lunghezza lama: 97mm.
Spessore lama: 4.5mm.
Lunghezza chiuso: -
Lunghezza totale: 210mm.
Spessore da chiuso: -
Bilanciatura: arretrata di 1cm
Peso: 84g.
Chiusura: -
Clip: -
Fodero: ABS Multiposizione
Confezione: scatola in cartone con loghi BlackHawk! Blades
Note: -4293T