Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Higonokami - Kanekoma knife - Black Small Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural tools, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 92mm.
Blade length: 76mm.
Blade thickness: 2.7mm
Open length: 155mm
Weight: 33g.
Note:HIGO-06BL€21.31Only 11 left -
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 75mm.
Blade thickness: 3mm
Overall length: 172mm
Weight: 42g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO07SL€23.77Only 4 left -
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 65mm.
Blade thickness: 3mm
Overall length: 153mm
Weight: 46g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO-06SL€21.31Only 12 left -
Piscitelli - Ciociaro horn tip hammered blade - CIO01/2 - handmade knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
- Type: Previously Purchased
- Condition: like new
- Available in commerce: NO - the craftsman stopped producing knives a few years ago
- Sharpening: Original
- Marks on blade: NO
- Marks on handle: NO
- Packaging: YES
- Checked and Certified by our internal laboratory
It has a slender blade and a curved handle. It originates from very ancient models. It was a very common knife among the shepherds of southern central Italy. The handle is made of full horn.
Features:
- steel: AISI 420
- hardness: 54/56 HRC
- total length: 20.5cm
- blade length: 9cm
- blade thickness: 2mm
- weight: 60gr
- fittings: horn tip
- notes: handcrafted - accompanied by a warranty certificate
Piscitelli has been making knives in Frosolone for three generations, a small town in the Molise hinterland known for its knife-making. The Art, Style, and Tradition allow us to give importance and originality to our creations handed down from generation to generation.
Giovanni Piscitelli, born in Frosolone (IS). The passion for collection and hunting knives I inherited from my father (master craftsman) from whom I also inherited the most sophisticated techniques. My knives are unique pieces, strictly handcrafted.
When producing a knife, there are many elements that make a difference. In addition to a difference in value in the choice of materials, it is the labor required to perform certain operations, closely connected to the construction complexity that makes the knife more valuable. The reasons that justify the differences can also lie in the processing of the blade, or of the handle (elements that it is good to remember are modeled and finished exclusively by hand).
CIO01/2€131.15Only 1 left -
Piscitelli - Hunting horn hammered blade - CCC03/2 - artisanal knife
Piscitelli - Hunt horn hammered blade - CCC03/2 - handmade knife KNIFE WITHDRAWN FROM PRIVATE COLLECTION
- Type: Previously Purchased
- Condition: like new
- Available in commerce: NO the craftsman stopped producing knives a few years ago
- Sharpening: Original
- Marks on blade: NO
- Marks on handle: NO
- Packaging: YES
- Checked and Certified by our internal laboratory
Typical knife for the hunter. It is a robust and concrete knife. The tip is slightly lowered to work in cavities, and the blade has a deep curve for skinning.
Features:
- steel: AISI 420
- hardness: 54/56 HRC
- total length: 18cm
- blade length: 7.5cm
- blade thickness: 2mm
- weight: 68gr
- fittings: horn
- notes: handcrafted
- accompanied by a warranty certificate
Piscitelli has been making knives in Frosolone for three generations, a small town in the Molise hinterland known for its knife-making. The Art, Style and Tradition allow us to give importance and originality to our creations handed down from generation to generation.
Giovanni Piscitelli, born in Frosolone (IS). The passion for collection and hunting knives I inherited from my father (master craftsman) from whom I also inherited the most sophisticated techniques. My knives are unique pieces, strictly handcrafted.
When producing a knife, there are many elements that make a difference. In addition to a difference in value in the choice of materials, it is the labor required to perform certain operations, closely connected to the construction complexity that makes the knife more valuable. The reasons that justify the differences can also lie in the processing of the blade, or of the handle (elements that it is good to remember are modeled and finished exclusively by hand).
CCC03/2€118.85Only 1 left -
Higonokami - Sadakoma Higo in black leather - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratoryFascinating knife used by the Japanese farmer "Higonokami kanekoma."
As is typical for many agricultural tools, this Japanese knife turns out to be extremely simple but the result of centuries of refinement that has found the difficult balance between form and function, and between cost and benefit.
The main feature definitely turns out to be the quality of the blade, in fact it uses a three-layer San Mai steel of which the one in the center is extremely hard.
Production: Japanese craftsmanship
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc
Handle: brass foil with elegant black leather cover
Closure: without blade lock
Length closed: 120mm.
Blade length: 90mm.
Blade thickness: 3mm
Length open: 210mm
Weight: 72g.
Notes: lubricate the blade well otherwise easily subject to oxidation.
Packaging: elegant and fine wooden box with Japanese ideograms.018208-CP€0.00Only -20 leftOut of stock -
Takefu Village - Tanto Kiridashi knife - by Mr. Masanobu Okada - 6 cm - Japanese craftsmanship
Takefu Knives Village is a brand born in 1991 in Echizen Fukui, a city in Japan famous since 1400 for the production of knives.
The Takefu knives brand is based on the union of 10 local artisans who forge each knife by hand
Characteristics of the knife: Mr. Masanobu Okada
Use: collection / sports
Blade: three-layer clad steel with a 62 / 63HRC Shirogami cutting edge
Lama origin: Japan
Handle: black paracord
Packaging: -
Blade length: 60mm
Total length: 165mm
Blade thickness: 4mm
Production: artisanal
Weight: 79gSheath: in kydex handcrafted by Simone Tonolli
OKD-10B-S-BL -
Takefu Village - Drop Point Kiridashi knife - by Mr. Masanobu Okada - 7.5 cm - Japanese craftsmanship
Takefu Knives Village is a brand born in 1991 in Echizen Fukui, a city in Japan famous since 1400 for the production of knives.
The Takefu knives brand is based on the union of 10 local artisans who forge each knife by hand
Characteristics of the knife: Mr. Masanobu Okada
Use: collection / sports
Blade: three-layer clad steel with a 62 / 63HRC Shirogami cutting edge
Lama origin: Japan
Handle: black paracord
Packaging: -
Blade length: 75mm
Total length: 190mm
Blade thickness: 4mm
Production: artisanal
Weight: 114gSheath: in kydex handcrafted by Simone Tonolli
OKD-20A-BL -
Takefu Village - Spear Point Kiridashi knife - by Mr. Masanobu Okada - 6 cm - Japanese craftsmanship
Takefu Knives Village is a brand born in 1991 in Echizen Fukui, a city in Japan famous since 1400 for the production of knives.
The Takefu knives brand is based on the union of 10 local artisans who forge each knife by hand
Characteristics of the knife: Mr. Masanobu Okada
Use: collection / sports
Blade: three-layer clad steel with a 62 / 63HRC Shirogami cutting edge
Lama origin: Japan
Handle: black paracord
Packaging: -
Blade length: 60mm
Total length: 167mm
Blade thickness: 4mm
Production: artisanal
Weight: 78gSheath: in kydex handcrafted by Simone Tonolli
OKD-10D-BL -
Takefu Village - Skinner Kiridashi knife - by Mr. Masanobu Okada - 6.5 cm - Japanese craftsmanship
Takefu Knives Village is a brand born in 1991 in Echizen Fukui, a city in Japan famous since 1400 for the production of knives.
The Takefu knives brand is based on the union of 10 local artisans who forge each knife by hand
Characteristics of the knife: Mr. Masanobu Okada
Use: collection / sports
Blade: three-layer clad steel with a 62 / 63HRC Shirogami cutting edge
Lama origin: Japan
Handle: black paracord
Packaging: -
Blade length: 65mm
Total length: 165mm
Blade thickness: 4mm
Production: artisanal
Weight: 83gSheath: in kydex handcrafted by Simone Tonolli
OKD-10C-BL -
Takefu Village - Kama - Hand Forged Damascus Steel Sickle - Sickle
Beautiful traditional Japanese sickle handcrafted in laminated steel from Takefu Knives Village. Brand born in 1991 in Echizen Fukui, a city in Japan famous since 1400 for the production of knives.
Kama Features:
Use: collection / gardening
Blade: CladSteel carbon steel with 62 / 64HRC White Paper Steel (Shirogami) cutting edge and 33-layer "Suminagashi" damask
Lama origin: Japanese craftsmanship
Handle: Wood
Packaging: -
Blade length: 195mm
Total length: 430mm
Blade thickness: 3.7mm
Handle length: 360mm
Weight: 264gThe kama is a traditional agricultural tool typical of Japan and Okinawa, similar to a small sickle used to harvest wheat, and also used as a weapon. Before being used in martial arts, kama was used extensively in Asia to cut crops, especially rice.
OK-SKD -
Higonokami - Kanekoma knife - Black Medium Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural implements, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 11mm.
Blade length: 72mm.
Blade thickness: 2.7mm
Open length: 170mm
Weight: 42g.
Note:HIGO-07BL€23.77Only 0 leftOut of stock -
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Charming knife used by the Japanese farmer " Higonokami kanekoma ."
As is typical for many agricultural tools , this Japanese knife is extremely simple but the result of a secular improvement that has found it difficult balance between form and function, and between cost and benefit.
The main feature is definitely the quality of the blade, in fact, uses a steel San Mai to three layers of which the one at the center rough .
It has a razor wire , as is appropriate for a tool to cut and not just born to be displayed in glass cases .
production: Japanese crafts
Blade : carbon steel, San Mai
Handle: black brass plate with elegant brown leather cover
Closure: Without lock blade
Closed Length : 120mm .
Blade length : 90mm .
Blade thickness : 3mm
Length open : 210mm
Weight: 72g .
Notes: lubricate the blade otherwise easily subject to oxidation .
Packing: elegant and fine wooden box with Japanese characters018209€0.00Only -20 leftOut of stock -
Crusader Forge - Oberland 01 - Custom Knife
Intended use: Tactical / Military / Collection
Production Type: Handmade
Production Lama USA
Blade: Stainless Steel CPM-S30V
Treatment Blade: Black KG 2402 F
Handle: G-10 Hand Sculptured
Blade length: 145mm.
Blade thickness: 6.3mm.
Length closed: -
Overall length: 268mm.
Thick when closed: -
Balancing: -
Weight: 416g.
Closure: -
Clip: -
Sheath: Hand maded, Kydex with belt loop IWB
Packaging: Cardboard box with Crusader Forge logos
Notes: Modified version, which differs from the basic model normally for sale: slightly longer blade and handle, thumbstood double groove. Only one piece maded.10814