Sport, Military and Collectible Knives | Coltelleria Collini

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of its packaging.
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Tactical/Sporting

Production Type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 61/62HRC
Blade Treatment: Stone Washed
Handle: Titanium folders and G-10 grips
Blade length: 94mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 206mm.
Thickness when closed: 15mm.
Weight: 132g.
Closure: Liner Lock
Clip: Removable, titanium
Packaging: cardboard box with Fantoni logos
Notes: Limited and numbered edition made of only 100 pieces - Opening via Carson Flipper system - Design by William W. Harsey

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition, sheath shows signs of time and has poor retention of the knife
* Commercially available: Discontinued and company no longer in operation.
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Absent
* Scabbard: Present, with signs of time and poor knife retention.
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory

Intended Use: Tactical/Collection

Type of production: industrial
Country of manufacture: Italy
Blade: full tang, stainless steel CPM-S35VN at 61/62HRC
Blade finish: Stonewashed
Handle: G10, handcrafted
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 200mm.
Balance: set back 2cm. from the lower guard branch
Weight: 124g.
Sheath: leather, with vertical belt loop
Packaging: absent
Notes: Design by W. Harsey - knife previously purchased, from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition, the sheath and box show some minor signs of time
* Commercially available: Discontinued and company no longer operating
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present, with some signs of time
* Scabbard: Present, with some signs of time.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Tactical/Collection

Type of production: industrial
Country of manufacture: Italy
Blade: full tang, stainless steel CPM-S35VN at 61/62HRC
Blade finish: Stonewashed
Handle: G10
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 200mm.
Balance: set back 2cm. from the lower guard branch
Weight: 124g.
Sheath: leather, with vertical belt loop
Packaging: cardboard box with Fantoni logos, warranty certificate with technical specifications
Notes: Design by W. Harsey - knife previously purchased, from private collection

Intended use: Tactical / Military

Type of production: Industrial
Country of production: China
Blade: 2Cr13 stainless steel
Blade finish: Dual Tone: satin with black finishes
Handle: TPR (Thermoplastic Rubber)
Blade length: 133mm.
Blade thickness: 7mm.
Total length: 241mm.
Weight: 184g.
Sheath: belt, for vertical port, in TPU (Thermoplastic Polyurethane)
Packaging: Cardboard box with United Cutlery logos
Note: -

Intended use: Tactical / Military

Type of production: Industrial
Country of production: China
Blade: full tang in 2Cr13 stainless steel
Blade finish: Dual Tone: satin with black finishes
Handle: FRN (Fiberglass and Nylon)
Blade length: 133mm.
Blade thickness: 7mm.
Total length: 260mm.
Weight: 340g.
Sheath: belt, for vertical port, in polymers and nylon
Packaging: Cardboard box with United Cutlery logos
Note: -

Intended use: sports

Type of production: industrial
Lama production: Taiwan
Blade: 440 stainless steel
Blade treatment: -
Handle: kraton
Blade size: 140mm.
Total length: 290mm.
Weight: 238g.
Closing: -
Clip: -
Sheath: in cordura.
Note:

Type of production: industrial

Lama production: China
Blade: 3Cr13 steel
Blade treatment: satin finish
Handle: micarta
Blade length: 329mm.
Blade thickness: 5mm.
Total length: 473mm.
Balancing: set back
Sheath: Nylon sheath
Packaging: in cardboard
Weight: 624gr.

Type of production: industrial

Lama production: China
Blade: 3Cr13 steel
Blade treatment: satin finish
Handle: micarta
Blade length: 325mm.
Blade thickness: 4mm.
Total length: 470mm.
Balancing: set back
Sheath: leather sheath
Packaging: in cardboard
Weight: 710 gr.
Invia commenti
Cronologia
Salvate
Community

Type of production: industrial
Lama production: China
Blade: 3Cr13 steel
Blade treatment: satin finish
Handle: Pakkawood wood
Blade length: 300mm.
Blade thickness: 4mm.
Total length: 455mm.
Balancing: set back
Sheath: -
Packaging: in cardboard
Notes: Limited edition of 3000 pieces, each knife is numbered with certificate and supplied with a wooden plate to be displayed on the wall

Intended use: Tactical / Sports

Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 61 / 62HRC
Blade treatment: Stone Washed
Grip: titanium folders and G-10 grips
Blade length: 94mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 206mm.
Thick when closed: 15mm.
Weight: 132g.
Closure: Liner Lock
Clip: Removable, titanium
Packaging: cardboard box with Fantoni logos
Notes: Opening via the Carson Flipper system - Design by William W. Harsey

The seventh edition in the Legends In Steel® Collection, a series of historically inspired designs of medieval European period blades, is the dagger and signet ring of the mythical Sir Gawaine, who was King Arthur’s nephew and one of the “Knights of the Round Table.” This classic dagger features intricately detailed cast metal parts with an antique silver plated finish and a leather-wrapped grip. The pommel and signet ring both feature matching seals. Includes a certificate of authenticity and a wood display stand with signet ring holder.

UC1389 Gawaine™ knife
Overall LENGTH: 15-5/16"
BLADE LENGTH: 9-3/4"
BLADE THICKNESS: 5/32"
BLADE MATERIAL: 420 stainless steel, double-edged, milled blood groove on both sides.
handle MATERIAL: Cast metal guard and pommel with an antique silver plated finish, genuine leather-wrapped grip.
Display: 5-3/4" x 5-3/8" x 4-7/8" wood, includes hardware, instructions. 
Legends in Steel® is a registered trademark of United® Cutlery Corp.

For over half a century, Gil Hibben has been creating a very diverse collection of designs, from the Rambo III Bowie, to intricately detailed fantasy works of art, to game hunting knives and functional designs used by our servicemen. 2007 marks the 50th anniversary of Gil Hibben's career and he continues to stand at the forefront of the custom knife design trade. Gil was recently elected president of the Knifemakers Guild and was awarded with the prestigious Red Watson Memorial Friendship Award.

The Immortal, the seventeenth edition in the Hibben Annual Fantasy Knife Series, ushers in a new era of the Hibben fantasy knife with its chrome plated solid metal handle parts and imitation amber grip accented with stainless steel twisted wire wrap. The Immortal Autographed Edition is strictly limited to 3000 individually serialized pieces and is presented with an imitation leather sheath personally autographed by the knife's creator, Gil Hibben.

The Immortal - 2007 Gold Edition

• Overall Length: 24"

• Blade Length: 15-9/16"

• Blade Material: 420 stainless steel, double edged

• Handle: Solid metal parts, chrome plated finish,
  imitation amber grip, stainless steel twisted wire-wrap.

• Sheath: Imiataion leather.

• Packaging: Two piece styrofoam mold, color sleeve, heavy cardboard remailer.

Fantasy knife designed in 2002 by the famous knifemaker Gil Hibben and produced by United Cutlery
6 420 steel blades

- finely machined handle in solid metal
- wooden support to expose the knife
- total length 40 cm
- weight: 945gr.

notes: very rare knife

Type of production: Industrial
Lama production: China
Blade: stainless steel 2Cr13
Blade treatment: Painting
Handle: Nylon and Glass Fiber
Blade length: 18 cm
Blade thickness: 10mm. In the central point
Length closed: -
Total length: 22.5 cm
Thickness when closed: -
Balancing: -
Weight: 355g.
Closure: -
Clip: -
Sheath: Nylon
Packaging: cardboard box with United Cutlery logos
Note: -

Intended use: Tactical / Sports

Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 61 / 62HRC
Blade treatment: Stone Washed
Grip: titanium folders and G-10 grips
Blade length: 94mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 206mm.
Thick when closed: 15mm.
Weight: 132g.
Closure: Liner Lock
Clip: Removable, titanium
Packaging: cardboard box with Fantoni logos
Notes: Opening via the Carson Flipper system - Design by William W. Harsey

Intended use: Utility / Collection

Type of production: Industrial
Blade: CPM-S30V stainless steel 61-62HRC
Blade treatment: Stone-Washed
Country of production: Maniago - Italy
Handle: buffalo horn
Blade length: 75mm.
Blade thickness: 3.2mm.
Closed Length: 102mm.
Overall length: 178mm.
Weight: 109g.
Lock: Back Lock
Clip: reversible, stainless steel
Notes: two-handed blade opening - Design by T. Rumici

Intended use: Tactical / Sports

Type of production: Industrial
Production Country: Italy
Blade: stainless steel CPM-S35VN 61 / 62HRC
Blade treatment: Stone Washed
Handle: Titanium and G-10
Blade length: 94mm.
Blade thickness: 4mm.
Closed Length: 116mm.
Overall length: 206mm.
Thick when closed: 15mm.
Weight: 132g.
Lock: Liner Lock
Clip: Removable, titanium
Packaging: cardboard box with logos Fantoni
Notes: Opening via Carson Flipper system - Design by William W. HARSEY

Intended use: Tactical / Collection

Type of production: Industrial
Blade: CPM-S35VN stainless steel 61-62HRC
Blade treatment: Black PVD
Production Lama: Italy
Handle: Micarta type Loveless
Blade length: 90mm.
Blade Thickness: 4mm.
Closed Length: -
Overall length: 200mm.
Balancing: backward to 2 cm. the branch of the lower guard
Weight: 124g.
Closed: -
Clip: -
Sheath: Kydex with Tech Lock
Notes: Design by W. HARSEY

Intended use: Tactical / Collection

Type of production: Industrial
Blade: CPM-S35VN stainless steel 61-62HRC
Blade treatment: Stone Washed
Country of production: Italy
Handle: Black G10
Blade length: 90mm.
Blade Thickness: 4mm.
Overall length: 200mm.
Balancing: backward to 2 cm. the branch of the lower guard
Weight: 124g.
Sheath: Leather
Notes: Design by W. HARSEY

Intended use: Fighter / Tactical / Collection

Type of production: industry
Blade: stainless steel CPM-S30V to 61-62HRC
Blade reatment: Stone Washed
Production Country: Italy
Handle: Micarta Loveless type
Blade length: 80mm.
Blade Thickness: 4mm.
Overall length: 170mm.
Balancing: back to 1cm. from the branch of the lower guard
Weight: 69g.
Sheath: leather, entirely Made in Italy
Notes: Design by T. Rumici

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel CPM-S35VN 61/62HRC
Blade Treatment: Stone Washed
Handle: Titanium and G-10
Blade Length: 94mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 206mm.
Thickness when closed: 15mm.
Weight: 132g.
Closure: LinerLock in titanium
Clip: Removable and reversible, in titanium
Package: Cardboard box with Fantoni logos
Notes: Opening by Carson Flipper system - Design by William W. Harsey

Intended Use: Sport / Tactical / Collection

Type of production: Industrial
Blade: Stainless steel CPM-S30V 61-62HRC
Treatment Lama: Stone-Washed
Production Lama: Italy
Handle: G10 Orange
Blade length: 75mm.
Blade Thickness: 3.2mm.
Closed Length: 102mm.
Overall length: 178mm.
Balancing: -
Weight: 109g.
Closure: Back Lock
Clip: Reversible, Steel
Notes: Design by Rumici T. and M. Fantoni - First production run limited edition in just 25 numbered pieces of blade and box.

Intended Use: Sport / Tactical / Collection

Type of production: Industrial
Blade: Stainless steel CPM-S30V 61-62HRC
Treatment Lama: Stone-Washed
Production Lama: Italy
Handle: G10 Black
Blade length: 75mm.
Blade Thickness: 3.2mm.
Closed Length: 102mm.
Overall length: 178mm.
Balancing: -
Weight: 109g.
Closure: Back Lock
Clip: Reversible, Steel
Notes: Design by Rumici T. and M. Fantoni - First production run limited edition in just 25 numbered pieces of blade and box. Exemplary number 23 of 25.

Destinazione d'uso: Tattico/Collezione

Tipo di produzione: industriale
Lama: in acciaio inox CPM-S35VN a 61-62HRC
Trattamento Lama: Stone Washed
Produzione Lama: Italia
Manicatura: Micarta tipo Loveless
Lunghezza lama: 90mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 200mm.
Bilanciatura: arretrata a 2 cm. dal ramo di guardia inferiore
Peso: 124g.
Chiusura: -
Clip: -
Fodero: in Kydex, con attacco tipo Tek-Lok
Note: Design by W. Harsey

Intended use: Tactical / Sport

Type of production: Industrial
Production Blade: Italy
Blade: CPM-S35VN steel 60/61HRC
Treatment Blade: Stone Washed
Handle: Titanium and G-10
Blade length: 107mm.
Blade thickness: 4mm.
Closed Length: 130mm.
Overall length: 240mm.
Thick when closed: 17mm.
Balancing: -
Weight: 170g.
Lock: Liner Lock
Clip: Removable, titanium
Sheath: -
Packaging: cardboard box
Notes: Design by William W. Harsey

Harley Davidson Freedom Blade 1999 Limited Edition - Knife

Intended Use: Collection

Official Harley Davidson Product Freedom Collection Limited Edition 5000 pieces produced by United Cutlery

Type of production: Industrial
Production Blade: Taiwan
Blade: stainless steel 420
Treatment Blade: -
Handle: Metal
Blade length: 230mm.
Blade thickness: 4mm.
Length closed: -
Overall length: 430mm.
Balancing: -
Weight: 780g.
Closure: -
Clip: -
Support: wooden wall with leather
Packing: Guard and false gold plated - Warranty - Cardboard box logos with The Expendables
Note: Certificate of authenticity '- serial number engraved on the blade

Harley Davidson Freedom Blade 1999 Limited Edition - Knife

Intended Use: Collection

Official Harley Davidson Product Freedom Collection Limited Edition 5000 pieces produced by United Cutlery

Type of production: Industrial
Production Blade: Taiwan
Blade: stainless steel 420
Treatment Blade: -
Handle: Metal
Blade length: 230mm.
Blade thickness: 4mm.
Length closed: -
Overall length: 430mm.
Balancing: -
Weight: 780g.
Closure: -
Clip: -
Support: wooden wall with leather
Packing: Guard and false gold plated - Warranty - Cardboard box logos with The Expendables
Note: Certificate of authenticity '- serial number engraved on the blade

Fantoni - William W. Harsey HB 01 CPM-125V limited edition - knife

Intended use: Tactical / Sport

Type of production: Industrial
Production Blade: Italy
Blade: Stainless CPM-125V 62/63HRC
Treatment Blade: Stone Washed
Handle: Titanium and G-10
Blade length: 107mm.
Blade thickness: 4mm.
Closed Length: 130mm.
Overall length: 240mm.
Thick when closed: 17mm.
Balancing: -
Weight: 170g.
Lock: Liner Lock
Clip: Removable, titanium
Sheath: -
Packaging: cardboard box
Notes: Design by William W. Harsey - limited edition of 100 pieces

United - GH5027 Hibben Legacy Bowie knife -

Intended Use: Sport / Collection
Type of production: Industrial
Production Lama: China
Blade: 7Cr17MoV stainless steel
Treatment Blade: Mirror polished
Handle material: Micarta
Blade length: 145mm.
Blade thickness: 5mm.
Length closed: -
Total length: 305mm.
Thick when closed: -
Balance: -
Weight: 348g.
Closing: -
Clip: -
Sheath: Black leather
Packaging: Cardboard box with logos United Cutlery - Warranty
Notes: Design by Gil Hibben and Wesley Hibben

Blade: 7Cr13 Stainless Steel
Handle: Kraton
Blade Length: 103mm.
Blade Thickness: 4.5mm.
Overall Length: 225mm.
Weight: 164g.
Lock: -
Clip: -
Sheath: ABS
Notes: -

Blade: 7Cr13 Stainless Steel
Handle: Kraton
Blade Length: 103mm.
Blade Thickness: 4.5mm.
Overall Length: 225mm.
Weight: 164g.
Lock: -
Clip: -
Sheath: Black Leather with clip
Notes: -

From the dynamic universe of the "Blade" film comes this authenticated and officially licensed reproduction of the "Blade Trinity", directed from the final film in the trilogy.

This piece dating back to 2005 was designed directly from the original film studio prop and measures over 30cm in length. Every detail has been precisely replicated to satisfy even the most demanding collectors.

The 16.5cm long blade is made of mirror-polished 420 stainless steel and the handle features an antique silver plated finish with solid metal parts and a black rubber handle.

Each dagger is accompanied by a black enameled wood and stainless steel display stand featuring BLADE's logo medallion, from which the blade can be removed for display.

This collectible is a must for fans of the daytime vampire hunter, Blade, played by Wesley Snipes, in his final conflict against the vampires in the film "Blade Trinity", written and directed by David S. Goyer.

The United Cutlery GH5003 throwing knife set, designed by the legendary master knifemaker Gil Hibben, is an excellent choice for throwing enthusiasts and professionals. Each knife is made of 420 stainless steel, known for its strength and durability, and features a full tang skeletonized design, offering perfect balance and a secure grip. The sharp blade and aerodynamic shape ensure a stable trajectory and effective target penetration. The set includes three identical knives and a faux leather sheath, ideal for transport and storage. This kit is perfect for those looking to improve their accuracy with professional knives designed by an industry icon.

Intended Use: Collection

Type of production: Industrial
Production Lama: China
Blade: AUS-6 stainless steel
Treatment Lama: -
Handle material: Wood and avoriolina scrimshaw printed with "The Expendables"
Blade length: 300mm.
Blade thickness: 5mm.
Length closed: -
Total length: 440mm.
Thick when closed: -
Balance: -
Weight: 675g.
Closing: -
Clip: -
Sheath: Leather
Packaging: Guard and false gold plated brass - Warranty - Cardboard box with logos The Expendables
Notes: Exact replica behind movie licenses in the film directed by and starring Sylvester Stallone: The Expendables II (Mercenaries II)

Intended Use: Sport / Collection
Type of production: Industrial
Production Lama: China
Blade: 7Cr17MoV stainless steel
Treatment Blade: Mirror polished
Handle: Wood
Blade length: 240mm.
Blade thickness: 5mm.
Length closed: -
Total length: 380mm.
Thick when closed: -
Balance: -
Weight: 540g.
Closing: -
Clip: -
Sheath: Black leather
Packaging: Cardboard box with logos United Cutlery - Warranty
Notes: Design by Gil Hibben

ntended use: Tactical / Sports

Type of production: Industrial
Production Lama: Italy
Blade: Stainless CPM-S35VN 61 / 62HRC
Treatment Lama: PVD
Handle: Titanium and G-10
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 100mm.
Overall length: 180mm.
Thick when closed: 15mm.
Balancing: -
Weight: 88g.
Lock: Liner Lock
Clip: Removable, titanium
Sheath: -
Packaging: cardboard box
Notes: Design by William W. HARSEY

Fantoni - D. Sinkevich C.U.T. Fixed Blade - Knife

Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel CPM-S30V 61/62HRC
Treatment Blade: Satin
Handle: G-10
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: -
Overall length: 228mm.
Thick when closed: 16mm
Balancing: -
Weight: 175g.
Closure: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos Fantoni
Notes: -

Intended Use: Sport / Tactical / Collection

Type of production: Industrial
Blade: Stainless steel CPM-S30V 61-62HRC
Treatment Lama: Stone-Washed
Production Lama: Italy
Handle: Buffalo Horn
Blade length: 75mm.
Blade Thickness: 3.2mm.
Closed Length: 102mm.
Overall length: 178mm.
Balancing: -
Weight: 109g.
Closure: Back Lock
Clip: Reversible, Steel
Notes: Design by Rumici T. and M. Fantoni

Intended use: Utility / Collection

Type of production: Industrial
Blade: CPM-S30V stainless steel 61-62HRC
Blade treatment: Stone-Washed
Country of production: Maniago - Italy
Handle: stag horn
Blade length: 75mm.
Blade thickness: 3.2mm.
Closed Length: 102mm.
Overall length: 178mm.
Weight: 109g.
Lock: Back Lock
Clip: reversible, stainless steel
Notes: two-handed blade opening - Design by T. Rumici

Set of three throwing knives with excellent performance designed by Gil Hibben. Accompanied by triple cordura scabbard.

Blade: 420 satin steel
Overall length: 220 mm.
Blade width: 110 mm.
Weight: 160 g.
Sheath: Black Cordura

Model Name: Navros Dagger
Edition: Limited, 1,500 serialized pieces
Manufacturer: United Cutlery Brands

Product Description:
This collectible dagger, known as the "Blade of Ancient Chaos", was once the weapon of the wizard Navros. Also known as the Wizard's Dagger, it features a hilt crafted from faux amber and solid metal handle parts with an antique silver plated finish. The pommel is adorned with twin hawk heads, while the spell of Evruc, Ancient One of the Fourth Age, is engraved on the blade.

Characteristics:

Blade length: 34.93 cm
Total Length: 52 cm
Handle Material: Solid metal, faux amber details
Finish: Antique silver plating on metal parts of the handle
Blade: Cast metal, bright nickel plated, unsharpened

Features of the Special Edition:

Handle Finish: Solid metal parts with 24-K gold plated finish
Figurine: Wooden display base with hand-painted figurine of Vaelen holding the Navros Dagger
Authenticity: Each piece is individually serialized and includes an art print signed by fantasy artist Kit Rae, plus a certificate of authenticity

Presentation:

The dagger is accompanied by an exclusive art print by Kit Rae, "The Blade of Navros", and a solid wood display stand.

Warnings:

Kit Rae products are high-quality collectibles produced exclusively by United Cutlery Brands. Beware of imitations; always check for the presence of the Kit Rae seal or logo to guarantee the authenticity of the product.
This dagger is not only a work of art but also a piece of imaginative history, making it a highly valuable collector's item for fans of the fantasy genre and high-quality blacksmithing.

Rare pair of knives produced by United and designed by the renowned knives maker Gil Hibben. These knives come from a private collection and are in excellent condition, with original box but without sheath

United Kempo II UC1168
This model stands out for its unique features, suitable for Kenpo Karate enthusiasts. The UC1168 Kempo II knife, introduced in 1998 and later replaced by the Alaskan knife in 2003, features a Kenpo Karate emblem on the handle. The design includes a grip-enhancing angled guard, stylized after Kenpo's "Chinese Fist" grip for added stability and control. This knife measures approximately 31cm in total with an 18cm blade, made from stainless steel.

Type of production: industrial
Blade: 420 stainless steel
Country of production: Taiwan
Handle: micarta
Blade length: 165mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Weight: 521g.
Sheath: without sheath
Notes: original box, produced in 1998

The handle design and medallion make it a distinctive piece in any collection.

It comes in the original box, maintaining its impeccable condition, although it lacks a scabbard.

Pro Guide Hunter UC1203
The Pro Guide Hunter UC1203, dated 1999, is ideal for hunting and outdoor activities. This knife is manufactured by United Cutlery under the design expertise of Gil Hibben. The Pro Guide Hunter is recognized for its sturdy construction and ergonomic handle, which ensures comfort and efficiency during use. Like the UC1168, it is sold with its original box but without the sheath.

Type of production: industrial
Blade: 420 stainless steel
Country of production: Taiwan
Handle: micarta
Blade length: 110mm.
Blade thickness: 5.5mm.
Total length: 235mm.
Weight: 207g.
Sheath: without sheath
Notes: original box, produced in 1999

Intended Use: Collection

Type of production: Industrial
Production Lama: China
Blade: 3Cr13 stainless steel 50/52
Treatment Lama: -
Handle: avoriolina scrimshaw printed with "The Expendables"
Blade length: 340mm.
Blade thickness: 4mm.
Length closed: -
Total length: 480mm.
Thick when closed: 8mm.
Balance: -
Weight: 800g.
Closing: -
Clip: -
Sheath: Black leather
Packaging: Guard and false gold plated - Warranty - Cardboard box with logos The Expendables
Notes: Exact replica behind movie licenses in the film directed by and starring Sylvester Stallone: The Expendables (The Expendables)

Fantoni - Mix - Green G10 - knife

Intended Use: Sport / Tactical

Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel CPM-S30V
Treatment Blade: Stone Washed
Handle: G-10 and Stainless Steel
Blade length: 87mm.
Blade thickness: 3mm.
Closed Length: 115mm.
Overall length: 203mm.
Thick when closed: 12mm.
Balancing: -
Weight: 122g.
Closure: Back Lock
Clip: Stainless Steel
Sheath: -
Packing: Carton with logos Fantoni
Notes: Design by Massimo Fantoni

Fantoni - Mix - Orange G10 knife

Intended Use: Sport / Tactical

Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel CPM-S30V
Treatment Blade: Stone Washed
Handle: G-10 and Stainless Steel
Blade length: 87mm.
Blade thickness: 3mm.
Closed Length: 115mm.
Overall length: 203mm.
Thick when closed: 12mm.
Balancing: -
Weight: 122g.
Closure: Back Lock
Clip: Stainless Steel
Sheath: -
Packing: Carton with logos Fantoni
Notes: Design by Massimo Fantoni

Fantoni - William W. Harsey HB 02 - knife

Intended use: Tactical / Sport

Type of production: Industrial
Production Blade: Italy
Blade: CPM-S30V steel 60/61HRC
Treatment Blade: Stone Washed
Handle: Titanium and G-10
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 100mm.
Overall length: 180mm.
Thick when closed: 15mm.
Balancing: -
Weight: 88g.
Lock: Liner Lock
Clip: Removable, titanium
Sheath: -
Packaging: cardboard box
Notes: Design by William W. Harsey

Intended Use: Tactical / Sports

Type of production: Industrial
Production Blade: Italy
Blade: CPM-S30V steel 60/61HRC
Blade Treatment: Stone Washed
Handle: Titanium and G-10
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 100mm.
Total length: 180mm.
Thick when closed: 15mm.
Balance: -
Weight: 88g.
Lock: Liner Lock
Clip: Removable, titanium
Sheath: -
Packaging: cardboard box
Notes: Design by William W. Harsey

Fantoni - Hide Folder Micarta - Design by T. Rumici knife

Intended use: Fighter / Tactical / Collection

Type of production: industrial
Blade: Stainless Steel CPM-S30V 61-62HRC
Treatment Blade: Stone-Washed
Production Blade: Italy
Handle: Micarta Loveless
Blade length: 75mm.
Blade Thickness: 3.2 mm.
Closed Length: 102mm.
Overall length: 178mm.
Balancing: -
Weight: 102g.
Closure: Back Lock
Clip: Reversible, Stainless Steel
Notes: Design by T. Rumici and M. Fantoni

Nuova versione 2014, ora con fodero più compatto e robusto e con attacchi di tipo Tek-Lok

Destinazione d'uso: Fighter/Tattico/Collezione

Tipo di produzione: industriale
Lama: in acciaio inox CPM-S30V a 61-62HRC
Trattamento Lama: Stone Washed
Produzione Lama: Italia
Manicatura: Micarta tipo Loveless
Lunghezza lama: 80mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 170mm.
Bilanciatura: arretrata ad 1cm. dal ramo di guardia inferiore
Peso: 69g.
Chiusura: -
Clip: in acciaio
Fodero: in Kydex, con attacco tipo Tek-Lok
Note: Design by T. Rumici

Fantoni - William W. Harsey HB 01 Desert - knife

Intended use: Tactical / Sport

Type of production: Industrial
Production Blade: Italy
Blade: CPM-S30V steel 60/61HRC
Treatment Blade: Stone Washed
Handle: Titanium and G-10
Blade length: 107mm.
Blade thickness: 4mm.
Closed Length: 130mm.
Overall length: 240mm.
Thick when closed: 17mm.
Balancing: -
Weight: 170g.
Lock: Liner Lock
Clip: Removable, titanium
Sheath: -
Packaging: cardboard box
Notes: Design by William W. Harsey

Trattandosi di un materiale naturale, segnaliamo che i modelli disponibili a magazzino potrebbero avere sfumature e colorazioni differenti dell'impugnatura

Destinazione d'uso: Sportivo/Collezione

Tipo di produzione: industriale
Lama: in acciaio 61-62HRC CPM-S30V
Trattamento Lama: Stone Washed
Produzione Lama: Italia
Manicatura 1: Corno di Bufalo
Lunghezza lama: 80mm.
Spessore della lama: 3.5mm.
Lunghezza chiuso: -
Lunghezza totale: 170mm.
Bilanciatura: arretrata ad 1cm. dal ramo di guardia inferiore
Peso: 68g.
Chiusura: -
Clip: -
Fodero: In cuoio, di primissima qualità, Made in Italy
Note: Scatola regalo cartonata, certificati di garanzia, edizione limitata e numerata di soli 18 esemplari - Design by T. Rumici

Intended use: Tactical / Sports

Type of production: Industrial
Production Country: Italy
Blade: CPM-S30V 61-62HRC 
Blade treatment: Stone Washed
Handle: Titanium and G-10
Blade length: 107mm.
Blade thickness: 4mm.
Closed Length: 130mm.
Overall length: 240mm.
Thick when closed: 17mm.
Weight: 170g.
Lock: Liner Lock
Clip: Removable, titanium
Packaging: cardboard box
Notes: Opening with Carson Flipper system - Design by William W. HARSEY

Intended use: Tactical / Sports

Type of production: Industrial
Production Country: Italy
Blade: M390 61 / 62HRC stainless steel
Blade treatment: Stone Washed
Handle: Titanium and Carbon Fiber
Blade length: 107mm.
Blade thickness: 4mm.
Closed Length: 130mm.
Overall length: 240mm.
Thick when closed: 17mm.
Weight: 170g.
Lock: Liner Lock
Clip: Removable, titanium
Packaging: cardboard box
Notes: Opening with Carson Flipper system - Design by William W. HARSEY

Intended use: Tactical / Sports

Type of production: Industrial
Production Country: Italy
Blade: M390 61 / 62HRC stainless steel
Blade treatment: Stone Washed
Handle: Titanium and Carbon Fiber
Blade length: 107mm.
Blade thickness: 4mm.
Closed Length: 130mm.
Overall length: 240mm.
Thick when closed: 17mm.
Weight: 170g.
Lock: Liner Lock
Clip: Removable, titanium
Packaging: cardboard box
Notes: Opening with Carson Flipper system - Design by William W. HARSEY