Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Commercially available: No since 2014
* Sharpening: Original
* Marks on blade: No
* Marks on handle: No
* Box: NOT present
* Checked and certified by our internal laboratory

Type of production: industrial
Blade: 440C 58HRC stainless steel
Blade treatment: Teflon
Handle: FNR
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: -mm.
Total length: 230mm.
Balancing: -
Weight: 168g.
Closure: Back Lock
Clip: stainless steel
Sheath: -
Notes: design by Jim Vagner

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, but not used.
* Condition: Overall in good condition with some aesthetic dissimilarity of the Black TiNi finish due to time
* Commercially available Discontinued
* Sharpening: Factory.
* Marks on blade: Uneven color of Black TiNi finish given by signs of time
* Marks on handle: No.
* Box: Present, worn
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory


Intended Use: Sporting

Production type: Industrial
Country of Production: Japan
Blade: Stainless steel VG-10
Blade finish: Black TiNi
Handle: Zytel with steel liners
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 210mm.
Thickness when closed: 20mm.
Weight: 135g.
Closure: Arc Lock
Clip: removable, stainless steel
Packaging: cardboard box with SOG logos
Notes: previously purchased knife, from private collection

Knife withdrawn from private collection - Rare model no longer in production.

The Zero Tolerance 0500 model, also known as MUDD, was designed by Grant and Gavin Hawk. This knife is resistant to sand, dirt, and water thanks to the neoprene seals around the pivot and the lock.

The blade is coated in Tungsten DLC, approximately 9.2 cm long, and made of 154CM steel.

The handle is made of aluminum with textured G-10 grips, providing a solid grip.

This model was manufactured roughly between 2007 and 2009, and although the exact number of pieces produced is not known, estimates suggest a low quantity, probably between 1000 and 2500 units.

NOS FULL SET KNIFE, NEW FROM STOCK

Type: withdrawn from private collection
Condition: Like new
Available in the market: Out of production since 2009
Sharpening: Factory
Marks on blade: No
Marks on handle: No
Box: Included
Sheath: -
Manuals, Certificates, and Guarantees: Included
Checked and Certified by our internal laboratory

KNIFE NOS FULL SET, NEW FROM STOCK
* Type: 2015 NOS new old stock - New from stock
* Condition: Like new, never taken out of original packaging.
* Commercially available: Hard to find
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory




Intended Use: Sporting / Collection

Production Type: Mid-Tech
Country of Production: USA
Blade: Stainless steel CPM-S35VN 58/59HRC
Blade finish: stonewashed
Handle: Titanium 6AI4V
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: 123mm.
Total length: 212mm.
Thickness when closed: 17mm.
Weight: 142g.
Closure: Frame Lock
Clip: stainless steel
Packaging: white cardboard box with Chris Reeve logos, Warranty certificates
Notes: NOS knife, new from stock - Includes box and certificates

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In like-new condition
* Commercially available Discontinued as of 2022
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present (but from a different ZT knife).
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended Use: Tactical / Sporting / Collection

Type of Production: Industrial
Country of Production: USA
Blade: Stainless steel CPM-20CV
Blade Treatment: Black DLC
Handle: Titanium Black DLC and G10
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 128mm.
Total length: 218mm.
Thickness when closed: 14mm.
Weight: 134g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings - Carson Flipper opening system

Translated with DeepL

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased from Lorenzi's cutlery shop in Milan, via Monte Napoleone, presumably in the 1980s.
* Condition: In good condition
* Commercially available: the craftsman long ago stopped making knives.
* Sharpening: Factory original, can be improved, with some cosmetic abrasion
* Marks on blade: Small marks and slight hairlines also on the through-guard.
* Marks on handle: A few small marks.
* Packaging: absent
* Scabbard: Leather, handcrafted, original, stamped "Coltelleria Lorenzi," with marks given by use and time
* Manuals, Certificates and Warranties: absent.
* Checked and Certified by our in-house laboratory

Intended use: collection/tactical

Type of production: handcrafted
Country of manufacture: USA
Blade: full tang stainless steel, steel composition not stated (presumably RWL34 or 440C)
Blade finish: mirror polish
Handle: nickel silver through-guard and brown micarta grips, with red spacers
Blade length: 97mm.
Blade thickness: 4mm.
Total length: 202mm.
Weight: 97g.
Sheath: handcrafted, leather, with stainless steel back clip
Packaging: -
Notes: Specimen presumably from the 1980s, previously purchased knife, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Factory sharpened, improvable
* Marks on blade: No
* Marks on handle: Slight, on nickel silver heads.
* Box: Absent
* Scabbard: Original, leather, with a few small marks due to age.
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory


Particular knife developed with the help of experienced falconers and especially Horst Niesters in the early 1970s.
The blade was designed to chop up food for raptors and to intercept game brought back by raptors during hunting trips. In the center of the blade is a small semicircular notch that serves to signal to the falconer that the edge is sharp from the tip of the blade to that exact point; the rest of the blade is kept blunt to protect the raptors.
PUMA's falconer's knife is designed to be very handy and absolutely practical, making it a reliable companion for hunting prey.


Intended Use: Collection / Vintage / Hunting

Type of production: semi-crafted
Country of manufacture: Germany
Blade: 440C stainless steel
Blade finish: satin-finished
Handle: wooden, with nickel silver guard and pommel
Blade length: 125mm.
Blade thickness: 3mm.
Total length: 242mm.
Balance: backward
Weight: 130g.
Sheath: leather
Packaging: -
Notes: Vintage 1970s knife - Withdrawn from private collection - Overall in very good condition

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued; Company no longer in operation as of 2017.
* Sharpening: Factory.
* Marks on blade: Normal marks, found on all Strider models with Tiger Stripe finish.
* Marks on handle: None
* Box: Originally sold unboxed
* Scabbard: Original, in Khaki-colored Cordura, by Eagle USA.
* Manuals, Certificates and Warranties:Originally sold without certificates or warranties.
* Checked and Certified by our in-house laboratory



Intended Use: Tactical / Collection

Type of manufacture:Midtech
Country of Production: USA
Blade: Stainless steel CPM-S30V
Blade Finish: Tiger Stripe
Handle: Black G-10 with GG (Gunner Grip) pattern
Blade length: 160mm.
Blade thickness: 6.3mm.
Total length: 298mm.
Weight: 353g.
Sheath: Khaki, cordura, by Eagle USA
Packaging: -
Notes: 2010 specimen in very good condition - Shows small scuff marks on the Tiger Stripe finish, which is common with any Strider model made with this matte blade finish - Strider knives have always been offered by the company without any box, packaging, manual or certificate - This historic company ceased operations in 2017, after a 25-year career - Mick Strider, the company's previous founding partner, is still in business and dedicated solely to making custom knives.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in fair condition, marks on the blade due to use and years since its production
* Commercially available: no longer in production, difficult to find, probably dating back to the 1980s or 1990s
* Sharpening: not original, the knife has been used and resharpened
* Marks on the blade: scratches, logo a little discoloured, dots due to cleaned oxidation
* Marks on the handle: yes, due to use and insertion in the sheath
* Box: unboxed
* Scabbard: original, leather and fur (presumably reindeer)
* Manuals, Certificates and Warranties: absent
* Checked and certified by our in-house laboratory

Intended use: hunting/collecting

Type of production: handcrafted
Blade: Sandvik 12C27 stainless steel
Blade treatment: polishing
Country of manufacture: Finland
Handle: bone (presumably reindeer)
Blade length: 100mm
Blade thickness: 3mm
Length closed: -
Total length: 200mm
Balance: set back approx. 10mm
Weight: 82g (121g including scabbard)
Scabbard: leather with engravings
Notes: in view of the time that has elapsed and the difficulty of finding reliable production information, the above data are to be considered indicative

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Conditions: Like new
* Commercially available: Out of production, model dating back to the 90s
* Sharpening: Factory
* Marks on blade: No
* Marks on the handle: No
* Box: without box
* Sheath: -
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory

Intended use: Collection / Vintage

Type of production: artisanal
Country of production: Germany
Blade: stainless steel
Blade finish: satin finish
Handle: ABS with metal parts
Blade length: 80mm.
Blade thickness: 2.5mm.
Total length: 185mm.
Balancing: backward
Weight: 130g.
Sheath: -
Packaging: -
Notes: Vintage 90s knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued, replaced by later Gen.
* Sharpening: Factory sharpened, but improvable
* Marks on blade: No
* Marks on handle: Small marks on hardware.
* Box: No
* Scabbard: -
* Manuals, Certificates and Warranties: No
* Checked and Certified by our in-house laboratory





Intended Use: Tactical / Collection 

Type of production: Midtech (semi-craft)
Country of manufacture: USA
Blade: Stainless steel CPM-20CV
Blade treatment: Stonewashed
Handle: 3mm thick G10 black (+ one spare in desert color) on 1mm thick 6AL4V titanium liner. Frame in 4mm thick billet 6AL4V titanium with Hinderer Lockbar Stabilizer. 17-4PH stainless steel spacers and hardware.
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 207mm.
Thickness when closed: 13mm.
Weight: 175g.
Closure: frame lock type
Clip: stainless steel 17-4PH
Notes: coyote paracord lanyard - second G10 scale, original Hinderer, in desert color - knife from private collection, previously purchased - product does not fall under "Loyalty" discounts

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased and Used.
* Condition: In good condition
* Commercially available: discontinued
* Sharpening: Factory, can be improved
* Marks on blade: Yes, small lines visible against the light
* Marks on handle: Yes, small abrasion marks on clip.
* Box: Present, but slightly damaged
* Scabbard: -
* Manuals, Certificates and Warranties: No
* Checked and Certified by our in-house laboratory




Intended Use: Sporting / Collection

Production Type: Industrial
Blade Production: USA
Blade: Stainless steel CPM-S30V Powder Steel
Blade Finish: Satin
Handle: Camo G10
Blade Length: 87mm.
Blade thickness: 3.5mm.
Length closed: 122mm.
Total length: 210mm.
Weight: 110g.
Closure: Compression Lock
Clip: painted stainless steel
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife from a private collection - product is not covered by "Loyalty" discounts

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available In production, but hard to find.
* Sharpening: Factory.
* Marks on blade: No
* Marks on handle: No
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory



Intended Use: Tactical/CQC

Production type: Industrial
Country of Production: Italy
Blade: Full tang in N690Co 58/60HRC steel
Blade finish: satin finish
Handle: olive wood
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 220mm.
Balance: backward
Weight: 200g.
Sheath: leather
Packaging: cardboard box with Fox logos
Notes: knife withdrawn from private collection - like new

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Commercially available: no longer in production since 2014
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: original ZT box
* Manuals, Certificates and Guarantees: ZT certificates
* Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Tactical / Military

Type of production: Industrial
Production Lama: USA
Blade: CPM-S30V steel
Blade treatment: Tungsten DLC Coating
Handle: Black anodized aluminum with non-slip Trac-Tec inserts
Blade length: 925mm.
Blade thickness: 4mm.
Closed length: 126mm.
Total length: 215mm.
Thick when closed: 17mm.
Balancing: -
Weight: 146g.
Closure: Liner Lock
Clip: Removable, Multiposition, in stainless steel
Sheath: -
Packaging:
Notes: Design by Ken Onion - SpeedSafe opening system

Knife withdrawn from private collection - First series (Gen1) of the model produced from 2010, born from the collaboration with Rick Hinderer - Discontinued and no longer available - Globally in very good condition with original sharpening - Supplied with custom G10 and original cheek piece, which can be installed as desired - Devoid of original packaging - Checked and certified by our in-house laboratory.

Intended Use: Sporting

Type of production: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S35VN
Blade finish: Stonewashed
Sleeve: Titanium and G-10 Black (with additional custom G10 gauntlet)
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 206mm.
Thickness when closed: 14mm.
Weight: 173g.
Closure: Frame Lock
Clip: Removable, reversible and multi-position, stainless steel
Packaging: -
Notes: Design by Rick Hinderer - Collected from private collection, overall in very good condition

Knife withdrawn from private collection - Rare model produced by Master of Defense around late 90s/early 00s and designed by James "Patches" Watson - Excellent condition. Never resharpened - No original box - Checked and certified by our workshop.

Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janick, Keating, Ayoob, Watson and Casillas.

Intended Use: Tactical/Collection
Production type: Industrial
Country of manufacture: USA
Blade: stainless steel 154CM black
Handle: aircraft grade aluminum with non-slip Kraton inserts
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed: 112mm
Total length: 200mm.
Thickness when closed: 13mm
Weight: 116g.
Closure: Liner Lock
Clip: removable, stainless steel
Notes: knife withdrawn from private collection in excellent condition

Tactical / EDC knife produced in the late 1990s withdrawn from private collection - overall in excellent condition - with factory sharpening in good condition- no packaging or manuals - checked and guaranteed by our in-house laboratory.

Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janick, Keating, Ayoob, Watson and Casillas.

Intended Use: Tactical/Collection
Production type: Industrial
Country of manufacture: USA
Blade: 154CM stainless steel with titanium nitriding
Handle: aircraft aluminum with non-slip Kraton inserts
Blade length: 85mm.
Blade thickness: 3.5mm.
Length closed: 115mm.
Total length: 197mm.
Thickness when closed: 13mm
Weight: 108g.
Closure: Button Lock
Clip: removable, stainless steel
Packaging: knife withdrawn from private collection, overall in very good condition

Knife from private collection, presumably early 1980s, in perfect, like new condition with wooden case and numbered certificate of authenticity. Limited edition specimen with serial number #0005 - Checked and certified by our in-house laboratory.

Intended use: collection

Type of production: handcrafted
Country of manufacture: France
Blade: 440A stainless steel
Handle: ivory
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 220mm.
Thickness when closed: 16mm.
Weight: 72g.
Closure: Slip Joint
Packaging: wooden case with numbered certificate of authenticity
Notes: 1980s vintage knife from private collection, in mint condition

Knife withdrawn from private collection - Overall in very good condition, however, the previous owner removed the clip from the knife, a clip no longer present inside the package and therefore not provided - The knife still has the factory sharpening which should be slightly brightened, however - Supplied with original Spyderco cardboard box - Checked and certified by our in-house laboratory.

Intended Use: Sporting

Type of manufacture: industrial
Blade: stainless steel VG-10
Blade finish: satin
Country of manufacture: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 220mm.
Thickness when closed: 15.5mm.
Weight: 94g.
Locking system: Back Lock
Clip: -
Notes: knife withdrawn from private collection, clipless, overall in very good condition

From a private collection - 2011 model currently discontinued and no longer available - Winner of the 2010 Blade Show Award as the most innovative knife of the year - Overall in very good condition - Blade has a couple of small, shallow scratches and a speck of oxidation, handle has a small abrasion at the front - Free of box and accessories - Professionally regrind, inspected and guaranteed by our in-house workshop.

Intended Use: Sporting

Production type: Industrial
Country of Production: Italy
Blade: D2 steel at 59HRC
Surface finish: Satin finish
Handle: Monoblock, machined from solid, anodized Ergal 7075
Blade length: 95mm.
Blade thickness: 4.5mm.
Total length: 210mm.
Thickness when closed: 9mm.
Weight: 155g.
Closure: Frame Lock, with additional Rotoblock security system
Clip: removable and reversible, stainless steel, deep pocket type, with glass breakthrough pin
Packaging: -
Notes: Winner of Blade Show Award 2010 as most innovative knife of the year - knife collected from private collection globally in excellent condition

Knife from private collection - Knife in mint condition, brand new - Checked and certified by our in-house laboratory.

Intended Use: Collection / Heavy Duty

Type of production: Handcrafted
Country of manufacture: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Raw
Handle: 2mm titanium folders with micarta handle
Blade length: 93mm.
Blade thickness: 5mm.
Length closed: 124mm.
Total length: 214mm.
Thickness when closed: 24mm.
Weight: 167g.
Opening: Carson Flipper system / Ambidextrous opening pins on blade
Closure: Rockers Arm 8.11
Clip: stone washed titanium, removable and reversible
Packaging: -
Notes: Limited Edition handcrafted by Dino Picco of Wander Tactical

The Buck 124 was originally designed in 1966 as a dive combat knife called the Nemo. The model then went into production in 1967 and was offered with either a dive sheath (NEMO) or a leather sheath (FRONTIERSMAN). The knife was the same and has remained so to this day.

In the 1960s about 300 examples were produced and they had black phenolic handles with white Teflon spacers. Then in the 1970s it had a fluctuating production, with very poor sales numbers, until in '73 it was offered with a "Buckarta" (Micarta) handle and began to find favor with the public, with over 10000 examples sold until the early 1980s. Until 1983 model production remained high, and in 1984 a version of the FRONTIERSMAN with a Pakkawood handle was introduced; the 1984 version did not have the patent logos engraved, the 1985 version had the patent engravings, and from 1986 the knife began to have the production date engraved on the blade.

Therefore, our proposed model is from 1984.

Knife withdrawn from private collection - Classic Buck model dating from 1984, first series with wooden handle - Overall in very good condition, with no particular noticeable marks, with a few small scratches on aluminum guard and pommel - Scabbard in excellent condition - Original factory sharpening, but underperforming - Lacking box and certificates - Checked and certified by our in-house laboratory.

Intended Use: Hunting / Utility / Multirole / Collection

Type of production: Industrial
Country of manufacture: USA
Blade: full tang, 425M stainless steel
Blade finish: satin-finished
Handle: Pakkawood
Blade length: 159mm.
Blade thickness: 4.5mm.
Total length: 300mm.
Balance: backward
Weight: 377g.
Sheath: black leather
Packaging: absent
Notes: knife withdrawn from private collection, 1984 specimen, overall in very good condition

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Like new
* Commercially available: Discontinued - the company has permanently ceased operations.
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present, new and perfect
* Scabbard: Present, like new.
* Manuals, Certificates and Warranties: No
* Checked and Certified by our in-house laboratory


Intended Use: hiking / utility

Production type: Industrial
Country of manufacture: USA
Blade: Fulltang, D2 steel with powder finish
Handle: Micarta
Blade length: 99mm.
Blade thickness: 3.5mm.
Total length: 200mm.
Balance: backward
Weight: 157g.
Sheath: thermoplastic, with TEK-LOK attachment
Notes: knife like new, withdrawn from private collection

Iconic knife produced by Puma and dating back to the late 1980s, characterized by a then very modern line and a very advanced steel for the time (154CM).  Knife withdrawn from private collection - Overall in very good condition - Never used, never sharpened, still with factory sharpening - A few small marks on the right side handle, in concomitance with the sheath that goes to hook the knife through a pin that tends to irreparably rub the handle itself - Supplied with original wooden case and leather sheath - Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Collection / Vintage / Tactical

Type of production: handcrafted
Country of manufacture: Germany
Blade: stainless steel 154CM
Blade finish: satin-finished
Handle: Integral, stainless steel and Micarta
Blade length: 160mm.
Blade thickness: 5.5mm.
Total length: 290mm.
Balance: backward
Weight: 285g.
Sheath: leather
Packaging: wooden case
Notes: 1980s Vintage knife - Limited edition of only 500 pieces, numbered on the blade, specimen 170 of 550 - Knife withdrawn from private collection globally in excellent condition

Knife from a private collection - Very rare and highly sought after discontinued model dating back to 2000 - Peculiar tanto blade with chisel sharpening - This is a scaled down version of Timberline's Specwar model made in collaboration with Emerson - Like new, never used, perfect in every detail, with warranty and immaculate box - Checked and certified by our in-house laboratory.

Intended Use: Tactical / Collection

Type of manufacture: Industrial
Country of Production: USA
Blade: 440C stainless steel with chisel sharpening
Blade finish: matte microbead blasting
Handle: Nylon and Fiberglass
Blade length: 95mm.
Blade thickness: 2.5mm.
Total length: 220mm.
Weight: 105g.
Sheath: Kydex
Notes: 2000 knife from a private collection - Like new

Knife withdrawn from a private collection - Rare model produced by the Master of Defense around 2001 - Excellent condition. Never resharpened - Without original box - Checked and certified by our internal laboratory Coltelleria Collini.

Tactical / EDC knife manufactured in the late 1990s and designed by martial arts expert Michael Janich,

Master of Defense, an eclectic American brand no longer in business and later taken over by Blackhawk! Blades, produced various tactical and military type folding and fixed knives, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.

The only copy at our disposal, without box, very rare and out of production for many years.

Intended use: Tactical / Collection
Type of production: Industrial
Production Lama: USA
Blade: 154CM stainless steel
Handle: Aviation aluminum with Kraton anti-slip inserts
Blade length: 86mm.
Blade thickness: 3.5mm.
Closed length: 112mm
Total length: 200mm.
Thick when closed: 13mm
Weight: 120g.
Closure: Liner Lock
Clip: removable, in stainless steel
Packaging:

Withdrawn from a private collection and out of production for years - with original box and certificates - in like new condition - Checked and certified by our in-house laboratory.

Intended use: Sports / Collection

Type of production: Semi-Industrial
Production Lama: Italy
Blade: Elmax 60 / 61HRC steel
Blade treatment: -
Handle: Titanium and G10
Blade length: 90mm.
Blade thickness: 4.5mm.
Total length: 207mm.
Thick when closed: 9mm.
Balancing: -
Weight: 168g.
Closure: Frame Lock with Rotoblock safety system
Clip: removable and reversible, in stainless steel
Sheath: -
Packaging: with Spyderco logo
Note:

more information: https://www.spyderco.com/catalog/details.php?product=908

* Type: Previously purchased and used
* Condition: In like new condition - manufactured in 2010
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: No
* Marks on handle:  No
* Packaging: Yes
* Sheath: /
* Manuals, Certificates and Warranties: Yes
* Checked and Certified by our internal laboratory

Intended use: collection/sports

Production type: Mid-Tech
Country of production: USA
Blade: CPM-S30VN 58/59HRC stainless steel
Handle: Micro-shot peened titanium
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 210mm.
Closed thickness: 17mm.
Weight: 134g.
Closure: Frame Lock
Clip: removable, titanium
Packaging: white cardboard box with Chris Reeve logos and warranty certificates

Knife withdrawn from a private collection - Excellent condition, has small marks and scratches on the titanium sleeve, factory sharpened - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: Tactical / EDC / Collection

Type of production: semi-artisan
Country of production: USA
Blade: in CTS-XHP Black stainless steel
Blade treatment: Black PVD
Handle: Grade 5 titanium
Blade length: 92mm.
Blade thickness: 5mm.
Length closed: 122mm.
Total length: 216mm.
Thick when closed: 13.2mm.
Balancing: -
Weight: 187g.
Opening: titanium thumbstood for right-handers
Washers: Steel ball bearings
Closing: Framelock
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Knife withdrawn from a private collection - Rare model produced by Spyderco to commemorate New York police officer John D'allara who died when he entered the World Trade Center on September 11, 2001 - no longer in production since 2005 - Like new condition - With original box - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: Sports

Type of production: Industrial
Blade production: Japan
Blade: VG10 Stainless Steel
Handle: FRN with drowned stainless steel folders
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 203mm.
Weight: 164g.
Closing: Spyderco’s Ball Bearing Lock
Clip: stainless steel
Packaging: with box
Notes: -

Knife withdrawn from a private collection - Rare model made by the famous knifemaker Brian Tighe in 2005 - Like new condition. Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: collection

Type of production: custom
Blade production: U.S.A.
Blade: BG-42 stainless steel
Blade treatment: Satin
Handle: titanium and carbon fiber
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 198mm.
Thick when closed: 14mm
Balancing: -
Weight: 103g.
Closure: Liner Lock
Clip: titanium
Sheath: -
Note: -

Knife withdrawn from a private collection - Rare model made by the famous knifemaker Brian Tighe in 2005 - Like new condition. Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: collection

Type of production: custom
Blade production: U.S.A.
Blade: BG-42 stainless steel
Blade treatment: Satin
Handle: titanium
Blade length: 953mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Thick when closed: 10mm
Balancing: -
Weight: 108g.
Closure: Frame Lock
Clip: titanium
Sheath: -
Note: -

Destination: Military/Tactic/Collection

Type of manufacturing: industrial
Blade: W 1.4116 inox
Blade Treatment: IDROGLIDER GOLD® Black
Made in: Italy
Handle: Nylon reinforced with fiber glass, PP and TPE
Blade Length: 160mm.
Blade Thickness: 4,5mm.
Total Length: 290mm.
Balancing: on knife's guard
Weight: 288g. (with sheath 534g.)
Sheath: cordura with thigh band
Note: -

Destination: training knife, rounded point and dull edge

Type of manufacturing: industrial
Blade: stainless steel W 1.4116 - 55-56HRC
Blade Treatment: stonewash
Made in: Italy
Handle: polymers, REMOVABLE
Blade Length: 160mm.
Blade Thickness: 4mm.
Total Length: 290mm.
Balancing: toward the point, at 1 cm from knife guard
Weight: 314g. (474g. with sheath)
Sheath: cordura, with thigh band
Note: -