Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Zero Tolerance - KVT Folder Knife - MagnaCut & Carbon Fiber - ZT0545 - Knife
The slim profile and carbon fiber handle provide comfortable and lightweight carry for the Zero Tolerance 0545. Moreover, the 0545 model is appropriately sized for serious cutting tasks. The CPM MagnaCut steel blade is balanced and highly performant.
Aesthetically, this ZT Original boasts a clean design without visible screws for the pocket clip.
Produced in the United States, the premium CPM MagnaCut steel of the blade, achieved through powdered metallurgy, excels in edge retention, corrosion resistance, wear resistance, and toughness; the stonewashed finish helps conceal signs of use.
The blade opens easily and effortlessly thanks to the KVT system with ball bearings, washers, and flipper.
Intended use: EDC/Sport/Collection
Production type: Industrial
Blade production: USA
Blade: CPM Magnacut Steel 60-63 HRC
Blade treatment: Stone Wash
Handle: Carbon Fiber and Titanium
Blade length: 81mm
Blade thickness: 2.3mm
Closed length: 109mm
Overall length: 190mm
Weight: 57g
Locking mechanism: Frame Lock
Clip: Removable, multiposition, stainless steel
Packaging: Cardboard box with Zero Tolerance logos
Notes: KVT opening on ball bearingsZT0545 -
Zero Tolerance - Sinkevich Folder - 0450BLUCF - Flipper Knife Blue CF - Knife
As an elegant and refined alternative to the original 0450, Zero Tolerance presents the 0450BLUCF model with that extra touch.
The CPM MagnaCut blade steel represents exceptional toughness, wear resistance, and unparalleled edge retention.
The classic stonewash finish of the blade with ball bearings highlights the robust side of the Frame Lock Folder and complements the blue marbled carbon front handles and the titanium handle area on the back.
With a reversible clip for pocket carry and a lanyard hole. Made in the USA.
Intended use: EDC/Sport/Collection
Production type: Industrial
Blade production: USA
Blade: CPM Magnacut steel
Blade treatment: Stone Wash
Handle: Carbon Fiber and Titanium
Blade length: 82mm
Blade thickness: 3mm
Closed length: 111mm
Overall length: 187mm
Weight: 68g
Locking mechanism: Frame Lock
Clip: Removable, multiposition, stainless steel
Packaging: Cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT opening on ball bearingsZT0450BLUCF -
Zero Tolerance - ZT0006BLK - Limited Edition Sprint Run - CPM-3V & Black G10 - knife
Intended Use: Tactical / Sporting
Production type: Industrial
Country of Production: USA
Blade: full tang in carbon steel CPM-3V
Blade treatment: Black Cerakote
Handle: G10 Black with stainless steel through-guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex, with Nylon belt attachment system, removable
Packaging: cardboard box with Zero Tolerance logos
Notes: limited edition Sprint Run edition (not numbered) designed for the international market onlyZT0006BLK -
BlackFox - Artia by Grigorii Matveev - D2 Green G-10 - BF-765OD - knife
Intended Use: EDC / Sporting
Type of production: Industrial
Country of Production: China
Blade: tool steel D2 at 59/61HRC
Blade treatment: Stonewashed
Handle: G-10
Blade length: 93mm.
Blade thickness: 3.4mm.
Total length: 203mm.
Weight: 100g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Grigorii MatveevBF-765OD -
BlackFox - Acutus by Grigorii Matveev - D2 Black G-10 - BF-764BB - knife
Intended Use: EDC / Sporting
Production type: Industrial
Country of Production: China
Blade: D2 tool steel at 59/61HRC
Blade treatment: Black PTFE
Handle: G-10
Blade length: 90mm.
Blade thickness: 3.4mm.
Total length: 195mm.
Weight: 115g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Grigorii MatveevBF-764BB -
BlackFox - Nix by Grigorii Matveev - D2 Orange G-10 - BF-763OR - couteau
Usage prévu : EDC / Sport
Type de production : Industriel
Pays de production : Chine
Lame : Acier à outils D2 à 59/61HRC
Traitement de la lame : PTFE noir
Manche : G-10
Longueur de la lame : 55mm.
Epaisseur de la lame : 3.5mm.
Longueur totale : 132mm.
Poids : 90g.
Clip : Acier inoxydable, amovible et réversible
Fermeture : Liner Lock
Emballage : boîte en carton avec les logos BlackFox
Notes : Design par Grigorii MatveevBF-763OR -
BlackFox - Nix by Grigorii Matveev - D2 Brown Micarta - BF-763 - knife
Intended Use: EDC / Sporty
Type of production: Industrial
Country of Production: China
Blade: D2 tool steel at 59/61HRC
Blade treatment: Stonewashed
Handle: Micarta
Blade Length: 55mm.
Blade thickness: 3.5mm.
Total length: 132mm.
Weight: 90g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Grigorii MatveevBF-763 -
Pohl Force - Bravo Two Classic - FDE Dark Stonewashed ATS-34 - 1079 - knife
To celebrate Pohl Force's 15th anniversary, the popular Bravo One and Two Gen. 1 folding knife models are being reissued with a few minor updates.
From the very beginning, their compact size and shape made them ideal companions for everyday use. And that has not changed to this day. Like the Alpha Two X, on the occasion of the company's 10th anniversary, with the original handle design from the first generation. The new Classic Edition also features other details, such as the locking mechanism, the pocket clip that can be mounted on either the right or left side, and the two-handed blade opening.
It is not only the Pohl Force that is celebrating an anniversary, but also the designer and company founder Dietmar Pohl. In the early 1990s, now 30 years ago, he created his first knife designs on paper, thus opening a new chapter in his life. The Japanese steel manufacturer Hitachi's ATS-34, which is the counterpart to the American 154CM steel, was one of the most popular steels of the time. For almost a decade, ATS-34 steel remained the first choice of custom knife manufacturers, before powder metallurgy steel took off in the 2000s. To mark the company's anniversary, Dietmar Pohl was able to obtain 'his' steel again in a very limited quantity and use it for the Classic Edition of the Bravo One / Two. The highly corrosion-resistant ATS-34 impresses with its exceptional sharpness and high edge retention.
The Bravo Two Classic BK is equipped with an FDE (Flat Dark Earth) fibreglass handle and a Tanto blade with a Dark Stonewashed finish.
Intended use: Tactical, collection
Type of production: Industrial
Blade: Hitachi ATS-34 stainless steel
Blade finish: Dark Stonewashed
Handle: GRP (glass-reinforced polyester)
Blade length: 83mm.
Blade thickness: 3.5mm.
Total length: 195mm.
Thickness when closed: 14mm.
Weight: 120g.
Closure: Back Lock
Packaging: Cardboard box with Pohl Force logos
Notes: Numbered and with certificate of authenticity with signature and date of manufacturePF-1079FDE -
Pohl Force - Bravo One Classic - FDE Dark Stonewashed ATS-34 - 1077 - knife
To celebrate Pohl Force's 15th anniversary, the popular Bravo One and Two Gen. 1 folding knife models are being reissued with a few minor updates.
From the very beginning, their compact size and shape made them ideal companions for everyday use. And that has not changed to this day. Like the Alpha Two X, on the occasion of the company's 10th anniversary, with the original handle design from the first generation. The new Classic Edition also features other details, such as the locking mechanism, the pocket clip that can be mounted on either the right or left side, and the two-handed blade opening.
It is not only the Pohl Force that is celebrating an anniversary, but also the designer and company founder Dietmar Pohl. In the early 1990s, now 30 years ago, he created his first knife designs on paper, thus opening a new chapter in his life. The Japanese steel manufacturer Hitachi's ATS-34, which is the counterpart to the American 154CM steel, was one of the most popular steels of the time. For almost a decade, ATS-34 steel remained the first choice of custom knife manufacturers, before powder metallurgy steel took off in the 2000s. To mark the company's anniversary, Dietmar Pohl was able to obtain 'his' steel again in a very limited quantity and use it for the Classic Edition of the Bravo One / Two. The highly corrosion-resistant ATS-34 impresses with its exceptional sharpness and high edge retention.
The Bravo One Classic BK features an FDE (Flat Dark Earth) fibreglass handle and a Drop point blade with a Dark Stonewashed finish.
Intended use: Tactical, collection
Type of production: Industrial
Blade: Hitachi ATS-34 stainless steel
Blade finish: Dark Stonewashed
Handle: GRP (glass-reinforced polyester)
Blade length: 83mm.
Blade thickness: 3.5mm.
Total length: 195mm.
Thickness when closed: 14mm.
Weight: 120g.
Closure: Back Lock
Packaging: Cardboard box with Pohl Force logos
Notes: Numbered and with certificate of authenticity with signature and date of manufacturePF-1077FDE -
United Cutlery - Rambo 5 Heartstopper- Knife Replica From Last Blood - Fixed Blade
From the hit Lionsgate film "Rambo: Last Blood" comes this accurate replica of the Heartstopper tactical knife. It is an exact replica of the fully functional knife used in the film, from Sylvester Stallone's personal knife collection. United Cutlery, maker of the first licensed replica of the Rambo knife, created this version of the Heartstopper using only the highest quality materials and production methods, including precision CNC machining and finishing.
Intended Use: Collection
Production Type: Industrial
Country of manufacture: China
Blade: full tang in 7Cr17MoV stainless steel
Blade treatment: Dual Tone
Handle: Micarta
Blade length: 229mm.
Blade thickness: 6mm.
Total length: 381mm.
Balance: advanced
Weight: 790g.
Sheath: leather
Packaging: cardboard box with Rambo Last Blood logos.
Notes: original and official product, with film licenses Lions Gate Entertainment Inc.UC3461 -
BlackFox - Folding Rescue Knife - Red - BF-117 - knife
Intended Use: EDC / Rescue
Production type: Industrial
Country of manufacture: China
Blade: Steel 440 HRC 55-57
Blade treatment: satin finish
Handle: Aluminium T6-6082 anodised red
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 208mm.
Weight: 169g. (204g. including sheath)
Clip: -
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: glass breaker - 7, 8 and 10 mm bolt insert - oxygen cylinder opening insert - nylon sheathBF-117 -
BlackFox - Folding Rescue Knife - Black - BF-115 - knife
Intended Use: EDC / Rescue
Production type: Industrial
Country of manufacture: China
Blade: Steel 440 HRC 55-57
Blade treatment: varnishing
Handle: G10
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 208mm.
Weight: 162g. (197g. including scabbard)
Clip: -
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: glass breaker - 7, 8 and 10 mm bolt insert - oxygen cylinder opening insert - nylon sheathBF-115 -
BlackFox - Viator by Alfredo Doricchi - D2 Grey Micarta - BF-731D2MG - knife
Intended Use: Bushcraft / Outdoor
Type of production: Industrial
Country of Production: China
Blade: full tang in D2 carbon steel hardened to 58/60HRC
Blade treatment: Satin finish
Handle: Micarta
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 190mm.
Weight: 165g.
Sheath: made of Kydex, with Tek-Lok type attachment
Packaging: cardboard box with BlackFox logos
Notes: tinder box for lighting the fire included, to be inserted in the scabbard - Design by Alfredo DoricchiBF-731D2MG -
Zero Tolerance - ZT0006 - CPM-3V - OD Green G10 - fixed blade, single edge knife, Made in USA
Intended Use: Tactical / Sporting
Type of production: Industrial
Country of manufacture: USA
Blade: full tang in CPM-3V carbon steel
Blade treatment: Microbead blasting and Cerakote protective treatment
Handle: G10 OD Green with stainless steel through-guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex, with Nylon belt attachment system, removable
Packaging: cardboard box with Zero Tolerance logos.
Notes: -ZT0006 -
BlackFox - Argus by Grigorii Matveev - Zebrano Wood - BF-760W - knife
Intended Use: Sporting
Type of production: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: Satin finish
Handle: Zebrano wood
Blade length: 90mm.
Blade thickness: 3mm.
Total length: 202mm.
Weight: 70g.
Clip: stainless steel, removable
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Carson Flipper opening system - Design by Grigorii MatveevBF-760W -
BlackFox - Argus by Grigorii Matveev - Black G10 - BF-760 - knife
Intended Use: Sporting
Type of production: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: Blackwash
Handle: G10
Blade length: 90mm.
Blade thickness: 3mm.
Total length: 202mm.
Weight: 75g.
Clip: stainless steel, removable
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Carson Flipper opening system - Design by Grigorii MatveevBF-760 -
BlackFox - Feresa by Grigorii Matveev - Green - BF-762OD - knife
Intended Use: Sporting
Type of production: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: Blackwash
Handle: aluminum
Blade length: 83mm.
Blade thickness: 3mm.
Total length: 191mm.
Weight: 100g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Grigorii MatveevBF-762OD -
BlackFox - Feresa by Grigorii Matveev - Black - BF-762BB - knife
Intended Use: Sporting
Type of production: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: Blackwash
Handle: aluminum
Blade length: 83mm.
Blade thickness: 3mm.
Total length: 191mm.
Weight: 100g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Grigorii MatveevBF-762BB -
BlackFox - Puck by Grigorii Matveev - Red G10 - BF-761R - knife
Intended Use: EDC / Sporting
Production type: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: Blackwash
Handle: G10 with aluminum spacer
Blade length: 49mm.
Blade thickness: 3mm.
Total length: 107mm.
Weight: 70g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Carson Flipper type opening system - Design by Grigorii MatveevBF-761R -
BlackFox - Puck by Grigorii Matveev - OD Green G10 - BF-761OD - knife
Intended Use: EDC / Sporting
Production type: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: satin finish
Handle: G10 with aluminum spacer
Blade length: 49mm.
Blade thickness: 3mm.
Total length: 107mm.
Weight: 70g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Carson Flipper type opening system - Design by Grigorii MatveevBF-761OD -
BlackFox - Puck by Grigorii Matveev - Black G10 - BF-761B - knife
Intended Use: EDC / Sporty
Production type: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: satin finish
Handle: G10 with aluminum spacer
Blade length: 49mm.
Blade thickness: 3mm.
Total length: 107mm.
Weight: 70g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Carson Flipper type opening system - Design by Grigorii MatveevBF-761B -
Zero Tolerance - Tim Galyean - Copper - Factory Special Series - ZT0022CU - knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-20CV
Blade treatment: stone washed
Handle: Bronze and Titanium
Blade length: 49mm.
Blade thickness: 3.1mm.
Length closed: 76mm.
Total length: 122mm.
Thickness when closed: 11.1mm.
Weight: 80g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings via Carson Flipper system - Limited Edition "Factory Special Series"ZT0022CU -
BlackFox - Vesuvius knife Black - D2 - by Alfredo Doricchi - BF-710 - knife
Intended use: Bushcraft / Outdoor
Type of production: Industrial
Country of production: China
Blade: D2 steel
Blade Treatment: Stonewashed
Handle: Black G10 with removable orange paracord
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 220mm.
Weight: 239g.
Sheath: Kydex, with Tek-Lok attachment
Packaging: cardboard box with BlackFox logos
Notes: Fire starter included, to be inserted in the scabbard - Design by Alfredo DoricchiBF-710D2 -
BlackFox - Vesuvius knife - D2 - by Alfredo Doricchi - BF-710 OD - knife
Intended use: Bushcraft / Outdoor
Type of production: Industrial
Country of production: China
Blade: D2 steel
Blade treatment: Stonewashed
Handle: Black G10 with removable orange paracord
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 220mm.
Weight: 239g.
Sheath: in Kydex, with Tek-Lok type attachment
Packaging: cardboard box with BlackFox logos
Notes: Lock to light the fire included, to be inserted in the scabbard - Design by Alfredo DoricchiBF-710-OD-D2 -
BlackFox - Golem by Denis Simonutti - BF-757OD - knife
Intended Use: Bushcraft / Outdoor
Production type: Industrial
Country of Production: China
Blade: Full tang in D2 59/61HRC steel
Blade Finish: Stonewashed
Handle: G10
Blade length: 140mm.
Blade thickness: 5mm.
Total length: 270mm.
Weight: 290g.
Sheath: kydex, with Tek-Lok type attachment
Packaging: cardboard box with BlackFox logos
Notes: Design by Denis SimonuttiBF-757OD -
BlackFox - Lynx by Denis Simonutti - BF-756OD - knife
Intended Use: Bushcraft / Outdoor
Production type: Industrial
Country of Production: China
Blade: Full tang in D2 59/61HRC steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 110mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 180g.
Sheath: kydex, with Tek-Lok type attachment
Packaging: cardboard box with BlackFox logos
Notes: Design by Denis SimonuttiBF-756OD -
BlackFox - Nu-Bowie by Kean Alfaro - Green Micarta - BF-758MI - folding knife
Intended Use: Sporting
Type of production: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: stonewashed
Handle: micarta
Blade length: 65mm.
Blade thickness: 3mm.
Total length: 148mm.
Weight: 80g.
Clip: stainless steel, removable and reversible, deep pocket type
Closure: Button Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Kean AlfaroBF-758MI -
BlackFox - Nu-Bowie by Kean Alfaro - Black G10 - BF-758 - folding knife
Intended Use: Sporting
Type of production: Industrial
Country of Production: China
Blade: D2 steel
Blade finish: black coating
Handle: G10
Blade length: 65mm.
Blade thickness: 3mm.
Total length: 148mm.
Weight: 80g.
Locking system: Button Lock
Clip: stainless steel, removable and reversible, deep pocket type
Packaging: cardboard box with BlackFox logos
Notes: Design by Kean AlfaroBF-758 -
Pohl Force - Charlie Three SW - D2 steel - 6011 - knife
With the new Charlie generation, designer Dietmar Pohl continues the successful series of minimalist and extremely durable knives. Whether for everyday use or as an ultra-flat reserve knife for outdoor activities, the new Charlie Three covers a wide range of applications.
The modern Spear Point blade and handle of the Charlie Three are made of 6-millimeter thick D2 tool steel, which gives the knife a level of strength and edge retention. The Stonewashed finish creates a scratch-resistant surface and increases the blade's corrosion resistance.
Using CNC technology, all details are elaborately milled on the handle specially designed for the new Charlie series. The rounded tang and grooved areas for the index finger and thumb ensure a comfortable and secure grip.
The Charlie Three BK comes with a sturdy, high-quality black Kydex sheath. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and secure carrying.
Intended Use: Tactical/SportingBlade: Full tang made of D2 steel at 59/60HRC with Stonewashed finish
Handle: -
Blade length: 95mm.
Blade thickness: 6mm.
Total length: 210mm.
Weight: 152g.
Sheath: kydex, with Tac-Clip (Tek-Lok type) multi-position attachment
Packaging: cardboard box with Pohl Force logos, Certificate of authenticity numbered and signedPF-6011 -
BlackFox - Lollypop Fixed by Tommaso Rumici - BF-755 - coltello
Destinazione d'uso: Outdoor / Utility / EDC
Tipo di produzione: Industriale
Paese di produzione: China
Lama: Acciaio Inox 440C
Trattamento lama: Blackwashed
Manicatura: G-10
Lunghezza lama: 55mm.
Spessore lama: 3.5mm.
Lunghezza totale: 115mm.
Peso: 71g.
Fodero: in Kydex, con clip in acciaio inox
Confezione: scatola in cartone con loghi BlackFox
Note: Design by Tommaso RumiciBF-755 -
BlackFox - Plan B Rescue Tool by Tommaso Rumici - BF-754 - knife
Intended Use: Rescue Tool / Utility
Production type: Industrial
Country of Production: China
Blade: Stainless Steel 440C
Blade Treatment: Blackwashed
Handle: G-10
Blade Length: 45mm.
Blade thickness: 3.5mm.
Total lenght: 115mm.
Weight: 80g.
Sheath: Kydex, with stainless steel clip.
Package: cardboard box with BlackFox logos
Notes: Design by Tommaso RumiciBF-754 -
BlackFox - Arrow Fixed by Tommaso Rumici - BF-753 - knife
Intended Use: EDC / Utility / Tactical/
Production type: Industrial
Country of Production: China
Blade: Stainless Steel 440C
Blade Treatment: Blackwashed
Handle: G-10
Blade Length: 55mm.
Blade thickness: 3.5mm.
Total lenght: 115mm.
Weight: 71g.
Sheath: Kydex, with stainless steel clip.
Package: cardboard box with BlackFox logos
Notes: Design by Tommaso RumiciBF-753 -
Pohl Force - Compact Two BK TiNi - D2 steel - 6032 - knife
With the new Compact models, designer Dietmar Pohl has developed a series of extremely robust and very compact knives for everyday use.
The focus is on the massive classic Drop Point blade of the Compact Two, which is 86 millimeters long and designed to be enormously solid with a thickness of 6 mm. The well-known D2 tool steel was chosen for the blade's high cutting strength and resilience. The surface of the blade has a tactical, non-reflective TiNi titanium nitriding coating that provides excellent protection against external corrosives.
The reduced handle design is the basis for the knife's very compact size. The pleasantly rounded tang and cleverly designed finger recesses, in combination with the G-10 handle grips, which are also CNC milled, provide a good, secure grip. Distinctive grooves in the front area of the grip serve as an index finger and thumb rest.
The Compact TWO BK is equipped with a robust, high-quality Kydex sheath in black. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and safe carrying.
Intended use: Tactical / SportingBlade: Full tang in D2 steel at 59/60HRC with TiNi coating
Handle: In G-10
Blade length: 86mm.
Blade thickness: 6mm.
Total length: 170mm.
Weight: 165g.
Sheath: In kydex, with Tac-Clip attachments (Tek-Lok type).
Package: Cardboard box with Pohl Force logos, signed and numbered Certificate of Authenticity.PF-6032 -
Pohl Force - Compact Two SW - D2 steel - 6031 - knife
With the new Compact models, designer Dietmar Pohl has developed a series of extremely robust and very compact knives for everyday use.
The focus is on the massive classic Drop Point blade of the Compact Two, which is 86 millimeters long and designed to be enormously solid with a thickness of 6 mm. The well-known D2 tool steel was chosen for the blade's high cutting strength and resilience. The stonewashed finish creates a scratch-resistant surface and also increases the blade's resistance to corrosion.
The reduced handle design is the basis for the knife's very compact size. The nicely rounded tang and expertly designed finger recesses, in combination with the G-10 handle grips, which are also CNC milled, provide a good, secure grip. Distinctive grooves in the front area of the grip serve as an index finger and thumb rest.
The Compact Two SW is equipped with a robust, high-quality Kydex sheath in FDE (Flat Dark Earth) color. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and safe carrying.
Intended use: Tactical / SportingBlade: Full tang in D2 steel at 59/60HRC
Handle: In G-10
Blade length: 86mm.
Blade thickness: 6mm.
Total length: 170mm.
Weight: 165g.
Sheath: In kydex, with Tac-Clip attachments (Tek-Lok type).
Package: Cardboard box with Pohl Force logos, signed and numbered Certificate of Authenticity.PF-6031 -
Pohl Force - Compact One SW - D2 steel - 6021 - knife
With the new Compact models, designer Dietmar Pohl has developed a series of extremely robust and very compact knives for everyday use.
The focus is on the massive, classic Bowie blade of the Compact One, which is 88 millimeters long and designed to be enormously solid with a thickness of 6 mm. The well-known D2 tool steel was chosen for the blade's high cutting strength and resilience. The stonewashed finish creates a scratch-resistant surface and also increases the blade's resistance to corrosion.
The reduced handle design is the basis for the knife's very compact size. The nicely rounded tang and expertly designed finger recesses, in combination with the G-10 handle grips, which are also CNC milled, provide a good, secure grip. Distinctive grooves in the front area of the grip serve as an index finger and thumb rest.
The Compact One SW is equipped with a robust, high-quality Kydex sheath in FDE (Flat Dark Earth) color. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and safe carrying.
Intended use: Tactical / SportingBlade: Full tang in D2 steel at 59/60HRC
Handle: In G-10
Blade length: 88mm.
Blade thickness: 6mm.
Total length: 170mm.
Weight: 165g.
Sheath: In kydex, with Tac-Clip attachments (Tek-Lok type).
Package: Cardboard box with Pohl Force logos, signed and numbered Certificate of Authenticity.PF-6021 -
Zero Tolerance - ZT0990 knife - CPM 20CV - Carbon Fiber - knife
Based on the award-winning ZT 0999, the 0990 simplifies this legendary design. Despite the skeletonized structure, this ZT is reliable and robust thanks to the steel structure.
Intended use: Sports / Tactical / Collection
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber and steel
Blade length: 83mm.
Blade thickness: 3mm.
Closed length: 114mm.
Total length: 193mm.
Thick when closed: 114mm.
Weight: 82g.
Closure: liner lock
Clip: Removable, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: flipper opening system on ball bearings - Manual KVT ball bearingsZT0990 -
Zero Tolerance - ZT0762 knife - CPM 20CV - Carbon Fiber - knife
Intended use: Sports / Tactical / Collection
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Black carbon fiber with aluminum spacers
Blade length: 86mm.
Blade thickness: 3mm.
Closed length: 126mm.
Total length: 206mm.
Thick when closed: 112mm.
Weight: 82g.
Closure: Sub Framelock in hardened steel
Clip: Removable, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: Tuned Detent System (TDS ™) opening systemZT0762 -
BlackFox - B-Key - EDC Pocket Knife - OD Green - BF-750OD - knife
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: 440A steel HRC 57-59
Blade treatment: stone washed
Handle: Anodized aluminum with 420J2B stainless steel liner
Blade length: 45mm.
Blade thickness: 4mm.
Total length: 105mm.
Weight: 70g.
Clip: Stainless steel 420J2B, removable
Closure: Frame Lock
Packaging: Cardboard box with BlackFox logos
Notes: -BF-750OD -
BlackFox - B-Key - EDC Pocket Knife - Blue - BF-750BL - knife
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: 440A steel HRC 57-59
Blade treatment: stone washed
Handle: Anodized aluminum with 420J2B stainless steel liner
Blade length: 45mm.
Blade thickness: 4mm.
Total length: 105mm.
Weight: 70g.
Clip: Stainless steel 420J2B, removable
Closure: Frame Lock
Packaging: Cardboard box with BlackFox logos
Notes: -BF-750BL -
BlackFox - B-Key - EDC Pocket Knife - Black - BF-750 - knife
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: 440A steel HRC 57-59
Blade treatment: stone washed
Handle: Anodized aluminum with 420J2B stainless steel liner
Blade length: 45mm.
Blade thickness: 4mm.
Total length: 105mm.
Weight: 70g.
Clip: Stainless steel 420J2B, removable
Closure: Frame Lock
Packaging: Cardboard box with BlackFox logos
Notes: -BF-750 -
United Cutlery - M48 Conflict Cleaver - UC3425 - knife
Intended Use: Tactical / Military
Production Type: Industrial
Country of Production: China
Blade: Full tang in 2Cr13 stainless steel
Blade finish: Dual Tone: satin with black finishing
Handle: FRN (Fiberglass and Nylon)
Blade length: 158mm.
Blade thickness: 8mm.
Total length: 286mm.
Weight: 760g.
Sheath: Belt, for vertical carrying, made of polymer (Vortec) and nylon.
Package: Cardboard box with United Cutlery logos.
Notes: -UC3425 -
BlackFox - Pocket knife EDC - Black G10 - BF-752 - folding knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: Steel 440C HRC 57-59
Blade treatment: stone washed
Handle: G10 with stainless steel frame lock
Blade length: 50mm.
Blade thickness: 3mm.
Total lenght: 115mm.
Weight: 70g.
Clip: Stainless steel, removable
Closure: FrameLock
Package: Cardboard box with BlackFox logos
Notes: -BF-752 -
BlackFox - Explorator by Alfredo Doricchi - BF-749 - knife
Intended Use: Bushcraft / Outdoor
Production type: Industrial
Country of Production: China
Blade: Stainless Steel 440C HRC 57-59
Blade Treatment: Stonewashed
Handle: Micarta
Blade Length: 100mm.
Blade thickness: 4mm.
Total lenght: 220mm.
Weight: 180g.
Sheath: Kydex, with Tek-Lok type fitting
Package: Cardboard box with BlackFox logos.
Notes: Tinderbox to light the fire to be inserted in the sheath - Design by Alfredo DoricchiBF-749 -
BlackFox - Pocket knife EDC - OD Green G10 - BF-752OD - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: Steel 440C HRC 57-59
Blade treatment: stone washed
Handle: G10 with stainless steel frame lock
Blade length: 50mm.
Blade thickness: 3mm.
Total lenght: 115mm.
Weight: 70g.
Clip: Stainless steel, removable
Closure: FrameLock
Package: Cardboard box with BlackFox logos
Notes: -BF-752OD -
BlackFox - Revolver Flipper Knife - Green Micarta - BF-740OD - folding knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: D2 carbon steel
Blade treatment: satin finish
Handle: OD Green micarta with stainless steel liners
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 215mm.
Weight: 118g.
Clip: stainless steel, removable
Closure: Liner Lock
Package: cardboard box with BlackFox logos
Notes: -BF-740OD -
Zero Tolerance - Coyote Flipper Frame Lock - Titanium - ZT0308 - Knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: BlackWash
Handle: Titanium and G10
Blade length: 95mm.
Blade thickness: 4mm.
Closed length: 132mm.
Total length: 241mm.
Weight: 196g.
Closing system: Frame Lock
Clip: removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Note: -ZT0308BLKTS -
Zero Tolerance - Flipper Frame Lock - Carbon Fiber - ZT0707 - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Stonewashed
Handle: Titanium and Carbon Fiber
Blade length: 89mm.
Blade thickness: 3.1mm.
Length closed: 117mm.
Total length: 210mm.
Weight: 68g.
Closing system: Frame Lock
Clip: removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Notes: New Tuned Detent System (TDS) which allows easy knife opening, even by exerting pressure on the titanium frame lockZT0707 -
Zero Tolerance - ZT0235 - Jens Anso - Carbon Fiber SlipJoint - knife
Intended use: EDC / Gentleman
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber with anodized aluminum spacer and stainless steel folders
Blade length: 66mm.
Blade thickness: 3mm.
Length closed: 94mm.
Total length: 157mm.
Thick when closed: 10mm
Weight: 51g.
Closure: SlipJoint
Clip: -
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Jens AnsoZT0235 -
Zero Tolerance - SpeedSafe Flipper - BlackWash - ZT0357BW - knife
Intended use: Sports
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV 60 / 62HRC stainless steel
Blade finish: BlackWash
Handle: G-10
Blade length: 82.5mm.
Blade thickness: 3.1mm.
Length closed: 112mm.
Total length: 194mm.
Thick when closed: 11.2mm.
Weight: 122g.
Closing: Liner Lock
Clip: Removable and reversible in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe quick opening via Carson Flipper systemZT0357BW -
Zero Tolerance - SpeedSafe Flipper - Stone Washed - ZT0357 - knife
Intended use: Sports
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV 60 / 62HRC stainless steel
Blade finish: Stone Washed
Handle: G-10
Blade length: 82.5mm.
Blade thickness: 3.1mm.
Length closed: 112mm.
Total length: 194mm.
Thick when closed: 11.2mm.
Weight: 122g.
Closing: Liner Lock
Clip: Removable and reversible in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe quick opening via Carson Flipper systemZT0357 -
United Cutlery - M48 Highland Sgian Dubh - UC3154 - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: China
Blade: 2Cr13 stainless steel
Blade finish: Dual Tone: satin with black finishes
Handle: TPR (Thermoplastic Rubber)
Blade length: 133mm.
Blade thickness: 7mm.
Total length: 241mm.
Weight: 184g.
Sheath: belt, for vertical port, in TPU (Thermoplastic Polyurethane)
Packaging: Cardboard box with United Cutlery logos
Note: -UC3154 -
Zero Tolerance - Coyote Flipper Frame Lock - Titanium - ZT0308 - Knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Stonewashed
Handle: Titanium and G10
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 132mm.
Total length: 241mm.
Weight: 196g.
Closing system: Frame Lock
Clip: removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Note: -ZT0308 -
Zero Tolerance - ZT0230 - Jens Anso - Carbon Fiber SlipJoint - knife
Intended use: EDC / Gentleman
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber with anodized aluminum spacer and stainless steel folders
Blade length: 66mm.
Blade thickness: 3mm.
Length closed: 94mm.
Total length: 157mm.
Thick when closed: 10mm
Weight: 51g.
Closure: SlipJoint
Clip: -
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Jens AnsoZT0230 -
BlackFox - Evolution Axe by Peter Fegan - BF-735 - tomahawk
Intended use: Tactical / Sports
Type of production: Industrial
Country of production: China
Blade: 440A stainless steel
Blade treatment: blackwashed
Handle: G-10
Blade length: 70mm.
Blade thickness: 6.5mm.
Total length: 288mm.
Weight: 550g.
Sheath: in Kydex, with Tek-Lok type connection
Packaging: Cardboard box with BlackFox logos
Notes: Design by Peter FeganBF-735 -
Zero Tolerance - Tim Galyean knife - Flipper Carbon Fiber - ZT0022 - knife
Intended use: Sports / Collection
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: stone washed
Handle: Carbon Fiber and Titanium with anodized spacers
Blade length: 49mm.
Blade thickness: 3.1mm.
Length closed: 76mm.
Total length: 122mm.
Thick when closed: 11.1mm.
Weight: 50g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings using the Carson Flipper systemZT0022 -
Zero Tolerance - Hinderer Slicer Frame Lock - Carbon Fiber - ZT0562CF - knife
Intended use: Tactical / Military
Type of production: Industrial
Production Lama USA
Blade: Stainless steel Elmax
Treatment Blade: Stonewashed
Handle: Stainless Steel and CTS-204P
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 113mm.
Overall length: 206mm.
Thick when closed: 12mm.
Balancing: -
Weight: 160g.
Closure: Frame Lock
Clip: Removable, Multi position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rick Hinderer - KVT Ball Bearing SystemZT0562CF -
Zero Tolerance - Sinkevich Folder Titanium - ZT0450 - knife
The original Zero Tolerance 0454 was an award-winning collaboration between ZT and custom knife designer Dmitry Sinkevich. But it was also a very Limited Edition knife.
So ZT is doing something about that with the new 0450. While based on the original’s streamlined form and high-performance function, this new and more compact version will be much more readily available. With its 3.25-inch blade and lightweight-yet-stronger-than-steel titanium handles, the 0450 has a sleek and sophisticated look that, we think, makes it a perfect EDC.
ZT built it with an S35VN stainless blade that sharpens to a razor edge, holds it well, and can be resharpened easily. The knife opens smoothly and easily with the KVT ball-bearing opening system and built-in flipper. A titanium frame lock with hardened steel lockbar insert ensures solid lock up. Polished pivot hardware just adds to the 0450's refined good looks.
Sinkevich Folder Titanium - ZT0450 - knife
Intended use: Sport / Collection
Type of production: Industrial
Production Lama USA
Blade: Stainless steel CPMS35 59 / 61HRC
Treatment Lama: -
Handle: Titanium
Blade length: 82mm.
Blade thickness: 3mm.
Length closed: 111mm.
Overall length: 187mm.
Thick when closed: -
Balancing: -
Weight: 84g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Dmitry Sinkevich - Opening KVT ball-bearingZT450 -
Zero Tolerance - Carbon Fiber Flipper Folder - ZT0770CF - knife
Intended use: Tactical / Military
Type of production: Industrial
Production Country: USA
Blade: Stainless Steel CPM-S35VN 59/61HRC
Treatment Llama: Stonewashed
Handle: Carbon Fibre
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 108mm.
Overall length: 190mm.
Thick when closed: 13mm.
Balancing: -
Weight: 85g.
Lock: Liner Lock
Clip: Removable and multi-position, stainless steel
Packaging: cardboard box with logos Zero Tolerance
Note: Opening system SpeedsafeZT0770CF -
United - M48 Zombie Apocalypse Axe - UC2946 - Tomahawk
This M48 Apocalypse tactical tomahawk is the ultimate tactical weapon. It is lightweight to be carried all day without added muscle fatigue and the blade of this offers a wide, upswept axe blade for mammoth chopping, slashing and zombie cutting potential. The secondary edge on the back side of the head is specially sharpened on both edges for a cutting and hooking attack. When combined, the spike and axe head make for an efficient personal defense and breaching tool against the zombie horde. The blade is securely attached to the paracord-wrapped, 30% nylon reinforced handle with three separate bolts. Includes a durable nylon belt sheath with belt loop and snap closure buttons. 8" bl, 15" overall10850 -
Pohl Force - Bravo Two Classic - Black Two Tone ATS-34 - 1078 - knife
To celebrate Pohl Force's 15th anniversary, the popular Bravo One and Two Gen. 1 folding knife models are being reissued with a few minor updates.
From the very beginning, their compact size and shape made them ideal companions for everyday use. And that has not changed to this day. Like the Alpha Two X, on the occasion of the company's 10th anniversary, with the original handle design from the first generation. The new Classic Edition also features other details, such as the locking mechanism, the pocket clip that can be mounted on either the right or left side, and the two-handed blade opening.
It is not only the Pohl Force that is celebrating an anniversary, but also the designer and company founder Dietmar Pohl. In the early 1990s, now 30 years ago, he created his first knife designs on paper, thus opening a new chapter in his life. The Japanese steel manufacturer Hitachi's ATS-34, which is the counterpart to the American 154CM steel, was one of the most popular steels of the time. For almost a decade, ATS-34 steel remained the first choice of custom knife manufacturers, before powder metallurgy steel took off in the 2000s. To mark the company's anniversary, Dietmar Pohl was able to obtain 'his' steel again in a very limited quantity and use it for the Classic Edition of the Bravo One / Two. The highly corrosion-resistant ATS-34 impresses with its exceptional sharpness and high edge retention.
The Bravo Two Classic BK is equipped with a black fibreglass handle and a Tanto blade with an exciting two-tone finish (stonewashed/satin-finished lengthwise).
Intended use: Tactical, collection
Type of production: Industrial
Blade: Hitachi ATS-34 stainless steel
Blade finish: Dual Tone (stonewashed + satin-finished)
Handle: GRP (glass-reinforced polyester)
Blade length: 83mm.
Blade thickness: 3.5mm.
Total length: 195mm.
Thickness when closed: 14mm.
Weight: 120g.
Closure: Back Lock
Packaging: Cardboard box with Pohl Force logos
Notes: Numbered and with certificate of authenticity with signature and date of manufacturePF-1078BK -
Pohl Force - Bravo One Classic - Black Two Tone ATS-34 - 1076 - knife
To celebrate Pohl Force's 15th anniversary, the popular Bravo One and Two Gen. 1 folding knife models are being reissued with a few minor updates.
From the very beginning, their compact size and shape made them ideal companions for everyday use. And that has not changed to this day. Like the Alpha Two X, on the occasion of the company's 10th anniversary, with the original handle design from the first generation. The new Classic Edition also features other details, such as the locking mechanism, the pocket clip that can be mounted on either the right or left side, and the two-handed blade opening.
It is not only the Pohl Force that is celebrating an anniversary, but also the designer and company founder Dietmar Pohl. In the early 1990s, now 30 years ago, he created his first knife designs on paper, thus opening a new chapter in his life. The Japanese steel manufacturer Hitachi's ATS-34, which is the counterpart to the American 154CM steel, was one of the most popular steels of the time. For almost a decade, ATS-34 steel remained the first choice of custom knife manufacturers, before powder metallurgy steel took off in the 2000s. To mark the company's anniversary, Dietmar Pohl was able to obtain 'his' steel again in a very limited quantity and use it for the Classic Edition of the Bravo One / Two. The highly corrosion-resistant ATS-34 impresses with its exceptional sharpness and high edge retention.
The Bravo One Classic BK is equipped with a black fibreglass handle and a drop point blade with an exciting two-tone finish (stonewashed/longitudinal satin finish).
Intended use: Tactical, collection
Type of production: Industrial
Blade: Hitachi ATS-34 stainless steel
Blade finish: Dual Tone (stonewashed + satin-finished)
Handle: GRP (glass-reinforced polyester)
Blade length: 83mm.
Blade thickness: 3.5mm.
Total length: 195mm.
Thickness when closed: 14mm.
Weight: 120g.
Closure: Back Lock
Packaging: Cardboard box with Pohl Force logos
Notes: Numbered and with certificate of authenticity with signature and date of manufacturePF-1076BK -
Pohl Force - Quebec Two Black TiNi - Limited Signature Edition - 2444S - knife
Pohl Force's Quebec series is a classic mission knife that has been at the top of founder and designer Dietmar Pohl's wish list for many decades. In 2014, Pohl Force received exclusive permission from the original manufacturer to use the basic design for its interpretation.
Developed as the Ground Forces Combat & General Purpose Weapon, the multi-purpose knife was designed for the U.S. Marine Corps in the early 1950s. Although it was never officially introduced, it clearly demonstrated its capabilities in the Vietnam War, especially in the hands of American special forces. Almost 70 years after its first design, the modern Pohl Force interpretation of this classic represents the perfect fusion of old-school classic design and modern high-tech production.
Designer Dietmar Pohl has revised the design of the Quebec One and expanded the knife's range of functions. The blade of the new Quebec Two is now made of D2 steel instead of Sleipner, which brings higher levels of carbon and chromium, thus significantly improving cut and corrosion resistance. In addition, Dietmar Pohl has once again optimized the blade of the classic. The new version now has a 10 mm longer cutting edge and a secondary edge on the back.
In addition, the Pohl Force Prepper System has been integrated into the handle of the Quebec Two to safely store survival items inside the handle. A tool to open the handle screws is included. Pohl Force's new scabbard system allows for greatly increased use. The highly elaborate sheath, made of 2.5-mm-thick Kydex, with belt adapter and leg strap, allows for high carrying comfort. To attach it to the hand, the Quebec Two is equipped with a lanyard.
Total length: 315 millimeters
Blade length: 190 millimeters
Blade thickness: 6 mm
Weight: 380g
Blade material: D2 steel
Blade finish: titanium nitriding
Handle material: G-10
Handle thickness: 24 mm
Sheath: 2.5mm thick Kydex with Cordura belt hooks, removable
Accessories included: Lanyard
Packaging: Cardboard box, warranty certificate
Notes: Each knife is numbered and individually signed by DIetmar Pohl on the Kydex sheathPF2444S -
Pohl Force - Quebec Two Stonewashed - Limited Signature Edition - 2443S - knife
Pohl Force's Quebec series is a classic mission knife that has been at the top of founder and designer Dietmar Pohl's wish list for many decades. In 2014, Pohl Force received exclusive permission from the original manufacturer to use the basic design for its interpretation.
Developed as the Ground Forces Combat & General Purpose Weapon, the multi-purpose knife was designed for the U.S. Marine Corps in the early 1950s. Although it was never officially introduced, it clearly demonstrated its capabilities in the Vietnam War, especially in the hands of American special forces. Almost 70 years after its first design, the modern Pohl Force interpretation of this classic represents the perfect fusion of old-school classic design and modern high-tech production.
Designer Dietmar Pohl has revised the design of the Quebec One and expanded the knife's range of functions. The blade of the new Quebec Two is now made of D2 steel instead of Sleipner, which brings higher levels of carbon and chromium, thus significantly improving cut and corrosion resistance. In addition, Dietmar Pohl has once again optimized the blade of the classic. The new version now has a 10 mm longer cutting edge and a secondary edge on the back.
In addition, the Pohl Force Prepper System has been integrated into the handle of the Quebec Two to safely store survival items inside the handle. A tool to open the handle screws is included. Pohl Force's new scabbard system allows for greatly increased use. The highly elaborate sheath, made of 2.5-mm-thick Kydex, with belt adapter and leg strap, allows for high carrying comfort. To attach it to the hand, the Quebec Two is equipped with a lanyard.
Total length: 315 millimeters
Blade length: 190 millimeters
Blade thickness: 6 mm
Weight: 380g
Blade material: D2 steel
Blade finish: stonewashed
Handle material: G-10
Handle thickness: 24 mm
Sheath: 2.5mm thick Kydex with Cordura belt hooks, removable
Accessories included: Lanyard
Packaging: Cardboard box, warranty certificate
Notes: Each knife is numbered and individually signed by DIetmar Pohl on the Kydex sheathPF2443S -
Zero Tolerance - Sinkevich - S35VN Red Blackwash - Factory Special Series - ZT0452RDBW - knife
Intended Use: Tactical/Military
Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S35VN
Blade treatment: Blackwash
Handle: Titanium Blackwash and Carbon Fiber Red and Black
Blade Length: 104mm.
Blade thickness: 4mm.
Length closed: 131mm.
Total length: 235mm.
Thickness when closed: 13mm.
Weight: 125g.
Closure: Frame Lock
Clip: stainless steel, removable and multi-position
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT opening on ball bearings - Opening via Carson Flipper system - Limited Edition "Factory Special Series"ZT0452RDBW -
Zero Tolerance - Sinkevich - 20CV Red Blackwash - Factory Special Series - ZT0460RDBW - knife
Intended Use: Sporting/Tactical
Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-20CV
Blade treatment: Blackwash
Handle: Carbon fiber and Titanium Blackwash
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 191mm.
Weight: 65g.
Closure: Framelock
Clip: Removable, stainless steel
Notes: KVT opening on ball bearings - Carson Flipper opening system - Design by Sinkevich - Limited Edition "Factory Special Series"ZT0460RDBW -
Zero Tolerance - Sinkevich knife Flipper Titanium - ZT0456 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Commercially available: discontinued
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: original ZT box
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory Coltelleria ColliniIntended use: Sports / Collection
Type of production: Industrial
Production Lama: USA
Blade: CTS-204P stainless steel
Blade treatment: stone washed and satin finish
Handle: Titanium with anodized spacers
Blade length: 87mm.
Blade thickness: 4mm.
Closed length: 112mm.
Total length: 193mm.
Thick when closed: 14mm.
Weight: 178g.
Closure: Framelock
Clip: Removable, reversible, in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmirty Sinkevich - KVT opening on ball bearingsAP-ZT0456-2 -
BlackFox - Nu-Bowie by Kean Alfaro - Brown Micarta - BF-758MIB - folding knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: stonewashed
Handle: micarta
Blade length: 65mm.
Blade thickness: 3mm.
Total length: 148mm.
Weight: 80g.
Clip: stainless steel, removable and reversible, deep pocket type
Closure: Button Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Kean AlfaroBF-758MIB -
Pohl Force - Charlie Two SW - D2 steel - 6001 - knife
With the new Charlie generation, designer Dietmar Pohl continues the successful series of minimalist and extremely durable knives. Whether for everyday use or as an ultra-flat reserve knife for outdoor activities, the new Charlie Two covers a wide range of applications.
The modern Spear Point blade and handle of the Charlie Two are made of 6-millimeter thick D2 tool steel, which gives the knife a level of strength and edge retention. The Stonewashed finish creates a scratch-resistant surface and increases the blade's corrosion resistance.
Using CNC technology, all details are elaborately milled on the handle specially designed for the new Charlie series. The rounded tang and grooved areas for the index finger and thumb ensure a comfortable and secure grip.
The Charlie Two comes with a sturdy, high-quality black Kydex sheath. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and secure carrying.
Intended Use: Tactical/SportingBlade: Full tang made of D2 steel at 59/60HRC with Stonewashed finish
Handle: -
Blade length: 95mm.
Blade thickness: 6mm.
Total length: 210mm.
Weight: 152g.
Sheath: made of kydex, with Tac-Clip (Tek-Lok type) multi-position attachment
Packaging: cardboard box with Pohl Force logos, Certificate of authenticity numbered and signedPF-6001 -
Pohl Force - Charlie Two BK TiNi - D2 steel - 6002 - knife
With the new Charlie generation, designer Dietmar Pohl continues the successful series of minimalist and extremely durable knives. Whether for everyday use or as an ultra-flat reserve knife for outdoor activities, the new Charlie Two covers a wide range of applications.
The modern Spear Point blade and handle of the Charlie Two are made of 6-millimeter thick D2 tool steel, which gives the knife a level of strength and edge retention. The surface of the handle and blade is coated with a black titanium nitriding.
Using CNC technology, all details are elaborately milled on the handle specially designed for the new Charlie series. The rounded tang and grooved areas for the index finger and thumb ensure a comfortable and secure grip.
The Charlie Two BK comes with a sturdy, high-quality black Kydex sheath. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and secure carrying.
Intended Use: Tactical/SportingBlade: Full tang made of D2 steel at 59/60HRC with TiNi coating
Handle: -
Blade length: 95mm.
Blade thickness: 6mm.
Total length: 210mm.
Weight: 152g.
Sheath: kydex, with Tac-Clip (Tek-Lok type) multi-position attachment
Packaging: cardboard box with Pohl Force logos, Certificate of authenticity numbered and signedPF-6002 -
Pohl Force - Charlie Three BK TiNi - D2 steel - 6012 - knife
With the new Charlie generation, designer Dietmar Pohl continues the successful series of minimalist and extremely durable knives. Whether for everyday use or as an ultra-flat reserve knife for outdoor activities, the new Charlie Three covers a wide range of applications.
The modern Spear Point blade and handle of the Charlie Three are made of 6-millimeter thick D2 tool steel, which gives the knife a level of strength and edge retention. The surface of the handle and blade is coated with a black titanium nitriding.
Using CNC technology, all details are elaborately milled on the handle specially designed for the new Charlie series. The rounded tang and grooved areas for the index finger and thumb ensure a comfortable and secure grip.
The Charlie Three BK comes with a sturdy, high-quality black Kydex sheath. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and secure carrying.
Intended Use: Tactical/SportingBlade: Full tang made of D2 steel at 59/60HRC with TiNi coating
Handle: -
Blade length: 95mm.
Blade thickness: 6mm.
Total length: 210mm.
Weight: 152g.
Sheath: kydex, with Tac-Clip (Tek-Lok type) multi-position attachment
Packaging: cardboard box with Pohl Force logos, Certificate of authenticity numbered and signedPF-6012