Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Helle Norway - Utvaer knife by Vox - PRIVATE COLLECTION - No.600 - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In good condition
* Commercially available: YES
* Sharpening: re-sharpened by our in-house laboratory
* Marks on blade: YES, has a number of scratches on the blade
* Marks on handle: None
* Box: Present and complete
* Sheath: Leather sheath
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our internal laboratoryIntended use: hunting/hiking
Type of production: semi-artisanal
Blade: 12C27 stainless steel
Handle: Birch
Blade length: 102mm.
Blade thickness: 3mm.
Total length: 221mm.
Balancing: set back 2.5cm
Weight: 151g.
Sheath: leather
Notes: Design by Jesper VoxnaesAP-HE-600 -
Helle Norway - Utvaer by Vox - No.600 - knife
Destination: hunting / hiking
Type of production: semi-handicraft
Country of production: Norway
Blade: 12C27 stainless steel
Finishing: mirror polishing
Handle: Birch wood
Blade Length: 102mm.
Blade thickness: 3mm.
Total length: 221mm.
Balance: back to 2.5cm
Weight: 151g.
Sheath: leather
Notes: Design by Jesper VoxnaesHE-600 -
Helle Norway - Les Stroud Temagami Knife - Knife - No.301
Helle Norway - Les Stroud Temagami Knife - Knife - No.301
Intended use: huntingType of production: semi-artisan
Blade: carbon steel laminate shirogami with sharp steel 62HRC
Handle: Birch
Blade length: 110mm.
Blade Thickness: 3mm.
Overall length: 230mm.
Balancing: back to 2.5cm
Weight: 154g.
Sheath: Leather
More information: http://www.lesstroud.ca/HE-301 -
Helle Norway - Jegermester - No.42 knife
Intended Use: Hunting
Type of production: industrial
Blade: stainless steel Sandvik 12C27
Treatment Lama: -
Handle: Birch
Blade length: 135mm.
Blade Thickness: 2.5mm.
Length closed: -
Total length: 250mm.
Balance: back to 2.5cm
Weight: 128g.
Closing: -
Clip: -
Sheath: Leather
Notes: -HE-42 -
Helle Norway - Temagami Les Stroud Knife - coltello - No. 1300
Les Stroud was born in Mimico - Ontario in 1961.
Canadian musician, filmmaker and survival expert, Les Stroud is best known as the creator, writer, producer, director, cameraman and star of the television series 'SurvivorMan'.This knife is a collaboration between Les and the famous Norwegian company Helle.
Intended use: hunting
Type of production: semi-crafted
Blade: Sandvik 14C28N steel
Handle: Birch
Blade length: 110mm.
Blade thickness: 3mm.
Total length: 230mm.
Balance: set back 2.5cm
Weight: 143g.
Sheath: leather
More information: http://www.lesstroud.ca/HE-1300 -
Helle Norway - Vintage Fabrikker Norway knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in excellent condition, it has some marks on the blade from the years
* Available on the market: no longer in production, difficult to find, dating back to the 90s
* Sharpening: Original
* Marks on the blade: small scratches
* Marks on the handle: no
* Box: without box
* Sheath: in brown leather
* Manuals, Certificates and Warranties: absent
* Checked and certified by our internal laboratoryIntended use: hunting
Type of production: industrial
Blade: Sandvik 12C27 stainless steel
Blade treatment: -
Handle: leather discs
Blade length: 150mm.
Blade thickness: 2.5mm.
Closed Length: -
Total length: 270mm.
Balance: set back to 2.5cm
Weight: 220g.
Closure: -
Clip: -
Sheath: leather
Note: -HE-FAB -
Fantoni - HB01 by W. Harsey - M390 & Carbon Fiber - knife
Intended use: Tactical / Sports
Type of production: Industrial
Production Country: Italy
Blade: M390 61 / 62HRC stainless steel
Blade treatment: Stone Washed
Handle: Titanium and Carbon Fiber
Blade length: 107mm.
Blade thickness: 4mm.
Closed Length: 130mm.
Overall length: 240mm.
Thick when closed: 17mm.
Weight: 170g.
Lock: Liner Lock
Clip: Removable, titanium
Packaging: cardboard box
Notes: Opening with Carson Flipper system - Design by William W. HARSEYF-HB01-CF -
Fantoni - HB03 by W. Harsey - M390 & Brown G10 - knife
Intended use: Tactical / Sports
Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 61 / 62HRC
Blade treatment: Stone Washed
Grip: titanium folders and G-10 grips
Blade length: 94mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 206mm.
Thick when closed: 15mm.
Weight: 132g.
Closure: Liner Lock
Clip: Removable, titanium
Packaging: cardboard box with Fantoni logos
Notes: Opening via the Carson Flipper system - Design by William W. HarseyF-HB03-BR -
Kiku Matsuda Knives - Kawa Kaze KK01 en acero SanMai Cuchillo fijo - cuchillo artesanal
Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years he has collaborated with SOG, William Henry, Pro-Tech and Randall Kings, developing blades, sharpening and burring.
Uso previsto: Colección / Deportes
Tipo de producción: Artesano
Producción de Lama: Japón
Hoja: acero inoxidable SanMai SPG2 con 67 capas - 63/64 HRC
Tratamiento con cuchilla: -
Manija: Lona negra Micarta
Longitud de la hoja: 95 mm.
Espesor de la hoja: 3.9mm.
Longitud cerrada: -
Longitud total: 200 mm.
Espesor cuando está cerrado: -
Equilibrio: -
Peso: 132 g.
Cierre: -
Clip: -
Funda: en Kydex con ataque Tek-Lok
Paquete: -
Notas: En 2007, Kiku Matsuda ganó el prestigioso Blade Show "Cuchillo del año" con un proyecto creado en colaboración con SOG.KK01 -
Kiku Matsuda Knives - Southern Cross KM-760 Fixed Knife - craft knife
Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years he has collaborated with SOG, William Henry, Pro-Tech and Randall Kings, developing blades, sharpening and burring.
Intended use: Collection / Sports
Type of production: Artisan
Lama production: Japan
Blade: OU-31 carbon steel hardened to 63/64 HRC
Blade treatment: -
Handle: Black Canvas Micarta
Blade length: 80mm.
Blade thickness: 5.3mm.
Length closed: -
Total length: 195mm.
Thickness when closed: -
Balancing: -
Weight: 186g.
Closure: -
Clip: -
Sheath: in Kydex with Tek-Lok attack
Package: -
Notes: Kiku Matsuda won in 2007 the prestigious "Knife Of The Year Awards" Blade Show with a project realized in collaboration with SOGKM-760 -
Fantoni - HB03 by W. Harsey - M390 & Orange G10 - knife
Intended use: Tactical / Sports
Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 61 / 62HRC
Blade treatment: Stone Washed
Grip: titanium folders and G-10 grips
Blade length: 94mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 206mm.
Thick when closed: 15mm.
Weight: 132g.
Closure: Liner Lock
Clip: Removable, titanium
Packaging: cardboard box with Fantoni logos
Notes: Opening via the Carson Flipper system - Design by William W. HarseyF-HB03-OR -
Kiku Matsuda Knives - Back Up Neo 300 Fixed Blade Knife - craft knife
Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years he has collaborated with SOG, William Henry, Pro-Tech and Randall Kings, developing blades, sharpening and burring.
Purpose of use: Collection / Sportsman
Type of production: Artisan
Blade Production: Japan
Blade: OU-31 carbon steel hardened to 63/64 HRC
Blade Treatment: -
Manicure: Black Canvas Micarta
Blade Length: 140mm.
Blade thickness: 6.5mm.
Closed length: -
Total Length: 270mm.
Closure thickness: -
Balance: -
Weight: 384g.
Closure: -
Clip: -
Sheath: in Kydex with Tek-Lok attachment
Packing: -
Notes: Kiku Matsuda won the prestigious prize at the Blade Show "Knife Of The Year Awards" in 2007 with a project made in collaboration with SOGKM-300 -
Kiku Matsuda Knives - Back Up Zero 490 Fixed Blade Knife - artisan knife
Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years he has collaborated with SOG, William Henry, Pro-Tech and Randall Kings, developing blades, sharpening and burring.
Purpose of use: Collection / Sportsman
Type of production: Artisan
Blade Production: Japan
Blade: OU-31 carbon steel hardened to 63/64 HRC
Blade Treatment: -
Manicure: Green Canvas Micarta
Blade Length: 98mm.
Blade thickness: 5.5mm.
Closed length: -
Total length: 200mm.
Closure thickness: -
Balance: -
Weight: 250g.
Closure: -
Clip: -
Sheath: in Kydex with Tek-Lok attachment
Packing: -
Notes: Kiku Matsuda won the prestigious award at the Blade Show "Knife Of The Year Awards" in 2007 with a project made in collaboration with SOG KnivesKM-490 -
Kiku Matsuda Knives - J Defender Fixed Blade - custom knife
Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years, he has worked with SOG, William Henry, Pro-Tech and Randall Kings for blades, sharpening and burring.
Purpose: Collection / Sportsman
Type of production: Artisan
Blade Production: Japan
Blade: OU-31 carbon steel hardened to 63/64 HRC
Blade treatment: acidification with subsequent polishing and polishing of the wire
Handle: G10
Blade Length: 135mm.
Blade thickness: 4.5mm.
Total length: 250mm.
Weight: 186g.
Sheath: in thermoformed Kydex, with Tek-Lok attachment
Packing: cardboard box with Kiku Knives logos
Notes: Kiku Matsuda won the prestigious award at the Blade Show "Knife Of The Year Awards" in 2007 with a project made in collaboration with SOG KnivesKM-730 -
Fantoni - Hide Folder by T. Rumici - two hands opening - buffalo horn - knife
Intended use: Utility / Collection
Type of production: Industrial
Blade: CPM-S30V stainless steel 61-62HRC
Blade treatment: Stone-Washed
Country of production: Maniago - Italy
Handle: buffalo horn
Blade length: 75mm.
Blade thickness: 3.2mm.
Closed Length: 102mm.
Overall length: 178mm.
Weight: 109g.
Lock: Back Lock
Clip: reversible, stainless steel
Notes: two-handed blade opening - Design by T. Rumici12644 -
Fantoni - HB01 by W. Harsey - Oramge G10 - knife
Intended use: Tactical / Sports
Type of production: Industrial
Production Country: Italy
Blade: CPM-S35VN Steel 60 / 61HRC
Blade treatment: Stone Washed
Handle: Titanium and G-10
Blade length: 107mm.
Blade thickness: 4mm.
Closed Length: 130mm.
Overall length: 240mm.
Thick when closed: 17mm.
Weight: 170g.
Lock: Liner Lock
Clip: Removable, titanium
Packaging: cardboard box
Notes: Opening with Carson Flipper system - Design by William W. HARSEY1328OR -
Fantoni - HB03 by W. Harsey - Dark Green G10 - knife
Intended use: Tactical / Sports
Type of production: Industrial
Production Country: Italy
Blade: stainless steel CPM-S35VN 61 / 62HRC
Blade treatment: Stone Washed
Handle: Titanium and G-10
Blade length: 94mm.
Blade thickness: 4mm.
Closed Length: 116mm.
Overall length: 206mm.
Thick when closed: 15mm.
Weight: 132g.
Lock: Liner Lock
Clip: Removable, titanium
Packaging: cardboard box with logos Fantoni
Notes: Opening via Carson Flipper system - Design by William W. HARSEY12368DG -
Helle Norway - Skala Foldekniv knife - No.212
Intended use: hunting
Type of production: Industrial
blade production: Norway
Blade: 12C27 stainless steel 59HRC
Blade treatment: -
manicatura: cocobolo wood
Blade length: 85mm.
blade thickness: 3mm.
Closed length: 115
Total length: 200mm.
thick when closed: 1.8 cm
Weight: 117g.
Closing: back lock
Clip: -
Sheath: Brown leather
Packaging: cylindrical cardboard box more cloth cotton branded Helle
Notes: -HE-212 -
Fantoni - HB Fixed G10 Black PVD - Design by W. Harsey - messer
Intended use: Tactical / Collection
Type of production: Industrial
Blade: CPM-S35VN stainless steel 61-62HRC
Blade treatment: Black PVD
Production Lama: Italy
Handle: Micarta type Loveless
Blade length: 90mm.
Blade Thickness: 4mm.
Closed Length: -
Overall length: 200mm.
Balancing: backward to 2 cm. the branch of the lower guard
Weight: 124g.
Closed: -
Clip: -
Sheath: Kydex with Tech Lock
Notes: Design by W. HARSEY11093B -
Fantoni - HB Fixed by W. Harsey - Black G10 - knife
Intended use: Tactical / Collection
Type of production: Industrial
Blade: CPM-S35VN stainless steel 61-62HRC
Blade treatment: Stone Washed
Country of production: Italy
Handle: Black G10
Blade length: 90mm.
Blade Thickness: 4mm.
Overall length: 200mm.
Balancing: backward to 2 cm. the branch of the lower guard
Weight: 124g.
Sheath: Leather
Notes: Design by W. HARSEY11093 -
Halcon Spain - Spanish Traditional Stiletto bladeless block - 11,5cm - vintage knife
Intended Use: collection
Production Type Semi-Handmade
Blade: stainless steel 420
Production Country: Spain
Handle: brass with wooden insert
Blade length: 11.5mm.
Blade Thickness: 2mm.
Overall length: 255mm.
Closed Length: 134mm.
Closing system: -
Weight: 76g.
Sheath: -
Packaging: -
Notes: Spanish traditional stiletto late 80shalconL€32.79Out of stock -
Halcon Spain - Spanish Traditional Stiletto bladeless block - 8,5cm - vintage knife
Halcon Spain - Spanish Traditional Stiletto bladeless block - 8,5cm - vintage knife
Intended Use: collectionProduction Type Semi-Handmade
Blade: stainless steel 420
Production Country: Spain
Handle: brass with wooden insert
Blade length: 8.5mm.
Blade Thickness: 2mm.
Overall length: 185mm.
Closed Length: 100mm.
Closing system: -
Weight: 30g.
Sheath: -
Packaging: -
Notes: Spanish traditional stiletto late 80shalcon2€24.59Only 0 leftOut of stock -
Halcon Spain - Spanish Traditional Stiletto 8.5 cm blade - knife
Halcon Spain - Spanish Traditional Stiletto 8.5 cm blade - knife
Intended Use: collection
Production Type Semi-Handmade
Blade: stainless steel 420
Production Country: Spain
Handle: brass with wooden insert
Blade length: 90mm.
Blade Thickness: 2mm.
Overall length: 195mm.
Closed Length: 105mm.
Locking system: back lock
Weight: 54g.
Sheath: -
Packaging: -
Notes: Spanish traditional stiletto late 80shalcon1€32.79Only 0 leftOut of stock -
Kiku Matsuda Knives - Karambit Desperade - handmade knife
Kiku Matsuda is one of the most famous artists and scholars sharpening throughout Japan; probably in your collection is already a fruit knife of his passion: collaborates for several years with SOG, William Henry, Pro-Tech and Randall Kings developing to their bevels, and politure sharpening the blades.
Intended Use: Collection / TacticalType of production: Handmade
Production Country: Japan
Blade: D2 hardened carbon steel to 61 HRC
Handle: Green Canvas Micarta
Blade length: 113mm.
Blade thickness: 5mm.
Overall length: 232mm.
Balancing: Set back
Weight: 210g.
Sheath: Kydex with Tek-Lok attack
Notes: Kiku Matsuda won in 2007 the prestigious prize at the Blade Show "Knife Of The Year Awards" with a project carried out in collaboration with SOG Knives12508 -
Fantoni - Hide Fixed Micarta - Leather Sheath - Design by T. Rumici - knife
Intended use: Fighter / Tactical / Collection
Type of production: industry
Blade: stainless steel CPM-S30V to 61-62HRC
Blade reatment: Stone Washed
Production Country: Italy
Handle: Micarta Loveless type
Blade length: 80mm.
Blade Thickness: 4mm.
Overall length: 170mm.
Balancing: back to 1cm. from the branch of the lower guard
Weight: 69g.
Sheath: leather, entirely Made in Italy
Notes: Design by T. Rumici12405 -
Fantoni - HB03 Flipper by William W. Harsey - CPM-S35VN & Black G10 - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel CPM-S35VN 61/62HRC
Blade Treatment: Stone Washed
Handle: Titanium and G-10
Blade Length: 94mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 206mm.
Thickness when closed: 15mm.
Weight: 132g.
Closure: LinerLock in titanium
Clip: Removable and reversible, in titanium
Package: Cardboard box with Fantoni logos
Notes: Opening by Carson Flipper system - Design by William W. Harsey12368 -
Kiku Matsuda Knives - Momose Gawa Fishing Knife KM-390 - Knife
Kiku Matsuda Knives - Momose Gawa Fishing Knife KM-390 - Knife
Kiku Matsuda is a great fisherman and model Momose Gawa is his favorite for fishing in the river.
Intended use: Sport / Fishing
Type of production: Artisan
Production Lama: Japan
Blade: stainless steel 14C28N
Treatment Lama: acid
Handle: Black Canvas Micarta
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: -
Overall length: 170mm.
Thick when closed: -
Balancing: -
Weight: 74g.
Closing: -
Clip: -
Sheath: Kydex attack with Tek-Lok
Packaging: -
Notes: Kiku Matsuda won in 2007 the prestigious prize at the Blade Show "Knife Of The Year Awards" with a project in collaboration with SOG KnivesKM-390 -
Kiku Matsuda Knives - Knife KM-340 - craft knife
Kiku Matsuda Knives - Knife KM-340 - craft knife
Intended Use: Collection / Sports / Tactical
Unique and no longer produced by Kiku
Type of production: Artisan
Production Lama: Japan
Blade: carbon steel 61HRC D2
Treatment Lama: acid
Handle: Black G10
Blade length: 195mm.
Blade thickness: 5mm.
Length closed: -
Overall length: 340mm.
Thick when closed: -
Balancing: -
Weight: 440g.
Closing: -
Clip: -
Sheath: Kydex attack with Tek-Lok
Packaging: -
Notes: Kiku Matsuda won in 2007 the prestigious prize at the Blade Show "Knife Of The Year Awards" with a project in collaboration with SOG KnivesHK-340 -
Kiku Matsuda Knives - Yuki Kaze Knife KM-460 - craft knife
Kiku Matsuda Knives - Yuki Kaze Knife KM-460 - craft knife
Intended Use: Collection / Sports / Tactical
Type of production: Artisan
Production Lama: Japan
Blade: carbon steel OU-31 hardened to 63/64 HRC
Treatment Lama: -
Handle: Black Canvas Micarta
Blade length: 176mm.
Blade thickness: 6,8mm.
Length closed: -
Overall length: 314mm.
Thick when closed: -
Balancing: -
Weight: 486g.
Closing: -
Clip: -
Sheath: Kydex attack with Tek-Lok
Packaging: -
Notes: Kiku Matsuda won in 2007 the prestigious prize at the Blade Show "Knife Of The Year Awards" with a project in collaboration with SOG KnivesKM-460 -
Fantoni - Hide Folder - Orange G10 - Limited Edition - Design by T. Rumici - knife
Intended Use: Sport / Tactical / Collection
Type of production: Industrial
Blade: Stainless steel CPM-S30V 61-62HRC
Treatment Lama: Stone-Washed
Production Lama: Italy
Handle: G10 Orange
Blade length: 75mm.
Blade Thickness: 3.2mm.
Closed Length: 102mm.
Overall length: 178mm.
Balancing: -
Weight: 109g.
Closure: Back Lock
Clip: Reversible, Steel
Notes: Design by Rumici T. and M. Fantoni - First production run limited edition in just 25 numbered pieces of blade and box.12293 -
Fantoni - Hide Folder G10 - Limited Edition # 23/25 - Design by T. Rumici - knife
Intended Use: Sport / Tactical / Collection
Type of production: Industrial
Blade: Stainless steel CPM-S30V 61-62HRC
Treatment Lama: Stone-Washed
Production Lama: Italy
Handle: G10 Black
Blade length: 75mm.
Blade Thickness: 3.2mm.
Closed Length: 102mm.
Overall length: 178mm.
Balancing: -
Weight: 109g.
Closure: Back Lock
Clip: Reversible, Steel
Notes: Design by Rumici T. and M. Fantoni - First production run limited edition in just 25 numbered pieces of blade and box. Exemplary number 23 of 25.12291 -
Fantoni - HB Fixed G10 - Design by W. Harsey - knife
Destinazione d'uso: Tattico/Collezione
Tipo di produzione: industriale
Lama: in acciaio inox CPM-S35VN a 61-62HRC
Trattamento Lama: Stone Washed
Produzione Lama: Italia
Manicatura: Micarta tipo Loveless
Lunghezza lama: 90mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 200mm.
Bilanciatura: arretrata a 2 cm. dal ramo di guardia inferiore
Peso: 124g.
Chiusura: -
Clip: -
Fodero: in Kydex, con attacco tipo Tek-Lok
Note: Design by W. Harsey12267 -
Kiku Matsuda Knives - Hasinau Kamui Master Hunters - craft knife
Kiku Matsuda è uno dei più famosi artisti e studiosi dell'affilatura di tutto il Giappone; probabilmente nella vostra collezione sarà già presente un coltello frutto della sua passione: collabora infatti da diversi anni con SOG, William Henry, Pro-Tech e Randall Kings sviluppando per loro bisellature, affilature e politure delle lame.
Destinazione d'uso: Collezione/Caccia
Tipo di produzione: Artigianale
Produzione Lama: Giappone
Lama: in acciaio al carbonio OU-31 temprato a 63/64 HRC
Trattamento Lama: -
Manicatura: G10 Black
Lunghezza lama: 130mm.
Spessore lama: 5,0mm.
Lunghezza chiuso: -
Lunghezza totale: 260mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 360g.
Chiusura: -
Clip: -
Fodero: in Kydex con attacco Tek-Lok
Confezione: -
Note: Questo coltello è stato disegnato dal giapponese Mr. Chujyo di Hokkaido - Kiku Matsuda ha vinto nel 2007 il prestigioso premio al Blade Show "Knife Of The Year Awards" con un progetto realizzato in collaborazione con SOG KnivesKnife Of The Year Awards Knife Of The Year AwardsKM-500A -
Kiku Matsuda Knives - Blast Fixed Blade - custom knife
Kiku Matsuda is one of the most famous artisans and scholars of all over Japan; Probably in your collection you will already have a knife that is the fruit of your passion. For several years, he has worked with SOG, William Henry, Pro-Tech and Randall Kings for blades, sharpening and burring.
Purpose: Collection / Sportsman
Type of production: Artisan
Blade Production: Japan
Blade: OU-31 carbon steel hardened to 63/64 HRC
Blade treatment: acidification with subsequent polishing and polishing of the wire
Handle: Black Canvas Micarta
Blade Length: 150mm.
Blade thickness: 5.8mm.
Total Length: 275mm.
Weight: 390g.
Sheath: in thermoformed Kydex, with Tek-Lok attachment
Packing: cardboard box with Kiku Knives logos
Notes: Kiku Matsuda won the prestigious award at the Blade Show "Knife Of The Year Awards" in 2007 with a project made in collaboration with SOG KnivesKM-215 -
Kiku Matsuda Knives - Aoba Fixed Blade Knife - craft knife
Kiku Matsuda è uno dei più famosi artisti e studiosi dell'affilatura di tutto il Giappone; probabilmente nella vostra collezione sarà già presente un coltello frutto della sua passione: collabora infatti da diversi anni con SOG, William Henry, Pro-Tech e Randall Kings sviluppando per loro bisellature, affilature e politure delle lame.
Destinazione d'uso: Collezione/Sportivo
Tipo di produzione: Artigianale
Produzione Lama: Giappone
Lama: in acciaio al carbonio OU-31 temprato a 63/64 HRC
Trattamento Lama: -
Manicatura: Black Canvas Micarta
Lunghezza lama: 105mm.
Spessore lama: 5,5mm.
Lunghezza chiuso: -
Lunghezza totale: 215mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 260g.
Chiusura: -
Clip: -
Fodero: in Kydex con attacco Tek-Lok
Confezione: -
Note: Kiku Matsuda ha vinto nel 2007 il prestigioso premio al Blade Show "Knife Of The Year Awards" con un progetto realizzato in collaborazione con SOG KnivesKnife Of The Year Awards Knife Of The Year AwardsAB31 -
Kiku Matsuda Knives - Back Up Small Fixed Blade Knife - craft knife
Kiku Matsuda è uno dei più famosi artisti e studiosi dell'affilatura di tutto il Giappone; probabilmente nella vostra collezione sarà già presente un coltello frutto della sua passione: collabora infatti da diversi anni con SOG, William Henry, Pro-Tech e Randall Kings sviluppando per loro bisellature, affilature e politure delle lame.
Destinazione d'uso: Collezione/Sportivo
Tipo di produzione: Artigianale
Produzione Lama: Giappone
Lama: in acciaio al carbonio OU-31 temprato a 63/64 HRC
Trattamento Lama: -
Manicatura: Green Canvas Micarta
Lunghezza lama: 98mm.
Spessore lama: 5,5mm.
Lunghezza chiuso: -
Lunghezza totale: 200mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 250g.
Chiusura: -
Clip: -
Fodero: in Kydex con attacco Tek-Lok
Confezione: -
Note: Kiku Matsuda ha vinto nel 2007 il prestigioso premio al Blade Show "Knife Of The Year Awards" con un progetto realizzato in collaborazione con SOG KnivesKnife Of The Year Awards Knife Of The Year AwardsBUP-MN -
Valyrian Steel - Catspaw VS0102 Blade - Game of Thrones Game of Thrones
A blade of Valyrian steel that Catelyn Stark recovered from the assassin sent to finish her son Bran. It was taken to King’s Landing by Lady Stark and shown to Petyr Baelish, who identified it as belonging to Tyrion Lannister. This adult collectible is officially licensed from HBO®'s hit series Game of Thrones® and is an edition strictly limited to 2500 pieces.
The Game of Thrones® Collection is a series of collectible weapons and armor painstakingly recreated from the actual props used on HBO®’s hit fantasy epic Game of Thrones®. The officially licensed collectibles are made from the highest quality materials and have been crafted with special attention to reproduce the authentic details found on the props.
This item is not a toy, please keep out of the reach of children. This replica is intended solely for display purposes as a collector's item. Official HBO Licensed Product © 2012 Home Box Office, Inc. All Rights Reserved. Game of Thrones is a trademark of Home Box Office, Inc. Produced under License by Jalic Inc.
Overall Length: 19.5"
Blade Length: 10"
Blade Material: High carbon damascus steel
Handle: Faux "dragon bone" grip with 24k gold plated metal parts.
Plaque: Silkscreened wood with Game of Thrones® motif.VS0102€409.02Out of stock -
Fantoni - William W. Harsey HB 01 Dark Green - knife
Intended use: Tactical / Sport
Type of production: Industrial
Production Blade: Italy
Blade: CPM-S35VN steel 60/61HRC
Treatment Blade: Stone Washed
Handle: Titanium and G-10
Blade length: 107mm.
Blade thickness: 4mm.
Closed Length: 130mm.
Overall length: 240mm.
Thick when closed: 17mm.
Balancing: -
Weight: 170g.
Lock: Liner Lock
Clip: Removable, titanium
Sheath: -
Packaging: cardboard box
Notes: Design by William W. Harsey12018 -
Fantoni - William W. Harsey HB 01 CPM-125V limited edition - knife
Fantoni - William W. Harsey HB 01 CPM-125V limited edition - knife
Intended use: Tactical / Sport
Type of production: Industrial
Production Blade: Italy
Blade: Stainless CPM-125V 62/63HRC
Treatment Blade: Stone Washed
Handle: Titanium and G-10
Blade length: 107mm.
Blade thickness: 4mm.
Closed Length: 130mm.
Overall length: 240mm.
Thick when closed: 17mm.
Balancing: -
Weight: 170g.
Lock: Liner Lock
Clip: Removable, titanium
Sheath: -
Packaging: cardboard box
Notes: Design by William W. Harsey - limited edition of 100 pieces1328-S125V -
Helle Norway - Dokka 3L - No.200 knife
Intended Use: Hunting
Type of production: industrial
Production Blade: Norway
Blade: rolled steel cheeks with 18/8 stainless steel 59HRC and sharp
Treatment Lama: -
Handle: Birch wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 115
Total length: 200mm.
Thick when closed: 1.8 cm
Weight: 130g.
Closure: back lock
Clip: -
Sheath: Brown leather
Packaging: cylindrical cardboard case more cotton cloth marked Helle
Notes: -HE-200 -
Fantoni - William W. HARSEY HB 02 - Black PVD - knife
ntended use: Tactical / Sports
Type of production: Industrial
Production Lama: Italy
Blade: Stainless CPM-S35VN 61 / 62HRC
Treatment Lama: PVD
Handle: Titanium and G-10
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 100mm.
Overall length: 180mm.
Thick when closed: 15mm.
Balancing: -
Weight: 88g.
Lock: Liner Lock
Clip: Removable, titanium
Sheath: -
Packaging: cardboard box
Notes: Design by William W. HARSEY10019 -
Fantoni - D. Sinkevich C.U.T. Fixed Blade - Knife
Fantoni - D. Sinkevich C.U.T. Fixed Blade - Knife
Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel CPM-S30V 61/62HRC
Treatment Blade: Satin
Handle: G-10
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: -
Overall length: 228mm.
Thick when closed: 16mm
Balancing: -
Weight: 175g.
Closure: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos Fantoni
Notes: -7286F -
Fantoni - Hide Folder Buffalo - Design by T. Rumici - knife
Intended Use: Sport / Tactical / Collection
Type of production: Industrial
Blade: Stainless steel CPM-S30V 61-62HRC
Treatment Lama: Stone-Washed
Production Lama: Italy
Handle: Buffalo Horn
Blade length: 75mm.
Blade Thickness: 3.2mm.
Closed Length: 102mm.
Overall length: 178mm.
Balancing: -
Weight: 109g.
Closure: Back Lock
Clip: Reversible, Steel
Notes: Design by Rumici T. and M. Fantoni7282B -
Fantoni - Hide Folder by T. Rumici - Stag Horn - knife
Intended use: Utility / Collection
Type of production: Industrial
Blade: CPM-S30V stainless steel 61-62HRC
Blade treatment: Stone-Washed
Country of production: Maniago - Italy
Handle: stag horn
Blade length: 75mm.
Blade thickness: 3.2mm.
Closed Length: 102mm.
Overall length: 178mm.
Weight: 109g.
Lock: Back Lock
Clip: reversible, stainless steel
Notes: two-handed blade opening - Design by T. Rumici7282C -
Fantoni - D. Sinkevich C.U.T. Contrast Utility Knife - coltello
Destinazione d'uso: Tattico/Sportivo
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio CPM-S30V 60/61HRC
Trattamento Lama: Stone Washed
Manicatura: Titanio e G-10
Lunghezza lama: 93mm.
Spessore lama: 3.8mm.
Lunghezza chiuso: -
Lunghezza totale: 216mm.
Spessore da chiuso: 16mm.
Bilanciatura: -
Peso: 153g.
Chiusura: Liner Lock
Clip: Amovibile, in titanio
Fodero: -
Confezione: scatola in cartone
Note: Design by D. Sinkevich7286 -
Fantoni - Dweller knife - Corno di Bufalo
Destinazione d'uso: Sportivo / EDC
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox 19C27
Trattamento Lama: -
Manicatura: Corno di Bufalo
Lunghezza lama: 63mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 99mm.
Lunghezza totale: 160mm.
Spessore da chiuso: 11mm.
Bilanciatura: -
Peso: 58g.
Chiusura: Molla Semplice
Clip: -
Fodero: Tasca in cuoio
Confezione: scatola in cartone con loghi Fantoni
Note: Design by Massimo Fantoni7284 -
Fantoni - HB01 by W. Harsey - Black G10 - knife
Intended use: Tactical / Sports
Type of production: Industrial
Production Country: Italy
Blade: CPM-S30V 61-62HRC
Blade treatment: Stone Washed
Handle: Titanium and G-10
Blade length: 107mm.
Blade thickness: 4mm.
Closed Length: 130mm.
Overall length: 240mm.
Thick when closed: 17mm.
Weight: 170g.
Lock: Liner Lock
Clip: Removable, titanium
Packaging: cardboard box
Notes: Opening with Carson Flipper system - Design by William W. HARSEY1328 -
Fantoni - HB02 Flipper Folder by William Harsey - Black G10 - Knife
Fantoni - William W. Harsey HB 02 - knife
Intended use: Tactical / Sport
Type of production: Industrial
Production Blade: Italy
Blade: CPM-S30V steel 60/61HRC
Treatment Blade: Stone Washed
Handle: Titanium and G-10
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 100mm.
Overall length: 180mm.
Thick when closed: 15mm.
Balancing: -
Weight: 88g.
Lock: Liner Lock
Clip: Removable, titanium
Sheath: -
Packaging: cardboard box
Notes: Design by William W. Harsey1327 -
Fantoni - Hide Fixed Bufalo knife - Limited Edition - Design by T. Rumici
Trattandosi di un materiale naturale, segnaliamo che i modelli disponibili a magazzino potrebbero avere sfumature e colorazioni differenti dell'impugnatura
Destinazione d'uso: Sportivo/Collezione
Tipo di produzione: industriale
Lama: in acciaio 61-62HRC CPM-S30V
Trattamento Lama: Stone Washed
Produzione Lama: Italia
Manicatura 1: Corno di Bufalo
Lunghezza lama: 80mm.
Spessore della lama: 3.5mm.
Lunghezza chiuso: -
Lunghezza totale: 170mm.
Bilanciatura: arretrata ad 1cm. dal ramo di guardia inferiore
Peso: 68g.
Chiusura: -
Clip: -
Fodero: In cuoio, di primissima qualità, Made in Italy
Note: Scatola regalo cartonata, certificati di garanzia, edizione limitata e numerata di soli 18 esemplari - Design by T. Rumici7280BU -
Fantoni - Hide Fixed Iron Wood - Premium Limited Edition - Design by T. Rumici
Destinazione d'uso: Sportivo/Collezione
Tipo di produzione: industriale
Lama: in acciaio 61-62HRC CPM-S30V
Trattamento Lama: Stone Washed
Produzione Lama: Italia
Manicatura: Iron Wood di 600 anni
Lunghezza lama: 80mm.
Spessore della lama: 3.5mm.
Lunghezza chiuso: -
Lunghezza totale: 170mm.
Bilanciatura: arretrata ad 1cm. dal ramo di guardia inferiore
Peso: 68g.
Chiusura: -
Clip: -
Fodero: In cuoio, di primissima qualità, Made in Italy
Note: Scatola regalo cartonata, certificati di garanzia, edizione limitata e numerata di soli 20 esemplari - Design by T. Rumici7280IW -
Fantoni - Hide Fixed knife Cervo - Premium Limited Edition - Design by T. Rumici
Destinazione d'uso: Sportivo/Collezione
Tipo di produzione: industriale
Lama: in acciaio 61-62HRC CPM-S30V
Trattamento Lama: Stone Washed
Produzione Lama: Italia
Manicatura 1: Cervo
Lunghezza lama: 80mm.
Spessore della lama: 3.5mm.
Lunghezza chiuso: -
Lunghezza totale: 170mm.
Bilanciatura: arretrata ad 1cm. dal ramo di guardia inferiore
Peso: 68g.
Chiusura: -
Clip: -
Fodero: In cuoio, di primissima qualità, Made in Italy
Note: Scatola regalo cartonata, certificati di garanzia, edizione limitata e numerata di soli 20 esemplari - Design by T. Rumici7280CE -
Fantoni - Hide Fixed knife Cocobolo - Limited Edition - Design by T. Rumici
Destinazione d'uso: Sportivo/Collezione
Tipo di produzione: industriale
Lama: in acciaio 61-62HRC CPM-S30V
Trattamento Lama: Stone Washed
Produzione Lama: Italia
Manicatura: Legno di Cocobolo
Lunghezza lama: 80mm.
Spessore della lama: 3.5mm.
Lunghezza chiuso: -
Lunghezza totale: 170mm.
Bilanciatura: arretrata ad 1cm. dal ramo di guardia inferiore
Peso: 68g.
Chiusura: -
Clip: -
Fodero: In cuoio, di primissima qualità, Made in Italy
Note: Scatola regalo cartonata, certificati di garanzia, edizione limitata e numerata di soli 20 esemplari - Design by T. Rumici7280CO -
Fantoni - Hide Fixed Micarta - Design by T. Rumici
Nuova versione 2014, ora con fodero più compatto e robusto e con attacchi di tipo Tek-Lok
Destinazione d'uso: Fighter/Tattico/Collezione
Tipo di produzione: industriale
Lama: in acciaio inox CPM-S30V a 61-62HRC
Trattamento Lama: Stone Washed
Produzione Lama: Italia
Manicatura: Micarta tipo Loveless
Lunghezza lama: 80mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 170mm.
Bilanciatura: arretrata ad 1cm. dal ramo di guardia inferiore
Peso: 69g.
Chiusura: -
Clip: in acciaio
Fodero: in Kydex, con attacco tipo Tek-Lok
Note: Design by T. Rumici7280S -
Fantoni - Hide Fixed Snake Wood - Limited Edition - Design by T. Rumici
Destinazione d'uso: Sportivo/Collezione
Tipo di produzione: industriale
Lama: in acciaio 61-62HRC CPM-S30V
Trattamento Lama: Stone Washed
Produzione Lama: Italia
Manicatura 1: Snake Wood
Lunghezza lama: 80mm.
Spessore della lama: 3.5mm.
Lunghezza chiuso: -
Lunghezza totale: 170mm.
Bilanciatura: arretrata ad 1cm. dal ramo di guardia inferiore
Peso: 68g.
Chiusura: -
Clip: -
Fodero: In cuoio, di primissima qualità, Made in Italy
Note: Scatola regalo cartonata, certificati di garanzia, edizione limitata e numerata di soli 20 esemplari - Design by T. Rumici7280SW -
Fantoni - Hide Folder Micarta - Design by T. Rumici knife
Fantoni - Hide Folder Micarta - Design by T. Rumici knife
Intended use: Fighter / Tactical / Collection
Type of production: industrial
Blade: Stainless Steel CPM-S30V 61-62HRC
Treatment Blade: Stone-Washed
Production Blade: Italy
Handle: Micarta Loveless
Blade length: 75mm.
Blade Thickness: 3.2 mm.
Closed Length: 102mm.
Overall length: 178mm.
Balancing: -
Weight: 102g.
Closure: Back Lock
Clip: Reversible, Stainless Steel
Notes: Design by T. Rumici and M. Fantoni7282 -
Fantoni - Mix - Black G10 coltello
Destinazione d'uso: Sportivo/Tattico
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Stone Washed
Manicatura: G10 e Acciaio Inox
Lunghezza lama: 87mm.
Spessore lama: 3mm.
Lunghezza chiuso: 115mm.
Lunghezza totale: 203mm.
Spessore da chiuso: 12mm.
Bilanciatura: -
Peso: 122g.
Chiusura: Back Lock
Clip: in acciaio inox
Fodero: -
Confezione: Astuccio di cartone con loghi Fantoni
Note: Design by Massimo Fantoni7285B -
Fantoni - Mix - Green G10 - knife
Fantoni - Mix - Green G10 - knife
Intended Use: Sport / Tactical
Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel CPM-S30V
Treatment Blade: Stone Washed
Handle: G-10 and Stainless Steel
Blade length: 87mm.
Blade thickness: 3mm.
Closed Length: 115mm.
Overall length: 203mm.
Thick when closed: 12mm.
Balancing: -
Weight: 122g.
Closure: Back Lock
Clip: Stainless Steel
Sheath: -
Packing: Carton with logos Fantoni
Notes: Design by Massimo Fantoni7285G -
Fantoni - Mix - Orange G10 knife
Fantoni - Mix - Orange G10 knife
Intended Use: Sport / Tactical
Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel CPM-S30V
Treatment Blade: Stone Washed
Handle: G-10 and Stainless Steel
Blade length: 87mm.
Blade thickness: 3mm.
Closed Length: 115mm.
Overall length: 203mm.
Thick when closed: 12mm.
Balancing: -
Weight: 122g.
Closure: Back Lock
Clip: Stainless Steel
Sheath: -
Packing: Carton with logos Fantoni
Notes: Design by Massimo Fantoni7285OR -
Fantoni - Mix knife - Blue G10
Destinazione d'uso: Sportivo/Tattico
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Stone Washed
Manicatura: G10 e Acciaio Inox
Lunghezza lama: 87mm.
Spessore lama: 3mm.
Lunghezza chiuso: 115mm.
Lunghezza totale: 203mm.
Spessore da chiuso: 12mm.
Bilanciatura: -
Peso: 122g.
Chiusura: Back Lock
Clip: in acciaio inox
Fodero: -
Confezione: Astuccio di cartone con loghi Fantoni
Note: Design by Massimo Fantoni7285BL -
Fantoni - RRK - Race Rescue Knife - PC001 - coltelli
Il coltello RRK (Race Rescue Knife) è stato sviluppato in collaborazione con l'RYA (Royal Yachting Association) allo scopo di servire da attrezzo multiruolo nell'ambito della sicurezza personale in una vasta gamma di applicazioni dinamiche.
Il fodero RRK, unico nel suo genere, è stato progettatto per il fissaggio permanente a canotto, yacht, gommone o imbarcazioni di salvataggio.
Destinazione d'uso: sportivo/rescue
Tipo di produzione: Industriale
Produzione Lama: Italia
Trattamento lama : HBC + Teflon Lama: in acciaio AISI 425
Manicatura: EPTR Thermorubber
Lunghezza lama: 105mm.
Spessore lama: 3mm.
Lunghezza Totale: 215mm
Peso: 223g.
Fodero: Nylon 666 + Fiberglass
Confezione: scatola in cartone con loghi1382 -
Fantoni - RRK - Race Rescue Knife - PC020 - coltelli
Il coltello RRK (Race Rescue Knife) è stato sviluppato in collaborazione con l'RYA (Royal Yachting Association) allo scopo di servire da attrezzo multiruolo nell'ambito della sicurezza personale in una vasta gamma di applicazioni dinamiche.
Il fodero RRK, unico nel suo genere, è stato progettatto per il fissaggio permanente a canotto, yacht, gommone o imbarcazioni di salvataggio.
Destinazione d'uso: sportivo/rescue
Tipo di produzione: Industriale
Produzione Lama: Italia
Trattamento lama : HBC + Teflon Lama: in acciaio AISI 425
Manicatura: EPTR Thermorubber
Lunghezza lama: 105mm.
Spessore lama: 3mm.
Lunghezza Totale: 215mm
Peso: 223g.
Fodero: Nylon 666 + Fiberglass
Confezione: scatola in cartone con loghi1383 -
Fantoni - Triglav - Ebano Macasser - coltello
Destinazione d'uso: Caccia / Collezione
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox 1.4116 58/59HRC
Trattamento Lama: lucidatura a specchio
Manicatura: Ebano Macasser
Lunghezza lama: 100mm.
Spessore lama: 3mm.
Lunghezza totale: 238mm.
Peso: 155g.
Fodero: Cuoio
Confezione: scatola in cartone con loghi Fantoni/Triglav
Note: Design by Oskar Skogoj
Triglav (da leggere Triglau) è un coltello da caccia modellato dallo sloveno Oskar Kogoj, uno dei più prestigiosi designers europei. Nasce dalla convinzione che tecnologia avanzata e design d'avanguardia non possono trascurare la grande lezione del passato e non possono dimenticare la cultura della tradizione e della natura.
Oskar Kogoj per modellare il coltello Triglav ha studiato una forma contemporanea ispirandosi alla cultura paleoveneta, ai più significativi giacimenti archeologici: Santa Lucia, Este, Padova, Kuffarn, Bologna, Hallstatt, Novo Mesto, etc. Al patrimonio popolare sloveno, friulano e mitteleuropeo, ricco di tradizioni venatorie e che proprio nei pendii del monte Triglav, Tricorno, Trimusiat, colloca la bella leggenda dello stambecco dalle corna d'oro.
Anche la realizzazione del coltello Triglav coniuga avanguardia e tradizione, tecnologia avanzata e perizia artigianale.
L'ottima tenuta del tagliente è garantina da un acciaio inossidabile ad alto contenuto di carbonio AISI 1.4116; lo stampaggio a caldo della lama, fatto con la stessa cura con cui si producono le palette di turbina, esalta ulteriormente i pregi meccanici della lama.
I trattamenti termici della lama riscoprono la grande tradizione dei fabbri artigiani friulani di Maniago, pur utilizzando i mozzi moderni più sofisticati, quali i forni ad atmosfera controllata ed il raffreddamento a -70°C
Infine per rispettare il design di Kogoj ogni coltello, numerato progressivamente, ogni manico in prezioso noce nazionale o ebano macasser, è rifinito a mano da veri maestri artigiani.
Coltello Triglav è presente nelle collezioni permanenti: The Israel Museum, jerusalem 1990, Bienal of Industrial Design, Ljublijana 1992, Slovenia; etc.1299E -
Fantoni - Triglav - Noce - coltello
Destinazione d'uso: Caccia / Collezione
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox 1.4116 58/59HRC
Trattamento Lama: lucidatura a specchio
Manicatura: Noce
Lunghezza lama: 100mm.
Spessore lama: 3mm.
Lunghezza totale: 238mm.
Peso: 155g.
Fodero: Cuoio
Confezione: scatola in cartone con loghi Fantoni/Triglav
Note: Design by Oskar Skogoj
Triglav (da leggere Triglau) è un coltello da caccia modellato dallo sloveno Oskar Kogoj, uno dei più prestigiosi designers europei. Nasce dalla convinzione che tecnologia avanzata e design d'avanguardia non possono trascurare la grande lezione del passato e non possono dimenticare la cultura della tradizione e della natura.
Oskar Kogoj per modellare il coltello Triglav ha studiato una forma contemporanea ispirandosi alla cultura paleoveneta, ai più significativi giacimenti archeologici: Santa Lucia, Este, Padova, Kuffarn, Bologna, Hallstatt, Novo Mesto, etc. Al patrimonio popolare sloveno, friulano e mitteleuropeo, ricco di tradizioni venatorie e che proprio nei pendii del monte Triglav, Tricorno, Trimusiat, colloca la bella leggenda dello stambecco dalle corna d'oro.
Anche la realizzazione del coltello Triglav coniuga avanguardia e tradizione, tecnologia avanzata e perizia artigianale.
L'ottima tenuta del tagliente è garantina da un acciaio inossidabile ad alto contenuto di carbonio AISI 1.4116; lo stampaggio a caldo della lama, fatto con la stessa cura con cui si producono le palette di turbina, esalta ulteriormente i pregi meccanici della lama.
I trattamenti termici della lama riscoprono la grande tradizione dei fabbri artigiani friulani di Maniago, pur utilizzando i mozzi moderni più sofisticati, quali i forni ad atmosfera controllata ed il raffreddamento a -70°C
Infine per rispettare il design di Kogoj ogni coltello, numerato progressivamente, ogni manico in prezioso noce nazionale o ebano macasser, è rifinito a mano da veri maestri artigiani.
Coltello Triglac è presente nelle collezioni permanenti: The Israel Museum, jerusalem 1990, Bienal of Industrial Design, Ljublijana 1992, Slovenia; etc.1299N -
Fantoni - William W. Harsey HB 01 Desert - knife
Fantoni - William W. Harsey HB 01 Desert - knife
Intended use: Tactical / Sport
Type of production: Industrial
Production Blade: Italy
Blade: CPM-S30V steel 60/61HRC
Treatment Blade: Stone Washed
Handle: Titanium and G-10
Blade length: 107mm.
Blade thickness: 4mm.
Closed Length: 130mm.
Overall length: 240mm.
Thick when closed: 17mm.
Balancing: -
Weight: 170g.
Lock: Liner Lock
Clip: Removable, titanium
Sheath: -
Packaging: cardboard box
Notes: Design by William W. Harsey1328D -
Fantoni - William W. Harsey HB 02 Desert - knife
Intended Use: Tactical / Sports
Type of production: Industrial
Production Blade: Italy
Blade: CPM-S30V steel 60/61HRC
Blade Treatment: Stone Washed
Handle: Titanium and G-10
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 100mm.
Total length: 180mm.
Thick when closed: 15mm.
Balance: -
Weight: 88g.
Lock: Liner Lock
Clip: Removable, titanium
Sheath: -
Packaging: cardboard box
Notes: Design by William W. Harsey1327D -
Helle Norway - Dovre - No.170 coltello
Destinazione d'uso: caccia
Tipo di produzione: industriale
Lama: in acciaio laminato con guance inox 18/8 e tagliente inox 59HRC
Trattamento Lama: -
Manicatura: Betulla e Corian
Lunghezza lama: 70mm.
Spessore della lama: 3mm.
Lunghezza chiuso: -
Lunghezza totale: 170mm.
Bilanciatura: arretrata a 2.5cm
Peso: 58g.
Chiusura: -
Clip: -
Fodero: cuoio
Note: -HE-170 -
Helle Norway - Fjellkniven knife - No.4 knife
Destination of use: hunting
Type of production: industrial
Blade: iin rolled steel with 18/8 stainless steel cheeks and 59HRC stainless steel cutting edge
Blade treatment: -
Handle: Birch
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: -
Total length: 210mm.
Balancing: set back to 2.5cm
Weight: 108g.
Closure: -
Clip: -
Sheath: leather
Note: -HE-4 -
Helle Norway - Harding - No.99 coltello
Destinazione d'uso: caccia/sportivo
Tipo di produzione: industriale
Produzione Lama: Norvegia
Lama: in acciaio laminato con guance inox 18/8 e tagliente inox 59HRC
Trattamento Lama: -
Manicatura: legno di betulla, palissandro ed anelli di cuoio
Lunghezza lama: 99mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: -
Lunghezza totale: 215mm.
Spessore da chiuso: -
Bilanciatura: arretrata, a 1cm.
Peso: 102g.
Chiusura: -
Clip: -
Fodero: in cuoio marrone
Confezione: astuccio cilindrico di cartone più panno in cotone marchiato Helle
Note: -HE-99 -
Helle Norway - Nying - No.55 coltello
Destinazione d'uso: caccia
Tipo di produzione: industriale
Lama: in acciaio laminato con guance inox 18/8 e tagliente inox 59HRC
Trattamento Lama: -
Manicatura: Betulla
Lunghezza lama: 70mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: -
Lunghezza totale: 165mm.
Bilanciatura: arretrata a 2.5cm
Peso: 82g.
Chiusura: -
Clip: -
Fodero: cuoio
Note: -HE-55 -
Helle Norway - Veidemann - No.53 knife
Intended Use: Hunting
Type of production: industrial
Production Blade: Norway
Blade: rolled steel cheeks with 18/8 stainless steel 59HRC and sharp
Treatment Lama: -
Handle: Birch wood
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: -
Total length: 193mm.
Thick when closed: -
Balance: backward, to 1.5cm.
Weight: 98g.
Closing: -
Clip: -
Sheath: Brown leather
Packaging: cylindrical cardboard case more cotton cloth marked Helle
Notes: -HE-53 -
Helle Norway - Wind knife - No.180 knife
Destination of use: hunting
Type of production: industrial
Blade: in stainless steel with 18/8 stainless steel and 59HRC stainless steel edge
Blade treatment: -
Handle: Birch
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: -
Total length: 220mm.
Balancing: set back to 2.5cm
Weight: 96g.
Closure: -
Clip: -
Sheath: leather
Note: -HE-180