Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Fox - Trakker - Sniper Knife - FX-9CM01B
Intended Use: Tactical / Utility
Type of production: industrial
Blade: Stainless steel N690Co 58/60HRC
Treatment Blade: Foxionic to 72/75HRC UNI 5478:1999
Production Blade: Italy
Handle: Forprene
Blade length: 150mm.
Blade thickness: 6mm.
Length closed: -
Total length: 280mm.
Balance: advanced to 1.5cm. the branch of lower guard
Weight: 310g.
Closing: -
Clip: -
Sheath: Cordura 1100D black multi MOLLE system
Notes: -FX-9CM01B -
Fox - Bushman Knife - V-TOKU2 SanMai steel - Special Edition - CO-609OD - knife
Japanese steel blends with Italian excellence
For this 2021 collaboration, between the Collini Cutlery of Busto Arsizio and the Fox of Maniago, we have decided to propose the 609OD Bushman model, an excellent bushcraft knife produced by Fox of Maniago, using Japanese V-Toku2 steel in Sanmai. produced by Japanese Takefu Steel instead of the D2 used in the production model.
Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of re-sharpening. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of external steel and by the laminated structure.
Technical features
Intended use: bushcraft - outdoor - collection
Type of production: Industrial
Production Lama: Italy
Blade: fulltang, in Japanese laminated steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and external SUS410 (stainless steel) scales
Blade treatment: satin
Handle: micarta
Blade length: 160mm.
Blade thickness: 5mm.
Total length: 290mm.
Thick when closed: -
Balancing: advanced
Weight: 369g.
Sheath: in leather, belt, ambidextrous, for horizontal or vertical carrying
Packaging: cardboard box with Fox logos
Bevel: flat with scandi-like sharpening, convex
Notes: Special and limited edition - since the cutting edge is made of carbon steel it is advisable, in order to keep the blade in perfect condition, to protect the edge with a light surface of oil.
As in the ancient Japanese Samurai swords.The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
FX-609ODCC -
Fox - Forest knife 604 - Fixed Blade Micarta - knife
Intended use: Hiking
Type of production: Industrial
Country of production: Italy
Blade: full tang in steel 440
Blade treatment: -
Handle: Micarta
Blade length: 155mm.
Blade thickness: 4mm.
Total length: 285mm.
Balancing: on the guard branch
Weight: 258g.
Sheath: leather, belt, ambidextrous, for vertical port
Packaging: cardboard box with Fox logos
Note: -604M -
Fox - Sputnik 13 - FKMD FX-813B - knife
Intended use: Utility / Sub
Type of production: Industrial
Production Lama: Italy
Blade: Stainless Steel N690Co 58 / 60HRC
Treatment Lama: Black CeraKote based nano-ceramic
Handle: thermoplastic rubber TPR
Blade length: 153mm.
Blade thickness: 5mm.
Overall length: 277mm.
Weight: 245g.
Sheath: FRN and 1000D Nylon MOLLE compatible
Packaging: cardboard box with logos Fox FKMD
Note: Break glass in stainless steel 420, with interchangeable aluminum cap included in the package. Developed in collaboration with MemoTek12296 -
Fox - Spear Tech Combat FX-0171112 - coltello tattico
Destinazione d'uso: Tattico/Utility/Collezione
Tipo di produzione: industriale
Lama: in acciaio inox N690Co 58/60HRC Full Tang
Trattamento Lama: Foxionic a 72/75HRC UNI 5478:1999
Produzione Lama: Italia
Manicatura: G10
Lunghezza lama: 155mm.
Spessore della lama: 6mm.
Lunghezza totale: 290mm.
Bilanciatura: sul ramo di guardia
Peso: 330g.
Fodero: Polimeri e cordura con attacchi molle
Note:7745 -
Fox / Hill Knives - Afghanistan Memorial Knife - AMK-279 - knife
Intended Use: Tactical / Collection
Production Type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade Finish: Hard ceramic coated
Handle: G10
Blade length: 150mm.
Blade thickness: 6.3mm.
Total length: 279mm.
Weight: 220g.
Scabbard: Kydex, with MOLLE clip
Package: Cardboard box / display with ISAF and Fox Knives symbols and logos
Notes: Designed by Hill Knives7738