Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Typology: withdrawn by private individual
* Condition: in excellent condition
* Available on the market: discontinued since 2015
* Sharpening: factory sharpening
* Marks on the blade: small marks on the tip caused by the extraction from the sheath
* Marks on the handle: no marks
* Box: original Fox box
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory Coltelleria Collini

ST3-F is a knife studied and designed by the head instructor Paolo Bozzo of TEAM SURVIVAL (survival and survival school).
This project was developed through years of direct experience in the field.

Intended use: Survival / Utlity

Type of production: Industrial
Production Lama: Italy
Blade: N690Co stainless steel
Blade treatment: Black Teflon
Handle: Green Canvas Micarta
Blade length: 220mm.
Blade thickness: 6mm.
Total length: 360mm.
Balance: Advanced to 2.5cm. from the guard branch
Weight: 552g.
Sheath: in cordura with molle attachments
Packaging: cardboard box with Fox logos
Notes: designed by Paolo Bozzo

Knife out of production and no longer available, from a private collection, previously used, re-sharpened and with signs of wear on the finish of the blade and the sheath - Overall in good condition, previously used, still has a very good sharpness and shows some signs of wear on the finish of the blade - Handle in perfect condition - The sheath shows visible signs of wear but does not affect in any way the functionality, use or portability - Accompanied by original cardboard box - Checked and guaranteed by our internal laboratory.

Intended Use: Tactical / Hiking

Type of production: industrial
Blade: Stainless steel N690Co 58/60HRC
Country of production: Italy
Handle: in forprene, removable
Blade length: 220mm.
Blade thickness: 6mm.
Total length: 357mm.
Balance: advanced, at 45mm from the lower guard branch
Weight: 380g.
Sheath: Cordura 1000D OD Green, MOLLE compatible
Notes: Foxionic surface treatment at 72/75HRC

Japanese steel blends with Italian excellence

For this 2021 collaboration, between the Collini Cutlery of Busto Arsizio and the Fox of Maniago, we have decided to propose the 609OD Bushman model, an excellent bushcraft knife produced by Fox of Maniago, using Japanese V-Toku2 steel in Sanmai. produced by Japanese Takefu Steel instead of the D2 used in the production model.

Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of re-sharpening. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of external steel and by the laminated structure.

Technical features

Intended use: bushcraft - outdoor - collection
Type of production: Industrial
Production Lama: Italy
Blade: fulltang, in Japanese laminated steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and external SUS410 (stainless steel) scales
Blade treatment: satin
Handle: micarta
Blade length: 160mm.
Blade thickness: 5mm.
Total length: 290mm.
Thick when closed: -
Balancing: advanced
Weight: 369g.

Sheath: in leather, belt, ambidextrous, for horizontal or vertical carrying
Packaging: cardboard box with Fox logos
Bevel: flat with scandi-like sharpening, convex
Notes: Special and limited edition - since the cutting edge is made of carbon steel it is advisable, in order to keep the blade in perfect condition, to protect the edge with a light surface of oil.

As in the ancient Japanese Samurai swords.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Intended use: Hiking

Type of production: Industrial
Country of production: Italy
Blade: full tang in steel 440
Blade treatment: -
Handle: Micarta
Blade length: 155mm.
Blade thickness: 4mm.
Total length: 285mm.
Balancing: on the guard branch
Weight: 258g.
Sheath: leather, belt, ambidextrous, for vertical port
Packaging: cardboard box with Fox logos
Note: -

Intended use: Utility / Sub

Type of production: Industrial
Production Lama: Italy
Blade: Stainless Steel N690Co 58 / 60HRC
Treatment Lama: Black CeraKote based nano-ceramic
Handle: thermoplastic rubber TPR
Blade length: 153mm.
Blade thickness: 5mm.
Overall length: 277mm.
Weight: 245g.
Sheath: FRN and 1000D Nylon MOLLE compatible
Packaging: cardboard box with logos Fox FKMD
Note: Break glass in stainless steel 420, with interchangeable aluminum cap included in the package. Developed in collaboration with MemoTek

A blade of Valyrian steel that Catelyn Stark recovered from the assassin sent to finish her son Bran. It was taken to King’s Landing by Lady Stark and shown to Petyr Baelish, who identified it as belonging to Tyrion Lannister. This adult collectible is officially licensed from HBO®'s hit series Game of Thrones® and is an edition strictly limited to 2500 pieces.

The Game of Thrones® Collection is a series of collectible weapons and armor painstakingly recreated from the actual props used on HBO®’s hit fantasy epic Game of Thrones®. The officially licensed collectibles are made from the highest quality materials and have been crafted with special attention to reproduce the authentic details found on the props.

This item is not a toy, please keep out of the reach of children. This replica is intended solely for display purposes as a collector's item. Official HBO Licensed Product © 2012 Home Box Office, Inc. All Rights Reserved. Game of Thrones is a trademark of Home Box Office, Inc. Produced under License by Jalic Inc.

Overall Length: 19.5"
Blade Length: 10"
Blade Material: High carbon damascus steel
Handle: Faux "dragon bone" grip with 24k gold plated metal parts. 
Plaque: Silkscreened wood with Game of Thrones® motif. 

New version 2014 with Foliage Green Micarta handle

ST3-F is a knife designed and drawn by chief instructor Paul Bozzo TEAM SURVIVAL (school of survival and survival).
This project was developed through years of direct experience in the field.

Intended Use: Survival / Utlity

Type of production: Industrial
Production Blade: Italy
Blade: Stainless Steel N690Co
Treatment Blade: Black Teflon
Handle: Canvas Micarta Green
Blade length: 220mm.
Blade thickness: 6mm.
Overall length: 360mm.
Balancing: Advanced 2.5 cm. the branch of guard
Weight: 552g.
Sheath: Cordura with soft attacks
Packaging: cardboard box with Fox logos
Note: designed by Paul Bozzo

Intended Use: Tactical / Collection

Production Type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade Finish: Hard ceramic coated
Handle: G10
Blade length: 150mm.
Blade thickness: 6.3mm.
Total length: 279mm.
Weight: 220g.
Scabbard: Kydex, with MOLLE clip
Package: Cardboard box / display with ISAF and Fox Knives symbols and logos
Notes: Designed by Hill Knives