Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Kai Japan - Shun Higonokami Personal Steak - DM5900 - Pocket steak knife
This beautiful folding knife is an extremely sought-after accessory, whether used as a gentleman's knife or as a personal steak knife.
The Higonokami style of knives was the very first produced in Japan, in fact it could already be found in 1896, during the Meiji period. One of the main features of the traditional Higo Nokami design is the protruding opening pin when the blade is closed, which allows the blade to be opened smoothly even with one hand.
Shun's Higo Nokami not only includes the traditional opening pin, but also makes improvements to the original design by also going to incorporate a Liner Lock type blade locking system to make the user experience more secure. A modern, thin and sharp VG10 stainless steel was also chosen, making the Higo Nokami perfect for use as a personal steak knife. The Pakkawood handle is enhanced by a central inlaid mosaic pin.
Series: SHUN
Usage: Steak knife, designed for use outside the home
Country of manufacture: Japan
Blade Length: 90mm
Total Length: 200mm
Handle Length: 120mm
Weight: 45g
Blade: VGMAX (VG-10) stainless steel at 61HRC, sharpened to 16° on each side
Handle: Packawood with inlaid mosaic pin and equipped with integrated Liner Lock type security systemDM-5900 -
Kai - Sharpening stone AP-0305 - Grit 400-1000 - knives accessories
Synthetic stone for sharpening with water. Double grain (400 and 1000).
Equipped with plastic support with liquid recovery tray and non-slip rubber feet.
Dimensions:
- only stone length 180 x width 60 x height 30 mm;
- with support length 250 x width 95 x height 55 mm.Quality level: high
AP-0305 -
Kai - Whetstone AP-0304 - Grain 3000 - accessories knives
Pietra giapponese sintetica per affilare ad acqua. Grana fine (3000). Dotata di supporto in plastica con vaschetta di recupero liquidi e piedini antiscivolo in gomma.
Dimensioni:
- solo pietra lunghezza 180 x larghezza 60 x altezza 15 mm;
- con supporto lunghezza 250 x larghezza 95 x altezza 40 mm.
Livello qualitativo: elevatoAP-0304 -
Sergio Consoli - Folder Damascus Spirograph - Timascus and bronze Handle - N ° 454 - handcrafted knives
Intended use: Collection
Type of production: Artisan by CIC Master Sergio Consoli
Production Lama: Italy
Blade: In spirograph damascus steel
Blade treatment: -
Handle: bronze bolsters, timascus with titanium spacers
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 225mm.
Weight: 243g.
Closure: Liner Lock
Clip: titanium
Notes: Handmade by Master Sergio Consoli - knife number 454 made in 2018Acknowledgments
Currently I make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:
in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded as "best table on display"
always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"
I was also ranked second in the competition organized by the magazine LAME D'AUTORE as the best fixed hunting blade
then in 2007 at "Scarperia" I won the third prize for best folding
but above all again in 2007, to my great satisfaction, I reached the degree of MASTER OF THE ITALIAN KNIVING CORPORATION, a recognition received at the first exam.
Presentation of the craftsman
Creating a knife by hand is what I consider a real art form.
The satisfaction of seeing an object that comes from one's own hands, that takes shape and reaches mechanical, artistic and aesthetic perfection is what pays me back the most for all the hours of work and effort it takes to create a knife completely. by hand.The passion for "cutting tools" has always been in me since I was a child and grew with me until the almost sudden decision to build my first knife myself, it was a "need", almost an inner necessity that I couldn't put off, my hands and my mind had to start creating, of course, what I had always been passionate about ... the knife!
I started at 40, in 2003, practically self-taught, I had no experience of manual work, but I had been a mechanical designer for many years and this allowed me to perfectly know the technique and all the various stages of mechanical processing.
Currently I am a member, with the rank of Master, which is the highest, of the Italian Knives Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.
What I do now is what I consider my art form ..., to create "handcrafted, hunting and collectible knives".
They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
I mainly make folding knives, which satisfy my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they are not seen, is what distinguishes a knife created by hand, from one made industrially .The mechanics then must be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.
Of course, over the years I have refined my technique and currently I have improved the mechanics even more by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction. and with an incredible sweetness.
With regard to the blades then, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow an exceptional edge hold and cutting quality for all types of use.
I make practically all the knives on an initial design of mine, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "artisanal".
Regarding the materials I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damascus, both stainless steel and carbon, for the uniqueness 'that give the knife, since each damask is always different from another.
For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of wonderful colors, I also use fossil mammoth ivory, various briars, titanium and carbon fiber.
Most of the knives, however, are made entirely of steel, in order to then be engraved, always and strictly by hand, to transform the knife even more into a real work of art ...
SC-454€0.00Only -50 leftOut of stock -
Kai - Stone for grinding AP-2455 - grit 80 - accessories for knives
The stone for grinding AP-2455 is equipped with a grain 80, the best tool to smooth depressions or protuberances on the surface of the stones, of the compact choruses and to round off the irregular edges.
Country of production: Japan
Dimensions: 17 x 6 x 1.7 cm
Grain: # 80AP-2455 -
Kai - Polishing Strop Set - 45035020 - leather strop and polishing paste
High quality set for maintenance of razors, knives and gouges.
Composed by:
- Strop, wooden support covered with leather (thickness 2.5 mm) on both sides, size: 340x40x17 mm, weight 138 gr .;
- Polishing paste.
Especially recommended for Kai Shun and Magoroku Composite kitchen knives.
CORAM-215 -
Kai - multipurpose keychain - K-7003 - 70s vintage knife
Intended use: key chain / collection
Type of Industrial Production
Blade: stainless steel 420
Production Country: Japan
Handle: Steel plated gold and Chinese lacquer red cinnabar
Blade length: 37mm.
Blade Thickness: 1.5mm.
Overall length: 91mm.
Closed Length: 54mm.
Closing system: -
Weight: 36g.
Chain and key ring: Brass
Packaging: in brown velvet box with logos Kai Cutlery
Notes: very rare product in the late '70s, brand new, in perfect condition12577 -
Valyrian Steel - Catspaw VS0102 Blade - Game of Thrones Game of Thrones
A blade of Valyrian steel that Catelyn Stark recovered from the assassin sent to finish her son Bran. It was taken to King’s Landing by Lady Stark and shown to Petyr Baelish, who identified it as belonging to Tyrion Lannister. This adult collectible is officially licensed from HBO®'s hit series Game of Thrones® and is an edition strictly limited to 2500 pieces.
The Game of Thrones® Collection is a series of collectible weapons and armor painstakingly recreated from the actual props used on HBO®’s hit fantasy epic Game of Thrones®. The officially licensed collectibles are made from the highest quality materials and have been crafted with special attention to reproduce the authentic details found on the props.
This item is not a toy, please keep out of the reach of children. This replica is intended solely for display purposes as a collector's item. Official HBO Licensed Product © 2012 Home Box Office, Inc. All Rights Reserved. Game of Thrones is a trademark of Home Box Office, Inc. Produced under License by Jalic Inc.
Overall Length: 19.5"
Blade Length: 10"
Blade Material: High carbon damascus steel
Handle: Faux "dragon bone" grip with 24k gold plated metal parts.
Plaque: Silkscreened wood with Game of Thrones® motif.VS0102€409.02Out of stock -
Sergio Consoli - N°098 Folding Walnut - Custom Knife
Blade: 61HRC RWL34 Stainless Steel
Handle: Walnut, Damascus and Titanium
Blade Lenght: 75mm.
Blade Thickness: 4mm.
Overall Lenght: 180mm.
Weight: 110g.
Lock: Liner lock
Clip: -
Sheath: -
Notes: Handmade in Italy by CIC Master Sergio Consoli9015€729.51Out of stock -
Fox/Combative Edge - M1 Plain - CED-01 - coltello
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co 58HRC
Trattamento Lama: DLC
Manicatura: G-10 e titanio
Lunghezza lama: 95mm. filo liscio
Spessore lama: 4mm.
Lunghezza chiuso: 130mm.
Lunghezza totale: 225mm.
Spessore da chiuso senza clip: 10mm.
Bilanciatura: -
Peso: 152g.
Chiusura: Frame Lock
Clip: in acciaio inox
Fodero: -7728 -
Fox/Combative Edge - Salus - FX-CED-M2 - coltello
Destinazione d'uso: Tattico/Militare
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: full tang, in acciaio inox N690Co
Trattamento Lama: Ti-Ni
Manicatura: G-10
Lunghezza lama: 150mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 275mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 304g.
Chiusura: -
Clip: -
Fodero: Kydex e Nylon
Confezione: Scatola di cartone con loghi Fox
Note:7743 -
Fox/Combative Edge - SR11 Plain - FX-CED-M3 coltello
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co 58HRC
Trattamento Lama: DLC
Manicatura: G-10 e Titanio
Lunghezza lama: 95mm
Spessore lama: 4mm.
Lunghezza chiuso: 122mm.
Lunghezza totale: 212mm.
Spessore da chiuso senza clip: 10mm.
Bilanciatura: -
Peso: 144g.
Chiusura: Frame Lock
Clip: in acciaio inox
Fodero: -7741 -
Fox/Combative Edge - SR11S Serrated - FX-CED-M3S - coltello
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co 58HRC
Trattamento Lama: DLC
Manicatura: G-10 e Titanio
Lunghezza lama: 95mm
Spessore lama: 4mm.
Lunghezza chiuso: 122mm.
Lunghezza totale: 212mm.
Spessore da chiuso senza clip: 10mm.
Bilanciatura: -
Peso: 144g.
Chiusura: Frame Lock
Clip: in acciaio inox
Fodero: -7741S -
Kai - Whetstone DM-0600 - Grain 6000/1000 - knives accessories
Kai - Whetstone DM-0600 - Grain 6000/1000 - knives accessories
Japanese synthetic stone for sharpening water. Double Grain: fine (6000) and medium / fine (1000).
Stone Size: 185 (length) x 65 (width) x 30 (height) mm.
Dimensions rubber backing: 198 (length) x 70 (Width) mm
Weight: 752 gr. (812 gr. With stand)Quality level: high
DM-0600