Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Spartan Blades - Talos Liner Lock knife - Black - Harsey Design - SFBL7BK - kitchen knife
The TALOS Folder is a lightweight folding knife with a liner lock, designed by our friend and collaborator William W. Harsey Jr. Its slim and lightweight design makes it the perfect companion for everyday carry and daily tasks. Despite its small size, thanks to its thoughtful design, high-quality CTS-XHP blade, and deep pocket clip, it handles most daily tasks with ease. Whether you're wading through a trout-rich stream or on your way to work, this little knife is ideal.
All our Bronze (Field) grade folding knives incorporate our new "Oil Infused Bronze Bearing System" or "OIBBS". Our sintered bronze bearings are oil-infused, thus reducing friction on the blade, giving you a tight but smooth blade opening. This system is particularly useful for slow speeds, intermittent use, and irregular loads like those found on folding knives.
Intended use: Collection / Sports
Type of production: MidTech
Country of production: Taiwan
Blade: in CTS-XHP steel
Blade treatment: stone wash
Handle: G-10
Blade length: 80mm.
Blade thickness: 3.2mm.
Closed length: 100mm
Total length: 183mm.
Weight: 66g.
Closure: Liner Lock
Clip: in steel
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William HarseySFBL7BK -
Spartan Blades - Poros knife - G10 Green - 154CM - SFL11GR - knife
The POROS flipper was designed by Curtis Iovito as a robust and large-sized flipper. The high grind lines of this blade, combined with a sharp and penetrating tip, make it a reliable companion for everyday carry.
Its quick flipper action is assisted by IKBS bearings for that "Snap" you're looking for! Its distinctive scallops are not only beautiful to look at but also ensure a secure grip. The deep pocket clip maintains a low profile while keeping your blade ready for use when needed. The blade is made of 154CM stainless steel with a black titanium nitride coating; the SS hardware and liner have a black electroplated powder coating.
Intended use: Sports
Type of production: Industrial
Country of production: Taiwan
Blade: in 154CM stainless steel 58/60 HRC
Blade treatment: Black Titanium Nitride Coating
Handle: OD Green G10
Blade length: 89mm.
Blade thickness: 4mm.
Closed length: 97mm
Total length: 230mm.
Weight: 147g.
Closure: Liner Lock
Clip: in stainless steel, removable and reversible
Packaging: cardboard box with Spartan Blades logos. Design: Curtis Iovito
Notes: The Field Grade series with Bronze-colored box identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.SFL11GR -
Spartan Blades - Astor by Les George - Carbon FIber & CTS-XHP - SFBL8CF - knife
The ASTOR is our first folding knife in collaboration with prolific knife maker Les George, winner of Blade Show 2021 as "Imported Knife of the Year."
The ASTOR was built as a sturdy working knife! With its sturdy G-10 grips, thick liner-lock and high-strength CTS-XHP steel blade, the ASTOR is the perfect knife for those jobs that require a little extra toughness.
All of our Bronze Field Grade productions incorporate our new "Oil Infused Bronze Bushing System" or "OIBBS"! Our sintered bronze bushings are impregnated with oil, which reduces friction on the blade, thus ensuring that the blade opens smoothly, even when firmly held. This system is especially useful for low speeds, intermittent use and irregular loads such as those found on folding knives.
Intended Use: Sporting
Production type: Industrial
Country of manufacture: Taiwan
Blade: CTS-XHP 58/60 HRC stainless steel
Blade treatment: Stonewashed
Handle: Composite made of G10 and Carbon Fiber
Blade Length: 89mm.
Blade thickness: 4mm.
Length closed: 118mm.
Total length: 209mm.
Weight: 145g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Spartan Blades logos
Notes: The Field Grade series with Bronze-colored box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series one can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.SFBL8CF -
Spartan Blades - Astor by Les George - Green G10 & CTS-XHP - SFBL8GR - knife
The ASTOR is our first folding knife in collaboration with prolific knife maker Les George, winner of Blade Show 2021 as "Imported Knife of the Year."
The ASTOR was built as a sturdy working knife! With its sturdy G-10 grips, thick liner-lock and high-strength CTS-XHP steel blade, the ASTOR is the perfect knife for those jobs that require a little extra toughness.
All of our Bronze Field Grade productions incorporate our new "Oil Infused Bronze Bushing System" or "OIBBS"! Our sintered bronze bushings are impregnated with oil, which reduces friction on the blade, thus ensuring that the blade opens smoothly, even when firmly held. This system is especially useful for low speeds, intermittent use and irregular loads such as those found on folding knives.
Intended Use: Sporting
Production type: Industrial
Country of manufacture: Taiwan
Blade: CTS-XHP 58/60 HRC stainless steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 118mm.
Total length: 209mm.
Weight: 145g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Spartan Blades logos
Notes: The Field Grade series with Bronze-colored box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series one can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.SFBL8GR -
Spartan Blades - Talos Liner Lock knife - Green - Harsey Design - SFBL7GR - kitchen knife
The TALOS Folder is a lightweight folding knife with a liner lock, designed by our friend and collaborator William W. Harsey Jr. Its slim and lightweight design makes it the perfect companion for everyday carry and daily tasks. Despite its small size, thanks to its thoughtful design, high-quality CTS-XHP blade, and deep pocket clip, it handles most daily tasks with ease. Whether you're wading through a trout-rich stream or on your way to work, this little knife is ideal.
All our Bronze (Field) grade folding knives incorporate our new "Oil Infused Bronze Bearing System" or "OIBBS". Our sintered bronze bearings are oil-infused, thus reducing friction on the blade, giving you a tight but smooth blade opening. This system is particularly useful for slow speeds, intermittent use, and irregular loads like those found on folding knives.
Intended use: Collection / Sports
Type of production: MidTech
Country of production: Taiwan
Blade: in CTS-XHP steel
Blade treatment: stone wash
Handle: G-10
Blade length: 80mm.
Blade thickness: 3.2mm.
Closed length: 100mm
Total length: 183mm.
Weight: 66g.
Closure: Liner Lock
Clip: in steel
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William HarseySFBL7GR -
Spartan Blades - Spartan-Ka-Bar - FDE MagnaCut & Leather - SB54DEBKLTBK - knife
On December 9, 1942, during the Second World War, KA-BAR presented a knife to the United States Marine Corps hoping it would become the standard weapon. In collaboration with the Marine Supply Department, the project was revised, and production began on an improved combat and utility knife.
During the war, USMC KA-BAR knives gained such recognition for their quality and abundance that "KABAR" became the common name. It was adopted by the Marines, Army, Navy, Coast Guard, and Underwater Demolition Teams. Years later, many KA-BAR knives were reactivated in Korea, Vietnam, Desert Storm, and the wars in Iraq and Afghanistan.
In 2019, KA-Bar partnered with Spartan Blades to form Pineland Cutlery. CEO John Stitt aimed to create a "KA-BAR" with improved strength, robustness, and corrosion resistance. During development, metallurgist Larrin Thomas identified CPM MagnaCut® steel with the desired qualities.
CPM MagnaCut® is a sintered high-carbon steel produced by Crucible Industries and specifically designed for blades. Spartan Blades developed the Spartan-KA-BAR using CNC machining, cryogenic treatment, and PVD coatings.
Intended Use: Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: CPM MagnaCut steel 61/63HRC
Blade Finish: ZrN Flat Dark Earth
Handle: Kraton G with stainless steel 301 guard and tungsten DLC treatment
Blade Length: 178mm.
Blade Thickness: 4.2mm.
Total Length: 305mm.
Weight: 306g.
Sheath: Black leather
Packaging: Cardboard box with Spartan Blades logos
Notes: Please note that the Flat Dark Earth (FDE) coated blade, when inserted or removed from the leather sheath, may show streaks or stains due to the dye used for the sheath. The blade can be cleaned with petroleum or acetone, re-oiled (e.g., with WD40 or light mechanical oil), and dried with a clean cloth to restore the original coating finish.SB54DEBKLTBK -
Spartan Blades - Spartan-Harsey Fighter - SBSL006BK - Knife
Produced in Olean, NY, in collaboration with the skilled people at KA-BAR knives, the Spartan-Harsey Fighter is born from the partnership between William W. Harsey Jr. and Spartan Blades. The intention behind this knife was to combine the blade of a US military combat/utility knife with the contoured handle that has become a hallmark of Mr. Harsey's designs. This knife is a no-nonsense combat blade.
Intended Use: Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: 1095 carbon steel 56/58HRC
Blade Finish: Black Powder Coating
Handle: Injection-molded Thermoplastic
Blade Length: 155mm
Blade Thickness: 4.9mm
Overall Length: 292mm
Weight: 334g
Sheath: Thermoplastic, with belt attachment and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by William W. Harsey Jr. - The Professional Grade series with Silver packaging identifies American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with Ka-Bar's production experience to keep prices affordable for the public without sacrificing USA-made production.SBSL006BK -
Spartan Blades - Machai knife Green - Fixed Blade Pro Grade- SBSL002BKGR - Knife
Machai - A fitting name for this large cutting tool. In Greek mythology, the Machai were the demons (spirits) of battle and combat.
The high weight and recurved profile of this flat ground blade make it an excellent hatchet. The Machai has a full-tang construction and a handle that ensures a forward balance in the user's hand.
The textured Micarta canvas ergonomic handle ensures a secure and comfortable grip, whether wet or dry. Made by the good people at KA-BAR Knives; in Olean, NY, USA.
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: in 1095 carbon steel 56/58HRC
Blade finish: Black Powder Coating
Handle: CE Canvas Micarta
Blade length: 165mm.
Blade thickness: 4.8mm.
Total length: 295mm.
Weight: 308g.
Sheath: Thermoplastic, multi-position, with M.O.L.L.E compatible belt attachments and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by Iovito - The Professional Grade series with a Silver-colored box identifies American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with the production experience of Ka-Bar to keep public prices affordable without having to give up a made in USA production.SBSL002BKGR -
Spartan Blades - Harsey TT - Kydex, Flat Dark Earth and Camo Micarta - SB43DECMKYTN - knife
The Harsey TT (Tactical Trout) is designed to be a very comfortable and sturdy medium-sized knife for most field tasks and defensive use. The size of the TT makes it easy to carry and handle.
The blade profile provides a clean cut with excellent tip strength. The full tang and handle of the Harsey TT provide neutral balance in the user's hand. The ergonomically shaped, linen Micarta handle provides a comfortable and secure grip when dry or wet. The pommel has a lanyard hole in the center of the angled tip. The TT is an excellent universal fixed blade, well balanced in size, function and feel. In our opinion, one of William Harsey's best designs.
After more than 40 years of service in the U.S. Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had already been designing and drawing knives for his friends in the Special Forces for years, and Mark, who had always been involved in military and tactical equipment when he served in the "Green Berets," decide to combine their skills and passion with the goal of building innovative and functional knives using the highest quality materials and made entirely in the United States.
Intended Use: Tactical/Military
Production Type: Mid Tech
Country of Production: USA
Blade: stainless steel CPM-S45VN 59/61HRC
Blade finish: ZrN Flat Dark Earth
Handle: Linen Micarta
Blade length: 114mm.
Blade thickness: 4.8mm.
Total length: 229mm.
Balance: on the guard branch
Weight: 209g.
Sheath: thermoformed in Kydex
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William HarseySB43DECMKYTN -
Spartan Blades - Harsey Folder - 3.25" Chad Nichols Damascus Blue Anodization - knife
This is the latest knife produced in terms of time by Spartan Blades in collaboration with legendary knife maker William "Bill" Harsey Jr.
The SHF 3.25 is the knife many of you have been waiting for! A reliable 6AL4V titanium frame-lock pocket knife with a handcrafted 3.25" damascus steel blade made by Chad Nichols. Easy to carry and comfortable in the hand, this is a truly exceptional knife. Constructed like its award-winning big brother the SHF 3.25 is made entirely of 6AL-4V titanium, except for the pivot, blade and arbor.
This medium-sized folding knife features a reversible pocket clip and two thumb studs that allow it to be carried in either the right or left hand. If you are looking for a high-quality, well-designed folding knife, this is one you should consider!
Intended Use: Collector/Sportsman
Type of manufacture: MidTech
Country of manufacture: USA
Blade: handcrafted stainless damascus steel, by Chad Nichols
Blade treatment: -
Handle: titanium 6AL4V
Blade length: 82.5mm.
Blade thickness: 3.2mm.
Length closed: 98.5mm.
Total length: 181mm.
Weight: 82g.
Closure: FrameLock
Clip: anodized titanium
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William HarseySF10CNBL -
Spartan Blades - Moros Knife - Kydex, DLC Flat Black and Black Micarta - SB53BKBKKYBK - knife
The Moros is an excellent choice for field or tactical use. This well-balanced blade is the perfect blend of size and performance. It's light enough to carry around without hassle, yet sturdy enough to handle a range of everyday tasks. The tip profile is flat with a tapered upper edge ensuring excellent cutting with good penetrating force. The full tang and grip of the Moros provide a neutral balance, making it light in the hand. The ergonomic and textured Micarta canvas grip ensures a comfortable and secure grip whether dry or wet.
After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had been designing and drawing knives for friends in special forces for years, and Mark, who had always dealt with military and tactical equipment while working in the "Green Berets," decided to combine their skills and passion with the goal of building innovative and functional knives using high-quality materials and entirely made in the United States.
Intended use: Tactical/Military
Type of production: Mid Tech
Country of production: USA
Blade: in CPM-S45VN stainless steel 59/61HRC
Blade finish: PVD Tungsten DLC Flat Black
Handle: Canvas Micarta
Blade length: 134mm.
Blade thickness: 4.8mm.
Total length: 254mm.
Balance: on the guard branch
Weight: 203g.
Sheath: thermoformed in Kydex
Packaging: Cardboard box with Spartan Blades logosSB53BKBKKYBK -
Spartan Blades - Moros - Kydex, DLC Flat Black and Green Micarta - SB53BKGRKYBK - knife
The Moros is an excellent choice for field or tactical use. This well-balanced blade is the perfect blend of size and performance. Light enough to carry without bothering, yet strong enough to handle a variety of daily tasks. The tip profile is flat with a tapered top edge that provides an excellent cut with good penetration force. The Moros' solid tang and handle provide neutral balance, making it light in the hand. The ergonomic, textured Micarta canvas handle provides a comfortable and secure grip when dry or wet.
After more than 40 years of service in the U.S. Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had already been designing and drawing knives for his friends in the Special Forces for years, and Mark, who had always been involved in military and tactical equipment when he served in the "Green Berets," decide to combine their skills and passion with the goal of building innovative and functional knives using the highest quality materials and made entirely in the United States.
Intended Use: Tactical/Military
Production Type: Mid Tech
Country of Production: USA
Blade: stainless steel CPM-S45VN 59/61HRC
Blade Finish: PVD Tungsten DLC Flat Black
Handle: Canvas Micarta
Blade length: 134mm.
Blade thickness: 4.8mm.
Total length: 254mm.
Balance: on the guard branch
Weight: 203g.
Sheath: thermoformed Kydex.
Packaging: cardboard box with Spartan Blades logos
Notes: Design by Curtis IovitoSB53BKGRKYBK -
Tops - Lil Roughneck knife - Tan Canvas Micarta - LRNK-01 - Knife
This is the strongest (thickest) knife we've ever made. The strength of this 3/8" thick piece of 5160 spring steel is impressive. It has a full handle, covered in tan burlap Micarta grips.
As the name suggests, the 'Lil Roughneck' is very similar to the tough dudes who do the hard, heavy work of oil rigs. The term Roughneck is now a commonly known term associated with rough and tough guys.
Roughnecks are strong-willed, hardworking, and keep on 'hanging in'. With that in mind... this is definitely a special knife for a special boy.
Knife Type: Fixed Blade
Total length: 15.88cm
Blade length: 6.99cm
Blade thickness: 0.965 cm
Blade shape: Hunter's tip
Blade steel: 5160 RC 56-58
Blade Finish: Black non-slip coating
Handle material: Tan canvas micarta
Knife weight: 289.17 g
Sheath Included: Yes
Sheath Material: Black Kydex
Sheath clip: Rotating spring steel
Designer: Leo EspinozaLRNK-01 -
Tops - CUMA Tak-Ri 3.5 - Tactical Kukri - Green Canvas Micarta - Knife
The CUMA Tak-Ri 3.5 is not your typical kukri. In fact, you have to understand what a Gurkha Kukri is to see the curve of its blade. The kukri (Devnagari/ खुकुरी), originally spelled khukri or khukuri, is a Nepalese curved knife. It is a traditional weapon of the Nepali people and also a weapon of choice/side arm for all Nepalis, including those serving in various armies around the world, but with the CUMA Tak-Ri we have gone further!
Once you have the CUMA Tak-Ri in your hands, you will quickly realize that it is "tough to the core." In fact, the Tak-Ri caused such a stir at the 2011 SHOT Show that Lou Ferrigno (the historic "Incredible Hulk") pre-ordered his directly at the TOPS Knives booth.
Intended Use: Hard Utility / Tactical
Type of Production: Semi-Industrial
Country of Manufacture: USA
Blade: full tang in 1095 58/60HRC steel
Blade Finish: Coyote Tan Coatung
Handle: Canvas Micarta
Blade Length: 178mm.
Blade thickness: 4.9mm.
Total length: 343mm.
Weight: 460g.
Scabbard: Nylon, belt-mounted, M.O.L.L.E. compatible.
Packaging: transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by certificate of guarantee and authenticityTPCUMATK35 -
Spartan Blades - Damysus Green - Professional Grade - SBSL003BKGR - Knife
Intended Use: Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: Carbon steel 1095 56/58HRC
Blade Finish: Black Powder Coating
Handle: CE Canvas Micarta
Blade Length: 139mm.
Blade Thickness: 4.8mm.
Total length: 273mm.
Weight: 255g.
Sheath: Thermoplastic, multi-position, with M.O.L.L.E. compatible belt clip and push-button retention system.
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Note: Design by Iovito/Carey - The Professional Grade series with Silver box, identifies the American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series you can find new products that combine the typical Spartan Blades designs with Ka-Bar's production experience in order to keep prices affordable to the public without having to renounce to a made in USA production.SBSL003BKGR -
Spartan Blades - Damysus Black - Professional Grade - SBSL003BKBK - Knife
Intended Use: Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: Carbon steel 1095 56/58HRC
Blade Finish: Black Powder Coating
Handle: CE Canvas Micarta
Blade Length: 139mm.
Blade Thickness: 4.8mm.
Total length: 273mm.
Weight: 255g.
Sheath: Thermoplastic, multi-position, with M.O.L.L.E. compatible belt clip and push-button retention system.
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Note: Design by Iovito/Carey - The Professional Grade series with Silver box, identifies the American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series you can find new products that combine the typical Spartan Blades designs with Ka-Bar's production experience in order to keep prices affordable to the public without having to renounce to a made in USA production.SBSL003BKBK -
Tops - Tahoma Field Knife - TAHO-01 - knife
Use: Heavy Utility
Production Type: Semi-Industrial
Production Lama USA
Blade: full tang steel 1095 58 / 60HRC
Treatment Lama: Black River Wash
Handle: Tan Canvas Micarta
Blade length: 213mm.
Blade thickness: 4.5mm.
Length closed: -
Overall length: 353mm.
Thick when closed: -
Balancing: -
Weight: 510g.
Closing: -
Clip: -
Sheath: Nylon, ABS with insert in and outside pocket multifunction
Pack a bag transparent plastic
Note: Emergency whistle - Design by Andy Tran12288 -
Zwilling - Twin Finishing Stone Pro - sharpening stone grit 3000/8000 - synthetic stone
Stone sharpens knives synthetic, water, double-sided, with non-slip base
The innovative and practical pan plexiglass firmly holds the stone and provides excellent stability and a high level of security during l'affilatura.
Grit: 3000/8000
Stone Size: 17.5x7.5x1cm
Support: Plexiglas with lid and supports slip32505-300 -
Zwilling - Twin Stone Pro - sharpening stone grit 250/1000 - synthetic stone
Stone sharpens knives synthetic, water, double-sided, with non-slip base
The innovative and practical pan plexiglass firmly holds the stone and provides excellent stability and a high level of security during l'affilatura.
Grit: 250/1000
Stone Size: 17.5x7.5x1cm
Support: Plexiglas with lid and supports slip32505-100 -
Tops - HOG 4.5 - TPHOG-4.5 - knife
Intended Use: Bushcraft / Utility
Production Type: Semi-Industrial
Production Lama USA
Blade: full tang steel 1095 58 / 60HRC
Treatment Lama: Black Traction Coating
Handle: Black Linen Micarta
Blade length: 120mm.
Blade thickness: 5mm.
Length closed: -
Overall length: 245mm.
Thick when closed: -
Balancing: backward to 2.5mm
Weight: 240g.
Closing: -
Clip: -
Sheath: Nylon, ABS with insert in and outside pocket multifunction
Pack a bag transparent plastic
Note: Emergency whistle - Each piece is numbered and accompanied by a certificate of authenticity and warranty12252 -
Tops - Tom Brown - The Tracker knife - TPT010 - knife
Intended use: Tactical / Military / Survival
Type of production: industrial seeds
Blade: 1095 58HRC carbon steel
Handle: Micarta
Blade length: 160mm.
Blade thickness: 6mm.
Length closed: - mm.
Total length: 302mm.
Balancing: coinciding with the lower guard branch
Weight: 585g.
Closure: -
Clip: -
Sheath: kydex, tactical with double multiposition clips
Notes: Design by Tom Brown, used in the movie The Hunted with Benicio Del Toro, entirely handmade in the USA, each knife is numbered and accompanied by a certificate of guarantee and authenticity.TPT010 -
Tops - Wolf Pup knife - knife
Tops - Wolf Pup knife - knife
Intended Use: Tactical/Military
Type of production: semi-industrial
Blade: full-tang 1095 carbon steel
Lama USA production
Handle: Gray micarta with white spacers
Blade length: 55mm.
Blade thickness: 3.5mm.
Closed length: -mm.
Total length: 130mm.
Balancing: -
Weight: 106g.
Closure: -
Clips: -
Sheath: Kydex with multi-position clip
Note:TOPS-5737 -
Zwilling - V-Edge Knife Sharpener Knife sharpeners
Zwilling - V-Edge Knife Sharpener
Knife sharpeners
The ZWILLING V-Edge pull-through knife sharpener quickly, simply and effortlessly sharpens European and Japanese knives at the correct angle to a standard of quality and sharpness comparable only to professional sharpening with a whetstone. The V-Edge combines the advantages of conventional pull-through knife sharpeners and whetstones. Simple to use, it delivers quick and excellent results. The V-shape arranged ceramic sharpening stones evenly sharpen the entire length of the blade without risk of damaging it. The knife sharpener comes with two pairs of ceramic sharpening rods: one set is coarse grain of around 150 grit for re-sharpening dull knives, the other is the medium-fine grain of around 360 grit for maintenance and honing. Spare replacement fine grain rods of around 1000 grit are available for very fine honing.
.Please note, this knife sharpener is not suitable for serrated blades.
Professional knife sharpener
Outstanding and reliable sharpening results
Easy to use
Angle adaptor swaps out for European and Japanese blades
Sharpens at approx. 15° per side for European blades
Sharpens at approx. 10° per side for Japanese blades
Includes pair of coarse grain sharpening rods of 150 grit
Includes pair of medium-fine grain sharpening rods of 360 grit
Diameter: 20 x 8 cm
Height: 21 cm
Weight: 1 kg
32605-000 -
Spartan Blades - Ronin Shoto Folder Karambit - CTS-XHP - SFBL9BK - knife
The Spartan-Ronin Shōtō is a folding karambit knife with a liner lock. This blade is the result of a collaborative effort between Spartan Blades and TU Lam of Ronin Tactics, our former Special Forces colleague and dear friend.
Having worked throughout Asia and in Indonesia, both Tu Lam and Spartan hold a great respect for the Karambit style. This blade was designed to be incorporated into various martial arts systems.
It features a blade made of CTS-XHP, "Emerson Wave" function for easy opening, and a reversible pocket clip for left-hand carry; the black and red G10 grips ensure a secure grip. Please check this link to Ronin Tactics HERE.
All our Bronze (Field) grade folding knives incorporate our new "Oil Infused Bronze Bearing System" or “OIBBS”. Our sintered bronze bearings are oil-impregnated, thereby reducing friction on the blade, offering you a tight but smooth blade opening.
Intended use: Collection / Sports
Type of production: Industrial
Country of production: Taiwan
Blade: in stainless steel CTS-XHP
Blade treatment: Satin Black Ti/Nitride Finish
Handle: G10
Blade length: 75mm.
Blade thickness: 3.2mm.
Closed length: 135mm
Total length: 200mm.
Weight: 179g.
Lock: Liner Lock
Clip: in steel
Packaging: cardboard box with Spartan Blades logos
Notes: The Field Grade series with Bronze-colored box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series one can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.SFBL9BK -
Spartan Blades - Spartan-Ka-Bar - DLC MagnaCut & Black Kydex - SB54BKBKKYBK - knife
On December 9, 1942, during the Second World War, KA-BAR presented a knife to the United States Marine Corps in the hope of it becoming the standard weapon. In collaboration with the Marine Supply Department, the project was revised and the production of an improved combat and utility knife began.
During the war, USMC KA-BAR knives became so renowned for their quality and abundance that "KABAR" became the common name. It was adopted by the Marines, Army, Navy, Coast Guard, and Underwater Demolition Teams. Years later, many KA-BAR knives were reactivated in Korea, Vietnam, Desert Storm, and the wars in Iraq and Afghanistan.
In 2019, KA-Bar joined forces with Spartan Blades to establish Pineland Cutlery. CEO John Stitt aimed to create a "KA-BAR" with enhanced strength, robustness, and corrosion resistance. During development, metallurgist Larrin Thomas identified CPM MagnaCut® steel with the desired qualities.
CPM MagnaCut® is a sintered high-carbon steel produced by Crucible Industries and specially designed for blades. Spartan Blades developed the Spartan-KA-BAR using CNC machining, cryogenic treatment, and PVD coatings.
Intended Use: Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: CPM MagnaCut steel 61/63HRC
Blade Finish: Tungsten DLC
Handle: Kraton G with stainless steel 301 guard and Tungsten DLC treatment
Blade Length: 178mm.
Blade Thickness: 4.2mm.
Total Length: 305mm.
Weight: 306g.
Sheath: Kydex, thermoformed, with belt loops and M.O.L.L.E. compatible
Packaging: Cardboard box with Spartan Blades logos
Notes: -SB54BKBKKYBK -
Spartan Blades - Spartan-Ka-Bar - FDE MagnaCut & Coyote Kydex - SB54DEBKKYTN - Knife
On December 9, 1942, during World War II, KA-BAR presented a knife to the United States Marine Corps, hoping it would become the standard weapon. In collaboration with the Marine Quartermaster Department, the project was revised, and production began on an improved combat and utility knife.
During the war, USMC KA-BAR knives gained such recognition for their quality and abundance that "KABAR" became the common name. It was adopted by the Marines, Army, Navy, Coast Guard, and Underwater Demolition Teams. Years later, many KA-BAR knives were reactivated in Korea, Vietnam, Desert Storm, Iraq, and Afghanistan conflicts.
In 2019, KA-Bar partnered with Spartan Blades to form Pineland Cutlery. CEO John Stitt desired a "KA-BAR" with enhanced durability, robustness, and corrosion resistance. During development, metallurgist Larrin Thomas identified CPM MagnaCut® steel with the desired qualities.
CPM MagnaCut® is a sintered high-carbon steel produced by Crucible Industries, specifically designed for blades. Spartan Blades developed the Spartan-KA-BAR using CNC machining, cryogenic treatment, and PVD coatings.
Intended Use: Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: CPM MagnaCut steel 61/63HRC
Blade Finish: ZrN Flat Dark Earth
Handle: Kraton G with stainless steel 301 guard and tungsten DLC treatment
Blade Length: 178mm.
Blade Thickness: 4.2mm.
Total Length: 305mm.
Weight: 306g.
Sheath: Kydex, thermoformed, with belt loops and M.O.L.L.E. compatible
Packaging: Cardboard box with Spartan Blades logos
Notes: -SB54DEBKKYTN -
Spartan Blades - Spartan-Harsey Nessmuk - SBSL005BK - Knife
Produced in Olean, NY, in collaboration with the skilled people at KA-BAR knives, the design of the Spartan-Harsey Nessmuk is based on a classic American concept popularized by George Washington Sears (1821-1890) and the more moderate ergonomic designs of William W. Harsey Jr.
Under the guidance of a Native American from the Narragansett tribe named Nessmuk, George Washington Sears embraced the natural world, learning survival skills. Sears adopted "Nessmuk," meaning "wood duck," as his pseudonym, reflecting his love for forest life. Writing as "Nessmuk," he contributed to Forest and Stream magazine in the 1880s, promoting canoeing, the Adirondack lakes, and environmentalism.
Sears' diverse experiences led to his writings on the wonders of nature and conservation. He advocated minimalism: lighting fires, setting up tents, and more. He emphasized respect for nature, leading to a call for conservation.
Sears authored "Woodcraft" (1884), offering practical advice and introspection. The "Log of the Bucktail" series and poetry followed. Illness couldn't weaken his love for nature. He passed away in 1890, with Nessmuk's legacy enduring in Wellsboro.
A supporter of thin and sharp knives, Sears' ideals are reflected in our Nessmuk design.
Intended Use: Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: 1095 carbon steel 56/58HRC
Blade Finish: Black Powder Coating
Handle: Injection-molded Thermoplastic
Blade Length: 130mm
Blade Thickness: 4.8mm
Overall Length: 254mm
Weight: 308g
Sheath: Thermoplastic, with belt attachment and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by William W. Harsey Jr. - The Professional Grade series with Silver packaging identifies American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with Ka-Bar's production experience to keep prices affordable for the public without sacrificing USA-made production.SBSL005BK -
Spartan Blades - Spartan-Harsey Kukri - SBSL007BK - Knife
Produced in Olean, NY, in collaboration with the skilled people at KA-BAR knives, the Spartan-Harsey Kukri knife has been designed to be a highly durable hiking knife. The kukri features a blade of over 22cm, making it an all-around tool due to its center of mass, allowing the user to slice while cutting to even penetrate thick objects.
While this blade is primarily famous for its military use, the kukri is more commonly employed as a multi-purpose tool in fields and homes across Nepal. Its uses range from construction, clearing, cutting firewood, digging, butchering animals for food, slicing meat and vegetables, skinning animals, to opening cans.
It can function as a smaller knife using the narrower part of the blade closer to the handle. The heavier and wider end of the blade, towards the tip, functions as a hatchet or a small shovel.
Intended Use: Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: 1095 carbon steel 56/58HRC
Blade Finish: Black Powder Coating
Handle: Injection-molded Thermoplastic
Blade Length: 223mm
Blade Thickness: 6.3mm
Overall Length: 352mm
Weight: 580g
Sheath: Thermoplastic, with belt attachment and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by William W. Harsey Jr. - The Professional Grade series with Silver packaging identifies American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with Ka-Bar's production experience to keep prices affordable for the public without having to sacrifice USA-made production.SBSL007BK -
Spartan Blades - Alala knife Green - Fixed Blade - SBSL004BKGR - Knife
Alala - In ancient Greece, it meant "battle cry" or "war cry" and was the personification of the war cry in Greek mythology. ... Greek soldiers attacked the enemy with this cry to cause panic in their ranks. Its sturdy and comfortable design makes it a very comfortable everyday carry fixed blade with excellent ergonomics. Perfectly suited for daily cutting tasks, it is always ready to assist the user. The molded sheath is equipped with an active retention lever and a securing strap for convenient carry options. Made by the excellent people at KA-BAR Knives; in Olean, NY, USA.
Intended use: Tactical / Military
Production type: Industrial
Country of production: USA
Blade: in 1095 carbon steel 56/58HRC
Blade finish: Black Powder Coating
Handle: CE Canvas Micarta
Blade length: 95mm.
Blade thickness: 4.8mm.
Total length: 200mm.
Weight: 135g.
Sheath: Thermoplastic, multi-position, with M.O.L.L.E compatible belt attachments and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by Iovito/Carey - The Professional Grade series with a silver-colored box identifies the American production made by Ka-Bar entrusted to Pineland Cutlery (a company founded by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with the production experience of Ka-Bar to keep public prices affordable without having to give up a made in the USA production.SBSL004BKGR -
Spartan Blades - Harsey Folder - 3.25" Chad Nichols Damascus Bronze Anodization - knife
This is the latest knife produced in terms of time by Spartan Blades in collaboration with legendary knife maker William "Bill" Harsey Jr.
The SHF 3.25 is the knife many of you have been waiting for! A reliable 6AL4V titanium frame-lock pocket knife with a handcrafted 3.25" damascus steel blade made by Chad Nichols. Easy to carry and comfortable in the hand, this is a truly exceptional knife. Constructed like its award-winning big brother the SHF 3.25 is made entirely of 6AL-4V titanium, except for the pivot, blade and arbor.
This medium-sized folding knife features a reversible pocket clip and two thumb studs that allow it to be carried in either the right or left hand. If you are looking for a high-quality, well-designed folding knife, this is one you should consider!
Intended Use: Collector/Sportsman
Type of manufacture: MidTech
Country of manufacture: USA
Blade: handcrafted stainless damascus steel, by Chad Nichols
Blade treatment: -
Handle: titanium 6AL4V
Blade length: 82.5mm.
Blade thickness: 3.2mm.
Length closed: 98.5mm.
Total length: 181mm.
Weight: 82g.
Closure: FrameLock
Clip: anodized titanium
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William HarseySF10DMBZ -
Spartan Blades - Harsey Difensa - Kydex, DLC Flat Black and Black Micarta - SB19BKBKKYBK - knife
In 1943 a battle was fought between the U.S. and Canadian First Special Service Force and German troops in Italy. Known as the Battle of Monte la Difensa, the courageous performance of the U.S. and Canadian forces on this occasion was essential to the final Allied victory in Italy.
When Canadian Special Forces commissioned Spartan Blades and master cutler William Harsey to produce a blade for them, we knew we wanted to create something special. Our goal was to create a knife that would serve the Special Forces for years to come, both in the northern woods of their homeland and in missions around the world. The result was the Spartan Harsey Difensa, named after the infamous and hard-fought victory achieved through cooperation between Canadian and U.S. forces.
The name refers to the excellent use of this custom tactical knife in the field and on the battlefield. The spearhead profile of this handcrafted knife is flat, with a tapered top edge that provides excellent tip strength, balanced penetration, and cutting power.
The full tang and handle of the Spartan Harsey Difensa allow for neutral balance in the user's hand. Combined with the ergonomic Micarta canvas handle, modified from our Model II, with no rear joints, this custom combat knife provides the griper with a comfortable and secure grip in both dry and wet conditions.
After more than 40 years of service in the U.S. Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had already been designing and drawing knives for his friends in the Special Forces for years, and Mark, who had always been involved in military and tactical equipment when he served in the "Green Berets," decide to combine their skills and passion with the goal of building innovative and functional knives using the highest quality materials and made entirely in the United States.
Intended Use: Tactical/Military
Production Type: Mid Tech
Country of Production: USA
Blade: stainless steel CPM-S45VN 59/61HRC
Blade Finish: PVD Tungsten DLC Flat Black
Handle: Canvas Micarta
Blade length: 159mm.
Blade thickness: 4.8mm.
Total length: 295mm.
Balance: on the guard branch
Weight: 325g.
Sheath: thermoformed Kydex.
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William HarseySB19BKBKKYBK -
Tops - Tom Brown Tracker knife - Desert Tan Micarta - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased - year of production 2015
* Conditions: Like new
* Commercially available Yes
* Sharpening: Original
* Marks on blade: NO
* Signs on handle: NO
* Packaging: NO
* Sheath: In kydex
* Manuals, Certificates and Guarantees: YES
* Checked and Certified by our internal laboratoryIntended Use: Tactical/Military/Survival
Country of production: USA
Type of production: semi-artisanal
Blade: 1095 58HRC carbon steel
Handle: Micarta
Blade length: 160mm.
Blade thickness: 6mm.
Closed length: - mm.
Total length: 302mm.
Balance: in coincidence with the lower guard branch
Weight: 585g.
Sheath: in kydex, tactical, with double multi-position clip
Notes: Design by Tom Brown, used in the film The Hunted with Benicio Del Toro, each knife has a serial number on the blade.CP-TPU734 -
Tops - Tom Brown - The Tracker - RMT Handles - TPTBT010RMT - knife
Intended Use: Tactical/Military/Survival
Type of production: Made in the USA, semi-crafted
Blade: 1095 58HRC carbon steel - Camo
Handle: Micarta RMT (Rocky Mountain Tread)
Blade length: 160mm.
Blade thickness: 6mm.
Total length: 302mm.
Balance: in coincidence with the lower guard branch.
Weight: 595g.
Sheath: made of kydex, with double metal multi-position clip
Notes: Design by Tom Brown; used in the 2003 film "The Hunted / The Prey" starring Benicio Del Toro and Tommy Lee JonesTPTBT010RMT -
TOPS Knives - M-PAT Tactical by Seth Brown - MPAT-01 - knife
The M-PAT was created by U.S. military service member Seth Brown and was designed specifically for fighter jet crews. Its slim profile and sturdy size are designed it specifically so that it can be carried on the safety vest or otherwise at the top of the torso in order to cause as little discomfort as possible while in the flight deck. It is ideal for vertical carrying and, thanks to the two retention modes of the sheath, it will not go anywhere until you need it. The M-PAT's applications extend outside the cockpit and it is perfectly suited to a belt or tactical vest. It is always handy when you need it and out of the way when you don't. When you only have room for one knife for self-defense and survival, there's the M-PAT.
Intended Use: Tactical/Military
Type of production: Semi-Industrial
Country of manufacture: USA
Blade: full tang in 1095 58/60HRC steel
Blade treatment: Coyote Tan Coating
Handle: Canvas Micarta
Blade Length: 124mm.
Blade thickness: 4.8mm.
Total Length: 248mm.
Balance: on the guard branch
Weight: 309g.
Sheath: kydex
Packaging: transparent plastic bag
Notes: Emergency whistle - Design by Seth BrownMPAT-01 -
Tops - Silent Hero 4 by Anton Du Plessis - knife
The original purpose of the Silent Hero knife was to provide a medium-sized tool for use by an interdiction unit specializing in fighting rhino poachers in Africa. It is an excellent design that has served many people on different continents. Over time, Anton (the designer) realized that he did not always need such a large knife strapped to his hip.
This is where the Silent Hero 4 was born. The handle and blade shape of the full-sized knife were perfect for a variety of tasks. By reducing them, you get a knife that is much easier to carry as an EDC, but still long enough to handle most cutting tasks. The appearance of this smaller version is basically the same, but there are some differences. The blade is a bit thinner, the finish is Sniper Gray Cerakote (instead of Black River Wash) and it comes with a Kydex sheath instead of leather. So if you are looking for a blade to match your Silent Hero or simply prefer a blade length of about 4" instead of 6", the new Silent Hero 4 will be an excellent addition to your collection!
Intended Use: UtilityType of production: Semi-Industrial
Country of manufacture: USA
Blade: full tang in 1095 58/60HRC steel
Blade treatment: Cerakote Sniper Gray
Handle: Canvas Micarta
Blade length: 108mm.
Blade thickness: 3.4mm.
Total length: 225mm.
Balance: on the guard branch
Weight: 170g.
Sheath: kydex
Packaging: transparent plastic bag
Notes: Emergency whistle - Design by Anton Du PlessisHERO4-01 -
Tops - Power Eagle 12 Machete & ALRT XL Tanto - Knife
The Power Eagle 12 is a true force multiplier
For hundreds of years, people have survived by using machetes as a source of income, food, shelter and self-defense tool. TOPS designer Leo Espinoza has taken this tool, combined with a kukuri and a bolo, and enhanced it with highly flexible, impact-resistant steel. The bushcrafter, explorer, or outdoor expert can use it for long periods of time without much effort or fatigue, thanks to the extremely ergonomic, comfortable, and indestructible handle.
Whether you use it to clear a trail, build a shelter, or for military or survival applications, this is definitely an important tool.
TOPS POWER EAGLE 12Intended use: machete / heavy utility
Type of manufacture: semi-industrial
Blade: full tang in 1095 carbon steel
Country of Production: USA
Handle: Micarta
Blade length: 300mm.
Blade thickness: 6.3mm.
Total length: 448mm.
Balance: advanced
Weight: 740g.
Sheath: made of Nylon, simultaneously holds the Power Eagle and ALRT XL Tanto
Notes: -
TOPS ALRT XL TANTOIntended use: light utility / neck knife
Type of production: semi-industrial
Blade: full tang in 1095 carbon steel
Country of Production: USA
Handle: 1095 carbon steel
Blade length: 35mm.
Blade thickness: 4mm.
Total length: 135mm.
Weight: 89g.
Sheath: thermoplastic, for neck
Notes: -TPPE12 -
Tops - Rocky Mountain Spike - Sandstorm Bronze - knife
The Rocky Mountain Spike is the result of several months of testing and fine-tuning in the field. The original design was to flank or add a large knife, such as a TOPS Machete or Power Eagle, to offer the user a variety of other applications on smaller projects. The size and steel mass of large knives certainly have their place. However, every once in a while a situation arises where one wishes to have a smaller knife, and particularly one with a narrow blade.
After using and abusing the prototypes in the field, those who have tested the small Rocky Mountain have seen a wide variety of cutting, scraping, splitting, EDC, and separating tasks for which this tool can be used effectively.
We now believe that the Rocky Mountain Spike is an excellent stand-alone toolfor hikers, bikers, campers, boaters, weekend outdoor enthusiasts, and long trips. It can be worn on your belt or kept in your backpack, boot or any other convenient place. Whether it is for general outdoor activities, at work or at home, this is the tool for you.
Intended Use: Utility
Type of production: Semi-Industrial
Country of manufacture: USA
Blade: full tang in 1095 58/60HRC steel
Blade treatment: Sandstorm Bronze
Handle: 1095 58/60HRC steel
Blade length: 8.9mm.
Blade thickness: 4.5mm.
Total length: 185mm.
Balance: on the guard branch
Weight: 70g.
Sheath: leather
Packaging: transparent plastic bag
Notes: emergency whistleTPRMS01 -
Tops - Baja 3.0 - Small Outdoor Knife - Green Canvas Micarta - Knife
The Baja 3.0 knife is a synthesis of simple design and excellent execution. The 3.0-inch blade can adequately handle a wide variety of tasks, such as building wooden tools, building a fire and shelter, or felling an animal. The 1/8-inch thick 1095 high-carbon steel provides excellent cutting, penetration and edge-holding qualities. The simple handle design, with its Micarta grooves, provides the user with excellent traction in most circumstances.
Intended Use: Utility
Production Type: Semi-Industrial
Country of Production: USA
Blade: full tang in 1095 58/60HRC steel
Blade Finish: Coyote Tan Coatung
Handle: Canvas Micarta
Blade Length: 76mm.
Blade thickness: 3.5mm.
Total length: 158mm.
Weight: 85g.
Sheath: leather, belt
Packaging: transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by certificate of guarantee and authenticityTPBAJA03 -
Tops - C.U.B. Compact Utility Blade - Tan Micarta - Knife
The C.U.B. (Compact Utility Blade) is designed to serve as a compact and lightweight sidekick to a machete/bolo/parang in a tropical environment or of a tomahawk/axe in a forest environment. It is capable of performing all the important utility functions for camp and food preparation, leaving the heavy lifting to the other cutting tools. With an emphasis on compactness, the C.U.B. was designed with two styles of knives in mind: the Finish Puukko (with scandi sharpening) and the Kephart. Put them in a blender and you get the C.U.B. TOPS: robust simplicity!
Intended Use: Utility
Type of Production: Semi-Industrial
Country of Production: USA
Blade: full tang in 1095 58/60HRC steel
Blade Finish: Stonewashed
Handle: Canvas Micarta
Blade Length: 95mm.
Blade thickness: 3.5mm.
Total length: 203mm.
Weight: 148g.
Scabbard: Nylon, belt-mounted, M.O.L.L.E. compatible.
Packaging: transparent plastic bag
Notes: Emergency whistle - Small Survival Kit with tinder box, compass, rubber bands etc. - Each piece is numbered and accompanied by certificate of guarantee and authenticityTPCUB01 -
Tops - Mission Team 21 Fixed Knife - 1095 - MT-21 - knife
The Mission Team 21 is a no-nonsense tactical knife that can also easily carry out many activities in the field. The handle has been designed to remain in the operator's hand even in difficult situations thanks to the finger grooves, finger guard and jimping. If necessary, the knife can also be used in survival situations.
Created with the guidance of Bill Hill (Command Master Chief-Seal Team 3 retired with over 30 years of real-time experience), this design has produced a great field tool for any theater. Very nice aesthetically, feels good in the hand and always performs at its best.
Intended use: Utility
Type of production: Semi-Industrial
Country of production: USA
Blade: full tang in 1095 steel 58 / 60HRC
Blade treatment: Black River Wash
Handle: G10 Black
Blade length: 150 mm.
Blade thickness: 6mm.
Total length: 300 mm.
Balancing: on the guard branch
Weight: 487g.
Sheath: in cordura
Packaging: Transparent plastic bag
Notes: Emergency whistleTOPS-MT-21 -
Tops - Anaconda Hunters Point knife - AN9-HP - 1095 - knife
Intended use: tactical / collection
Type of production: semi industrial
Blade: full tang in 1095 carbon steel
Production Lama: USA
Handle: Micarta
Blade length: 240mm.
Blade thickness: 6mm.
Closed Length: -
Total length: 375mm.
Balance: advanced - 2.5cm. from the guard branch
Weight: 630g.
Closure: -
Clip: -
Sheath: Cordura
Packaging: Transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by a certificate of guarantee and authenticityTOP-AN9-HP -
Tops - Mini Tom Brown Tracker knife # 4 - Camo 1095 - TBT-040-CAMO - knife
Intended use: Collection / Survival
Type of production: semi industrial
Production Lama: USA
Blade: 1095 58HRC carbon steel
Blade treatment: BTC - Camo Traction Coating
Handle: micarta with red spacers
Blade length: 85mm.
Blade thickness: 3.5mm.
Closed Length: -
Total length: 168mm.
Thick when closed: -
Balancing: on the guard branch
Weight: 92g.
Closure: -
Clip: -
Sheath: in kydex, tactical with multi-position clip
Packaging: -
Notes: Design by Tom Brown, extra small version of the knife used in the film The Hunted with Benicio Del Toro, each piece is numbered and accompanied by a certificate of guarantee and authenticity.TBT-040-CAMO -
Tops - Alaskan Harpoon Knife - AH906 - knife
Intended Use: Bushcraft / Utility
Production type: Semi-Industrial
Country of Production: USA
Blade: Full tang in 1095 58/60HRC steel
Blade Finish: Black Traction Coating
Handle: Micarta
Blade Length: 172mm.
Blade thickness: 6.3mm.
Total length: 305mm.
Weight: 430g.
Sheath: Nylon, for thighs, with frontal pocket.
Package: Transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by a certificate of guarantee and authenticity.TOPS-AH906 -
Tops - Outpost Command Survival Knife - OC01 - knife
Intended Use: Bushcraft / Utility
Production type: Semi-Industrial
Country of Production: USA
Blade: Full tang in 1095 58/60HRC steel
Blade Finish: Black Traction Coating
Handle: Micarta
Blade Length: 146mm.
Blade thickness: 6.3mm.
Total length: 286mm.
Weight: 510g.
Sheath: Nylon, thigh length, with frontal pocket.
Package: Transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by a certificate of guarantee and authenticity.TOPS-OC01 -
Tops - Fieldcraft - B.O.B. Brothers of Bushcraft knife - Hunter Tumble Finish - Gray micarta - knife
The Fieldcraft Knife was designed by The Brothers of Bushcraft, a group of nature activity enthusiasts. From tracking, to building shelters, the Brothers of Bushcraft are committed to training and educating people of all ages and genders to the passion of bushcraft.
The Fieldcraft Knife is the result of their knowledge and experience gained in the field; through experiences in the vast and humid rainforests, the arid and scorpion-strewn deserts and the freezing northern lands that span the Americas.
Intended use: Bushcraft / Utility
Type of production: Semi-Industrial
Production Lama: USA
Blade: full tang in 1095 steel 58 / 60HRC
Blade treatment: Ston wash and Satin
Handle: Micarta
Blade length: 120mm.
Blade thickness: 4.5mm.
Total length: 250mm.
Thick when closed: -
Weight: 274g.
Sheath: in Kydex with 360 ° rotatable metal belt clip and flintlock included
Packaging: Transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by a certificate of guarantee and authenticityTPBROSTBF02 -
Tops - 10/27 Karambit by Leo Espinoza - TPELPNX1 - knife
Intended Use: Tactical / Military
Production type: Semi-Industrial
Country of Production: USA
Blade: Full tang in 1095 58/60HRC steel
Blade Finish: Tactical Stone Coating
Handle: G-10
Blade Length: 89mm.
Blade thickness: 5mm.
Total length: 219mm.
Weight: 192g.
Sheath: Kydex sheath with metal belt clip rotatable 360° and tinder box included.
Package: Transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by a certificate of guarantee and authenticity.TPELPNX1 -
Tops - Fieldcraft - B.O.B. Brothers of Bushcraft knife - BRO8 - G10 Black - knife
The Fieldcraft Knife was designed by The Brothers of Bushcraft, a group of nature activity enthusiasts. From tracking, to building shelters, the Brothers of Bushcraft are committed to training and educating people of all ages and genders to the passion of bushcraft.
The Fieldcraft Knife is the result of their knowledge and experience gained in the field; through experiences in the vast and humid rainforests, the arid and scorpion-strewn deserts and the freezing northern lands that span the Americas.
Intended use: Bushcraft / Utility
Type of production: Semi-Industrial
Production Lama: USA
Blade: full tang in 1095 steel 58 / 60HRC
Blade treatment: Black Traction Coating
Handle: G10
Blade length: 120mm.
Blade thickness: 4.5mm.
Total length: 250mm.
Thick when closed: -
Weight: 278g.
Sheath: in Kydex with 360 ° rotatable metal belt clip and flintlock included
Packaging: Transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by a certificate of guarantee and authenticityTPBROSWB -
Tops - Skullcrushers Xtreme Blade knife SXB Camo - TPSXB10C - knife
Intended Use: Tactical/Military/Survival
Type of production: semi industrial
Blade: full tang in carbon steel 1095 58HRC
Blade finishing: Camouflage
Handle: Micarta
Blade length: 260mm.
Blade thickness: 6mm.
Total length: 425mm.
Balance: Advanced
Weight: 735g.
Sheath: Nylon
Notes: Design By Xtreme Survivalist & Adventurer EJ Snyder.TPSXB10C -
Tops - Overlander 2 survival knife - OV78 - knife
Intended use: Bushcraft / Utility
Type of production: Semi-Industrial
Production Lama: USA
Blade: full tang in 1095 steel 58 / 60HRC
Blade treatment: Black Traction Coating
Handle: Micarta
Blade length: 100mm.
Blade thickness: 4.5mm.
Total length: 210mm.
Thick when closed: -
Weight: 191g.
Sheath: in Kydex with 360 ° rotatable metal belt clip
Packaging: Transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by a certificate of guarantee and authenticityTOPS-OV78 -
Tops - Tom Brown - The Tracker Camo knife - TPTBT010C - knife
Tops - Tom Brown - The Tracker
Intended use: Tactical / Military / Survival
Type of production: semi industrial
Blade: 1095 58HRC carbon steel - Camo
Handle: Micarta
Blade length: 160mm.
Blade thickness: 6mm.
Closed length: - mm.
Total length: 302mm.
Balancing: coinciding with the lower guard branch
Weight: 595g.
Closure: -
Clip: -
Sheath: in kydex, tactical with double multi-position clip
Notes: Design by Tom Brown, used in the film The Hunted with Benicio Del Toro, entirely handmade in the USA, each knife is numbered and accompanied by a certificate of guarantee and authenticity.TPTBT010C -
Spartan Blades - Enyo Black AUS-8A - Field Grade - SBBL2BK - Knife
Intended Use: Neck / Tactical / Military
Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-8A 58/60HRC
Blade Finish: Black Powder Coating
Handle: Stainless steel AUS-8A 58/60HRC
Blade Length: 68mm.
Blade thickness: 4.8mm.
Total length: 159mm.
Weight: 80g.
Scabbard: Thermoplastic, multi-position, with push-button retention system.
Package: Cardboard box with Spartan Blades Field Grade logos.
Note: Design by Iovito/Carey - The Field Grade series with Bronze color box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (company formed by Spartan Blades and Ka-Bar). In this series you can find the most iconic Spartan Blades designs offered at very aggressive and competitive prices.SBBL2BK -
Tops - Tidal Force - Cleaver Karambit by Leo Espinoza - TFOR-01 - knife
Let's face it: cleavers are awesome and so are Karambits! Put them together the right way and you've got an interesting tool.
The Tidal Force is that tool. Use it for everyday tasks, hiking, food prep, whatever you decide to use it for you'll still make a great impression. It has the famous TOPS differentiated heat treatment on the proven 1095 carbon steel, fantastic jute micarta handles and a solid kydex sheath with a real leather dangler of the highest quality.
Intended use: Survival / Hiking / Cooking
Type of production: semi industrial
Blade: full tang in 1095 58HRC carbon steel
Blade finish: Tactical Gray
Handle: Brown Burlap Micarta
Blade Length: 123mm.
Blade thickness: 5mm.
Total length: 250mm.
Balance: on guard branch
Weight: 335g.
Scabbard: Kydex, Taco type, with leather dangler for belt loop.
Notes: Design By Leo EspinozaTFOR01 -
Tops - US Combat Tactical Knife - US-01 - knife
Intended use: Tactical / Military / Survival
Type of production: semi industrial
Blade: full tang in 1095 58HRC carbon steel
Blade finish: Black Traction Coating
Handle: Micarta
Blade length: 200mm.
Blade thickness: 6mm.
Total length: 345mm.
Balancing: advanced
Weight: 449g.
Sheath: Nylon
Notes: design by Laci SzaboTPUS01 -
Tops - SXB Skullcrushers Xtreme Blade - TPSXB10 - knife
Intended use: Tactical / Survival / Heavy Utility
Type of production: semi-industrial
Blade: full tang, 1095 58HRC carbon steel
Blade finish: Black Traction Coating
Handle: Micarta
Blade length: 260mm.
Blade thickness: 6mm.
Total length: 425mm.
Balancing: advanced
Weight: 735g.
Sheath: Nylon
Notes: Design By Xtreme Survivalist & Adventurer EJ SnyderTPSXB10 -
Tops - Operator 7 - Blackout Edition - OP7-02 - Knife
Intended use: Tactical / Utility
Type of production: Semi-Industrial
Country of production: USA
Blade: full tang in 1075 - 56 / 58HRC carbon steel
Blade treatment: Black Traction Coating
Handle: G10 Black
Blade length: 184mm.
Blade thickness: 7.8mm.
Total length: 318mm.
Balancing: on the guard branch
Weight: 695g.
Sheath: in kydex
Packaging: Transparent plastic bag
Notes: Design by Leo EspinozaOP702 -
Spartan Blades - Formido EDC Knife - Black - SB39BKKYBK - Knife
After more than 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.
Curtis, who for years had been designing and designing knives for friends in the special forces and Mark, who had always been involved in military equipment and tactics when he worked in the "Green Berets", decided to combine their skills and their passion with the goal to build innovative and functional knives using materials of the highest quality and made entirely in the United States.
Type of production: Mid Tech
Country of production: USA
Blade: CPM-S35VN 59 / 60HRC stainless steel
Blade finish: PVD Tungsten DLC Flat Black
Handle: -
Blade length: 95mm.
Blade thickness: 4.8mm.
Total length: 220mm.
Balancing: on the guard branch
Weight: 132g.
Sheath: in kydex
Packaging: Cardboard box with Spartan Blades logos
Notes: Designed by IovitoSB39BKKYBK -
Spartan Blades - Formido EDC Knife - Tan - SB39BKKYTN - Knife
After more than 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.
Curtis, who for years had been designing and designing knives for friends in the special forces and Mark, who had always been involved in military equipment and tactics when he worked in the "Green Berets", decided to combine their skills and their passion with the goal to build innovative and functional knives using materials of the highest quality and made entirely in the United States.
Intended use: Tactical / Military
Type of production: Mid Tech
Country of production: U.S.A.
Blade: CPM-S35VN 59 / 60HRC stainless steel
Blade finish: PVD Tungsten DLC Flat Tan
Handle: -
Blade length: 95mm.
Blade thickness: 4.8mm.
Total length: 220mm.
Balancing: on the guard branch
Weight: 132g.
Sheath: in kydex
Packaging: Cardboard box with Spartan Blades logos
Notes: Designed by IovitoSB39BKKYTN -
Spartan Blades - Ronin Shinto Knife - Flat Black - Knife
After more than 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.
Curtis, who for years had been designing and designing knives for friends in the special forces and Mark, who had always been involved in military equipment and tactics when he worked in the "Green Berets", decided to combine their skills and their passion with the goal to build innovative and functional knives using materials of the highest quality and made entirely in the United States.
Intended use: Tactical / Military
Type of production: Mid Tech
Country of production: USA
Blade: CPM-S35VN 59 / 60HRC stainless steel
Blade finish: PVD Tnugsten DLC Flat Black
Handle: G10
Blade length: 148mm.
Blade thickness: 4.8mm.
Total length: 270mm.
Balancing: on the guard branch
Weight: 255g.
Sheath: in Nylon, with MOLLE attachments
Packaging: Cardboard box with Spartan Blades logos
Notes: Tu Lam and Curtis IovitoSB47BKBKNLBK -
Spartan Blades - Ronin Shinto Knife - Flat Dark Earth - Knife
After more than 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.
Curtis, who for years had been designing and designing knives for friends in the special forces and Mark, who had always been involved in military equipment and tactics when he worked in the "Green Berets", decided to combine their skills and their passion with the goal to build innovative and functional knives using materials of the highest quality and made entirely in the United States.
Intended use: Tactical / Military
Type of production: Mid Tech
Country of production: USA
Blade: CPM-S35VN 59 / 60HRC stainless steel
Blade finish: ZrN Flat Dark Earth
Handle: G10
Blade length: 148mm.
Blade thickness: 4.8mm.
Total length: 270mm.
Balancing: on the guard branch
Weight: 255g.
Sheath: in Nylon, with MOLLE attachments
Packaging: Cardboard box with Spartan Blades logos
Notes: Tu Lam and Curtis IovitoSB47DEBKNLTN -
Spartan Blades - Oculus knife - Harsey Folder 2019 Special Edition - knife
Model winner of the 2016 Blade Show as "American Made Knife of the Year"
The model photographed is the Limited Edition 2019
After more than 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.
Curtis, who for years had been designing and designing knives for friends in the special forces and Mark, who had always been involved in military equipment and tactics when he worked in the "Green Berets", decided to combine their skills and their passion with the goal to build innovative and functional knives using materials of the highest quality and made entirely in the United States.
Intended use: Collection / Sports
Type of production: Semi-Industrial
Country of production: USA
Blade: CPM-S35VN stainless steel
Blade treatment: Stone Washed
Handle: titanium 6AL-4V
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: 125mm
Total length: 225mm.
Weight: 168g.
Closure: FrameLock
Clip: in anodized titanium
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William Harsey - 2019 limited edition anodized with engravingsSF5OCULUS -
Tops - Operator 7 knife OP701 - knife
Intended use: Utility
Type of production: Semi-Industrial
Country of production: USA
Blade: full tang in steel 1095 58 / 60HRC
Blade treatment: Black River Wash
Handle: G10 Black
Blade length: 184 mm.
Blade thickness: 7.8mm.
Total length: 318 mm.
Balancing: on the guard branch
Weight: 695g.
Sheath: in kydex
Packaging: Transparent plastic bag
Notes: Emergency whistle - Design by Leo EspinozaThe Operator 7 is huge! TOPS Knives went well with heavy steel and handles to make a hefty, well-balanced knife. It also has those classic American fighting knife aesthetics that make it look as good as it will perform.
Made out of 5/16 "thick 1075, the differentially heat-treated blade with a very strong thorn. The entire handle is also over 1 "thick once assembled to fill out the user's hand much like an ax or hatchet handle would.
Because it is a tool, it's got to be comfortable. It's made for the men that do not back down. This knife will find its place with door kickers, survivalists, and weekend warriors alike. The rounded handles and hand guards make it a joy to use and the finger choil allows the user great precision for finer cuts. The 6.5 "of cutting edge will help you get the work done." The included Kydex sheath with dangler attachment makes it easy to carry into whatever territory you find yourself.
OP701 -
Tops - Tom Brown Tracker #3 - Tumble CPM-154CM - TBT031 - knife
Intended use: Hard Utility / Survival
Type of production: industrial seeds
Country of production: USA
Blade: CPM-154CM stainless steel 58 / 60HRC with cryogenic treatment
Blade finish: tumbled
Handle: micarta
Blade length: 147mm.
Blade thickness: 5mm.
Total length: 273mm.
Balancing: coinciding with the lower guard branch
Weight: 931g.
Sheath: in thermoformed kydex with 360 ° rotating steel clips
Notes: Design by Tom Brown - used in the film The Hunted with Benicio Del ToroTBT031 -
Tops - Tom Brown Tracker - 20th Anniversary Limited Edition - TBT032 - knife
Intended use: hard utility / survival
Type of production: industrial seeds
Country of production: USA
Blade: CPM-S35VN stainless steel
Blade finish: stone washed
Handle: micarta
Blade length: 147mm.
Blade thickness: 5mm.
Total length: 273mm.
Balancing: coinciding with the lower guard branch
Weight: 408g.
Sheath: in leather
Notes: Design by Tom Brown - used in the film The Hunted with Benicio Del Toro - Limited edition edition to celebrate the 20 years of production of the model - Each knife is numbered and accompanied by a certificate of guarantee and authenticityTBT032 -
Tops - El Chete Machete by Leo Espinoza - ELCH - knife
Intended use: Heavy Utility
Type of production: Semi-Industrial
Country of production: USA
Blade: full tang in steel 1095 56 / 58HRC
Blade treatment: Acid Rain
Handle: Green and Black Canvas Micarta
Blade length: 305mm.
Blade thickness: 6.4mm.
Total length: 445mm.
Balancing: Advanced
Weight: 835g.
Sheath: Kydex, with leather belt loop
Packaging: Transparent plastic bag
Notes: Emergency whistle - Design by Leo EspinozaTO-ELCH02 -
Tops - Silent Hero by Anton Du Plessis - knife
Intended use: Utility
Type of production: Semi-Industrial
Country of production: USA
Blade: full tang in steel 1095 58 / 60HRC
Blade treatment: Black River Wash
Handle: Tan Canvas Micarta
Blade length: 240mm.
Blade thickness: 5mm.
Total length: 295mm.
Balancing: on the guard branch
Weight: 315g.
Sheath: in black leather
Packaging: Transparent plastic bag
Notes: Emergency whistle - Design by Anton Du PlessisThe Silent Hero was designed by Anton Du Plessis, who is the Chief of Operations for the Specialized Interdiction Unit of the Silent Heroes Foundation. His task is to combat the poaching crisis in South Africa. This knife has to be durable, versatile, and able to fill Anton's needs in the field, which affected the design of the blade and the handle. It will definitely hold up to hard use. And with a weight of only 12 oz, you'll be able to use the knife without getting fatigued too quickly.
There is a lanyard hole in the handle along with another in the finger guard. This is meant to allow the user to add a safety cord in order to improve the grip on the handle, which already allows for a solid grip. The finger-guard hole can also be used to assist in lashing to a spear when the situation warrants it.
There is a finger choil up into the blade to give you the ability to choke up and execute precise, fine cuts. The drop point design makes this knife great for slicing and gives the tip extra strength. So this knife will be a great knife for bushcraft, survival, and tactical purposes.
The black leather sheath is durable and looks great paired with this knife. The Silent Hero is held in place with a single snap loop that curls around the finger guard.
The Silent Hero is a great design and a very versatile blade. It is large enough that it can be used to chop, but is also still small enough to complete most of the tasks you can do or want to do with a smaller knife.
TOPS Knives is a proud supporter and Corporate Sponsor of the Silent Heroes Foundation.
HERO-02 -
Tops - Wind Runner XL SRE - Snake River Edition - WDR-XL - knife
Intended use: Utility
Type of production: Semi-Industrial
Country of production: USA
Blade: full tang in steel 1095 58 / 60HRC
Blade treatment: Black River Wash
Handle: Tan Canvas Micarta
Blade length: 120mm.
Blade thickness: 4.5mm.
Total length: 248mm.
Balancing: Set back
Weight: 270g.
Sheath: kydex, with vertical belt attachment
Packaging: Transparent plastic bag
Notes: Emergency whistle - Design by Leo EspinozaT-WDR-XL -
Spartan Blades - Spartan Harsey Folder - Black Logo Limited Edition - SF5S - Knife
Winner of the Blade Show 2016 as "American Made Knife of the Year"
After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.
Curtis, who for years has designed and designed knives for friends in special forces, and Mark, who has always been engaged in military and tactical equipment when working in the "Green Berets", decides to combine their skills and passion with the " The goal of building innovative and functional knives using high quality materials and entirely made in the United States.
Purpose: Collection / Sportsman
Type of production: Semi-Industrial
Country of Origin: USA
Blade: Stainless steel CPM-S35VN
Blade Treatment: Black PVD
Manicure: Black PVD 6AL-4V titanium
Blade Length: 100mm.
Blade thickness: 4mm.
Closed length: 125mm
Total length: 225mm.
Weight: 166g.
Closure: FrameLock
Clip: anodized titanium
Packing: Cardboard box with Spartan Blades logos
Notes: Design by William Harsey - Limited edition anodized with engravings
Google Traduttore per il Business:Translator ToolkitTraduttore di siti webStrumento a supporto dell'export
Informazioni su Google TraduttoreCommunityPer cellulariTutto su GooglePrivacy e TerminiGuidaSF5SPARTAN -
Spartan Blades - Spartan Harsey Folder - Bronze Helmet Limited Edition - SF5H - Knife
Winner of the Blade Show 2016 as "American Made Knife of the Year"
After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.
Curtis, who for years has designed and designed knives for friends in special forces, and Mark, who has always been engaged in military and tactical equipment when working in the "Green Berets", decides to combine their skills and passion with the " The goal of building innovative and functional knives using high quality materials and entirely made in the United States.
Purpose: Collection / Sportsman
Type of production: Semi-Industrial
Country of Origin: USA
Blade: Stainless steel CPM-S35VN
Blade Treatment: Black PVD
Manicure: Anodized 6AL-4V titanium
Blade Length: 100mm.
Blade thickness: 4mm.
Closed length: 125mm
Total length: 225mm.
Weight: 166g.
Closure: FrameLock
Clip: stainless steel
Packing: Cardboard box with Spartan Blades logos
Notes: Design by William Harsey - Limited edition anodized with engravings
Google Traduttore per il Business:Translator ToolkitTraduttore di siti webStrumento a supporto dell'export
Informazioni su Google TraduttoreCommunityPer cellulariTutto su GooglePrivacy e TerminiGuidaSF5HELMET -
Spartan Blades - Metis Flipper - SF4SWSW - Knife
After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.
Curtis, who for years has designed and designed knives for friends in special forces, and Mark, who has always been engaged in military and tactical equipment when working in the "Green Berets", decides to combine their skills and passion with the " The goal of building innovative and functional knives using high quality materials and entirely made in the United States.
Purpose of use: Sportsman
Type of production: Semi-Industrial
Country of Origin: USA
Blade: Stainless steel CPM-S35VN
Blade treatment: stonewash
Manicure: Titanium 6AL-4V
Blade Length: 70mm.
Blade thickness: 3.5mm.
Closed length: 100mm
Total Length: 170mm.
Weight: 81g.
Closure: FrameLock
Clip: Titanium 6AL-4V
Packing: Cardboard box with Spartan Blades logos
Notes: GTC Alpha Ball Bearing Opening - Carson Flipper System Opening - Design by Keith Edick and Curtis IovitoSF4SWSW -
Spartan Blades - Pallas - Tanto Black PVD - SF3BKT - Knife
After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.
Curtis, who for years has designed and designed knives for friends in special forces, and Mark, who has always been engaged in military and tactical equipment when working in the "Green Berets", decides to combine their skills and passion with the " The goal of building innovative and functional knives using high quality materials and entirely made in the United States.
Target: Tactical / Sportsman
Type of production: industrial seeds
Country of Origin: USA
Blade: Stainless steel CPM-S35VN
Blade treatment: PVD
Handle: aluminum
Blade Length: 96mm.
Blade thickness: 4 mm.
Closed length: 130mm
Overall length: 222mm.
Closed thickness: 18mm
Weight: 149g.
Closure: ButtonLock
Clip: stainless steel
Packing: Cardboard box with Spartan Blades logos
Notes: Opening movement with Carson Flipper systemSF3BKT -
Spartan Blades - Pallas - Drop Black PVD - SF3BK - Knife
After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.
Curtis, who for years has designed and designed knives for friends in special forces, and Mark, who has always been engaged in military and tactical equipment when working in the "Green Berets", decides to combine their skills and passion with the " The goal of building innovative and functional knives using high quality materials and entirely made in the United States.
Target: Tactical / Sportsman
Type of production: industrial seeds
Country of Origin: USA
Blade: Stainless steel CPM-S35VN
Blade treatment: PVD
Handle: aluminum
Blade Length: 96mm.
Blade thickness: 4 mm.
Closed length: 130mm
Overall length: 222mm.
Closed thickness: 18mm
Weight: 149g.
Closure: ButtonLock
Clip: stainless steel
Packing: Cardboard box with Spartan Blades logos
Notes: Opening movement with Carson Flipper systemSF3BK