Sport, Military and Collectible Knives | Coltelleria Collini

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available: No
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratory

Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: stainless steel RWL34 hardened to 59/60 HRC
Blade finish: satin finish
Handle: amber Sambar stag with 416 stainless steel guard and pommel
Blade length: 107mm.
Blade thickness: 3.5mm.
Total length: 220mm.
Weight: 181g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.

KNIFE ACQUIRED FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Excellent overall condition, with minor storage and handling marks consistent with its age
* Commercial availability: Discontinued - rare collector's model
* Sharpening: Apparently original factory edge
* Marks on blade: Minimal surface marks consistent with age; blade in excellent overall condition
* Marks on handle: Minimal surface marks consistent with age and storage
* Box: Present, original period box, with stains, yellowing and normal signs of age
* Sheath: Present, original Buck Nemo synthetic diving sheath, complete with retaining straps
* Manuals, Certificates and Warranties: Original BUCK NEMO documentation with use and maintenance instructions included
* Inspected and Certified by our in-house laboratory

The Buck 122 Nemo is one of the most fascinating and collectible knives from Buck's early production history and represents an important chapter in the development of the American brand. Introduced in 1967, the Nemo was specifically designed as a professional diving knife for divers requiring a strong, powerful and dependable tool for use in marine environments.

The Nemo design would subsequently give rise to the celebrated Buck 124 Frontiersman. During the earliest stages of production, the two models were essentially identical in terms of knife construction and were distinguished primarily by their equipment: the 122 Nemo was supplied with a dedicated synthetic diving sheath designed to be strapped to the leg, whereas the Frontiersman was marketed with a traditional leather sheath for outdoor use.

The example offered here belongs to one of the rarest and most desirable configurations within the Nemo/Frontiersman family: the early 1967 commercial production with white Teflon spacers. According to historical documentation from the Buck Collectors Club, the estimated production for this configuration was only 300-500 examples.

Its construction details are highly distinctive: a black phenolic handle, thin white Teflon spacers, a robust stainless-steel guard and the characteristic one-piece stainless-steel bird's-beak pommel, complete with a lanyard hole at the end.

The blade marking is also significant for dating the knife. The ricasso bears the simple two-line “BUCK / U.S.A.” stamp, without the 122 model number. Buck introduced systematic model-number markings only in later years, making this early configuration immediately recognizable to knowledgeable collectors.

The large plain-edge blade is made from 440C stainless steel, one of the reference steels used by Buck during this period and selected for its strong cutting performance, toughness and good corrosion resistance. Nevertheless, the Nemo's intended underwater use required particularly careful maintenance after exposure to salt water, something Buck specifically emphasized in the documentation originally supplied with the knife.

This example retains its rare original Buck Nemo diving sheath, made from rigid synthetic material and complete with adjustable straps for attachment to the diver's leg. The presence of the Nemo-specific sheath is particularly important, as it distinguishes this configuration from the contemporary Buck 124 Frontiersman.

The set also retains the original large two-piece ivory-colored Buck Knife box, typical of the earliest production period, and most importantly the rare original “BUCK NEMO” instruction sheet, in which Buck explained the characteristics of the steel and provided specific instructions for proper blade maintenance following use in water.

The knife is in excellent condition considering its age. The blade retains a very uniform satin finish and shows no evident corrosion; the handle, guard and pommel are likewise very well preserved. Only minor surface marks consistent with almost sixty years of storage and handling are visible.

The original sheath is complete and in excellent overall condition, with normal superficial signs of age. The box shows more evident staining, yellowing and storage marks, entirely consistent with its age. The original documentation is present and further enhances the historical importance and completeness of this set.

A 1967 Buck 122 Nemo with white Teflon spacers is already a highly significant piece in Buck history; finding one still accompanied by its original diving sheath, box and BUCK NEMO documentation makes this example particularly desirable for a collection dedicated to early Buck knives, American military and professional knives, or the history of diving knives.

Intended use: Professional diving / Collection
Production type: Industrial
Brand: Buck Knives
Model: 122 Nemo
Year / Variant: 1967 - White Teflon Spacers
Country of manufacture: USA
Blade: 440C stainless steel
Blade profile: Clip Point / Bowie
Edge: Plain
Blade finish: Satin
Marking: Two-line BUCK / U.S.A., without model number
Handle: Black phenolic material
Spacers: White Teflon
Guard: Stainless steel
Pommel: One-piece stainless steel, bird's-beak profile with lanyard hole
Blade length: Approx. 159mm / 6.25"
Overall length: Approx. 298mm / 11.75"
Sheath: Original Buck Nemo synthetic diving sheath with adjustable leg straps
Box: Original two-piece ivory-colored Buck Knife box
Documentation: Original BUCK NEMO instruction and maintenance sheet
Estimated production of this variant: 300-500 examples according to historical Buck Collectors Club documentation
Notes: Rare 1967 example with white Teflon spacers, previously purchased and acquired from a private collection

Sturdy, minimalist, and designed to deliver high performance in the field. The new Viper GMR fixed-blade knife, designed by Fabrizio Silvestrelli, takes its name from the initials of the founders of Tecnocut-Viper, paying homage to the brand’s artisanal origins and the Italian tradition of crafting high-quality knives.

Designed to ensure reliability, durability, and maximum functionality, the GMR stands out for its unique one-piece handle with an exposed tang—a solid and functional design that ensures a secure grip, excellent control during use, and easy cleaning even under the most demanding conditions.

The Hybrid Cryo steel blade, developed by Midgard Messer with support from the Austrian manufacturer Böhler, strikes a perfect balance between performance and practicality. Thanks to the cryogenic treatment and optimized hardness of 59–61 HRC, this steel offers an excellent combination of toughness, corrosion resistance, edge retention, and ease of resharpening, making it well-suited to the specific needs of a knife intended for daily use and outdoor activities.

The Drop Point profile with a Flat Grind edge ensures great versatility in cutting tasks, while the stonewashed finish helps protect the blade’s surface from signs of wear, giving it a distinctive, technical look.

The natural jute micarta handle completes a design engineered for lightness, strength, and ergonomics, while the leather sheath ensures safe and stylish carry. A knife entirely Made in Italy, combining contemporary design, innovative materials, and traditional craftsmanship.

Intended Use: Outdoor / Hunting / All-Round Utility

Production Type: Industrial
Country of Manufacture: Italy
Blade: Full tang in Hybrid Cryo steel
Blade Finish: Satin
Handle: Monoblock, with exposed tang, in natural jute micarta
Blade Length: 100 mm.
Blade thickness: 4 mm.
Overall length: 200 mm.
Weight: 160 g.
Sheath: Leather, for vertical carry on a belt
Packaging: Cardboard box with Viper logos
Notes: Designed by Fabrizio Silvestrelli

Sturdy, minimalist, and designed to deliver high performance in the field. The new Viper GMR fixed-blade knife, designed by Fabrizio Silvestrelli, takes its name from the initials of the founders of Tecnocut-Viper, paying homage to the brand’s artisanal origins and the Italian tradition of crafting high-quality knives.

Designed to ensure reliability, durability, and maximum functionality, the GMR stands out for its unique one-piece handle with an exposed tang—a solid and functional design that ensures a secure grip, excellent control during use, and easy cleaning even under the most demanding conditions.

The Hybrid Cryo steel blade, developed by Midgard Messer with support from the Austrian manufacturer Böhler, strikes a perfect balance between performance and practicality. Thanks to the cryogenic treatment and optimized hardness of 59–61 HRC, this steel offers an excellent combination of toughness, corrosion resistance, edge retention, and ease of resharpening, making it well-suited to the specific needs of a knife intended for daily use and outdoor activities.

The Drop Point profile with a Flat Grind edge ensures great versatility in cutting tasks, while the stonewashed finish helps protect the blade’s surface from signs of wear, giving it a distinctive, technical look.

The carbon fiber handle completes a design engineered for lightness, strength, and ergonomics, while the leather sheath allows for safe and elegant carrying. A knife entirely Made in Italy, combining contemporary design, innovative materials, and traditional craftsmanship.

Intended Use: Outdoor / Hunting / All-Round Utility

Production Type: Industrial
Country of Manufacture: Italy
Blade: Full Tang in Hybrid Cryo steel
Blade Finish: Stonewashed
Handle: Monoblock, with exposed tang, made of carbon fiber
Blade length: 100 mm.
Blade thickness: 4 mm.
Overall length: 200 mm.
Weight: 160 g.
Sheath: Leather, for vertical carry on a belt
Packaging: Cardboard box with Viper logos
Notes: Designed by Fabrizio Silvestrelli

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Never used, never removed from its sheath, never displayed; as it is a carbon blade and has remained in its sheath for a long time, it has unfortunately developed small spots of oxidation on the blade, which can be easily removed with a potential re-sharpening. However, it is not possible to remove the oxidation present on the passivating oxidation of the hamon. The price at which it is offered takes into account these aesthetic details, which in no way compromise its potential practical use.
* Available on the market: unique piece, entirely handmade
* Sharpening: Factory
* Marks on blade: small spots of oxidation, some potentially removable (those on the edge and tip of the blade)
* Marks on handle: None
* Box: Sold with burgundy velvet case
* Sheath: Like new, never used and never worn
* Manuals, Certificates, and Warranties: -
* Checked and Certified by our in-house laboratory

CAS Knives is the brand of Argentine brothers Claudio, Ariel, and Marcelo Sobral, artisans specializing in custom knives.

Claudio, who has been passionate about weapons since he was young, started working in a weapons factory at the age of 16, acquiring skills in forging and metalworking. In 2005, together with Ariel, he turned his passion for knives into a full-time business, which Marcelo joined in 2013, dedicating himself to the creation of sheaths. 

Renowned for their use of the San Mai technique, which combines aesthetics and functionality, the Sobrals combine creativity, craftsmanship, and dedication, working from their workshop in José León Suárez, near Buenos Aires.

Intended use: Collection

Type of production: handcrafted, entirely handmade
Blade: hand-forged San-Mai laminated steel (1095 core and 420 cheeks), with visible “hamon” — a contrasting effect created during the tempering process, which highlights the boundary of the tempered area where the cutting edge is located.
Blade finish: passivating oxidation
Country of manufacture: Argentina
Handle: Micarta with 420 stainless steel guard
Blade length: 212mm.
Blade thickness: 7 mm.
Total length: 354 mm.
Balance: advanced
Weight: 440 g.
Sheath: leather, entirely hand-stitched and engraved
Notes: knife withdrawn from private collection, previously purchased - unique piece, entirely handmade

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Like new, never removed from its original packaging
* Available on the market: Difficult to find - Limited edition of only 250 pieces
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: Present
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our in-house laboratory

The Spearpoint Vega combines precision engineering and premium materials in a superior folding knife. The lightweight and durable frame is made of finely sandblasted and polished aerospace titanium, embellished with carbon fiber inserts. The blade, made of “Wave” Damascus steel with a high-strength VG-10 cutting edge, offers versatile cutting.

The push-button locking system and stainless steel thumb stud allow for smooth one-handed opening. Every detail expresses William Henry's philosophy: combining superlative function and refined artistry. The Vega model uses hand-forged metals and exotic materials, symbolic of the William Henry collection, for an object that becomes a statement of style, designed to accompany you throughout your life.

Intended use: Collection

Type of production: MidTech
Country of production: USA
Blade: 45-layer laminated stainless steel Damascus with wave pattern and VG-10 cutting edge
Handle: Titanium with carbon fiber inserts
Blade length: 77.8mm.
Blade thickness: 2.3 mm.
Closed length: 104 mm.
Total length: 182 mm.
Weight: 59 g.
Closure: Button lock
Clip: Titanium, removable and reversible
Packaging: Wooden box with William Henry logos, cardboard outer box, certificate of authenticity
Notes: Limited edition of only 250 pieces - knife previously purchased from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private individual, previously purchased.
* Condition: Like new
* Commercially available: Commercially available.
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: -
* Scabbard: Present
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory.

The Le Thiers Artisanal Bouleau knife is a perfect blend of modern technology and traditional French craftsmanship. Designed to be ultra-light, it offers easy one-handed opening and closing. Its handcrafted production in Thiers is guaranteed by the Jurande, a corporation that guarantees respect for traditions and quality in handcrafted production, ensuring authenticity and quality.

Intended Use: Collection/Sportsman

Type of production: Handcrafted
Country of production: Laguiole, France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Satin
Handle: Olive wood
Blade length: 85mm.
Blade thickness: 2.5mm.
Length closed: 105mm.
Total length: 175mm.
Weight: 70g.
Closure: liner lock
Sheath: leather, pocket
Notes: previously purchased knife, from private collection

The Viper Alfa GB3D, designed by renowned designer Simone Tonolli, represents excellence in the field of folding knives for outdoor and hunting use. This knife combines a modern design with high-quality materials, delivering exceptional performance in any situation.

The CPM MagnaCut steel blade ensures superior wear and corrosion resistance, while the textured black G10 handle provides a firm and comfortable grip. The advanced back-lock mechanism offers security and reliability during use, making the Alfa GB3D an ideal choice for enthusiasts and professionals alike.

Intended use: Outdoor & Hunting
Production type: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut steel, hardness 60-62 HRC
Blade finish: Satin
Handle: Textured black G10
Blade length: 70 mm
Blade thickness: 3 mm
Closed length: 107 mm
Total length: 170 mm
Weight: 100 g
Locking mechanism: Advanced back-lock mechanism
Clip: Stainless steel wire clip
Packaging: Cardboard box with Viper logo
Notes: Designed by Simone Tonolli; equipped with bronze washers for smooth opening; frame with hardened steel liner

The new SAFE knife combines refined design and advanced functionality. Made with a blade of Bohler M390 steel, known for its exceptional edge retention and corrosion resistance, it offers versatility for both precision cuts and more intense work.

The ergonomic handle provides a secure and comfortable grip, with a texture that enhances its sleek aesthetic. The titanium clip allows discreet and secure carrying, ideal for everyday use. With clean lines and a meticulous finish, the knife reflects Viper's quality craftsmanship.

Designed by Fabrizio Silvestrelli, SAFE is a folding knife with a “tanto” blade that adopts the patented A.S.L.S. (Automatic Safe Lock System) that offers automatic safety when opening, while the ball-bearing flipper allows for convenient and quick one-handed opening.

Intended Use: Sports

Production type: Industrial
Country of manufacture: Italy
Blade: M390 stainless steel
Blade finish: Satin finish
Handle: carbon fiber handle, liners and spacer in 1.4116 stainless steel
Blade length: 102mm.
Blade thickness: 4mm.
Length closed: 128mm.
Total length: 221mm.
Weight: 155g.
Closure: liner lock with integrated Smart Automatic Safe Lock System
Clip: titanium, removable
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio “Silvester” Silvestrelli

The RANGER model is an ideal fixed knife for the camping kitchen thanks to its high blade; lightweight and easy to handle, it features a slim, ergonomic handle enhanced by a surface texture that ensures a secure grip in any situation.

Intended Use: Outdoor / Camp Kitchen

Type of production: Industrial
Country of Production: Italy
Blade: Full Tang in N690Co stainless steel
Blade finish: Stonewashed
Handle: Micarta
Blade Length: 117mm.
Blade thickness: 4mm.
Total length: 226mm.
Weight: 150g.
Sheath: leather
Packaging: cardboard box with Viper logos
Notes: Design by Jens Anso

The RANGER model is a fixed knife ideal for the camping kitchen thanks to its high blade; lightweight and easy to handle, it features a slim, ergonomic handle enhanced by a surface texture that ensures a secure grip in any situation.

The handle uses the brand new UltreX composite, a perfect material for modified G-10 handles. SureTouch is a revolutionary new patent-pending process that combines layers of G-10 with rubber. Now you can have the strength and durability of G-10 with the grip and non-slip properties of rubber, all in one material. 

The combination of G-10 and rubber offers one of the most revolutionary advantages on the market. Because G10 is commonly processed for the knife and gun industry, this new material allows for greater ease of use. SureTouch allows for improved grip and comfort.

Intended Use: Outdoor / Field Kitchen

Type of production: Industrial
Country of Production: Italy
Blade: Full Tang in N690Co stainless steel
Blade Finish: Stonewashed
Handle: UltreX SureTouch
Blade length: 117mm.
Blade thickness: 4mm.
Total length: 226mm.
Weight: 150g.
Sheath: leather
Packaging: cardboard box with Viper logos
Notes: Design by Jens Anso

Oniro is a knife that was born out of Viper's first collaboration with Denis Simonutti, as well as the first Viper folding knife to employ the crossbar lock, a safe and practical locking system to use.

With compact dimensions and an ergonomic design, this knife stands out for its adaptability and reliability. Ribs on the handle provide a firm and comfortable grip, allowing precise control in any situation. The Magnacut steel drop blade of this knife offers impeccable cutting precision, making it an indispensable tool for any task.

Innovative, durable and ready to overcome any challenge, our new Oniro knife is the ideal choice for those seeking maximum functionality without compromising on quality.

Intended Use: EDC / Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: CPM-Magnacut steel
Blade Finish: Satin finish
Handle: Fat Carbon fiber Dark Matter Gold color with internal stainless steel folders and steel spacers
Blade Length: 85mm.
Blade thickness: 3.5mm.
Length when closed: 106mm.
Total length: 188mm.
Handle thickness: 14mm.
Weight: 103g.
Locking system: Crossbar Lock
Clip: Removable, contoured titanium
Packaging: Cardboard box with Viper logos
Notes: Design by Denis Simonutti

Oniro is a knife that was born out of Viper's first collaboration with Denis Simonutti, as well as the first Viper lockable to employ the crossbar lock, a safe and practical locking system to use.

With compact dimensions and an ergonomic design, this knife stands out for its adaptability and reliability. Ribs on the handle provide a firm and comfortable grip, allowing precise control in any situation. The Magnacut steel drop blade of this knife offers impeccable cutting precision, making it an indispensable tool for any task.

Innovative, durable and ready to overcome any challenge, our new Oniro knife is the ideal choice for those seeking maximum functionality without compromising on quality.

Intended Use: EDC / Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: CPM-Magnacut steel
Blade Finish: Stonewashed
Handle: transparent amber-colored Ultem with internal stainless steel folders and steel spacers
Blade Length: 85mm.
Blade thickness: 3.5mm.
Length when closed: 106mm.
Total length: 188mm.
Handle thickness: 14mm.
Weight: 106g.
Locking system: Crossbar Lock
Clip: Removable, contoured titanium
Packaging: Cardboard box with Viper logos
Notes: Design by Denis Simonutti

Oniro is a knife that was born out of Viper's first collaboration with Denis Simonutti, as well as the first Viper folding knife to employ the crossbar lock, a safe and practical lock system to use.

With compact dimensions and an ergonomic design, this knife stands out for its adaptability and reliability. Ribs on the handle provide a firm and comfortable grip, allowing precise control in any situation. The Magnacut steel drop blade of this knife offers impeccable cutting precision, making it an indispensable tool for any task.

Innovative, durable and ready to overcome any challenge, our new Oniro knife is the ideal choice for those seeking maximum functionality without compromising on quality.

Intended Use: EDC / Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: CPM-Magnacut steel
Blade Finish: Stonewashed
Handle: Micarta with internal stainless steel folders and steel spacers
Blade Length: 85mm.
Blade thickness: 3.5mm.
Length when closed: 106mm.
Total length: 188mm.
Handle thickness: 14mm.
Weight: 106g.
Locking system: Crossbar Lock
Clip: Removable, contoured titanium
Packaging: Cardboard box with Viper logos
Notes: Design by Denis Simonutti

The Nordlys is a fixed blade full tang knife with a partially concealed tang. The slim, ergonomic handle is made of suretouch and features a three-dimensional textured surface for a secure and comfortable grip. This elegant tool comes with a high-quality genuine leather sheath.

The handle uses the brand new UltreX composite, a perfect material for modified G-10 grips. SureTouch is a revolutionary new patent-pending process that combines layers of G-10 with rubber. Now you can have the strength and durability of G-10 with the grip and non-slip properties of rubber, all in one material. 

Jens Ansø is a renowned Danish knife designer. Since 2001, he has been creating unique knives by combining functionality and aesthetics. Ansø is known for using high-quality materials and innovative designs. He collaborates with prestigious brands and produces custom knives that are appreciated by collectors and users worldwide.

Intended Use: Outdoor & Hunting

Type of production: Industrial
Country of Production: Italy
Blade: Full Tang in N690Co stainless steel
Blade Finish: Stonewashed
Handle: UltreX SureTouch
Blade Length: 97mm.
Blade thickness: 4mm.
Total length: 207mm.
Weight: 146g.
Sheath: leather
Packaging: cardboard box with Viper logos
Notes: Design by Jens Anso

The Nordlys is a fixed blade full tang knife with a partially concealed tang. The slim, ergonomic handle is made of carbon fiber, wood, suretouch or micarta and features a three-dimensional textured surface for a secure and comfortable grip. This elegant instrument comes with a high-quality genuine leather sheath for protection and durability, making it ideal for discerning enthusiasts and collectors.

Jens Ansø is a renowned Danish knife designer. Since 2001, he has been creating unique knives by combining functionality and aesthetics. Ansø is known for using high-quality materials and innovative designs. He collaborates with prestigious brands and produces custom knives that are appreciated by collectors and users worldwide.

Intended Use: Outdoor & Hunting

Type of production: Industrial
Country of Production: Italy
Blade: Full Tang in N690Co stainless steel
Blade Finish: Stonewashed
Handle: Micarta
Blade Length: 97mm.
Blade thickness: 4mm.
Total length: 207mm.
Weight: 146g.
Sheath: leather
Packaging: cardboard box with Viper logos
Notes: Design by Jens Anso

The Nordlys is a fixed blade full tang knife with a partially concealed tang. The slim, ergonomic handle is made of carbon fiber, wood, suretouch or micarta and features a three-dimensional textured surface for a secure and comfortable grip. This elegant instrument comes with a high-quality genuine leather sheath for protection and durability, making it ideal for discerning enthusiasts and collectors.

Jens Ansø is a renowned Danish knife designer. Since 2001, he has been creating unique knives by combining functionality and aesthetics. Ansø is known for using high-quality materials and innovative designs. He collaborates with prestigious brands and produces custom knives that are appreciated by collectors and users worldwide.

Intended Use: Outdoor & Hunting

Type of production: Industrial
Country of Production: Italy
Blade: Full Tang in N690Co stainless steel
Blade Finish: Satin finish
Handle: Bocote wood
Blade Length: 97mm.
Blade thickness: 4mm.
Total length: 207mm.
Weight: 146g.
Sheath: leather
Packaging: cardboard box with Viper logos
Notes: Design by Jens Anso

The Nordlys is a fixed blade full tang knife with a partially concealed tang. The slim, ergonomic handle is made of carbon fiber, wood, suretouch or micarta and features a three-dimensional textured surface for a secure and comfortable grip. This elegant instrument comes with a high-quality genuine leather sheath for protection and durability, making it ideal for discerning enthusiasts and collectors.

Jens Ansø is a renowned Danish knife designer. Since 2001, he has been creating unique knives by combining functionality and aesthetics. Ansø is known for using high-quality materials and innovative designs. He collaborates with prestigious brands and produces custom knives that are appreciated by collectors and users worldwide.

Intended Use: Outdoor & Hunting

Type of production: Industrial
Country of Production: Italy
Blade: Full Tang in N690Co stainless steel
Blade Finish: Satin finish
Handle: Carbon fiber
Blade Length: 97mm.
Blade thickness: 4mm.
Total length: 207mm.
Weight: 146g.
Sheath: leather
Packaging: cardboard box with Viper logos
Notes: Design by Jens Anso

Jarno Movilli is a skilled cutler from Reggio Emilia, known for his unique style. His fixed blade creations are distinguished by the use of natural materials for the handles. According to the master, a knife must not only cut well and for a long time, but also arouse emotion during use.

Lui's knives, with a classic design, are ideal for hunters, fishermen and outdoor enthusiasts, as well as collectors. 

The sheaths are made of leather by the specialized company Wild Hog, also from Reggio Emilia.

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available No
* Sharpening: Original
* Marks on blade: NO
* Marks on handle: NO
*Packaging: NO
* Sheath: Leather, handcrafted
* Manuals, Certificates and Warranties: NO
* Checked and certified by our internal laboratory

Intended use: hunting / collection

Type of production: artisanal
Country of production: Italy
Blade: ATS34 steel at 60/61 HRC
Blade finish: mirror with hammering
Handle: horn tip with stabilized briar wood insert
Blade length:  90mm.
Blade thickness: 4mm.
Total length: 213mm.
Weight: 185g.
Sheath: artisanal, in leather, hand-sewn made by Wild Hog
Packaging: NO
Note:

In designing the Belone, Danish Jesper Voxnaes started from typical lines of the Italian regional tradition, perfectly reworked according to his modern, minimalist style that has made him famous worldwide. The result is a light, tapered folding knife embellished with refined details, such as the holes in the back of the handle.
The Böhler M390 Microclean steel gives the Belone excellent cutting qualities, and the ball bearings make it the fastest flipper opening, perfectly integrated into the overall design. The carefully crafted ergonomically designed handle has an anodized titanium frame enclosed between thin carbon fiber folders. The Belone's clip is attached to the spacer so that the knife disappears completely into the pocket, maintaining maximum discretion.

Intended Use: Sporting / EDC

Production type: Industrial
Country of manufacture: Italy
Blade: Stainless steel M390 60-61HRC
Blade Treatment: Satin finish
Handle: Stonewashed titanium and forged carbon fiber "Dark Matter" in blue color
Blade length: 85mm.
Blade thickness: 3.4mm.
Length closed: 114mm.
Total length: 200mm.
Thickness when closed:11.3mm.
Weight: 78g.
Closure: Frame Lock
Clip: anodized titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No.
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratory

Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: stainless steel RWL34 hardened to 59/60 HRC
Blade finish: satin finish
Handle: amber Sambar stag with 416 stainless steel guard and pommel
Blade length: 107mm.
Blade thickness: 3.5mm.
Total length: 220mm.
Weight: 181g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.

Designed by master designer Fabrizio Silvestrelli, Moon is Viper's first knife to adopt the hardened "button lock," a locking mechanism that is activated by a button on the handle. This type of lock provides a secure and reliable lock for the blade. 

A state-of-the-art steel such as MagnaCut was chosen for the blade: a high-strength steel known for its hardness and edge retention capacity. Thanks to these properties, the blade is able to tackle a variety of tasks without any problems. 

The handle has an ergonomic and comfortable grip. The 3D finish gives the handle a unique look and provides a secure grip during use. The handle is precisely designed to fit the shape of the hand, ensuring optimal control of the knife.

Intended Use: Sporting

Production type: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut 61/62HRC steel
Blade finish: Satin finish
Handle: Dark Matter Carbon Fiber in Green color, double 420 stainless steel liner with GR2 titanium spacer and 303/305 stainless steel hardware
Blade length: 87mm (cutting edge of 75mm.)
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed:18mm.
Weight: 140g.
Closure: Button Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio Silvestrelli

Designed by master designer Fabrizio Silvestrelli, Moon is Viper's first knife to adopt the hardened "button lock," a locking mechanism that is activated by a button on the handle. This type of lock provides a secure and reliable lock for the blade. 

A state-of-the-art steel such as MagnaCut was chosen for the blade: a high-strength steel known for its hardness and edge retention capacity. Thanks to these properties, the blade is able to tackle a variety of tasks without any problems. 

The handle has an ergonomic and comfortable grip. The 3D finish gives the handle a unique look and provides a secure grip during use. The handle is precisely designed to fit the shape of the hand, ensuring optimal control of the knife.

Intended Use: Sporting

Production type: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut 61/62HRC steel
Blade Finish: Stonewashed
Handle: Natural Canvas Micarta, double 420 stainless steel liner with GR2 titanium spacer and 303/305 stainless steel hardware
Blade length: 87mm (75mm. cutting edge).
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed:18mm.
Weight: 140g.
Closure: Button Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio Silvestrelli

Designed by master knife maker Fabrizio Silvestrelli, Moon is Viper's first knife to adopt the hardened "button lock."

The handle uses the brand new UltreX SureTouch composite in modified G-10.

SureTouch is a revolutionary new patent-pending process that combines layers of G-10 with rubber. Now you can have the strength and durability of G-10 with the grip and non-slip properties of rubber, all in one material. 

The combination of G-10 and rubber offers one of the most revolutionary advantages on the market. Because G10 is commonly processed for the knife and gun industry, this new material allows for greater ease of use. SureTouch allows for improved grip and comfort.

Intended Use: Sporting

Type of production: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 61/62HRC steel
Blade finish: Stonewashed
Handle: UltreX SureTouch (modified G10 with rubberized, non-slip exterior) with double 420 stainless steel liner with GR2 titanium spacer and 303/305 stainless steel hardware
Blade length: 87mm (cutting edge of 75mm.)
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed:18mm.
Weight: 140g.
Closure: Button Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio Silvestrelli

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: 03/1990 model, in like-new condition
* Commercially available: Unique knife, entirely custom made and hand-engraved
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks of time.
* Manuals, Certificates and Warranties: Certificate of authenticity with date of manufacture and craftsman's signature.
* Checked and Certified by our in-house workshop

Intended Use: Collection/Gentleman

Type of production: Handcrafted
Country of Production: Germany
Blade: stainless steel CPM-T440V at 60HRC
Blade finish: mirror polish
Handle: integral from solid, fully hand-engraved, with fossil ivory grips and red micarta spacers
Blade length: 93mm
Blade thickness: 4mm.
Total length: 203mm.
Weight: 99g.
Sheath: Leather
Packaging: -
Notes: rare handcrafted knife made in March 1990 by well-known German knifemaker Peter Herbs, a member of the German Knifemakers' Guild and a member of the very prestigious American Knifemakers' Guild.

Katla, designed by Jesper Voxnaes, is a liner lock folding knife, featuring a Tanto profile blade with a bevel that enhances the excellent cutting qualities of the Böhler M390, hardened at 59/61 HRC.

The rotating mechanism is provided by thrust bearings, and it can be opened with either the double thumb stud or the very fast flipper.

The detail that characterizes the Katla is the 3D processing of the handle at both ends of the bolster, which reinterprets in a modern key, the inlays of the classic Viper models.

The flat edges and the titanium clip allow for comfortable and discreet carry.

Intended use: EDC / Sport

Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 60/61HRC
Blade finish: Stonewashed
Handle: Walnut
Blade length: 82mm.
Blade thickness: 4mm.
Closed length: 116mm.
Total length: 198mm.
Weight: 107g.
Lock: Liner Lock
Clip: Titanium
Packaging: Cardboard box with Viper logos
Notes: Design by Jesper Voxnaes - opening with Carson Flipper system on ball bearing

Intended Use: Tactical/Sporting

Production type: Industrial
Country of Production: Italy
Blade: Elmax SuperClean 59/61HRC stainless steel
Blade Finish: Stonewashed
Handle: canvas micarta handle, 1.4116 stainless steel liners and GR2 titanium spacer
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: 115mm.
Total length: 210mm.
Weight: 145g.
Closure: liner lock with integrated Smart Automatic Safe Lock System.
Clip: stainless steel 1.4116, removable and reversible
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio "Silvester" Silvestrelli

Connoisseurs know the value of a good knife. Viper honors this thought with the Vale as a high-quality EDC knife with selected materials. The MagnaCut blade opens smoothly via the thumb stud and is locked by the sturdy liner lock. The handle uses the brand new UltreX composite, a perfect material for modified G-10 handles.

SureTouch is a revolutionary new patent-pending process that combines layers of G-10 with rubber. Now you can have the strength and durability of G-10 with the grip and non-slip properties of rubber, all in one material. 

The combination of G-10 and rubber offers one of the most revolutionary advantages on the market. Because G10 is commonly processed for the knife and gun industry, this new material allows for greater ease of use. SureTouch allows for improved grip and comfort.

Intended Use: Gentleman/EDC

Type of production: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut 61/62HRC steel
Blade Finish: Stonewashed
Handle: UltreX SureTouch (modified G10 with rubberized, non-slip exterior)
Blade length: 75mm (cutting edge of 68mm.)
Blade thickness: 4mm.
Length closed: 111mm.
Total length: 184mm.
Thickness when closed:15mm.
Weight: 105g.
Closure: Liner Lock
Clip: anodized titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Enthusiasts know the value of a good knife. Viper honors this idea with its high quality EDC knife, called Vale, made with selected materials. The MagnaCut blade opens smoothly with the thumb stud and is locked in place with the sturdy liner lock. The walnut handle features carvings on the back of the blade, providing a pleasant feel and safe working. The backspacer made of high-quality titanium completes the harmonious look of the knife. It also features a lanyard loop and a flip-over clip

Intended use: Gentleman/EDC

Type of production: Industrial
Blade production: Italy
Blade: CPM MagnaCut steel
Blade Treatment: Satin
Handle: walnut wood
Blade length: 68mm.
Blade thickness: 4mm.
Closed length: 111mm.
Total length: 184mm.
Closed thickness: 15mm.
Balancing: -
Weight: 95g.
Closure: Liner Lock
Clip: in titanium
Scabbard: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Intended use: Gentleman/EDC

Type of production: Industrial
Blade production: Italy
Blade: CPM MagnaCut steel
Blade Treatment: Stonewashed
Handle: Purple Dark Carbon Fiber
Blade length: 68mm.
Blade thickness: 4mm.
Closed length: 111mm.
Total length: 184mm.
Closed thickness: 15mm.
Balancing: -
Weight: 105g.
Closure: Liner Lock
Clip: in anodized titanium
Scabbard: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Intended use: Gentleman/EDC

Type of production: Industrial
Blade production: Italy
Blade: CPM MagnaCut steel
Blade Treatment: Stonewashed
Handle: Micarta
Blade length: 68mm.
Blade thickness: 4mm.
Closed length: 111mm.
Total length: 184mm.
Closed thickness: 15mm.
Balancing: -
Weight: 105g.
Closure: Liner Lock
Clip: in anodized titanium
Scabbard: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Intended use: Sporting/EDC

Production type: Industrial
Country of Production: Maniago - Italy
Blade: Bohler M390 Microclean stainless steel, HRC 59/61
Blade treatment: Satin finish
Handle: Titanium insignia, Micarta Natural grips
Blade length: 77mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 176mm.
Thickness when closed: 10mm.
Weight: 77g.
Closure: Slipjoint
Sheath: Leather
Packaging: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio Silvestrelli

Intended use: Sport
Type of production: Industrial
Blade production: Italy
Blade: Uddeholm ELMAX SuperClean steel, HRC 59/61
Blade treatment: Dark stone washed
Handle: Canvas micarta green
Blade length: 108mm.
Blade thickness: 4.2mm.
Closed length: 143mm.
Total length: 253mm.
Closed thickness: 19mm.
Balancing: - Weight: 250g.
Closure: Back Lock with two wire springs
Clip: Tempered AISI420 steel with stonewashed treatment
Scabbard: -
Packaging: Cardboard box with Viper logos
Notes: Design by Fabrizio "Sylvester" Silvestrelli

Intended Use: Sporting

Production type: Industrial
Country of Production: Italy
Blade: full tang in Elmax SuperClean 59/61HRC stainless steel
Blade finish: Stonewashed
Handle: G10 Two-tone
Blade length: 70mm.
Blade thickness: 3.5mm.
Total length: 170mm.
Weight: 105g.
Sheath: kydex, with UltiClip attachment clip
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Intended Use: Sporting / Hunting

Production type: Industrial
Country of Production: Italy
Blade: full tang in Elmax SuperClean 59/61HRC stainless steel
Blade finish: Satin finish
Handle: Carbon Fiber
Blade length: 67mm.
Blade thickness: 3.5mm.
Total length: 167mm.
Weight: 100g.
Sheath: kydex, with UltiClip attachment clip
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: Italy
Blade: Sintered stainless steel Lohmann LO-QPM20-4
Blade finish: Dark Stonewashed
Handle: GR5 Dark Stonewashed Titanium with anodized titanium spacer
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 208mm.
Thickness when closed: 12mm.
Weight: 137g.
Closure: Frame Lock
Clip: anodized titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jens Anso

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: Italy
Blade: Sintered stainless steel Lohmann LO-QPM20-4
Blade finish: Satin finish
Handle: Titanium GR5 with anodized titanium spacer
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 208mm.
Thickness when closed: 12mm.
Weight: 137g.
Closure: Frame Lock
Clip: anodized titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jens Anso

Intended Use: Sporting/EDC

Type of production: Industrial
Country of Production: Maniago - Italy
Blade: Bohler M390 Microclean stainless steel, HRC 59/61
Blade treatment: Satin finish
Handle: bronze, dark stonewashed, CNC machined, with Stars design
Blade length: 71mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 184mm.
Thickness when closed: 14mm.
Weight: 85g.
Closure: Slipjoint
Sheath: leather
Packaging: cardboard box with Viper Knives logos
Notes: Design by Sacha Thiel

Intended use: Sports / EDC

Type of production: Industrial
Production Lama: Italy
Blade: In stainless steel N690Co 57 / 59HRC
Blade treatment: Satin
Handle: Bocote wood with internal 420C liners and anodized GR2 titanium spacer
Blade length: 73mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 182mm.
Weight: 90g.
Closure: patented Action Stopper system
Clip: Satin stainless steel
Packaging: cardboard box with Viper logos
Notes: Design by Tommaso Rumici

Katla, designed by Jesper Voxnaes, is a liner lock folding knife, which revives the Tanto profile blade with a bevel that enhances the excellent cutting qualities of the Böhler M390, hardened at 59/61 HRC.
The rotation mechanism is given by thrust bearings, and can be opened with the double peg for the thumb, or with the very fast pinball machine.
The detail that characterizes the Katla is the 3D processing of the handle on both ends of the cheek which recalls, reworking them in a modern key, the insignia of the most classic Viper models.
The flat edges and the titanium clip allow a comfortable and discreet port.

Intended use: EDC / Sports

Type of production: Industrial
Country of production: Italy
Blade: M390 60 / 61HRC stainless steel
Blade finish: Stonewashed
Handle: Satinized titanium 3D processing
Blade length: 82mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 198mm.
Weight: 137g.
Closure: Liner Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes - opening via Carson Flipper system on ball bearing

Intended use: Sports

Type of production: Industrial
Country of production: Italy
Blade: full tang in stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: Marbled carbon fiber
Blade length: 67mm.
Blade thickness: 4mm.
Total length: 154mm.
Weight: 95g.
Sheath: in Kydex
Packaging: cardboard box with Viper logos
Notes: design by Tommaso Rumici

In designing the Belone, the Danish Jesper Voxnaes started from typical lines of the Italian regional tradition, perfectly reworked according to his modern and minimalist style that made him famous all over the world. The result is a light and tapered folding knife, embellished with refined details, such as the holes in the back of the handle.
The Böhler M390 Microclean steel gives the Belone excellent cutting properties, and the ball bearings make it the opening with the very fast pinball machine, perfectly integrated into the overall design. The handle, with well-kept ergonomics, has an anodized titanium structure, enclosed in thin titanium folders.
The Belone clip is attached to the spacer so that the knife disappears completely into the pocket, maintaining maximum discretion.
Intended use: Gentleman / EDC

Type of production: Industrial
Lama production: Italy
Blade: Stainless steel M390 60-61 hrc
Lama treatment: Stonewashed
Handle: Titanium
Blade length: 85mm.
Blade thickness: 3.4mm.
Length closed: 114mm.
Total length: 200mm.
Thick when closed: 11.3mm.
Balancing: -
Weight: 87g.
Closure: Frame Lock
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Intended use: Light Utility / Hunting

Type of production: Industrial
Country of production: Italy
Blade: Full Tang in N690Co stainless steel
Blade treatment: satin finish
Handle: olive wood
Blade length: 115mm.
Blade thickness: 5mm.
Total length: 250mm.
Balancing: 3cm back
Weight: 245g.
Sheath: brown leather
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio Silvestrelli

Intended use: hunting / sporting

Type of production: Industrial
Country of production: Italy
Blade: full tang in stainless steel M390 59 / 60HRC
Blade treatment: Satin
Handle: Carbon fiber
Blade length: 88mm.
Blade thickness: 3.8mm.
Total length: 200mm.
Balancing: -
Weight: 108g.
Sheath: in Kydex
Packaging: cardboard box with Viper logos
Notes: design by Jesper Voxnaes

Intended use: hunting / sporting

Type of production: Industrial
Country of production: Italy
Blade: full tang in stainless steel N690Co 58 / 60HRC
Blade treatment: Stonewashed
Handle: Micarta
Blade length: 88mm.
Blade thickness: 3.8mm.
Total length: 200mm.
Balancing: -
Weight: 110g.
Sheath: in Kydex
Packaging: cardboard box with Viper logos
Notes: design by Jesper Voxnaes

Typical Sicilian knife originally from Catania, in use since the mid-nineteenth century. Is characterized by the truncated blade tip, similar to a barber-free hand-shaver.

Purpose: Collection / Sportsman

Type of production: Industrial
Country of production: Maniago - Italy
Blade: Stainless steel 1.4116 55 / 57HRC
Blade treatment: satin finish
Handle: Bovine horn point
Blade Length: 85mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 205mm.
Weight: 100g.
Closure: double spring retention on inner liners
Sheath: Suede leather bag with Viper logos
Packing: black cardboard case with silver logos, warranty certificate
Notes: numbered copies with limited edition of 1,000 pieces - Design by Fabrizio "Silvester" Silvestrelli

Use: Light Utility

Type of production: Industrial
Production Country: Italy
Blade: Carbon steel D2 59 / 60HRC
Blade Treatment: Blackwash
Handle: Canvas Micarta
Blade length: 105mm.
Blade thickness: 5.8mm.
Overall length: 227mm.
Balancing: backward 2cm
Weight: 260g.
Sheath: Nylon, compatible M.O.L.L.E. by Vega
Packaging: cardboard box with Viper and logos Tecnocut
Notes: Design by Tommaso Rumici

Use: Light Utility

Type of production: Industrial
Production Country: Italy
Blade: Carbon steel D2 59 / 60HRC
Blade Treatment: Blackwash
Handle: Canvas Micarta
Blade length: 105mm.
Blade thickness: 5.8mm.
Overall length: 227mm.
Balancing: backward 2cm
Weight: 260g.
Sheath: Nylon, compatible M.O.L.L.E. by Vega
Packaging: cardboard box with Viper and logos Tecnocut
Notes: Design by Tommaso Rumici

Use: Light Utility

Type of production: Industrial
Production Country: Italy
Blade: Carbon steel D2 59 / 60HRC
Blade Treatment: Blackwash
Handle: Canvas Micarta
Blade length: 125mm.
Blade thickness: 5.8mm.
Overall length: 252mm.
Balancing: back 1cm
Weight: 280g.
Sheath: Nylon, compatible M.O.L.L.E. by Vega
Packaging: cardboard box with Viper and logos Tecnocut
Notes: Design by Tommaso Rumici

Use: Light Utility

Type of production: Industrial
Production Country: Italy
Blade: Carbon steel D2 59 / 60HRC
Blade Treatment: Blackwash
Handle: Canvas Micarta
Blade length: 125mm.
Blade thickness: 5.8mm.
Overall length: 252mm.
Balancing: back 1cm
Weight: 280g.
Sheath: Nylon, compatible M.O.L.L.E. by Vega
Packaging: cardboard box with Viper and logos Tecnocut
Notes: Design by Tommaso Rumici

Intended use: Sports / EDC

Type of production: Industrial
Production Country: Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: Satin finish
Handle: Carbon Fiber and Titanium
Blade length: 86mm.
Blade thickness: 4mm.
Closed Length: 124mm.
Overall length: 210mm.
Thick when closed: 18mm.
Weight: 114g.
Lock: Frame Lock with steel casement
Clip: anodized titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Intended use: Sports / EDC

Type of production: Industrial
Production Country: Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: Stonewashed
Handle: Titanium and G10
Blade length: 86mm.
Blade thickness: 4mm.
Closed Length: 124mm.
Overall length: 210mm.
Thick when closed: 18mm.
Weight: 110g.
Lock: Frame Lock with steel casement
Clip: anodized titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Intended use: Sports / EDC

Type of production: Industrial
Production Country: Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: Satin finish
Handle: Titanium
Blade length: 86mm.
Blade thickness: 4mm.
Closed Length: 124mm.
Overall length: 210mm.
Thick when closed: 18mm.
Weight: 115g.
Lock: Frame Lock with steel casement
Clip: anodized titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes

Intended use: Allround Utility

Type of production: Industrial
Production Blade: Italy
Blade: Carbon steel D2 58 / 59HRC
Treatment Blade: Stonewashed
Handle: Canvas Micarta
Blade length: 125mm.
Blade thickness: 4.8mm.
Length closed: -
Overall length: 260mm.
Thickness when folded: -
Balancing: back 1cm
Weight: 260g.
Closed: -
Clip: -
Sheath: Nylon and ABS compatible M.O.L.L.E
Packaging: cardboard box neutral
Notes: Design by Jesper Voxnaes

Destinazione d'uso: sportivo/gentleman

Tipo di produzione: industriale
Produzione Lama: Italia
Lama: in acciaio inox Sandvik 12C27
Finitura lama: Satinatura
Manicatura: in Cocobolo, con liners annegati in acciaio inox
Lunghezza lama: 49mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 75mm.
Spessore da chiuso: 12mm.
Lunghezza totale: 125mm.
Bilanciatura: -
Peso: 60g.
Chiusura: Liner Lock
Clip: -
Fodero: astuccio in pelle nera
Note: design by Fabrizio Silvestrelli

Knife typical of the city of Siena and the Tuscan countryside, in use since the first half of the nineteenth century. E 'characterized by a blade with typical shape of a scimitar, or "French".

Intended use: gentleman / collection

Type of production: Industrial
Production Blade: Italy
Blade: 440A stainless steel 55/57HRC
Treatment Lama: -
Handle: olive wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 200mm.
Thick when closed: 17mm.
Balance: -
Weight: 104g.
Clasp: double-retention spring on the inner liners
Clip: -
Sheath: leather suede bag with logos Viper
Packaging: box of black cardboard with silver logos, warranty certificates
Notes: numbered copies with a limited edition of 1,000 pieces - Design by Fabrizio "Silvester" Silvestrelli

Typical knife in the Tuscan and Lazio Maremma, which has been in use since the first half of the nineteenth century. It is present in the criminological museum of Rome. It was used by the rebels of the criminal baths of Civitavecchia.

Purpose: Regional / Sportsman

Type of production: Industrial
Blade production: Italy
Blade: Stainless steel N690Co 57 / 59HRC
Blade Treatment: -
Handle: Cherry Wood
Blade Length: 85mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 200mm.
Closure thickness: -
Balance: -
Weight: 85g.
Closure: double spring retention on inner liners
Clip: -
Sheath: Suede leather bag with Viper logos
Packing: black cardboard case with silver logos, warranty certificates
Notes: numbered copies with limited edition of 1,000 pieces - Design by Fabrizio "Silvester" Silvestrelli

Knife typical of the city of Siena and the Tuscan countryside, in use since the first half of the nineteenth century. It is characterized by a blade with a typical scimitar or "French" shape.

Intended use: gentleman / collection

Type of production: Industrial
Lama production: Italy
Blade: 440A stainless steel 55 / 57HRC
Blade treatment: -
Handle: bovine horn horn tip (ATTENTION: since it is a natural material, the color may change with respect to the knife photographed)
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 200mm.
Thick when closed: 17mm.
Balancing: -
Weight: 104g.
Closure: double retention spring on the internal liners
Clip: -
Sheath: suede leather bag with Viper logos
Packaging: black cardboard case with silver logos, warranty certificates
Notes: numbered copies with limited edition of 1,000 pieces - Design by Fabrizio "Silvester" Silvestrelli

NOTE: The bovine horn used to make the handle is a natural material; the colorations, shades and veins present may vary from what is displayed in the photo in this product sheet


Intended use: knife for mushroom picking

Type of production: industrial
Country of manufacture: Italy
Blade: Nitro-B stainless steel
Blade finish: Satin finish
Handle: Cattle Horn Tip
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 180mm.
Weight: 100g.
Closure: double spring retention Action Stopper System (Slipjoint)
Clip: -
Sheath: leather pocket
Notes: closable mushroom brush made of badger hair - Design by Fabrizio "Silvester" Silvestrelli

Knife typical of the valleys of Bergamo, in use since the first half of the nineteenth century. It is considered one of the most beautiful knives of antique regional tradition for its characteristic shapes and proportions.

Intended use: Regional / Sports

Type of production: Industrial
Lama production: Italy
Blade: Stainless steel N690Co 57 / 59HRC
Blade treatment: -
Handle: Bovine Horn Point (ATTENTION: since it is a natural material, the color may vary from the specimen photographed)
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed: -
Balancing: -
Weight: 105g.
Closure: double retention spring on the internal liners
Clip: -
Sheath: suede leather bag with Viper logos
Packaging: black cardboard case with silver logos, warranty certificates
Notes: numbered copies with limited edition of 1,000 pieces - Design by Fabrizio "Silvester" Silvestrelli