Sport, Military and Collectible Knives | Coltelleria Collini

Intended Use: Sporting

Type of production: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: stonewashed
Handle: micarta
Blade length: 65mm.
Blade thickness: 3mm.
Total length: 148mm.
Weight: 80g.
Clip: stainless steel, removable and reversible, deep pocket type
Closure: Button Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Kean Alfaro

KNIFE RETIRED FROM PRIVATE COLLECTION
* Origin: Retired from a private collection, previously purchased
* Condition: Perfect, Like new, NOS (new old stock)
* Available on the market: 2006 model, out of production
* Sharpness: Factory sharp, never used
* Marks on blade: None
* Marks on handle: None
* Box: Present and in perfect condition
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Checked and Certified by our in-house laboratory

The C70 A.T.R. (At The Ready) embodies the essence of a high-performance tactical folder. Awarded “Knife of the Year 2003” by Knives Illustrated, this model showcases the most advanced technological solutions developed by Spyderco.

The handle, precision-machined from a block of satin-finished stainless steel, is lightened by a series of holes that reduce weight and serve as tactile reference points for quick grip changes. The same holes are replicated on the contoured clip, ensuring balance and consistency in indexing.

The ends of the handle widen into a generous finger choil and a pinky rest, ensuring a stable grip in all conditions. The Compression Lock, fully integrated into the titanium scale, offers maximum strength and is rated for heavy-duty use and MBC applications.

The VG-10 blade, hollow-ground sharp, features a non-sharp swedge and a profile that combines a solid point with excellent penetration and cutting ability. Above the classic Spyderco hole is the Cobra Hood, which naturally guides the thumb during quick opening and acts as a control platform when the knife is in use.

The clip is configurable for both right and left tip-up carry thanks to the pre-drilled holes.

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: Japan
Blade: VG-10 stainless steel
Blade finish: satin
Handle: satin stainless steel
Blade length: 87mm.
Blade thickness: 3 mm.
Closed length: 129 mm.
Total length: 216 mm.
Weight: 150g.
Closure: Compression Lock
Clip: polished stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife from a private collection - NOS (new old stock) in perfect condition, absolutely like new, without even a scratch or sign of use

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, never used, no box 
* Available on the market: in production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: -
* Sheath: Pouch with zip
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house laboratory

THE MAGIC BUTTON FOR HAPPINESS
Have you always thought that happiness couldn't be achieved simply by pressing a button? You were wrong!

Don't confuse it with a switchblade or spring-assisted knife, it is a manually operated knife that slides very smoothly thanks to a ball bearing system, but Miura is above all a unique product in the industry thanks to the combination of a button lock system and an integral handle made of solid titanium, features that have never been seen before in industrial knives. These features, together with its fantastic design, led Miura to win the 2022 Blade Show Imported Knife of the Year award in Atlanta.

Intended use: Sports

Type of production: Industrial
Country of production: Italy
Blade: Bohler M390 Microclean stainless steel hardened to 58/60HRC 
Blade finish: Satin
Handle: Grade 5 Ti6AI4V titanium with 3D machining, CNC machined from solid
Blade length: 69mm.
Blade thickness: 3mm.
Total length: 169mm.
Weight: 72g.
Closure: Button Lock
Clip: titanium, removable and reversible, machined from solid
Packaging: nylon pouch with zip and cardboard box with MKM Maniago Knife Makers logos
Notes: Manual opening system, ball bearings - Winner at the 2022 Atlanta Blade Show as Imported Knife of the Year

The Native Chief takes everything that made the popular Native 5 famous and takes it to the next level: longer, more versatile, and just as precise. This knife combines the elegance of classic materials with modern performance, offering a perfectly functional “old-school” experience.

CPM-CRUWEAR is a premium tool steel developed to offer excellent edge retention, high wear resistance, and good corrosion resistance. Thanks to its fine, homogeneous structure, it maintains its performance even under heavy use, making it ideal for high-quality working and collector's knives.

The Native Chief represents a perfect balance between classic style and modern functionality, with quality materials and a construction designed to last. Ideal for collectors and enthusiasts who appreciate the combination of traditional design and high performance.

Intended use: EDC, Outdoor

Type of production: Industrial
Country of production: USA
Blade: CPM-CruWear 64HRC steel
Blade finish: Satin
Handle: Brown Canvas Micarta
Blade length: 104mm
Blade thickness: 3.2mm
Closed length: 129mm
Total length: 231mm
Weight: 104g
Closure: Back Lock
Clip: Stainless steel, 4 positions, tip-up/tip-down, left/right, removable and reversible
Packaging: Cardboard box with Spyderco logos
Notes: Lanyard hole, ergonomic design, Spydie Hole for quick opening

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in excellent condition, a few imperceptible dark spots/cosmetic oxidation on the stonewashed blade
* Available on the market: Very difficult to find and only available on “drop” from the manufacturer
* Sharpness: Factory sharp
* Marks on blade: A few imperceptible dark spots/cosmetic oxidation on the stonewashed blade
* Marks on handle: A few imperceptible aesthetic marks on the spacer and titanium clip
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our in-house laboratory

Shop Built by Ansø of Denmark

The “Shop Built” line by Ansø of Denmark was created to offer Jens Ansø's original designs in a more accessible and reproducible form than his custom knives, which are traditionally produced in extremely limited quantities. All “Shop Built” models are designed by Jens Ansø in Denmark and made by his team of skilled craftsmen, who take care of every stage of production with great attention to detail.

This product range maintains the same design philosophy, build quality, and craftsmanship that have made Ansø's work famous, but with a more structured and sustainable production process, designed to satisfy a wider audience without compromising on high-quality materials and finishes.

The AROS model

The AROS is a compact and versatile folding knife, designed as a utility tool for everyday use (EDC). Designed by Jens Ansø, it stands out for its unique design and precision engineering, designed to offer superior performance in everyday activities: from opening packages to more controlled cutting and carving.

The AROS features an innovative integral monoblock frame on each side, incorporating pivot screws, button lock, clip, and lanyard hole in a single precision-machined piece. The two parts of the handle are securely joined with titanium screws on the back, ensuring strength and a clean line.

The 2.5-inch (64 mm) blade now features a hollow grind, a new feature that further improves cutting capabilities while maintaining a slim and elegant profile. The flipper tab is designed to ensure quick opening and, once open, also functions as finger protection. The careful shaping of the blade tang contributes to a comfortable and secure grip, confirming Ansø's focus on functionality and user experience.

Intended use: EDC / Sports

Production type: Midtech
Country of production: Denmark
Blade: RWL34 stainless steel
Blade finish: stonewashed
Handle: 6Al4V titanium and micarta
Blade length: 62mm.
Blade thickness: 3mm.
Closed length: 91mm.
Total length: 153mm.
Weight: 57g.
Closure: Button Lock
Clip: solid titanium, removable
Packaging: cardboard box with Anso of Denmark logos, warranty certificates
Notes: previously purchased knife from a private collection, date of manufacture May 2024

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in excellent condition, a few imperceptible dark spots/cosmetic oxidation on the stonewashed blade
* Available on the market: Very difficult to find and only available on “drop” from the manufacturer
* Sharpness: Factory sharp
* Marks on blade: A few imperceptible dark spots/cosmetic oxidation on the stonewashed blade
* Marks on handle: A few imperceptible aesthetic marks on the spacer and titanium clip
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our in-house laboratory

Shop Built by Ansø of Denmark

The “Shop Built” line by Ansø of Denmark was created to offer Jens Ansø's original designs in a more accessible and reproducible form than his custom knives, which are traditionally produced in extremely limited quantities. All “Shop Built” models are designed by Jens Ansø in Denmark and made by his team of skilled craftsmen, who take care of every stage of production with great attention to detail.

This product range maintains the same design philosophy, build quality, and craftsmanship that have made Ansø's work famous, but with a more structured and sustainable production process, designed to satisfy a wider audience without compromising on high-quality materials and finishes.

The AROS model

The AROS is a compact and versatile folding knife, designed as a utility tool for everyday use (EDC). Designed by Jens Ansø, it stands out for its unique design and precision engineering, designed to offer superior performance in everyday activities: from opening packages to more controlled cutting and carving.

The AROS features an innovative integral monoblock frame on each side, incorporating pivot screws, button lock, clip, and lanyard hole in a single precision-machined piece. The two parts of the handle are securely joined with titanium screws on the back, ensuring strength and a clean line.

The 2.5-inch (64 mm) blade now features a hollow grind, a new feature that further improves cutting capabilities while maintaining a slim and elegant profile. The flipper tab is designed to ensure quick opening and, once open, also functions as finger protection. The careful shaping of the blade tang contributes to a comfortable and secure grip, confirming Ansø's focus on functionality and user experience.

Intended use: EDC / Sports

Production type: Midtech
Country of production: Denmark
Blade: RWL34 stainless steel
Blade finish: stonewashed
Handle: 6Al4V titanium and carbon fiber
Blade length: 62mm.
Blade thickness: 3mm.
Closed length: 91mm.
Total length: 153mm.
Weight: 57g.
Closure: Button Lock
Clip: solid titanium, removable
Packaging: cardboard box with Anso of Denmark logos, warranty certificates
Notes: previously purchased knife from a private collection, date of manufacture May 2024

The knife that represented lionSTEEL at the Blade Show Atlanta 2024

This button-lock closable represented lionSTEEL at the Manufacturing Quality Award competition during the Blade Show Atlanta 2024, standing out as one of the most ambitious designs ever developed by the company. Made with an integral frame and sleeve-a true “SOLID® squared”-it is the result of complex ultra-high-precision milling. Each component is designed to fit together perfectly, ensuring excellent performance and impeccable aesthetics.

The blade is handcrafted stainless damascus steel, made by Chad Nichols with a “Scrambled” design. The frame is titanium, while the handle has a carbon fiber insert.

The Manufacturing Quality Award recognition with this model represents an important milestone for lionSTEEL, confirming the company's ongoing commitment to innovation and quality excellence.

Intended Use: Sporty / EDC

Production type: Industrial
Country of Production: Italy
Blade: Stainless damascus steel, handcrafted by Chad Nichols, with “Scrambled” design
Blade Finish: Satin finish
Handle: Titanium billet with carbon fiber insert
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 185mm.
Weight: 86g.
Closure: Button Lock
Clip: stainless steel, removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - IKBS ball bearing opening movement

Quiet precision, elegance on the move.
With an 88.4mm satin D2 blade, the Serene combines clean lines and functional strength. The slim, lightweight gray aluminum handle offers a stable grip and a sleek, modern look.

The ceramic-bearing opening mechanism and spring-regulated button lock ensure a smooth and secure action, while the low weight (97.3g) makes it perfect for everyday use.

Signed SENCUT, Serene is for those seeking balance between minimal design and reliable performance.

Intended Use: Sporty / EDC

Production type: Industrial
Country of manufacture: China
Blade: D2 steel at 59/61HRC
Blade Finish: Satin finish
Handle: Aluminum
Blade Length: 88.4mm
Blade thickness: 3mm
Length closed: 119.1mm
Total Length: 207.5mm
Closure: Button Lock
Weight: 97.3g.
Clip: removable and reversible, stainless steel
Packaging: cardboard box with manufacturer's logos, nylon zippered case, manuals and warranties
Notes: flipper opening system on ceramic ball bearings

Tactical style. Wild Soul.
Featuring a drop point blade with a black 9Cr18MoV steel finish, the Pulsewave is ready for anything. The green Canvas Micarta handle offers a natural, durable and gritty grip, perfect for those who don't compromise.

The ceramic bearing system and button lock with integrated spring ensure smoothness and safety, while the low weight (101.6 g) makes it unobtrusive but ready for action.

Signed SENCUT, the Pulsewave is designed for those seeking character, control and reliability in every movement.

Intended Use: Sporty / EDC

Production type: Industrial
Country of manufacture: China
Blade: 9Cr18MoV stainless steel at 58/60HRC
Blade Finish: Black Coating
Handle: Micarta
Blade Length: 87.7mm
Blade Thickness: 3mm
Length closed: 114.2mm
Total Length: 201.9mm
Closure: Button Lock
Weight: 101.6g.
Clip: removable and reversible, stainless steel
Packaging: cardboard box with manufacturer's logos, nylon zippered case, manuals and warranties
Notes: flipper opening system on ceramic ball bearings

WeKnife's Sylox (WE24027-1) is an extraordinary knife that combines high-quality materials, refined design and impeccable performance.

With a blade made of high-hardness Bohler M390 steel (59-61 HRC), the Sylox offers exceptional cutting strength and a stonewashed and satin finish that enhances its aesthetics. The 6AL4V titanium handle with carbon fiber inserts adds lightness and strength, while the push-button lock mechanism ensures a secure and reliable lock.

With compact dimensions and an attractive design, the Sylox is perfect for those seeking a versatile and functional knife without sacrificing style.

Intended Use: Sporty/Collection

Production Type: Industrial
Country of Production: China
Blade: M390 stainless steel
Blade treatment: black brushed
Handle: anodized titanium, with carbon fiber inserts
Blade length: 96.5mm.
Blade thickness: 3.2mm.
Length closed: 125mm.
Total length: 222mm.
Weight: 143g.
Closure: button lock
Clip: anodized titanium, machined from billet
Packaging: cardboard box with WeKnife logos, nylon case, warranty certificates
Notes: flipper opening system on ball bearings

The BlackFox Atros BF-770 WD is a folding knife with an excellent quality-price ratio. Its VG10 stainless steel blade, with a stone-washed finish, ensures excellent cutting performance and corrosion resistance. The sandalwood handle offers an elegant aesthetic and a comfortable grip.

Intended use: EDC (Everyday Carry)
Production type: Industrial
Country of manufacture: China
Blade: VG10 steel, hardness HRC 59-61
Blade finish: Stone wash
Handle: Wood
Blade length: 85 mm
Blade thickness: 3.0 mm
Closed length: 107 mm
Total length: 200 mm
Locking mechanism: button lock
Clip: AISI 420
Packaging: Box

The Black Fox Atros BF-770 BB is a folding knife with an excellent quality-price ratio. Its VG10 steel blade, with a hardness of HRC 59-61, ensures outstanding cutting performance and long-lasting sharpness. The black PTFE surface treatment not only gives it a sleek appearance but also enhances corrosion resistance and reduces friction during use.

The black G10 handle provides a secure and comfortable grip, while the polished stainless steel screws and AISI 420 clip with black PTFE coating complete the refined design. With a total length of 200 mm and a well-balanced weight, the Atros BF-770 BB is perfect for those looking for a reliable and versatile knife.

Intended use: EDC (Everyday Carry)
Production type: Industrial
Country of manufacture: China
Blade: VG10 steel, hardness HRC 59-61
Blade finish: Black PTFE
Handle: Black G10
Blade length: 85 mm
Blade thickness: 3.0 mm
Closed length: 107 mm
Total length: 200 mm
Locking mechanism: button lock
Clip: AISI 420 with black PTFE coating
Packaging: Box

This exclusive version of the Military 2 features a blade made of CPM 15V, an extraordinary steel that offers the highest wear resistance of any cold-working tool steel available today. With nearly 15 percent vanadium, its unique composition creates a microstructure rich in vanadium carbides, resulting in exceptional cutting performance and unparalleled edge retention.

The limited design of Spyderco's CPM 15V family of knives is further refined through a specialized heat treatment developed by renowned custom knife maker Shawn Houston. This Sprint Run edition of the Military 2 faithfully includes all the proven elements of this model, including the high-strength Compression Lock® mechanism and a four-position pocket clip for total convenience.

To underscore its membership in the CPM 15V family, the knife features brown peel-ply textured G-10 grips, and Shawn Houston's “Triple B” logo laser engraved on the back of the fully flat blade.

CPM 15V is a top-quality steel known for its high vanadium content, which allows for a rich microstructure of high-hardness carbides. This makes it perfect for those looking for a blade that will deliver exceptional performance even in the harshest conditions, with unmatched wear resistance and wire life. Its production is complex and expensive, but the result is a steel that not only offers superior performance, but also holds its edge for a long time.

Intended Use: Sporting/Collection

Type of production: Industrial
Country of manufacture: USA
Blade: Carbon steel CPM-15V
Blade finish: Stonewashed
Handle: G10
Blade length: 102mm.
Blade thickness: 3.7mm.
Length closed: 140mm.
Total length: 242mm.
Weight: 122g.
Closure: Compression Lock
Clip: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: Print Run edition with tempering done by Shawn Houston

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition, knife only, no box and accessories.
* Commercially available Discontinued since the late 1990s.
* Sharpening: Factory.
* Marks on blade: A few small marks given by time.
* Marks on handle: A few small marks given by time.
* Box: -
* Scabbard: -
* Manuals, Certificates and Warranties: No
* Checked and Certified by our in-house laboratory.

Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janick, Keating, Ayoob, Watson and Casillas.

Intended Use: Tactical/Collection
Production Type: Industrial
Country of Production: USA
Blade: 154CM stainless steel with titanium nitriding
Handle: aircraft aluminum with non-slip Kraton inserts
Blade length: 85mm.
Blade thickness: 3.5mm.
Length closed: 115mm.
Total length: 197mm.
Thickness when closed: 13mm
Weight: 108g.
Closure: Button Lock
Clip: removable, stainless steel
Packaging: knife withdrawn from private collection, overall in very good condition

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collector, previously purchased
* Condition: Overall in excellent condition
* Available on the market: Out of production
* Sharpening: Factory edge
* Blade marks: None (the visible stains in the photo are oil on the blade)
* Handle marks: None
* Box: Not available
* Sheath: Present, in Nylon
* Manuals, Certificates, and Warranties: Not available
* Checked and Certified by our internal laboratory

The MARK I is an innovative tactical/military knife, designed by Duane Dieter, produced in the late '90s and has immediately become an icon in the knife-making world.

Master of Defense, an eclectic American brand that is no longer active and was later acquired by Blackhawk! Blades, produced various folding and fixed tactical and military knives, all created in collaboration with well-known knifemakers such as Elishewitz, Janick, Keating, Ayoob, Watson, and Casillas.

Intended use: Tactical / Collection
Type of production: Industrial
Country of production: USA
Blade: 154CM stainless steel with titanium nitride coating
Handle: Aerospace-grade aluminum with non-slip inserts - seatbelt cutter and skull-crusher
Blade length: 95mm.
Blade thickness: 3.5mm.
Total length: 247mm.
Weight: 122g.
Lock: Button Lock with additional safety system
Clip: Removable and reversible, in stainless steel
Sheath: Belt nylon sheath
Packaging: No packaging

Christmas is the time of year when traditions and special moments are enthusiastically celebrated. One such tradition is the advent calendar, and Boker has decided to revisit it in a unique way.

The complete kit for a high-quality pocket knife

Inside, you will find everything you need to assemble a high-quality pocket knife, ready to be assembled. Each day a piece of the knife, which will allow you, in the end, to build your own custom knife. Included in the kit are items such as the blade, several handle customization grips, precision hardware, useful accessories, and a few surprises that will make each day a unique thrill.

Lucas Burnley is dressing up as Santa Claus this time, offering the Boker Plus Aphex Mini in a special version with a button lock and numerous handle configurations. The compact pocketknife is based on the 2020 Boker Plus Collection, and in addition to a D2 ball-bearing blade, the U.S. manufacturer has given ample room for customization. The extensive package includes several handle grips with a wide variety of magnetic inlays, clips, and some small surprises. A set with even more options for customizing your own folding knife.

The Boker Plus pocket knife is sure to become a highlight of any knife collection and the perfect gift for any knife enthusiast. This limited edition includes step-by-step instructions and a detailed YouTube video tutorial.

Intended Use: Collection

Production type: Industrial
Country of manufacture: China
Blade: D2 steel
Blade treatment: Satin
Handle: variable (several alternatives in the kit), depending on how it is configured by the user
Blade length: 78mm.
Blade thickness: 3mm.
Total length: 196mm.
Weight: variable, depending on how it is configured by the user
Clip: according to how it is configured by the user
Closure: Button Lock
Packaging: cardboard advent calendar box, with 24 small boxes inside, containing all the pieces for assembly
Notes: Design by Lucas Burnley - internal paper instructions and step-by-step instructions on screen, via youtube link in qr code

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: New
* Commercially available: Discontinued
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / Collection

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S30V
Blade Finish: Satin finish
Handle: Carbon Fiber and G10 Laminate
Blade Length: 88mm.
Blade thickness: 3.5mm.
Length closed: 118mm.
Total length: 203mm.
Weight: 94g.
Closure: Compression Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife, from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

Type: Previously Purchased and Used
Conditions: In excellent conditions
Available in the market: Out of production since 2010
Sharpening: Factory
Marks on blade: NO
Marks on handle: NO
Box: Present
Sheath: -
Manuals, Certificates, and Warranties: No
Checked and Certified by our internal laboratory
Intended use: Sport / Collection

Type of production: Industrial
Blade Production: USA
Blade: In CPM-S30V stainless steel
Blade finish: Satin
Handle: G10
Blade Length: 87mm.
Blade Thickness: 3.5mm.
Closed Length: 122mm.
Total Length: 210mm.
Weight: 110g.
Closure: Compression Lock
Clip: Painted stainless steel
Packaging: Cardboard box with Spyderco logos
Notes:

THE MAGIC BUTTON FOR HAPPINESS
Did you always think that happiness could not be achieved by simply pressing a button? You were wrong!

Don't confuse it with an assisted-opening or snap-open knife, it's a manual-opening knife that glides super smoothly thanks to a ball bearing system, but Miura is above all a unique product in the industry thanks to the combination of the button lock type system combined with an integral handle made from solid machined titanium, features that together have never before been seen in industrial knives. These features, along with its fantastic design, led the Miura to win the 2022 Blade Show Imported Knife of the Year award in Atlanta.


Intended Use: Sporting

Type of production: Industrial
Country of Production: Italy
Blade: Bohler M390 Microclean stainless steel hardened to 58/60HRC 
Blade Finish: Black PVD Stonewashed
Handle: Titanium Gr. 5 Ti6AI4V Black PVD Stonewashed with 3D machining, CNC machined from billet
Blade length: 69mm.
Blade thickness: 3mm.
Total length: 169mm.
Weight: 72g.
Closure: Button Lock
Clip: titanium, removable and reversible, machined from billet
Packaging: zippered nylon pouch and cardboard box with MKM Maniago Knife Makers logos
Notes: manual opening system, on ball bearings - Winner at the Atlanta 2022 Blade Show as Imported Knife of the Year

We advise our customers that discountische Loyalty are not active for this product

THE MAGIC BUTTON FOR HAPPINESS
Did you always think that happiness could not be achieved by simply pressing a button? You were wrong!

Don't confuse it with an assisted-opening or snap-open knife, it's a manual-opening knife that glides super smoothly thanks to a ball-bearing system, but Miura is above all a unique product in the industry thanks to the combination of the button lock type system combined with an integral handle made from solid machined titanium, features that together have never before been seen in industrial knives. These features, along with its fantastic design, led the Miura to win the 2022 Blade Show Imported Knife of the Year award in Atlanta.




Intended Use: Sporting

Type of production: Industrial
Country of Production: Italy
Blade: Bohler M390 Microclean stainless steel hardened to 58/60HRC 
Blade finish: Satin finish
Handle: Titanium Gr. 5 Ti6AI4V with 3D machining, CNC machined from billet
Blade length: 69mm.
Blade thickness: 3mm.
Total length: 169mm.
Weight: 72g.
Closure: Button Lock
Clip: titanium, removable and reversible, machined from billet
Packaging: zippered nylon pouch and cardboard box with MKM Maniago Knife Makers logos
Notes: manual opening system, on ball bearings - Winner at the Atlanta 2022 Blade Show as Imported Knife of the Year

We advise our customers that discountische Loyalty are not active for this product

Knife withdrawn from private collection - Overall in good condition, has some minor wear marks on the aluminum handle. On the other hand, the blade is in excellent condition and still has the factory sharpening - The knife is without packaging and certificates, but comes with the original Nylon sheath - Checked and certified by our in-house laboratory.




Innovative tactical/military knife, designed by Duane Dieter, produced in the late 1990s and immediately became an icon in the cutlery scene.

Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janick, Keating, Ayoob, Watson and Casillas.




Intended Use: Tactical/Collection
Production type: Industrial
Country of manufacture: USA
Blade: 154CM stainless steel with titanium nitriding
Handle: aircraft grade aluminum with non-slip and skull-crasher inserts
Blade length: 85mm.
Blade thickness: 3.5mm.
Total length: 200mm.
Weight: 122g.
Closure: Button Lock with additional safety system
Clip: removable and reversible, stainless steel
Sheath: made of Nylon with MOLLE attachments

Knife withdrawn from private collection - 2011 model now discontinued and no longer available designed by Allen Elishewitz - Like new, with no special signs of wear and tear - Original factory sharpening in excellent condition - No original packaging - Checked and certified by our in-house laboratory.

Intended Use: Tactical

Production type: Industrial
Country of manufacture: USA
Blade: stainless steel 154CM at 58/60HRC
Blade Finish: Stonewashed
Handle: 3D machined G-10 G-Mascus
Blade length: 108mm.
Blade thickness: 3.5mm.
Length closed: 127mm.
Total length: 227mm.
Thickness when closed: 16mm
Weight: 150g
Closure: Button Lock with security system
Clip: Stonewashed Stainless Steel
Packaging: -
Notes: Design by Allen Elishewitz - knife withdrawn from private collection - like new

Tactical / EDC knife produced in the late 1990s withdrawn from private collection - overall in excellent condition - with factory sharpening in good condition- no packaging or manuals - checked and guaranteed by our in-house laboratory.

Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janick, Keating, Ayoob, Watson and Casillas.

Intended Use: Tactical/Collection
Production type: Industrial
Country of manufacture: USA
Blade: 154CM stainless steel with titanium nitriding
Handle: aircraft aluminum with non-slip Kraton inserts
Blade length: 85mm.
Blade thickness: 3.5mm.
Length closed: 115mm.
Total length: 197mm.
Thickness when closed: 13mm
Weight: 108g.
Closure: Button Lock
Clip: removable, stainless steel
Packaging: knife withdrawn from private collection, overall in very good condition

Intended Use: Sporting

Type of production: Industrial
Country of Production: China
Blade: D2 steel
Blade finish: black coating
Handle: G10
Blade length: 65mm.
Blade thickness: 3mm.
Total length: 148mm.
Weight: 80g.
Locking system: Button Lock
Clip: stainless steel, removable and reversible, deep pocket type
Packaging: cardboard box with BlackFox logos
Notes: Design by Kean Alfaro

Knife withdrawn from a private collection - Rare model produced by the Master of Defense around 2005 - Excellent condition. Never resharpened - Without original box - Checked and certified by our internal laboratory Coltelleria Collini.

Master of Defense, an eclectic American brand no longer in business and later taken over by Blackhawk! Blades, produced various tactical and military type folding and fixed knives, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.

The only copy at our disposal, without box, rare and out of production for many years.

Intended use: Tactical / Collection
Type of production: Industrial
Production Lama: USA
Blade: 154CM stainless steel - DLC
Handle: polymer with aeronautical aluminum inserts with Kraton anti-slip
Blade length: 90mm.
Blade thickness: 3.5mm.
Closed length: 130mm
Total length: 223mm.
Thick when closed: 20mm
Weight: 170g.
Closure: Button Lock
Clip: removable, in stainless steel
Packaging:

Intended use: Tactical

Type of production: Industrial
Production Lama: USA
Blade: 154CM stainless steel at 58 / 60HRC
Blade treatment: Stonewashed
Handle: G-10 3D machined with G-Mascus designs
Blade length: 95mm.
Blade thickness: 3.5mm.
Closed length: 114mm.
Total length: 201mm.
Thick when closed: 11mm
Balancing: -
Weight: 124g
Closure: Button Lock with safety system
Clip: in Stonewashed Stainless Steel
Sheath: -
Packaging: Cardboard box with Hogue logos
Notes: Design by Allen Elishewitz

Destination of use: collection

Type of production: semi-custom
Lama production: USA
Blade: CPM S30V stainless steel
Lama treatment: Satin
Handle: titanium
Blade length: 84mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 204mm.
Thick when closed: 12mm.
Balancing: -
Weight: 114g.
Closing: Plunge Lock
Clip: titanium
Notes: numbered series
Packaging: cardboard with logos Brian Tighe and Friends, Design by Brian Tighe, opening system on ball bearings of type IKBS with Carson Flipper opening

Destination of use: Sports

Type of production: Industrial
Country of production: Taiwan
Blade: Stainless steel CPM-S30V Powder Steel
Blade treatment: Satin
Handle: Carbon Fiber
Blade length: 82mm.
Blade thickness: 3mm.
Length closed: 106mm.
Total length: 184mm.
Weight: 82g.
Locking system: Compression Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: opening by Carson Flipper system on ball bearings

Master of Defense - CQD Mark II by Duane Dieter - knife

Intended use: Tactical / Collection
Type of production: Industrial
Production Lama USA
Blade: 154CM stainless steel with titanium nitride
Handle: aeronautical aluminum with non-slip inserts and skull-crasher
Blade length: 85mm.
Blade thickness: 3.5mm.
Closed Length: -
Overall length: 200mm.
Thick when closed: -
Weight: 122g.
Closure: Button Lock with secure additional system
Clip: removable and reversible, stainless steel
Packaging: cardboard box with logos M.O.D. Master of Defense and warranty certificates - Nylon sheath with MOLLE attacks

Intended use: Sports

Type of production: Industrial
Production Lama: China
Blade: Stainless steel 8Cr13MoV
Treatment Lama: Satin
Handle: Aluminium 6061 T6 aircraft
Blade length: 86mm.
Blade thickness: 3mm.
Length closed: 115mm.
Overall length: 200mm.
Thick when closed: -
Balancing: -
Weight: 127g.
Closure: Button Lock
Clip: removable, stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT, Design by Brian Tighe, opening system with ball bearing type IKBS opening type Carson Flipper

Innovative tactical / military knife, designed by Duane Dieter, produced at the end of the 90s and immediately became an icon in the field of cutlery.

Master of Defense, an eclectic American brand no longer in business and subsequently acquired by Blackhawk! Blades produced various tactical and military types of folding and fixed knives, all made in collaboration with well-known Knifemakers such as Elishewitz, Janick, Keating, Ayoob, Watson and Casillas.

Single copy 867/2000 at our disposal, new and with original boxes, nowhere to be found and discontinued for many years.

Intended use: Tactical / Collection
Type of production: Industrial
Lama production: USA
Blade: 154CM stainless steel with titanium nitriding
Handle: Aeronautical aluminum with non-slip inserts - belt-cutting and skull-crasher
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 247mm.
Thick when closed: -
Weight: 122g.
Closure: Button Lock with additional safety system
Clip: removable and reversible, in stainless steel
Packaging: cardboard box with M.O.D. Master of Defense and warranty certificates

Intended use: Sport

Type of production: Industrial
Production Lama: Germany
Blade: stainless steel 4034
Treatment Lama: -
Handle material: aluminum
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: -
Total length: 200mm.
Thick when closed: 1.5 cm
Balance: -
Weight: 126g.
Closure: Lock Botton
Clip: -
Sheath: -
Packaging: Cardboard box with logos Boker
Notes:

Spyderco - Junior by DiAlex - C150G knife

Intended use: Sport

Type of production: Industrial
Blade Production: Japan
Blade: stainless steel VG-10
Treatment Lama: -
Handle: G-10
Blade length: 82mm.
Blade thickness: 3mm.
Closed Length: 103mm.
Total length: 184mm.
Thick when closed: 10mm.
Balance: -
Weight: 82g.
Closure: Compression Lock
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by DiAlex