Sport, Military and Collectible Knives | Coltelleria Collini

This knife was previously purchased and comes from a private collection
* Origin: Acquired from a private seller, previously purchased
* Condition: Overall in good condition, with some signs of age and a couple of small scratches on the tip of the blade
* Currently available: Currently in the catalog with Desert Ironwood and a stainless steel guard
* Sharpness: Factory-sharpened, could be improved
* Marks on blade: A couple of small scratches on the tip of the knife, possibly due to product handling
* Marks on handle: None
* Box: Present, shows signs of age
* Sheath: Present, like new
* Manuals, Certificates, and Warranties: /
* Inspected and Certified by our in-house laboratory

The “Tre Kronor” line blends the latest martensitic technologies with the ancient roots of the Swedish royal family. In fact, these knives are the only ones that bear the royal symbol of the three crowns on the blade and on the beautiful wooden box that contains the knife and sheath.

The laminated steel used is currently one of the finest industrial steels on the market and consists of an inner layer of 62HRC powder-molded SGPS paired with two outer layers of VG2. The knives thus exhibit exceptional cutting performance, penetration, and edge retention.

Intended Use: Hunting / All-rounder Utility

Production Type: Industrial
Country of Manufacture: Sweden
Blade: 3G laminated stainless steel with a 62 HRC SGPS cutting edge
Blade Finish: Satin
Handle: Riveted cocobolo wood, with nickel silver guard
Blade Length: 100 mm.
Blade thickness: 4.5mm.
Overall length: 215mm.
Weight: 14g.
Sheath: Heavy leather, with vertical belt loop
Packaging: Wooden box with manufacturer’s logos and cardboard outer box
Notes: Knife from a private collection, previously purchased

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A few imperceptible marks due to time.
* Marks on handle: None
* Box: Present
* Scabbard: Present, with a few small marks due to time.
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Hunting / Sporting

Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel rolled 3G (SGPS) 62HRC
Blade Finish: Satin finish
Handle: Micarta Brown
Blade Length: 90mm.
Blade thickness: 4.5mm.
Total Length: 195mm.
Weight: 180g.
Sheath: Brown Leather
Packaging: cardboard box with Fallkniven logos
Notes: previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: in good condition
* Commercially available: Still in catalog
* Sharpening: Original, improvable
* Marks on blade: Small signs of wear
* Marks on handle: Small signs of wear and tear
* Packaging: Complete
* Scabbard: Present, with minimal signs of wear
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Fallkniven Three Kronor TK1

The “Three Kronor” line blends the latest martensitic technologies with the ancient roots of the Swedish royal family.
In fact, these knives are the only ones that can boast the royal symbol of three crowns placed on the blade and on the beautiful wooden box that contains the knife and sheath.
The rolled steel used is currently one of the best industrial steels on the market and is composed of an inner sheet of SGPS from powder, a steel already used for the U2 model, at 62HRC coupled with two outer sheaths of VG2. The knives thus reveal exceptional cutting, penetration and edge-holding qualities.

Blade: Three-layer rolled 3G steel (VG2 and SGPS “Super Gold Powder Stainless Steel” at 62 HRC)
Handle: Cocobolo wood
Blade length: 100 mm.
Blade thickness: 4.5 mm.
Total length: 215 mm.
Weight: 145 g.
Sheath: Black, leather

Knife withdrawn from private collection - Model produced from 2012 to 2016 now no longer available - Specimen in like new condition, supplied with original box - Some small signs of wear on the rear handle, at the height of where the clip rests against the titanium - Checked and certified by our in-house laboratory




Intended Use: Sporting

Production type: Industrial
Country of manufacture: Taiwan
Blade: Stainless steel CTS-XHP
Blade finish: Stone Washed
Handle: Titanium
Blade length: 65mm.
Blade thickness: 4.5mm.
Length closed: 87mm.
Total length: 152mm.
Thickness when closed: -
Weight: 102g.
Closure: Frame Lock
Clip: Stainless Steel
Packaging: Cardboard box with Spyderco logos
Notes: Design by Marcin Slysz - Knife withdrawn from private collection in like-new condition

Spyderco - Techno by Marcin Slysz - C158TI knife

Intended use: Sport

Type of production: Industrial
Production Blade: Taiwan
Blade: stainless steel CTS-XHP
Treatment Blade: Stone Washed
Handle: Titanium
Blade length: 65mm.
Blade thickness: 4.5mm.
Closed Length: 87mm.
Total length: 152mm.
Thick when closed: -
Balance: -
Weight: 102g.
Closure: Frame Lock
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Marcin Slysz

Fallkniven Tre Kronor TK1

The "Tre Kronor" martensitic combines the latest technology with the ancient roots of the Swedish royal family.
These knives, in fact, are the only ones that can boast of a real symbol of the three crowns placed on the blade and on the beautiful wooden box containing the knife and sheath.
The steel laminate used is currently one of the best steel in industrial trade and is composed of a lamina in internal SGPS from dust, steel already used for the U2, to 62HRC coupled to two grips external VG2. The knives reveal so exceptional qualities of cut, penetration and sealing of the wire.

Blade: Stainless 3G three-layer laminate (VG2 and SGPS "Super Gold Powder Stainless Steel" to 62 HRC)
Handle: Cocobolo Wood
Blade length: 100 mm.
Blade Thickness: 4.5 mm.
Total length: 215 mm.
Weight: 145 g.
Sheath: Black leather