Sport, Military and Collectible Knives | Coltelleria Collini

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual; previously purchased and used
* Condition: Mechanically in excellent condition; cosmetically in acceptable condition; shows several signs of use on the blade finish, liners, and handle that do not compromise its use in any way
* Commercially available: Discontinued
* Sharpness: Factory-sharpened; could be improved
* Marks on blade: Several signs of use and wear
* Marks on handle: Several signs of use and wear
* Box: -
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Inspected and certified by our in-house laboratory

The Alpha Three model, an evolution of the Alpha Two, was designed by Dietmar Pohl in collaboration with police and special forces instructors from the H3 Training Division. This knife is engineered for heavy-duty use; thanks to its substantial size, it is well-suited for use while wearing gloves.

Intended Use: Utility / Multi-purpose
Manufacturing Type: Industrial
Blade: D2 steel
Blade Finish: Burnished
Handle: Zytel with internal burnished stainless steel liners
Blade Length: 113 mm
Blade Thickness: 5 mm
Overall Length: 260 mm
Thickness when closed: 18 mm
Balance: 1 cm rearward from the guard
Weight: 260 g
Closure: Back Lock
Packaging: -
Notes: equipped with a skull crusher / glass breaker on the back—knife previously purchased and used, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available: No
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratory

Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: stainless steel RWL34 hardened to 59/60 HRC
Blade finish: satin finish
Handle: amber Sambar stag with 416 stainless steel guard and pommel
Blade length: 107mm.
Blade thickness: 3.5mm.
Total length: 220mm.
Weight: 181g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.

Explore the power of modernity and boldness with the OXYLOS FX-616 OL knife. Embodying the quintessence of contemporary combat readiness and aggressive design, this tool is much more than just a bushcraft knife—it’s an icon of innovation. Featuring an N690Co stainless steel blade that promises durability and strength, paired with a stone-washed surface treatment for a rugged finish, the OXYLOS is ready to tackle any challenge.

Its compact design and futuristic aesthetic capture the eye, embodying the essence of contemporary technology. The black micarta handle offers a secure and comfortable grip, while the stainless steel screws ensure sturdiness and durability. Complete with a leather sheath for safe and stylish transport, the OXYLOS is ready to be the ideal companion for outdoor adventure enthusiasts.

With a total length of 24 cm, a 13 cm blade, and a thickness of 5 mm, this knife is ready to tackle any challenge you may encounter on your outdoor adventures. Masterfully crafted in Italy, the OXYLOS is more than just a knife: it’s an experience, a symbol of exceptional performance and timeless style.

Intended Use: Hunting / Hiking / Bushcraft / Utility

Manufacturing Type: Industrial
Country of Manufacture: Italy
Blade: Full tang, N690Co stainless steel
Blade Finish: Satin
Handle: Olive wood
Blade Length: 130 mm.
Blade thickness: 5 mm.
Overall length: 240 mm.
Balance: On the guard
Weight: 273 g.
Sheath: Leather, belt-mounted, ambidextrous, for horizontal or vertical carry
Packaging: Cardboard box with Fox logos
Notes: -

The lines are stripped down to the essentials; the profile is clean and continuous. This isn’t an aesthetic choice, but the result of a function-oriented design. Every element exists for a specific reason; everything else has been eliminated.

The skeletonized full-tang construction and 4.8 mm blade thickness reflect a different approach: lightness where needed, strength where it counts. The 80 mm blade and 191 mm overall length define a compact yet uncompromising tool.

The AERO FX is built around materials selected to ensure durability, reliability, and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade with a MIL-C-13924 burnished finish, designed to offer corrosion resistance, good edge retention, and ease of resharpening.

The carrying system consists of a dual-configuration Kydex sheath: an ultra-flat, slim solution for discreet carry and an additional interface to expand attachment options. The configuration can be adapted using the Malice clip or paracord, both of which are included.

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Full tang, Nitrogen-alloyed steel
Blade Finish: MIL-C-13924 burnished
Handle: Anodized Anticorodal aluminum
Blade Length: 80mm.
Blade thickness: 4.8 mm.
Overall length: 191 mm.
Weight: 117 g.
Sheath: thermoformed Kydex, can be worn around the neck or on a belt using the included Malice clips
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

The lines are stripped down to the essentials; the profile is clean and continuous. This isn’t an aesthetic choice, but the result of a function-oriented design. Every element exists for a specific reason; everything else has been eliminated.

The skeletonized full-tang construction and 4.8 mm blade thickness reflect a different approach: lightness where needed, strength where it counts. The 80 mm blade and 191 mm overall length define a compact yet uncompromising tool.

The AERO FX is built around materials selected to ensure durability, reliability, and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade with a MIL-C-13924 burnished finish, designed to offer corrosion resistance, good edge retention, and ease of resharpening.

The carrying system consists of a dual-configuration Kydex sheath: an ultra-flat, slim solution for discreet carry and an additional interface to expand attachment options. The configuration can be adapted using the Malice clip or paracord, both of which are included.

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Full tang, Nitrogen-alloyed steel
Blade Finish: MIL-C-13924 burnished
Handle: Anodized Anticorodal aluminum
Blade Length: 80mm.
Blade thickness: 4.8 mm.
Overall length: 191 mm.
Weight: 117 g.
Sheath: thermoformed Kydex, can be worn around the neck or on a belt using the included Malice clips
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

The lines are stripped down to the essentials; the profile is clean and continuous. This isn’t an aesthetic choice, but the result of a function-oriented design. Every element exists for a specific reason; everything else has been eliminated.

The skeletonized full-tang construction and 4.8 mm blade thickness reflect a different approach: lightness where needed, strength where it counts. The 80 mm blade and 191 mm overall length define a compact yet uncompromising tool.

The AERO FX is built around materials selected to ensure durability, reliability, and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade with a MIL-C-13924 burnished finish, designed to offer corrosion resistance, good edge retention, and ease of resharpening.

The carrying system consists of a dual-configuration Kydex sheath: an ultra-flat, slim solution for discreet carry and an additional interface to expand attachment options. The configuration can be adapted using the Malice clip or paracord, both of which are included.

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Full tang, Nitrogen-alloyed steel
Blade Finish: MIL-C-13924 burnished
Handle: Anodized Anticorodal aluminum
Blade Length: 80mm.
Blade thickness: 4.8 mm.
Overall length: 191 mm.
Weight: 117 g.
Sheath: thermoformed Kydex, can be worn around the neck or on a belt using the included Malice clips
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

The lines are stripped down to the essentials; the profile is clean and continuous. This isn’t an aesthetic choice, but the result of a function-oriented design. Every element exists for a specific reason; everything else has been eliminated.

The skeletonized full-tang construction and 4.8 mm blade thickness reflect a different approach: lightness where needed, strength where it counts. The 80 mm blade and 191 mm overall length define a compact yet uncompromising tool.

The AERO FX is built around materials selected to ensure durability, reliability, and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade with a MIL-C-13924 burnished finish, designed to offer corrosion resistance, good edge retention, and ease of resharpening.

The carrying system consists of a dual-configuration Kydex sheath: an ultra-flat, slim solution for discreet carry and an additional interface to expand attachment options. The configuration can be adapted using the Malice clip or paracord, both of which are included.

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Full tang, Nitrogen-alloyed steel
Blade Finish: MIL-C-13924 burnished
Handle: Anodized Anticorodal aluminum
Blade Length: 80mm.
Blade thickness: 4.8 mm.
Overall length: 191 mm.
Weight: 117 g.
Sheath: thermoformed Kydex, can be worn around the neck or on a belt using the included Malice clips
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

The lines are stripped down to the essentials; the profile is clean and continuous. This isn’t an aesthetic choice, but the result of a function-oriented design. Every element exists for a specific reason; everything else has been eliminated.

The skeletonized full-tang construction and 4.8 mm blade thickness reflect a different approach: lightness where needed, strength where it counts. The 80 mm blade and 191 mm overall length define a compact yet uncompromising tool.

The AERO FX is built around materials selected to ensure durability, reliability, and minimal maintenance: an Anticorodal aluminum handle and a Nitrogen steel blade with a MIL-C-13924 burnished finish, designed to offer corrosion resistance, good edge retention, and ease of resharpening.

The carrying system consists of a dual-configuration Kydex sheath: an ultra-flat, slim solution for discreet carry and an additional interface to expand attachment options. The configuration can be adapted using the Malice clip or paracord, both of which are included.

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: Italy
Blade: Full tang, Nitrogen-alloyed steel
Blade Finish: MIL-C-13924 burnished
Handle: Anodized Anticorodal aluminum
Blade Length: 80mm.
Blade thickness: 4.8 mm.
Overall length: 191 mm.
Weight: 117 g.
Sheath: thermoformed Kydex, can be worn around the neck or on a belt using the included Malice clips
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private seller, previously purchased
* Condition: Overall in excellent condition
* Commercial Availability: Discontinued
* Sharpness: Factory-sharpened, could be improved
* Blade Condition: Imperceptible signs of age and a couple of small spots of oxidation
* Handle Condition: Minimal signs of age
* Box: Included
* Sheath: Aftermarket, compatible, made in the USA
* Manuals, Certificates, and Warranties: -
* Inspected and certified by our in-house laboratory

The Cold Steel SRK 38CSM San Mai Made in Japan is one of the most popular and sought-after versions of the famous Survival Rescue Knife (SRK), a model designed for military, survival, and professional outdoor use.

Manufactured in Japan using the renowned San Mai III construction, it combines a high-performance VG-1 steel core with tougher outer layers, offering an excellent balance of cutting ability, strength, and durability.

Thanks to its sturdy clip-point blade, Kray-Ex handle, and the high-quality craftsmanship typical of Cold Steel’s Japanese production, the 38CSM is now considered a modern classic, highly prized by both field users and collectors.

Intended use: tactical / sporting

Production type: Industrial
Country of manufacture: Japan
Blade: laminated stainless steel (San Mai) with VG-1 cutting edge
Blade finish: satin finish
Handle: Kray-Ex (Kraton)
Blade length: 155mm.
Blade thickness: 5 mm.
Overall length: 275 mm.
Balance: on the guard
Weight: 249 g.
Sheath: aftermarket Cordura sheath, made in the USA
Packaging: cardboard box with Cold Steel logos
Notes: discontinued knife, previously purchased, from a private collection

When you need more working space and a blade with more substance, SATRE FX is the answer. It takes the essential design of the Satre and scales it up, improving control and cutting capacity without compromising its ergonomics. It is designed for continuous use, where the hand must not tire and the tool must remain predictable.

SATRE FX is a full-tang fixed blade with a skeletonized frame, designed to maintain good balance even during extended sessions. The more generous geometry offers a larger cutting surface and more stable handling during demanding tasks. The open construction also allows you to customize the handle with Paracord, adapting it to your preferences. The knife comes with a black Kydex sheath, pre-shaped and ready to use.

Configurations and Steels
* N690Co (Black and Stone Washed): a balanced choice between edge retention, impact resistance, and ease of use in the field.
* Nitrogen (Orange and Yellow): greater corrosion resistance, easy resharpening, and high visibility.
* Böhler S600 (Black): high-performance steel, cryogenically treated to 64 HRC, designed for maximum edge retention

Intended use: Sport / Light Utility

Production type: Industrial
Country of origin: Italy
Blade: S600 carbon steel, 64 HRC
Blade finish: Exp Dark
Handle: S600 carbon steel, 64 HRC
Blade length: 95 mm
Blade thickness: 5 mm
Overall length: 190 mm
Weight: 106 g
Sheath: Thermoformed Kydex
Packaging: Cardboard box with Extrema Ratio logos
Notes: Larger version compared to the Satre model

When you need more working space and a blade with more substance, SATRE FX is the answer. It takes the essential design of the Satre and scales it up, improving control and cutting capacity without compromising its ergonomics. It is designed for continuous use, where the hand must not tire and the tool must remain predictable.

SATRE FX is a full-tang fixed blade with a skeletonized frame, designed to maintain good balance even during extended sessions. The more generous geometry offers a larger cutting surface and more stable handling during demanding tasks. The open construction also allows you to customize the handle with Paracord, adapting it to your preferences. The knife comes with a black Kydex sheath, pre-shaped and ready to use.

Configurations and Steels
* N690Co (Black and Stone Washed): a balanced choice between edge retention, impact resistance, and ease of use in the field.
* Nitrogen (Orange and Yellow): greater corrosion resistance, easy resharpening, and high visibility.
* Böhler S600 (Black): high-performance steel, cryogenically treated to 64 HRC, designed for maximum edge retention.

Intended use: Sport / Light Utility

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade Finish: High-visibility treatment
Handle: Nitrogen steel
Blade length: 95 mm
Blade thickness: 5 mm
Overall length: 190 mm
Weight: 97 g
Sheath: Thermoformed Kydex
Packaging: Cardboard box with Extrema Ratio logos
Notes: Larger version compared to the Satre model

When you need more working space and a blade with more substance, SATRE FX is the answer. It takes the essential design of the Satre and scales it up, improving control and cutting capacity without compromising its ergonomics. It is designed for continuous use, where the hand must not tire and the tool must remain predictable.

SATRE FX is a full-tang fixed blade with a skeletonized frame, designed to maintain good balance even during extended sessions. The more generous geometry offers a larger cutting surface and more stable handling during demanding tasks. The open construction also allows you to customize the handle with Paracord, adapting it to your preferences. The knife comes with a black Kydex sheath, pre-shaped and ready to use.

Configurations and Steels
* N690Co (Black and Stone Washed): a balanced choice between edge retention, impact resistance, and ease of use in the field.
* Nitrogen (Orange and Yellow): greater corrosion resistance, easy resharpening, and high visibility.
* Böhler S600 (Black): high-performance steel, cryogenically treated to 64 HRC, designed for maximum edge retention.

Intended use: Sport / Light Utility

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade Finish: High-visibility treatment
Handle: Nitrogen steel
Blade length: 95 mm
Blade thickness: 5 mm
Overall length: 190 mm
Weight: 97 g
Sheath: Thermoformed Kydex
Packaging: Cardboard box with Extrema Ratio logos
Notes: Larger version compared to the Satre model

When you need more working space and a blade with more substance, SATRE FX is the answer. It takes the essential design of the Satre and scales it up, improving control and cutting capacity without compromising its ergonomics. It is designed for continuous use, where the hand must not tire and the tool must remain predictable.

SATRE FX is a full-tang fixed blade with a skeletonized frame, designed to maintain good balance even during extended sessions. The more generous geometry offers a larger cutting surface and more stable handling during demanding tasks. The open construction also allows you to customize the handle with Paracord, adapting it to your preferences. The knife comes with a black Kydex sheath, pre-shaped and ready to use.

Configurations and Steels
* N690Co (Black and Stone Washed): a balanced choice between edge retention, impact resistance, and ease of use in the field.
* Nitrogen (Orange and Yellow): greater corrosion resistance, easy resharpening, and high visibility.
* Böhler S600 (Black): high-performance steel, cryogenically treated to 64 HRC, designed for maximum edge retention.

Intended use: Sport / Light Utility

Production type: Industrial
Country of origin: Italy
Blade: N690Co stainless steel, 58 HRC
Blade finish: MIL-C-13924 burnishing
Handle: N690Co stainless steel, 58 HRC
Blade length: 95 mm
Blade thickness: 5 mm
Overall length: 190 mm
Weight: 99 g
Sheath: Thermoformed Kydex
Packaging: Cardboard box with Extrema Ratio logos
Notes: Larger version compared to the Satre model

Intended use: Sport / Light Utility

Production type: Industrial
Country of origin: Italy
Blade: N690Co stainless steel, 58 HRC
Blade finish: Stonewashed
Handle: N690Co stainless steel, 58 HRC
Blade length: 95 mm
Blade thickness: 5 mm
Overall length: 190 mm
Weight: 99 g
Sheath: Thermoformed Kydex
Packaging: Cardboard box with Extrema Ratio logos
Notes: Larger version compared to the Satre model

Intended use: Sport / Light Utility

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade finish: High-visibility treatment
Handle: Nitrogen steel
Blade length: 70 mm
Blade thickness: 5 mm
Overall length: 163 mm
Weight: 75 g
Sheath: Thermoformed Kydex
Packaging: Cardboard box with Extrema Ratio logos
Notes: Version with high corrosion resistance and high visibility

Intended use: Sport / Light Utility

Production type: Industrial
Country of origin: Italy
Blade: Nitrogen steel
Blade finish: High-visibility treatment
Handle: Nitrogen steel
Blade length: 70 mm
Blade thickness: 5 mm
Overall length: 163 mm
Weight: 75 g
Sheath: Thermoformed Kydex
Packaging: Cardboard box with Extrema Ratio logos
Notes: Version with high corrosion resistance and high visibility

Forged from the legacy of Narsil, Isildur’s glorious sword, the Böker Plus Inarsil is the result of a collaboration between Jörg Sprave and Midgards Messer, a masterpiece of timeless charm. A symbol of hope and courage in Middle-earth, Narsil—whose name evokes Anar (Sun) and Isil (Moon)—was broken during the Battle of the Last Alliance, losing its ancient power forever.

With the Böker Plus Inarsil, that small flame shines once more in the form of a tactical folding knife whose aesthetics are inspired by great fantasy swords. The symmetrical single-edged blade, with a dagger profile, opens quickly and precisely via a ball-bearing-mounted flipper; once open, the flipper also acts as a guard, increasing safety and control during use. The central scabbard and refined satin finish further enhance the “sword-style” look.

Made of D2 steel, the blade guarantees high wear resistance and excellent edge retention, making the Inarsil a reliable companion for both daily use and the most demanding outdoor activities.

The ergonomic handle echoes the perfect symmetry of the tactical design. The weight-reducing milled sections and carefully engineered balance ensure a firm grip and dynamic handling. The front features black G10 scales, while the stainless steel back maintains a classic, robust elegance. The liner lock secures the blade safely and reliably.

To preserve the clean aesthetic inspired by legendary swords, the knife has no pocket clip; instead, a triangular hole on the pommel allows for the attachment of a lanyard.

Intended use: Collectible / Sport

Production type: Industrial
Country of manufacture: China
Blade: D2 steel
Blade finish: dual tone: satin and micro-beaded
Handle: stainless steel with G10 scales
Blade length: 117mm.
Blade thickness: 4.7 mm.
Weight: 432 g.
Overall length: 282 mm.
Clip: -
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Jörg Sprave and Midgards Messer - ball-bearing flipper opening system

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Provenance: Acquired from a private individual; previously purchased and used
* Condition: Structure intact, no functional compromises, fully operational and ready for use. Presence of surface oxidation and signs of aging, consistent with the untreated finish. The absence of a coating has allowed, over the years, the development of a natural patina and signs of oxidation that attest to the authenticity of its use. These elements reinforce its technical character and ensure its longevity.
* Commercial Availability: Discontinued
* Sharpening: Professionally resharpened
* Blade Markings: Surface oxidation and signs of aging
* Handle Markings: None
* Box: /
* Sheath: Handcrafted Kydex, made specifically for this knife
* Manuals, Certificates, and Warranties: /
* Inspected and Certified by our in-house laboratory

The Busse SARsquatch is one of the most iconic models in the Busse Combat Knife Company’s lineup, a direct expression of the design philosophy developed by Jerry Busse: maximum reliability, uncompromising construction, and proven performance in the field.

This specific 2008 Special Edition version stands out for its less common configuration, lacking a protective coating. A choice that at the time favored a more “bare and functional” approach, now particularly appreciated by the most experienced enthusiasts.

For many collectors and users, the SARsquatch represents one of those models that, during its production run, were difficult to find and even harder to purchase. An iconic piece from an era when Busse operated with limited availability and extremely high demand.

At the heart of the SARsquatch is the famous INFI steel, a proprietary alloy developed in-house by Busse, the specific composition details of which have been deliberately kept confidential over time.

In practice, INFI is recognized for: High resilience, suitable for intensive and heavy-duty use; Corrosion resistance superior to the average for non-stainless steels; Good edge retention, with ease of maintenance.

These qualities have helped build the brand’s reputation, making Busse models practical tools for real-world use.

This SARsquatch model is aimed at an audience that understands the value of the Busse project and the context in which it was born. It is not a pristine “collector’s item,” but an authentic knife, true to its operational nature.

It represents a tangible opportunity for those who, in the 2000s, followed the brand and appreciated its products but were unable to easily acquire them: today, it is possible to purchase an original piece, with a distinctive configuration and a history already written, ready to continue being used.

Intended Use: Heavy Duty

Production Type: Handcrafted
Country of Origin: USA
Blade: Full tang, INFI steel at 58/60 HRC
Blade Finish: Uncoated
Handle: Micarta with Raptor-style pattern, secured with 3 pin tubes
Blade Length: 185mm.
Blade Thickness: 5mm.
Overall length: 320 mm.
Balance: Guard-side balanced
Weight: 484 g.
Sheath: Handcrafted Kydex, made specifically for this knife; with modular attachment for vertical belt carry
Packaging: -
Notes: Knife from 2008, previously purchased, from a private collection

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private seller, previously purchased
* Condition: Overall in good condition, with superficial cosmetic marks on the finish caused by insertion and removal from the sheath
* Commercially available: Discontinued
* Sharpness: Factory-sharpened, could be improved
* Marks on blade: Superficial cosmetic marks on the finish caused by insertion and removal from the sheath
* Marks on handle: None
* Box: Included
* Sheath: Included
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory

Intended Use: Tactical/Military

Production Type: Industrial
Country of Manufacture: USA
Blade: CPM-S35VN stainless steel, 59/60 HRC
Blade Finish: Black SpartaCoat
Handle: Canvas Micarta with 3D texture
Blade Length: 130mm.
Blade Thickness: 4.8mm.
Overall Length: 254mm.
Weight: 217g.
Sheath: Nylon, M.O.L.L.E. compatible
Packaging: Cardboard box with Spartan Blades logos
Notes: Design by Lovito/Carey - Knife from a private collection, previously purchased

PREVIOUSLY PURCHASED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private seller, previously purchased
* Condition: Overall in excellent condition, shows some barely noticeable signs of oxidation on the blade and other minor signs of age, especially on the sheath
* Commercially available: Discontinued
* Sharpness: Factory-sharpened, could be improved
* Marks on blade: imperceptible signs of oxidation in a few places, likely from storing the knife in the leather sheath for a long time
* Marks on handle: imperceptible signs of wear
* Box: Included
* Sheath: Included, with some minor signs of wear
* Manuals, Certificates, and Warranties: Included
* Inspected and Certified by our in-house laboratory

The Woodsman version of the H.E.F.T. 4 combines premium materials and practical functionality in a compact 4" format. The Santos wood handle offers a natural, solid, and refined grip, while the Sleipner steel blade ensures an excellent balance between toughness, durability, and edge retention.

The drop-point profile with a high bevel ensures great versatility of use, from precision work to the most demanding outdoor activities. The handle design, clean and free of sharp edges, is engineered to accommodate different grips without tiring the hand.

The set is completed by a leather sheath, ideal for carrying on a belt and perfectly in line with the outdoor spirit of the Woodsman version.

Intended Use: Outdoor / All-rounder utility

Production Type: Industrial
Country of Manufacture: Italy by LionSteel
Blade: Sleipner at 60 HRC
Blade Finish: Stone washed
Handle: Santos wood
Blade Length: 100 mm
Blade Thickness: 5 mm
Total length: 230mm.
Weight: 170g.
Sheath: Leather, belt-mounted, for vertical carry
Packaging: Cardboard box with manufacturer’s logos
Notes: Design by Tommaso Rumici - Manufactured and made in Italy by LionSteel - Discontinued model no longer available on the market, previously purchased, from a private collection

PREVIOUSLY PURCHASED KNIFE, FROM PRIVATE COLLECTION
* Type: new knife, never used, but without sheath and trousseau - a handcrafted kydex sheath was specially made to accompany it during the sale phase
* Condition: 90s version, same as new, never used
* Commercially available Discontinued in this configuration
* Sharpening: Factory
* Signs on blade: None
* Signs on handle: Minimum signs given by time
* Box: -
* Sheath: Kydex, handcrafted and custom made
* Manuals, Certificates and Guarantees: -
* Controlled and Certified by our in-house laboratory

The "Recon Tanto" is an iconic knife produced by Cold Steel, known for its reliability and robustness. First introduced in 1988, the model was designed to be a combat and survival knife, with a design that combines functionality and durability.

Over the years, the "Recon Tanto" has been improved and updated, but has retained its distinctive character and functionality. It has become one of Cold Steel's most recognizable models, thanks to its ability to combine traditional design with modern innovation.

Intended use: collection / tactical / sports

Type of production: Industrial
Country of production: Japan
Blade: stainless steel AUS-8A
Blade treatment: painting
Grip: Kraton
Blade length: 179mm.
Blade thickness: 5mm.
Total length: 298mm.
Balance: advanced
Weight: 265g.
Sheath: Handcrafted in kydex, specially made for this knife
Packaging: -
Note: New knife from the 90s, never used, previously purchased, from a private collection

Designed for tactical and outdoor versatility, the Atreides fixed blade knife offers an imposing presence with a sci-fi twist.

Its sturdy tanto blade, made of durable powder-coated 65Mn steel, offers durability for both intensive cutting and camping tasks. The knurling on the back improves control for precision work, while the thick tang and saber grind excel at cutting.

The overmolded handle can be removed to reveal a balanced skeleton frame. A versatile sheath system ensures safe transport and multiple mounting options, making the Atreides a reliable companion both in the field and in the unknown.

Intended use: all-round utility

Type of production: industrial
Country of production: China
Blade: 65Mn carbon steel
Blade finish: powder coating
Handle: polypropylene with anti-slip treatment
Blade length: 145mm.
Blade thickness: 4.7mm.
Total length: 290mm.
Balance: advanced
Weight: 230g.
Sheath: polypropylene
Notes: -

Intended use: Tactical / Sports

Type of production: Industrial
Country of manufacture: USA
Blade: full tang in CPM-3V carbon steel
Blade treatment: Tigerstripe coating and Cerakote protective treatment
Handle: G10 OD Green with stainless steel guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8 mm.
Weight: 292 g.
Sheath: Kydex, with removable nylon belt attachment system
Packaging: cardboard box with Zero Tolerance logos
Notes: -

RAO STEEL is the outdoor knife to take everywhere: trekking, survival, camping, or simply in your backpack. 5 mm fixed blade, customizable grip, technical sheath.

Designed for those who don't seek fortune but rely on their equipment. Always reliable, everywhere. No compromises.

Derived from the legendary folding RAO, RAO STEEL distills its tactical essence into an even more compact and practical fixed blade version. A knife designed for action, designed to tackle nature and every need in the field. RAO STEEL cuts, carves, and splits.

From wood for lighting a fire to building a shelter, to the most precise tasks when camping or on daily excursions.

RAO STEEL NITROGEN SATIN
For those who love clean and essential functionality: high corrosion-resistant Nitrogen steel, easy to resharpen even with makeshift tools. Satin finish: perfect for outdoor contexts, even in food preparation. Ideal in humid, variable environments and on long journeys.

Intended use: Outdoor / Utility

Type of production: industrial
Country of production: Italy
Blade: full tang, Nitrogen steel
Blade finish: Satin
Handle: monolithic, perforated, Nitrogen steel
Blade length: 87mm.
Blade thickness: 5 mm.
Total length: 190 mm.
Weight: 128 g.
Sheath: Kydex, ambidextrous, with double button loop attachment
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

RAO STEEL is the outdoor knife to take everywhere: trekking, survival, camping, or simply in your backpack. 5 mm fixed blade, customizable grip, technical sheath.

Designed for those who don't leave things to chance but rely on their equipment. Always reliable, everywhere. No compromises.

Derived from the legendary folding RAO, RAO STEEL distills its tactical essence into an even more compact and practical fixed blade version. A knife designed for action, designed to tackle nature and every need in the field. RAO STEEL cuts, carves, and splits.

From wood for lighting a fire to building a shelter, to the most precise tasks when camping or on daily excursions.

RAO STEEL N690 DARK STONE
For those seeking performance and operational simplicity: Böhler N690 steel (58 HRC) with MIL-C-13924 treatment and stone-washed finish. It hides wear and tear, works hard, and doesn't stand out. For those who leave nothing to chance, even in everyday life.

Intended use: Outdoor / Utility

Type of production: industrial
Country of production: Italy
Blade: full tang, N690Co stainless steel at 58HRC
Blade finish: MIL-C-13924 burnishing with Dark Stone finish
Handle: monolithic, perforated, N690Co stainless steel at 58HRC
Blade length: 87mm.
Blade thickness: 5mm.
Total length: 190mm.
Weight: 130g.
Sheath: Kydex, ambidextrous, with double button loop attachment
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

Experience the perfect blend of expertise and design with the KA-BAR Les George Cool Name, a fixed blade knife designed by award-winning knife maker and USMC veteran Les George. A model that represents his expertise gained in the field and a new chapter in the long history of KA-BAR.

Manufactured in the United States, the Cool Name is made of sturdy 1095 Cro-Van carbon steel, prized for its extraordinary toughness and ability to maintain its sharpness. Drop Point blade with durable black finish and flat grind for reliable performance in any situation.

The ergonomic transparent polycarbonate handle, with a honeycomb pattern, is lightweight and durable, with a translucent “smoke” finish, ensuring a firm grip and a unique look. Each knife comes with a Celcon sheath made in the USA for safe and practical carrying.

With optimal balance, the Cool Name is designed as a reliable work tool. More than a knife: a collaboration that brings veteran-tested design and American manufacturing quality to your hands.

Intended use: Bushcraft / Outdoor / All-Round Utility

Type of production: Industrial
Country of manufacture: USA
Blade: 1095 steel at 56/58HRC
Blade finish: Black Traction Coating
Handle: Smoke Honeycomb Transparent Polycarbonate
Blade length: 108mm.
Blade thickness: 4.8mm.
Overall length: 229mm.
Weight: 181g.
Sheath: Belt sheath, ambidextrous, Celcon
Packaging: Cardboard box with KA-Bar and Les George logos
Notes: Design by Les George

Dynamic, mystical, “toxic”: the Böker Plus Midgards Snake captures the senses and leaves no one indifferent. Never before has a fixed blade knife been designed with such skill to tackle any everyday cutting task.

Made entirely of steel, with a stonewashed D2 clip-point blade, it is a lightweight EDC that is always ready for use thanks to the included Kydex sheath. Cardboard, packaging, or ropes yield in an instant to the effective “toxicity” of its blade.

The filigree, sinuous, and enveloping handle offers a secure grip and comfort even in the most demanding jobs, allowing you to hold the knife between your fingers while both hands remain free for other activities. The ergonomics are further enhanced by the non-slip jimping on the thumb rest and the bottom of the handle, whose pointed shape resembles the rattles of a rattlesnake and acts as an emergency glass breaker.

The design is completed by a lanyard hole and a stainless steel clip for the Kydex sheath.

Intended use: Sports knife

Type of production: Industrial
Country of production: China
Blade: D2 steel ful tang
Blade finish: Stonewashed
Handle: -
Blade length: 115mm.
Blade thickness: 5.2 mm.
Total length: 236 mm.
Weight: 146 g.
Sheath: Kydex, with removable, multi-position belt loop
Packaging: cardboard box with Boker Plus logos
Notes: Design by Midgards Messer

The Socom Elite sets the highest standards for tactical/utility knives. Since the original Socom was introduced in 1996, it has been the pioneer of the entire Microtech folding knife line. Over the years, numerous improvements have been made that have made the Socom more adaptable to different environments. You know you are buying the best tool on the market, regardless of which unique blade you choose: the clip point or the tanto. An integrated glass breaker at the base of the handle and a large pivot that allows for easy opening with a glove add to its stature. The Socom's rugged reliability makes it the first choice of the special operations community.

Intended use: Tactical/Military

Production type: Midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade finish: Dual Tone - Tactical Black PVD & Satin
Handle: Anodized aluminum with textured non-slip inserts
Blade length: 100mm.
Blade thickness: 5mm.
Closed length: 133mm.
Total length: 230mm.
Closed thickness: 13mm.
Weight: 149g.
Lock: Sub Liner Lock
Clip: stainless steel, removable (tip down)
Packaging: cardboard box with Microtech USA logos
Notes: Tungsten carbide glass breaker integrated into the tang

The Socom Elite sets the highest standards for tactical/utility cutlery. Since the inception of the original Socom in 1996, it has pioneered the entire line of Microtech folding knives. Over the years, many improvements have been made that have made the Socom more adaptable to different environments. You know you are buying the best tool on the market, regardless of which unique blade you choose: the clip point or the tanto. An integrated glass breaker at the base of the handle and a large pivot that allows easy opening with a glove add to its stature. The Socom's rugged reliability makes it the first choice of the special operations community.

Intended Use: Tactical/Military

Type of manufacture: midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Stonewashed
Handle: Anodized aluminum with textured non-slip inserts
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: 133mm.
Total length: 230mm.
Thickness when closed:13mm.
Weight: 149g.
Closure: Sub Liner Lock
Clip: stainless steel, removable(tip down)
Packaging: cardboard box with Microtech USA logos
Notes: tungsten carbide frangible integrated in the tang

The Socom Elite sets the highest standards for tactical/utility cutlery. Since the original Socom's inception in 1996, it has pioneered the entire line of Microtech folding knives. Over the years, many improvements have been made that have made the Socom more adaptable to different environments. You know you are buying the best tool on the market, regardless of which unique blade you choose: the clip point or the tanto. An integrated glass breaker at the base of the handle and a large pivot that allows easy opening with a glove add to its stature. The Socom's rugged reliability makes it the first choice of the special operations community.

Intended Use: Tactical/Military

Type of manufacture: midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Stonewashed
Handle: Anodized aluminum with textured non-slip inserts
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: 133mm.
Total length: 230mm.
Thickness when closed:13mm.
Weight: 149g.
Closure: Sub Liner Lock
Clip: stainless steel, removable (tip down)
Packaging: cardboard box with Microtech USA logos
Notes: tungsten carbide frangible integrated into tang

The name Acha derives from the way it was constructed: the blade tang crosses the handle and is secured at the end with an original steel ring nut.

Elegant and refined, yet a sturdy fixed blade EDC knife, the Acha features an M390 steel blade with a satin finish, joined to the SOLID handle by a 3D CNC-milled titanium guard.

The SOLID handle is available in different variants and is designed to offer excellent ergonomics, fitting comfortably in the palm of the hand in any type of grip.

The steel ring cap at the end of the handle has been turned to allow the Acha to be disassembled, facilitating cleaning and maintenance. The package includes a steel key which, when inserted into the holes in the ring, acts as a lever to unscrew the cap.

Type of use: Light Utility / Allrounder

Type of production: Industrial
Country of manufacture: Maniago - Italy
Blade: full tang, M390 stainless steel at 60/61HRC
Blade finish: PVD Stonewashed
Handle: Burlap Micarta SOLID, carved and machined from solid stock, with three-dimensionally milled PVD titanium guard, numerically controlled
Blade length: 107mm.
Blade thickness: 4.8 mm.
Total length: 233 mm.
Weight: 177 g. 
Sheath: leather, belt-mounted, vertical carry
Packaging: cardboard box with Lion Steel logos
Notes: -

The name Acha derives from the way it is constructed: the blade tang crosses the handle and is secured at the end with an original steel ring nut.

Elegant and refined, yet a sturdy fixed blade EDC knife, the Acha features an M390 steel blade with a satin finish, joined to the SOLID handle by a 3D CNC-milled titanium guard.

The SOLID handle is available in different versions and is designed to offer excellent ergonomics, fitting comfortably in the palm of the hand in any type of grip.

The steel ring cap at the end of the handle has been turned to allow the Acha to be disassembled, facilitating cleaning and maintenance. The package includes a steel key which, when inserted into the holes in the ring, acts as a lever to unscrew the cap. 

Type of use: Light Utility / Allrounder

Type of production: Industrial
Country of manufacture: Maniago - Italy
Blade: full tang, M390 stainless steel at 60/61HRC
Blade finish: Satin
Handle: Burlap Micarta SOLID, carved and machined from solid material, with a three-dimensionally milled titanium guard, numerically controlled
Blade length: 107mm.
Blade thickness: 4.8 mm.
Total length: 233 mm.
Weight: 177 g. 
Sheath: leather, belt-mounted, vertical carry
Packaging: cardboard box with Lion Steel logos
Notes: -

The name Acha derives from the way it is constructed: the blade tang crosses the handle and is secured at the end with an original steel ring nut.

Elegant and refined, yet a sturdy fixed blade EDC knife, the Acha features an M390 steel blade with a satin finish, joined to the SOLID handle by a 3D CNC-milled titanium guard.

The SOLID handle is available in different versions and is designed to offer excellent ergonomics, fitting comfortably in the palm of the hand in any type of grip.

The steel ring cap at the end of the handle has been turned to allow the Acha to be disassembled, facilitating cleaning and maintenance. The package includes a steel key which, when inserted into the holes in the ring, acts as a lever to unscrew the cap. 

Type of use: Light Utility / Allrounder

Type of production: Industrial
Country of manufacture: Maniago - Italy
Blade: full tang, M390 stainless steel at 60/61HRC
Blade finish: Satin
Handle: Burlap Micarta SOLID, carved and machined from solid material, with a three-dimensionally milled titanium guard, numerically controlled
Blade length: 107mm.
Blade thickness: 4.8 mm.
Total length: 233 mm.
Weight: 177 g. 
Sheath: leather, belt-mounted, vertical carry
Packaging: cardboard box with Lion Steel logos
Notes: -

Cold Steel Recon Tanto – Absolute reliability, wherever you need it.
With over 30 years of evolution behind it, the Recon Tanto has become a benchmark among combat knives. Its American Tanto-style design with reinforced tip offers power, precision, and maximum resistance even in the most extreme situations.

Used by special forces and SWAT units, it is designed for those who demand the best without compromise. Sharp, sturdy, ready to use. Try it and you'll understand why it should always be part of your equipment.

Intended use: Tactical/Sports

Type of production: Industrial
Country of production: Taiwan
Blade: SK-5 carbon steel
Blade treatment: Black Tuff-Ex coating
Handle: Kray-Ex (Kraton)
Blade length: 175mm.
Blade thickness: 5mm.
Total length: 300mm.
Balance: on the guard
Weight: 238g.
Sheath: Secure-Ex in ABS
Packaging: cardboard box with Cold Steel logos

Cold Steel Recon Tanto – Absolute reliability, wherever you need it.
With over 30 years of evolution behind it, the Recon Tanto has become a benchmark among combat knives. Its American Tanto-style design with reinforced tip offers power, precision, and maximum resistance even in the most extreme situations.

Used by special forces and SWAT units, it is designed for those who demand the best without compromise. Sharp, sturdy, ready to use. Try it and you'll understand why it should always be part of your equipment.

Intended use: Tactical/Sports

Type of production: Industrial
Country of production: Taiwan
Blade: SK-5 carbon steel
Blade treatment: Black Tuff-Ex coating
Handle: Kray-Ex (Kraton)
Blade length: 175mm.
Blade thickness: 5mm.
Total length: 300mm.
Balance: on the guard
Weight: 238g.
Sheath: Secure-Ex in ABS
Packaging: cardboard box with Cold Steel logos

The KS model represents a fusion of experience and innovation. It takes its name from a specialization and training course of the Italian Army, essential for access to the Folgore paratrooper brigade. This course, personally tackled by its creator, proved to be a 10-week, intense and challenging adventure, both physically and mentally.

With great pride, the KS was the first model produced by the designer. Thinking back to those decisive moments, he asked himself what knife he would like to have by his side to face the difficulties of those weeks in the woods. The answer was clear: a compact, lightweight blade with a drop point profile designed to facilitate various types of work. The comfortable and versatile handle was designed to provide a secure grip even with the English technique. From this idea, the KS was born.

Intended Use: Tactical/All Round Utility

Production type: Industrial
Country of manufacture: Italy
Blade: full tang in Niolox 59/61HRC steel
Blade treatment: Black Top Shield
Handle: G10
Blade length: 80mm.
Blade thickness: 5mm.
Total length: 183mm.
Weight: 147g.
Sheath: kydex with belt loop attachment, removable
Packaging: cardboard box with Fox logos
Notes: design by GZ Tactical

Civivi's Maxwell model is a sturdy fixed-blade knife designed to deliver superior performance in any situation.

With a D2 steel blade and a hardness rating of 58-60 HRC, the Maxwell is ideal for those seeking a versatile and durable cutting tool. The blade's black stonewashed finish, with a spear point design, increases its wear resistance. The black G10 handle ensures a solid and comfortable grip, while the “T-Clip” carry clip, designed by renowned designer Bob Terzuola, allows for convenient and safe carrying.

Complete with a durable Kydex holster and black paracord lanyard, the Maxwell is perfect for those who need a sturdy, yet stylish and functional knife for any adventure or everyday need.

Intended Use: Sporting/Utility

Production Type: Industrial
Country of manufacture: China
Blade: full tang in D2 steel
Blade treatment: black stonewashed
Handle: in G10
Blade length: 120mm.
Blade thickness: 5mm.
Total length: 259mm.
Weight: 266g.
Sheath: made of thermoformed kydex, with “T-Clip” hooking system by Bob Terzuola
Packaging: cardboard box with Civivi logos
Notes: -

The Hellfire is the result of a collaboration between Ka-Bar and the Tactical Defense Institute (TDI), thanks to which several models have been produced. With a prestigious addition: the world-renowned knife maker/designer Rick Hinderer.

Compact, robust, excellently balanced. The robust plastic sheath facilitates safe carrying and removal. A knife that well represents the concept of form made function.

Intended use: Tactical/Military/Collection

Blade: 1095 56/58HRC carbon steel
Handle: Ultramid
Blade length: 89 mm
Blade thickness: 4.9 mm.
Total length: 183 mm.
Balance: central, at the index finger recess
Weight: 127g. (200g. scabbard included)
Sheath: ABS
Packaging: cardboard box with Ka-Bar logos

The Socom Elite sets the highest standards for tactical/utility cutlery. Since the inception of the original Socom in 1996, it has pioneered the entire line of Microtech folding knives. Over the years, many improvements have been made that have made the Socom more adaptable to different environments. You know you are buying the best tool on the market, regardless of which unique blade you choose: the clip point or the tanto. An integrated glass breaker at the base of the handle and a large pivot that allows easy opening with a glove add to its stature. The Socom's rugged reliability makes it the first choice of the special operations community.

Intended Use: Tactical/Military

Type of manufacture: midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Apocalyptic
Handle: Anodized aluminum with textured non-slip inserts
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: 133mm.
Total length: 230mm.
Thickness when closed:13mm.
Weight: 149g.
Closure: Sub Liner Lock
Clip: stainless steel, removable(tip down)
Packaging: cardboard box with Microtech USA logos
Notes: tungsten carbide frangible integrated in the tang

The Socom Elite sets the highest standards for tactical/utility cutlery. Since the inception of the original Socom in 1996, it has pioneered the entire line of Microtech folding knives. Over the years, many improvements have been made that have made the Socom more adaptable to different environments. You know you are buying the best tool on the market, regardless of which unique blade you choose: the clip point or the tanto. An integrated glass breaker at the base of the handle and a large pivot that allows easy opening with a glove add to its stature. The Socom's rugged reliability makes it the first choice of the special operations community.

Intended Use: Tactical/Military

Type of manufacture: midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Stonewashed
Handle: Anodized aluminum with textured non-slip inserts
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: 133mm.
Total length: 230mm.
Thickness when closed:13mm.
Weight: 149g.
Closure: Sub Liner Lock
Clip: stainless steel, removable(tip down)
Packaging: cardboard box with Microtech USA logos
Notes: tungsten carbide frangible integrated in the tang

Big, bigger, Midgards! If you're looking for a solid knife with a distinctive signature, you can't go wrong with Dirk Hofmeister of Midgards Messer. Even the Norse gods have recognized this and recently insisted on a folding version of the renowned Boker Plus Hermod. The designer from Lake Constance has fulfilled the demanding desires of Asgard, presenting a fully functional pocket knife that excels in even the most challenging cutting tasks. Powerful, fearless, and above all practical: the Hermod Folder impresses in every aspect.

Powerful, the blade on ball bearings in D2 with a stonewash finish. Epic, the ergonomic handle made from G10, CNC-milled with anti-slip diagonal mosaic texture, seamlessly connects to the tip-up clip. The nail for opening and the impressive linerlock for blade locking are legendary. An additional safety pin or forelock is screwed into the front of the handle to increase work and transport safety and prevent accidental closure or opening. The jimping on the spine of the blade, extending over the entire top of the handle including the overlays, ensures maximum user ergonomics.

The spacer that integrates a lanyard hole, also usable as a lifesaving glass breaker, offers additional transport options. Supplied with a high-quality nylon sheath and the spirit of the Nordic blacksmith.

Intended Use: Utility / Sporting

Production Type: Industrial
Country of Production: China
Blade: made of D2 steel
Blade Treatment: stonewash
Handle: G10
Blade Length: 92mm.
Blade Thickness: 4.8mm.
Weight: 240gr.
Total Length: 222mm.
Clip: stainless steel, removable
Locking Mechanism: liner lock with safety screw pin, usable in both open and closed positions
Packaging: cardboard box with Boker Plus logos, nylon pouch with zipper
Notes: Design by Dirk Hofmeister of Midgards Messer - ball-bearing opening system

The Boker Plus Mini Tracker, designed by Dave Wenger, impresses as an extremely stable outdoor knife with a massive 1095 carbon steel blade that boasts excellent corrosion resistance due to its abrasion-resistant powder coating.

The front-balanced blade of this solid survival knife has two different levels of sharpness and is ideal for chopping, cutting, scraping, digging and prying. The length of the blade and the ergonomic flake shape of the finely textured Micarta handle allow for effortless work.

This updated version features a full tang blade, supported by strong screws, for maximum stability. Includes a belt adapter and a perfectly fitted kydex sheath.

Intended Use: Utility

Production type: Industrial
Country of manufacture: Taiwan
Blade: ful tang made of 1095 steel
Blade finish: powder coating
Handle: micarta
Blade length: 135mm.
Blade thickness: 5mm.
Total length: 250mm.
Weight: 300g.
Sheath: Kydex
Packaging: cardboard box with Boker Plus logos
Notes: Design by Dave Wenger

Limited to 1999 pieces worldwide, the forged steel collector's knife was designed as a compact outdoor knife with integral construction and was largely inspired by classic hunting knives. The Boker Magnum Collection 2024 is the perfect balance of showcase and outdoor adventure.

Intended Use: Collection/Utility

Production Type: Industrial
Country of manufacture: China
Blade: forged, 440C steel
Blade Finish: Satin finish
Handle: in Quilted Maple wood
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 230mm.
Weight: 145g.
Sheath: leather
Packaging: gift box with warranty certificate and microfiber cleaning cloth
Notes: Numbered and limited edition made in only 1999 pieces - Design by Andreas Schweikert

FAT BOY is the strongest fixed-blade knife ever produced by Extrema Ratio. This is the first knife produced from N690Co steel (58HRC) with a thickness of as much as 8.6mm. The total weight of this model is 1kg.

The blade, which features a full flat rounding, has a special tip structure that not only combines the ability to penetrate with the possibility of use as a wedge, but at the same time allows the main cutting edge to be safeguarded. Its shape and width also enable it to dig small holes in the ground in emergency situations.

The back, which is thick and flat at the end, gives the tool more mass and beating surface useful for hammering and planting stakes. Fat Boy has a handle composed of 2 black-colored G10 material grips made with Extrema Ratio's new original design. Removable and replaceable, they allow for inspections and checks underneath the handle and allow for paracord mounting.

Intended Use: Heavy Duty

Production type: Industrial
Country of manufacture: Italy
Blade: full tang, made of Bohler N690Co stainless steel at 58HRC
Blade treatment: Dark Stonewashed
Handle: G10
Blade length: 210mm.
Blade thickness: 8.6mm.
Total length: 350mm.
Weight: 1008g.
Sheath: cordura, belt-mounted, MOLLE compatible
Packaging: cardboard box with Extrema Ratio logos.

FAT BOY is the strongest fixed blade knife Extrema Ratio has ever produced. It is the first knife made of N690Co steel (58HRC) with a thickness of 8.6 mm. The total weight of this model is 1 kg.

The blade, characterized by a completely flat edge, has a special tip structure that not only combines the ability to penetrate with the possibility of using it as a wedge, but also protects the main cutting edge. Thanks to its shape and width, it can also dig small holes in the ground in emergency situations.

The thick spine, flat at the end, gives the tool greater mass and a striking surface that is useful for driving stakes and hammers. Fat Boy has a handle made of 2 black G10 handle scales in the new original Extrema Ratio design. They are removable and interchangeable and allow inspections and checks under the handle as well as the attachment of paracord.

Intended use: Heavy Duty

Type of production: Industrial
Country of manufacture: Italy
Blade: Full tang, 58HRC Bohler N690Co stainless steel
Blade treatment: Dark stonewashed
Handle: G10
Length of the blade: 210mm.
Thickness of the blade: 8.6 mm.
Total length: 350 mm.
Weight: 1008g.
Sheath: Cordura, belt, MOLLE compatible
Packaging: Cardboard box with Extrema Ratio logos

The Socom Elite sets the highest standards for tactical/utility cutlery. Since the inception of the original Socom in 1996, it has pioneered the entire line of Microtech folding knives. Over the years, many improvements have been made that have made the Socom more adaptable to different environments. You know you are buying the best tool on the market, regardless of which unique blade you choose: the clip point or the tanto. An integrated glass breaker at the base of the handle and a large pivot that allows easy opening with a glove add to its stature. The Socom's rugged reliability makes it the first choice of the special operations community.

Intended Use: Tactical/Military

Type of manufacture: midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Apocalyptic
Handle: Anodized aluminum with textured non-slip inserts
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: 133mm.
Total length: 230mm.
Thickness when closed:13mm.
Weight: 149g.
Closure: Sub Liner Lock
Clip: stainless steel, removable(tip down)
Packaging: cardboard box with Microtech USA logos
Notes: tungsten carbide frangible integrated in the tang

The Socom Elite sets the highest standards for tactical/utility cutlery. Since the inception of the original Socom in 1996, it has pioneered the entire line of Microtech folding knives. Over the years, many improvements have been made that have made the Socom more adaptable to different environments. You know you are buying the best tool on the market, regardless of which unique blade you choose: the clip point or the tanto. An integrated glass breaker at the base of the handle and a large pivot that allows easy opening with a glove add to its stature. The Socom's rugged reliability makes it the first choice of the special operations community.

Intended Use: Tactical/Military

Type of manufacture: midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Black PVD
Handle: Anodized aluminum with textured non-slip inserts
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: 133mm.
Total length: 230mm.
Thickness when closed:13mm.
Weight: 149g.
Closure: Sub Liner Lock
Clip: stainless steel, removable (tip down)
Packaging: cardboard box with Microtech USA logos
Notes: tungsten carbide frangible integrated in the tang

The Maserin Gladio Alato was designed to equip the personnel of the 66th Trieste Airborne Infantry Regiment, the only airborne infantry unit in the entire Armed Force, with a dagger that reflects the spirit, symbolism and specific needs of the unit.

To develop the Winged Gladio, the Maniago-based company collaborated with the Centro Formazione Aeromobile (CFA), affiliated with the Trieste Regiment. The blade has a design reminiscent of the classic Gladio, while the handle, typical of military tactical daggers, features a texture that provides an excellent grip.

Given the tactical context in which the unit operates, the dagger has been equipped with additional features for emergencies: there is a slot glass breaker and two holes on the guard that allow the knife to be attached to a pole or other supports.

Intended Use: Tactical/Military

Type of production: Industrial
Country of manufacture: Italy
Blade: single edge, full tang in N690Co steel at 59HRC
Blade treatment: DLC
Handle: G10
Blade length: 180mm.
Blade thickness: 5mm.
Total length: 312mm.
Weight: 234g.
Sheath: made of kydex, belt-mounted, compatible with MOLLE attachments
Packaging: cardboard box with Maserin logos
Notes: Designed to equip the personnel of the 66th Airborne Infantry Regiment Trieste, the only airborne infantry unit in the entire Italian Armed Force.

The Socom Elite sets the highest standards for tactical/utility cutlery. Since the inception of the original Socom in 1996, it has pioneered the entire line of Microtech folding knives. Over the years, many improvements have been made that have made the Socom more adaptable to different environments. You know you are buying the best tool on the market, regardless of which unique blade you choose: the clip point or the tanto. An integrated glass breaker at the base of the handle and a large pivot that allows easy opening with a glove add to its stature. The Socom's rugged reliability makes it the first choice of the special operations community.

Intended Use: Tactical/Military

Type of manufacture: midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Apocalyptic
Handle: Anodized aluminum with textured non-slip inserts
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: 133mm.
Total length: 230mm.
Thickness when closed:13mm.
Weight: 149g.
Closure: Sub Liner Lock
Clip: stainless steel, removable(tip down)
Packaging: cardboard box with Microtech USA logos
Notes: tungsten carbide frangible integrated in the tang

Intended use: tactical / sports

Type of production: Industrial
Country of production: Taiwan
Blade: SK-5 carbon steel
Blade treatment: Black Tuff-Ex painting
Handle: Kray-Ex (Kraton)
Blade length: 155mm.
Blade thickness: 5mm.
Total length: 275mm.
Balancing: on the guard branch
Weight: 230g.
Sheath: Secure-Ex in ABS
Packaging: cardboard box with Cold Steel logos

The Fallkniven H1 knife is a very handy knife with impressive strength. The H1 is our first true hunting knife and encapsulates the history of Nordic Scandinavian cutlery art. Because of this heritage, the H1 does not have a standard finger guard, but grip security is improved by the ergonomic thermorun plastic handle.

The special design of the H1 blade is used to work game while hunting. The H1 knife may look different, but it works very well. In many ways, the performance of a knife depends on the person holding it. Knowing where and how to properly carve game goes beyond the knife. Hunters must avoid wrong cuts, keep hair off the meat, avoid cutting organs, and minimize blood flowing onto the game and the hunter. The combination of an experienced hunter and a well-designed knife is unbeatable!

Intended use: hunting

Type of production: Industrial
Country of manufacture: Sweden
Blade: Elmax SuperClean stainless steel at 61/62HRC
Blade finish: Satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 210mm.
Balance: backward
Weight: 175g.
Sheath: made of Zytel
Packaging: white cardboard case with Fallkniven logos
Notes: -

In this new edition of the Defender FX-689, we have focused our attention on the blade, introducing an extraordinary 5 mm thick N690Co blade, which gives it particularly high strength. The handle features deep transverse grooves for an extremely secure grip.

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: N690Co 58/60HRC stainless steel
Blade treatment: Black Top Shield
Handle: FRN (Fiberglass Reinforced Nylon) with Black Top Shield steel guard and pommel
Blade length: 170mm.
Blade thickness: 5mm.
Total length: 320mm.
Weight: 360g.
Sheath: made of Kydex, with M.O.L.L.E. compatible loops.
Packaging: cardboard box with Fox logos
Notes: -

The Fox FX-654 CR Billao fixed-blade knife represents a contemporary reinterpretation of an iconic historical creation, a tribute to the famous "Billato" model employed by Italian Africa Police (PAI) personnel between the 1930s and 1940s. Fox Knives has put considerable effort into designing and making the Billao knife, keeping the original appeal of the design intact while at the same time taking advantage of the latest discoveries in materials science and current manufacturing technologies to improve its strength, quality and durability.

Intended Use: Collection

Type of production: Industrial
Country of production: Italy
Blade: full tang in N690Co 58/60HRC stainless steel - single edge
Blade treatment: Satin finish
Handle: Buffalo horn
Blade length: 190mm.
Blade thickness: 5mm.
Total length: 310mm.
Weight: 355g.
Sheath: leather
Packaging: cardboard display case with knife presentation and historical notes
Notes: commemorative reproduction of the "Billato" model, used by personnel of the Police of Italian Africa (PAI) between the 1930s and 1940s.

The kiridashi is a traditional Japanese cutting tool that has ancient roots in culture and tradition; Extrema Ratio has revised according to its style this knife belonging to Japanese tradition giving it a more tactical look than the original. While retaining the characteristic chisel rounding, KIRI has a special tip designed to achieve a high penetration efficiency. 

Extrema Ratio KIRI is available in Dark Stone and Satin finishes, both made of Böhler N690 steel hardened to 58HRC. The handle consists of two black-colored anodized anticorodal aluminum grips. The preshaped Kydex sheath is equipped with metal eyelets that allow paracord lanyard to be attached to MOLLE system platforms as well.

Intended use: Neck knife / Utility

Type of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58/60HRC
Blade treatment: Dark Stone Washed
Handle: stainless steel N690Co 58/60HRC
Blade length: 60mm.
Blade thickness: 5mm.
Total length: 190mm.
Weight: 112g.
Sheath: in Kydex, for neck
Packaging: cardboard box with Extrema Ratio logos
Notes: possibility of using the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (may be purchased separately)

The kiridashi is a traditional Japanese cutting tool that has ancient roots in culture and tradition; Extrema Ratio has revised according to its style this knife belonging to Japanese tradition giving it a more tactical look than the original. While maintaining the characteristic chisel rounding, KIRI has a special tip designed to achieve a high penetration efficiency. 

Extrema Ratio KIRI is available in Dark Stone and Satin finishes, both made of Böhler N690 steel hardened to 58HRC. The handle consists of two black-colored anodized anticorodal aluminum grips. The preshaped Kydex sheath is equipped with metal eyelets that allow paracord lanyard to be attached to MOLLE system platforms as well.

Intended use: Neck knife / Utility

Type of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58/60HRC
Blade treatment: satin finish
Handle: stainless steel N690Co 58/60HRC
Blade length: 60mm.
Blade thickness: 5mm.
Total length: 190mm.
Weight: 112g.
Sheath: in Kydex, for neck
Packaging: cardboard box with Extrema Ratio logos
Notes: possibility of using the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (may be purchased separately)

We are proud to present a true gem in the world of knives: the exclusive Wander Tactical model, Mistral XL. This extraordinary edition is distinguished by its elegance and refinement, with a Raw Finish blade treatment that captures the essence of craftsmanship, coupled with a G10 desert handle, which not only offers a high-end aesthetic but also ensures a solid and comfortable grip.

This production is extremely limited and unique, made in only 4 separate pieces, making each one a collector's item with collector's value. The knife we present here is number 3 in this exclusive series, as confirmed by the certificate of authenticity.

Type of production: Handcrafted
Country of production: Italy
Blade: D2 steel at 59/61HRC
Blade Finish: Raw
Handle: G10 Desert
Blade length: 160mm.
Blade thickness: 5mm.
Total length: 310mm.
Balance: set back about 2cm. from the guard branch
Weight: 419g.
Sheath: made of Kydex, thermoformed, with MOLLE-compatible belt loop
Packaging: accompanied by polypropylene case 
Notes: limited series of four pieces different from each other, specimen #3 of #4

Intended Use: Tactical / Sporting

Production type: Industrial
Country of Production: USA
Blade: full tang in carbon steel CPM-3V
Blade treatment: Black Cerakote
Handle: G10 Black with stainless steel through-guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex, with Nylon belt attachment system, removable
Packaging: cardboard box with Zero Tolerance logos
Notes: limited edition Sprint Run edition (not numbered) designed for the international market only

As one of the four smiths, the dwarf Dvalin crafted the Brisingamen necklace for the Germanic goddess of love, Freya. In Norse mythology, this special jewel was attributed with magic, love, but also pain and suffering. Freya's tears in the sky always promised rich fruits on earth.

However, it was the wrath of the father of the gods, Odin, that often drove the goddess of love to instigate wars in the world of men. Dirk Hofmeister from Midgards Messer was inspired by the art of Nordic forging and created the folding blade version of the beloved Little Dvalin.

The powerful Dvalin Folder Tanto stands out for its compact size and features a Tanto blade in D2 steel with ball bearings, finished with a rough stonewash appearance and equipped with a deep groove on both sides for opening the folding knife using the recess as a nail lever.

The groove on the top of the blade provides a secure support for the thumb during complex cutting operations. Despite the wrath of the gods, the well-formed and partially grooved G10 handle always fits firmly in the hand. On the back of the handle is the stainless steel Frame Lock that securely locks the blade.

With a commercial 3D printer, it is possible to print alternative handles in a variety of shapes, colors, and materials. The Tip-Up (r) clip mirrors the texture of the handle, while the hole for the lanyard enhances ease of use. It comes with a high-quality nylon case for storage.

Intended use: Utility
Production type: Industrial
Country of production: China
Blade: full tang in D2 steel
Blade finish: stonewash
Handle: G10
Blade length: 71mm.
Blade thickness: 5.1mm.
Total length: 167mm.
Weight: 157g.
Clip: in steel
Packaging: cardboard box with Boker Plus logos
Notes: -

Machai - A fitting name for this large cutting tool. In Greek mythology, the Machai were the demons (spirits) of battle and combat.

The high weight and recurved profile of this flat ground blade make it an excellent hatchet. The Machai has a full-tang construction and a handle that ensures a forward balance in the user's hand.

The textured Micarta canvas ergonomic handle ensures a secure and comfortable grip, whether wet or dry. Made by the good people at KA-BAR Knives; in Olean, NY, USA.

Intended use: Tactical / Military

Type of production: Industrial
Country of production: USA
Blade: in 1095 carbon steel 56/58HRC
Blade finish: Black Powder Coating
Handle: CE Canvas Micarta
Blade length: 165mm.
Blade thickness: 4.8mm.
Total length: 295mm.
Weight: 308g.
Sheath: Thermoplastic, multi-position, with M.O.L.L.E compatible belt attachments and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by Iovito - The Professional Grade series with a Silver-colored box identifies American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with the production experience of Ka-Bar to keep public prices affordable without having to give up a made in USA production.

Intended use: Sporting / Hunting

Production type: Industrial
Country of Production: Italy
Blade: Full tang in NIOLOX stainless steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 113mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 243g.
Sheath: Thermoformed kydex, with Tek-Lok multi-position attachment
Packaging: Cardboard box with Fox Knives logos 
Notes: Design by Gudy Van Poppel - Fixed blade version of the successful folder launched in 2021

Intended use: Utility / Tactical / Outdoor

Type of production: Industrial
Country of production: Italy
Blade: Niolox 59/61HRC stainless steel with Black Idroglider finish
Handle: Bison Micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 230mm.
Balancing: advanced by 1cm
Weight: 235g.
Sheath: leather
Packaging: cardboard box with Fox logos
Note: -