Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
CRKT - M16-12LE knife Small Law Enforcement Tanto - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: small marks on tip
* Marks on handle: clip slightly marked
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryBlade: Teflon-coated AUS-8 high-carbon 57/58HRC stainless steel
Handle: Zytel grips
Blade length: 76 mm.
Blade thickness: 3 mm.
Total length: 185mm.
Weight: 97g.
Closure: Liner Lock
Clip: Stainless Steel
Notes: equipped with safety catchAP-CM16-12LE -
Boker Plus - Jim Wagner Reality-Based Tanto Blade - PRIVATE COLLECTION - 01BO051
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Commercially available: No since 2014
* Sharpening: Original
* Marks on blade: No
* Marks on handle: No
* Box: NOT present
* Checked and certified by our internal laboratory
Type of production: industrial
Blade: 440C 58HRC stainless steel
Blade treatment: Teflon
Handle: FNR
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: -mm.
Total length: 230mm.
Balancing: -
Weight: 168g.
Closure: Back Lock
Clip: stainless steel
Sheath: -
Notes: design by Jim VagnerBO-01BO051 -
ExtremaRatio - MF0T Zero Oxide Grey 33pcs. Limited Edition - PRIVATE COLLECTION - knife
Exclusive limited edition series in collaboration with INSTRUCTOR ZERO (Team Zero International Training Security Company), renowned firearms training specialist, risk analyst and strategic consultant working worldwide for both military and law enforcement specialized units and government agencies.
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from private collection, previously purchased.
* Condition: New, never used
* Commercially available: Discontinued, limited run of only 33 numbered pieces
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratoryIntended Use: Tactical / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Treatment: Testudo MIL-C-13924
Handle: Anticorodal
Blade Length: 68mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 181mm.
Thickness when closed: 23mm. (15mm without clip)
Weight: 139g.
Closure: Liner Lock with additional safety catch
Clip: Stainless Steel
Packaging: watertight plastic box with Extrema Ratio and Team Zero logos, Warranty Certificate, Velcro Patch, Limited edition made in only 33 piecesER-MF0TBZOG -
ExtremaRatio - Glauca B1 G.I.G.N. Knife - PRIVATE COLLECTION - knife
The GLAUCA B1 folding knife was born from the collaboration with the GIGN (special unit of the French National Gendarmerie). It has a tip designed to allow maximum penetration. On the back of the handle it features a stop strap cutting system.
It is equipped with a rear glass breaker, a clip that can be applied in three positions and a side safety device.
The rigid sheath is made of ABS applied to a Cordura base and allows you to store the knife with the blade open.
Allows multiple attachment options: MOLLE system for tactical vests, belt attachment and thigh attachment.
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Excellent condition
* Commercially available No
* Sharpness: Original
* Marks on blade: small scratches on the blade
* Marks on handle: NO
* Packaging: YES
* Sheath: YES
* Manuals, Certificates and Warranties: YES
* Checked and Certified by our internal laboratory
Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Blade finish: Burnished
Handle: Rough Anticorodal
Blade length: 115mm.
Blade thickness: 4mm.
Closed length: 158mm
Total length: 268mm.
Closed thickness: 15mm.
Weight: 197g.
Closure: Liner Lock with Additional Safety
Clip: Removable and multi-position, in stainless steel
Sheath: Cordura and Kydex with magnetic blade retention
Packaging: Cardboard box with Extrema Ratio logos
Notes: supplied with the G.I.G.N. (National Gendarmerie Intervention Group) French, specialized in operations against terrorism and emergency response in the event of hostagesAP-ER-GLA-B1 -
Boker Plus - Kwaiken American Tanto by Lucas Burnley - D2 & Black G10 - 01BO512 - knife
In the Kwaiken American Tanto, the Oregon knife designer combines elements of Japanese and American styles. The flipper opens the silk-smooth D2 Tanto blade and locks with the reliable linerlock. The Tanto blade features a straight back and a second curved cutting edge at the front that runs straight to the tip-ideal for precise cuts. The exclusive claim is emphasized by the lightweight G10 handle grips, which give the all-black knife a very distinctive and harmonious appearance.
The slim design and exclusive material make the Kwaiken a classy men's knife with a tactical touch. It comes with a high-quality nylon case for storage and a deep, removable carry tip-up clip.
Intended Use: Tactical/Sportsman
Production Type: Industrial
Country of manufacture: China
Blade: D2 steel
Blade treatment: black coating
Handle: stainless steel and G10
Blade length: 90mm.
Blade thickness: 3.1mm.
Total length: 212mm.
Weight: 120g.
Clip: removable, stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: design by Lucas Burnley - flipper opening system on ball bearingsBO-01BO512 -
Chris Reeve - Small Sebenza 31 Plain Tanto - MagnaCut & Titanium Natural Micarta Inlays - knife
The idea behind the Sebenza has never wavered: to create the best pocket knife in the world.
First-rate materials, fine finishes, and a security locking system, all in an incredibly lightweight and precision tool. This commitment continues with the new Sebenza 31 with ceramic ball interface.
Like the first Sebenza, it offers the same warm "click" and heirloom quality produced to aerospace tolerances. The Sebenza 31 adds finer details to an already fine knife, taking another steady and reliable step forward.
Intended Use: Collector/SportsmanType of manufacture: MidTech
Country of manufacture: USA
Blade: CPM MagnaCut steel at 63/64HRC
Blade finish: Stonewashed
Handle: Titanium 6AL4V microblasted with micarta inserts
Blade length: 76.2mm.
Blade thickness: 3mm.
Length closed: 101mm.
Total length: 177.3mm.
Weight: 85g.
Closure: Frame Lock
Clip: Titanium 6AL4V microblasted
Package: Cardboard box with Chris Reeve logos, Fluorinated grease, Threadlocker, Disassembly tool, Microfiber cloth, Manuals and Warranty Certificate
Notes: -CR-S31-1230 -
Viper - Katla by Vox - 3D Carbon Fiber - V5980FC3D - knife
Katla, designed by Jesper Voxnaes, is a liner lock folding knife, which revives the Tanto profile blade with a bevel that enhances the excellent cutting qualities of the Böhler M390, hardened at 59/61 HRC.
The rotation mechanism is given by thrust bearings, and can be opened with the double peg for the thumb, or with the very fast pinball machine.
The detail that characterizes the Katla is the 3D processing of the handle on both ends of the cheek which recalls, reworking them in a modern key, the insignia of the most classic Viper models.
The flat edges and the titanium clip allow a comfortable and discreet port.
Intended use: EDC / SportsType of production: Industrial
Country of production: Italy
Blade: M390 60 / 61HRC stainless steel
Blade finish: Satin
Handle: Carbon fiber with 3D processing
Blade length: 82mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 198mm.
Weight: 122g.
Closure: Liner Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes - opening via Carson Flipper system on ball bearingV5980FC3D -
Benchmade - Bailout Knife Crater Blue Aluminum - CPM-M4 - Plain Tanto - 537FE-02 - knife
When you find yourself facing long distances, you need a knife that can do the same. Inspired and designed for tactical situations, the Bailout® pushes the concept of lightweight to the maximum. It boasts an anodized aluminum handle with a diamond-texture and a CPM-M4 steel blade with a tanto profile, this slim pocket tool achieves an optimal balance between strength and weight, making it suitable for both heavy-duty use and daily carry. The novelty for 2023 is the eye-catching combination of the Crater Blue handle and the Flat Dark Earth blade, creating a striking contrast.
Intended Use: Tactical / EDC
Production Type: Industrial
Country of Production: USA
Blade: CPM-M4 steel (62-64 HRC)
Blade Finish: Cerakote®
Handle: Crater Blue anodized 6061-T6 aluminum
Blade Length: 86mm.
Blade Thickness: 2.3mm.
Closed Length: 119mm.
Overall Length: 205mm.
Closed Thickness: 10.4mm
Weight: 70g.
Locking Mechanism: AxisLock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -BM-537FE-02 -
Benchmade - Bailout Knife Black Aluminum - CPM-M4 - Serrated Tanto - 537SGY-03 - knife
When you find yourself facing challenging situations and need a knife that measures up, the Bailout® is what you need. Inspired and designed for tactical situations, this ultralight knife delivers maximum performance. It features an anodized aluminum handle with a diamond-texture and a CPM-M4 steel blade with a serrated tanto profile. This slim pocket tool offers a perfect balance between strength and weight, making it suitable for both heavy-duty and everyday use. New for 2023 is a discreet design version with a tungsten gray Cerakote blade and a black handle.
Intended Use: Tactical / EDC
Production Type: Industrial
Country of Production: USA
Blade: CPM-M4 steel (62-64 HRC)
Blade Finish: Cerakote®
Handle: Black anodized 6061-T6 aluminum
Blade Length: 86mm.
Blade Thickness: 2.3mm.
Closed Length: 119mm.
Overall Length: 205mm.
Closed Thickness: 10.4mm
Weight: 70g.
Locking Mechanism: AxisLock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -BM-537SGY-03 -
Benchmade - Bailout Knife Black Aluminum - CPM-M4 - Plain Tanto - 537GY-03 - knife
When you find yourself facing challenging situations and need a knife that measures up, the Bailout® is what you need. Inspired and designed for tactical situations, this ultralight knife delivers maximum performance. It features an anodized aluminum handle with a diamond-texture and a CPM-M4 steel blade with a tanto profile. This slim pocket tool offers a perfect balance between strength and weight, making it suitable for both heavy-duty and everyday use. New for 2023 is a discreet design version with a tungsten gray Cerakote blade and a black handle.
Intended Use: Tactical / EDC
Production Type: Industrial
Country of Production: USA
Blade: CPM-M4 steel (62-64 HRC)
Blade Finish: Cerakote®
Handle: Black anodized 6061-T6 aluminum
Blade Length: 86mm.
Blade Thickness: 2.3mm.
Closed Length: 119mm.
Overall Length: 205mm.
Closed Thickness: 10.4mm
Weight: 70g.
Locking Mechanism: AxisLock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -BM-537GY-03 -
CRKT - A.B.C. (All. Bases. Covered.) by Hammond - 12C27 & Black G10 - 2606 - knife
Jim Hammond's A.B.C. (All. Bases. Covered.) makes its return in an even more versatile form. It is now a folder, bringing the varied capabilities of the original fixed blade into a more convenient and compact design. With its assisted opening and IKBS pads, it's always ready for action at any time, while the G10 handle provides a strong grip even in adverse weather conditions.
Intended Use: Tactical
Production Type: Industrial
Country of Production: China
Blade: Sandvik 12C27 stainless steel
Blade treatment: Black Oxide
Handle: G10
Blade Length: 85.9mm.
Blade thickness: 3.1mm.
Length closed: 116mm.
Total length: 203mm.
Weight: 110g.
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Jim Hammond - Assisted opening via Carson Flipper system and IKBS ball bearing movementC2606 -
Benchmade - Bailout Knife - CPM-M4 - Tanto - Titanium Handle - Limited Edition - 537BK-2302 - knife
A perfect combination in the EDC paradise. The Bailout® holds a special place in the hearts of those who appreciate tactical toughness in their everyday carry, and now we're pairing this sleek and ultralight folding knife with the ultimate super-material: titanium.
The all-new limited edition 537BK-2302 Bailout® features the much-loved CPM-M4 tanto blade, now in cobalt black Cerakote, but the star of this show is its handle made of bead-blasted 6Al-4V titanium manufactured in the USA.
Accentuated with PVD-coated blue hardware, including a Crater Blue lanyard pommel, this edition is limited to 1000 pieces.
Intended Use: Tactical / EDC
Production Type: Industrial
Country of Origin: USA
Blade: CPM-M4 steel (62-64 HRC)
Blade Finish: Cobalt Black Cerakote
Handle: 6AI-4V Titanium
Blade Length: 86mm.
Blade Thickness: 2.3mm.
Closed Length: 119mm.
Overall Length: 205mm.
Closed Thickness: 9.7mm
Weight: 103g.
Locking Mechanism: AxisLock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Limited edition of 1000 piecesBM-537BK-2302 -
Boker Plus - Dvalin Folder Tanto Knife - D2 - G10 Black - 01BO549 - knife
As one of the four smiths, the dwarf Dvalin crafted the Brisingamen necklace for the Germanic goddess of love, Freya. In Norse mythology, this special jewel was attributed with magic, love, but also pain and suffering. Freya's tears in the sky always promised rich fruits on earth.
However, it was the wrath of the father of the gods, Odin, that often drove the goddess of love to instigate wars in the world of men. Dirk Hofmeister from Midgards Messer was inspired by the art of Nordic forging and created the folding blade version of the beloved Little Dvalin.
The powerful Dvalin Folder Tanto stands out for its compact size and features a Tanto blade in D2 steel with ball bearings, finished with a rough stonewash appearance and equipped with a deep groove on both sides for opening the folding knife using the recess as a nail lever.
The groove on the top of the blade provides a secure support for the thumb during complex cutting operations. Despite the wrath of the gods, the well-formed and partially grooved G10 handle always fits firmly in the hand. On the back of the handle is the stainless steel Frame Lock that securely locks the blade.
With a commercial 3D printer, it is possible to print alternative handles in a variety of shapes, colors, and materials. The Tip-Up (r) clip mirrors the texture of the handle, while the hole for the lanyard enhances ease of use. It comes with a high-quality nylon case for storage.
Intended use: Utility
Production type: Industrial
Country of production: China
Blade: full tang in D2 steel
Blade finish: stonewash
Handle: G10
Blade length: 71mm.
Blade thickness: 5.1mm.
Total length: 167mm.
Weight: 157g.
Clip: in steel
Packaging: cardboard box with Boker Plus logos
Notes: -BO-01BO549 -
Spartan Blades - Ronin Shoto Folder Karambit - CTS-XHP - SFBL9BK - knife
The Spartan-Ronin Shōtō is a folding karambit knife with a liner lock. This blade is the result of a collaborative effort between Spartan Blades and TU Lam of Ronin Tactics, our former Special Forces colleague and dear friend.
Having worked throughout Asia and in Indonesia, both Tu Lam and Spartan hold a great respect for the Karambit style. This blade was designed to be incorporated into various martial arts systems.
It features a blade made of CTS-XHP, "Emerson Wave" function for easy opening, and a reversible pocket clip for left-hand carry; the black and red G10 grips ensure a secure grip. Please check this link to Ronin Tactics HERE.
All our Bronze (Field) grade folding knives incorporate our new "Oil Infused Bronze Bearing System" or “OIBBS”. Our sintered bronze bearings are oil-impregnated, thereby reducing friction on the blade, offering you a tight but smooth blade opening.
Intended use: Collection / Sports
Type of production: Industrial
Country of production: Taiwan
Blade: in stainless steel CTS-XHP
Blade treatment: Satin Black Ti/Nitride Finish
Handle: G10
Blade length: 75mm.
Blade thickness: 3.2mm.
Closed length: 135mm
Total length: 200mm.
Weight: 179g.
Lock: Liner Lock
Clip: in steel
Packaging: cardboard box with Spartan Blades logos
Notes: The Field Grade series with Bronze-colored box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series one can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.SFBL9BK -
Cold Steel - AD-10 Lite - Tanto Point Knife by Andrew Demko - FL-AD10T - folding knife
The AD-10 Lite is the cheaper version of the AD-10 folder with which it shares most of the features, style and high-performance potential such as our unique Tri-Ad Lock, blade configurations and steel thickness. However, we chose to use less expensive materials in manufacturing: for example, instead of G-10 handles we used GFN and for the blade steel we chose to use an AUS 10A instead of CPM-S35VN while still remaining razor sharp and ready for action!
Intended Use: Sport/Utility
Production Type: Industrial
Country of manufacture: Taiwan
Blade: Stainless steel AUS-10A
Blade finish: Satin finish
Handle: GFN
Blade length: 89mm.
Blade thickness: 3.8mm.
Total length: 222mm.
Weight: 186g.
Locking system: Tri-Ad Lock
Clip: Reversible and removable, stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Notes: Design by Andrew DemkoCSFL-AD10T -
Pohl Force - Bravo Two Classic - FDE Dark Stonewashed ATS-34 - 1079 - knife
To celebrate Pohl Force's 15th anniversary, the popular Bravo One and Two Gen. 1 folding knife models are being reissued with a few minor updates.
From the very beginning, their compact size and shape made them ideal companions for everyday use. And that has not changed to this day. Like the Alpha Two X, on the occasion of the company's 10th anniversary, with the original handle design from the first generation. The new Classic Edition also features other details, such as the locking mechanism, the pocket clip that can be mounted on either the right or left side, and the two-handed blade opening.
It is not only the Pohl Force that is celebrating an anniversary, but also the designer and company founder Dietmar Pohl. In the early 1990s, now 30 years ago, he created his first knife designs on paper, thus opening a new chapter in his life. The Japanese steel manufacturer Hitachi's ATS-34, which is the counterpart to the American 154CM steel, was one of the most popular steels of the time. For almost a decade, ATS-34 steel remained the first choice of custom knife manufacturers, before powder metallurgy steel took off in the 2000s. To mark the company's anniversary, Dietmar Pohl was able to obtain 'his' steel again in a very limited quantity and use it for the Classic Edition of the Bravo One / Two. The highly corrosion-resistant ATS-34 impresses with its exceptional sharpness and high edge retention.
The Bravo Two Classic BK is equipped with an FDE (Flat Dark Earth) fibreglass handle and a Tanto blade with a Dark Stonewashed finish.
Intended use: Tactical, collection
Type of production: Industrial
Blade: Hitachi ATS-34 stainless steel
Blade finish: Dark Stonewashed
Handle: GRP (glass-reinforced polyester)
Blade length: 83mm.
Blade thickness: 3.5mm.
Total length: 195mm.
Thickness when closed: 14mm.
Weight: 120g.
Closure: Back Lock
Packaging: Cardboard box with Pohl Force logos
Notes: Numbered and with certificate of authenticity with signature and date of manufacturePF-1079FDE -
Fox - Core Tanto knife by Vox - FX-612RB - Top Shield black - Red - knife
The Core Tanto series is designed with knives in mind that can be relied on in any environment, thanks to a solid, sturdy blade equipped with a strong point to penetrate and a sharp main bevel.
The Core Tanto is the perfect tool for days outdoors.Intended Use: Sporting/Tactical
Production Type: Industrial
Country of manufacture: Italy
Blade: N690 59/60HRC stainless steel
Blade finish: Top Shield® black
Handle: FRN
Blade length: 97mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 190mm.
Thickness when closed: 18mm.
Weight: 135g.
Closure: Liner Lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Flipper-type opening on ball bearings - Design by Jesper VoxnaesFX-612RB -
Fox - Core Tanto knife by Vox - FX-612ODB - Top Shield black - Green - knife
The Core Tanto series is designed with knives in mind that can be relied on in any environment, thanks to a solid, sturdy blade equipped with a strong point to penetrate and a sharp main bevel.
The Core Tanto is the perfect tool for days outdoors.Intended Use: Sporting/Tactical
Production Type: Industrial
Country of manufacture: Italy
Blade: N690 59/60HRC stainless steel
Blade finish: Top Shield® black
Handle: FRN
Blade length: 97mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 190mm.
Thickness when closed: 18mm.
Weight: 135g.
Closure: Liner Lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Flipper-type opening on ball bearings - Design by Jesper VoxnaesFX-612ODB -
Fox - Core Tanto knife by Vox - FX-612BLB - Top Shield black - Blue - knife
The Core Tanto series is designed with knives in mind that can be relied on in any environment, thanks to a solid, sturdy blade equipped with a strong point to penetrate and a sharp main bevel.
The Core Tanto is the perfect tool for days outdoors.Intended Use: Sporting/Tactical
Production Type: Industrial
Country of manufacture: Italy
Blade: N690 59/60HRC stainless steel
Blade finish: Top Shield® black
Handle: FRN
Blade length: 97mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 190mm.
Thickness when closed: 18mm.
Weight: 135g.
Closure: Liner Lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Flipper-type opening on ball bearings - Design by Jesper VoxnaesTranslated with www.DeepL.com/Translator (free version)
FX-612BLB -
Fox - Core Tanto by Vox - FX-612ODS - Acid Stonewashed OD Green - knife
Intended Use: Sporting / Tactical
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690 59/60HRC
Blade finish: Acid Stonewashed
Handle: FRN
Blade Length: 97mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 190mm.
Thickness when closed: 18mm.
Weight: 135g.
Closure: Liner Lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Flipper-type opening on ball bearings - Design by Jesper Voxnaes - Acid etching on the blade restores an already "worn" aesthetic appearance and each individual knife may have different finishes/colors/shades than the product in the pictures.FX-612ODS -
Fox - Core Tanto by Vox - FX-612BLS - Acid Stonewashed Blue - knife
Intended Use: Sporting / Tactical
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690 59/60HRC
Blade finish: Acid Stonewashed
Handle: FRN
Blade Length: 97mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 190mm.
Thickness when closed: 18mm.
Weight: 135g.
Closure: Liner Lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Flipper-type opening on ball bearings - Design by Jesper Voxnaes - Acid etching on the blade restores an already "worn" aesthetic appearance and each individual knife may have different finishes/colors/shades than the product in the pictures.FX-612BLS -
Fox - Phi Black PVD - Bali Knife by Vincenzo Fiore - FX-570TIB - Knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390
Blade finish: Black PVD
Handle: Titanium
Blade length: 115mm. (wire length 95mm.)
Blade thickness: 4mm.
Total length: 255mm.
Weight: 138g.
Locking system: not present
Clip: not present
Packaging: Cardboard box with Fox logos - Leather pouch
Notes: Design by Vincenzo Fiore, designer specializing in balisongs - Each piece is numbered, but this is not a limited edition.FX-570TIB -
Fox - Phi - Bali Knife by Vincenzo Fiore - FX-570TI - Knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390
Blade finish: Satin
Handle: Titanium
Blade length: 115mm. (edge length 95mm.)
Blade thickness: 4mm.
Total length: 255mm.
Weight: 138g.
Locking system: not present
Clip: not present
Packaging: Cardboard box with Fox logos - Leather pouch
Notes: Design by Vincenzo Fiore, designer specialised in balisong - Each piece is numbered, but this is not a limited edition.FX-570TI -
Fox - Moa - Folding Karambit by Jared Wihongi - FX-653 - Knife - Made in Italy
Intended Use: Tactical / Military
Type of production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: Stone Washed Black Idroglider
Handle: G10
Blade length: 70mm.
Blade thickness: 4mm.
Total length: 190mm.
Weight: 120g.
Locking system: Liner Lock, with additional safety.
Clip: removable and reversible, painted stainless steel
Packaging: Cardboard box with Fox-Wihongi logos
Notes: Design by Jared Wihongi (Special Forces CQC Instructor and SWAT Operator)FX-653 -
Fox - Moa - Fixed Karambit by Jared Wihongi - FX-651 - Knife - Made in Italy
Intended Use: Tactical / Military
Production type: Industrial
Country of Production: Italy
Blade: full tang in stainless steel N690Co
Blade finish: Stone Washed Black Idroglider
Handle: G10
Blade length: 70mm.
Blade thickness: 4mm.
Total length: 180mm.
Weight: 130g.
Sheath: kydex, with Tek-Lok-like attachment
Packaging: Cardboard box with Fox-Wihongi logos
Notes: Design by Jared Wihongi (Special Forces CQC Instructor and SWAT Operator)FX-651 -
ExtremaRatio - Waki Black Machete Knife - Tactical Knife
The product is an elaboration of the Japanese Wakizashi sword, a typical blade 30 to 60 centimeters long, which the Samurai carried at all times in contact with the body, where the Katana was carried exclusively in battle. The blade produced from Boehler N690 steel is hardened to 58HRC while the handle is made of forprene, an elastomer that falls under the "NATO standard" for resistance to extreme conditions. The Waki Black comes with a cordura, military-derived scabbard that ensures safe carrying of the razor-sharp blade and its protection from shocks that could reduce its efficiency. The scabbard is also equipped with the MOLLE system that allows it to be carried on tactical vests and general belts.
Intended Use: Tactical/MacheteType of production: Industrial
Country of manufacture: Italy
Blade: stainless steel N690Co at 58HRC
Blade Treatment: Burnishing MIL-C-13924
Handle: Forprene
Blade Length: 297mm.
Blade thickness: 6.5mm. tapering to 4mm from the handle.
Total length: 456mm.
Weight: 384g.
Sheath: cordura, compatible with M.O.L.L.E. systems.
Packaging: cardboard box with Extrema Ratio logos
Notes: -ER-WA-BK -
Cold Steel - Air Lite Tanto - CS26WT - Black G10 - folding knife
We know that many of our customers are increasingly concerned about the weight and bulk of their EDC (every day carry) knife as space in their pockets is always very limited. That's why we focused on making a feather-light (90g.) and ultra-thin (8.8 mm thick) knife that can be carried 24/7 while still leaving pocket space for other essential accessories.
What we did not do, however, in our attempt to create a super EDC knife was to skimp on workmanship and materials. That's why all the blades in the Air Lite series feature impeccable workmanship and Japanese AUS-10A stainless steel, famous for its ability to hold an edge; the handles, on the other hand, are laser-cut from genuine G-10.
Even the locking mechanism is unbeatable-there's nothing better than our celebrated Tri-Ad Lock when it comes to finger protection. With an affordable price, amazing sharpness, and tremendous comfort and convenience in use, the Air Lite is truly unbeatable!
Intended Use: Sporty / EDCProduction type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-10A
Blade treatment: Satin finish
Handle: G10
Blade length: 89mm.
Blade thickness: 3mm.
Total length: 203mm.
Weight: 90g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: -CS26WT -
Maserin - Diceros by Davide Bomben - G10 Black - 925/G10N - knife
Intended Use: Utility / Hiking
Production type: Industrial
Country of Production: Italy
Blade: Full tang, tool steel D2
Blade Finish: Stonewashed
Handle: G-10
Blade length: 140mm.
Blade thickness: 6mm.
Total length: 290mm.
Balance: slightly advanced
Weight: 412g.
Sheath: nylon, with thigh and belt attachments
Package: Cardboard box with Maserin logos - diamond sharpener - wire saw for wood
Note: Design by Davide Bomben, president of the Associazione Italiana Esperti d'Africa (Italian Association of African Experts) and chief instructor of the Poaching Prevention Academy, an organization that in Namibia and other African countries trains rangers against poachers. He is the director of training for the African Field Guides Association and for over ten years has worked with the tour operator Il Diamante and with Wilderness Safaris as a guide and ranger. He has published guides to Namibia, South Africa and Botswana and three books on African mammals and birds. He is the promoter and referent of numerous projects for the protection of African wildlife such as rhinos, lions, elephants and gorillas.MA-925/G10N -
Maserin - Diceros by Davide Bomben - G10 Orange - 925/G10A - knife
Intended Use: Utility / Hiking
Production type: Industrial
Country of Production: Italy
Blade: Full tang, tool steel D2
Blade Finish: Stonewashed
Handle: G-10
Blade length: 140mm.
Blade thickness: 6mm.
Total length: 290mm.
Balance: slightly advanced
Weight: 412g.
Sheath: nylon, with thigh and belt attachments
Package: Cardboard box with Maserin logos - diamond sharpener - wire saw for wood
Note: Design by Davide Bomben, president of the Associazione Italiana Esperti d'Africa (Italian Association of African Experts) and chief instructor of the Poaching Prevention Academy, an organization that in Namibia and other African countries trains rangers against poachers. He is the director of training for the African Field Guides Association and for over ten years has worked with the tour operator Il Diamante and with Wilderness Safaris as a guide and ranger. He has published guides to Namibia, South Africa and Botswana and three books on African mammals and birds. He is the promoter and referent of numerous projects for the protection of African wildlife such as rhinos, lions, elephants and gorillas.MA-925/G10A -
Cold Steel - SR1 Tanto Point knife - S35VN - 62LA OD Green G10 - folding knife
The Cold Steel SRK (Survival Rescue Knife) has been a Cold Steel pride for over 25 years. Favorite knife for many military operators, still supplied to Navy SEALs today during BUDS training.
It is therefore not surprising that Cold Steel, when commissioned in-house designer Andrew Demko to develop a high-end tactical folding knife for military applications, was inspired by the legendary SRK!
The SR1's sturdy heavy-duty blade is made from US 5mm premium CPM-S35VN sintered steel
A good blade needs a good grip, so this model of the SR1 is made from G10.
For added reliability and safety, Cold Steel has equipped the SR1 with the famous Tri-Ad locking mechanism - proven time and again to be perfect for heavy-duty use.
Intended use: Sports / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S35VN stainless steel
Blade treatment: Stone Wash
Handle: OD Green G10
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note:CS62LA -
Cold Steel - SR1 Lite Tanto Point knife - 62K1A - folding knife
Intended use: Sports / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: 8Cr13MoV stainless steel
Blade treatment: Stone Wash
Handle: Griv-Ex ™
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note:CS62K1A -
CRKT - Carson M16-13DSFG Tan Special Forces - PRIVATE COLLECTION - pocket knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A couple of small marks on Tan-colored finish, unnoticeable
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting/TacticalProduction Type: Industrial
Country of Production: China
Blade: Stainless steel AUS-8
Blade Finish: Tan Oxide
Handle: PVD steel folders with G10 Tan grips
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 140mm.
Total length: 240mm.
Weight: 150g.
Opening: Carson Flipper system
Closure: Liner Lock with auto LAWKS security system
Clip: multi-position, removable, Black Oxide stainless steel
Packaging: cardboard box with CRKT logos
Notes: Design by Kit Carson - Carson Flipper opening systemM16-13DSFG-CP -
ExtremaRatio - BF2CT Knife Stone Washed - Classic Tanto - knife
Il BF2 è un chiudibile “full size” particolarmente indicato per l’impiego professionale da parte di operatori militari e di polizia sul campo. L’impugnatura è salda e confortevole; la clip, reversibile ed avvolgente, diventa un utile e comodo appoggio per il pollice in “reverse grip”. La guancetta è piena con i caratteristici piani ribassati per impegnare i “pin” d’apertura senza che sporgano dal profilo del coltello chiuso. La lama, disponibile in versione drop o tanto, ha l’arrotatura piatta e, come nel BF1, la punta particolarmente spessa e resistente. Il meccanismo di blocco della lama è il collaudato LINER-LOCK, coadiuvato da un meccanismo di sicura da azionare manualmente protetto da un carter.
Destinazione d'uso: Tattico/Militare
Tipo di produzione: industriale
Lama: in acciaio inox N690Co 58HRC
Paese di produzione: Italia
Impugnatura: Anticorodal
Lunghezza lama: 90mm.
Spessore lama: 3mm.
Lunghezza chiuso: 124mm.
Lunghezza totale: 210mm.
Bilanciatura: -
Peso: 142g.
Chiusura: Liner Lock
Clip: reversibile ed amovibile in acciaio inox
Fodero: -
Note: Fermo di sicurezza a coltello apertoER-BF2CT-SW -
Boker Plus - Little Rok Knife - 02BO026 - by James Helm - knife
Intended use: Utility
Type of production: Industrial
Country of production: China
Blade: SK-5 steel ful tang
Blade finish: Black PVD
Handle: Micarta
Blade length: 104mm.
Blade thickness: 5mm.
Total length: 220mm.
Weight: 200g.
Sheath: in Kydex with Tek-Lok type attachment
Packaging: cardboard box with Boker Plus logos
Notes: design by James HelmBO-02BO026 -
Boker Plus - Little Dvalin Tanto Point Knife - 02BO034 - coltello
Destinazione d'uso: Utility
Tipo di produzione: Industriale
Paese di produzione: Cina
Lama: ful tang in acciaio D2
Finitura lama: Black PVD
Manicatura: G10
Lunghezza lama: 80mm.
Spessore lama: 5.7mm.
Lunghezza totale: 166mm.
Peso: 157g.
Fodero: in Kydex, con aggancio multiposizione
Confezione: scatola di cartone con loghi Boker Plus
Note: -BO-02BO034 -
Cold Steel - Mini Recon 1 Tanto Point - 27BAT - knife
Intended Use: Sporting/EDC
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-10A
Blade treatment: Stonewashed
Handle: Zytel
Blade length: 76mm.
Blade thickness: 3mm.
Length closed: 102mm.
Total length: 178mm.
Weight: 99g.
Closure: Tri-Ad Lock
Clip: Stainless steel, removable and reversible
Package: Cardboard box with Cold Steel logos
Notes: -CS27BAT -
Boker Plus - Yokai Knife Tanto Black D2 in G10 - 01BO151 - folding knife
Intended use: EDC / Sports
Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: black
Handle: G10
Blade length: 95mm.
Blade thickness: 3.7mm.
Total length: 230mm.
Weight: 147g.
Clip: removable
Closure: LinerLock
Packaging: nylon case with zip - cardboard box with Boker Plus logos
Notes: opening with Carson Flipper system on ball bearings - design by Alessandra De SantisBO-01BO151 -
Cold Steel - Mini Leatherneck - Tanto Point - 39LSAA - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13MoV
Blade finish: Satin finish
Handle: Kray-Ex™ with stainless steel guard
Blade length: 89mm.
Blade thickness: 3mm.
Total length: 171mm.
Weight: 93.5g.
Scabbard: Secure-Ex® in thermoplastic material
Packaging: Cardboard box with Cold Steel logos
Note: the package does not include the sheath's docking system or attachment system.CS-39LSAA -
MKM - Edge - SlipJoint by Graciut - Titanium Bronze - MKEG-TBR - knife
Intended Use: Sporty / Gentleman / EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade Treatment: Satin
Handle: Titanium
Blade length: 76mm.
Blade thickness: 2.5mm.
Length closed: 102mm.
Total lenght: 174mm.
Thickness when closed: 12mm.
Weight: 72g.
Opening: two hands
Washers: Brass
Closure: Slip Joint
Clip: -
Scabbard: leather, with belt loop with magnetic release
Package: Cardboard box with logos MKM Maniago Knife Makers
Notes: Design by Bruno Bruna Graciut, Master CIC (Italian Knife Makers Guild)MK-EG-TBR -
MKM - Edge - SlipJoint by Graciut - Aluminium Green - MKEG-AGR - knife
Intended Use: Sporty / Gentleman / EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: Satin
Handle: Aluminium
Blade length: 76mm.
Blade thickness: 2.5mm.
Length closed: 102mm.
Total lenght: 174mm.
Thickness when closed: 12mm.
Weight: 53g.
Opening: two hands
Washers: Brass
Closure: Slip Joint
Clip: -
Scabbard: leather, with belt loop with magnetic release
Package: Cardboard box with logos MKM Maniago Knife Makers
Notes: Design by Bruno Bruna Graciut, Master CIC (Italian Knife Makers Guild)MK-EG-AGR -
MKM - Edge - SlipJoint by Graciut - Aluminium Black - MKEG-ABK - knife
Intended Use: Sporty / Gentleman / EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: Satin
Handle: Aluminium
Blade length: 76mm.
Blade thickness: 2.5mm.
Length closed: 102mm.
Total lenght: 174mm.
Thickness when closed: 12mm.
Weight: 53g.
Opening: two hands
Washers: Brass
Closure: Slip Joint
Clip: -
Scabbard: leather, with belt loop with magnetic release
Package: Cardboard box with logos MKM Maniago Knife Makers
Notes: Design by Bruno Bruna Graciut, Master CIC (Italian Knife Makers Guild)MK-EG-ABK -
Cold Steel - Oyabun Tanto Flipper Folder - 26T - knife
Intended Use: Sporting/EDC
Production type: Industrial
Country of Production: China
Blade: Stainless steel 4034SS
Blade Treatment: Satin finish
Handle: Griv-Ex with non-slip Kray-Ex
Blade length: 89mm.
Blade thickness: 3.8mm.
Length closed: 120mm.
Total length: 209mm.
Weight: 116g.
Closure: Liner Lock with additional safety catch on right handle
Clip: Stainless steel, removable
Packaging: Cardboard box with Cold Steel logos
Notes: -CS26T -
Cold Steel - Master Tanto 6" CPM-3V - 13PBN - knife
Intended use: collection / sporting
Production type: Industrial
Country of Production: Taiwan
Blade: Carbon steel CPM-3V
Blade treatment: satin finish
Handle: Kray-Ex (Kraton) with stainless steel guard and pommel
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 292mm.
Balance: on the guard branch
Weight: 269g.
Sheath: Secure-Ex ABS with nylon belt loop.
Packaging: cardboard box with Cold Steel logos
Notes: new version 2021 of the popular Master Tanto 6" produced by Cold Steel since the early 80'sCS13PBN -
Cold Steel - Kyoto I Mini Japanese Tanto - 17DA - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13MoV
Blade finish: Satin finish
Handle: Kray-Ex™
Blade length: 82mm.
Blade thickness: 3mm.
Total length: 168mm.
Weight: 93.5g.
Scabbard: Secure-Ex® thermoplastic material
Packaging: Cardboard box with Cold Steel logos
Note: the package does not include the sheath's docking system or attachment system.CS17DA -
Cold Steel - Micro Recon 1 Tanto Point - 27DT - Knife
Intended Use: Sporting / EDC
Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 4034SS
Blade Treatment: Stonewashed
Handle: Griv-Ex
Blade length: 47mm.
Blade thickness: 2.4mm.
Length closed: 67mm.
Total length: 110mm.
Weight: 30g.
Closure: Tri-Ad Lock
Clip: -
Package: Cardboard box with Cold Steel logos
Notes: supplied with key ringCS27DT -
Cold Steel - Tanto Machete 32cm - 97BTMS - knife
Intended use: Machete
Type of production: industrial
Blade: carbon steel 1050
Country of Production: South Africa
Handle: PVC
Blade length: 320mm.
Blade thickness: 2mm.
Total length: 470mm.
Balance: advanced, 8cm. from the handle
Weight: 450g.
Sheath: Nylon and ABS
Notes: -CS97BTMS -
ExtremaRatio - T4000 C Satin - knife
Intended Use: Sporting / Backup
Production type: Industrial
Country of Production: Italy
Blade: Bohler N690Co stainless steel at 58HRC
Blade Finish: Satin finish
Handle: Forprene
Blade length: 104mm.
Blade thickness: 4mm.
Total length: 208mm.
Weight: 196g.
Sheath: Nylon
Packaging: Cardboard box with Extrema Ratio logos.ER-T4C-SA -
Fox - Ryu by Black Rock Knives - G10 - FX-634MOD - knife
Intended Use: Tactical
Production type: Industrial
Country of Production: Italy
Blade: Full tang, Niolox stainless steel at 59/61HRC
Blade treatment: Black Stonewashed
Handle: G-10
Blade length: 135mm.
Blade thickness: 5mm.
Total lenght: 270mm.
Weight: 225g.
Scabbard: Kydex, with Tek-Lok type fitting
Package: Cardboard box with Fox logos
Notes: Design by Black Rock KnivesFX-634 -
Fox - Ryu by Black Rock Knives - Micarta - FX-634MOD - knife
Intended Use: Tactical / Sporting
Production type: Industrial
Country of Production: Italy
Blade: Full tang, stainless steel Niolox at 59/61HRC
Blade Treatment: Stonewashed
Handle: Micarta
Blade length: 135mm.
Blade thickness: 5mm.
Total lenght: 270mm.
Weight: 225g.
Scabbard: Kydex, with Tek-Lok type fitting
Package: Cardboard box with Fox logos
Notes: Design by Black Rock KnivesFX-634MOD -
ExtremaRatio - Bayonet O.D. Green Civile NFG Fulcrum knife - Testudo - knife
After the success of the FULCRUM multirole knife, the civil bayonet version NFG (No Fixing Gears, without rifle attachment) was born. Like the FULCRUM, the bayonet is an extremely robust and versatile knife, the blade withstands breaking loads exceeding 150 kg, the tip is very robust and the profile allows you to work for a long time with the knife without affecting the sharpness of the last section . The advanced center of gravity and the weight of the blade make it suitable for heavy field work.
Intended use: tactical / military / multirole
Blade: N690Co 58HRC stainless steel
Handle: removable, in Forprene
Blade length: 180mm.
Blade thickness: 6.3mm.
Closed Length: -
Total length: 310mm.
Balance: advanced, 1.5 cm from the lower guard branch
Weight: 330g.
Closing: -
Clip: -
Sheath: modular tactical, from thigh or belt, in Nylon and Kydex, with blade attachment system for cutting with wire cutters
Notes: diamond sharpener integrated in the sheath - civil version, without rifle couplingsER-FBN-GR -
ExtremaRatio - Herring NE - Fairbairn Sykes Dagger - tactical knife
The Herring dagger is one of the most loved military knives by enthusiasts.
Its original name is Fairbairn Sykes or Commando Dagger and it was present in the endowment of the British Commandos.
A dagger that entered Italian history in World War II, thanks to the exploits of young soldiers of the 1st "Folgore" Reconnaissance Squadron, who were equipped with this weapon during Operation Herring. He has behind him a heroic piece of history that is rarely talked about, despite the fact that these young boys, thanks to their devotion to the cause and their courage, have written an important page in Italian history.
Extrema Ratio wanted to pay homage to this dagger trying to remain faithful to the original forms, while using the most modern production techniques.
The very special hand-made finish of the handle simulates the aging of brass and gives the dagger a dated look, similar to the original.
The dagger was developed in collaboration with the 185th RAO and adopted as a ceremonial commemorative dagger for the 20th anniversary of the regiment's establishment and the 75th anniversary of the Herring mission.
The knife is equipped with a polymer case with historical frieze of the F Squadron, leather / kydex sheath with brass tip and two commemorative scrolls.
PLEASE NOTE:
NE version, simulacrum replica with rounded tip and blunt blade, to allow free sale and possession according to the current regulations in force on the Italian territory.We warn that any subsequent modifications and sharpening made to the blade modify the status of simulacrum of the Herring NE. In this case it will be subject to the regulations in force in the respective countries. Furthermore, these changes will void the Extrema Ratio warranty.
Intended use: Collection / Tactical
Type of production: Industrial
Country of production: Italy
Blade: not sharp, in stainless steel N690Co 58HRC
Blade treatment: Burnishing MIL-C-13924
Handle: Aged brass
Blade length: 167mm.
Blade thickness: 6.3mm.
Total length: 289mm.
Weight: 276g.
Sheath: leather, ABS and brass sheath
Packaging: Polymer case with historical frieze of Squadron F and 2 commemorative scrolls
Note: -ER-HER-NE -
Viper - Katla by Vox - 3D Satin Titanium - V5982TI3D - knife
Katla, designed by Jesper Voxnaes, is a liner lock folding knife, which revives the Tanto profile blade with a bevel that enhances the excellent cutting qualities of the Böhler M390, hardened at 59/61 HRC.
The rotation mechanism is given by thrust bearings, and can be opened with the double peg for the thumb, or with the very fast pinball machine.
The detail that characterizes the Katla is the 3D processing of the handle on both ends of the cheek which recalls, reworking them in a modern key, the insignia of the most classic Viper models.
The flat edges and the titanium clip allow a comfortable and discreet port.
Intended use: EDC / SportsType of production: Industrial
Country of production: Italy
Blade: M390 60 / 61HRC stainless steel
Blade finish: Stonewashed
Handle: Satinized titanium 3D processing
Blade length: 82mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 198mm.
Weight: 137g.
Closure: Liner Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes - opening via Carson Flipper system on ball bearingV5982TI3D -
Viper - Katla by Vox - 3D Marbled Carbon Fiber - V5980FCM3D - knife
Katla, designed by Jesper Voxnaes, is a liner lock folding knife, which revives the Tanto profile blade with a bevel that enhances the excellent cutting qualities of the Böhler M390, hardened at 59/61 HRC.
The rotation mechanism is given by thrust bearings, and can be opened with the double peg for the thumb, or with the very fast pinball machine.
The detail that characterizes the Katla is the 3D processing of the handle on both ends of the cheek which recalls, reworking them in a modern key, the insignia of the most classic Viper models.
The flat edges and the titanium clip allow a comfortable and discreet port.
Intended use: EDC / SportsType of production: Industrial
Country of production: Italy
Blade: M390 60 / 61HRC stainless steel
Blade finish: Satin
Handle: Carbon fiber with 3D processing
Blade length: 82mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 198mm.
Weight: 105g.
Closure: Liner Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes - opening via Carson Flipper system on ball bearingV5980FCM3D -
Gerber - Key Note Flipper - Black & Tan - 30-001692 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 7Cr17Mov stainless steel
Blade treatment: Teflon coating
Handle: Aluminum
Blade length: 25.4mm.
Blade thickness: 3.8mm.
Length closed: 50.8mm.
Total length: 76.2mm.
Weight: 66g.
Closing: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Gerber logos
Notes: Opening via Carson Flipper systemG30-001692 -
Gerber - Key Note Flipper - Satin & Black - 30-001691 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 7Cr17Mov stainless steel
Blade treatment: Satin finish
Handle: Aluminum
Blade length: 25.4mm.
Blade thickness: 3.8mm.
Length closed: 50.8mm.
Total length: 76.2mm.
Weight: 66g.
Closing: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Gerber logos
Notes: Opening via Carson Flipper systemG30-001691 -
ExtremaRatio - Giant Mamba - HCS - tactical knife
The Giant Mamba has a "tanto" blade in 6.3 mm thick Böhler N690 steel with a hardness of 58 HRC, flat edge and full length lightening.
The Forprene handle with locking by threaded tang makes the knife solid and well balanced. The MOLLE compatible sheath is made of shockproof nylon with a conical opening for rapid insertion and extraction and a system that avoids shaking noises, it is equipped with a two-button safety flap, a thigh with anti-rotation rubber reinforcement and a reversible ambidextrous safety : simply pressing the trigger unlocks the blade.
Intended use: Tactical / MultiroleType of production: Industrial
Country of production: Italy
Blade: in N690Co 58HRC stainless steel
Blade treatment: Satin
Handle: Forprene
Blade length: 163mm.
Blade thickness: 6.3mm.
Total length: 293mm.
Weight: 289g.
Sheath: Nylon
Packaging: Cardboard box with Extrema Ratio logos
Note: -ER-GMA-HC -
ExtremaRatio - Giant Mamba - Black - tactical knife
The Giant Mamba has a "tanto" blade in 6.3 mm thick Böhler N690 steel with a hardness of 58 HRC, flat edge and full length lightening.
The Forprene handle with locking by threaded tang makes the knife solid and well balanced. The MOLLE compatible sheath is made of shockproof nylon with a conical opening for rapid insertion and extraction and a system that avoids shaking noises, it is equipped with a two-button safety flap, a thigh with anti-rotation rubber reinforcement and a reversible ambidextrous safety : simply pressing the trigger unlocks the blade.
Intended use: Tactical / MultiroleType of production: Industrial
Country of production: Italy
Blade: in N690Co 58HRC stainless steel
Blade treatment: Mil-C-13924 burnishing
Handle: Forprene
Blade length: 163mm.
Blade thickness: 6.3mm.
Total length: 293mm.
Weight: 289g.
Sheath: Nylon
Packaging: Cardboard box with Extrema Ratio logos
Note: -ER-GMA-BK -
Benchmade - Bailout Knife - CPM-M4 - Plain Tanto - 537GY-1 - knife
Intended use: Tactical / EDC
Type of production: Industrial
Country of production: USA
Blade: CPM-M4 steel (62-64 HRC)
Blade finish: Gray Coated
Handle: Woodland Green anodized 6061-T6 aluminum
Blade length: 86mm.
Blade thickness: 2.3mm.
Length closed: 119mm.
Total length: 205mm.
Thick when closed: 10.4mm
Weight: 70g.
Closing system: AxisLock
Clip: Removable and reversible, in stainless steel
Packaging: Cardboard box with Benchmade logos
Note: --
BM-537GY-1 -
Maserin - Artiglio Flipper Knife - OD Green G10 - 420/G10V - Knife
Intended use: Tactical / Sports
Type of production: Industrial
Country of production: Italy
Blade: in D2 steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 100mm.
Blade thickness: 3.2mm.
Closed length: 130mm.
Total length: 223mm.
Thick when closed: 16.4mm.
Weight: 154g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Maserin logos
Notes: Design by Giacomo Toncelli420/G10V -
Maserin - Artiglio Flipper Knife - Grey G10 - 420/G10G - Knife
Intended use: Tactical / Sports
Type of production: Industrial
Country of production: Italy
Blade: in D2 steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 100mm.
Blade thickness: 3.2mm.
Closed length: 130mm.
Total length: 223mm.
Thick when closed: 16.4mm.
Weight: 154g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Maserin logos
Notes: Design by Giacomo Toncelli420/G10G -
ExtremaRatio - Fulcrum Bayonet NFG Black - Knife
After the success of the FULCRUM multi-role knife, the bayonet version was born. Like the FULCRUM, the bayonet is an extremely robust and versatile knife, the blade holds loads at break above 150 kg, the tip is very sturdy and the profile allows it to work for a long time with the knife without affecting the sharpening of the last section , which guarantees, together with the partial dorsal sharpening, to maintain the penetration capacity necessary for hand-to-hand combat against targets covered by heavy clothing, clothing and soft ballistic protections. The advanced center of gravity and the weight of the blade make it suitable for heavy field work. NFG version (No Fixing Gears, without rifle mount).
Intended use: tactical / military / multi-role
Blade: full tang in stainless steel N690Co 58HRC
Handle: removable in Forprene
Blade length: 180mm.
Blade thickness: 6.3mm.
Total length: 310mm.
Balancing: advanced, 1.5 cm from the lower guard branch
Weight: 378g.
Sheath: modular tactile with thread trimmer, thigh or belt, in Nylon and KydexER-FBN-BK -
Benchmade - Bailout - CPM-3V Plain Tanto - 537GY - knife
Intended use: Tactical / EDC
Type of production: Industrial
Country of production: USA
Blade: CPM-3V steel
Blade finish: Gray Coated
Handle: Grivory with
Blade length: 86mm.
Blade thickness: 2.3mm.
Length closed: 119mm.
Total length: 205mm.
Thick when closed: 10.4mm
Weight: 58.4g.
Locking system: AxisLock
Clip: Removable and reversible, in stainless steel
Packaging: Cardboard box with Benchmade logos
Note: -BM-537GY -
Maserin - Artiglio Flipper - Black G10 - 420/G10N - knife
Intended use: Tactical / Sports
Type of production: Industrial
Country of production: Italy
Blade: in D2 steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 100mm.
Blade thickness: 3.2mm.
Closed length: 130mm.
Total length: 223mm.
Thick when closed: 16.4mm.
Weight: 154g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Maserin logos
Notes: Design by Giacomo ToncelliMA-420/G10N -
Fox - Mini-TA - Black Nylon - Sandblasted - FX-536 - karambit knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Sandblasted
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with Fox logos and embroidered fabric key ringFX-536 -
Fox - Mini-TA - Coyote Brown Nylon - Sandblasted - FX-536CB - karambit knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Sandblasted
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with Fox logos and embroidered fabric key ringFX-536CB -
Fox - Mini-TA - Pink Nylon - Sandblasted - FX-536P - karambit knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Sandblasted
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with Fox logos and embroidered fabric key ringFX-536P -
ExtremaRatio - SERE 2 - GOI Gruppo Operativo Incursori - rescue knife
S.E.R.E. 2, adopted by the Operational Group of Italian Navy Incursors, is the development of the S.E.R.E. 1, created by a study group composed of Special Forces operators, martial artists and experts in survival techniques. This variant 2 has been revised according to the needs expressed by the Department.
The acronym S.E.R.E. refers to the four principles "Survival, Evasion, Resistance and Escape" which make up the training program provided to military personnel at high risk of capture.
The S.E.R.E. 2 is suitable for both tip and cut use. The unique grip, unlike the classic blades of this type, is fixed between the index and the middle, thus forming a single axis from the tip of the blade to the user's wrist, allowing its use also in reverse grip. The handle has the same ergonomics as the butt of a firearm; this grip allows an instinctive and immediate use, being able to easily integrate the training in the training activity.
The geometry of the tip ensures maximum penetration, at the same time its axial profile with a triangular base protects its resistance. The design of the blade has on one side a partially serrated profile to favor the cutting of cordages, and on the other hand a classic cut or straps that, unlike the previous model, has re-sharpening and interchangeable blades.
The central loop, which has the dual function of lightening and turn-crickets, recalls the maritime origins of its creators. The peculiarity of the knife is that it has been specifically designed to be used even without the handle; the two holes in the part dedicated to the handle facilitate assembly.
The kydex sheath has a basic retention that can be used alone for operators who need extremely fast knife use, and a removable locking lock if necessary. The knife is supplied with double safety for ambidextrous mounting. An insert with a flat-blade screwdriver is available as an accessory. Comes with belt clip for belt fastening and paracord for fixing on the M.O.L.L.E. system.
"Using the gun, knife or other weapon for us is the same thing: it's just the extension of the hand." Quote from a commander of the ward.
Intended use: Tactical / Military / RescueType of production: Industrial
Lama production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Burnishing MIL-C-13924
Handle: Forprene
Blade length: 148mm.
Blade thickness: 6.3mm.
Total length: 217mm.
Thickness when closed: -
Weight: 306g.
Sheath: In Kydex, with Tek-Lok hooking system
Packaging: Cardboard box with Extrema Ratio logos
Note: -ER-SERE2 -
ExtremaRatio - Fulcrum Bayonet knife NFG Desert SW - knife
Model: Lightened version of the classic Fulcrum Bayonet, with shearder, stone washed blade, desert handle and desert nylon sheath.
Intended use: tactical / military / multi-role
Blade: full tang in stainless steel N690Co 58HRC
Handle: dismountable in Forprene
Blade length: 180mm.
Blade thickness: 6.3mm.
Length closed: -
Total length: 310mm.
Balancing: advanced, 1.5 cm from the lower guard branch
Weight: 378g.
Closure: -
Clip: -
Sheath: modular tactical with shear, thigh or belt, in Nylon and Kydex
Note: -ER-FBN-DE -
Cold Steel - Voyager Tanto XL Plain - 29AXT - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Taiwan
Blade: stainless steel AUS-10A
Blade treatment: Stonewashed
Manicure: Long Grive-Ex (EMS Grivory)
Blade length: 140mm.
Blade thickness: 4mm.
Length closed: 171mm.
Total length: 235mm.
Thick when closed: 16.5mm.
Weight: 218g.
Closure: Tri-Ad Lock
Clip: removable and reversible, in stainless steel
Packaging: cardboard box with Cold Steel logos
Note: -CS29AXT -
Fox - MK Fixed Karambit Tool by Doug Marcaida - FX-801MK - multitool rescue
Intended use: Rescue / Emergency
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co
Blade treatment: Black Idroglider
Handle: in N690Co stainless steel
Blade thickness: 4mm.
Total length: 155mm.
Weight: 90g.
Clip: Removable and reversible, in stainless steel
Sheath: In kydex with Tek-Lok type attachment
Packaging: cardboard box with Fox FKMD logos
Notes: Made by Doug Marcaida and Lad MandiolaFX-801MK -
Cold Steel - Large Voyager Tanto Plain - 29AT - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Taiwan
Blade: stainless steel AUS-10A
Blade treatment: Stonewashed
Manicure: Long Grive-Ex (EMS Grivory)
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 138mm.
Total length: 235mm.
Thick when closed: 16.5mm.
Weight: 133g.
Closure: Tri-Ad Lock
Clip: removable and reversible, in stainless steel
Packaging: cardboard box with Cold Steel logos
Note: -CS29AT -
Cold Steel - Recon Tanto Knife - 49LRTZ - knife
Intended use: tactical / sports
Type of production: Industrial
Country of production: Taiwan
Blade: SK-5 carbon steel
Blade treatment: Black Tuff-Ex painting
Handle: Kray-Ex (Kraton)
Blade length: 175mm.
Blade thickness: 5mm.
Total length: 300mm.
Balancing: on the guard branch
Weight: 238g.
Sheath: Secure-Ex in ABS
Packaging: cardboard box with Cold Steel logosCS49LRTZ