bing
News
Best news of March
Shop By
Shopping Options
Brand
  1. Cold Steel 5items
  2. CRKT 1item
  3. Opinel 1item
  4. Spyderco 21items
  5. Approved 2items
  6. Fantoni 1item
  7. Microtech 1item
  8. MKM 1item
Less
Stock
  1. In Stock 9items
  2. Out of Stock 24items
Rating
  1. 5
    2items
  2. 4
    & up
    8items
Set Ascending Direction

33 Items

  1. Spyderco - Paramilitary Knife - G10 Black - Serrated - C81GS - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION

    Type: Previously Purchased and Used
    Conditions: In excellent conditions
    Available in the market: Out of production since 2010
    Sharpening: Factory
    Marks on blade: NO
    Marks on handle: NO
    Box: Present
    Sheath: -
    Manuals, Certificates, and Warranties: No
    Checked and Certified by our internal laboratory
    Intended use: Sport / Collection

    Type of production: Industrial
    Blade Production: USA
    Blade: In CPM-S30V stainless steel
    Blade finish: Satin
    Handle: G10
    Blade Length: 87mm.
    Blade Thickness: 3.5mm.
    Closed Length: 122mm.
    Total Length: 210mm.
    Weight: 110g.
    Closure: Compression Lock
    Clip: Painted stainless steel
    Packaging: Cardboard box with Spyderco logos
    Notes:

    AP-C81GS
    €184.43
    Only 1 left
    Only 1 left
  2. Spyderco - Salt I - H1FRN Yellow Knife - C88SYL - knife

    A myth in the knife world is that out there somewhere there is a steel with high cutting capabilities that cannot rust.

    A Japanese foundry recently turned this myth into reality with the introduction of a steel called H1. H1 is a PH steel, which is a precipitation-processed, hard-rolled alloy with no heat treatment and 0.1 percent nitrogen that acts like carbon in the steel matrix but does not react with chlorine to create rust.

    Surprisingly, it maintains a sharp edge comparable to that of the higher quality knife steels used in the industry by most knife manufacturers.


    Intended use: sub/sporting

    Type of production: industrial
    Country of manufacture: Japan
    Blade: nitrogen steel H1
    Blade finish: satin-finished
    Handle: FRN
    Blade length: 75mm.
    Blade thickness: 3mm.
    Length closed: 100mm.
    Total length: 175mm.
    Thickness when closed: 15mm.
    Weight: 54g.
    Closure: Back Lock
    Clip: removable, stainless steel
    Packaging: cardboard box with Spyderco logos
    Notes: -

    SC88SYL
    €130.33
    Only 1 left
    Only 1 left
  3. Spyderco - Endura 4 Serrated Knife - K390 Blue FRN - C10FPK390 - knife

    Intended Use: Sporting

    Type of production: industrial
    Blade: Bohler K390 carbon steel at 64/65HRC - SERRATED
    Blade treatment: satin finish
    Country of manufacture: Japan
    Handle: FRN with embedded stainless steel liners
    Blade length: 96mm.
    Blade thickness: 3mm.
    Length closed: 127mm.
    Total length: 222mm.
    Weight: 105g.
    Closure: Back Lock
    Clip: removable, multi-position, stainless steel
    Packaging: cardboard case with Spyderco logos
    Notes: variant in FRN Blue made from Bohler K390 carbon steel

    C10FSK390
    €180.33
    Only 1 left
    Only 1 left
  4. Cold Steel - Tiger Claw Karambit knife - Serrated Edge - 22KFS - knife

    Intended use: Sports / Tactical

    Type of production: Industrial
    Production Lama: Taiwan
    Blade: CTS-XHP 60 / 61HRC stainless steel
    Blade treatment: Satin finish
    Handle: G10
    Blade length: 88mm.
    Blade thickness: 3mm.
    Closed length: 157mm.
    Total length: 230mm.
    Thick when closed: 10mm.
    Balancing: -
    Weight: 145g.
    Closure: Tri-Ad Lock
    Clip: removable and reversible, in stainless steel
    Packaging: cardboard box with Cold Steel logos
    Notes: Design by Andrew Demko

     

    CS22KFS
    €155.74
    Only 1 left
    Only 1 left
    Rating:
    100%
    5
  5. MKM - Isonzo Hawkbill knife black by Vox - MK-FX03-1PBK - knife

    Small and compact, but with an impetuous personality, with its shots, with its curves and counter-curves, Isonzo is inspired by the magnificent river that breaks into the gates of the eastern Alps - Knife made by Fox

    Intended use: Sports / Tactical
    Type of production: Industrial
    Country of production: Italy
    Blade: stainless steel N690 59 / 60HRC
    Blade treatment: Black
    Handle: FRN
    Blade length: 55mm.
    Blade thickness: 3mm.
    Length closed: 85m.
    Total length: 141mm.
    Thick when closed: 18mm
    Weight: 60g.
    Closure: Liner Lock
    Opening system: Carson Flipper system with ball bearing rotation mechanism
    Spacer: in anodised aluminum
    Clip: in steel
    Sheath: -
    Packaging: Cardboard box with MKM logos Maniago Knife Makers
    Notes: Design by Jesper Voxnaes

    MK-FX03-1PBK
    €86.07
    Only 1 left
    Only 1 left
    Rating:
    93%
    4.7
  6. Opinel - Folding Saw No.12 - knife

    The monster stainless-bladed no.12 Opinel locking saw is large, perfect for cutting branches and foliage of up to 8/9cm in diameter. With its blade designed with razor-sharp teeth like knives, cutting is clean, even and effortless. The blade locks using the Virobloc safety ring, which in addition to locking the blade in the open position for safety of use, now enables locking of the blade in the closed position for safety during carrying.

    Blade Material: Carbon steel blade with anti-corrosion coating
    Blade Length (cm): 12.0
    Blade Length (cm): 12.0
    Blade Thickness (cm): 0.2
    Overall Length (cm): 24.0
    Cutting Edge (cm): 12.0
    Handle Material: Beech
    Lock Type: Ring Lock

    op-12seg
    €22.13
    Only 2 left
    Only 2 left
  7. Cold Steel - Counter Point XL - Serrated Edge - 10AAS - Knife

    Intended Use: Sporting/Tactical

    Production type: Industrial
    Country of Production: Taiwan
    Blade: Stainless steel AUS-10A
    Blade finish: Satin finish
    Handle: Griv-Ex™
    Blade length: 152mm.
    Blade thickness: 4mm.
    Length closed: 180mm.
    Total length: 335mm.
    Weight: 224g.
    Closure: Tri-Ad Lock
    Clip: removable and reversible, stainless steel
    Packaging: cardboard box with Cold Steel logos
    Notes: -

    CS10AAS
    €135.25
    Only 2 left
    Only 2 left
  8. Spyderco - Delica 4 SpyderEdge - C11SBK - knife

    Intended use: Sporting

    Type of manufacture: industrial
    Blade: Stainless steel VG-10 58HRC
    Blade treatment: -
    Blade production: Japan
    Handle: Black FRN with embedded stainless steel liners
    Blade length: 75mm.
    Blade thickness: 2.5mm.
    Length closed: 107mm.
    Total length: 180mm.
    Balance: -
    Weight: 72g.
    Closure: Back Lock
    Clip: Removable, multi-position, stainless steel
    Sheath: -
    Notes: -

    C11SBK
    €111.48
    Only 1 left
    Only 1 left
  9. Spyderco - Endura 4 Black FRN SpyderEdge - C10SBK - knife

    Intended use: Sporting

    Type of manufacture: industrial
    Blade: VG-10 stainless steel
    Blade treatment: -
    Blade production: Japan
    Handle: Black FRN with embedded stainless steel liners
    Blade length: 95mm.
    Blade thickness: 3mm.
    Length closed: 125mm.
    Total length: 220mm.
    Balance: -
    Weight: 104g.
    Closure: Back Lock
    Clip: Removable, multi-position, stainless steel
    Sheath: -
    Notes: -

    C10SBK
    €122.13
    Only 1 left
    Only 1 left
    Rating:
    87%
    4.4
  10. Spyderco - Dragonfly - Serrated Edge Stainless Steel - PRIVATE COLLECTION - C28P - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Type: Previously Purchased
    * Condition: Like new
    * Commercially Available Available
    * Sharpening: Factory
    * Marks on blade: No
    * Marks on handle: No
    * Box: Absent
    * Scabbard: -
    * Manuals, Certificates and Warranties: Absent
    * Checked and Certified by our in-house laboratory


    Intended Use: EDC/Sportsman

    Production Type: Industrial
    Country of Production: Japan
    Blade: stainless steel VG-10
    Blade finish: satin finish
    Handle: stainless steel
    Blade length: 58mm.
    Blade thickness: 2mm.
    Length closed: 80mm.
    Total length: 140mm.
    Weight: 74g.
    Closure: Back Lock
    Clip: stainless steel, removable
    Packaging: cardboard box with Spyderco logos
    Notes: Previously purchased knife from private collection, like new but without packaging

    SC28P-CP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  11. Spyderco - Endura 4 Stainless Steel SpyderEdge - C10S - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION

    Type: Previously Purchased
    Condition: in good condition
    Available in the market: YES
    Sharpening: Original
    Marks on blade: NO
    Marks on handle: YES, small scratches
    Packaging: YES, Spyderco box but with incorrect product code
    Checked and Certified by our internal laboratory
    Intended use: Sports

    Type of production: industrial
    Blade: in VG-10 stainless steel
    Blade treatment: -
    Blade production: Japan
    Handle: Stainless Steel
    Blade length: 95mm.
    Blade thickness: 3mm.
    Closed length: 125mm.
    Total length: 220mm.
    Balance: -
    Weight: 161g.
    Closure: Back Lock
    Clip: removable, multi-position, in stainless steel
    Sheath: -
    Notes: -

    AP-C10S
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  12. Cold Steel - Thompson Voyager - Signature Limited Edition - 29UXV - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION

    SERIAL NUMBER 0231

    * Type: Previously Purchased
    * Condition: Overall in good condition
    * Commercially available Limited series, discontinued
    * Sharpening: Factory
    * Marks on blade: Slight, uneven treatment in places (factory, not due to wear)
    * Marks on handle: No
    * Box: Present and original, WITH AUTOGRAPH SIGNATURE OF LYNN THOMPSON
    * Scabbard: Not present
    * Manuals, Certificates and Warranties: no
    * Checked and certified by our in-house laboratory

    Intended use: Sporting/EDC

    Production type: Industrial
    Country of manufacture: Taiwan
    Blade: Stainless steel Carpenter CTS XHP Alloy 59/60HRC
    Blade treatment: DLC
    Handle: Griv-Ex
    Blade length: 135mm.
    Blade thickness: 3.6mm.
    Length closed: 170mm.
    Total length: 304mm.
    Weight: 208g.
    Closure: Back Lock
    Clip: Stainless steel, removable
    Packaging: Cardboard box with Cold Steel logos
    Notes: Numbered and limited edition (serial no. 0231) with signature of "Lynn C. Thompson" laser engraved on the blade and in pen on the packaging

    CS29UXV
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  13. Spyderco - Dragonfly - 2008 Integral FRN Clip - C28S - PRIVATE COLLECTION - knife

    KNIFE WITHDRAWN FROM PRIVATE COLLECTION
    * Type: Previously Purchased
    * Condition: Overall in very good condition.
    * Commercially available Discontinued since 2010.
    * Sharpening: Factory.
    * Marks on blade: slight marks near the handle, due to blade opening.
    * Marks on handle: No.
    * Box: Present and original
    * Scabbard: not provided
    * Manuals, Certificates and Warranties: no.
    * Checked and Certified by our in-house laboratory




    Intended Use: Sporting

    Type of production: industrial
    Blade: stainless steel VG-10 58HRC
    Blade finish: satin finish
    Country of manufacture: Japan
    Handle: FRN (fiberglass reinforced nylon)
    Blade length: 57mm.
    Blade thickness: 2.5mm.
    Length closed: 84mm.
    Total length: 141mm.
    Weight: 34g.
    Closure: Back Lock
    Clip: made of FRN, integrated into the handle
    Notes: Third series made by Spyderco for the Dragonfly model, version remained in production only from 2008 to 2010 - specimen withdrawn from private collection, overall in very good condition

    AP-C28S
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  14. Spyderco - Co-Pilot C09S knife - GIN-1 steel - PRIVATE COLLECTION - knife

    Knife withdrawn from private collection - Rare model and out of production for many years, dating back to 1995 with blade made of Japanese GIN-1 steel - Overall in excellent condition. Complete with original box - Checked and certified by our in-house Coltelleria Collini laboratory.

    Intended use: Sports / Collection

    Type of production: Industrial
    Production Lama: Japan
    Blade: Gin-1 stainless steel
    Blade treatment: -
    Handle: steel
    Blade length: 50mm.
    Blade thickness: 2.5mm.
    Closed length: 77mm.
    Total length: 126mm.
    Thick when closed: 6mm
    Balancing: -
    Weight: 71g.
    Closure: Back Lock
    Clip: in stainless steel
    Sheath: -
    Packaging: cardboard box
    Note:

    SP-C09S-AP
    €0.00
    Only -50 left
    Only -50 left
    Out of stock
  15. Spyderco - Dragonfly 2 - Black Serrated - C28SBK2 - knife

    Intended use: Sports

    Type of production: Industrial
    Country of production: Japan
    Blade: VG-10 stainless steel
    Blade treatment: Satin finish
    Handle: FRN - Fiberglass Reinforced Nylon
    Blade length: 57mm.
    Blade thickness: 2.5mm.
    Length closed: 84mm.
    Total length: 141mm.
    Weight: 34g.
    Closing: Back Lock
    Clip: stainless steel, removable and reversible
    Packaging: Cardboard box with Spyderco logos
    Note: -

    C28SBK2
    €77.87
    Out of stock
  16. CRKT - Bear Claw Rescue Fixed Blade Knife 2510 - emergency knife

    Intended use: tactical / emergency belt cutter

    Type of production: Industrial
    Country of production: Taiwan
    Blade: in stainless steel AUS4
    Blade treatment: -
    Handle: Glass Reinforced Nylon
    Blade length: 60mm.
    Blade thickness: 3mm.
    Length closed: -
    Total length: 146mm.
    Weight: 96g.
    Closing: -
    Sheath: Glass-Reinforced Nylon
    Packaging: Cardboard box with CRKT logos
    Note: -

    C2510
    €45.08
    Only -99 left
    Only -99 left
    Out of stock
  17. Cold Steel - Talwar 5.5 "- Serrated - 21TTXLS - knife

    Intended use: Sports / Tactical

    Type of production: Industrial
    Production Country: Taiwan
    Blade: CTS-XHP Stainless Steel 60 / 61HRC
    Blade treatment: Satin finish
    Handle: G10
    Blade length: 139mm.
    Blade thickness: 4mm.
    Closed Length: 190mm.
    Overall length: 324mm.
    closed Thickness: 13mm.
    Weight: 234g.
    Closing: Tri-Ad Lock
    Clip: removable and reversible, stainless steel
    Packaging: cardboard box with Cold Steel logos
    Notes: Design by Andrew Demko

    12519
    €187.70
    Out of stock
  18. Spyderco - Matriarch 2 - C12SBK2 - knife

    Spyderco - Matriarch 2 - C12SBK2 - knife

    Intended Use: EDC / Sports / Collection

    Type of production: Industrial
    Production Lama: Japan
    Blade: stainless steel VG-10
    Treatment Lama: -
    Handle: FRN Black
    Blade length: 90mm.
    Blade thickness: 2mm.
    Closed Length: 125mm.
    Overall length: 210mm.
    Thick when closed: -
    Balancing: -
    Weight: 98g.
    Closure: Back Lock
    Clips: stainless steel
    Sheath: -
    Packaging: Cardboard box with logos Spyderco
    Notes: -

    C12SBK2
    €0.00
    Only -20 left
    Only -20 left
    Out of stock
  19. Spyderco - Delica 4 Madreperla e Marmo Picasso by SantaFe Stoneworks - C11S

    Destinazione d'uso: Collezione

    Tipo di produzione: industriale (lama) ed artigianale (impugnatura)
    Lama: in acciaio inox VG-10 58HRC
    Trattamento Lama: -
    Produzione Lama: Japan
    Manicatura: interamente realizzata a mano da SantaFe Stoneworks, in Marmo Picasso e Madreperla
    Lunghezza lama: 75mm.
    Spessore della lama: 2.5mm.
    Lunghezza chiuso: 107mm.
    Lunghezza totale: 180mm.
    Bilanciatura: -
    Peso: 145g.
    Chiusura: Back Lock
    Clip: amovibile, in acciaio inox
    Fodero: -
    Note: impugnatura artigianale in pietra dura realizzata con la tecnica del mosaico

    10847
    €245.08
    Out of stock
  20. Microtech - Socom Delta - Tanto full Serrated - Black G-10 - 163-12 - coltello

    The Microtech Socom Delta knife is the next generation of this classic folder and the winner of the "American Made Knife of the Year" at the 2012 BLADE Show. The Socom Delta features Microtech's titanium sub-lock tab and G10 composite handles, 3D machined with a subtle yet effective texture. The handle has bead blast finished hardware, pocket clip and a titanium back-strap with lanyard hole. Torx T30 pivot adjustment screw. This Socom Delta has a Tanto blade of S35VN steel with a bead blast finish and a partially serrated edge. The blade is deployed with ambidextrous thumb studs. The fit and finish of the Socom Delta Tanto is excellent, just as you'd expect from Microtech. Specifications: Overall Length: 9" Blade Length: 4" Cutting Edge: 3.75" Blade Steel: S35VN Blade Finish: Bead Blast Blade Edge: Partially Serrated Handle Material: Black G10 Closed Length: 5" Weight: 4.6 oz. Made in the USA
    10043
    €381.15
    Rating:
    98%
    4.9
    Out of stock
  21. Spyderco - Lil Matriarch coltello - C162SBK - coltello

    Spyderco - Lil Matriarch knife - C162SBK - knife

    Intended use: EDC / Sports
    Type of production: Industrial
    Blade Production: Japan
    Blade: stainless steel VG-10
    Treatment Lama: -
    Handle: FRN
    Blade length: 75mm.
    Blade thickness: 2mm.
    Length closed: 107mm.
    Total length: 180mm.
    Thick when closed: -
    Balance: -
    Weight: 70g.
    Closure: Back Lock
    Clip: Stainless Steel
    Sheath: -
    package:
    Cardboard box with logos Spyderco
    Notes: -

    11000
    €113.93
    Rating:
    87%
    4.4
    Out of stock
  22. Cold Steel - Mini Tuff Lite Serrated - 20MTS - coltello chiudibile

    Destinazione d'uso: Sportivo/EDC

    Tipo di produzione: Industriale
    Produzione Lama: Taiwan
    Lama: in acciaio inox AUS-8A
    Manicatura: Grivory
    Lunghezza lama: 50mm.
    Spessore lama: 3mm.
    Lunghezza chiuso: 80mm.
    Lunghezza totale: 130mm.
    Peso: 42g.
    Chiusura: Tri-Ad Lock
    Clip: Acciaio inox
    Confezione: Scatola di cartone con loghi Cold Steel

    6518
    €28.69
    Rating:
    97%
    4.9
    Out of stock
  23. Fantoni - RRK - Race Rescue Knife - PC001 - coltelli

    Il coltello RRK (Race Rescue Knife) è stato sviluppato in collaborazione con l'RYA (Royal Yachting Association) allo scopo di servire da attrezzo multiruolo nell'ambito della sicurezza personale in una vasta gamma di applicazioni dinamiche.
    Il fodero RRK, unico nel suo genere, è stato progettatto per il fissaggio permanente a canotto, yacht, gommone o imbarcazioni di salvataggio.

    Destinazione d'uso: sportivo/rescue

    Tipo di produzione: Industriale
    Produzione Lama: Italia
    Trattamento lama : HBC + Teflon Lama: in acciaio AISI 425
    Manicatura: EPTR Thermorubber
    Lunghezza lama: 105mm.
    Spessore lama: 3mm.
    Lunghezza Totale: 215mm
    Peso: 223g.
    Fodero: Nylon 666 + Fiberglass
    Confezione: scatola in cartone con loghi
    1382
    €22.95
    Out of stock
  24. Spyderco - C08S Harpy - knife - coltello

    Spyderco - C08S Harpy - knife

    Intended use: Sport

    Type of production: Industrial
    Blade Production: Japan
    Blade: Stainless steel VG-10 (suitable for cut tops - ropes - networks - the machine belts etc.).
    Treatment Lama: -
    Handle material: steel
    Blade length: 70mm.
    Blade thickness: 3mm.
    Closed Length: 95mm.
    Total length: 164mm.
    Thick when closed: 8mm
    Balance: -
    Weight: 104g.
    Closure: Back Lock
    Clip: Stainless Steel
    Sheath: -
    Packaging: cardboard box with logos Spyderco
    Notes:

    0223
    €135.25
    Out of stock
  25. Spyderco - Civilian knife - C12GS knife

    Intended use: tactical

    Type of production: industrial
    Blade production: Japan
    Blade: VG-10 stainless steel
    Blade treatment: -
    Handle: G-10 carrier with stainless steel right liner
    Blade length: 106mm.
    Blade thickness: 3mm.
    Closed length: 132mm.
    Total length: 234mm.
    Balancing: -
    Weight: 234g.
    Closure: Back Lock
    Clip: in stainless steel, reversible and removable
    Scabbard: -
    Note:

    C12GS
    €307.38
    Only 0 left
    Only 0 left
    Out of stock
  26. Spyderco - Delica 4 Stainless Steel SpyderEdge - C11S coltelli

    Destinazione d'uso: Sportivo

    Tipo di produzione: industriale
    Lama: in acciaio inox VG-10 58HRC
    Trattamento Lama: -
    Produzione Lama: Japan
    Manicatura: in acciaio inox
    Lunghezza lama: 75mm.
    Spessore della lama: 2.5mm.
    Lunghezza chiuso: 107mm.
    Lunghezza totale: 180mm.
    Bilanciatura: -
    Peso: 115g.
    Chiusura: Back Lock
    Clip: amovibile, multiposizione, in acciaio inox
    Fodero: -
    Note: -
    SP-C11S
    €114.75
    Only 0 left
    Only 0 left
    Out of stock
  27. Spyderco - Dragonfly Stainless Steel Serrated - SC28S - coltello

    Destinazione d'uso: EDC/Sportivo

    Tipo di produzione: Industriale
    Produzione Lama: Japan
    Lama: in acciaio inox VG-10
    Trattamento Lama: -
    Manicatura: acciaio inox
    Lunghezza lama: 58mm.
    Spessore lama: 2mm.
    Lunghezza chiuso: 80mm.
    Lunghezza totale: 140mm.
    Spessore da chiuso: -
    Bilanciatura: -
    Peso: 74g.
    Chiusura: Back Lock
    Clip: in acciaio inox, amovibile
    Fodero: -
    Confezione: Scatola di cartone con loghi Spyderco
    Note: -

    2265
    €110.66
    Only -99 left
    Only -99 left
    Rating:
    80%
    4
    Out of stock
  28. Spyderco - Endura 4 Stainless Steel SpyderEdge - C10S - coltello

    Destinazione d'uso: Sportivo

    Tipo di produzione: industriale
    Lama: in acciaio inox VG-10
    Trattamento Lama: -
    Produzione Lama: Japan
    Manicatura: Acciaio Inox
    Lunghezza lama: 95mm.
    Spessore della lama: 3mm.
    Lunghezza chiuso: 125mm.
    Lunghezza totale: 220mm.
    Bilanciatura: -
    Peso: 161g.
    Chiusura: Back Lock
    Clip: amovibile, multiposizione, in acciaio inox
    Fodero: -
    Note: -
    3669
    €147.54
    Only 0 left
    Only 0 left
    Rating:
    100%
    5
    Out of stock
  29. Spyderco - Ladybug Stainless Steel - LSSP3

    Destinazione d'uso: Sportivo/EDC

    Tipo di produzione: Industriale
    Produzione Lama: Japan
    Lama: in acciaio inox VG-10
    Trattamento Lama: -
    Manicatura: acciaio inox
    Lunghezza lama: 49mm.
    Spessore lama: 2mm.
    Lunghezza chiuso: 62mm.
    Lunghezza totale: 111mm.
    Spessore da chiuso: 8mm.
    Bilanciatura: -
    Peso: 36g.
    Chiusura: Back Lock
    Clip: -
    Fodero: -
    Confezione: astuccio di cartone con loghi Spyderco
    Note: -
    3759
    €0.00
    Only -99 left
    Only -99 left
    Out of stock
  30. Spyderco - Manix 2 G10 - C101GS2 knife

    Intended Use: Sport / EDC

    Type of production: Industrial
    Production Lama USA
    Blade: Stainless steel 154CM
    Treatment Lama: -
    Handle: G-10 with stainless steel liners
    Blade length: 86mm.
    Blade thickness: 3mm.
    Length closed: 117mm.
    Total length: 203mm.
    Thick when closed: 19mm.
    Balance: -
    Weight: 152g.
    Closure: Ball Bearing Lock
    Clip: Stainless Steel
    Sheath: -
    Packaging: cardboard box with logos Spyderco
    Notes: -

    3745
    €122.13
    Out of stock
  31. Spyderco - Pacific Salt Black - C91SBK2 - coltello

    Destinazione d'uso: sub/sportivo

    Tipo di produzione: Industriale
    Produzione Lama: Japan
    Lama: in acciaio all'azoto H1
    Trattamento Lama: -
    Manicatura: FRN
    Lunghezza lama: 95mm.
    Spessore lama: 3mm.
    Lunghezza chiuso: 123mm.
    Lunghezza totale: 220mm.
    Spessore da chiuso: 15mm.
    Bilanciatura: -
    Peso: 82g.
    Chiusura: Back Lock
    Clip: amovibile, in acciaio inox
    Fodero: -
    Confezione: scatola in cartone nera e rossa con loghi Spyderco
    Note: Questo coltello ha una lama in acciaio PH (precipitation hardened) che non arrugginisce in quanto contiene solo lo 0.15% di carbonio e circa lo 0.10% di azoto risultando particolarmente adatto ad usi subacquei e marini. I voti prodotto sono quindi dati tenendo conto di questo utilizzo primario.
    3699B
    €118.85
    Out of stock
  32. Spyderco - Pacific Salt Yellow - C91SYL - coltello

    Destinazione d'uso: sub/sportivo

    Tipo di produzione: Industriale
    Produzione Lama: Japan
    Lama: in acciaio all'azoto H1
    Trattamento Lama: -
    Manicatura: FRN
    Lunghezza lama: 95mm.
    Spessore lama: 3mm.
    Lunghezza chiuso: 123mm.
    Lunghezza totale: 220mm.
    Spessore da chiuso: 15mm.
    Bilanciatura: -
    Peso: 82g.
    Chiusura: Back Lock
    Clip: amovibile, in acciaio inox
    Fodero: -
    Confezione: scatola in cartone nera e rossa con loghi Spyderco
    Note: Questo coltello ha una lama in acciaio PH (precipitation hardened) che non arrugginisce in quanto contiene solo lo 0.15% di carbonio e circa lo 0.10% di azoto risultando particolarmente adatto ad usi subacquei e marini. I voti prodotto sono quindi dati tenendo conto di questo utilizzo primario.
    3699
    €118.85
    Out of stock
  33. Spyderco - Rescue Wave - C14SGYW coltello

    Destinazione d'uso: Sportivo/soccorso

    Tipo di produzione: industriale
    Lama: in acciaio inox VG-10 58HRC
    Trattamento Lama: -
    Produzione Lama: Japan
    Manicatura: gray FNR con liners annegati in acciaio inox
    Lunghezza lama: 94mm.
    Spessore della lama: 3mm.
    Lunghezza chiuso: 115mm.
    Lunghezza totale: 207mm.
    Bilanciatura: -
    Peso: 78g.
    Chiusura: Back Lock
    Clip: in acciaio teflonata
    Fodero: -
    Note: gancio Wave per apertura facilitata patented by Emerson Knives sviluppato originariamente per le unità speciali U.S. Navy SEALs
    3697
    €106.56
    Out of stock
Set Ascending Direction

33 Items





ecommerce sicuro