Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Fox - Phi - Bali Knife by Vincenzo Fiore - FX-570TI - Knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390
Blade finish: Satin
Handle: Titanium
Blade length: 115mm. (edge length 95mm.)
Blade thickness: 4mm.
Total length: 255mm.
Weight: 138g.
Locking system: not present
Clip: not present
Packaging: Cardboard box with Fox logos - Leather pouch
Notes: Design by Vincenzo Fiore, designer specialised in balisong - Each piece is numbered, but this is not a limited edition.FX-570TI -
Boker Plus - Specialist Half Tool - 09BO831 - multipurpose knife
FUNCTIONS:
* Flat edge blade with LinerLock lock.
* Screwdriver holder bits with Philips screwdriver.
* Awl / Reamer / Parcel Opener.
* Sewing needle
* Scissors
* Glass breaker
* Nylon ScabbardMATERIALS:
* 3Cr13MoV Stainless Steel blade.
* 2Cr13 Stainless Steel toolsCountry of Production: China
Blade length: 79mm
Open length: 187mm
Length closed: 110mm
Thickness: 18mm
Weight: 127gBO-09BO831 -
Boker Plus - Scalpel by Alexander Krava - D2 - 02BO072 - neck knife
Surgical precision, a clean cut, and a sense of pride in what you've achieved: the Böker Plus scalpel knife by Alexander Krava provides the dexterity needed for everyday, delicate cutting tasks. The compact all-steel construction in D2 is modeled on a scalpel but convinces as an absolutely practical neck knife.
The bulbous blade has a satin finish and cuts through cardboard boxes with equal concentration and effortlessness, and steps in for crafts where scissors can go no further. Epoxy handle inserts and serrations on the wrist rest increase control while working. Supplied with a black ball chain and custom-made Kydex sheath.
Intended Use: Tactical / CQB
Production type: Industrial
Country of manufacture: Taiwan
Blade: D2 steel
Blade treatment: Stone Washed
Handle: D2 steel
Blade length: 42mm.
Blade thickness: 2.6mm.
Total length: 125mm.
Balance: -
Weight: 14g.
Sheath: Neck, in Kydex
Packaging: Cardboard box with Boker Plus logos
Notes: Design Alexander KravaBO-02BO072 -
Opinel - Picnic accessories - fork and spoon - outdoor accessory
Picnic + accessories will soon become indispensable for your nomadic meals!
Created in collaboration with designer Franck Fontana, the kit consists of:
- a microfiber napkin case for storing and cleaning items
- two inserts, a fork and a spoon, which are fixed on the handle of a N ° 08 knife (not included in the package)The inserts are made of stainless steel, to ensure comfort in the mouth, hygiene and sturdiness (compatible with No. 08 wooden handles with the double Virobloc safety device, on sale since 2000).
To attach the fork or spoon:
- with the knife blade in the closed position, open the ring nut
- fix the fork or spoon at the level of the ring in the small interstices
- close the ringCompact and lightweight, this easily transportable kit is made in France and replaces disposable cutlery.
op-a-picnic -
Ka-Bar - Wrench neck Knife - 1119 - knife
The KA-BAR Wrench Knife 1119 is a neck knife whose design is based on knives that are sometimes forged from old wrenches by knife enthusiasts. KA-BAR has used these characteristic shapes and transformed them into this cute knife.
KA-BAR used 425 to forge this knife. This is a slightly improved version of the popular 420 steel. Stainless, durable, easy to sharpen. The KA-BAR 1119 wrench knife comes with an elegant plastic sheath, without belt clip.
Intended use: Tactical / Utility
Type of production: Industrial
Country of production: USA
Blade: 425 stainless steel
Blade treatment: -
Handle: -
Blade length: 80mm.
Blade thickness: 5mm.
Total length: 182mm.
Weight: 91g.
Sheath: in ABS
Packaging: rigid packaging with Ka-Bar logos
Note: -The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand
KB-1119 -
Pohl Force - Charlie Three SW - D2 steel - 6011 - knife
With the new Charlie generation, designer Dietmar Pohl continues the successful series of minimalist and extremely durable knives. Whether for everyday use or as an ultra-flat reserve knife for outdoor activities, the new Charlie Three covers a wide range of applications.
The modern Spear Point blade and handle of the Charlie Three are made of 6-millimeter thick D2 tool steel, which gives the knife a level of strength and edge retention. The Stonewashed finish creates a scratch-resistant surface and increases the blade's corrosion resistance.
Using CNC technology, all details are elaborately milled on the handle specially designed for the new Charlie series. The rounded tang and grooved areas for the index finger and thumb ensure a comfortable and secure grip.
The Charlie Three BK comes with a sturdy, high-quality black Kydex sheath. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and secure carrying.
Intended Use: Tactical/SportingBlade: Full tang made of D2 steel at 59/60HRC with Stonewashed finish
Handle: -
Blade length: 95mm.
Blade thickness: 6mm.
Total length: 210mm.
Weight: 152g.
Sheath: kydex, with Tac-Clip (Tek-Lok type) multi-position attachment
Packaging: cardboard box with Pohl Force logos, Certificate of authenticity numbered and signedPF-6011 -
Kershaw - Camp 10 Machete - 1077 - Black - outdoor knife
Camp 10 is the ideal tool for the outdoors and for survival. The solid edge blade is made of 65Mn carbon tool steel which is characterized by its wear resistance. A black powder coating protects the steel and facilitates maintenance. The rubber-coated handle is super-durable and provides an extra-secure contoured grip. The handle has built-in hand protection and is perforated in both the front and back so you can attach a carrying lanyard to it. It features a black sheath with comfortable nylon straps.
Intended use: hard utility
Type of production: China industrial
Blade: 65Mn carbon steel
Blade treatment: Teflon coating
Handle: rubber
Blade length: 254mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 406mm.
Balance: advanced to 7.5cm.
Weight: 521g.
Closure: -
Clip: -
Sheath: Nylon GFN
Note:KE1077 -
Boker Plus - Urban Spillo Flipjoint - men's knife - 01BO469 - knife
Intended use: Sports
Type of production: Industrial
Country of production: Asia
Blade: in 440C stainless steel
Blade treatment: Stonewash
Handle: in steel
Blade length: 76mm.
Blade thickness: 3mm.
Total height of the lung: 176 mm.
Pesos: 67 g.
Clip: removable, in stainless steel
Closure: Slipjoint
Packaging: cardboard box with Boker Plus logos
Note: pinball opening system on ball bearingsBO-01BO469 -
Boker Plus - Kazhan knife by Alexander Krava - D2 - 02BO069 - knife
The Boker Plus Kazhan is designed by Alexander Krava and is a practical neck knife with a short Sheepfood-shaped blade, practical and light, ideal as a back-up tool. The young cutler from Lviv, Ukraine places particular emphasis on the aesthetics of his models, which convince not only as reliable tools but also as high-quality accessories. The skeletonized Kazhan is made of D2 with a dark stonewash finish. Supplied with chain and custom Kydex sheath.
Intended use: Tactical / CQB
Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: Stone Washed
Handle: D2 steel
Blade length: 56mm.
Blade thickness: 4mm.
Total length: 140mm.
Balancing: -
Weight: 62g.
Sheath: For neck, in Kydex
Packaging: Cardboard box with Boker Plus logos
Notes: Alexander Krava designBO-02BO069 -
ExtremaRatio - Satre - N690 Stone Washed - Neck Knife
Satre is a fixed blade knife of small dimensions, light and extremely resistant. Given its characteristics, it can be used in a wide range of disciplines and uses ranging from survival activities, bushcraft or as an element of an EDC (Every Day Carry) kit.
It has been designed in collaboration with Daniele Dal Canto, Master Advanced F.I.S.S. (Federazione italiana survival sportivo e sperimentale) instructor.
In Neck Knife mode, through the use of a 550 paracord lanyard, it is possible to hold it around the neck keeping the knife vertical with the handle facing downwards. The metal eyelets on the sheath, made of pre-shaped Kydex, allow the application of both the lanyard and the accessory holder.
The full-tang skeleton structure, allows to personalize the knife using the Paracord as a coating for the handle.
The Stone Washed version uses Böhler N690 heat treated to 58 HRC. This material is chosen for its ability to resist oxidation, the durability of the edge and above all the reliability it has shown over the years.
Intended Use: Neck Knife / Hiking / UtilityType of production: industrial
Country of production: Italy
Blade: Stainless steel N690Co 58/60HRC
Blade Treatment: Stone Washed
Handle: Stainless steel N690Co 58/60HRC
Blade length: 70mm.
Blade thickness: 5mm.
Total lenght: 163mm.
Weight: 78g.
Scabbard: Kydex, for neck.
Packaging: Cardboard box with Extrema Ratio logos.
Notes: possibility to use the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (available separately).ER-SAT-SW -
ExtremaRatio - DMP - Wolf Gray StoneWashed - Knife
DMP is a multi-role knife characterized by a strong versatility of use thanks to the small dimensions. The blade, drop point shape with reinforced tip, is particularly useful for heavy duty use. The full flat rounding gives excellent cutting characteristics.
The sheath is minimalist, stripped of most of the fabric adopting a retention system of 2nd level, going to recall the style of the model to which it is inspired. The main shell is made by injection in shockproof nylon. The secondary retention system is reversible for the ambidextrous portability of the knife.
Intended Use: Tactical / Multi-role
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Treatment: Stone Washed
Handle: Forprene
Blade length: 152mm.
Blade thickness: 6.3mm.
Total length: 282mm.
Weight: 283g.
Scabbard: Nylon
Packaging: Cardboard box with Extrema Ratio logos.
Notes: -ER-DMP-WG -
MKM - Edge - SlipJoint by Graciut - Titanium Bronze - MKEG-TBR - knife
Intended Use: Sporty / Gentleman / EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade Treatment: Satin
Handle: Titanium
Blade length: 76mm.
Blade thickness: 2.5mm.
Length closed: 102mm.
Total lenght: 174mm.
Thickness when closed: 12mm.
Weight: 72g.
Opening: two hands
Washers: Brass
Closure: Slip Joint
Clip: -
Scabbard: leather, with belt loop with magnetic release
Package: Cardboard box with logos MKM Maniago Knife Makers
Notes: Design by Bruno Bruna Graciut, Master CIC (Italian Knife Makers Guild)MK-EG-TBR -
Benchmade - Saddle Mountain Skinner knife CPM-S90V - 15002-1 - fixed knife
The 15002-1 Saddle Mountain Skinner is a premium hunting fixed blade knife designed for hunters around the world. Light, handy and robust, this knife is effective on medium / large game. The sheath, redesigned from the previous version, creates a slim, comfortable and safe housing. Improved geometry, ergonomics and materials used, this Benchmade model will not disappoint the expectations of even demanding hunters.
Intended use: Utility / Hiking / hunting
Type of production: Industrial
Production Lama: USA
Blade: CPM-S90V stainless steel (59-61 HRC)
Blade treatment: Satin
Handle: Richlite / Orange G10
Blade length: 106mm.
Blade thickness: 3.5mm.
Total length: 221mm.
Weight: 121g.
Sheath: in Boltaron® Thermoplastics
Packaging: Cardboard box with Benchmade logos
Note: -BM-15002-1 -
Nitecore - NSH10 EDC Multiuse Titanium Snap Hook - carabiner - tool
NITECORE NSH10 is a multipurpose carabiner made of TC4 titanium alloy.
Inspired by the design of the carabiner used as essential tools for rock climbing or bungee jumping, the NSH10 is a reliable tool for fixing or hanging external objects. Comfortable and versatile, it can be used as a key ring, bottle opener, hanging hook or flathead screwdriver.
Type of production: industrial
Country of production: ChinaFunctions:
* keychain
* bottle opener
* hook
* open parcels
* flathead screwdriverMaterial: titanium
Length and width: 49mm x 25.5mm
Thickness: 3.8mm
Weight: 7.5gNI-NSH10 -
ExtremaRatio - Contact Wolf Gray Knife Stone Washed - tactical knife
Intended use: Tactical / Multirole
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Stone Washed
Handle: Forprene
Blade length: 162mm.
Blade thickness: 6.3mm.
Total length: 293mm.
Weight: 300g.
Sheath: in Nylon
Packaging: Cardboard box with Extrema Ratio logos
Note: -Extrema Ratio developed the first knife of a new production line, called CONTACT.
It has a blade with a lance-shaped profile, a flat grinding and a diamond-shaped geometry. It has got a lower guard branch to protect itself from incidental cuts, upper jumping to improve grip, concave fuller along the length of the blade and a generous thickness blade (6.30mm) the now famous Requiem, revisited in proportions and in some technical features. The first of a new line of multipurpose knives.
The blade is made in Böhler N690 steel with a hardness of 58 HRC and a chemical burnishing coating for the Black version. All other colors in production have got a blade with Stone Washed finishing. The handle is still in forprene. It is more assembled by the side screws but thanks to the shank in truncated cone-shaped stainless steel that is screwed to the bottom and goes to fit inside a special seat, which makes it solid. In this way the knife is well balanced. The sheath is minimalist; most of the fabric has been cut off; it has got a 2nd level retention system, remembering the style of the model it was inspired by.
The main shell is injection-molded in shockproof nylon. The secondary retention system is reversible for ambidextrous users. The blade is guided through the conception of the blade. To extract the blade, to pressure the trigger will be sufficient, thus releasing the safety that holds securely in the sheath. In the horizontal slits of the sheath of a system, which fixes the blade to avoid shaking noises when it is stored inside. The back side of the nylon sheath is M.O.L.L.E. compatible.
The textile part is reduced to its minimum and has got the classic two-button safety strap with a belt loop Extrema Ratio aims to reduce the size of the knife, but not saving on the structural strength and safety accessories.
so be used as glass breakers
ER-CON-WG -
ExtremaRatio - Requiem Wolf Gray - tactical knife
Multi-purpose tactical knife with a light weight and very well-grip. The stiletto type blade is sharpened only on one side and has a guard. The Requiem is equipped with the innovative nylon liner Aspis expressly studied by Extrema Ratio to allow the quick release of the blade and the fixing inside the passages of the M.O.L.L.E system, thanks to two multiposition clips.
Intended use: Tactical / Multirole
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co hardened to 58HRC
Blade treatment: Satin
Handle: Forprene
Blade length: 118mm.
Blade thickness: 4mm.
Total length: 238mm.
Weight: 86g.
Sheath: Nylon with two multiposition clips, designed for M.O.L.L.E.
Packaging: cardboard box with Extrema Ratio logos
Note: -ER-REQ-WG -
ExtremaRatio - Mamba Wolf Gray - tactical knife
A compact and compact multi-role knife with ABS fast release sheath with two multiposition clips and tight enough to be secured inside the passers-through of the M.O.L.L.E. - Available in four color variants: Black, Desert, Ranger Green and HCS (Hybrid Coyote Sage)
Intended use: tactical / multi role
Type of production: industrial
Country of production: Italy
Blade: N690Co stainless steel hardened to 58HRC
Blade Treatment: Satin
Handle: Forprene
Blade Length: 116mm.
Blade thickness: 4mm.
Total Length: 237mm.
Weight: 85g.
Sheath: in ABS with two multiposition clips, designed for type M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos
Notes: -ER-MAM-WG -
ExtremaRatio - N.K.3 Karambit Stone Washed - Neck Knife - NK3K - knife
NK3 is a small knife that extends the family of the neck knives Extrema Ratio.
It differs from the models NK1 and NK2 for the largest size of the blade-type "long" 70mm. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.
On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.
The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.
intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Stone Washed
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 70mm.
blade thickness: 6.3mm.
total length: 172mm.
Weight: 95g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)ER-NK3K-SW -
ExtremaRatio - N.K.2 Stone Washed - Neck Knife - NK2
NK2 is a small knife that extends the family of the neck knives Extrema Ratio.
It differs from the model NK1 for blade-type "time" and for the increased thickness. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.
On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.
intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Stone Washed
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 50mm.
blade thickness: 6.3mm.
total length: 129mm.
Weight: 69g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)ER-NK2-SW -
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 75mm.
Blade thickness: 3mm
Overall length: 172mm
Weight: 42g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO07SL€23.77Only 4 left -
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 65mm.
Blade thickness: 3mm
Overall length: 153mm
Weight: 46g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO-06SL€21.31Only 12 left -
Maserin - Guru pocket tool - multipurpose compact
Maserin Guru Tool is the new ultra-compact tool is ideal as a prybar, nail drawer, screwdrivers and bit holder. The flat tip made of stainless steel makes it perfect for use both as a flat screwdriver as a lever that, chisel or core depending on the situation. Due to its weight and its small size will not even notice you have it, but is always ready and up to the task.
functions:
Chisel / Lever / prybar
Toglichiodi
screwdriver
Bit holder for screwdrivers
Features:
100% Stainless Steel
High portability ideal for traveling
Hole for lanyard / keychain
size:
8 cm (Length)
42 g (weight)MA-905C -
Conaz Consigli Scarperia - Fiorentino Bovino knife cm 24 - 50018 - knife
Scimitar "or" French "blade already present in the early twentieth century, production continued until the mid-1950s. The great success of this model, which was born in Scarperia has had national diffusion, is due to the fact that although it is very light it is elegant, robust and has great cutting capacity, due to the guessed shape of the blade. It is characterized by the presence of a metal "button" on the heel and a clamp at the other end of the handle.
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and nickel silver
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 243mm.
Weight: 148g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.R-FIC24 -
Maserin - Ghost pocket tool - multipurpose compact
Maserin Ghost Tool is the new ultra-compact tool is ideal as a prybar, nail drawer, screwdrivers and bit holder. The flat tip made of stainless steel makes it perfect for use both as a flat screwdriver as a lever that, chisel or core depending on the situation. Due to its weight and its small size will not even notice you have it, but is always ready and up to the task.
functions:
Chisel / Lever / prybar
Toglichiodi
screwdriver
Bit holder for screwdrivers
Features:
100% Stainless Steel
High portability ideal for traveling
Hole for lanyard / keychain
size:
8 cm (Length)
42 g (weight)MA-905/B -
Maserin - Skull pocket tool - multipurpose compact
Maserin Skull Tool is the new ultra-compact tool is ideal as a prybar, nail drawer, screwdrivers and bit holder. The flat tip made of stainless steel makes it perfect for use both as a flat screwdriver as a lever that, chisel or core depending on the situation. Due to its weight and its small size will not even notice you have it, but is always ready and up to the task.
functions:
Chisel / Lever / prybar
Toglichiodi
screwdriver
Bit holder for screwdrivers
Features:
100% Stainless Steel
High portability ideal for traveling
Hole for lanyard / keychain
size:
4 cm (Length)
42 g (weight)MA-905/A -
Maserin - Guru pocket tool - multipurpose compact
Maserin Guru Tool is the new ultra-compact tool is ideal as a prybar, nail drawer, screwdrivers and bit holder. The flat tip made of stainless steel makes it perfect for use both as a flat screwdriver as a lever that, chisel or core depending on the situation. Due to its weight and its small size will not even notice you have it, but is always ready and up to the task.
functions:
Chisel / Lever / prybar
Toglichiodi
screwdriver
Bit holder for screwdrivers
Features:
100% Stainless Steel
High portability ideal for traveling
Hole for lanyard / keychain
size:
8 cm (Length)
42 g (weight)MA-905/CF -
Maserin - Saw pocket tool - multipurpose compact
Maserin Saw Tool is the new ultra-compact tool is ideal as a prybar, nail drawer, screwdrivers and bit holder. The flat tip made of stainless steel makes it perfect for use both as a flat screwdriver as a lever that, chisel or core depending on the situation. Due to its weight and its small size will not even notice you have it, but is always ready and up to the task.
functions:
Chisel / Lever / prybar
Toglichiodi
screwdriver
Bit holder for screwdrivers
Features:
100% Stainless Steel
High portability ideal for traveling
Hole for lanyard / keychain
size:
8 cm (Length)
42 g (weight)MA-905/D -
Cold Steel - Pocket Bushman knife - 95FB
Cold Steel - Pocket Bushman - Cuchillo 95FB
Uso previsto: Sport
Tipo de producción: Industrial
Hoja de producción: Taiwan
Hoja: Acero inoxidable Krupp 4116
Tratamiento de la hoja: lavado a la piedra
Material de la manija: acero inoxidable 420
Longitud de la hoja: 113mm.
Grosor de la hoja: 3,5 mm.
Longitud cerrada: 150 mm.
Longitud total: 263mm.
Thick cerrado: 17mm.
Balance: -
Peso: 180 g.
Cierre: Carnero Segura
Clip: Acero inoxidable
Cubierta: -
Embalaje: Caja de cartón con logotipos Cold Steel
Notas: -CS95FB -
Hubertus Solingen - Outdoor knife - Vintage - sports knife
Type of production: industrial
Blade: 440 stainless steel
Blade treatment: -
Blade production: -
Handle: aluminum
Blade length: 11mm.
Blade thickness: 4.5mm.
Closed Length: -
Total length: 225mm.
Balancing: -
Weight: 144g.
Closure:
Clip: -
Sheath: in leather
Note: -HS-V-OUT€45.08Only 2 left -
Tops - Tom Brown - The Tracker - RMT Handles - TPTBT010RMT - knife
Intended Use: Tactical/Military/Survival
Type of production: Made in the USA, semi-crafted
Blade: 1095 58HRC carbon steel - Camo
Handle: Micarta RMT (Rocky Mountain Tread)
Blade length: 160mm.
Blade thickness: 6mm.
Total length: 302mm.
Balance: in coincidence with the lower guard branch.
Weight: 595g.
Sheath: made of kydex, with double metal multi-position clip
Notes: Design by Tom Brown; used in the 2003 film "The Hunted / The Prey" starring Benicio Del Toro and Tommy Lee JonesTPTBT010RMT -
Rudy Ruana Knives - Vintage Sticker Stag Horn - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably from the late 1970s/early 1980s.
* Condition: In very good condition
* Commercially available: Rudy Ruana passed away in 1986, Ruana knives are still in production and orderable on their site with waiting lists, but in different configurations from this one.
* Sharpening: Factory original, improvable, with some cosmetic abrasion.
* Marks on blade: Small horizontal marks due to insertion and removal from scabbard.
* Marks on handle: A few small marks on the aluminum handle.
* Packaging: -
* Scabbard: Leather, handcrafted, original, with a few small marks given by age.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended use: hunting / light hiking
Type of production: handcrafted
Country of production: USA
Blade: made of undeclared high carbon steel (presumably 1095 or 5160), hammer-forged, ground, individually oil-hardened and heat-treated using a zone tempering method that makes the back and tang of the blade softer than the cutting edge
Blade finish: satin-finished
Handle: cast aluminum directly on tang with beveled and riveted elk horn inserts. The tang runs inside the full length of the handle, and the cast aluminum produces a strong handle that is impossible to break.
Blade length: 125mm.
Blade thickness: 4.5mm.
Total length: 235mm.
Weight: 190g.
Sheath: handcrafted, leather, for vertical carrying on the belt
Packaging: -
Notes: Specimen presumably late 1970s/early 1980s in excellent condition - previously purchased knife from a private collection
Company History.
In 1938, Rudy Ruana began making knives in a small store in Montana. Members of his family continue to this day to handcraft Ruana knives in the same store. In 1964 Ruana's son-in-law, Vic Hangas, left a job with a telephone company and put his artistic talents to good use, joining Ruana in the business. Hangas' son Mark began working in the business in 1976. In 1983, Ruana retired at the age of 80 and sold the business to the Hangas family. In 1984 Mike Hangas joined his brother and father and the company was incorporated. Rudy Ruana died in April 1986. He was honored with posthumous induction into the American Bladesmith Society's Hall of Fame in 1997 and Blade magazine's Cutlery Hall of Fame in 2002.
Ruana knives are still handmade in the small Montana store where Rudy Ruana began forging blades more than 80 years ago. In an era of outsourcing and diminishing Made in America products, Ruana knives are still handmade in the United States, with a focus on quality rather than quantity. Although some things have changed over the years, still using the same methods and much of the same equipment used by Rudy Ruana.AP-RUAST -
Davide Ceroni - Trinidad Scorpion Custom Bali - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available On order.
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Original packaging present
* Scabbard: Original scabbard present.
* Manuals, Certificates and Warranties: Certificate of Warranty and Authenticity present.
* Checked and Certified by our in-house laboratory
Intended use: sports/collection
Type of production: handcrafted
Country of production: Italy
Blade: stainless steel RWL-34 60HRC
Blade finish: dual tone (satin finish and microblading)
Handle: channel handles and titanium TI6AL4V inserts, ball bearing movement
Blade length: 115mm.
Blade thickness: 4mm.
Length closed: 147mm.
Total length: 256mm.
Weight: 120g.
Closure: -
Clip: -
Sheath: Black leather pouch
Packaging: Leather pouch with zipper and certificate of authenticity and warranty made of steel, laser engraved
Notes: Designed and made entirely by hand in Italy by Davide Ceroni - Previously purchased 09/12/2021 specimen from private collectionAP-CKTRSC -
Chris Reeve - Ti-Lock Stone Washed - PRIVATE COLLECTION - folding knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Absent
* Scabbard: Absent
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory
The Ti-Lock mechanism was originally designed to isolate the locking mechanism from the handle of the knife so that it can offer greater freedom of design. Totally ambidextrous, the Ti-Lock is not meant to be a mere exercise in style, but should be understood as a mechanical innovation and a solid and reliable testament to the passion of Chris Reeve and Grant and Gavin Hawk.
Intended Use: Sporting/Collection
Type of production: Semi-manufactured
Country of Production: USA
Blade: CPM-S35VN 58/59HRC stainless steel
Blade Treatment: Stonewashed
Handle: Titanium 6AI4V Stone Washed
Blade Length: 82.5mm.
Blade Thickness: 3.2mm.
Length closed: 100mm.
Total length: 182.5mm.
Weight: 85g.
Closure: Ti-Lock titanium 6AI4V
Clip: Titanium 6AI4V
Packaging: -
Notes: Design by Grant and Gavin Hawk - Knife from a private collection.AP-0037SW -
Klotzli - 03-C Collection Series - Walker design - Titanium - PRIVATE COLLECTION - ATS-34 - knife
Knife withdrawn from a private collection, in like new condition with original box and certificate - Model dating back to the late 90s "made by Klotzli based on a design by the famous American designer Michael Walker. Knife that combines two qualities that are difficult to match, especially in those years; lightness and sturdiness Elegant gentleness, easy to open and close with one hand thanks to the Liner-Lock system invented by Walker himself.
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Available on the market Out of production
* Sharpening: Factory, perfect
* Marks on blade: No
* Marks on the handle: no
* Box: Present
* Sheath: in leather
* Manuals, Certificates and Warranties: Present
* Checked and certified by our internal laboratoryIntended use: sports / collection
Type of production: industrial
Country of production: Switzerland
Blade: ATS-34 stainless steel
Blade finish: Satin finish
Handle: Titanium
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 110mm.
Total length: 207mm.
Weight: 92g.
Closure: LinerLock
Clip: -
Notes: Design by Michael WalkerAP-KLO-03C -
Crusader Forge - VIS-T Tactical MK IV Titanium - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued
* Sharpening: Factory sharpened, perfect
* Marks on blade: No
* Marks on handle: Very small abrasion sengi on a couple of corners and on the clip.
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Collection/Tactical
Type of production: Midtech (semi-craft)
Country of manufacture: USA
Blade: stainless steel CPM-S30V/CF2 triple hardened 59/61HRC
Blade finish: Stone Washed
Handle: Titanium 6AL4V
Blade Length: 90mm.
Blade thickness: 5mm.
Length closed: 133mm.
Total length: 222mm.
Thickness when closed: 10.7mm.
Weight: 307g.
Closure: Frame Lock
Clip: Ttanium 6AL4V
Packaging: Cardboard box with Crusader Forge logos - certificate of guarantee and authenticity with knife data sheet
Notes: knife withdrawn from private collectionCF-VISTT-CP -
MKM & Mercury - Makro 1 knife Drop by Vox - Naked - MK MA01-N - sports knife
Intended use: Sporty
Type of production: Industrial by Mercury
Country of Production: Maniago - Italy
Blade: Full tang in M390 59/61 HRC stainless steel
Blade treatment: Stone washed
Handle: Naked
Blade length: 75mm.
Total length: 165mm.
Blade thickness: 4mm.
Weight: 48g.
Sheath: Black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Jesper VoxnaesMK-MA01-N -
MKM & Mercury - Makro 2 knife Sheepsfoot by Vox - Naked - MK MA02-N - sports knife
Intended use: Sports
Type of production: Industrial by Mercury
Country of production: Maniago - Italy
Blade: full tang in stainless steel M390 59/61 HRC
Blade treatment: Stone washed
Handle: Naked
Blade length: 75mm.
Total length: 165mm.
Blade thickness: 4mm.
Weight: 50g.
Sheath: black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Jesper VoxnaesMK-MA02-N -
Buck - Buckmaster 184 - 1984 First Production - PRIVATE COLLECTION - vintage knife
Knife withdrawn from private collection, dates from the very first production in 1984 (in fact, it does not indicate the patent engravings, affixed in 1985 and does not indicate the production date, affixed only from 1986). Globally in good condition, it has marks on the blade and handle due to the normal passage of time and the very aggressive scabbard which, containing a spring-loaded metal foil, irreparably scratches the blade both in insertion and extraction - It still has the factory sharpening and comes with a compass in the tang and two harpoons already engaged on the guard branch; lacking instead the box and additional accessories - Checked and certified by our in-house laboratory.
Intended Use: Sporting / CollectionType of production: Industrial
Country of manufacture: USA
Blade: knife made entirely of 425M stainless steel
Blade finish: satin-finished
Handle: hollow, stainless steel, with rear screw cap
Blade length: 185mm.
Blade thickness: 7.5mm.
Total length: 315mm.
Balance: set back from the guard branch
Weight: 675g.
Scabbard: black ABS
Notes: The feature, patented, is the presence of two removable screw-on harpoons/hooks. The function of these is simple anchorage. In fact, this knife can be used as a throwing hook by attaching a rope to the ring on the pommel. The manufacturer guarantees a harpoon hold of up to 600 pounds. The Navy Seals, specifically, had requested a knife that could be used underwater in order to anchor the vehicles to an underwater attachment point, and that is the reason for the total steel construction.CP-BUBM1984 -
Pohl Force - Charlie Two SW - D2 steel - 6001 - knife
With the new Charlie generation, designer Dietmar Pohl continues the successful series of minimalist and extremely durable knives. Whether for everyday use or as an ultra-flat reserve knife for outdoor activities, the new Charlie Two covers a wide range of applications.
The modern Spear Point blade and handle of the Charlie Two are made of 6-millimeter thick D2 tool steel, which gives the knife a level of strength and edge retention. The Stonewashed finish creates a scratch-resistant surface and increases the blade's corrosion resistance.
Using CNC technology, all details are elaborately milled on the handle specially designed for the new Charlie series. The rounded tang and grooved areas for the index finger and thumb ensure a comfortable and secure grip.
The Charlie Two comes with a sturdy, high-quality black Kydex sheath. The Tac-Clip belt adapter, which can be mounted in various positions, allows flexible and secure carrying.
Intended Use: Tactical/SportingBlade: Full tang made of D2 steel at 59/60HRC with Stonewashed finish
Handle: -
Blade length: 95mm.
Blade thickness: 6mm.
Total length: 210mm.
Weight: 152g.
Sheath: made of kydex, with Tac-Clip (Tek-Lok type) multi-position attachment
Packaging: cardboard box with Pohl Force logos, Certificate of authenticity numbered and signedPF-6001 -
GiantMouse - GMF1-F by Vox & Anso - M390 PVD Stonewashed - PRIVATE COLLECTION - knife
Knife withdrawn from private collection - Absolutely like new, untouched, never used, never put in the sheath - Supplied with box and warranty - Checked and certified by our in-house laboratory.
Intended Use: Sporting / HuntingType of production: Industrial
Country of manufacture: Maniago - Italy
Blade: full tang stainless steel M390 59/61 HRC
Blade treatment: PVD Stonewashed
Handle: stainless steel M390
Blade length: 60mm.
Total length: 135mm.
Blade thickness: 5mm.
Weight: 70g.
Sheath: leather sheath
Packaging: Cardboard box with GiantMouse ACE logos
Notes: Design by Jens Anso & Jesper Voxnaes - Knife withdrawn from private collection, absolutely like newGM-GMF1-FAP -
Tops - Fieldcraft - B.O.B. Brothers of Bushcraft knife - Hunter Tumble Finish - Gray micarta - knife
The Fieldcraft Knife was designed by The Brothers of Bushcraft, a group of nature activity enthusiasts. From tracking, to building shelters, the Brothers of Bushcraft are committed to training and educating people of all ages and genders to the passion of bushcraft.
The Fieldcraft Knife is the result of their knowledge and experience gained in the field; through experiences in the vast and humid rainforests, the arid and scorpion-strewn deserts and the freezing northern lands that span the Americas.
Intended use: Bushcraft / Utility
Type of production: Semi-Industrial
Production Lama: USA
Blade: full tang in 1095 steel 58 / 60HRC
Blade treatment: Ston wash and Satin
Handle: Micarta
Blade length: 120mm.
Blade thickness: 4.5mm.
Total length: 250mm.
Thick when closed: -
Weight: 274g.
Sheath: in Kydex with 360 ° rotatable metal belt clip and flintlock included
Packaging: Transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by a certificate of guarantee and authenticityTPBROSTBF02 -
Randall Knives - Model Triathlete skeleton Boot knife - PRIVATE COLLECTION - collection knife
Knife withdrawn from a private collection. Condition like new, production dating back to between 1996 and 2005, supplied with Randall artisan leather sheath. Checked and certified by our internal laboratory.
Intended use: hunting / collection
Type of production: artisanal
Production Lama: america
Blade: 440A stainless steel
Blade treatment: -
Handle: -
Blade length: 70mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 165mm.
Balance: set back, at 2cm.
Weight: 89g.
Closure: -
Clip: -
Sheath: Leather
Note:Each Randall model has been thoroughly tested in the field and has been shown to be properly modeled and designed for its particular use. Randall knives are 100% handmade and no two are exactly alike. The demand is so great for all models that it typically takes a few years to get the model ordered directly from Randall.
"Bo" Randall passed away on December 25, 1989 at his home. Bo and his son Gary have run the business side by side for over twenty five years. Gary continues the tradition of handcrafted knives that carry the Randall Made brand along with his children, Jason and Michael.
AP-TRI-SK-RK -
Tops - Tom Brown - The Tracker Camo knife - TPTBT010C - knife
Tops - Tom Brown - The Tracker
Intended use: Tactical / Military / Survival
Type of production: semi industrial
Blade: 1095 58HRC carbon steel - Camo
Handle: Micarta
Blade length: 160mm.
Blade thickness: 6mm.
Closed length: - mm.
Total length: 302mm.
Balancing: coinciding with the lower guard branch
Weight: 595g.
Closure: -
Clip: -
Sheath: in kydex, tactical with double multi-position clip
Notes: Design by Tom Brown, used in the film The Hunted with Benicio Del Toro, entirely handmade in the USA, each knife is numbered and accompanied by a certificate of guarantee and authenticity.TPTBT010C -
ExtremaRatio - N.K.1 Neck Knife - SanMai V-TOKU2 - Limited Edition - NK1 - Knife
Japanese steel merges with Italian excellence
For this 2021 collaboration, exclusive to Coltelleria Collini, we have decided to propose a series of best sellers produced by Extrema Ratio. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically we have used the carbonaceous V-Toku2 at 62/63HRC for the central plate and the stainless SUS410 for the two external plates, in order to guarantee a very high cutting capacity, penetration and edge holding together with an easy resharpening and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase of resilience given by the type of extreme steel and the laminated structure.
Intended Use: Neck Knife / Collector's Knife
Type of production: Industrial
Country of Production: Italy
Blade / Handle: Full, laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62/63HRC and SUS410 (stainless steel) outer cheeks
Blade finish: Satin finish
Blade length: 40mm.
Blade thickness: 3mm.
Total length: 129mm.
Weight: 55g.
Sheath: Kydex, for neck.
Packaging: Cardboard box with Extrema Ratio logos.
Notes: Numbered edition - cardboard box with Extremaratio logos and certificate - the central core of the blade and handle is made of carbon steel so it is recommended to wash/dry the knife very well after each use and protect the steel, during storage, with a light surface of lubricant to avoid rust and oxidation.As in the ancient swords of the Japanese Samurai.
The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: It is made of different types of metals alloyed together to create a composite that contains and intensifies the strengths of the metals individually taken:
- Longer cutting edge life
thanks to the use of high quality steels with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performance decidedly superior to those achieved with the use of traditional steels.- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.- Improved aesthetic performance
Knives made of multi-state steel or damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.ER-NK1-CC -
Aitor - Jungle King I knife Satin - 16015 - knife
The Jungle King is a sturdy multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. Inside the sheath there is also a steel skinner knife.
Intended use: Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 205mm.
Blade thickness: 5mm.
Total length: 355mm.
Weight: 607g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logosAI-16015 -
Boker - Magnum Collection 2021 - Limited Edition - 02MAG2021 - fixed knife
Intended Use: Collection / Utility
Production type: Industrial
Country of Production: Taiwan
Blade: ful tang in D2 steel
Blade finish: Satin finish
Handle: Micarta
Blade length: 134mm.
Blade thickness: 5mm.
Total length: 252mm.
Weight: 233g.
Sheath: Black leather
Package: gift box with certificate of guarantee and microfiber cleaning cloth.
Notes: Limited and numbered edition of 1999 pieces - Design by Jesper Voxnaes (Vox)BO-02MAG2021 -
Nieto - ToolKnife - PRIVATE COLLECTION - multipurpose knife
Knife withdrawn from a private collection - Like new condition, never used - Product made and patented around the end of the 90s by the Spanish Nieto. Checked and certified by our internal Collini Cutlery laboratory.
Through a rotation mechanism inside the handle, activated thanks to an unlocking pin, this multi-tool allows you to use a 13 cm blade or a 13 cm tool but complete with 16 uses.
Intended use: Survival / Sportsman
Blade: AN-556 stainless steel
Handle: Metal
Blade length: 120mm.
Blade thickness: 3mm.
Length closed: -mm.
Total length: 295mm.
Balancing: backward, 6cm from the lower guard branch
Weight: 325g.
Closing: -
Clip: -
Sheath: leather with screwdriver insert
Note: -NI-MT-CP -
Nitecore - NTK05 EDC Ultra-Tiny Titanium Keychain Knife - cutter
Ultra-Tiny keyring knife, made of TC4 titanium alloy and made with precise CNC machining.
The NTK05 model uses a No. 11 scalpel blade, easily replaceable and accessible in the market.The comfortable 35-degree grip ensures stability and cutting precision.
The elegant and tapered design allows it to be attached to a key ring, to a backpack, to use it as a mini EDC or as a pendant.Type of production: industrial
Country of production: China
Blade: replaceable, in stainless steel, N.11 Scalpel Blade
Handle: unibody in titanium with the following sizes 55mm x 12mm x 3mm
Blade length: 20mm.
Blade thickness: 0.3mm.
Total length open: 96mm with blade completely extracted
Weight: 5g.
Clip: -
Packaging: Cardboard box with Nitecore logos
Note: -NI-NTK05 -
Ontario Knife Company - Wyvern Crash Axe - 8693 - Axe
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: full tang in 5160 carbon steel
Blade treatment: powder coating
Handle: micarta
Cutting length: 140mm.
Blade thickness: 6.5mm.
Total length: 480mm.
Balancing: advanced
Weight: 1130g.
Sheath: nylon, M.O.L.L.E compatible, rigid polypropylene insert
Packaging: transparent thermoplastic bag
Note: -ON8693 -
Ontario Knife Company - Cerberus Titanium Folder - 1776 - knife
Intended use: Sportsman / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: in steel tool D2
Blade treatment: Satin
Handle: Titanium
Blade length: 105mm.
Blade thickness: 3mm.
Closed length: 140mm.
Total length: 235mm.
Thick when closed: 13.8mm.
Weight: 172g.
Opening: through thumbstood, ambidextrous
Washers: in Teflon
Closure: Frame Lock with stainless steel leaf
Clip: stainless steel, deep pocket type, reversible and removable
Packaging: Cardboard box with Ontario Knife Company logos
Note: -ON1776 -
Ontario Knife Company - Carter 2Quared Titanium Flipper - 8876 - knife
Intended use: Sportsman / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: in steel tool D2
Blade treatment: Blackwashed
Handle: Titanium
Blade length: 90mm.
Blade thickness: 5mm.
Length closed: 123mm.
Total length: 213mm.
Thick when closed: 14.5mm.
Weight: 176g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Frame Lock with stainless steel leaf
Clip: titanium, machined from solid, removable
Packaging: Cardboard box with Ontario Knife Company logos
Notes: Design by Robert CarterON8876 -
MKM - Fara by Burnley - Titanium - MKMY01-T - knife
Folding knife made by Mercury, with BÖHLER M390 MICROCLEAN steel blade, satin finish, two-hand opening with fingernail, rotation mechanism with PTFE washers, slip joint system without blade lock, stainless steel screws with ring nut on rotation pin blue anodized titanium, stainless steel spring.
Intended use: Sports / Gentleman / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: Satin
Handle: Titanium
Blade length: 74mm.
Blade thickness: 2.5mm.
Length closed: 117mm.
Total length: 180mm.
Thick when closed: 11mm.
Weight: 90g.
Opening: two-handed
Washers: in steel
Closure: Joint Slip
Clip: -
Sheath: leather pocket with belt loop
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Lucas Burnley - Knife manufactured by MercuryMK-MY01-T -
Glock - Field Knife 81 knife with saw - Gray - knife
The Glock knives were developed in close cooperation with the Special Force Ranger Austrian army. To achieve the best performance and functionality, were not allowed compromises in design, tested after years of service in the field. The knife is so perfectly balanced, used as a pure fighter, such as a utility knife or throwing knife.
BACK SIGNED
Blade: Carbon steel painted in 1050
Handle material: Thermoplastic Polymers
Blade length: 165 mm.
Blade Thickness: 5 mm.
Total length: 290 mm.
Weight: 205 g.
Sheath: Thermoplastic PolymersG81-GY -
EOS Elite Outfitting Solutions - Prawn Black Friction Folder Carbon / Aluminum - knife
Intended use: Tactical / EDC / Collection
Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: black
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -EOS-P-CF-AL-B -
EOS Elite Outfitting Solutions - Prawn Friction Folder Aluminum Tanto - knife
Intended use: Tactical / EDC / Collection
Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -EOS-P-A-T -
EOS Elite Outfitting Solutions - Prawn Friction Folder Tanto Carbon/Aluminum - knife
Intended use: Tactical / EDC / Collection
Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -EOS-P-CF-AL-T -
EOS Elite Outfitting Solutions - Prawn Friction Folder Carbon / Aluminum - knife
Intended use: Tactical / EDC / Collection
Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -EOS-P-CF-AL -
Chris Reeve - Green Beret 7" Dark Earth by W. Harsey - 2017 Version - knife
Purpose: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Dark Earth PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyGB7-1003 -
Boker Plus - Gitfo-Da by DJ Urbanowsky - 02BO054 - knife
Target: Tactical / CQB
Type of production: Industrial
Country of Origin: Taiwan
Blade: 440C stainless steel
Blade Treatment: Stone Washed
Handle: 440C stainless steel
Blade Length: 53mm.
Blade thickness: 5mm.
Total length: 135mm.
Balance: -
Weight: 57g.
Sheath: Neck, in Kydex
Packing: Cardboard box with Boker Plus logos
Notes: DJ Urbanovsky DesignBO-02BO054 -
Bastinelli Knives - Diagnostic - Karambit Neck Knife
Use target: neck knife
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Stone Washed
Handle: stainless steel N690Co
Blade Length: 38mm.
Blade thickness: 4mm.
Total length: 99mm.
Balance: -
Weight: 23g.
Sheath: Neck, in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMDBC-04SW -
Benchmade - Morpho - Gold Class - Damascus Limited Edition - 51-161 - knife
Intended Use: collection
Type of production: Industrial
Country of Origin: USA
Blade: Damascus steel with Ripple design
Blade treatment: -
Handle: Titanium with inserts damask Ripple
Blade length: 100mm.
Blade thickness: 2.5 mm.
Closed Length: 132mm.
Overall length: 230mm.
Thick when closed: 13mm
Weight: 156g.
Closing: absent
Clip: absent
Sheath: black leather, with belt loop
Packaging: Cardboard Box "Gold Class" with Benchmade logos, warranty card, metal box with magnetic closure
Notes: Limited edition produced in only 100 copies - Exemplary serialized with issue # 53BM-51-161 -
G. Sakai - Backpacker - 16L - vintage knife
Intended use: hunting / sport
Type of production: Industrial seeds
Blade: ATS-34 stainless steel
Country of production: Seki - Japan
Handle: solid aluminum, with rubber inserts
Blade length: 75mm.
Blade Thickness: 3mm.
Overall length: 172mm.
Closed Length: 98mm.
Locking system: back lock
Weight: 110g.
Sheath: nylon and leather
Packaging: cardboard box with logos G.Sakai
Notes: Knife of the early 90s, brand new, mint conditions12576 -
ExtremaRatio - N.K.3 Stone Washed - Neck Knife - NK3 - knife
NK3 is a small knife that extends the family of the neck knives Extrema Ratio.
It differs from the models NK1 and NK2 for the largest size of the blade-type "long" 70mm. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.
On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.
The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.
intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Stone Washed
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 70mm.
blade thickness: 6.3mm.
total length: 153mm.
Weight: 82g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)12450 -
Consigli Scarperia - Zuava Cattle Polished R-ZXC19 - knife
Zuava Cattle Polished R-ZVC19 - knife
Traditional knife of Scarborough and is used in all of Tuscany to the first 800. He had an element of novelty, for its time: the metal frame inside the handle as well in traditional cattle.
Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 19 cm.
Weight 100 gr.R-ZXC19 -
Conaz Consigli Scarperia - Zuava ox horn - cm 19 - 50077 - knife
Traditional Scarperia knife and used throughout Tuscany until the early 1800s. It had an element of novelty, for the time: the metallic structure inside the handle as well as in the traditional bovine.
440 stainless steel blade.
Blade length 8 cm.
Blade thickness 3 mm.
Open length 19 cm.
Weight 100 gr.50077 -
Conaz Consigli Scarperia - Palmerino horn cattle PA2C20 two blades - knife
Palmerino horn cattle PA2C20 two knives - knife
The production of Scarborough has not devoted much attention to penknives.
It was, however, made a template from the desk, which in the past was used to make the tip of the quill pens and pencils.
This sharpener Scarperia was always devoid of spring and could have from one to two blades; unmistakable the shape of the handle, in a single piece of horn.
In the catalogs of the early years of the twentieth century these items were listed as "sharpeners use Palmerini" which was actually the name of a renowned manufacturer of the nineteenth century.
Proposed model is at the tip of the horn two blades.Stainless steel blade 440.
Blade length 4.6 cm.
Blade thickness 2.5 mm.
Overall length 15 cm.
Weight 40 gr.PA2C20 -
ExtremaRatio - N.K.1 Stone Washed - Neck Knife
Intended Use: Neck Knife
Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel N690Co 58/60HRC
Treatment Blade: Stone Washed
Handle material: stainless steel N690Co 58/60HRC
Blade length: 40mm.
Blade thickness: 3mm.
Length closed: -
Overall length: 129mm.
Thick when closed: -
Balancing: -
Weight: 55g.
Closure: -
Clip: -
Sheath: Kydex, Neck
Packaging: Cardboard box with logos Extrema Ratio
Note: use of the sheath with MOLLE systems or Tek-Lok (not included in the package)ER-NK1-SW -
Chris Reeve - Ti-Lock Stone Washed - design by Grant and Gavin Hawk knife
The Ti-Lock mechanism was originally designed to isolate the locking mechanism from the handle of the knife so we can offer greater design freedom. Fully ambidextrous, the Ti-Lock does not want to be a mere exercise in style, but must be understood as an innovation and mechanics as a solid and reliable evidence of the passion of Chris Reeve and Grant and Gavin Hawk.
Intended Use: Sport / Collection
Type of production: Semi-Craft
Production Lama USA
Blade: stainless steel CPM-S35VN 58/59HRC
Treatment Blade: Stonewashed
Handle: Titanium 6AI4V Stone Washed
Blade length: 82.5mm.
Blade thickness: 3.2mm.
Closed Length: 100mm.
Total length: 182.5mm.
Thick when closed: -
Balance: -
Weight: 85g.
Closure: Ti-Lock Titanium 6AI4V
Clip: Titanium 6AI4V
Sheath: -
Packaging: Cardboard box with logos Chris Reeve
Notes: Design by Grant and Gavin Hawk0037SW -
Conaz Consigli Scarperia - Zuava knife Buffalo horn "in the old way" 50091 - knife
Traditional Scarperia knife and used throughout Tuscany until the early 1800s.
It had an element of novelty, for the time: the metal structure inside the handle. As well as in the traditional bovine, Consiglio proposes it today also in buffalo and exotic woods.Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Buffalo horn
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 19mm.
Weight: 93g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
50094