Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: still in production.
* Sharpening: Professionally re-sharpened.
* Marks on blade: None
* Marks on handle: a few small marks on clip, hardware, and aluminum spacer
* Box: Absent
* Scabbard: /
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory

Intended Use: Tactical

Production type: Industrial
Country of Production: Italy
Blade: N690Co 58HRC steel with Grade 5 titanium back (49-50HRC)
Blade finish: stonewashed
Handle: G10
Blade length: 91mm.
Blade thickness: 5mm.
Length closed 127mm.
Total length: 216mm.
Thickness when closed: 25mm.
Balance: Backward, 3cm from the top of the guard.
Weight: 186g.
Latch: Liner Lock, with manual insertion safety
Clip: Stainless steel, reversible
Notes: previously purchased knife, withdrawn from private collection

Intended use: tactical / sports

Type of production: Industrial
Country of production: Taiwan
Blade: SK-5 carbon steel
Blade treatment: Black Tuff-Ex painting
Handle: Kray-Ex (Kraton)
Blade length: 155mm.
Blade thickness: 5mm.
Total length: 275mm.
Balancing: on the guard branch
Weight: 230g.
Sheath: Secure-Ex in ABS
Packaging: cardboard box with Cold Steel logos

The Model 27 is an ideal all-purpose sports knife. This knife has a stainless steel blade, 5mm blade thickness and 147mm length with concealed tang construction. The handle has nickel silver guard and pommel and a leather and walnut wood ring handle with black micarta and nickel silver spacers. 

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Excellent condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: hunting

Type of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: made of leather and walnut wood rings with through-guard and nickel silver tang
Blade length: 147mm.
Blade thickness: 5mm.
Total length: 262mm.
Balance: backward
Weight: 230g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

Randall Made Knives' Model 11 is the original drop-point blade. Designed in 1952 by Alaskan guide Tommy Thompson it is designed for skinning large prey, has the tip lowered below the top of the blade to avoid cutting too deeply into skins when using the tip first.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: hunting

Type of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: ergonomic, walnut wood with through-guard and brass tang
Blade length: 130mm.
Blade thickness: 5mm.
Total length: 245mm.
Balance: backward
Weight: 290g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

This Lynx model knife from Wander Tactical is handcrafted and handcrafted by Dino and Alex, founders of Wander Tactical Research Team, known for their ability to create sturdy and reliable cutting tools. This custom knife represents excellence in Italian artisan cutlery, combining high quality materials with craftsmanship

Technical specifications:

Type of production: Artisan
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade finish: Marble Gun Coated
Handle: Micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 237mm.
Balancing: advanced
Weight: 293g.
Sheath: in Kydex, thermoformed
Packaging: without packaging, supplied with its own certificate of authenticity
Notes: Each knife is unique and handcrafted

The Fallkniven H1 knife is a very handy knife with impressive strength. The H1 is our first true hunting knife and encapsulates the history of Nordic Scandinavian cutlery art. Because of this heritage, the H1 does not have a standard finger guard, but grip security is improved by the ergonomic thermorun plastic handle.

The special design of the H1 blade is used to work game while hunting. The H1 knife may look different, but it works very well. In many ways, the performance of a knife depends on the person holding it. Knowing where and how to properly carve game goes beyond the knife. Hunters must avoid wrong cuts, keep hair off the meat, avoid cutting organs, and minimize blood flowing onto the game and the hunter. The combination of an experienced hunter and a well-designed knife is unbeatable!

Intended use: hunting

Type of production: Industrial
Country of manufacture: Sweden
Blade: Elmax SuperClean stainless steel at 61/62HRC
Blade finish: Satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 210mm.
Balance: backward
Weight: 175g.
Sheath: made of Zytel
Packaging: white cardboard case with Fallkniven logos
Notes: -

Explore the power of modernity and boldness with the OXYLOS FX-616 OL knife. Embodying the quintessence of contemporary pugnacity and aggressive design, this tool is more than just a bushcraft knife: it is an icon of innovation. With a BECUT stainless steel blade that promises durability and strength, combined with a sought-after satin finish for an elegant finish, the OXYLOS is ready to take on any challenge.

The olive wood handle offers a secure and comfortable grip, while stainless steel screws ensure strength and durability. Complete with a leather sheath for safe and stylish carrying, the OXYLOS is ready to be the ideal companion for outdoor adventurers.

Masterfully crafted in Italy, the OXYLOS is more than just a knife: it is an experience, a symbol of exceptional performance and timeless style.

Intended Use: Hunting / Hiking / Bushcraft / Utility

Type of production: Industrial
Country of manufacture: Italy
Blade: full tang in Becut 56/58HRC stainless steel
Blade treatment: Satin finish
Handle: Olive wood
Blade length: 130mm.
Blade thickness: 5mm.
Total length: 240mm.
Balance: On the guard branch
Weight: 270g.
Sheath: leather, belt, ambidextrous, for horizontal or vertical carry
Packaging: cardboard box with Fox logos
Notes: -

Explore the power of modernity and boldness with the OXYLOS FX-616 MB knife. Embodying the quintessence of contemporary combativeness and aggressive design, this tool is more than just a bushcraft knife: it is an icon of innovation. With a BECUT stainless steel blade that promises durability and strength, combined with a stone washed surface treatment for a rugged finish, the OXYLOS is ready to take on any challenge.

The black micarta handle offers a secure and comfortable grip, while stainless steel screws ensure strength and durability. Complete with a leather sheath for safe and stylish carrying, the OXYLOS is ready to be the ideal companion for outdoor adventurers.

Masterfully crafted in Italy, the OXYLOS is more than just a knife: it is an experience, a symbol of exceptional performance and timeless style.

Intended Use: Hiking / Bushcraft / Utility

Type of production: Industrial
Country of manufacture: Italy
Blade: full tang in Becut 56/58HRC stainless steel
Blade treatment: Stonewashed
Handle: Micarta
Blade length: 130mm.
Blade thickness: 5mm.
Total length: 240mm.
Balance: On the guard branch
Weight: 273g.
Sheath: leather, belt, ambidextrous, for horizontal or vertical carry
Packaging: cardboard box with Fox logos
Notes: -

In this new edition of the Defender FX-689, we have focused our attention on the blade, introducing an extraordinary 5 mm thick N690Co blade, which gives it particularly high strength. The handle features deep transverse grooves for an extremely secure grip.

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: N690Co 58/60HRC stainless steel
Blade treatment: Black Top Shield
Handle: FRN (Fiberglass Reinforced Nylon) with Black Top Shield steel guard and pommel
Blade length: 170mm.
Blade thickness: 5mm.
Total length: 320mm.
Weight: 360g.
Sheath: made of Kydex, with M.O.L.L.E. compatible loops.
Packaging: cardboard box with Fox logos
Notes: -

Use: EDC / Light Utility / All Round

Type of production: Handmade
Country of Production: Italy
Blade: integral, D2 steel at 59/61HRC
Blade treatment: Raw
Handle: Micarta
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 205mm.
Balance: backward
Weight: 214g.
Sheath: made of Kydex, thermoformed, with tek-lok type attachment
Packaging: certificate of guarantee and authenticity
Notes: Each knife is unique and handcrafted

The kiridashi is a traditional Japanese cutting tool that has ancient roots in culture and tradition; Extrema Ratio has revised according to its style this knife belonging to Japanese tradition giving it a more tactical look than the original. While retaining the characteristic chisel rounding, KIRI has a special tip designed to achieve a high penetration efficiency. 

Extrema Ratio KIRI is available in Dark Stone and Satin finishes, both made of Böhler N690 steel hardened to 58HRC. The handle consists of two black-colored anodized anticorodal aluminum grips. The preshaped Kydex sheath is equipped with metal eyelets that allow paracord lanyard to be attached to MOLLE system platforms as well.

Intended use: Neck knife / Utility

Type of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58/60HRC
Blade treatment: Dark Stone Washed
Handle: stainless steel N690Co 58/60HRC
Blade length: 60mm.
Blade thickness: 5mm.
Total length: 190mm.
Weight: 112g.
Sheath: in Kydex, for neck
Packaging: cardboard box with Extrema Ratio logos
Notes: possibility of using the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (may be purchased separately)

The kiridashi is a traditional Japanese cutting tool that has ancient roots in culture and tradition; Extrema Ratio has revised according to its style this knife belonging to Japanese tradition giving it a more tactical look than the original. While maintaining the characteristic chisel rounding, KIRI has a special tip designed to achieve a high penetration efficiency. 

Extrema Ratio KIRI is available in Dark Stone and Satin finishes, both made of Böhler N690 steel hardened to 58HRC. The handle consists of two black-colored anodized anticorodal aluminum grips. The preshaped Kydex sheath is equipped with metal eyelets that allow paracord lanyard to be attached to MOLLE system platforms as well.

Intended use: Neck knife / Utility

Type of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58/60HRC
Blade treatment: satin finish
Handle: stainless steel N690Co 58/60HRC
Blade length: 60mm.
Blade thickness: 5mm.
Total length: 190mm.
Weight: 112g.
Sheath: in Kydex, for neck
Packaging: cardboard box with Extrema Ratio logos
Notes: possibility of using the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (may be purchased separately)

We are proud to present a true gem in the world of knives: the exclusive Wander Tactical model, Mistral XL. This extraordinary edition is distinguished by its elegance and refinement, with a Raw Finish blade treatment that captures the essence of craftsmanship, coupled with a G10 desert handle, which not only offers a high-end aesthetic but also ensures a solid and comfortable grip.

This production is extremely limited and unique, made in only 4 separate pieces, making each one a collector's item with collector's value. The knife we present here is number 3 in this exclusive series, as confirmed by the certificate of authenticity.

Type of production: Handcrafted
Country of production: Italy
Blade: D2 steel at 59/61HRC
Blade Finish: Raw
Handle: G10 Desert
Blade length: 160mm.
Blade thickness: 5mm.
Total length: 310mm.
Balance: set back about 2cm. from the guard branch
Weight: 419g.
Sheath: made of Kydex, thermoformed, with MOLLE-compatible belt loop
Packaging: accompanied by polypropylene case 
Notes: limited series of four pieces different from each other, specimen #3 of #4

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased 
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, in excellent condition.
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory.

Designed specifically for the seven Mercury Program astronauts, the Model 17 accompanied these pioneers on the United States' first manned space flights. Astronaut Gordon Cooper contributed to the final design of this knife, making it not only a survival tool, but also a piece of history. Two examples of this knife, rich in historical value, are currently on display at the Smithsonian Institution.

Intended use: utility/military

Type of production: handcrafted
Country of manufacture: USA
Blade: 440B stainless steel
Blade finish: satin-finished
Handle: micarta, brass and duralumin
Blade length: 140mm.
Blade thickness: 5mm.
Total length: 256mm.
Balance: on the guard branch
Weight: 252g.
Sheath: Black Leather
Notes: previously purchased knife, withdrawn from private collection

Intended use: Tactical / Multirole

Type of production: Artisanal
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Raw
Handle: Micarta
Blade length: 110mm
Blade thickness: 5mm
Total length: 250mm
Balance: Rearward
Weight: 295g
Sheath: Thermoformed Kydex
Packaging: Certificate of warranty and authenticity
Note: Knife entirely handcrafted

Type of Production: Handcrafted
Blade Production: Italy
Blade: Apex Ultra steel at 63HRC
Blade Finish: Stone Washed
Handle: Ironwood, G10, and carbon pins
Blade Length: 90mm
Blade Thickness: 4.8mm
Total Length: 204mm
Balance: Set back 3cm from the guard branch
Weight: 179g
Sheath: Hand-stitched and crafted leather
Notes: unique knife handcrafted for Coltelleria Collini of Busto Arsizio - No. 310

Type of Production: Handcrafted
Blade Production: Italy
Blade: Apex Ultra steel at 63HRC
Blade Finish: Stone Washed
Handle: Stabilized Birch, G10, and carbon pins
Blade Length: 90mm
Blade Thickness: 4.8mm
Total Length: 204mm
Balance: shifted 3cm back from the guard branch
Weight: 179g
Sheath: hand-stitched and crafted leather
Packaging and Certificate: Cordura case and authenticity certificate
Notes: unique knife handcrafted for Coltelleria Collini of Busto Arsizio - No. 309

Intended Use: Tactical / Sporting

Production type: Industrial
Country of Production: USA
Blade: full tang in carbon steel CPM-3V
Blade treatment: Black Cerakote
Handle: G10 Black with stainless steel through-guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex, with Nylon belt attachment system, removable
Packaging: cardboard box with Zero Tolerance logos
Notes: limited edition Sprint Run edition (not numbered) designed for the international market only

As one of the four blacksmiths, the dwarf Dvalin created the Brisingamen necklace for the Germanic goddess of love, Freya. In Norse mythology, this special jewel is attributed with magic, love, but also pain and suffering. Freya's tears in the sky always promised rich fruits on the earth.

However, it was the wrath of the father of the gods, Odin, that often drove the goddess of love to unleash wars in the world of men. Dirk Hofmeister of Midgards Messer was inspired by the art of Nordic forging and created the folding blade version of the beloved Little Dvalin.

The powerful Dvalin Folder Tanto impresses with its compact dimensions and features a Tanto blade in D2 steel with ball bearings, finished with a rough stonewash appearance and equipped with a deep engraving on both sides to open the folding knife using the recess as a nail lever.

The engraving on the top of the blade offers a secure grip for the thumb during complex cutting operations. Despite the wrath of the gods, the well-formed and partly grooved G10 handle always fits firmly in the hand. On the back of the handle is the stainless steel Frame Lock that securely locks the blade.

With a commercial 3D printer, it is possible to print alternative handles in various shapes, colors, and materials. The Tip-Up (r) clip matches the handle's texture, while the lanyard hole increases ease of use. It comes with a high-quality nylon case for storage.

Intended use: Utility

Type of production: Industrial
Country of production: China
Blade: in D2 steel
Blade finish: stonewash
Handle: G10
Blade length: 71mm.
Blade thickness: 5.1mm.
Total length: 167mm.
Weight: 157g.
Clip: in steel
Packaging: cardboard box with Boker Plus logos
Notes: -

As one of the four smiths, the dwarf Dvalin crafted the Brisingamen necklace for the Germanic goddess of love, Freya. In Norse mythology, this special jewel was attributed with magic, love, but also pain and suffering. Freya's tears in the sky always promised rich fruits on earth.

However, it was the wrath of the father of the gods, Odin, that often drove the goddess of love to instigate wars in the world of men. Dirk Hofmeister from Midgards Messer was inspired by the art of Nordic forging and created the folding blade version of the beloved Little Dvalin.

The powerful Dvalin Folder Tanto stands out for its compact size and features a Tanto blade in D2 steel with ball bearings, finished with a rough stonewash appearance and equipped with a deep groove on both sides for opening the folding knife using the recess as a nail lever.

The groove on the top of the blade provides a secure support for the thumb during complex cutting operations. Despite the wrath of the gods, the well-formed and partially grooved G10 handle always fits firmly in the hand. On the back of the handle is the stainless steel Frame Lock that securely locks the blade.

With a commercial 3D printer, it is possible to print alternative handles in a variety of shapes, colors, and materials. The Tip-Up (r) clip mirrors the texture of the handle, while the hole for the lanyard enhances ease of use. It comes with a high-quality nylon case for storage.

Intended use: Utility
Production type: Industrial
Country of production: China
Blade: full tang in D2 steel
Blade finish: stonewash
Handle: G10
Blade length: 71mm.
Blade thickness: 5.1mm.
Total length: 167mm.
Weight: 157g.
Clip: in steel
Packaging: cardboard box with Boker Plus logos
Notes: -

Intended use: Light Utility/Hunting

Type of production: Industrial
Blade Production: Italy
Blade: Full Tang in N690Co stainless steel
Blade Treatment: Stonewash
Handle: Brown Micarta
Blade Length: 115mm.
Blade Thickness: 5mm.
Closed Length: -
Total Length: 250mm.
Thickness when closed: -
Balance: set back by 3cm
Weight: 245g.
Closure: -
Clip: -
Sheath: brown leather
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio Silvestrelli

Produced in Olean, NY, in collaboration with the skilled people at KA-BAR knives, the Spartan-Harsey Fighter is born from the partnership between William W. Harsey Jr. and Spartan Blades. The intention behind this knife was to combine the blade of a US military combat/utility knife with the contoured handle that has become a hallmark of Mr. Harsey's designs. This knife is a no-nonsense combat blade.

Intended Use: Tactical / Military

Production Type: Industrial
Country of Production: USA
Blade: 1095 carbon steel 56/58HRC
Blade Finish: Black Powder Coating
Handle: Injection-molded Thermoplastic
Blade Length: 155mm
Blade Thickness: 4.9mm
Overall Length: 292mm
Weight: 334g
Sheath: Thermoplastic, with belt attachment and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by William W. Harsey Jr. - The Professional Grade series with Silver packaging identifies American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with Ka-Bar's production experience to keep prices affordable for the public without sacrificing USA-made production.

Machai - A fitting name for this large cutting tool. In Greek mythology, the Machai were the demons (spirits) of battle and combat.

The high weight and recurved profile of this flat ground blade make it an excellent hatchet. The Machai has a full-tang construction and a handle that ensures a forward balance in the user's hand.

The textured Micarta canvas ergonomic handle ensures a secure and comfortable grip, whether wet or dry. Made by the good people at KA-BAR Knives; in Olean, NY, USA.

Intended use: Tactical / Military

Type of production: Industrial
Country of production: USA
Blade: in 1095 carbon steel 56/58HRC
Blade finish: Black Powder Coating
Handle: CE Canvas Micarta
Blade length: 165mm.
Blade thickness: 4.8mm.
Total length: 295mm.
Weight: 308g.
Sheath: Thermoplastic, multi-position, with M.O.L.L.E compatible belt attachments and button retention system
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Notes: Design by Iovito - The Professional Grade series with a Silver-colored box identifies American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find new products that combine the typical Spartan Blades designs with the production experience of Ka-Bar to keep public prices affordable without having to give up a made in USA production.

Intended use: Utility / Tactical / Outdoor

Type of production: Industrial
Country of production: Italy
Blade: Niolox 59/61HRC stainless steel with Black Idroglider finish
Handle: Bison Micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 230mm.
Balancing: advanced by 1cm
Weight: 235g.
Sheath: leather
Packaging: cardboard box with Fox logos
Note: -

The Harsey TT (Tactical Trout) is designed to be a very comfortable and sturdy medium-sized knife for most field tasks and defensive use. The size of the TT makes it easy to carry and handle.

The blade profile provides a clean cut with excellent tip strength. The full tang and handle of the Harsey TT provide neutral balance in the user's hand. The ergonomically shaped, linen Micarta handle provides a comfortable and secure grip when dry or wet. The pommel has a lanyard hole in the center of the angled tip. The TT is an excellent universal fixed blade, well balanced in size, function and feel. In our opinion, one of William Harsey's best designs.

After more than 40 years of service in the U.S. Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had already been designing and drawing knives for his friends in the Special Forces for years, and Mark, who had always been involved in military and tactical equipment when he served in the "Green Berets," decide to combine their skills and passion with the goal of building innovative and functional knives using the highest quality materials and made entirely in the United States.

Intended Use: Tactical/Military

Production Type: Mid Tech
Country of Production: USA
Blade: stainless steel CPM-S45VN 59/61HRC
Blade finish: ZrN Flat Dark Earth
Handle: Linen Micarta
Blade length: 114mm.
Blade thickness: 4.8mm.
Total length: 229mm.
Balance: on the guard branch
Weight: 209g.
Sheath: thermoformed in Kydex
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William Harsey

The Moros is an excellent choice for field or tactical use. This well-balanced blade is the perfect blend of size and performance. It's light enough to carry around without hassle, yet sturdy enough to handle a range of everyday tasks. The tip profile is flat with a tapered upper edge ensuring excellent cutting with good penetrating force. The full tang and grip of the Moros provide a neutral balance, making it light in the hand. The ergonomic and textured Micarta canvas grip ensures a comfortable and secure grip whether dry or wet.

After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had been designing and drawing knives for friends in special forces for years, and Mark, who had always dealt with military and tactical equipment while working in the "Green Berets," decided to combine their skills and passion with the goal of building innovative and functional knives using high-quality materials and entirely made in the United States.

Intended use: Tactical/Military

Type of production: Mid Tech
Country of production: USA
Blade: in CPM-S45VN stainless steel 59/61HRC
Blade finish: PVD Tungsten DLC Flat Black
Handle: Canvas Micarta
Blade length: 134mm.
Blade thickness: 4.8mm.
Total length: 254mm.
Balance: on the guard branch
Weight: 203g.
Sheath: thermoformed in Kydex
Packaging: Cardboard box with Spartan Blades logos

The Moros is an excellent choice for field or tactical use. This well-balanced blade is the perfect blend of size and performance. Light enough to carry without bothering, yet strong enough to handle a variety of daily tasks. The tip profile is flat with a tapered top edge that provides an excellent cut with good penetration force. The Moros' solid tang and handle provide neutral balance, making it light in the hand. The ergonomic, textured Micarta canvas handle provides a comfortable and secure grip when dry or wet.

After more than 40 years of service in the U.S. Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina. Curtis, who had already been designing and drawing knives for his friends in the Special Forces for years, and Mark, who had always been involved in military and tactical equipment when he served in the "Green Berets," decide to combine their skills and passion with the goal of building innovative and functional knives using the highest quality materials and made entirely in the United States.

Intended Use: Tactical/Military

Production Type: Mid Tech
Country of Production: USA
Blade: stainless steel CPM-S45VN 59/61HRC
Blade Finish: PVD Tungsten DLC Flat Black
Handle: Canvas Micarta
Blade length: 134mm.
Blade thickness: 4.8mm.
Total length: 254mm.
Balance: on the guard branch
Weight: 203g.
Sheath: thermoformed Kydex.
Packaging: cardboard box with Spartan Blades logos
Notes: Design by Curtis Iovito

Intended Use: Tactical / Military 

Type of production: Industrial
Country of Production: Italy
Blade: full tang in stainless steel N690Co
Blade finish: Stone Washed Black Idroglider
Handle: G10
Blade length: 70mm.
Blade thickness: 4mm.
Total length: 180mm.
Weight: 120g.
Sheath: kydex, with Tek-Lok-like attachment 
Packaging: Cardboard box with Fox-Wihongi logos
Notes: Design by Jared Wihongi (Special Forces CQC Instructor and SWAT Operator)

Intended Use: Tactical / Military 

Production type: Industrial
Country of Production: Italy
Blade: full tang in stainless steel N690Co
Blade finish: Stone Washed Black Idroglider
Handle: G10
Blade length: 70mm.
Blade thickness: 4mm.
Total length: 180mm.
Weight: 130g.
Sheath: kydex, with Tek-Lok-like attachment 
Packaging: Cardboard box with Fox-Wihongi logos
Notes: Design by Jared Wihongi (Special Forces CQC Instructor and SWAT Operator)

Intended Use: Tactical / Heavy Duty

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Black Powder Coating
Handle: made of Griv-Ex polymer, with steel pommel
Blade length: 267mm.
Blade thickness: 5mm.
Total length: 387mm.
Balance: Advanced
Weight: 474g.
Sheath: Secure-Ex ABS
Packaging: Cardboard box with Cold Steel logos
Notes: -

Extrema Ratio S-THIL STONE WASHED is a tactical backup knife with monolithic construction machined from a single piece of 5 mm thick BOHLER N690 steel, developed in collaboration with Thilo designer Arnd Schiller.

The blade, a spear point type, is hardened to 58 HRC in order to achieve the best balance of edge retention and strength, features a false counterbore at the top that enhances penetration and point work characteristics, and has a full-length groove (fuller) that flows elegantly from the blade to the handle. The blade is milled integrally to the knife to enhance its compactness and lightness, maintaining a minimal thickness while still having a profile reminiscent of the classic Extrema Ratio handle.

That profile goes to form two small guards and a comfortable thumb rest to prevent the hand from slipping towards the blade. On the end are a skull crusher with a diamond-shaped tip and a slot that allows a wrist strap to be attached to the knife or the handle to be fitted with paracord coiling.

The molded nylon sheath is designed to be extremely flat with very small side dimensions to make it as compact as possible. The design of the knife makes it ambidextrous, allowing it to be inserted into the sheath with the blade cutting edge to the right or left. The double retention system integral to the sheath consists of four pressure elements that work only two at a time, depending on right/left-handed use, while the nylon textile part has a button that allows the knife to be secured to the sheath.

The end of the sheath has a hole to expel liquids or debris inside. The ability to attach belt clip, ulticlip, malice clip makes it extremely versatile. You can also attach the sheath to the M.O.L.L.E. system by braiding the paracord.


Intended Use: Tactical/Multi-role

Production type: Industrial
Country of manufacture: Italy
Blade: stainless steel N690Co hardened to 58HRC
Blade treatment: Stonewashed
Handle: Steel N690Co 58HRC
Blade length: 119mm.
Blade thickness: 5mm.
Total length: 230mm.
Weight: 123g.
Sheath: Nylon
Packaging: cardboard box with Extrema Ratio logos
Notes: -

With a lower weight and smaller size than its big brother Big Leuku - the small Leuku is a versatile outdoor tool with properties slightly more similar to those of a bushcraft knife. The little Leuku is an all-round knife, capable of handling everything you can tackle in a woodland environment: cutting, separating bones, carving and many other tasks within the outdoors and wilderness survival.

The blade is made of forged carbon steel, and the handle is curly birch, coated with linseed oil, which ensures a firm grip, even when wet. Comes with a handcrafted sheath of vegetable tanned Finnish leather.

Intended use: Hunting/Sports

Type of production: artisanal
Blade: W75 60HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 140mm.
Blade thickness: 5mm.
Closed length: -
Total length: 265mm.
Balancing: -
Weight: 240g.
Closure: -
Clips: -
Sheath: in worked and hand-stitched leather
Note: -

Intended Use: Tactical

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Stonewashed
Handle: made of Griv-Ex polymer, with steel pommel
Blade length: 267mm.
Blade thickness: 5mm.
Total length: 387mm.
Balance: Advanced
Weight: 474g.
Sheath: Secure-Ex ABS
Packaging: Cardboard box with Cold Steel logos
Notes: Limited and numbered edition with serial number engraved on blade and with Lynn Thompson's autograph on box

Extrema Ratio S-THIL Black Warfare, a special version of the S-THIL model, is a backup knife with a monolithic structure machined from a single piece of 5 mm thick BOHLER N690 steel, developed in collaboration with the designer Thilo Arnd Schiller. The spear point type blade is hardened to 58 HRC in order to obtain the best balance between edge retention and strength, has a false edge in the upper part which enhances the characteristics of penetration and tip work, and is equipped with a Full length furrow flowing elegantly from blade to grip.

The blade is milled integrally with the knife to enhance its compactness and lightness, maintaining a minimum thickness even with a profile that recalls the classic Extrema Ratio handle. This profile forms two small guards and a comfortable thumb rest in order to prevent the hand from slipping towards the blade. On the end there is a skull crusher with a diamond-shaped tip and a slot that allows you to attach a wrist strap to the knife or to equip the handle with paracord winding.

The special Black Warfare version uses the innovative and original Geotech Camo pattern, created by laser engraving. The molded nylon sheath has been designed to be extremely flat and with very small lateral dimensions, in order to make it as compact as possible. The design of the knife makes it ambidextrous, allowing it to be inserted into the sheath with the cutting edge of the blade to the right or left. The double retention system integral with the sheath is made up of four pressure elements that work only two at a time, depending on right/left use, while in the nylon textile part there is a button that allows you to secure the knife to the sheath . The end of the sheath has a hole that allows you to expel liquids or residues inside. The possibility of applying belt clips, ulticlips, malice clips makes it extremely versatile. It is also possible to hook the sheath to the M.O.L.L.E. system. weaving the paracord lanyard.

The S-thil Black Warfare is supplied in an IP67 certified watertight Polypropylene technical case, with pressurization valve, resistant to atmospheric agents, dust and shocks. Inside there are also the Nylon sheath, the double ULTICLIP and the double grain sharpening plate (ceramic abrasive and synthetic diamond).

Intended use: Tactical / Multirole

Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel hardened to 58HRC
Blade treatment: BURNISHING MIL-C-13924 GEOTECH CAMO
Handle: N690 steel
Blade length: 119mm.
Blade thickness: 5mm.
Total length: 230mm.
Weight: 123g.
Sheath: in Kydex, with double multiposition ULTICLIP attachment clip
Packaging: Polypropylene case with S-Thil / Extrema Ratio logos
Notes: exclusive briefcase to celebrate the company's 25th anniversary

Intended use: Bushcraft / Outdoor

Type of production: Industrial
Country of production: China
Blade: D2 steel
Blade Treatment: Stonewashed
Handle: Black G10 with removable orange paracord
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 220mm.
Weight: 239g.
Sheath: Kydex, with Tek-Lok attachment
Packaging: cardboard box with BlackFox logos
Notes: Fire starter included, to be inserted in the scabbard - Design by Alfredo Doricchi

The Boker Plus Mini Tracker, designed by Dave Wenger, has quickly become a favorite in the bushcraft camping and dust scene, as a sturdy outdoor activity knife thanks to the massive 1095 carbon steel blade and corrosion resistant coating. The large Boker Plus Tracker is following in the footsteps of the small ... same materials, same features, but with unmatched performance! The massive survival knife blade features two different bevel surfaces, ideal for cutting, scraping, digging and prying. The optimal balance between the thickness, the length of the blade and the ergonomic shape of the finely worked micarta handle, allow you to work effortlessly even in extreme environments. The handle has three decorative brass hollow rivets, the back of which can be used as a lanyard hole. Supplied with a belt adapter and a custom made Kydex sheath.

Intended use: Utility

Type of production: Industrial
Country of production: Taiwan
Blade: 1095 steel ful tang
Blade finish: a powder cover
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5mm.
Total length: 310mm.
Weight: 469 g.
Sheath: in the Kydex
Packaging: cardboard box with Boker Plus logos
Note: design by Dave Wenger

The M3 is a small-sized fixed blade knife, useful in any field activity and easily transportable.

The M3 comes with a satin finish Niolox steel blade. The detachable grips are available in Micarta.

The M3 is equipped with a handle machined with 3D milling machines to achieve optimal ergonomics. Added to this is the surface texture that makes the grip firmer. The handle screws are in stainless steel with Torx T8 tightening system.

The M3 is sold together with the Cordura sheath for the version with Micarta handle.

Type of production: Industrial
Production Lama: Italy
Blade: SB1 Niolox 61HRC stainless steel
Blade treatment: Satin
Handle: Micarta
Blade length: 105mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 235mm.
Thick when closed: -
Balancing: -
Weight: 250g.
Closure: -
Clip: -
Sheath: Cordura
Packaging: Cardboard box with Lion Steel logos
Note: -

The M3 is a small-sized fixed blade knife, useful in any field activity and easily transportable.

The M3 comes with a satin finish Niolox steel blade. The detachable grips are available in Micarta.

The M3 is equipped with a handle machined with 3D milling machines to achieve optimal ergonomics. Added to this is the surface texture that makes the grip firmer. The handle screws are in stainless steel with Torx T8 tightening system.

The M3 is sold together with the Cordura sheath for the version with Micarta handle.

Type of production: Industrial
Production Lama: Italy
Blade: SB1 Niolox 61HRC stainless steel
Blade treatment: Satin
Handle: Micarta
Blade length: 105mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 235mm.
Thick when closed: -
Balancing: -
Weight: 250g.
Closure: -
Clip: -
Sheath: Cordura
Packaging: Cardboard box with Lion Steel logos
Note: -

Intended use: Bushcraft / Outdoor

Type of production: Industrial
Country of production: China
Blade: D2 steel
Blade treatment: Stonewashed
Handle: Black G10 with removable orange paracord
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 220mm.
Weight: 239g.
Sheath: in Kydex, with Tek-Lok type attachment
Packaging: cardboard box with BlackFox logos
Notes: Lock to light the fire included, to be inserted in the scabbard - Design by Alfredo Doricchi

The KA-BAR Wrench Knife 1119 is a neck knife whose design is based on knives that are sometimes forged from old wrenches by knife enthusiasts. KA-BAR has used these characteristic shapes and transformed them into this cute knife.

KA-BAR used 425 to forge this knife. This is a slightly improved version of the popular 420 steel. Stainless, durable, easy to sharpen. The KA-BAR 1119 wrench knife comes with an elegant plastic sheath, without belt clip.

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 425 stainless steel
Blade treatment: -
Handle: -
Blade length: 80mm.
Blade thickness: 5mm.
Total length: 182mm.
Weight: 91g.
Sheath: in ABS
Packaging: rigid packaging with Ka-Bar logos
Note: -

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended Use: Bushcraft / Outdoor

Production type: Industrial
Country of Production: China
Blade: Full tang in D2 59/61HRC steel
Blade Finish: Stonewashed
Handle: G10
Blade length: 140mm.
Blade thickness: 5mm.
Total length: 270mm.
Weight: 290g.
Sheath: kydex, with Tek-Lok type attachment
Packaging: cardboard box with BlackFox logos
Notes: Design by Denis Simonutti

Recommended Use: hiking / sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: full tang, stainless steel Niolox
Blade finish: Satin
Handle: Micarta
Blade length: 128mm.
Blade thickness: 5mm.
Total length: 252mm.
Weight: 274g.
Sheath: leather
Packaging: cardboard box with Lion Steel logos
Notes: -

Intended Use: Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: full tang, stainless steel 1.4116
Blade finish: satin finish
Handle: GFN
Blade length: 165mm.
Blade thickness: 5mm.
Total length: 298mm.
Weight: 330g.
Sheath: Secure-Ex® thermoplastic material
Packaging: cardboard box with Cold Steel logos
Notes: -

The CUMA Tak-Ri 3.5 is not your typical kukri. In fact, you have to understand what a Gurkha Kukri is to see the curve of its blade. The kukri (Devnagari/ खुकुरी), originally spelled khukri or khukuri, is a Nepalese curved knife. It is a traditional weapon of the Nepali people and also a weapon of choice/side arm for all Nepalis, including those serving in various armies around the world, but with the CUMA Tak-Ri we have gone further!

Once you have the CUMA Tak-Ri in your hands, you will quickly realize that it is "tough to the core." In fact, the Tak-Ri caused such a stir at the 2011 SHOT Show that Lou Ferrigno (the historic "Incredible Hulk") pre-ordered his directly at the TOPS Knives booth.

Intended Use: Hard Utility / Tactical

Type of Production: Semi-Industrial
Country of Manufacture: USA
Blade: full tang in 1095 58/60HRC steel
Blade Finish: Coyote Tan Coatung
Handle: Canvas Micarta
Blade Length: 178mm.
Blade thickness: 4.9mm.
Total length: 343mm.
Weight: 460g.
Scabbard: Nylon, belt-mounted, M.O.L.L.E. compatible.
Packaging: transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by certificate of guarantee and authenticity

Intended Use: Bushcraft / Utility

Production Type: Industrial
Country of Production: USA
Blade: full tang in 1095 58/60HRC steel
Blade Finish: Black Traction Coating
Handle: Micarta
Blade Length: 115mm.
Blade thickness: 4.8mm.
Total length: 225mm.
Weight: 219g.
Sheath: leather, belt, for vertical carry; Made in the USA
Packaging: cardboard box with ESEE logos.
Notes: modified handle version of Model 4, more suitable for precision work and bushcraft uses

Intended use: Hiking / Hunting

Production type: industrial
Country of Production: Japan
Blade: full tang, stainless steel Elmax at 61/62HRC
Blade finishing: black coating (Tungsten Carbide)
Handle: Thermorun
Blade Length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -

Intended use: Hiking / Hunting

Production type: industrial
Country of production: Japan
Blade: full tang, made of Elmax stainless steel at 61/62HRC
Blade finishing: satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -

Satre is a small, light and extremely resistant fixed blade knife. Given its characteristics, it is used in a wide range of disciplines and uses ranging from survival activity, bushcraft or as an element of an EDC (Every Day Carry) kit.

It was designed in collaboration with Daniele Dal Canto, Master Advanced F.I.S.S.S. (Italian Federation of Sports and Experimental Survival).

In Neck Knife mode, through the use of a paracord 550 cord, it is possible to keep it around the neck by keeping the knife vertically with the handle facing downwards. The metal eyelets on the sheath made of pre-shaped Kydex allow the application of both the lanyard and the accessory holder.

The full-tang skeletonized structure allows you to customize the knife using paracord as a coating for the handle

This Black version uses the Böhler N690 heat treated at 58 HRC. This material is chosen for its resistance to oxidation, the durability of the wire and above all the reliability it has shown over the years.

Intended use: Neck / Hiking / Utility Knife

Type of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Black
Handle: stainless steel N690Co 58 / 60HRC
Blade length: 70mm.
Blade thickness: 5mm.
Total length: 163mm.
Weight: 78 g.
Sheath: in Kydex, for neck
Packaging: Cardboard box with Extrema Ratio logos
Note: possibility to use the sheath with Ulti-Clip systems, M.O.L.L.E. o Tek-Lok (available separately)

Camp 10 is the ideal tool for the outdoors and for survival. The solid edge blade is made of 65Mn carbon tool steel which is characterized by its wear resistance. A black powder coating protects the steel and facilitates maintenance. The rubber-coated handle is super-durable and provides an extra-secure contoured grip. The handle has built-in hand protection and is perforated in both the front and back so you can attach a carrying lanyard to it. It features a black sheath with comfortable nylon straps.

Intended use: hard utility

Type of production: China industrial
Blade: 65Mn carbon steel
Blade treatment: Teflon coating
Handle: rubber
Blade length: 254mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 406mm.
Balance: advanced to 7.5cm.
Weight: 521g.
Closure: -
Clip: -
Sheath: Nylon GFN
Note:

Production type: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade finish: Black Blood
Handle: Micarta
Blade Length: 152mm.
Blade thickness: 5mm.
Total length: 297mm.
Balance: Advanced
Weight: 409g.
Sheath: Kydex, thermoformed, with M.O.L.L.E. compatible belt loop.
Package: unpacked, supplied with its own certificate of authenticity
Notes:Each knife is unique and handcrafted

The Cold Steel SRK (Survival Rescue Knife) has been a Cold Steel pride for over 25 years. Favorite knife for many military operators, still supplied to Navy SEALs today during BUDS training.

It is therefore not surprising that Cold Steel, when commissioned in-house designer Andrew Demko to develop a high-end tactical folding knife for military applications, was inspired by the legendary SRK!

The SR1's sturdy heavy-duty blade is made from US 5mm premium CPM-S35VN sintered steel

A good blade needs a good grip, so this model of the SR1 is made from G10.

For added reliability and safety, Cold Steel has equipped the SR1 with the famous Tri-Ad locking mechanism - proven time and again to be perfect for heavy-duty use.

Intended use: Sports / Utility

Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S35VN stainless steel
Blade treatment: Satin
Handle: OD Green G10
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note:

The Cold Steel SRK (Survival Rescue Knife) has been a Cold Steel pride for over 25 years. Favorite knife for many military operators, still supplied to Navy SEALs today during BUDS training.

It is therefore not surprising that Cold Steel, when commissioned in-house designer Andrew Demko to develop a high-end tactical folding knife for military applications, was inspired by the legendary SRK!

The SR1's sturdy heavy-duty blade is made from US 5mm premium CPM-S35VN sintered steel

A good blade needs a good grip, so this model of the SR1 is made from G10.

For added reliability and safety, Cold Steel has equipped the SR1 with the famous Tri-Ad locking mechanism - proven time and again to be perfect for heavy-duty use.

Intended use: Sports / Utility

Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S35VN stainless steel
Blade treatment: Stone Wash
Handle: OD Green G10
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note:

Intended Use: Hiking / Heavy Duty

Production Type: industrial
Blade: Full Tang in carbon steel SK-5 with Black Powder treatment
Country of Production: Taiwan
Handle: G-10
Blade Length: 196mm.
Blade thickness: 4.8mm.
Total length: 336mm.
Balance: Advanced
Weight: 402g.
Sheath: thermoplastic
Packaging: cardboard box with CRKT logos
Notes: Design by Austin McGlaun

Intended use: Sports / Utility

Type of production: Industrial
Country of production: Taiwan
Blade: 8Cr13MoV stainless steel
Blade treatment: Stone Wash
Handle: Griv-Ex ™
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note:

Intended use: Sports / Utility

Type of production: Industrial
Country of production: Taiwan
Blade: 8Cr13MoV stainless steel
Blade treatment: Stone Wash
Handle: Griv-Ex ™
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 195g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note:

Intended use: Utility / Tactical

Type of production: Industrial
Country of production: Italy
Blade: N690Co 58 / 60HRC stainless steel with stonewash finish
Handle: Black Canvas Micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 230mm.
Balance: advanced to 1cm
Weight: 190g.
Sheath: leather
Packaging: cardboard box with Fox logos
Note: -

Satre is a fixed blade knife of small dimensions, light and extremely resistant. Given its characteristics, it can be used in a wide range of disciplines and uses ranging from survival activities, bushcraft or as an element of an EDC (Every Day Carry) kit.

It has been designed in collaboration with Daniele Dal Canto, Master Advanced F.I.S.S. (Federazione italiana survival sportivo e sperimentale) instructor.

In Neck Knife mode, through the use of a 550 paracord lanyard, it is possible to hold it around the neck keeping the knife vertical with the handle facing downwards. The metal eyelets on the sheath, made of pre-shaped Kydex, allow the application of both the lanyard and the accessory holder.

The full-tang skeleton structure allows to personalize the knife using the Paracord as a coating for the handle.

The Black S600 version uses Böhler S600 steel. This steel is used in industrial manufacturing to make metalworking tools and in mold making.

The high content of Molybdenum, Tungsten and a good presence of Vanadium in its chemical composition, give it excellent qualities of hardness, wear resistance and toughness. The presence of Cobalt favors the formation of small carbides uniformly distributed, a characteristic that enhances and elevates wear resistance.

Satre S600 is hardened and cryogenically treated, thus reaching an exceptional hardness of 64 HRC. This gives it great wear resistance and the ability to guarantee the cutting edge of the wire for a long time.

Böhler S600 has 4.5% Chromium, which makes it a carbon steel and therefore can cause rust and oxidation if neglected. To better protect it from atmospheric agents, we have chosen the new external coating EXP DARK.

The high hardness and resistance to wear and abrasion, make this steel not easy to sharpen.

Intended Use: Neck Knife / Hiking / Utility

Production type: industrial
Country of production: Italy
Blade: Carbon steel Bohler S600 64HRC
Blade treatment: Black EXP DARK
Handle:in carbon steel Bohler S600 64HRC
Blade length: 70mm.
Blade thickness: 5mm.
Total length: 163mm.
Weight: 78g.
Scabbard: Kydex, for neck.
Packaging: Cardboard box with Extrema Ratio logos.
Notes: possibility to use the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (available separately).

Satre is a fixed blade knife of small dimensions, light and extremely resistant. Given its characteristics, it can be used in a wide range of disciplines and uses ranging from survival activities, bushcraft or as an element of an EDC (Every Day Carry) kit.

It has been designed in collaboration with Daniele Dal Canto, Master Advanced F.I.S.S. (Federazione italiana survival sportivo e sperimentale) instructor.

In Neck Knife mode, through the use of a 550 paracord lanyard, it is possible to hold it around the neck keeping the knife vertical with the handle facing downwards. The metal eyelets on the sheath, made of pre-shaped Kydex, allow the application of both the lanyard and the accessory holder.

The full-tang skeleton structure, allows to personalize the knife using the Paracord as a coating for the handle.

The Stone Washed version uses Böhler N690 heat treated to 58 HRC. This material is chosen for its ability to resist oxidation, the durability of the edge and above all the reliability it has shown over the years.

Intended Use: Neck Knife / Hiking / Utility

Type of production: industrial
Country of production: Italy
Blade: Stainless steel N690Co 58/60HRC
Blade Treatment: Stone Washed
Handle: Stainless steel N690Co 58/60HRC
Blade length: 70mm.
Blade thickness: 5mm.
Total lenght: 163mm.
Weight: 78g.
Scabbard: Kydex, for neck.
Packaging: Cardboard box with Extrema Ratio logos.
Notes: possibility to use the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (available separately).

Intended use: Utility

Type of production: Industrial
Country of production: China
Blade: ful tang in D2 steel
Blade finish: Stonewashed
Handle: G10
Blade length: 58mm.
Blade thickness: 4.7mm.
Total length: 160mm.
Weight: 93g.
Sheath: in Kydex
Packaging: cardboard box with Boker Plus logos
Notes: Design by Dirk Hofmeister - reversible clip integrated into the knife

Intended use: Utility

Type of production: Industrial
Country of production: China
Blade: SK-5 steel ful tang
Blade finish: Black PVD
Handle: Micarta
Blade length: 104mm.
Blade thickness: 5mm.
Total length: 220mm.
Weight: 200g.
Sheath: in Kydex with Tek-Lok type attachment
Packaging: cardboard box with Boker Plus logos
Notes: design by James Helm

Intended use: Hiking / Utility

Production type: industrial
Country of production: Japan
Blade: hidden tang, Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Thermorun
Blade length: 80mm.
Blade thickness: 4.8mm.
Total length: 181mm.
Balance: set back 2cm. from the guard branch
Weight: 132g.
Scabbard: zytel
Notes: Sharpening convex type

H.E.F.T. Hostile Environment Field Tool
Knife born from the collaboration between the American DPX Gear and the Italian company Lion Steel.

Knife withdrawn from a private collection - Globally in excellent condition, complete with original box and certificates - Checked, certified by our in-house Coltelleria Collini laboratory.

Intended use: Sports / Tactical

Type of production: Semi-Industrial
Production Lama: Italy
Blade: Sleipner Steel 60HRC
Blade treatment: black satin TiCN PVD coating
Handle: G10 Black
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 230mm.
Balance: central
Weight: 200g.
Designed: by Tommaso Rumici & Robert Young Pelton
Sheath: cordura
Packaging: cardboard box with DPX GEAR logos

Designation of use: Utility

Production type: Industrial
Country of Production: China
Blade: ful tang in D2 steel
Blade finish: Stonewashed
Handle: G10
Blade length: 106mm.
Blade thickness: 4.7mm.
Total length: 215mm.
Weight: 181g.
Scabbard: Kydex, with Tek-Lok type fitting
Packaging: Cardboard box with Boker Plus logos.
Notes: Design by Midgards Messer

Intended Use: Tactical / Military

Production Type: Industrial
Country of Production: USA
Blade: Carbon steel 1095 56/58HRC
Blade Finish: Black Powder Coating
Handle: CE Canvas Micarta
Blade Length: 139mm.
Blade Thickness: 4.8mm.
Total length: 273mm.
Weight: 255g.
Sheath: Thermoplastic, multi-position, with M.O.L.L.E. compatible belt clip and push-button retention system.
Packaging: Cardboard box with Spartan Blades Professional Grade logos
Note: Design by Iovito/Carey - The Professional Grade series with Silver box, identifies the American production made by Ka-Bar entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series you can find new products that combine the typical Spartan Blades designs with Ka-Bar's production experience in order to keep prices affordable to the public without having to renounce to a made in USA production.

Intended Use: Neck / Tactical / Military

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-8A 58/60HRC
Blade Finish: Black Powder Coating
Handle: Stainless steel AUS-8A 58/60HRC
Blade Length: 68mm.
Blade thickness: 4.8mm.
Total length: 159mm.
Weight: 80g.
Scabbard: Thermoplastic, multi-position, with push-button retention system.
Package: Cardboard box with Spartan Blades Field Grade logos.
Note: Design by Iovito/Carey - The Field Grade series with Bronze color box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (company formed by Spartan Blades and Ka-Bar). In this series you can find the most iconic Spartan Blades designs offered at very aggressive and competitive prices.

The Jungle King is a sturdy multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. Inside the sheath there is also a steel skinner knife.

Intended use: Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 205mm.
Blade thickness: 5mm.
Total length: 355mm.
Weight: 607g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logos

Intended use: collection / sporting

Production type: Industrial
Country of Production: Taiwan
Blade: Carbon steel CPM-3V
Blade treatment: satin finish
Handle: Kray-Ex (Kraton) with stainless steel guard and pommel
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 292mm.
Balance: on the guard branch
Weight: 269g.
Sheath: Secure-Ex ABS with nylon belt loop.
Packaging: cardboard box with Cold Steel logos
Notes: new version 2021 of the popular Master Tanto 6" produced by Cold Steel since the early 80's

Intended Use: Utility

Production type: Industrial
Country of Production: Taiwan
Blade: ful tang steel 1095
Blade finish: Powder coated
Handle: Micarta
Blade length: 135mm.
Blade thickness: 5mm.
Total lenght: 250mm.
Weight: 270g.
Sheath: Kydex
Packaging: Cardboard box with Boker Plus logos.
Notes: Design by Dave Wenger

Uso previsto: Deportivo / Senderismo / Supervivencia

Tipo de producción: Industrial
País de producción: Italia
Hoja: espiga completa, acero inoxidable Niolox a 59/61HRC
Tratamiento de la cuchilla: Acabado satinado
Mango: Micarta de yute negra
Longitud de la hoja: 186 mm.
Grosor de la hoja: 5mm.
Longitud total: 315 mm.
Peso: 370g.
Vaina: De cuero, con trabillas para llevarla en vertical.
Envase: Caja de cartón con logotipos de Fox
Notas: Diseño de Reichart Markus